Lessons from nature: stimuli-responsive polymers and their biomedical applications

Bioprinting of Cells, Organoids and Organs-on-a-Chip Together with Hydrogels Improves Structural and Mechanical Cues

The 3D bioprinting technique has made enormous progress in tissue engineering, regenerative medicine and research into diseases such as cancer. Apart from individual cells, a collection of cells, such as organoids, can be printed in combination with various hydrogels. It can be hypothesized that 3D bioprinting will even become a promising tool for mechanobiological analyses of cells, organoids and their matrix environments in highly defined and precisely structured 3D environments, in which the mechanical properties of the cell environment can be individually adjusted. Mechanical obstacles or bead markers can be integrated into bioprinted samples to analyze mechanical deformations and forces within these bioprinted constructs, such as 3D organoids, and to perform biophysical analysis in complex 3D systems, which are still not standard techniques. The review highlights the advances of 3D and 4D printing technologies in integrating mechanobiological cues so that the next step will be a detailed analysis of key future biophysical research directions in organoid generation for the development of disease model systems, tissue regeneration and drug testing from a biophysical perspective. Finally, the review highlights the combination of bioprinted hydrogels, such as pure natural or synthetic hydrogels and mixtures, with organoids, organoid-cell co-cultures, organ-on-a-chip systems and organoid-organ-on-a chip combinations and introduces the use of assembloids to determine the mutual interactions of different cell types and cell-matrix interferences in specific biological and mechanical environments.

Influence of Poly(Ethylene Glycol) Dimethacrylates' Chain Length on Electrical Conductivity and Other Selected Physicochemical Properties of Thermally Sensitive N-isopropylacrylamide Derivatives

Thermosensitive polymers P1-P6 of N-isopropylacrylamide (PNIPA) and poly(ethylene glycol) dimethacrylates (PEGDMAs), av. Mn 550-20,000, were synthesized via surfactant-free precipitation polymerization (SFPP) using ammonium persulfate (APS) at 70 °C. The polymerization course was monitored by the conductivity. The hydrodynamic diameters (HDs) and the polydispersity indexes (PDIs) of the aqueous dispersion of P1-P6 in the 18-45 °C range, assessed via dynamic light scattering (DLS), were at 18° as follows (nm): 73.95 ± 19.51 (PDI 0.57 ± 0.08), 74.62 ± 0.76 (PDI 0.56 ± 0,01), 69.45 ± 1.47 (PDI 0.57 ± 0.03), 196.2 ± 2.50 (PDI 0.53 ± 0.04), 194.30 ± 3.36 (PDI 0.56 ± 0.04), 81.99 ± 0.53 (PDI 0.56 ± 0.01), 76.87 ± 0.30 (PDI 0.54 ± 0.01), respectively. The electrophoretic mobilities estimated the zeta potential (ZP) in the 18-45 °C range, and at 18 °C they were as follows (mV): -2.57 ± 0.10, -4.32 ± 0.67, -5.34 ± 0.95, --3.02 ± 0.76, -4.71 ± 2.69, -2.30 ± 0.36, -2.86 ± 0.42 for polymer dispersion P1-P6. The polymers were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), H nuclear magnetic resonance (1H NMR), thermogravimetric analysis (TG/DTA), Differential Scanning Calorimetry (DSC), and powder X-ray diffraction analysis (PXRD). The length of the cross-linker chain influences the physicochemical properties of the obtained polymers.

Designing intelligent bioorthogonal nanozymes: Recent advances of stimuli-responsive catalytic systems for biomedical applications

Bioorthogonal nanozymes have emerged as a potent tool in biomedicine due to their unique ability to perform enzymatic reactions that do not interfere with native biochemical processes. The integration of stimuli-responsive mechanisms into these nanozymes has further expanded their potential, allowing for controlled activation and targeted delivery. As such, intelligent bioorthogonal nanozymes have received more and more attention in developing therapeutic approaches. This review provides a comprehensive overview of the recent advances in the development and application of stimuli-responsive bioorthogonal nanozymes. By summarizing the design outlines for anchoring bioorthogonal nanozymes with stimuli-responsive capability, this review seeks to offer valuable insights and guidance for the rational design of these remarkable materials. This review highlights the significant progress made in this exciting field with different types of stimuli and the various applications. Additionally, it also examines the current challenges and limitations in the design, synthesis, and application of these systems, and proposes potential solutions and research directions. This review aims to stimulate further research toward the development of more efficient and versatile stimuli-responsive bioorthogonal nanozymes for biomedical applications.

Thermal-responsive β-cyclodextrin-based magnetic hydrogel as a de novo nanomedicine for chemo/hyperthermia treatment of cancerous cells

A novel thermal-responsive β-cyclodextrin-based magnetic hydrogel [β-cyclodextrin-graft-poly(N-isopropylacrylamide)/Fe3O4 (β-CD-g-PNIPAAm/Fe3O4)] was fabricated as a novel nanomedicine for chemo/hyperthermia treatment of cancer cells. Firstly, β-CD was modified by maleic anhydride (MA) followed by copolymerization with NIPAAm monomer and thiol-end capped Fe3O4 nanoparticles (NPs) in the presence of a crosslinker through acrylamide-thiol polymerization system to afford a magnetic hydrogel. The saturation magnetization (δ s) value for developed hydrogel was determined to be 8.2 emu g-1. The hydrogel was physically loaded with an anticancer agent, doxorubicin hydrochloride (Dox). The encapsulation efficiency (EE) of drug into the hydrogel was obtained as 73 %. The system represented acceptable thermal-triggered drug release behavior that best fitted with Higuchi model, demonstrating the release of drug is mostly controlled by diffusion mechanism. The anticancer performance of the β-CD-g-PNIPAAm/Fe3O4-Dox was evaluated using MCF7 cells by MTT-assay. In addition, flow cytometry analyses showed considerable cellular uptake of Dox in the cells treated with β-CD-g-PNIPAAm/Fe3O4-Dox (∼70 %) compared to free Dox (∼28 %). As results, in time period of 48 h by combination of chemo- and hyperthermia-therapies, the developed system displayed greater anticancer efficiency than the free Dox.

Regioselective synthesis of 4-arylamino-1,2-naphthoquinones in eutectogel as a confined reaction medium using LED light

Predicting selectivity and conversion in a confined reaction medium under photochemical conditions is highly challenging as compared to the corresponding conventional synthesis. Herein, we report the use of a simple carbohydrate-derived eutectogel to facilitate LED-light-induced regioselective synthesis of 4-arylamino-1,2-naphthoquinones in good yield. This methodology, by including a reusable reaction medium, proved to have the potential of affording the regioselective formation of various desired products in good yields.

Recent Updates on Nanocarriers for Drug Delivery in Posterior Segment Diseases with Emphasis on Diabetic Retinopathy

In recent years, various conventional formulations have been used for the treatment and/or management of ocular medical conditions. Diabetic retinopathy, a microvascular disease of the retina, remains the leading cause of visual disability in patients with diabetes. Currently, for treating diabetic retinopathy, only intraocular, intravitreal, periocular injections, and laser photocoagulation are widely used. Frequent administration of these drugs by injections may lead to serious complications, including retinal detachment and endophthalmitis. Although conventional ophthalmic formulations like eye drops, ointments, and suspensions are available globally, these formulations fail to achieve optimum drug therapeutic profile due to immediate nasolacrimal drainage, rapid tearing, and systemic tearing toxicity of the drugs. To achieve better therapeutic outcomes with prolonged release of the therapeutic agents, nano-drug delivery materials have been investigated. These nanocarriers include nanoparticles, solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), dendrimers, nanofibers, in-situ gel, vesicular carriers, niosomes, and mucoadhesive systems, among others. The nanocarriers carry the potential benefits of site-specific delivery and controlled and sustained drug release profile. In the present article, various nanomaterials explored for treating diabetic retinopathy are reviewed.

Preparation of Tamsulosin Hydrochloride-Loaded Mucoadhesive In Situ Gelling Polymeric Formulation for Nasal Delivery in Geriatrics

This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.

Azopolyesters with Intrinsic Crystallinity and Photoswitchable Reversible Solid-to-Liquid Transitions

Herein, we introduce a variety of azopolyesters (azobenzene-based polyesters) with remarkable intrinsic crystallinity and photoinduced reversible solid-to-liquid transition abilities from copolymerization of azobenzene-based epoxides with cyclic anhydrides. The length of the soft alkyl side-chain inlaid with azobenzenes and stereoregularity of main-chain of azopolymers have tremendous effects on crystallization properties of the resulting polyesters with melting temperature (Tm ) in the range of 51-251 °C. Moreover, some of azopolyesters possess excellently photoinduced reversible solid-to-liquid transition performance thanks to trans-cis photoisomerization of azobenzenes. Trans-azopolyesters are yellow solids with Tm s or glass transition temperatures (Tg s) above room temperature, whereas cis-polymers are red liquids with Tg s below -20 °C. These azopolyesters could be applied as novel light-switchable adhesives for quartz/quartz, wood/wood and quartz/wood adhesion, with the strength in the range of 0.73-0.89 MPa for trans-polymers. Conversely, the adhesion strength of liquefied cis-azopolyesters generated from the irradiation of trans-polymers by UV light was about 0.1 MPa, which shows light enable to control the adhesion process with high spatiotemporal resolution.

pH-Responsive Membranes from Self-Assembly of Poly(2-(dimethylamino)ethyl methacrylate) Brush Silica Nanoparticles

We have prepared novel pH-responsive nanoporous membranes by the self-assembly of silica nanoparticles carrying poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes with a degree of polymerization (DP) in the 100-450 range. The nanoparticles were prepared by surface-initiated ARGET-ATRP, and the membranes were assembled by pressure-driven deposition onto porous supports. The permeability and pore size of the resulting robust membranes were studied using water and hexane flux and filtration cutoff experiments. The pore size of the PDMAEMA "hairy" silica nanoparticle (HNP) membranes measured by water flux was ca. 22 nm and was mostly independent of the polymer brush length. We attributed this to a combination of the PDMAEMA brushes swelling and their permeability to water. In contrast, the pore size measured by hexane flux strongly depended on the DP. The flux and pore size of these membranes in water strongly depended on the pH. The pore size decreased by a factor of 1.6 when the pH was changed from neutral to acidic. pH-Responsive HNP membranes combine many attractive properties, including control over the filtration cutoff, responsive permeability, and high flux at low pressure. The reversible self-assembly of the PDMAEMA HNP membranes may help not only in their facile preparation but also in material recycling if biofouling occurs. The key features of the PDMAEMA HNP assemblies are attractive in membrane separations, molecular valves, and biosensors, where having precise control over the pore size and pore gating is highly desirable.

Formation of Hydrophobic-Hydrophilic Associates in the N-Vinylpyrrolidone and Vinyl Propyl Ether Copolymer Aqueous Solutions

Utilizing turbidimetry data, an examination is conducted on the behavior of solutions containing N-vinylpyrrolidone and vinyl propyl ether copolymer within a temperature range coinciding with the occurrence of a phase transition. The investigation reveals that within specific conditions prevailing in this domain, the emergence of entities denoted as hydrophobic-hydrophilic associates is conceivable. These entities are characterized by the presence of a relatively dense core, upheld by hydrophobic interplays, and they are proficient in effectively dispersing irradiation within the optical spectrum. Encircling this core is a hydrophilic periphery that impedes the formation of insoluble precipitates. The development of such associates transpires when hydrophobic interactions have attained a discernible prominence, although they remain inadequate to counteract the forces that drive the expansion of macromolecular coils. Under these circumstances, the energetically favored course of action entails the constitution of a core for the aforementioned associates, involving discrete segments from diverse macromolecules. Notably, the introduction of an additional constituent (ethanol) to the solution, which selectively mitigates hydrophobic interactions, serves to stabilize the hydrophobic-hydrophilic associations.

4-Dimensional printing: exploring current and future capabilities in biomedical and healthcare systems-a Concise review

4-Dimensional Printing (4DP) is the latest concept in the pharmacy and biomedical segment with enormous potential in dosage from personalization and medication designing, which adopts time as the fourth dimension, giving printed structures the flexibility to modify their morphology. It can be defined as the fabrication in morphology with the help of smart/intelligent materials like polymers that permit the final object to alter its properties, shape, or function in response to external stimuli such as heat, light, pH, and moisture. The applications of 4DP in biomedicines and healthcare are explored with a focus on tissue engineering, artificial organs, drug delivery, pharmaceutical and biomedical field, etc. In the medical treatments and pharmaceutical field 4DP is paving the way with unlimited potential applications; however, its mainstream use in healthcare and medical treatments is highly dependent on future developments and thorough research findings. Therefore, previous innovations with smart materials are likely to act as precursors of 4DP in many industries. This review highlights the most recent applications of 4DP technology and smart materials in biomedical and healthcare fields which can show a better perspective of 4DP applications in the future. However, in view of the existing limitations, major challenges of this technology must be addressed along with some suggestions for future research. We believe that the application of proper regulatory constraints with 4DP technology would pave the way for the next technological revolution in the biomedical and healthcare sectors.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Phenotypically complex living materials containing engineered cyanobacteria

The field of engineered living materials lies at the intersection of materials science and synthetic biology with the aim of developing materials that can sense and respond to the environment. In this study, we use 3D printing to fabricate a cyanobacterial biocomposite material capable of producing multiple functional outputs in response to an external chemical stimulus and demonstrate the advantages of utilizing additive manufacturing techniques in controlling the shape of the fabricated photosynthetic material. As an initial proof-of-concept, a synthetic riboswitch is used to regulate the expression of a yellow fluorescent protein reporter in Synechococcus elongatus PCC 7942 within a hydrogel matrix. Subsequently, a strain of S. elongatus is engineered to produce an oxidative laccase enzyme; when printed within a hydrogel matrix the responsive biomaterial can decolorize a common textile dye pollutant, indigo carmine, potentially serving as a tool in environmental bioremediation. Finally, cells are engineered for inducible cell death to eliminate their presence once their activity is no longer required, which is an important function for biocontainment and minimizing environmental impact. By integrating genetically engineered stimuli-responsive cyanobacteria in volumetric 3D-printed designs, we demonstrate programmable photosynthetic biocomposite materials capable of producing functional outputs including, but not limited to, bioremediation.

Enthalpy and entropy synergistic regulation-based programmable DNA motifs for biosensing and information encryption

Deoxyribonucleic acid (DNA) provides a collection of intelligent tools for the development of information cryptography and biosensors. However, most conventional DNA regulation strategies rely solely on enthalpy regulation, which suffers from unpredictable stimuli-responsive performance and unsatisfactory accuracy due to relatively large energy fluctuations. Here, we report an enthalpy and entropy synergistic regulation-based pH-responsive A⁺/C DNA motif for programmable biosensing and information encryption. In the DNA motif, the variation in loop length alters entropic contribution, and the number of A⁺/C bases regulates enthalpy, which is verified through thermodynamic characterizations and analyses. On the basis of this straightforward strategy, the performances, such as pK_a, of the DNA motif can be precisely and predictably tuned. The DNA motifs are finally successfully applied for glucose biosensing and crypto-steganography systems, highlighting their potential in the field of biosensing and information encryption.

Dispersion Performances and Fluorescent Behaviors of Naphthalic Anhydride Doped in Poly(acrylic acid) Frameworks for pH-Sensitive Ibuprofen Delivery via Fractal Evolution

The pH-responsive fluorescent P(1,8-naphthalic anhydride (NA)-acrylic acid (AA)) matrix was successfully prepared by a doping method using poly(acrylic acid) (PAA) as a pH-sensitive polymer and NA as a fluorescent tracer. The fluorescent behaviors of the used NA dispersed in PAA frameworks were demonstrated based on fractal features combined with various characterizations, such as small-angle X-ray scattering (SAXS) patterns, photoluminescence (PL) spectra, scanning electron microscope (SEM) images, thermogravimetry (TG) profiles, Fourier transform infrared (FT-IR) spectroscopy, and time-resolved decays. The effects of NA-doping on the representative fluorescent P(NA-AA) were investigated, in which the fluorescent performance of the doped NA was emphasized. The results indicated that aggregated clusters of the doped NA were gradually serious with an increase in NA doping amount or extension of NA doping time, accompanied by an increase in mass fractal dimension (D_m) values. Meanwhile, the doped NA presented stable fluorescent properties during the swelling-shrinking process of PAA. Ibuprofen (IBU) was used as a model drug, and fractal evolutions of the obtained P(NA-AA) along with the drug loading and releasing behaviors were evaluated via SAXS patterns, in which the drug-loaded P(NA-AA) presented surface fractal (D_s) characteristics, while the D_m value varied from 2.94 to 2.58 during sustained drug-release in pH 2.0, indicating occurrences of its structural transformation from dense to loose with extension of IBU-releasing time. Finally, the cytotoxicity and cellular uptake behaviors of the obtained P(NA-AA) were preliminarily explored. These demonstrations revealed that the resultant P(NA-AA) should be a potential intelligent-responsive drug carrier for targeted delivery.

3D Printable Drug Delivery Systems: Next-generation Healthcare Technology and Regulatory Aspects

A revolutionary shift in healthcare has been sparked by the development of 3D printing, propelling us into an era replete with boundless opportunities for personalized DDS (Drug Delivery Systems). Precise control of the kinetics of drug release can be achieved through 3D printing, improving treatment efficacy and patient compliance. Additionally, 3D printing facilitates the co-administration of multiple drugs, simplifying treatment regimens. The technology offers rapid prototyping and manufacturing capabilities, reducing development timelines and costs. The seamless integration of advanced algorithms and artificial neural networks (ANN) augments the precision and efficacy of 3D printing, propelling us toward the forefront of personalized medicine. This comprehensive review delves into the regulatory frontiers governing 3D printable drug delivery systems, with an emphasis on adhering to rigorous safety protocols to ensure the well-being of patients by leveraging the latest advancements in 3D printing technologies powered by artificial intelligence. The paradigm promises superior therapeutic outcomes and optimized medication experiences and sets the stage for an immersive future within the Metaverse, wherein healthcare seamlessly converges with virtual environments to unlock unparalleled possibilities for personalized treatments.

A review on the recent progress, opportunities, and challenges of 4D printing and bioprinting in regenerative medicine

Four-dimensional (4 D) printing is a novel emerging technology, which can be defined as the ability of 3 D printed materials to change their form and functions. The term 'time' is added to 3 D printing as the fourth dimension, in which materials can respond to a stimulus after finishing the manufacturing process. 4 D printing provides more versatility in terms of size, shape, and structure after printing the construct. Complex material programmability, multi-material printing, and precise structure design are the essential requirements of 4 D printing systems. The utilization of stimuli-responsive polymers has increasingly taken the place of cell traction force-dependent methods and manual folding, offering a more advanced technique to affect a construct's adjusted shape transformation. The present review highlights the concept of 4 D printing and the responsive bioinks used in 4 D printing, such as water-responsive, pH-responsive, thermo-responsive, and light-responsive materials used in tissue regeneration. Cell traction force methods are described as well. Finally, this paper aims to introduce the limitations and future trends of 4 D printing in biomedical applications based on selected key references from the last decade.

The clinical significance of 4D printing

4D printing is the next step on from 3D printing involving the fourth dimension of 'time'. The programmed 4D-printed objects are capable of changing their shape in response to external stimuli, such as light, heat, or water, differentiating them from 3D-printed static objects. This technique promises new possibilities for cancer treatment, drug delivery, stent development, and tissue engineering. In this review, we focus on the development of 4D-printed objects, their clinical use, and the possibility of 5D printing, which could revolutionize the fields of biomedical engineering and drug delivery.

Adjustable Thermo-Responsive, Cell-Adhesive Tissue Engineering Scaffolds for Cell Stimulation through Periodic Changes in Culture Temperature

A three-dimensional (3D) scaffold ideally provides hierarchical complexity and imitates the chemistry and mechanical properties of the natural cell environment. Here, we report on a stimuli-responsive photo-cross-linkable resin formulation for the fabrication of scaffolds by continuous digital light processing (cDLP), which allows for the mechano-stimulation of adherent cells. The resin comprises a network-forming trifunctional acrylate ester monomer (trimethylolpropane triacrylate, or TMPTA), N-isopropyl acrylamide (NiPAAm), cationic dimethylaminoethyl acrylate (DMAEA) for enhanced cell interaction, and 4-acryloyl morpholine (AMO) to adjust the phase transition temperature (T_trans) of the equilibrium swollen cross-polymerized scaffold. With glycofurol as a biocompatible solvent, controlled three-dimensional structures were fabricated and the transition temperatures were adjusted by resin composition. The effects of the thermally induced mechano-stimulation were investigated with mouse fibroblasts (L929) and myoblasts (C2C12) on printed constructs. Periodic changes in the culture temperature stimulated the myoblast proliferation.

Opportunities and Challenges of Switchable Materials for Pharmaceutical Use

Switchable polymeric materials, which can respond to triggering signals through changes in their properties, have become a major research focus for parenteral controlled delivery systems. They may enable externally induced drug release or delivery that is adaptive to in vivo stimuli. Despite the promise of new functionalities using switchable materials, several of these concepts may need to face challenges associated with clinical use. Accordingly, this review provides an overview of various types of switchable polymers responsive to different types of stimuli and addresses opportunities and challenges that may arise from their application in biomedicine.

dl-Serine Covalently Ornamented and Ln3+-Incorporated Arsenotungstates with Fast-Responsive Photochromic and Photoinduced Luminescent Switchable Behaviors

Three isostructural dl-serine covalently functionalized and multinuclear lanthanide (Ln³⁺)-embedded arsenotungstates, K₂[{As₄W₄₄O₁₃₇(OH)₁₈(H₂O)₂(dl-Ser)₂}{Ln₂(H₂O)₄(dl-Ser)}₂{Ln(H₂O)₇}₂]·70H₂O (Ln = Sm (1), Eu (2), and Gd (3); dl-Ser = C₃H₇NO₃), were prepared, where the centrosymmetric [{As₄W₄₄O₁₃₇(OH)₁₈(H₂O)₂(dl-Ser)₂}{Ln₂(H₂O)₄(dl-Ser)}₂]^8- polyanion consists of two {As₂W₁₉O₅₉(OH)₈(H₂O)}^6- fragments, integrated with a two-dl-serine-ornamented [W₆O₂₃(OH)₂(dl-Ser)₂{Ln₂(H₂O)₄}₂]^8- segment. In addition, the photochromic transformation of solid-state compounds 1-3 was observed from colorless to blue after a UV illumination of 4 min, and the decay process lasted as long as ∼20 h in the dark. The coloration kinetic half-life (t_1/2) values of compounds 1, 2, and 3 were calculated to be 0.597, 0.920, and 0.723 min, respectively. Furthermore, the luminescent properties and energy migration from arsenotungstates and organic chromophores to Sm³⁺ and Eu³⁺ ions in 1 and 2 have been intensively investigated. Further analysis manifests that 1 possesses an effective luminescent switchable behavior, triggered by its fast-responsive photochromism effect.

Toward a Multifunctional Light-Driven Biomimetic Mudskipper-Like Robot for Various Application Scenarios

The systematicness, flexibility, and complexity of natural biological organisms are a constant stream of inspiration for researchers. Therefore, mimicking the natural intelligence system to develop microrobotics has attracted broad interests. However, developing a multifunctional device for various application scenarios has great challenges. Herein, we present a bionic multifunctional actuation device─a light-driven mudskipper-like actuator that is composed of a porous silicone elastomer and graphene oxide. The actuator exhibits a reversible and well-integrated response to near-infrared (NIR) light due to the photothermal-induced contractile stress in the actuation film, which promotes generation of cyclical and rapid locomotion upon NIR light being switched on and off, such as bending in air and crawling in liquid. Furthermore, through rational device design and modulation of light, the mechanically versatile device can float and swim controllably following a predesigned route at the liquid/air interface. More interestingly, the actuator can jump from liquid medium to air with an extremely short response time (400 ms), a maximum speed of 2 m s^-1, and a height of 14.3 cm under the stimulation of near-infrared light. The present work possesses great potential in the applications of bioinspired actuators in various fields, such as microrobots, sensors, and locomotion.

Polymersomes: Soft Nanoparticles from Miktoarm Stars for Applications in Drug Delivery

Self-assembly of amphiphilic macromolecules has provided an advantageous platform to address significant issues in a variety of areas, including biology. Such soft nanoparticles with a hydrophobic core and hydrophilic corona, referred to as micelles, have been extensively investigated for delivering lipophilic therapeutics by physical encapsulation. Polymeric vesicles or polymersomes with similarities in morphology to liposomes continue to play an essential role in understanding the behavior of cell membranes and, in addition, have offered opportunities in designing smart nanoformulations. With the evolution in synthetic methodologies to macromolecular precursors, the construction of such assemblies can now be modulated to tailor their properties to match desired needs. This review brings into focus the current state-of-the-art in the design of polymersomes using amphiphilic miktoarm star polymers through a detailed analysis of the synthesis of miktoarm star polymers with tuned lengths of varied polymeric arms, their self-assembly, and applications in drug delivery.

Local Electronic Charge Transfer in the Helical Induction of Cis-Transoid Poly(4-carboxyphenyl)acetylene by Chiral Amines

Understanding the phenomena that lead to the formation of a specific helicity in helical polymers remains a challenge even today. Various polymers have been shown to assume different helical screw-senses depending on different stimuli. Acid-base chiral amines, for example, can induce helical conformations on cis-transoid poly(4-carboxyphenyl)acetylene yielding high-intensity circular dichroism signals. There have been many experimental attempts to elucidate the driving forces involved, but the induction process remains unclear. Here, we investigate the mechanism of helical polymer formation by both Molecular Dynamics (MD) and Density Functional Theory (DFT) approaches. We find that DFT calculations and the dissociation energies between 4 monomer polymers and amines show a clear trend in the affinity of R and S conformers with clockwise and counterclockwise polymer screw-senses, respectively. The charge analysis revealed that the local charge transfer effect plays a crucial role that leads to the helical polymer-amine induction.

Ophthalmic Delivery of Riboflavin Loaded Nanoparticulate Suspension in Keratoconus: A Preclinical Study in Rabbit Model

The present investigation undertakes the formulation of nanoparticulate suspension of Riboflavin to treat keratoconus disease by applying it to the infected mice corneas. The nanoparticles of Riboflavin were prepared using single solvent evaporation method and later formulated as suspension using continuous probe sonication method. Then, both riboflavin nanoparticles and suspension were evaluated for various parameters. The nanoparticles showed smooth and spherical surface with in vitro drug release up to 77.89%. The drug content was found to be 97.23%-98.89%. The suspension was found to be visually clear with pH ranging from 6 to 7. The drug entrapment was found to be from 76.37% to 97.34%. Since there was no hemolytic activity, this formulation was suitable for ophthalmic administration. The Draize test confirmed the non-irritant, non-itchy nature of formulation. The prepared formulations, such as nanoparticulate gel and suspension, were found to be significantly efficacious in experimental animals.

Stimulus-Responsive Polymers Based on Polypeptoid Skeletons

Polypeptoids have attracted a lot of atteSDntion because of their unique structural characteristics and special properties. Polypeptoids have the same main chain structures to polypeptides, making them have low cytotoxicity and excellent biocompatibility. Polypeptoids can also respond to external environmental changes by modifying the configurations of the side chains. The external stimuli can be heat, pH, ions, ultraviolet/visible light and active oxygen or their combinations. This review paper discussed the recent research progress in the field of stimulus-responsive polypeptoids, including the design of new stimulus-responsive polypeptoid structures, controlled actuation factors in response to external stimuli and the application of responsive polypeptoid biomaterials in various biomedical and biological nanotechnology, such as drug delivery, tissue engineering and biosensing.

Photo cleavable thioacetal block copolymers for controlled release

We present a new light cleavable polymer containing o-nitrobenzene thioacetal groups in the main chain. By conjugation to a PEG block, we synthesized block copolymers capable of forming nanoparticles in aqueous solution. We studied drug encapsulation and release using the model drug Nile Red. Irradiation with UV-A light (365 nm) leads to efficient degradation of the polymers and associated burst release of the payload. Unlike other thioacetal and thioketal polymers, these polymers are stable to reactive oxygen species (ROS), preventing non-triggered release. Moreover, the nanocarriers showed low cytotoxicity in cell viability experiments.

The o-nitrobenzene thioacetal group selectively cleaves upon UV-A irradiation. When incorporated in a block-copolymer, these photoactive groups can be used for controlled release of molecular cargo from polymer nanoparticles.

Nanostructured Surface Finishing and Coatings: Functional Properties and Applications

This review presents current literature on different nanocomposite coatings and surface finishing for textiles, and in particular this study has focused on smart materials, drug-delivery systems, industrial, antifouling and nano/ultrafiltration membrane coatings. Each of these nanostructured coatings shows interesting properties for different fields of application. In this review, particular attention is paid to the synthesis and the consequent physico-chemical characteristics of each coating and, therefore, to the different parameters that influence the substrate deposition process. Several techniques used in the characterization of these surface finishing coatings were also described. In this review the sol-gel method for preparing stimuli-responsive coatings as smart sensor materials is described; polymers and nanoparticles sensitive to pH, temperature, phase, light and biomolecules are also treated; nanomaterials based on phosphorus, borates, hydroxy carbonates and silicones are used and described as flame-retardant coatings; organic/inorganic hybrid sol-gel coatings for industrial applications are illustrated; carbon nanotubes, metallic oxides and polymers are employed for nano/ultrafiltration membranes and antifouling coatings. Research institutes and industries have collaborated in the advancement of nanotechnology by optimizing conversion processes of conventional materials into coatings with new functionalities for intelligent applications.

Electrically Conductive and 3D-Printable Oxidized Alginate-Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering

Electroactive hydrogels can be used to influence cell response and maturation by electrical stimulation. However, hydrogel formulations which are 3D printable, electroactive, cytocompatible, and allow cell adhesion, remain a challenge in the design of such stimuli-responsive biomaterials for tissue engineering. Here, a combination of pyrrole with a high gelatin-content oxidized alginate-gelatin (ADA-GEL) hydrogel is reported, offering 3D-printability of hydrogel precursors to prepare cytocompatible and electrically conductive hydrogel scaffolds. By oxidation of pyrrole, electroactive polypyrrole:polystyrenesulfonate (PPy:PSS) is synthesized inside the ADA-GEL matrix. The hydrogels are assessed regarding their electrical/mechanical properties, 3D-printability, and cytocompatibility. It is possible to prepare open-porous scaffolds via bioplotting which are electrically conductive and have a higher cell seeding efficiency in scaffold depth in comparison to flat 2D hydrogels, which is confirmed via multiphoton fluorescence microscopy. The formation of an interpenetrating polypyrrole matrix in the hydrogel matrix increases the conductivity and stiffness of the hydrogels, maintaining the capacity of the gels to promote cell adhesion and proliferation. The results demonstrate that a 3D-printable ADA-GEL can be rendered conductive (ADA-GEL-PPy:PSS), and that such hydrogel formulations have promise for cell therapies, in vitro cell culture, and electrical-stimulation assisted tissue engineering.

Hydrogels as potential drug-delivery systems: network design and applications

Hydrogels are 3D crosslinked polymer matrices having a colossal tendency to imbibe water and exhibit swelling under physiological conditions without deformation in their hydrophilic network. Hydrogels being biodegradable and biocompatible, gained consideration due to some unique characteristics: responsiveness to external stimuli (pH, temperature) and swelling in aqueous solutions. Hydrogels offer a promising option for various pharmaceutical and biomedical applications, including tissue-specific drug delivery at a predetermined, controlled rate. This article presents a brief review of the recent and fundamental advances to design hydrogels, the swelling and deswelling mechanism, various crosslinking methods and their use as an intelligent carrier in the pharmaceutical field. Recent applications of hydrogels are also briefly discussed and exemplified.

Artificial Bioaugmentation of Biomacromolecules and Living Organisms for Biomedical Applications

The synergistic union of nanomaterials with biomaterials has revolutionized synthetic chemistry, enabling the creation of nanomaterial-based biohybrids with distinct properties for biomedical applications. This class of materials has drawn significant scientific interest from the perspective of functional extension via controllable coupling of synthetic and biomaterial components, resulting in enhancement of the chemical, physical, and biological properties of the obtained biohybrids. In this review, we highlight the forefront materials for the combination with biomacromolecules and living organisms and their advantageous properties as well as recent advances in the rational design and synthesis of artificial biohybrids. We further illustrate the incredible diversity of biomedical applications stemming from artificially bioaugmented characteristics of the nanomaterial-based biohybrids. Eventually, we aim to inspire scientists with the application horizons of the exciting field of synthetic augmented biohybrids.

Phase transition characterization of poly(oligo(ethylene glycol)methyl ether methacrylate) brushes using the quartz crystal microbalance with dissipation

Heterogeneous non-linear poly(ethylene glycol) analogs, like poly(oligo(ethylene glycol)methyl ether methacrylate) (POEGMA), are of particular interest in the fabrication of smart biocompatible coatings as they undergo a reversible macromolecular rearrangement in response to external heat stimuli. The phase transition dynamics of POEGMA coatings in response to external temperature stimuli have been poorly investigated. The quartz crystal microbalance with dissipation (QCM-D) can be used to investigate the phase transition of these functional coatings as polymer brushes in a dynamic and noninvasive in situ measurement. POEGMA brushes with different thickness are synthesized from the surface of a QCM-D sensor following a living radical polymerization technique by varying the monomer molecular weight. Investigations on the thermoresponsive collapse and swelling of POEGMA brushes grafted from the surface of a QCM-D sensor reveal the reversible phase transition nature of these coatings. Furthermore, the potential of these smart coatings in the field of biotechnology was explored by investigating the absorption and desorption of a model drug. A pulsatile drug release profile triggered by an increase in temperature is observed from POEGMA brushes. POEGMA brushes have the potential to be utilized as polymer coatings for controlled and programable drug release.

Recent progress in nanoformulations of cabazitaxel

The antitumor efficacy of various paclitaxel (PTX) and docetaxel (DTX) formulations in clinical applications is seriously affected by drug resistance. Cabazitaxel, a second-generation taxane, exhibits greater anticancer activity than paclitaxel and docetaxel and has low affinity for the P-glycoprotein (P-gp) efflux pump because of its structure. Therefore, cabazitaxel has the potential to overcome taxane resistance. However, owing to the high systemic toxicity and hydrophobicity of cabazitaxel and the instability of its commercial preparation, Jevtana®, the clinical use of cabazitaxel is restricted to patients with metastatic castration-resistant prostate cancer (mCRPC) who show progression after docetaxel-based chemotherapy. Nanomedicine is expected to overcome the limitations associated with cabazitaxel application and surmount taxane resistance. This review outlines the drug delivery systems of cabazitaxel published in recent years, summarizes the challenges faced in the development of cabazitaxel nanoformulations, and proposes strategies to overcome these challenges.

Towards synergistic oscillations in enzymatically active hydrogel spheres

Stimuli-responsive polymers are capable of reacting to an external trigger. We report self-regulated, enzymatically active, and pH-responsive hydrogels that show dynamic behavior without an external trigger. This is enabled by a feedback loop between the enzymatic conversion of glucose into gluconic acid and the pH-induced volume phase transition that leads to a modulation in glucose permeability. The synthesized hydrogel spheres combine all required properties for sustained oscillation including enzymatic activity, switchable reactivity, hysteresis in volume phase transition and feedback between the reaction and permeation. A simple model of the system identified possible operating points where sustained oscillations are possible. Experiments at these operating points revealed that the system is able to perform a self-regulated oscillation cycle under a constant nutrient supply. A sensitivity analysis showed that the system is especially sensitive around the point of oscillation, so that precise control of the process parameters is essential to achieve sustained oscillations.

Role of Ionic Moieties in Hydrogel Networks to Remove Heavy Metal Ions from Water

A variety of methods for removing heavy metal ions from wastewater have been developed but because of their low efficiency, further production of toxic sludge or other waste materials, high expense, and lengthy procedures, limited progress has been achieved to date. Polymeric hydrogel has been attracting particular attention for the effective removal of heavy metal ions from wastewater. Here, ionogenic polymeric hydrogels were prepared by free-radical copolymerization of a neutral acrylamide (AAm) monomer with an ionic comonomer in the presence of a suitable initiator and a cross-linker. Different types of ionic comonomers such as strongly acidic: 2-acrylamido-2-methylpropane sulfonic acid, weakly acidic: acrylic acid (AAc), and zwitterionic: 2-methacryloyloxy ethyl dimethyl-3-sulfopropyl ammonium hydroxide with varying amounts were incorporated into the poly(AAm) networks to fabricate the hydrogels. The heavy metal ions (Fe3+, Cr3+, and Hg2+) removal capacity of the fabricated hydrogels from an aqueous solution via electrostatic interactions, coordination bond formation, and a diffusion process was compared and contrasted. The poly(AAm) hydrogel containing weakly acidic AAc groups shows excellent removal capacity of heavy metal ions. The release and recovery of heavy metal ions from the hydrogel samples are also impressive. The compressive strength of hydrogels was found to be significantly high after incorporating heavy metal ions that will increase their potential applications in different sectors.

Light Scattering and Rheological Studies of 3D/4D Printable Shape Memory Gels Based on Poly (N,N-Dimethylacrylamide-co-Stearyl Acrylate and/or Lauryl Acrylates)

In this work, we present the structural analysis of 3D/4D printable N,N-dimethylacrylamide (DMAAm)-co-stearyl acrylate (SA) and/or lauryl acrylate (LA)-based shape memory gels (SMGs). We characterized these gels by scanning microscopic light scattering technique (SMILS) where a time- and space-averaged correlation function is obtained to overcome the inhomogeneous media. Thus, the characteristic size of the gel internal network (mesh size, ξ) and crosslinking densities are estimated from the Einstein-Stokes formula. The rheological study of the SMGs revealed information about their mechanical strength and transition temperature. From the experimental storage modulus measured by rheological study, crosslinking density and mesh size of the network were also calculated. Both the techniques suggest that SMG with high crystalline content of SA monomer in the gel network contain smaller mesh size (1.13 nm for SMILS and 9.5 nm for rheology study) and high crosslinking density. The comparative study between the light scattering technique and rheological analysis through the quantitative analysis of crosslinking densities will be important to understand the structural properties of the SMGs.

Novel Drug Delivery Systems Fighting Glaucoma: Formulation Obstacles and Solutions

Glaucoma is considered to be one of the biggest health problems in the world. It is the main cause of preventable blindness due to its asymptomatic nature in the early stages on the one hand and patients' non-adherence on the other. There are several approaches in glaucoma treatment, whereby this has to be individually designed for each patient. The first-line treatment is medication therapy. However, taking into account numerous disadvantages of conventional ophthalmic dosage forms, intensive work has been carried out on the development of novel drug delivery systems for glaucoma. This review aims to provide an overview of formulation solutions and strategies in the development of in situ gel systems, nanosystems, ocular inserts, contact lenses, collagen corneal shields, ocular implants, microneedles, and iontophoretic devices. The results of studies confirming the effectiveness of the aforementioned drug delivery systems were also briefly presented.

An Intelligent AIEgen with Nonmonotonic Multiresponses to Multistimuli

Intelligent stimulus-response (S/R) systems are the basis of natural process and machine control, which are intensively explored in biomimetic design and analytical/biological applications. However, nonmonotonic multi-S/R systems are still rarely studied so far. In this work, a rational design strategy is proposed to achieve such a unique S/R system by integrating opposite luminescence behaviors in one molecule. When solvent polarity increases, many heterocyclic or carbonyl-containing compounds often become more emissive due to the suppression of the proximity effect, whereas molecules with donor-acceptor (D-A) structures tend to be less emissive because of the twisted intramolecular charge transfer. Meanwhile, protonation on D/A moieties will weaken/strengthen the D-A interaction to result in blue/redshifted emissions. By combining a protonatable heterocyclic acceptor and a protonatable donor together in one molecule, nonmonotonic brightness responses to polarity stimuli and nonmonotonic color responses to pH stimuli can be achieved. The design strategy is successfully verified by a simple molecule named 4-(dimethylamino)styryl)quinoxalin-2(1H)-one (ASQ). ASQ exhibits nonmonotonic responses to polarity and pH stimuli, and aggregation-induced emission (AIE) with a nonmonotonic AIE curve. Meanwhile, ASQ can be adjusted to emit white light in an acidic environment, and it shows multivalent functionalities including albumin protein sensing, ratiometric pH sensing, and amine gas sensing.

pH-Responsive Polyketone/5,10,15,20-Tetrakis-(Sulfonatophenyl)Porphyrin Supramolecular Submicron Colloidal Structures

In this work, we prepared color-changing colloids by using the electrostatic self-assembly approach. The supramolecular structures are composed of a pH-responsive polymeric surfactant and the water-soluble porphyrin 5,10,15,20-tetrakis-(sulfonatophenyl)porphyrin (TPPS). The pH-responsive surfactant polymer was achieved by the chemical modification of an alternating aliphatic polyketone (PK) via the Paal–Knorr reaction with N-(2-hydroxyethyl)ethylenediamine (HEDA). The resulting polymer/dye supramolecular systems form colloids at the submicron level displaying negative zeta potential at neutral and basic pH, and, at acidic pH, flocculation is observed. Remarkably, the colloids showed a gradual color change from green to pinky-red due to the protonation/deprotonation process of TPPS from pH 2 to pH 12, revealing different aggregation behavior.

Controlling orientation, conformation, and biorecognition of proteins on silane monolayers, conjugate polymers, and thermo-responsive polymer brushes: investigations using TOF-SIMS and principal component analysis

Control over orientation and conformation of surface-immobilized proteins, determining their biological activity, plays a critical role in biointerface engineering. Specific protein state can be achieved with adjusted surface preparation and immobilization conditions through different types of protein-surface and protein-protein interactions, as outlined in this work. Time-of-flight secondary ion mass spectroscopy, combining surface sensitivity with excellent chemical specificity enhanced by multivariate data analysis, is the most suited surface analysis method to provide information about protein state. This work highlights recent applications of the multivariate principal component analysis of TOF-SIMS spectra to trace orientation and conformation changes of various proteins (antibody, bovine serum albumin, and streptavidin) immobilized by adsorption, specific binding, and covalent attachment on different surfaces, including self-assembled monolayers on silicon, solution-deposited polythiophenes, and thermo-responsive polymer brushes. Multivariate TOF-SIMS results correlate well with AFM data and binding assays for antibody-antigen and streptavidin-biotin recognition. Additionally, several novel extensions of the multivariate TOF-SIMS method are discussed.

Graphical abstract