Evaluation of the effects of fat replacers on the quality of wheat bread

Technological Properties of Inulin-Enriched Doughs and Breads, Influence on Short-Term Storage and Glycemic Response

The use of inulin in food is highly appreciated by consumers because of its prebiotic effect. In this study, the effects of increasing additions (5, 10 and 20%) of inulin as a substitute for wheat flour in bread production were investigated with regard to the physical, technological and rheological properties of the flour blends. Inulin reduced the water-binding capacity from 1.4 g/100 g with 0 flour to 0.80 g/100 g with the 20% inulin addition, while there were no statistical differences in the oil-binding capacity. The addition of inulin also influenced the yeast rates, especially in the samples with 5 and 10% addition. On the farinograph, inulin caused a reduction in water absorption (40.75 g/100 g with 20% inulin), an increase in dough development time (18.35 min with 10% inulin) and dough stability (13.10 min with 10% inulin). The mixograph showed a longer kneading time for the sample with 20% inulin (8.70 min) than for the control (4.61 min). In addition, there was an increase in dough firmness and tightness due to the addition of inulin (W: 203 × 10-4 J; P/L: 4.55 for the 20% inulin sample) compared with the control. The physical and technological properties of the loaves were evaluated at time 0 and after 4 days (T4). The addition of inulin reduced the volume of the bread while increasing the weight, albeit with a weight loss at T4 (compared to T0) of 4.8% for the 20% inulin and 14.7% for the control. The addition of inulin caused a darkening of the crust of the enriched bread, proportional to the increase in inulin content. In addition, the inulin content ranged from 0.82 g/100 g in the control to 14.42 g/100 g in the 20% inulin bread, while the predicted glycemic index ranged from 94.52 in the control to 89.39 in the 20% inulin bread. The available data suggest that the formulation with 5% inulin provides the highest performance.

Quality characteristics of cereal-based foods enriched with different degree of polymerization inulin: A review

Vegetables, cereals and fruit are foods rich in fibre with beneficial and nutritional effects as their consumption reduces the onset of degenerative diseases, especially cardiovascular ones. Among fibres, inulin, oligofructose or fructooligosaccharide (FOS) are the best-studied. Inulin is a generic term to cover all linear β(2-1) fructans, with a variable degree of polymerization. In this review a better understanding of the importance of the degree of polymerization of inulin as a dietary fibre, functions, health benefits, classifications, types and its applications in the food industry was considered in different fortified foods. Inulin has been used to increase the nutritional and healthy properties of the product as a sweetener and as a substitute for fats and carbohydrates, improving the nutritional value and decreasing the glycemic index, with the advantage of not compromising taste and consistency of the product. Bifidogenic and prebiotic effects of inulin have been well established, inulin-type fructans are fermented by the colon to produce short-chain fatty acids, with important local and systemic actions. Addition of inulin with different degrees of polymerization to daily foods for the production of fortified pasta and bread was reviewed, and the impact on sensorial, technological and organoleptic characteristics even of gluten-free bread was also reported.

Study the influence of waxy wheat flour, inulin and guar gum on quality and microstructure of Pita and Tandoori breads: response surface methodology aids functional food development

A diet high in dietary fibre (DF) is thought to help reduce cholesterol levels, may control blood glucose levels and reduces gut transit time. However, people often fail to consume the recommended quantity of DF. The aim of this study was to supplement two types of bread with some novel functional food ingredients; waxy wheat flour (WF), inulin (IN) and guar gum (GG) to develop products rich in DF. Response surface methodology (RSM) was employed to study the effect of DF on two different breads. Breads were assessed using Cryo-SEM for its microstructure pattern, and physical attributes (pita; springiness, chewiness and hardness, Tandoori; hardness and elasticity). The results showed that, for pita bread, the outcome showed that IN and GG alone significantly increased hardness and chewiness and decreased springiness. WF addition only decreased springiness. GG linearly increased pita height and volume, but it quadratically increased weight loss. Moreover, IN increased volume and height in a quadratic way. Regarding Tandoori bread, IN reduced bread toughness, but showed no effect on extensibility. WF alone increased volume and diameter. The microstructure also showed that the novel ingredients modified starch gelatinisation and gluten-starch matrix in both pita and Tandoori breads differently. Therefore, the influence of the three functional ingredients alone and in combinations influenced quality parameters dissimilarly.

Fat replacers in baked products: their impact on rheological properties and final product quality

Many baked products, except for bread, (i.e., cakes, cookies, laminated pastries, and so on) generally contain high levels of fat in their formulas and they require different bakery fats that impart product-specific quality characteristics through their functionalities. Even though, fat is crucial for baked product quality, strategies have been developed to replace fat in their formulas as high fat intake is associated with chronic diseases such as obesity, diabetes, and cardiovascular heart diseases. Besides, the solid bakery fats contain trans- and saturated fats, and their consumption has been shown to increase total and low-density lipoprotein cholesterol levels and to constitute a risk factor for cardiovascular diseases when consumed at elevated levels. Therefore, the aim of this review was to provide a detailed summary of the functionality of lipids/fats (endogenous lipids, surfactants, shortening) in different baked products, the rheological behavior of bakery fats and their contribution to baked product quality, the impact of different types of fat replacers (carbohydrate-, protein-, lipid-based) on dough/batter rheology, and on the quality characteristics of the resulting reduced-fat baked products.

Effect of micro-aeration on the mechanical behaviour of chocolates and implications for oral processing

Aeration in foods has been widely utilised in the food industry to develop novel foods with enhanced sensorial characteristics. Specifically, aeration at the micron-sized scale has a significant impact on the microstructure where micro-bubbles interact with the other microstructural features in chocolates. This study aims to determine the effect of micro-aeration on the mechanical properties of chocolate products, which are directly correlated with textural attributes such as hardness and crumbliness. Uniaxial compression tests were performed to determine the mechanical properties such as Poisson's ratio, Young's modulus and macroscopic yield strength together with fracture tests to estimate the fracture toughness. In vivo mastication tests were also conducted to investigate the link between the fracture properties and fragmentation during the first two chewing cycles. The uniaxial stress-strain data were used to calibrate a viscoplastic constitutive law. The results showed that micro-aeration significantly affects mechanical properties such as Young's modulus, yield and fracture stresses, as well as fracture toughness. In addition, it enhances the brittle nature of the chocolate, as evidenced by lower fracture stress but also lower fracture toughness leading to higher fragmentation, in agreement with observations in the in vivo mastication tests. As evidenced by the XRT images and the stress-strain measurements micro-aeration hinders the re-arrangement of the microscopic features inside the chocolate during the material's deformation. The work provides a new insight of the role of bubbles on the bulk behaviour of complex multiphase materials, such as chocolates, and defines the mechanical properties which are important input parameters for the development of oral processing simulations.

The Application of Pureed Butter Beans and a Combination of Inulin and Rebaudioside A for the Replacement of Fat and Sucrose in Sponge Cake: Sensory and Physicochemical Analysis

Determining minimum levels of fat and sucrose needed for the sensory acceptance of sponge cake while increasing the nutritional quality was the main objective of this study. Sponge cakes with 0, 25, 50 and 75% sucrose replacement (SR) using a combination of inulin and Rebaudioside A (Reb A) were prepared. Sensory acceptance testing (SAT) was carried out on samples. Following experimental results, four more samples were prepared where fat was replaced sequentially (0, 25, 50 and 75%) in sucrose-replaced sponge cakes using pureed butter beans (Pbb) as a replacer. Fat-replaced samples were investigated using sensory (hedonic and intensity) and physicochemical analysis. Texture liking and overall acceptability (OA) were the only hedonic sensory parameters significantly affected after a 50% SR in sponge cake (p < 0.05). A 25% SR had no significant impact on any hedonic sensory properties and samples were just as accepted as the control sucrose sample. A 30% SR was chosen for further experiments. After a 50% fat replacement (FR), no significant differences were found between 30% sucrose-replaced sponge cake samples in relation to all sensory (hedonic and intensity) parameters investigated. Flavour and aroma intensity attributes such as buttery and sweet and, subsequently, liking and OA of samples were negatively affected after a 75% FR (p < 0.05). Instrumental texture properties (hardness and chewiness (N)) did not discriminate between samples with increasing levels of FR using Pbb. Moisture content increased significantly with FR (p < 0.05). A simultaneous reduction in fat (42%) and sucrose was achieved (28%) in sponge cake samples without negatively affecting OA. Optimised samples contained significantly more dietary fibre (p < 0.05).

The Effect of Inulin on the Physical and Textural Properties of Biscuits Containing Jet Milled Barley Flour

The quality properties of biscuits with partial replacement of sugar by inulin (at 0, 10, 20 and 30%) and wheat flour by barley flour (at 0, 10, 20, 30 and 40%) were studied. A commercial and a jet milled finer barley flour were used. For all flour substitutions, elevated amounts of inulin led to increased weight and decreased spread ratio of the biscuits. Inulin biscuits, within the same flour composition, were softer than those with no inulin but inulin’s concentration was not statistically important. The incorporation of barley flour resulted in reduced lightness, more evident in the case of the finer barley flour. Inulin also affected the lightness of the biscuits. Phenolic content was affected by the presence of barley flour but no clear trend of inulin’s effect was detected. The interactions between barley substitution, inulin substitution and particle size of the barley flour were important for all studied properties, i.e., weight, spread ratio, hardness, total phenolic content and color.

Application of Complex Chitosan Hydrogels Added With Canola Oil in Partial Substitution of Cocoa Butter in Dark Chocolate

The complexation of polymeric materials can be an alternative to trapping oil in a physical network for formulating foods with reduced saturated fat content. In this research, we have evaluated the use of different polymer ratios of Sodium Alginate (ALG), Carrageenan predominance iota (CR1) and Carrageenan predominance kappa (CR2) complexed with Chitosan (CHI) at a fixed polymer concentration (2% w/v) to formulate complex hydrogels and assess their oil holding capacity. The objective was to determine the polymer ratios of CHI to anionic polysaccharides (75:25, 50:50, and 25:75), determining the oil retention capacity in different ratios, and how this can affect the stability, microstructure and rheology of to produce low saturated chocolate with trapped canola oil. The stability of the hydrogels was characterized, considering the water retention and retention of canola oil in polysaccharides complexes. The more stable system was the hydrogel CHI:CR2 in a polymer ratio of 25:75. This formulation, when added of 20% of canola oil presented an apparent viscosity of 0.631 Pa.s at 300 s−1, and its use as replacer of saturated fat allowed the production of dark chocolate with 16% reduction in fat content and 80% of added cocoa butter. Stability studies showed that polysaccharides complexes network can retain the edible oil in chocolate formulation for 60 days. It has been proven that polysaccharides complexes can be incorporated to partially replace the fatty phase in chocolates without considerable changes in relevant characteristics as consumer acceptance evaluated by sensory tests and rheological properties.

Effect of inulin on rheological, textural, and structural properties of brown wheat flour dough and in vitro digestibility of developed Arabic bread

The brown wheat flour (BWF)-based Arabic bread was fortified with chicory-derived inulin. The objective of this work was to assess the influence of the inulin concentration (1.25 to 5%) on the rheological, textural properties, and fermentation efficacy of enriched BWF dough. Farinographic measurement established that only 3.75% BWF can be substituted by inulin in a dough formulation, which resulted in lowering the water absorption capacity. The peak gelatinization temperature, T_p detected at 74.4 °C by rheometric measurement, which increased linearly with increasing the inulin concentration. The elastic modulus (G'), however, differed significantly among doughs with the addition of inulin. The dough hardness and compressibility increased as a function of inulin concentration. TPA measurement indicated that the Arabic bread fortified with 3.75% inulin was the best in texture. The addition of inulin improved the volume of CO₂ generation in the yeasted dough. The distribution of starch particles on the top layer of bread surface was visualized through SEM. In-vitro digestion and steady-flow measurement of the BWF/inulin bread digesta exhibited a slow digestion and an increment in the apparent viscosity against the control bread, which further confirmed potential health benefits of the developed Arabic bread. PRACTICAL APPLICATION: Arabic bread is a staple food in many Asian countries, and an incorporation of soluble fiber, like inulin, definitely improves its health benefits. This work optimized a formulation based on BWF and inulin with technical feasibility. Rheological and textural studies demonstrated that blend bread could be made by replacing 3.75% BWF by inulin with significantly lower water content. Inulin has replaced the sugar in the yeasted dough, and carried out the bread fermentation adequately.

Chemical stability of fructans in apple beverages and their influence on chronic constipation

The aim of this study was to analyse the concentration of reducing sugars in beverages based on apple juice with the addition of 2 and 4% of native and high polymerized inulin as well as oligofructose. Moreover, the effect of the consumption of this potentially prebiotic beverage containing highly polymerized inulin (12 g per 300 mL) on constipation was analysed. Pasteurization of the studied beverages followed by 120-day storage at ambient temperature, carried out in three independent trials, did not cause the hydrolysis of fructans into reducing sugars. Sensory analysis showed that the presence of fructans in beverages based on apple juice did not change the colour, clarity, odour, flavour, sweetness and acidity in comparison to apple juice. A placebo-controlled, randomized study involving 20 volunteers of age 20-29 with symptoms related to chronic constipation showed that the consumption of juice enriched with highly polymerized inulin significantly (p≤ 0.05) increased the frequency of bowel movements and facilitated defecation. The final conclusion is that fructans in beverages based on apple juice are chemically stable, do not affect sensory sensation and can help those with chronic constipation.

Physicochemical and sensory evaluation of biscuits enriched with chicory fiber

Nowadays, there has been increasing interest of using the chicory and its constituents in food production. The aim of this study was to compare physicochemical and sensory parameters of biscuits without (control) and with addition of 1, 3, and 5% of chicory fiber extract. The biscuits were subjected to physical (volume, maximum width, maximum height, aspect ratio at max. width, aspect ratio at max. height), chemical (dry matter content, crude protein, ash, fat, and crude fiber content), and sensory evaluation (flavor, chicory flavor (intensity), chicory flavor (presence), taste, chicory taste (presence), chicory taste (intensity), aftertaste, character of biscuit taste, overall acceptability). The volume, width, and height of biscuit increased after addition of chicory fiber extract and the highest values were obtained after enrichment with 5% of fiber extract. The crude protein content in biscuits increased from 6.76% (control) to 7.88% (5% of chicory fiber). Also the ash content increased from 0.68% (control) to 0.84% (5%) and the crude fiber content from 0.51% (control) to 0.56% (5%), respectively. Fat content was similar in all tested biscuit (∼24%). During the sensory evaluation, the highest scores were received with addition of 1 and 3% chicory fiber extract. We can recommend the application of chicory fiber in production of biscuits to improve nutritional (3 and 5% addition) and sensorial properties (1 and 3% addition) of this bakery product.

Wheat bread enriched with raspberry and strawberry oilcakes: effects on proximate composition, texture and water properties

Oilcakes from the oilseed industry are rich in dietary fibre and protein by-products. We assessed the impact of wheat flour replacement with raspberry and strawberry oilcakes on the proximate composition of bread, colour, texture and water behaviour. The substitution influenced the ash, fat and protein content causing an increase in the content of each of the analysed macronutrients. The crumb colour components (CIE L*a*b*) were shifted toward red while the saturation of yellow decreased. Texture analysis showed that the hardness and chewiness of crumb with oilcakes increased as well as springiness decreased. It was found that flour substitution with oilcakes limited significantly water transport and also influenced the molecular dynamics of water in the bread crumb. 1H NMR measurement results of relaxation times demonstrated that the free water in relation to the bound water in the examined systems depended on the amount of the flour replaced by the oilcake, as well as on the botanical origin of the oilcakes.

Interactions between polyols and wheat biopolymers in a bread model system fortified with inulin: A Fourier transform infrared study

One of the ways to improve food safety and reduce community health risks is fortification of these products with inulin. Inulin, in spite of the effects and nutritional benefits, will also have undesirable effects on the quality and shelf life of bread. In this study, the interactions between polyols as improvers (i.e. glycerol, sorbitol and propylene glycol) and major biopolymers of wheat flour (i.e. starch and gluten) were examined in model systems fortified with Serish inulin by Fourier transform infrared (FTIR) spectroscopy. The changes in starch structure were estimated focusing on the ratios of the heights of the bands at 1047 and 1022 cm^-1 which expresses the quantity of ordered starch to amorphous starch. At first and 5th days of storage, this ratio of control sample was higher than polyol treated samples. It was proved from Gaussian-Lorenzian curve fitting that the relative contribution of characteristic peaks of β-turns and intramolecular β-sheets was consecutively increased when polyol proportion of models increased. Whereas, content of intermolecular β-sheets and α-helix was slightly decreased with increasing of polyols in the models. Briefly, polyols especially 5% propylene glycol, could be used to reduce the undesirable effects of inulin on the quality parameters of dough and bread.

Production of wheat bread with spray-dried potato juice: Influence on dough and bread characteristics

Spray-dried potato juice, a raw material with pro-health properties that have already been described in recent literature, was used to substitute a part of wheat flour in bread. Bread was chosen based on its popularity. This paper is a report on the results of this substitution. Three levels of flour replacement were chosen - 2.5, 5.0 and 7.5% (with respect to the mass of flour). The influence of potato juice addition on some of the most important characteristics of wheat bread was determined. Mixes of wheat flour and spray-dried potato juice were analyzed for fermentative and pasting properties. Baked bread samples were analyzed for their texture, color, consumer acceptance and antioxidant activity. The substitution influenced the volume of the loaf as gasses were not retained by the underdeveloped gluten network. Spray-dried potato juice was also found to influence the pasting properties. The viscosity values (peak viscosity, trough and final viscosity) determined with the RVA device were increased in pastes obtained from raw material mixtures with spray-dried potato juice. These crumb also showed increased firmness and chewiness as well as decreased springiness in the performed texture profile analyses. Spray-dried potato juice was also found to impact the color of bread crumb to an extent noticeable to the human eye. The bread that contained spray-dried potato juice was darker than bread produced with sole wheat bread. The color components (CIE L*a*b*) were shifted toward red and yellow. The bread containing spray-dried potato juice was also significantly richer in antioxidant compounds than the control wheat bread. From the perspective of consumer acceptance, the introduction of larger amounts of spray-dried potato juice resulted in deterioration of the sensory quality. Nonetheless, the acceptance of bread with 2.5% of flour substituted with spray-dried potato juice did not differ significantly from the control.

Chicory syrup as a substitution of sugar in fine pastry

Fine pastry is a favorite snack but contains big amount fats and sugars. Sugar consumption is a major factor in the development of diabetes and obesity. Because of the growing interest in low-calorie alternatives to sucrose, producers react with different new products which can replace sugar and do not compromise the consumer acceptability of food products. This study deals with replacement of sugar with chicory oligofructose syrup, which provides same sweetness as sugar but contain over 70 % of fiber. Chicory syrup is composed of oligo-fructose and inulin. Inulin-type fructans are beneficial for immune and cardiovascular systems and its prebiotic function can protect colon health. In this study, the influence of sucrose (7 g.100g-1) replacement with chicory oligofructose syrup (0; 3.5; 7 g.100g-1) on the texture, specific loaf volume and sensory acceptability of biologically leavened muffins was tested. The substitution of sugar by the chicory syrup decreased specific loaf volume from 2.15 to 2.01 mL.g-1 while hardness, springiness and chewiness increased. There was no detrimental impact of syrup addition to cohesiveness of fine pastry muffin. It was observed that due to the syrup addition, pastry hardens faster, as showed results of hardnesss measured after 24 h. Bread crumb and crust sensory characteristics were not affected by the syrup addition. Weak impact of sugar replacement on sensory evaluation may be related to a reduced amount of the panelists involved in this study. More extensive study will, however, be performed to describe the impact of sugar replacement of fine biologically leavened muffins in more details. The results of this preliminary study shows, that the substitution of sugar by chicory syrup change textural properties and loaf volume. Despite all, based on sensory analysis the chicory syrup up to amount 7 g.100g-1 seems to be adequate for its use as a sugar replacer in fine pastry as biologically leavened muffins.

Sensory profile and evaluation of the degree of acceptability of bread produced with inulin and oligofructose

Abstract Homemade bread was produced with 4.4 and 4.45 g of total fructans per 50 g serving to meet Brazilian standards for prebiotic claims. The bread samples were characterized for their sensory profiles using descriptive analysis and for their sensory acceptability using hedonic and just-about-right scales for sweetness intensity. The sensory profiles of the breads were similar and sweetness was the term that discriminated the bread samples obtained, since the intensity decreased from the bread formulated with oligofructose/inulin to the bread formulated with inulin and finally to the standard bread formulation. Comparing the crust colour of the standard bread with the crust colour of the bread with inulin, the bread with inulin was more beige, while the bread with oligofructose/inulin had smaller bubbles and was not as soft. The bread with oligofructose/inulin had a higher degree of acceptability with respect to flavour and overall acceptability than the standard bread, but the bread with fructans was preferred as compared to the standard bread in terms of appearance, aroma, texture, flavour and overall acceptability. In conclusion, the addition of fructans to bread formulations is promising and may promote the elaboration and consumption of new prebiotic products in the bakery line.

Applications of prebiotics in food industry: A review

Benefits of prebiotics for stimulating a healthy intestinal tract are well known. From suppression of pathogens to proliferation of indigenous bacteria of intestines, prebiotics have it all. Since the research on the scope of prebiotics is expanding, new applications are coming up every day thus upgrading the choices consumer has for a healthy living. Incorporation of prebiotics in a wide range of products that food industry offers on shelf is an innovative way to replace fat and sugars along with enhancing the mouthfeel by providing better tongue lubrication. In some cases, the thermal stability of the product is improved along with other sensory, textural and physiological benefits. This paper gives an overview of the various prebiotics available from different sources and their applications in various segments of food industry, notably dairy, beverage, processed fruit-vegetable, bakery, confectionary, extruded snack, sweetener, infant formula, pet food and livestock industry. The effects observed on addition of various prebiotics are also elaborated.

Influence of the reformulation of ingredients in bakery products on healthy characteristics and acceptability of consumers

Bakery products are highly consumed by children and adults and as cereal-derived foods are considered a fundamental part of a balanced diet, but they are usually high in sugar and saturated and trans fat and low in fibre. This study aimed to develop four different bakery products (cookies, croissants, Spanish muffins and Spanish sponge cake) with healthier properties, such as lower fat and sugar content, healthy fatty acid profile and higher fibre content. Margarine and sunflower oil were replaced with high oleic sunflower oil, and inulin was also added. After the modifications, a significant reduction of fat content and kilocalories in all cases, an increment of monounsaturated fat and a decrease in saturated fatty acids in three products were observed. The sensory analysis resulted similar results in both recipes for cookies and lower acceptability in sponge cake, croissants and muffins. Purchase intention only decreased in sponge cake.

Serish inulin and wheat biopolymers interactions in model systems as a basis for understanding the impact of inulin on bread properties: a FTIR investigation

In this study the interactions between Serish root inulin and the main biopolymer types of wheat flour namely gluten, starch and phospholipid, were investigated in different model systems using Fourier transform infrared (FTIR) spectroscopy to unravel the underlying physical mechanism by which inulin impacts dough and bread properties. Interactions of inulin with starch and phospholipid were not considerable compared to gluten, but it was also clear that the modes of these interactions varied with the type and the amount of additives used in model formulation. This study revealed that when inulin is added to gluten, water redistribution promotes partial dehydration of gluten and collapse of β-spirals into intermolecular β-sheet structures; this trans-conformations might be due to physical reasons are believed to further impact the poor quality of bread containing added inulin. Upon performing Gaussian-Lorenzian curve fitting, it was observed that by adding of inulin to model systems, the relative contribution of characteristic peaks of β-turn and intramolecular β-sheet was progressively decreased whereas intermolecular β-sheet and α-helix contents were increased.

Sensory features and physical-chemical characterization of Brazilian honey bread with passion fruit peel flour

Purpose

– The purpose of this paper is to substitute wheat flour by passion fruit peel flour in Brazilian honey bread (pão de mel), with evaluation of the breads’ sensory features, chemical composition and physical properties.

Design/methodology/approach

– Honey breads with wheat flour (standard) and with replacement of this ingredient by 10 to 50 per cent passion fruit peel flour were produced. Two sensory tests were applied, to identify how different formulations with passion fruit peel flour were when compared to the standard formulation, and also the acceptability of the products. The selected honey breads, through sensory results, were evaluated regarding to chemical composition and physical properties.

Findings

– Formulations with 10 and 20 per cent substitution were the least different to formulations with only wheat flour, and were as acceptable as the wheat flour sample. Physical and chemical characteristics of breads with 10 and 20 per cent passion fruit peel flour were similar; however, honey bread with 20 per cent passion fruit peel flour had higher fibre content, ash quantity and hardness value; a lower specific volume; and a different colour from the wheat flour sample.

Practical implications

– This study offers an opportunity to food industries through utilization of an agro-industrial by-product on the formulation of a Brazilian traditional product.

Originality/value

– This study presents the feasibility of using an agro-industrial by-product to Brazilian honey bread, enhancing the nutritive value of this product and reducing the impact of passion fruit peel flour on the environment.

Characterization of fructan extracted from Eremurus spectabilis tubers: a comparative study on different technical conditions

The fructans, inulin and oligofructose, were known to possess many physiologic properties. In the present study, the Box-Behnken design was used to determine the optimum extraction conditions of fructan from Eremurus spectabilis root powder (Serish) with water extraction, direct and indirect ultrasound assisted extraction methods that gave the maximum yield. Sonication amplitude (20-100 %), sonication temperature (30-70 °C) and sonication time (5-40 min) were considered variables of direct and indirect ultrasound extractions while for conventional extraction the following variables were water to solid ratio (30-50 v/w), temperature (40-90 °C) and time (5-40 min). A second-order polynomial model was fitted to each response and the regression coefficients were determined using least square method. There was a good agreement between the experimental data and their predicted counterparts. In addition to establishing the difference of these extraction methods, the scanning electron microscopy, Fourier-transform infrared spectroscopy, zeta potential and particle size analysis have been shown to be useful tools to investigate, approximate and predict characteristics of extracted fructan. Moreover, comparison of conventional extraction, direct sonication extraction, indirect sonication extraction showed the indirect sonication extraction is a suitable method for fructan extraction.

Effects of fat replacement on properties of whole wheat bread

Bread characteristics are dependent upon the chemical composition and fiber content of the wheat flour used. A healthy diet can help prevent chronic diseases, where whole grains and fewer calories from fat are components of a healthy diet. The aims of this study were to determine the centesimal composition of wheat flour samples (whole, refined, and flour blends) along with their farinographic parameters (water absorption, development time and stability) and also to verify the specific volume, crumb texture profile and digital imaging of bread loaves made with 60% whole wheat flour and 3% fat or fat replacer. Increasing the whole wheat flour percentage in the blends also increased levels of protein, ash and insoluble fiber. All the farinographic parameters were also increased. Enzymatically modified starch was found to be an effective fat replacer in whole wheat loaves. The loaves made using fat replacer had the same specific volume and higher cell density as those made with fat, but exhibited different texture profile parameters such as higher hardness value and lower springiness value.

Improvement of gluten-free bread properties by the incorporation of bovine plasma proteins and different saccharides into the matrix

The aim of this work was to improve the quality of gluten-free bread, incorporating plasma bovine proteins concentrated by ultrafiltration and freeze-dried with saccharides (inulin and sucrose). The influence of these compounds on textural properties and final bread quality was assessed. The textural studies revealed that with the addition of proteins and inulin, homogeneous and smaller air cells were achieved improving the textural properties while the bread hardness was comparable with breads with gluten. The volume of gluten-free breads increased with increasing proteins and inulin concentrations, reaching a maximum at a protein concentration of 3.5% (w/w). The addition of the enhancers improved moisture retention of the loaves after cooking and an increase of lightness of crumb with respect to the control was observed. The sensory analysis found no statistically significant difference in sensory attributes evaluated with respect to the control, so these ingredients do not negatively affect the organoleptic properties of bread.

Bread Staling: Updating the View

Staling of bread is cause of significant product waste in the world. We reviewed the literature of the last 10 y with the aim to give an up-to-date overview on processing/storage parameters, antistaling ingredients, sourdough technology, and measurement methods of the staling phenomenon. Many researchers have been focusing their interest on the selection of ingredients able to retard staling, mainly hydrocolloids, waxy wheat flours (WWF), and enzymes, but different efforts have been made to understand the molecular basis of bread staling with the help of various measurement methods. Results obtained confirm the central role of amylopectin retrogradation and water redistribution within the different polymers in determining bread staling, but highlighted also the importance of other flour constituents, such as proteins and nonstarch polysaccharides. Data obtained with thermal, spectroscopy, nuclear magnetic resonance, X-ray crystallography, and colorimetry analysis have pointed out the need to encourage the use of one or more of these techniques in order to better understand the mechanisms of staling. Results so far obtained have provided new insight on bread staling, but the phenomenon has not been fully elucidated so far.