Combining nonthermal technologies to control foodborne microorganisms

Breaking barriers: Elevating legume protein functionality in food products through non-thermal technologies

Legume proteins have recently gained significant interest in the food industry for their eco-friendliness and nutritional qualities. Research shows that the replacement of specific animal protein sources with legume proteins presents sustainability and economic benefit. Nonetheless, legume proteins frequently exhibit inferior functional properties and palatability compared to animal proteins. Various non-thermal technologies, including high hydrostatic pressure, ultrasound, cold plasma, pulsed electric field, and dynamic high-pressure microjet, had been investigated to enhance the functional properties of legume proteins without loss of nutritional and sensory properties. Although these technologies show potential, no systematic study has been conducted to summarize and compare their effects on different legume proteins. This review aims to fill this gap by addressing the most promising approaches of non-thermal technologies for the modification of functional properties of legume proteins. New insights are discussed, elaborating the effect of non-thermal technologies on the structural and functional behavior of proteins.

Adaptation and Validation of a Modified Broth Microdilution Method for Screening the Anti-Yeast Activity of Plant Phenolics in Apple and Orange Juice Models

Yeasts are the usual contaminants in fruit juices and other beverages, responsible for the decrease in the quality and shelf-life of such products. Preservatives are principally added to these beverages to enhance their shelf-life. With the increasing consumer concern towards chemical food additives, plant-derived antimicrobials have attracted the attention of researchers as efficient and safer anti-yeast agents. However, the methods currently used for determining their anti-yeast activity are time- and material-consuming. In this study, the anti-yeast effect of plant phenolic compounds in apple and orange juice food models using microtiter plates has been evaluated in order to validate the modified broth microdilution method for screening the antimicrobial activity of juice preservative agents. Among the twelve compounds tested, four showed a significant in vitro growth-inhibitory effect against all tested yeasts (Saccharomyces cerevisiae, Zygosaccharomyces bailii, and Zygosaccharomyces rouxii) in both orange and apple juices. The best results were obtained for pterostilbene in both juices with minimum inhibitory concentrations (MICs) ranging from 32 to 128 μg/mL. Other compounds, namely oxyresveratrol, piceatannol, and ferulic acid, exhibited moderate inhibitory effects with MICs of 256-512 μg/mL. Furthermore, the results indicated that differences in the chemical structures of the compounds tested significantly affected the level of yeast inhibition, whereas stilbenes with methoxy and hydroxy groups produced the strongest effect. Furthermore, the innovative assay developed in this study can be used for screening the anti-yeast activity of juice preservative agents because it saves preparatory and analysis time, laboratory supplies, and manpower in comparison to the methods commonly used.

Creating a novel genetic diversity of Trichoderma afroharzianum by γ-radiation for xylanase-cellulase production

Creating novel sources of a microbial strain using induced mutation can increase enzyme production for industrial use. According to this, we have developed a mutant strain of Trichoderma afroharzianum by Co60 gamma irradiation. Trichoderma mutants were isolated from an optimum dose of 250 Gy. The qualitative and quantitative screening were used for evaluating their enzyme production and the DNA barcoding method was used to identify the best Trichoderma mutant isolates. The highest cellulase (exo-glucanase, endoglucanase, β-glucosidase, and total cellulase) and xylanase activities were observed in superior mutant isolates of Trichoderma afroharzianum NAS107-M44 and Trichoderma afroharzianum NAS107-M82, which is approximately 1.6-2.5 times higher than its parent strain, respectively. The electrophoretic pattern of proteins showed that the exo-glucanase I, endo-glucanase III, and the xylanase I enzymes hydrolyzed the corn bran, synergistically. Overall, gamma irradiation-induced mutation could be an expedient technique to access such superior mutants for the bioconversion of corn bran wastes.

Sonication and thermal treatment of pineapple juice: Comparative assessment of the physicochemical properties, antioxidant activities and microbial inactivation

Sonication is a novel processing method that is perceived as a substitute for heat treatment to ensure the safety of juice while reducing the loss of nutrients during processing. The impacts of sonication and thermal processing on pineapple juice, including physicochemical properties, antioxidant activities, and microbial inactivation, were studied. Pineapple juice was sonicated at 100 W and 140 W (for 5, 10 and 15 min) and heat-treated at 70 °C, 80 °C and 90 °C (for 1 min). Results indicated minor alterations in physicochemical characteristics after sonication and thermal processing, while sonication treatment showed better retention of the color, clarity, and browning index of pineapple juice. Moreover, sonication significantly increased the bioactive compounds (total carotenoids, ascorbic acid, phenolics, and flavonoids) and boosted the antioxidant activity of pineapple juice compared to the heat-processed juice. Although sonication reduced the microbial load significantly with the increasing exposure time, it could not thoroughly inactivate microorganisms like thermal treatment. Therefore, optimal sonication processing conditions are required to be determined. This study will help the food processors utilize sonication treatment in pineapple juice processing plants to inactivate microorganisms thoroughly while also boosting the nutritional value.

Evaluation of the additive effects of volatile fatty acids and moderate heat treatment for enhancing the inactivation of vegetative cells and spores of Clostridium perfringens by flow cytometry

OBJECTIVES

Clostridium perfringens is a well-known spore-forming bacterium that can resist the environment. A mixture of volatile fatty acids or thermal treatments can interact with these bacteria. The aim of this study was to evaluate the effects of different volatile fatty acid concentrations and moderate heat treatment on Clostridium perfringens sporulation.

METHODS

A pure culture of Clostridium perfringens type A in Duncan Strong medium was treated with a mixture of volatile fatty acids at several concentrations. A thermal treatment was also tested. To evaluate the effects, a double staining method was employed, and treatments on Clostridium perfringens were analysed by flow cytometry.

RESULTS

Moderate heat treatment destroyed vegetative forms but had no effect on sporulating forms. Volatile fatty acids combined with moderate heat treatment inhibited Clostridium perfringens sporulation.

CONCLUSIONS

The use of flow cytometry as an original method for evaluating the treatment of Clostridium perfringens is of interest because of its simplicity, short time to obtain results, and the level of information provided on the microbial population (impact on metabolism). A combination of mild treatments (moderate heat treatment + volatile fatty acids) to decrease the Clostridium perfringens concentration when these bacteria sporulate is a very promising finding for inhibiting Clostridium perfringens propagation.

A Review of Plant-Based Drinks Addressing Nutrients, Flavor, and Processing Technologies

Plant-based drinks have garnered significant attention as viable substitutes for traditional dairy milk, providing options for individuals who are lactose intolerant or allergic to dairy proteins, and those who adhere to vegan or vegetarian diets. In recent years, demand for plant-based drinks has expanded rapidly. Each variety has unique characteristics in terms of flavor, texture, and nutritional composition, offering consumers a diverse range of choices tailored to meet individual preferences and dietary needs. In this review, we aimed to provide a comprehensive overview of the various types of plant-based drinks and explore potential considerations including their nutritional compositions, health benefits, and processing technologies, as well as the challenges facing the plant-based drink processing industry. We delve into scientific evidence supporting the consumption of plant-based drinks, discuss their potential roles in meeting dietary requirements, and address current limitations and concerns regarding their use. We hope to illuminate the growing significance of plant-based drinks as sustainable and nutritious alternatives to dairy milk, and assist individuals in making informed choices regarding their dietary habits, expanding potential applications for plant-based drinks, and providing necessary theoretical and technical support for the development of a plant-based drink processing industry.

Mechanistic and synergistic aspects of ultrasonics and hydrodynamic cavitation for food processing

Compared with traditional methods, cavitation-based processing technology has received extensive attention for its low energy consumption and high processing efficiency. The cavitation phenomenon releases high energy due to the generation and collapse of bubbles, which improves the efficiency of various food processing. This review details the cavitation mechanism of ultrasonic cavitation (UC) and hydrodynamic cavitation (HC), factors affecting cavitation, the application of cavitation technology in food processing, and the application of cavitation technology in the extraction of various natural ingredients. The safety and nutrition of food processed by cavitation technology and future research directions are also discussed. The mechanism of UC refers to longitudinal displacement of the particles of the medium induced by ultrasonic waves causing a series of alternating compression and rarefaction of particles, whereas HC occurs when liquid enters a narrow section and undergoes large pressure differentials, both of which can trigger the generation, growth, and collapse of microbubbles. Cavitation could be applied in microbial inactivation, and drying and freezing processing. In addition, cavitation bubbles can have mechanical and thermal effects on plant cells. In general, cavitation technology is a new sustainable, green, and innovative technology with broad application prospects and capabilities.

Evaluation of Physicochemical and Microbial Properties of Extracts from Wine Lees Waste of Matelica’s Verdicchio and Their Applications in Novel Cosmetic Products

Wine lees are sediments deposited on the walls and bottom of barrels resulting from wine fermentation and mainly consist of yeasts. Saccharomyces cerevisiae extracts, rich in beneficial components for the skin, have already been used in cosmesis, while wine lees have not been well exploited by the cosmetics industry yet. The aim of this work was the full characterization of the wine lees from Verdicchio’s wine, with the aim to exploit it as a beneficial ingredient in new cosmetic products. After mapping the microbial composition of the sample waste, the parameters for the sonication extraction process were optimized and the physicochemical properties of the extract were analyzed. The efficiency of the aqueous extraction—and in particular the yeast cell lysis necessary for the release of proteins from the cell—was assessed by evaluating cell shape and size, and protein release, under scanning electron microscopy (SEM), dynamic light scattering (DLS) and Bradford’s protein assays. Thus, the total phenol content and antioxidant capacity of the supernatant recovered from native and sonicated lees were determined by Folin–Ciocalteu’s and spectrophotometric assays, respectively. To quantify the heavy metals and highlight the presence of microelements beneficial for the skin, inductively coupled plasma-mass spectrometry (ICP-MS) was applied. In vitro metabolic activity and cytotoxicity were tested on both HaCat keratinocytes and human gingival fibroblasts, showing that wine lees are safe for skin’s cells. The results show that sonicated lees appear to be more interesting than native ones as a consequence of the release of the active ingredients from the cells. Due to the high antioxidant capacity, content of beneficial elements for skin and an appropriate microbiologic profile, wine lees were included in five new solid cosmetic products and tested for challenge test, compatibility with human skin, sensory analysis, trans epidermal water loss (TEWL) and sebometry.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10^-3 -4.0 × 10^-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

Combinatorial physical methods for cellular therapy: Towards the future of cellular analysis?

The physical energy activated techniques for cellular delivery and analysis is one of the most rapidly expanding research areas for a variety of biological and biomedical discoveries. These methods, such as electroporation, optoporation, sonoporation, mechanoporation, magnetoporation, etc., have been widely used in delivering different biomolecules into a range of primary and patient-derived cell types. However, the techniques when used individually have had limitations in delivery and co-delivery of diverse biomolecules in various cell types. In recent years, a number of studies have been performed by combining the different membrane disruption techniques, either sequentially or simultaneously, in a single study. The studies, referred to as combinatorial, or hybrid techniques, have demonstrated enhanced transfection, such as efficient macromolecular and gene delivery and co-delivery, at lower delivery parameters and with high cell viability. Such studies can open up new and exciting avenues for understanding the subcellular structure and consequently facilitate the development of novel therapeutic strategies. This review consequently aims at summarising the different developments in hybrid therapeutic techniques. The different methods discussed include mechano-electroporation, electro-sonoporation, magneto-mechanoporation, magnetic nanoparticles enhanced electroporation, and magnetic hyperthermia studies. We discuss the clinical status of the different methods and conclude with a discussion on the future prospects of the combinatorial techniques for cellular therapy and diagnostics.

Effective control of antibiotic resistance using a sonication-based combinational treatment and its application to fresh food

Antibiotics have been widely used to treat several infectious diseases. However, the overuse of antibiotics has promoted the emergence and spread of antibiotic resistant bacteria (ARB) in various fields, including the food industry. In this study, the antimicrobial efficacies of two conventional sterilization methods, mild heat, and sonication, were evaluated and optimized to develop a new strategy against ARB. Simultaneous mild heat and sonication (HS) treatment led to a significant reduction in viable cell counts, achieving a 5.58-log reduction in 4 min. However, no remarkable decrease in viable cell counts was observed in individually treated groups. Interestingly, the release of antibiotic resistance genes (ARGs) increased in a time-dependent manner in the heat-treated and HS-treated groups. The inactivation levels of ARGs increased as the HS treatment time increased from 2 to 8 min, and most ARGs were degraded after 8 min. In contrast, no significant inactivation of ARGs was observed in the heat-treated and sonication-treated groups after 8 min. These results reveal the synergistic effect of the combination treatment in controlling not only ARB but also ARGs. Finally, on applying this newly developed combination treatment to fresh food (cherry tomato and carrot juice), 3.97- and 4.28-log microbial inactivation was achieved, respectively. In addition, combination treatment did not affect food quality during storage for 5 days. Moreover, HS treatment effectively inactivated ARGs in fresh food systems.

"An apple a day keeps the doctor away": The potentials of apple bioactive constituents for chronic disease prevention

Apples are rich sources of selected micronutrients (e.g., iron, zinc, vitamins C and E) and polyphenols (e.g., procyanidins, phloridzin, 5′‐caffeoylquinic acid) that can help in mitigating micronutrient deficiencies (MNDs) and chronic diseases. This review provides an up‐to‐date overview of the significant bioactive compounds in apples together with their reported pharmacological actions against chronic diseases such as diabetes, cancer, and cardiovascular diseases. For consumers to fully gain these health benefits, it is important to ensure an all‐year‐round supply of highly nutritious and good‐quality apples. Therefore, after harvest, the physicochemical and nutritional quality attributes of apples are maintained by applying various postharvest treatments and hurdle techniques. The impact of these postharvest practices on the safety of apples during storage is also highlighted. This review emphasizes that advancements in postharvest management strategies that extend the storage life of apples should be optimized to better preserve the bioactive components crucial to daily dietary needs and this can help improve the overall health of consumers.

Lactic Acid Bacteria as Antimicrobial Agents: Food Safety and Microbial Food Spoilage Prevention

In the wake of continual foodborne disease outbreaks in recent years, it is critical to focus on strategies that protect public health and reduce the incidence of foodborne pathogens and spoilage microorganisms. Currently, there are limitations associated with conventional microbial control methods, such as the use of chemical preservatives and heat treatments. For example, such conventional treatments adversely impact the sensorial properties of food, resulting in undesirable organoleptic characteristics. Moreover, the growing consumer advocacy for safe and healthy food products, and the resultant paradigm shift toward clean labels, have caused an increased interest in natural and effective antimicrobial alternatives. For instance, natural antimicrobial elements synthesized by lactic acid bacteria (LAB) are generally inhibitory to pathogens and significantly impede the action of food spoilage organisms. Bacteriocins and other LAB metabolites have been commercially exploited for their antimicrobial properties and used in many applications in the dairy industry to prevent the growth of undesirable microorganisms. In this review, we summarized the natural antimicrobial compounds produced by LAB, with a specific focus on the mechanisms of action and applications for microbial food spoilage prevention and disease control. In addition, we provide support in the review for our recommendation for the application of LAB as a potential alternative antimicrobial strategy for addressing the challenges posed by antibiotic resistance among pathogens.

Effect of Pulsed Electric Field (PEF) on Bacterial Viability and Whey Protein in the Processing of Raw Milk

There is growing concern regarding the nutritional value of processed food products. Although thermal pasteurization, used in food processing, is a safe method and is widely applied in the food industry, food products lack quality and nutritional value because of the high temperatures used during pasteurization. In this study, the effect of pulsed electric field (PEF) processing on whey protein content and bacterial viability in raw milk was evaluated by changing the PEF strength and number of pulses. For comparison, traditional pasteurization techniques, such as low-temperature long-time (LTLT), ultra-high temperature (UHT), and microfiltration (MF), were also tested for total whey protein content, bacterial activity, and coliforms. We found that, after treatment with PEF, a significant decrease in total bacterial viability of 2.43 log and coliforms of 0.9 log was achieved, although undenatured whey protein content was not affected at 4.98 mg/mL. While traditional pasteurization techniques showed total bacterial inactivation, they were detrimental for whey protein content: β-lactoglobulin was not detected using HPLC in samples treated with UHT. LTLT treatment led to a significant decrease of 75% in β-lactoglobulin concentration; β-lactoglobulin content in milk samples treated with MF was the lowest compared to LTLT and UHT pasteurization, and ~10% and 27% reduction was observed.

The effect of ultrasound treatment in combination with nisin on the inactivation of Listeria innocua and Escherichia coli

Ultrasound, alone or in combination with natural antimicrobials, is a novel food processing technology of interest to replace traditional food decontamination methods, as it is milder than classical sterilisation (heat treatment) and maintains desirable sensory characteristics. However, ultrasound efficacy can be affected by food structure/composition, as well as the order in which combined treatments are applied. More specifically, treatments which target different cell components could result in enhanced inactivation if applied in the appropriate order. The microbial properties i.e. Gram positive/Gram negative can also impact the treatment efficacy. This work presents a systematic study of the combined effect of ultrasound and nisin on the inactivation of the bacteria Listeria innocua (Gram positive) and Escherichia coli (Gram negative), at a range of cavitation conditions (44, 500, 1000 kHz). The order of treatment application was varied, and the impact of system structure was also investigated by varying the concentration of Xanthan gum used to create the food model systems (0 - 0.5% w/v). Microbial inactivation kinetics were monitored, and advanced microscopy and flow cytometry techniques were utilised to quantify the impact of treatment on a cellular level. Ultrasound was shown to be effective against E. coli at 500 kHz only, with L. innocua demonstrating resistance to all frequencies studied. Enhanced inactivation of E. coli was observed for the combination of nisin and ultrasound at 500 kHz, but only when nisin was applied before ultrasound treatment. The system structure negatively impacted the inactivation efficacy. The combined effect of ultrasound and nisin on E. coli was attributed to short-lived destabilisation of the outer membrane as a result of sonication, allowing nisin to penetrate the cytoplasmic membrane and facilitate cell inactivation.

Preharvest Management and Postharvest Intervention Strategies to Reduce Escherichia coli Contamination in Goat Meat: A Review

Simple Summary

Goat farms and processing facilities worldwide are primarily small-scale, limited resource operations. Cost-effectiveness and practicality are critical factors to be considered before adopting any pre- and/or post-harvest strategies for pathogen reduction in goat meat. Preharvest management methods in goats that can reduce Escherichia coli in meat include minimizing animal stress, selecting diets and feed deprivation times that can reduce fecal shedding of bacteria, and adding tannin-rich feed supplements. In addition, use of appropriate postharvest nonthermal intervention technologies that can reduce microbial loads in carcasses and meat can extend the shelf-life and marketability of goat meat products. Reducing stress prior to slaughter and using nonthermal intervention methods can result in better meat quality and economic returns for producers.

Abstract

Goat meat is the main source of animal protein in developing countries, particularly in Asia and Africa. Goat meat consumption has also increased in the US in the recent years due to the growing ethnic population. The digestive tract of goat is a natural habitat for Escherichia coli organisms. While researchers have long focused on postharvest intervention strategies to control E. coli outbreaks, recent works have also included preharvest methodologies. In goats, these include minimizing animal stress, manipulating diet a few weeks prior to processing, feeding diets high in tannins, controlling feed deprivation times while preparing for processing, and spray washing goats prior to slaughter. Postharvest intervention methods studied in small ruminant meats have included spray washing using water, organic acids, ozonated water, and electrolyzed water, and the use of ultraviolet (UV) light, pulsed UV-light, sonication, low-voltage electricity, organic oils, and hurdle technologies. These intervention methods show a strong antimicrobial activity and are considered environmentally friendly. However, cost-effectiveness, ease of application, and possible negative effects on meat quality characteristics must be carefully considered before adopting any intervention strategy for a given meat processing operation. As discussed in this review paper, novel pre- and post-harvest intervention methods show significant potential for future applications in goat farms and processing plants.

A comprehensive review on impact of non-thermal processing on the structural changes of food components

Non-thermal food processing is a viable alternative to traditional thermal processing to meet customer needs for high-quality, convenient and minimally processed foods. They are designed to eliminate elevated temperatures during processing and avoid the adverse effects of heat on food products. Numerous thermal and novel non-thermal technologies influence food structure at the micro and macroscopic levels. They affect several properties such as rheology, flavour, process stability, texture, and appearance at microscopic and macroscopic levels. This review presents existing knowledge and advances on the impact of non-thermal technologies, for instance, cold plasma treatment, irradiation, high-pressure processing, ultrasonication, pulsed light technology, high voltage electric field and pulsed electric field treatment on the structural changes of food components. An extensive review of the literature indicates that different non-thermal processing technologies can affect the food components, which significantly affects the structure of food. Applications of novel non-thermal technologies have shown considerable impact on food structure by altering protein structures via free radicals or larger or smaller molecules. Lipid oxidation is another process responsible for undesirable effects in food when treated with non-thermal techniques. Non-thermal technologies may also affect starch properties, reduce molecular weight, and change the starch granule's surface. Such modification of food structure could create novel food textures, enhance sensory properties, improve digestibility, improve water-binding ability and improve mediation of gelation processes. However, it is challenging to determine these technologies' influence on food components due to differences in their primary operation and equipment design mechanisms and different operating conditions. Hence, to get the most value from non-thermal technologies, more in-depth research about their effect on various food components is required.

Gene Erosion Can Lead to Gain-of-Function Alleles That Contribute to Bacterial Fitness

Despite our extensive knowledge of the genetic regulation of heat shock proteins (HSPs), the evolutionary routes that allow bacteria to adaptively tune their HSP levels and corresponding proteostatic robustness have been explored less. In this report, directed evolution experiments using the Escherichia coli model system unexpectedly revealed that seemingly random single mutations in its tnaA gene can confer significant heat resistance. Closer examination, however, indicated that these mutations create folding-deficient and aggregation-prone TnaA variants that in turn can endogenously and preemptively trigger HSP expression to cause heat resistance. These findings, importantly, demonstrate that even erosive mutations with disruptive effects on protein structure and functionality can still yield true gain-of-function alleles with a selective advantage in adaptive evolution.

Divergicin M35-Chitosan Film: Development and Characterization

Chitosan films loaded with bacteriocin were examined by FTIR spectroscopy, tested for color, puncture strength, water vapor permeability, and as antimicrobials of Listeria innocua HPB13. Divergicin M35, a bacteriocin produced by Carnobacterium divergens, was incorporated into films made with chitosan of molecular mass 2 kDa, 20 kDa, or 100 kDa and de-acetylated either 87% or 95%. Only 100 kDa chitosan yielded films that could be peeled and handled easily. The higher degree of de-acetylation increased the total color factor (ΔE) of bacteriocin-loaded films, their permeability, and puncture strength. Incorporation of divergicin M35 into the films increased amide I peak intensity but otherwise did not induce significant structural change. The FTIR spectra of divergicin M35 shed from the films did not differ from those of the original free bacteriocin, except in overall peak intensity. The release of active divergicin M35 from the film was faster into the buffer than into tryptic soy broth and peaked at 10-12 h in both cases. Chitosan 95% de-acetylated and loaded with divergicin M35 was the most active, producing a six-log drop in Listeria innocua HPB13 viable count within 24 h. These results suggest that the biocompatible and biodegradable films developed here have the potential for application as antimicrobials of Listeria spp. in foods, especially ready-to-eat, minimally processed products.

Synergistic inactivation of bacteria based on a combination of low frequency, low-intensity ultrasound and a food grade antioxidant

This study evaluated a synergistic antimicrobial treatment using a combination of low frequency and a low-intensity ultrasound (LFU) and a food-grade antioxidant, propyl gallate (PG), against a model gram-positive (Listeria innocua) and the gram-negative bacteria (Escherichia coli O157:H7). Bacterial inactivation kinetic measurements were complemented by characterization of biophysical changes in liposomes, changes in bacterial membrane permeability, morphological changes in bacterial cells, and intracellular oxidative stress upon treatment with PG, LFU, and a combination of PG + LFU. Combination of PG + LFU significantly (>4 log CFU/mL, P < 0.05) enhanced the inactivation of both L. innocua and E. coli O157:H7 compared to PG or LFU treatment. As expected, L. innocua had a significantly higher resistance to inactivation compared to E. coli using a combination of PG + LFU. Biophysical measurements in liposomes, bacterial permeability measurements, and scanning electron microscope (SEM)-based morphological measurements show rapid interactions of PG with membranes. Upon extended treatment of cells with PG + LFU, a significant increase in membrane damage was observed compared to PG or LFU alone. A lack of change in the intracellular thiol content following the combined treatment and limited effectiveness of exogenously added antioxidants in attenuating the synergistic antimicrobial action demonstrated that oxidative stress was not a leading mechanism responsible for the synergistic inactivation by PG + LFU. Overall, the study illustrates synergistic inactivation of bacteria using a combination of PG + LFU based on enhanced membrane damage and its potential for applications in the food and environmental systems.

Impact of chlorine dioxide and electron-beam irradiation for the reduction of murine norovirus in low-salted "jogaejeotgal", a traditional Korean salted and fermented clam

Clam jeotgal, called "jogaejeotgal," is a Korean fermented seafood product with, generally, a high amount of added salt to inhibit the growth of pathogenic microorganisms. This study aimed to evaluate the efficacy of chlorine dioxide (ClO₂) and sodium hypochlorite (NaOCl) against murine norovirus 1 (MNV-1), a surrogate for human norovirus, in salt-fermented clam, jogaejeotgal. The sequential effect of ClO₂ and electron-beam (e-beam) irradiation on the inactivation of MNV-1 was also investigated. Treatments of up to 300 ppm ClO₂ and 1000 ppm NaOCl were used to determine the disinfectant concentrations at which more than 1 log (90%) MNV-1 inactivation occurred. The sequential treatment of ClO₂ (50-300 ppm) and e-beam (1-5.5 kGy) was performed after storage at 4 °C for 7 days. There was a 1.9-log reduction of the virus in seasoned clams irradiated at 5.5 kGy after ClO₂ treatment at 300 ppm. No significant change (p > 0.05) in physicochemical quality was observed after the combined treatment, suggesting the potential for the use of a combined treatment using ClO₂ (300 ppm) and e-beam (5.5 kGy) in the jeotgal manufacturing industry for the reduction of norovirus.

Potential Pharmaceutical and Food Applications of Postbiotics: A Review

In recent decades, functional foods with ingredients comprising probiotics, prebiotics and postbiotics have been gaining a lot of attention from scientists. Probiotics and postbiotics are usually applied in pharmaceutical formulations and/or commercial food-based products. These bioactive agents can be associated with host eukaryotic cells and have a key role in maintaining and restoring host health. The review describes the concept of postbiotics, their quality control and potential applications in pharmaceutical formulations and commercial food-based products for health promotion, prevention of disease and complementary treatment. Despite the effectiveness of probiotic products, researchers have introduced the concept of postbiotic to optimize their beneficial effects as well as to meet the needs of consumers to provide a safe product. The finding of recent studies suggests that postbiotics might be appropriate alternative agents for live probiotic cells and can be applied in medical, veterinary and food practice to prevent and to treat some diseases, promote animal health status and develop functional foods. Presently scientific literature confirms that postbiotics, as potential alternative agents, may have superiority in terms of safety relative to their parent live cells, and due to their unique characteristics in terms of clinical, technological and economical aspects, can be applied as promising tools in the drug and food industry for developing health benefits, and therapeutic aims.

The impact of food model system structure on the inactivation of Listeria innocua by cold atmospheric plasma and nisin combined treatments

Novel processing methods such as cold atmospheric plasma (CAP) and natural antimicrobials like nisin, are of interest to replace traditional food decontamination approaches as, due to their mild nature, they can maintain desirable food characteristics, i.e., taste, texture, and nutritional content. However, the microbial growth characteristics (planktonic growth/surface colonies) and/or the food structure itself (liquid/solid surface) can impact the inactivation efficacy of these novel processing methods. More specifically, cells grown as colonies on a solid(like) surface experience a completely different growth environment to cells grown planktonically in liquid, and thus could display a different response to novel processing treatments through stress adaptation and/or cross protection mechanisms. The order in which combined treatments are applied could also impact their efficacy, especially if the mechanisms of action are complementary. This work presents a fundamental study on the efficacy of CAP and nisin, alone and combined, as affected by food system structure. More specifically, Listeria innocua was grown planktonically (liquid broth) or on a viscoelastic Xanthan gum gel system (1.5% w/v) and treated with CAP, nisin, or a combination of the two. Both the inactivation system, i.e., liquid versus solid(like) surface and the growth characteristics, i.e., planktonic versus colony growth, were shown to impact the treatment efficacy. The combination of nisin and CAP was more effective than individual treatments, but only when nisin was applied before the CAP treatment. This study provides insight into the environmental stress response/adaptation of L. innocua grown on structured systems in response to natural antimicrobials and novel processing technologies, and is a step towards the faster delivery of these food decontamination methods from the bench to the food industry.

Effects of Solution pH and Ions on Suicidal Germination of Bacillus subtilis Spores Induced by Medium High Temperature-Medium High Hydrostatic Pressure Treatment

Spores of Bacillus subtilis suspended in water or aqueous solution of NaCl, CaCl₂, sodium lactate, or calcium lactate at pH 4 - 7 was subjected to spore inactivation by simultaneous combination of medium high hydrostatic pressure (MHHP; 100 MPa) treatment for germination and medium high temperature (MHT; 65℃) treatment for pasteurization of germinated vegetative cells. The spores at pH 4 in NaCl solution and those at pH 5 and 6 in Na lactate solutions were less killed than in water by MHHP+MHT treatment. Spore inactivation was promoted by calcium ion in NaCl solution at pH 4 and in Na lactate solutions at pH 5 and pH 6, while it was more suppressed at pH 5 and pH 6 in Na lactate solutions than at pH 4 in NaCl solution. The spores treated by MHHP+MHT in NaCl or Na lactate solution at pH 4 were further killed by subsequent MHT treatment.

Inactivation of Escherichia coli O157:H7 by High Hydrostatic Pressure Combined with Gas Packaging

The inactivation of Escherichia coli O157:H7 (E. coli) in physiological saline and lotus roots by high hydrostatic pressure (HHP) in combination with CO₂ or N₂ was studied. Changes in the morphology, cellular structure, and membrane permeability of the cells in physiological saline after treatments were investigated using scanning electron microscopy, transmission electron microscopy, and flow cytometry, respectively. It was shown that after HHP treatments at 150–550 MPa, CO₂-packed E. coli cells had higher inactivation than the N₂-packed and vacuum-packed cells, and no significant difference was observed in the latter two groups. Further, both the morphology and intracellular structure of CO₂-packed E.coli cells were strongly destroyed by high hydrostatic pressure. However, serious damage to the intracellular structures occurred in only the N₂-packed E. coli cells. During HHP treatments, the presence of CO₂ caused more disruptions in the membrane of E. coli cells than in the N₂-packed and vacuum-packed cells. These results indicate that the combined treatment of HHP and CO₂ had a strong synergistic bactericidal effect, whereas N₂ did not have synergistic effects with HHP. Although these two combined treatments had different effects on the inactivation of E. coli cells, the inactivation mechanisms might be similar. During both treatments, E. coli cells were inactivated by cell damage induced to the cellular structure through the membrane components and the extracellular morphology, unlike the independent HHP treatment.

Microbes associated with fresh produce: Sources, types and methods to reduce spoilage and contamination

Global food security remains one of the most important challenges that needs to be addressed to ensure the increasing demand for food of the fast growing human population is satisfied. Fruits and vegetables comprise an essential component of a healthy balanced diet as they are the major source of both macro- and micronutrients. They are particularly important for communities in developing countries whose nutrition often relies solely on a plant-based diet. Recent advances in agriculture and food processing technologies have facilitated production of fresh, nutritious and safe food for consumers. However, despite the development of sophisticated chemical and physical methods of food and equipment disinfection, fresh-cut produce and fruit juice industry still faces significant economic losses due to microbial spoilage. Furthermore, fresh produce remains an important source of pathogens that have been causing outbreaks of human illness worldwide. This chapter characterizes common spoilage and human pathogenic microorganisms associated with fresh-cut produce and fruit juice products, and discusses the methods and technology that have been developed and utilized over the years to combat them. Substantial attention is given to highlight advantages and disadvantages of using these methods to reduce microbial spoilage and their efficacy to eliminate human pathogenic microbes associated with consumption of fresh-cut produce and fruit juice products.

Modelling the microbial dynamics and antimicrobial resistance development of Listeria in viscoelastic food model systems of various structural complexities

Minimal processing for microbial decontamination, such as the use of natural antimicrobials, is gaining interest in the food industry as these methods are generally milder than conventional processing, therefore better maintaining the nutritional content and sensory characteristics of food products. The aim of this study was to quantify the impact of (i) structural composition and complexity, (ii) growth location and morphology, and (iii) the natural antimicrobial nisin, on the microbial dynamics of Listeria innocua. More specifically, viscoelastic food model systems of various compositions and internal structure were developed and characterised, i.e. monophasic Xanthan gum-based and biphasic Xanthan gum/Whey protein-based viscoelastic systems. The microbial dynamics of L. innocua at 10 °C, 30 °C and 37 °C were monitored and compared for planktonic growth in liquid, or in/on (immersed or surface colony growth) the developed viscoelastic systems, with or without a sublethal concentration of nisin. Microscopy imaging was used to determine the bacterial colony size and spatial organisation in/on the viscoelastic systems. Selective growth of L. innocua on the protein phase of the developed biphasic system was observed for the first time. Additionally, significant differences were observed in the colony size and distribution in the monophasic Xanthan gum-based systems depending on (i) the type of growth (surface/immersed) and (ii) the Xanthan gum concentration. Furthermore, the system viscosity in monophasic Xanthan gum-based systems had a protective role against the effects of nisin for immersed growth, and a further inhibitory effect for surface growth at a suboptimal temperature (10 °C). These findings give a systematic quantitative insight on the impact of nisin as an environmental challenge on the growth and spatial organisation of L. innocua, in viscoelastic food model systems of various structural compositions/complexities. This study highlights the importance of accounting for system structural composition/complexity when designing minimal food processing methods with natural antimicrobials.

Development and quality assessment of a turbid carrot-orange juice blend processed by UV-C light assisted by mild heat and addition of Yerba Mate (Ilex paraguariensis) extract

Carrot-orange juice processed by UV-C (10.6 kJ/m²) assisted with mild heat (H, 50 °C) and yerba mate addition (E) was obtained. UV-C/H + E treated juice was examined for native flora, polyphenol content (PC), total antioxidant activity (TAA), colour, turbidity, °Brix and pH along storage (4 °C). Consumer profiling studies were performed. UV-C/H + E provoked 2.6-5.7 native flora log reductions, preventing from recovery during 24 day-storage. The UV-C/H + E juice exhibited a significant increase in PC (720.2 µg/mL) and TAA (5.5 mg/mL) compared to untreated (PC = 205.0 µg/mL/TAA = 0.7 mg/mL) and single treated juices (PC = 302.1-408.0 µg/mL/TAA = 0.7-2.4 mg/mL), remaining constant throughout storage. UV-C/H + E juice exhibited scarce changes in colour. Nevertheless, increases in °Brix and turbidity were observed compared to single treatments. A cluster sensory analysis revealed that one group showed a marked interest in UVC/H + E beverages with herbal taste and strong aroma. CATA question revealed that some improvements should be introduced in order to satisfy the consumers' ideally beverage.

Inactivation of Salmonella Typhimurium in fresh cherry tomatoes using combined treatment of UV-TiO2 photocatalysis and high hydrostatic pressure

The antibacterial efficacy of UV-TiO₂ photocatalysis pre-washing in a water-assisted system (UVT, 4.5 mW/cm², 5-15 min) and high hydrostatic pressure (HHP, 300-500 MPa, 1 min at 25 °C) post-package combined treatment was evaluated against Salmonella Typhimurium inoculated onto whole cherry tomato surfaces and compared with chlorine disinfection (200 ppm). An air pump was fitted at the bottom of UVT reactor to create turbulent flow for rotation of fruits for uniform disinfection. UVT-HHP combined treatment at 500 MPa achieved bacterial reduction of more than 5 log via a synergistic effect, compared with chlorine disinfection. Lycopene and total phenolic contents and antioxidant activities were not significantly changed in tomatoes after any treatment. UVT-HHP combined treatment did not affect the surface color but caused softness in tomatoes. UVT pre-washing followed by HHP post-package treatment can be the effective intervention strategy alternative to conventional chlorine disinfection for production of ready-to-eat (RTE) fresh cherry tomatoes.

Application of nisin-assisted thermosonication processing for preservation and quality retention of fresh apple juice

The effects of thermosonication (TS) and 100 ppm nisin-assisted TS (TS + nisin) on the inactivation of naturally occurring microorganisms, retention of nutritional quality and extension of shelf life of fresh apple juice were evaluated, with nisin and mild heat (nisin + MH) treatments as control. Fresh apple juice was addressed by nisin + MH, TS and TS + nisin at 37, 42, 47, and 52 °C for 5-40 min. After processing, microbial growth was evaluated during storage at 8 °C at every 5 days. Temperature played a vital role in the inactivation of aerobic bacteria and yeasts and molds by TS and TS + nisin, higher temperature up to 52 °C could cause a considerable inactivation of microbial cells in apple juice. As apple juice was subjected to TS and TS + nisin at 52 °C for 30 min, retention of original quality including 89% ascorbic acid, non-visible color change, no significant alteration in BD, pH, TA and TSS values of fresh apple juice, and extension shelf life to 15 d at 8 °C were obtained. Nisin exhibit additional inactivation effect of aerobic bacteria in apple juice while not obviously effect on yeast and molds. These results indicated a potential application of TS and TS + nisin (100 ppm) to produce fresh-like quality apple juice and/or to extend its shelf life.