Controlled release of an osteogenic peptide from injectable biodegradable polymeric composites

Optimizing lornoxicam-loaded poly(lactic-co-glycolic acid) and (polyethylene glycol) nanoparticles for transdermal delivery: ex vivo/in vivo inflammation evaluation

Aim: This study focused on developing a topical gel incorporating lornoxicam-loaded poly(lactic-co-glycolic acid) and polyethylene glycol (PLGA-PEG) blend nanoparticles to mitigate gastrointestinal (GIT) side effects and enhance therapeutic efficacy. Materials & methods: Synthesized nanoparticles were subjected to in vitro characterization, ex vivo permeation studies, and acute oral toxicity analysis post-incorporation into the gel using a S/O/W double emulsion solvent. Results & conclusion: The nanoparticles displayed a smooth, spherical morphology (170-321 nm) with increased entrapment efficiency (96.2%). LOX exhibited a permeation rate of 70-94% from the nanoparticle-infused gel, demonstrating favorable biocompatibility at the cellular level. The formulated gel, enriched with nanoparticles, holds promising prospects for drug-delivery systems and promising improved therapeutic outcomes for LOX.

Particle carriers for controlled release of peptides

There has been growing discovery and use of therapeutic peptides in drug delivery and tissue engineering. Peptides are smaller than proteins and can be formulated into drug delivery systems without significant loss of their bioactivity, which remains a concern with proteins. However, the smaller size of peptides has made the controlled release of these bioactive molecules from carriers challenging. Thus, there has been increasing development of carriers to improve the controlled release of peptides by leveraging hydrophobic and electrostatic interactions between the peptide and the carrier. The focus of this review paper is to critically discuss synthetic and natural nanoparticles and microparticles that have been investigated for the controlled delivery of peptides with emphasis on the underlying interactions.

Surface Adsorption-Mediated Ultrahigh Efficient Peptide Encapsulation with a Precise Ratiometric Control for Type 1 and 2 Diabetic Therapy

A surface adsorption strategy is developed to enable the engineering of microcomposites featured with ultrahigh loading capacity and precise ratiometric control of co-encapsulated peptides. In this strategy, peptide molecules (insulin, exenatide, and bivalirudin) are formulated into nanoparticles and their surface is decorated with carrier polymers. This polymer layer blocks the phase transfer of peptide nanoparticles from oil to water and, consequently, realizes ultrahigh peptide loading degree (up to 78.9%). After surface decoration, all three nanoparticles are expected to exhibit the properties of adsorbed polymer materials, which enables the co-encapsulation of insulin, exenatide, and bivalirudin with a precise ratiometric control. After solidification of this adsorbed polymer layer, the release of peptides is synchronously prolonged. With the help of encapsulation, insulin achieves 8 days of glycemic control in type 1 diabetic rats with one single injection. The co-delivery of insulin and exenatide (1:1) efficiently controls the glycemic level in type 2 diabetic rats for 8 days. Weekly administration of insulin and exenatide co-encapsulated microcomposite effectively reduces the weight gain and glycosylated hemoglobin level in type 2 diabetic rats. The surface adsorption strategy sets a new paradigm to improve the pharmacokinetic and pharmacological performance of peptides, especially for the combination of peptides.

Acid Scavenger Free Synthesis of Oligo(Poly(Ethylene Glycol) Fumarate) Utilizing Inert Gas Sparging

The macromolecule oligo(poly(ethylene glycol) fumarate) (OPF) exhibits promising attributes for creating suitable three-dimensional hydrogel environments to study cell behavior, deliver therapeutics, and serve as a degradable, nonfouling material. However, traditional synthesis techniques are time consuming, contain salt contaminants, and generate significant waste. These issues have been overcome with an alternative, one-pot approach that utilizes inert gas sparging. Departing from previous synthetic schemes that require acid scavengers, inert gas sparging removes byproducts in situ, eliminating significant filtration and postprocessing steps, while allowing a more uniform product. Characterized by nuclear magnetic resonance, gel permeation chromatography, and differential scanning calorimetry, nitrogen sparge synthesis yields an OPF product with greater polymer length than traditional acid scavenger synthesis methods. Furthermore, nitrogen-sparged OPF readily crosslinks using either ultraviolet or thermal initiator methods with or without the addition of short-chain diacrylate units, allowing for greater tunability in hydrogel properties with little to no cytotoxicity. Overall, inert gas sparging provides a longer chain and cleaner polymer product for hydrogel material studies while maintaining degradable characteristics. Impact statement Using nitrogen sparging, we have demonstrated that oligo(poly(ethylene glycol) fumarate) (OPF) can be produced with decreased postprocessing, increased product purity, greater oligomerization, and cell viability. These properties lead to greater tunability in mechanical properties and a more versatile hydrogel for biomedical applications. The simplification of synthesis and elimination of impurities will expand the utility of OPF as a degradable hydrogel for cell culture, tissue engineering, regenerative medicine, and therapeutic delivery, among other applications.

Introduction of Enzyme-Responsivity in Biomaterials to Achieve Dynamic Reciprocity in Cell-Material Interactions

Much effort has been made in the development of biomaterials that synthetically mimic the dynamics of the natural extracellular matrix in tissues. Most of these biomaterials specifically interact with cells, but lack the ability to adapt and truly communicate with the cellular environment. Communication between biomaterials and cells is achieved by the development of various materials with enzyme-responsive moieties in order to respond to cellular cues. In this perspective, we discuss different enzyme-responsive systems, from surfaces to supramolecular assemblies. Additionally, we highlight their further prospects in order to create, inspired by nature, fully autonomous adaptive biomaterials that display dynamic reciprocal behavior. This Perspective shows new strategies for the development of biomaterials that may find broad utility in regenerative medicine applications, from scaffolds for tissue engineering to systems for controlled drug delivery.

Ion Exchange Controlled Drug Release from Polymerized Ionic Liquids

In this work ion functionalized hydrogels as potent drug delivery systems are presented. The ion functionalization of the hydrogel enables the retention of ionic drug molecules and thus a reduction of burst release effects. Timolol maleate in combination with polymerized anionic 3-sulfopropylmethacrylate potassium and ibuprofen combined with cationic poly-[2-(methacryloyloxy)ethyl] trimethylammonium chloride are investigated in respect to their drug release profile. The results are showing an ion exchange depending release behavior instead of a diffusion-controlled drug release as it is known from common drug delivery systems. Furthermore, the suitability of such hydrogels for standard methods for sterilization is investigated.

Bioactive proteins delivery through core-shell nanofibers for meniscal tissue regeneration

Mimicking the ultrastructural morphology of the meniscus with nanofiber scaffolds, coupled with controlled growth-factor delivery to the appropriate cells, can help engineer tissue with the potential to grow, mature, and regenerate after in vivo implantation. We electrospun nanofibers encapsulating platelet-derived growth factor (PDGF-BB), which is a potent mitogen and chemoattractant in a core of serum albumin contained within a shell of polylactic acid. We controlled the local PDGF-BB release by adding water-soluble polyethylene glycol to the polylactic acid shell to serve as a porogen. The novel core-shell nanofibers generated 3D scaffolds with an interconnected macroporous structure, with appropriate mechanical properties and with high cell compatibility. Incorporating PDGF-BB increased cell viability, proliferation, and infiltration, and upregulated key genes involved in meniscal extracellular matrix synthesis in human meniscal and synovial cells. Our results support proof of concept that these core-shell nanofibers can create a cell-favorable nanoenvironment and can serve as a system for sustained release of bioactive factors.

Cell membrane coating for reducing nanoparticle-induced inflammatory responses to scaffold constructs

The controlled release of therapeutics from micro or nanoparticles has been well-studied. Incorporation of these particles inside biomaterial scaffolds is promising for tissue regeneration and immune modulation. However, these particles may induce inflammatory and foreign body responses to scaffold constructs, limiting their applications. Here we show that widely used poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) formed by double emulsion dramatically increased neutrophil infiltration and pro-inflammatory cytokines in alginate scaffolds 1 day after the subcutaneous injection of the scaffolds into mice. The coating of red blood cell (RBC) membranes on PLGA NPs completely eliminated these short-term inflammatory responses. For a longer term of 10 days, neither PLGA NPs nor RBC membrane-coated nanoparticles exerted a significant effect on the infiltration of neutrophils or macrophages in alginate scaffolds possibly due to the degradation and/or clearance of nanoparticles by infiltrating cells by that time. Despite the extensive exploration of cell membrane-coated nanoparticles, our study is the first to investigate the effects of cell membrane coating on foreign body reaction to nanoparticles. Harnessing the natural biocompatibility of cell membranes, our strategy of anti-inflammatory protection for scaffolds may be pivotal for many applications, such as those relying on the recruitment of stem cells and/or progenitor cells to scaffolds.

Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication

Solid freeform techniques are revolutionising technology with great potential to fabricate highly organized biodegradable scaffolds for damaged tissues and organs. Scaffolds fabricated via Solid freeform (SFF) techniques have more pronounced effect in bone tissue engineering. SFF techniques produce various types of scaffolds from different biomaterials with specific pore size, geometries, orientation, interconnectivity and anatomical shapes. Scaffolds needs to be designed from such biomaterials which can attach directly to natural tissues and mimic its properties, so ideally mechanical properties of scaffolds should be same as that of regenerating tissues for best results. The scaffolds designed without optimized mechanical properties would lead to the reduced nutrition diffusion within tissue engineered constructs (TECs) causing tissue necrosis. These scaffolds are mainly processed from ceramics and polymers like calcium phosphate, polydioxane, €-polycaprolactone, polylactic and polyglycolic acids etc. While, hydrogel scaffolds provide bridge for encapsulated cells and tissues to integrate with natural ECM. Likewise, 2D images from radiography were not sufficient for the prediction of the brain structure, cranial nerves, vessel and architecture of base of the skull and bones, which became possible using the 3D prototyping technologies. Any misrepresentation can lead to fatal outcomes. Biomodelling from these techniques for spinal surgery and preoperative planning are making its way toward successful treatment of several spinal deformities and spinal tumor. In this review we explored laser based and printing SFF techniques following its methodologies, principles and most recent areas of application with its achievements and possible challenges faced during its applications.

The use of bioactive peptides to modify materials for bone tissue repair

It has been well recognized that the modification of biomaterials with appropriate bioactive peptides could further enhance their functions. Especially, it has been shown that peptide-modified bone repair materials could promote new bone formation more efficiently compared with conventional ones. The purpose of this article is to give a general review of recent studies on bioactive peptide-modified materials for bone tissue repair. Firstly, the main peptides for inducing bone regeneration and commonly used methods to prepare peptide-modified bone repair materials are introduced. Then, current in vitro and in vivo research progress of peptide-modified composites used as potential bone repair materials are reviewed and discussed. Generally speaking, the recent related studies have fully suggested that the modification of bone repair materials with osteogenic-related peptides provide promising strategies for the development of bioactive materials and substrates for enhanced bone regeneration and the therapy of bone tissue diseases. Furthermore, we have proposed some research trends in the conclusion and perspectives part.

Biomimetic approaches in bone tissue engineering: Integrating biological and physicomechanical strategies

The development of responsive biomaterials capable of demonstrating modulated function in response to dynamic physiological and mechanical changes in vivo remains an important challenge in bone tissue engineering. To achieve long-term repair and good clinical outcomes, biologically responsive approaches that focus on repair and reconstitution of tissue structure and function through drug release, receptor recognition, environmental responsiveness and tuned biodegradability are required. Traditional orthopedic materials lack biomimicry, and mismatches in tissue morphology, or chemical and mechanical properties ultimately accelerate device failure. Multiple stimuli have been proposed as principal contributors or mediators of cell activity and bone tissue formation, including physical (substrate topography, stiffness, shear stress and electrical forces) and biochemical factors (growth factors, genes or proteins). However, optimal solutions to bone regeneration remain elusive. This review will focus on biological and physicomechanical considerations currently being explored in bone tissue engineering.

Injectable foams for regenerative medicine

The design of injectable biomaterials has attracted considerable attention in recent years. Many injectable biomaterials, such as hydrogels and calcium phosphate cements (CPCs), have nanoscale pores that limit the rate of cellular migration and proliferation. While introduction of macroporosity has been suggested to increase cellular infiltration and tissue healing, many conventional methods for generating macropores often require harsh processing conditions that preclude their use in injectable foams. In recent years, processes such as porogen leaching, gas foaming, and emulsion-templating have been adapted to generate macroporosity in injectable CPCs, hydrogels, and hydrophobic polymers. While some of the more mature injectable foam technologies have been evaluated in clinical trials, there are challenges remaining to be addressed, such as the biocompatibility and ultimate fate of the sacrificial phase used to generate pores within the foam after it sets in situ. Furthermore, while implantable scaffolds can be washed extensively to remove undesirable impurities, all of the components required to synthesize injectable foams must be injected into the defect. Thus, every compound in the foam must be biocompatible and noncytotoxic at the concentrations utilized. As future research addresses these critical challenges, injectable macroporous foams are anticipated to have an increasingly significant impact on improving patient outcomes for a number of clinical procedures.

Investigation of cenderitide controlled release platforms for potential local treatment of cardiovascular pathology

In this work, we focused on the development and investigation of controlled release matrices for a novel cardiotherapeutic peptide, cenderitide (CD-NP) that has shown to be useful for control of ventricular remodeling. To circumvent the hydrophilicity disparity between CD-NP and hydrophobic polymer matrix, a cosolvent system (water/dichloromethane) was selected for investigation. The effect of emulsification conditions, addition of poly(ethylene glycol) (PEG) and its copolymer on the release mechanism and profile were investigated. To verify the retention of bioactivity of entrapped CD-NP in different formulations, the generation of 3',5' cyclic guanosine monophospate (cGMP) and the inhibition of human cardiac fibroblast (HCF) were evaluated. The results showed that neat poly(ε-caprolactone) matrices carried out via two distinct emulsification conditions had either an unacceptably high burst or incomplete release of CD-NP; and the addition of PEG and its copolymer obtained intermediate profiles. Our confocal laser scanning microscopy and surface morphological investigations showed that the copolymer excipient was superior in playing stabilizer role by colocalizing and redistributing peptide throughout the matrix, making the release less sensitive to emulsification conditions. Furthermore, the released CD-NP is able to generate the cGMP and inhibit the HCF proliferation. Our investigations showed that CD-NP-loaded platforms can be a feasible option to provide sustained antifibrotic moderation of fibrotic scar formation and be potentially used to alleviate the adverse effects of cardiac remodeling.

Design and preparation of polymeric scaffolds for tissue engineering

Polymeric scaffolds for tissue engineering can be prepared with a multitude of different techniques. Many diverse approaches have recently been under development. The adaptation of conventional preparation methods, such as electrospinning, induced phase separation of polymer solutions or porogen leaching, which were developed originally for other research areas, are described. In addition, the utilization of novel fabrication techniques, such as rapid prototyping or solid free-form procedures, with their many different methods to generate or to embody scaffold structures or the usage of self-assembly systems that mimic the properties of the extracellular matrix are also described. These methods are reviewed and evaluated with specific regard to their utility in the area of tissue engineering.

Silica-based mesoporous nanoparticles for controlled drug delivery

Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles.

Bone induction by biomimetic PLGA copolymer loaded with a novel synthetic RADA16-P24 peptide in vivo

Bone morphogenetic protein-2 (BMP-2) is a key bone morphogenetic protein, and poly(lactic-co-glycolic acid) (PLGA) has been widely used as scaffold for clinical use to carry treatment protein. In the previous studies, we have synthesized BMP-2-related peptide (P24) and found its capacity of inducing bone regeneration. In this research, we have synthesized a new amphiphilic peptide Ac-RADA RADA RADA RADA S[PO4]KIPKASSVPTELSAISTLYLDDD-CONH2 (RADA16-P24) with an assembly peptide RADA16-Ion the P24 item of BMP2 to form divalent ion-induced gelatin. Two methods of physisorption and chemical cross-linking were used to bind RADA16-P24 onto the surface of the copolymer PLGA to synthesize RADA16-P24-PLGA, and its capacity of attaching bone marrow stromal cells (BMSCs) was evaluated in vitro and inducing ectopic bone formation was examined in vivo. In vitro our results demonstrated that RADA16-P24-PLGA copolymer prepared by physisorbing or prepared by chemical cross-linking had a peptide binding rate of (2.0180±0.5296)% or (10.0820±0.8405)% respectively (P<0.05). In addition the BMSCs proliferated vigorously in the RADA16-P24-PLGA biomaterials. Significantly the percentage of BMSCs attached to RADA16-P24-PLGA composite prepared by chemical cross-linking and physisorbing were (71.4±7.5) % or (46.7±5.8) % (P<0.05). The in vivo study showed that RADA16-P24-PLGA chemical cross-linking could better induce ectopic bone formation compared with RADA16-P24-PLGA physisorbing and PLGA. It is concluded that the PLGA copolymer is a good RADA16-P24 carrier. This novel RADA16-P24-PLGA composite has strong osteogenic capability.

Tunable hybrid cryogels functionalized with microparticles as supermacroporous multifunctional biomaterial scaffolds

This study aims at incorporating microparticles (MPs) into polymeric network of cryogels to fabricate a multifunctional biomaterial scaffold (cryogel-microparticle [C-MP] composite) which has microstructured biocompatible pore surface, supermacroporous interconnected pore distribution and capability to simultaneously deliver bioactive molecules. Three types of MPs (i.e. poly(D,L-lactide-co-glycolide), chitosan, and silica MPs) were separately incorporated in three different cryogels (i.e. chitosan-agarose, chitosan-agarose-gelatin, and chitosan-gelatin), demonstrating the generality of the approach. Factors affecting distribution of MPs within the cryogel were investigated to achieve uniform distribution of MPs within the pore wall of cryogel as well as the whole cryogel monolith to create microstructured pore surface of C-MP composites, which was characterized by scanning electron microscopy, fluorescence microscopy, infrared spectral analysis (FTIR), and water uptake properties. Further, mouse embryonic fibroblasts (NIH 3T3), mouse myoblasts (C2C12), and human lung cancer cells (NCI-H460) were grown on microstructured C-MP composites and nonstructured cryogels to check adherence and growth of cells, and investigate their biocompatibility. To test the potential of C-MP composites for delivery of bioactive/drug molecules to cells growing in three-dimensional (3D) conditions, doxorubicin-loaded silica MP-chitosan-gelatin C-MP composites were fabricated and anti-proliferative effect of doxorubicin was observed on growing human cervical cancer cells (HeLa).

Peptide-based delivery to bone

Peptides are attractive as novel therapeutic reagents, since they are flexible in adopting and mimicking the local structural features of proteins. Versatile capabilities to perform organic synthetic manipulations are another unique feature of peptides compared to protein-based medicines, such as antibodies. On the other hand, a disadvantage of using a peptide for a therapeutic purpose is its low stability and/or high level of aggregation. During the past two decades, numerous peptides were developed for the treatment of bone diseases, and some peptides have already been used for local applications to repair bone defects in the clinic. However, very few peptides have the ability to form bone themselves. We herein summarize the effects of the therapeutic peptides on bone loss and/or local bone defects, including the results from basic studies. We also herein describe some possible methods for overcoming the obstacles associated with using therapeutic peptide candidates.

Injectable PLGA microsphere/calcium phosphate cements: physical properties and degradation characteristics

Calcium phosphate (CaP) cements show an excellent biocompatibility and often have a high mechanical strength, but in general degrade relatively slow. To increase degradation rates, macropores can be introduced into the cement, e.g., by the inclusion of biodegradable microspheres into the cement. The aim of this research is to develop an injectable PLGA microsphere/CaP cement with sufficient setting/cohesive properties and good mechanical and physical properties. PLGA microspheres were prepared using a water-in-oil-in-water double-emulsion technique. The CaP-cement used was Calcibon, a commercially available hydroxyapatite-based cement. 10:90 and 20:80 dry wt% PLGA microsphere/CaP cylindrical scaffolds were prepared as well as microporous cement (reference material). Injectability, setting time, cohesive properties and porosity were determined. Also, a 12-week degradation study in PBS (37 degree C) was performed. Results showed that injectability decreased with an increase in PLGA microsphere content. Initial and final setting time of the PLGA/CaP samples was higher than the microporous sample. Porosity of the different formulations was 40.8% (microporous), 60.2% (10:90) and 69.3% (20:80). The degradation study showed distinct mass loss and a pH decrease of the surrounding medium starting from week 6 with the 10:90 and 20:80 formulations, indicating PLGA erosion. Compression strength of the PLGA microsphere/CaP samples decreased siginificantly in time, the microporous sample remained constant. After 12 weeks both PLGA/CaP samples showed a structure of spherical micropores and had a compressive strength of 12.2 MPa (10:90) and 4.3 MPa (20:80). Signs of cement degradation were also found with the 20:80 formulation. In conclusion, all physical parameters were well within workable ranges with both 10:90 and 20:80 PLGA microsphere/CaP cements. After 12 weeks the PLGA was totally degraded and a highly porous, but strong scaffold remained.

Thermoresponsive hyperbranched copolymer with multi acrylate functionality for in situ cross-linkable hyaluronic acid composite semi-IPN hydrogel

Thermoresponsive polymers have been widely used for in situ formed hydrogels in drug delivery and tissue engineering as they are easy to handle and their shape can easily conform to tissue defects. However, non-covalent bonding and mechanical weakness of these hydrogels limit their applications. In this study, a physically and chemically in situ cross-linkable hydrogel system was developed from a novel thermoresponsive hyperbranched PEG based copolymer with multi acrylate functionality, which was synthesized via an 'one pot and one step' in situ deactivation enhanced atom transfer radical co-polymerization of poly(ethylene glycol) diacrylate (PEGDA, M(n) = 258 g mol(-1)), poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M(n )= 475 g mol(-1)) and (2-methoxyethoxy) ethyl methacrylate (MEO(2)MA). This hyperbranched copolymer was tailored to have the lower critical solution temperature to form physical gelation around 37°C. Meanwhile, with high level of acrylate functionalities, a chemically cross-linked gel was formed from this copolymer using thiol functional cross-linker of pentaerythritol tetrakis (3-mercaptopropionate) (QT) via thiol-ene Michael addition reaction. Furthermore, a semi-interpenetrated polymer networks (semi-IPN) structure was developed by combining this polymer with hyaluronic acid (HA), leading to an in situ cross-linkable hydrogel with significantly increased porosity, enhanced swelling behavior and improved cell adhesion and viability both in 2D and 3D cell culture models.

Founder's award to Antonios G. Mikos, Ph.D., 2011 Society for Biomaterials annual meeting and exposition, Orlando, Florida, April 13-16, 2011: Bones to biomaterials and back again--20 years of taking cues from nature to engineer synthetic polymer scaffolds

For biomaterials scientists focusing on tissue engineering applications, the gold standard material is healthy, autologous tissue. Ideal material properties and construct design parameters are thus both obvious and often times unachievable; additional considerations such as construct delivery and the underlying pathology necessitating new tissue yield additional design challenges with solutions that are not evident in nature. For the past nearly two decades, our laboratory and collaborators have aimed to develop both new biomaterials and a better understanding of the complex interplay between material and host tissue to facilitate bone and cartilage regeneration. Various approaches have ranged from mimicking native tissue material properties and architecture to developing systems for bioactive molecule delivery as soluble factors or bound directly to the biomaterial substrate. Such technologies have allowed others and us to design synthetic biomaterials incorporating increasing levels of complexity found in native tissues with promising advances made toward translational success. Recent work focuses on translation of these technologies in specific clinical situations through the use of adjunctive biomaterials designed to address existing pathologies or guide host-material integration.

Evaluation of dense polylactic acid/beta-tricalcium phosphate scaffolds for bone tissue engineering

Advances in biomaterial fabrication have introduced numerous innovations in designing scaffolds for bone tissue engineering. Often, the focus has been on fabricating scaffolds with high and interconnected porosity that would allow for cellular seeding and tissue ingrowth. However, such scaffolds typically lack the mechanical strength to sustain in vivo ambulatory stresses in models of load bearing cortical bone reconstruction. In this study, we investigated the microstructural and mechanical properties of dense PLA and PLA/beta-TCP (85:15) scaffolds fabricated using a rapid volume expansion phase separation technique, which embeds uncoated beta-TCP particles within the porous polymer. PLA scaffolds had a volumetric porosity in the range of 30 to 40%. With the embedding of beta-TCP mineral particles, the porosity of the scaffolds was reduced in half, whereas the ultimate compressive and torsional strength were significantly increased. We also investigated the properties of the scaffolds as delivery vehicles for growth factors in vitro and in vivo. The low-surface porosity resulted in sub optimal retention efficiency of the growth factors, and burst release kinetics reflecting surface coating rather than volumetric entrapment, regardless of the scaffold used. When loaded with BMP2 and VEGF and implanted in the quadriceps muscle, PLA/beta-TCP scaffolds did not induce ectopic mineralization but induced a significant 1.8-fold increase in neo vessel formation. In conclusion, dense PLA/beta-TCP scaffolds can be engineered with enhanced mechanical properties and potentially be exploited for localized therapeutic factor delivery.

Bone induction by biomimetic PLGA-(PEG-ASP)n copolymer loaded with a novel synthetic BMP-2-related peptide in vitro and in vivo

BMP-2 is one of the most important growth factors of bone regeneration. Polylactide-co-glycolic acid (PLGA), which is used as a biodegradable scaffold for delivering therapeutic agents, has been intensively investigated. In previous studies, we synthesized a novel BMP-2-related peptide (designated P24) and found that it could enhance the osteoblastic differentiation of bone marrow stromal cells (BMSCs). The objective of this study was to construct a biomimetic composite by incorporating P24 into a modified PLGA-(PEG-ASP)n copolymer to promote bone formation. In vitro, our results demonstrated that PLGA-(PEG-ASP)n scaffolds were shown to be an efficient system for sustained release of P24. Significantly more BMSCs attached to the P24/PLGA-(PEG-ASP)n and PLGA-(PEG-ASP)n membranes than to PLGA, and the cells in the two groups subsequently proliferated more vigorously than those in the PLGA group. The expression of osteogenic markers in P24/PLGA-(PEG-ASP)n group was stronger than that in the PLGA-(PEG-ASP)n and PLGA groups. Radiographic and histological examination, Western blotting and RT-PCR showed that P24/PLGA-(PEG-ASP)n scaffold could induce more effective ectopic bone formation in vivo, as compared with PLGA-(PEG-ASP)n or gelatin sponge alone. It is concluded that the PLGA-(PEG-ASP)n copolymer is a good P24 carrier and can serve as a good scaffold for controlled release of P24. This novel P24/PLGA-(PEG-ASP)n composite promises to be an excellent biomaterial for inducing bone regeneration.

Three-dimensional porous biodegradable polymeric scaffolds fabricated with biodegradable hydrogel porogens

We have developed a new fabrication technique to create three-dimensional (3D) porous poly(epsilon-caprolactone fumarate) (PCLF) scaffolds using hydrogel microparticle porogens, as an alternative to overcome certain limitations of traditional scaffold fabrication techniques such as a salt leaching method. Both natural hydrogel, gelatin, and synthetic hydrogel, poly(ethylene glycol) sebacic acid diacrylate, were used as porogens to fabricate 3D porous PCLF scaffolds. Hydrogel microparticles were prepared by a single emulsion technique with the particle size in the range of 100-500 microm after equilibrium in water. The pore size distribution, porosity, pore interconnectivity, and spatial pore heterogeneity of the 3D PCLF scaffolds were assessed using micro-computed tomography and imaging analysis. Scaffolds fabricated with the hydrogel porogens had higher porosity and pore interconnectivity as well as more homogeneous spatial pore distribution, compared to the scaffolds made from the salt leaching process. Compressive moduli of the scaffolds were also measured and showed that lower porosity yielded greater modulus of the scaffolds. Overall, the new fabrication technology using hydrogel porogens may be beneficial for certain tissue engineering applications.

Triggered instability of liposomes bound to hydrophobically modified core-shell PNIPAM hydrogel beads

The ability to trigger a destabilization of the membrane integrity of liposomes bound to environmentally sensitive hydrophobically modified core-shell hydrogel beads is demonstrated. Hydrogel beads with a core composed of poly(N-isopropylacrylamide) lightly cross-linked with bisacrylamide (BA) (pNIPAM) and a shell composed of NIPAM highly cross-linked with BA and containing varying amounts of acrylic acid (AA) [p(NIPAM-co-AA)] undergo a volume phase transition (VPT) at approximately 32 degrees C, as determined from (1)H magic angle spinning (MAS) NMR, regardless of the AA content of the shell. When the shell was hydrophobically modified with either decylamine or tetradecylamine, binding of extruded large unilamellar vesicles (eLUVs) composed of 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) was quantitative, as determined via fluorescence spectroscopy. Fluorescence microscopy showed that such bound eLUVs did not fuse. Hydrogel-bound eLUV membrane permeability was assessed using (31)P MAS NMR in the presence of the chemical shift agent praseodymium and demonstrated that only at lower degrees of hydrophobic modification of the core-shell hydrogels was eLUV membrane barrier integrity maintained when T < VPT. At a low degree of hydrophobic modification, cycling the temperature above the VPT even for short periods caused the eLUV membranes to become leaky. Hence, eLUV membrane permeability was coupled to the hydrogel VPT, a situation that would be useful in applications requiring triggered release of liposomal contents.

Controlled growth factor delivery for tissue engineering

Growth factors play a crucial role in information transfer between cells and their microenvironment in tissue engineering and regeneration. They initiate their action by binding to specific receptors on the surface of target cells and the chemical identity, concentration, duration, and context of these growth factors contain information that dictates cell fate. Hence, the importance of exogenous delivery of these molecules in tissue engineering is unsurprising, considering their importance for tissue regeneration. However, the short half-lives of growth factors, their relatively large size, slow tissue penetration, and their potential toxicity at high systemic levels, suggest that conventional routes of administration are unlikely to be effective. In this review, we provide an overview of the design criteria for growth factor delivery vehicles with respect to the growth factor itself and the microenvironment for delivery. We discuss various methodologies that could be adopted to achieve this localized delivery, and strategies using polymers as delivery vehicles in particular.

Synthesis of poly(propylene fumarate)

This protocol describes the synthesis of 500-4,000 Da poly(propylene fumarate) (PPF) by a two-step reaction of diethyl fumarate and propylene glycol through a bis(hydroxypropyl) fumarate diester intermediate. Purified PPF can be covalently cross-linked to form degradable polymer networks, which have been widely explored for biomedical applications. The properties of cross-linked PPF networks depend upon the molecular properties of the constituent polymer, such as the molecular weight. The purity of the reactants and the exclusion of water from the reaction system are of utmost importance in the generation of high-molecular-weight PPF products. Additionally, the reaction time and temperature influence the molecular weight of the PPF product. The expected time required to complete this protocol is 3 d.

Human extracellular matrix (ECM) powders for injectable cell delivery and adipose tissue engineering

Here, we present extracellular matrix (ECM) powders derived from human adipose tissue as injectable cell delivery carriers for adipose tissue engineering. We postulate that human adipose tissue may provide an ideal biomaterial because it contains large amounts of ECM components including collagen. Fresh human adipose tissue was obtained by a simple surgical operation (liposuction). After removing blood and oil components, the tissue was homogenized, centrifuged, freeze-dried, and ground to powders by milling. In an in vitro study, the human ECM powders were highly effective for promotion of cell attachment and proliferation for three-dimensional (3D) cell culture. In in vivo studies, suspensions of human ECM powders containing human adipose-derived stem cells (hASCs) were subcutaneously injected into nude mice. At eight weeks post-injection, numerous blood vessels were observed and the newly formed tissue exhibited adipogenesis with accumulated intracellular small lipid droplets. Overall, the grafts showed well-organized adipose tissue constructs without any signs of tissue necrosis, cystic spaces, or fibrosis. We believe that human ECM powders could act as efficient injectable biomaterials for tissue engineering and have great potential for meeting clinical challenges in regenerative medicine, particularly in relation to adipose tissue engineering.

TP508 (Chrysalin) reverses endothelial dysfunction and increases perfusion and myocardial function in hearts with chronic ischemia

Endothelial dysfunction (ED) is characterized by impaired nitric oxide (NO) signaling, decreased NO-dependent vasodilatation, increased vascular inflammation, and diminished response to angiogenic factors. TP508 (Chrysalin), an angiogenic tissue repair peptide, was tested for potential effects on myocardial revascularization and ED using a porcine model of chronic myocardial ischemia. TP508 increased perfusion in ischemic regions up to16-fold (P < .02) and doubled myocardial wall thickening (P < .02) relative to placebo controls. Ischemic arterioles exhibited impaired NO-mediated vasodilation and diminished NO production. TP508 reversed ischemic effects, increasing NO-mediated vasodilation (P < .05), endothelial nitric oxide synthase (eNOS) expression, and NO production. In human endothelial cells, TP508 stimulated eNOS activation (1.84 +/- 0.2-fold; P < .02), increased NO production (85 +/- 18%; P < .02), and prevented hypoxia-induced eNOS downregulation (P < .01). Thus, TP508 reverses ED both in porcine ischemic hearts and cultured human endothelial cells. These results suggest potential therapeutic benefit of TP508 in myocardial revascularization and treatment of ED-related diseases.

2007 AIChE Alpha Chi Sigma Award: From Material to Tissue: Biomaterial Development, Scaffold Fabrication, and Tissue Engineering

The need for techniques to facilitate the regeneration of failing or destroyed tissues remains great with the aging of the worldwide population and the continued incidence of trauma and diseases such as cancer. A 16-year history in biomaterial scaffold development and tissue engineering is examined, beginning with the synthesis of novel materials and fabrication of 3D porous scaffolds. Exploring cell-scaffold interactions and subsequently cellular delivery using biomaterial carriers, we have developed a variety of techniques for bone and cartilage engineering. In addition to delivering cells, we have utilized growth factors, DNA, and peptides to improve the in vitro and in vivo regeneration of tissues. This review covers important developments and discoveries within our laboratory, and the increasing breadth in the scope of our work within the expanding field of tissue engineering is presented.

PEG-derivative effectively modifies the characteristics of indomethacin-PLGA microspheres destined to intra-articular administration

The aim of this study was to obtain biodegradable indomethacin microspheres for intra-articular administration in rheumatoid arthritis, where angiogenic processes are involved. Indomethacin concentrations to achieve an anti-angiogenic effect would be five-times higher than an anti-inflammatory. Microspheres were prepared by solvent evaporation using PLGA. Indomethacin is a poor water-soluble drug with it being possible that dissolved and non-dissolved drug co-exist within the polymeric matrix resulting in rapid release. To control this release, an oil-PEG-derivative was incorporated, producing changes in morphology, crystallinity and indomethacin release. To minimize the amount of microspheres administered, a two-factor five-level central rotable composite 2(2)+star design was employed with two independent variables: indomethacin percentage and PEG-derivative percentage. The optimum formulation showed mean encapsulation efficiency of 94.3+/-2.2% and released 7.99+/-0.25 microg indomethacin/day/mg microspheres for 21 days. A dose of 20-50 mg of this formulation could be appropriate to achieve both anti-angiogenic and anti-inflammatory effects. Preliminary cytotoxicity studies performed in rat splenocytes showed an adequate cell viability.

Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds

Understanding cell behavior inside complex, three-dimensional (3D) microenvironments with controlled spatiotemporal patterning of physical and biochemical factors would provide significant insights into the basic biology of organ development and tissue functions. One of the fundamental limitations in studying such behavior has been the inability to create patterned microenvironments within 3D scaffold structures. Here a simple, layer-by-layer stereolithography (SL) method that can precisely pattern ligands, extracellular-matrix (ECM) components, and growth factors, as well as controlled release particles inside a single scaffold, has been developed. The process also allows fabrication of predesigned internal architectures and porosities. Photocrosslinkable poly(ethylene glycol) dimethacrylate (PEGDMA) was used as the basic structural component of these microfabricated scaffolds. PEG acrylates, covalently modified with the cell adhesive peptide arginine-glycine-aspartic acid (RGD) or the ECM component heparan sulfate, was incorporated within the scaffolds to facilitate cell attachment and to allow spatial sequestration of heparan-binding growth factors. Fluorescently labeled polymer microparticles and basic fibroblast growth factor (FGF-2) were chosen to illustrate the capability of SL to spatiotemporally pattern scaffolds. The results demonstrate that a precise, predesigned distribution of single or multiple factors within a single 3D structure can be created, and specific internal architectures can be fabricated. Functionalization of these scaffolds with RGD is demonstrated, and heparan sulfate allows efficient cell attachment and spatial localization of growth factors. Such patterned scaffolds might provide effective systems to study cell behavior in complex microenvironments and could eventually lead to engineering of complex, hybrid tissue structures through predesigned, multilineage differentiation of a single stem-cell population.

Bioengineering approaches to controlled protein delivery

Proteins are of crucial importance in all biologic organisms, in terms of both structure and function. Their deficits play central roles in many pathologic states, and their potential as powerful therapeutic agents has been widely recognized. Many issues, however, exist in delivery of biologically active proteins to target tissues and organs. Recent advances in biomedical engineering have lead to development of advanced techniques for controlled delivery of peptides and proteins, paving the way for their efficient use in treating human injury and disease. With a particular emphasis on most recent advances, this review discusses currently available techniques for controlled delivery of proteins and considers future research directions.

Local injection of thrombin-related peptide (TP508) in PPF/PLGA microparticles-enhanced bone formation during distraction osteogenesis

We have previously demonstrated that injections of the thrombin-related peptide, TP508, into the lengthening gap have significantly enhanced bone consolidation in a rabbit model of distraction osteogenesis. This study was to further test the effect of a single TP508 injection in slow release preparation on bone formation during distraction osteogenesis. Rabbits had left tibiae lengthened unilateral lengthener at rate of 1.4 mm/day for 6 days. TP508 was injected into as the following: Group 1, TP508 in saline; Group 2, in PPF/PLGA [poly(propylene fumarate)/poly(D,L-lactic-co-glycolic acid)] microparticles; and Group 3, dextran gel only. All the animals were killed 2 weeks after lengthening. On radiographies, more bone was formed in the two TP508-treated groups at first and secnd week postlengthening than that of the control Group 3. Microcomputed tomography (microCT) at 2 weeks indicated that the most advanced bone formation and remodeling was seen in Group 2. The mean volumetric BMD of the regenerates was significantly higher in the TP508 treated groups compared to the control group (p < 0.05). Histological evaluations supported the radiographic and the microCT results. In conclusion, we have demonstrated that a single injection of small amount of TP508 (300 microg) at the end of lengthening phases has significantly enhanced bone consolidation process in a rabbit model of distraction osteogenesis. The delivery of TP508 in PPF/PLGA microparticles appears to lead to a better quality bone formation over the saline delivery, further examinations are needed to confirm if PPF/PLGA microparticles may be desirable drug delivery form in augmenting bone formation.

Materials in particulate form for tissue engineering. 2. Applications in bone

Materials in particulate form have been the subjects of intensive research in view of their use as drug delivery systems. While within this application there are still issues to be addressed, these systems are now being regarded as having a great potential for tissue engineering applications. Bone repair is a very demanding task, due to the specific characteristics of skeletal tissues, and the design of scaffolds for bone tissue engineering presents several difficulties. Materials in particulate form are now seen as a means of achieving higher control over parameters such as porosity, pore size, surface area and the mechanical properties of the scaffold. These materials also have the potential to incorporate biologically active molecules for release and to serve as carriers for cells. It is believed that the combination of these features would create a more efficient approach towards regeneration. This review focuses on the application of materials in particulate form for bone tissue engineering. A brief overview of bone biology and the healing process is also provided in order to place the application in its broader context. An original compilation of molecules with a documented role in bone tissue biology is listed, as they have the potential to be used in bone tissue engineering strategies. To sum up this review, examples of works addressing the above aspects are presented.

Guest aggregation within poly(L-lactic acid)/pluronic P104 thin films

Rhodamine 6G (R6G) doped thin films composed of poly(L-lactic acid) (PLLA) and Pluronic P104 were spin cast onto glass microscope slides and characterized by ultraviolet-visible, steady-state, and time-resolved fluorescence spectroscopy. The results show that R6G aggregation within the film increases as the R6G concentration and P104 loading increases. These results suggest an approach for studying drug distributions (monomers, aggregates) within biodegradable polymer formulations.

Synthesis and Characterization of Biodegradable Networks Providing Saturated-Solution Prolonged Delivery

Numerous peptide drugs require continuous and local delivery to obtain optimum therapeutic effect. Herein, we describe the incorporation of a model peptide drug, vitamin B12, as well as goserelin acetate, in biodegradable elastomer cylinders through photo-cross-linking. The elastomer was prepared from acrylated star-poly(epsilon-caprolactone-co-D,L-lactide). Release was manipulated through the incorporation of poly(ethylene glycol) diacrylate (PEGD) into the network at concentrations up to 30% (w/w). The PEGD in the network caused rapid swelling that remained constant throughout the release period. The degree of swelling was low, ranging from 10 to 45% (w/w), and increasing as the PEGD content increased. Release proceeded with a minimal initial burst, and extended periods of nearly constant release, ranging from approximately 5 to 70% mass fraction released, were obtained. The release rate was independent of particle size and increased as the cylinder diameter decreased, as the amount of PEGD increased, as the molecular weight of PEGD increased, and as the agent loading increased. Moreover, goserelin acetate, which has a comparable diffusivity but greater aqueous solubility, was released at a greater rate than vitamin B12. This release behavior is explained as a balance between agent dissolution in the swollen polymer matrix and diffusion through the polymer matrix bulk.

Aligned core-shell nanofibers delivering bioactive proteins

AIMS

Continuous nanostructures embedded with proteins may synergistically present topographical and biochemical signals to cells for tissue engineering applications. This study presents the co-axial electrospinning of aligned poly(epsilon-caprolactone) nanofibers encapsulated with bovine serum albumin and platelet-derived growth factor-bb for demonstration of controlled release and bioactivity retention, respectively.

MATERIALS & METHODS

Controllable release kinetics is achieved by incorporation of poly(ethylene glycol) as a porogen in the shell of the nanofibers.

RESULTS & DISCUSSION

Poly(ethylene glycol) leaches out in a concentration- and molecular weight-dependent fashion, leading to bovine serum albumin release half-lives that range from 1 to 20 days. Optimized platelet-derived growth factor-bb-encapsulated nanofibers can completely release the protein with near zero-order kinetics and preserved bioactivity.

CONCLUSION

Co-axial electrospinning is shown to be a versatile technique in achieving the delivery of biochemical signals in a controlled manner for regenerative medicine applications.