A tightly regulated high level expression vector that utilizes a thermosensitive lac repressor: production of the human T cell receptor V beta 5.3 in Escherichia coli

Standardization of regulatory nodes for engineering heterologous gene expression: a feasibility study

The potential of LacI/Ptrc , XylS/Pm , AlkS/PalkB , CprK/PDB3 and ChnR/PchnB regulatory nodes, recruited from both Gram-negative and Gram-positive bacteria, as the source of parts for formatting expression cargoes following the Standard European Vector Architecture (SEVA) has been examined. The five expression devices, which cover most known regulatory configurations in bacteria were assembled within exactly the same plasmid backbone and bearing the different functional segments arrayed in an invariable DNA scaffold. Their performance was then analysed in an Escherichia coli strain of reference through the readout of a fluorescence reporter gene that contained strictly identical translation signal elements. This approach allowed us to describe and compare the cognate expression systems with quantitative detail. The constructs under scrutiny diverged considerably in their capacity, expression noise, inducibility and ON/OFF ratios. Inspection of such a variance exposed the different constraints that rule the optimal arrangement of functional DNA segments in each case. The data highlighted also the ease of standardizing inducer-responsive devices subject to transcriptional activation as compared to counterparts based on repressors. The study resulted in a defined collection of formatted expression cargoes lacking any cross talk while offering a panoply of choices to potential users and help interoperability of the specific constructs.

Three Ribosomal Operons of Escherichia coli Contain Genes Encoding Small RNAs That Interact With Hfq and CsrA in vitro

Three out of the seven ribosomal RNA operons in Escherichia coli end in dual terminator structures. Between the two terminators of each operon is a short sequence that we report here to be an sRNA gene, transcribed as part of the ribosomal RNA primary transcript by read-through of the first terminator. The sRNA genes (rrA, rrB and rrF) from the three operons (rrnA, rrnB and rrnD) are more than 98% identical, and pull-down experiments show that their transcripts interact with Hfq and CsrA. Deletion of rrA, B, F, as well as overexpression of rrB, only modestly affect known CsrA-regulated phenotypes like biofilm formation, pgaA translation and glgC translation, and the role of the sRNAs in vivo may not yet be fully understood. Since RrA, B, F are short-lived and transcribed along with the ribosomal RNA components, their concentration reflect growth-rate regulation at the ribosomal RNA promoters and they could function to fine-tune other growth-phase-dependent processes in the cell. The primary and secondary structure of these small RNAs are conserved among species belonging to different genera of Enterobacteriales.

Thermoinducible expression system for producing recombinant proteins in Escherichia coli: advances and insights

Recombinant protein (RP) production from Escherichia coli has been extensively studied to find strategies for increasing product yields. The thermoinducible expression system is commonly employed at the industrial level to produce various RPs which avoids the addition of chemical inducers, thus minimizing contamination risks. Multiple aspects of the molecular origin and biotechnological uses of its regulatory elements (pL/pR promoters and cI857 thermolabile repressor) derived from bacteriophage λ provide knowledge to improve the bioprocesses using this system. Here, we discuss the main aspects of the potential use of the λpL/pR-cI857 thermoinducible system for RP production in E. coli, focusing on the approaches of investigations that have contributed to the advancement of this expression system. Metabolic and physiological changes that occur in the host cells caused by heat stress and by RP overproduction are also described. Therefore, the current scenario and the future applications of systems that use heat to induce RP production is discussed to understand the relationship between the activation of the bacterial heat shock response, RP accumulation, and its possible aggregation to form inclusion bodies.

Dimeric and Trimeric Fusion Proteins Generated with Fimbrial Adhesins of Uropathogenic Escherichia coli

Urinary tract infections (UTIs) are associated with high rates of morbidity and mortality worldwide, and uropathogenic Escherichia coli (UPEC) is the main etiologic agent. Fimbriae assembled on the bacterial surface are essential for adhesion to the urinary tract epithelium. In this study, the FimH, CsgA, and PapG adhesins were fused to generate biomolecules for use as potential target vaccines against UTIs. The fusion protein design was generated using bioinformatics tools, and template fusion gene sequences were synthesized by GenScript in the following order fimH-csgA-papG-fimH-csgA (fcpfc) linked to the nucleotide sequence encoding the [EAAAK]₅ peptide. Monomeric (fimH, csgA, and papG), dimeric (fimH-csgA), and trimeric (fimH-csgA-papG) genes were cloned into the pLATE31 expression vector and generated products of 1040, 539, 1139, 1442, and 2444 bp, respectively. Fusion protein expression in BL21 E. coli was induced with 1 mM IPTG, and His-tagged proteins were purified under denaturing conditions and refolded by dialysis using C-buffer. Coomassie blue-stained SDS-PAGE gels and Western blot analysis revealed bands of 29.5, 11.9, 33.9, 44.9, and 82.1 kDa, corresponding to FimH, CsgA, PapG, FC, and FCP proteins, respectively. Mass spectrometry analysis by MALDI-TOF/TOF revealed specific peptides that confirmed the fusion protein structures. Dynamic light scattering analysis revealed the polydispersed state of the fusion proteins. FimH, CsgA, and PapG stimulated the release of 372–398 pg/mL IL-6; interestingly, FC and FCP stimulated the release of 464.79 pg/mL (p ≤ 0.018) and 521.24 pg/mL (p ≤ 0.002) IL-6, respectively. In addition, FC and FCP stimulated the release of 398.52 pg/mL (p ≤ 0.001) and 450.40 pg/mL (p ≤ 0.002) IL-8, respectively. High levels of IgA and IgG antibodies in human sera reacted against the fusion proteins, and under identical conditions, low levels of IgA and IgG antibodies were detected in human urine. Rabbit polyclonal antibodies generated against FimH, CsgA, PapG, FC, and FCP blocked the adhesion of E. coli strain CFT073 to HTB5 bladder cells. In conclusion, the FC and FCP proteins were highly stable, demonstrated antigenic properties, and induced cytokine release (IL-6 and IL-8); furthermore, antibodies generated against these proteins showed protection against bacterial adhesion.

How to achieve high-level expression of microbial enzymes: strategies and perspectives

Microbial enzymes have been used in a large number of fields, such as chemical, agricultural and biopharmaceutical industries. The enzyme production rate and yield are the main factors to consider when choosing the appropriate expression system for the production of recombinant proteins. Recombinant enzymes have been expressed in bacteria (e.g., Escherichia coli, Bacillus and lactic acid bacteria), filamentous fungi (e.g., Aspergillus) and yeasts (e.g., Pichia pastoris). The favorable and very advantageous characteristics of these species have resulted in an increasing number of biotechnological applications. Bacterial hosts (e.g., E. coli) can be used to quickly and easily overexpress recombinant enzymes; however, bacterial systems cannot express very large proteins and proteins that require post-translational modifications. The main bacterial expression hosts, with the exception of lactic acid bacteria and filamentous fungi, can produce several toxins which are not compatible with the expression of recombinant enzymes in food and drugs. However, due to the multiplicity of the physiological impacts arising from high-level expression of genes encoding the enzymes and expression hosts, the goal of overproduction can hardly be achieved, and therefore, the yield of recombinant enzymes is limited. In this review, the recent strategies used for the high-level expression of microbial enzymes in the hosts mentioned above are summarized and the prospects are also discussed. We hope this review will contribute to the development of the enzyme-related research field.

Industrial production of recombinant therapeutics in Escherichia coli and its recent advancements

Nearly 30% of currently approved recombinant therapeutic proteins are produced in Escherichia coli. Due to its well-characterized genetics, rapid growth and high-yield production, E. coli has been a preferred choice and a workhorse for expression of non-glycosylated proteins in the biotech industry. There is a wealth of knowledge and comprehensive tools for E. coli systems, such as expression vectors, production strains, protein folding and fermentation technologies, that are well tailored for industrial applications. Advancement of the systems continues to meet the current industry needs, which are best illustrated by the recent drug approval of E. coli produced antibody fragments and Fc-fusion proteins by the FDA. Even more, recent progress in expression of complex proteins such as full-length aglycosylated antibodies, novel strain engineering, bacterial N-glycosylation and cell-free systems further suggests that complex proteins and humanized glycoproteins may be produced in E. coli in large quantities. This review summarizes the current technology used for commercial production of recombinant therapeutics in E. coli and recent advances that can potentially expand the use of this system toward more sophisticated protein therapeutics.

The new pLAI (lux regulon based auto-inducible) expression system for recombinant protein production in Escherichia coli

Background

After many years of intensive research, it is generally assumed that no universal expression system can exist for high-level production of a given recombinant protein. Among the different expression systems, the inducible systems are the most popular for their tight regulation. However, induction is in many cases less favorable due to the high cost and/or toxicity of inducers, incompatibilities with industrial scale-up or detrimental growth conditions. Expression systems using autoinduction (or self-induction) prove to be extremely versatile allowing growth and induction of recombinant proteins without the need to monitor cell density or add inducer. Unfortunately, almost all the actual auto inducible expression systems need endogenous or induced metabolic changes during the growth to trigger induction, both frequently linked to detrimental condition to cell growth. In this context, we use a simple modular approach for a cell density-based genetic regulation in order to assemble an autoinducible recombinant protein expression system in E. coli.

Result

The newly designed pLAI expression system places the expression of recombinant proteins in Escherichia coli under control of the regulatory genes of the lux regulon of Vibrio fischeri's Quorum Sensing (QS) system.

The pLAI system allows a tight regulation of the recombinant gene allowing a negligible basal expression and expression only at high cell density. Sequence optimization of regulative genes of QS of V. fischeri for expression in E. coli upgraded the system to high level expression. Moreover, partition of regulative genes between the plasmid and the host genome and introduction of a molecular safety lock permitted tighter control of gene expression.

Conclusion

Coupling gene expression to cell density using cell-to-cell communication provides a promising approach for recombinant protein production. The system allows the control of expression of the target recombinant gene independently from external inducers or drastic changes in metabolic conditions and enabling tight regulation of expression.

Heterologous protein production in Escherichia coli using the propionate-inducible pPro system by conventional and auto-induction methods

We examined expression of two plant genes encoding coclaurine N-methyltransferase (CMT) and norcoclaurine synthase (NCS) in Escherichia coli from the Salmonella entericaprpBCDE promoter (P(prpB)) and compared it to that from the strongest IPTG-inducible promoter, P(T7). In contrast to our previous study showing slightly higher production of green fluorescent protein (GFP) from the pPro system compared to that from the T7 system, production of two plant proteins CMT and NCS from P(prpB) was 2- to 4-fold higher than that from P(T7). Unlike P(T7), expression from P(prpB) did not reduce cell growth even when highly induced, indicating that this propionate-inducible system is more efficient for overproduction of proteins that result in growth inhibition. In an auto-induction experiment, which does not require monitoring the culture or adding inducer during cell growth, the pPro system exhibited much higher protein production than the T7 system. These results strongly indicate that the pPro system is well-suited for overproduction of recombinant proteins.

Construction and characterization of thermo-inducible vectors derived from heat-sensitive lacI genes in combination with the T7 A1 promoter

The lack of stringency and the cost of induction are two major disadvantages of using lac-derived vectors for recombinant protein productions. To compensate for these drawbacks, a series of thermo-inducible vectors was developed by coupling heat-sensitive lacI (lacIts) with the T7 A1 promoter on a multiple-copynumber plasmid. The lacIts genes were created by the introduction of Gly187-->Ser substitution along with three alternative mutation sites, Leu233-->Lys, Ala241-->Thr, and Gly265-->Asp, generated by site-directed mutagenesis into the wild-type lacI gene. With the LacZ production as a model, the induction profiles for various vectors containing distinct lacIts exhibited a positive trend as the temperature increased. The fully induced level was achieved by applying the temperature shift from 30 degrees C to 42, 40, or 37 degrees C to the cells harboring the plasmid with the Gly187-->Ser, Ala241-->Thr, or Gly265-->Asp substitution in lacI, respectively. As a result, it produced the maximal LacZ production ranging between 46,000 and 54,000 Miller units, corresponding to a 100- to 400-fold amplification over the uninduced level. As a whole, these novel expression vectors are characterized as having tight regulation and facile inducibility, and their practical usefulness in industrial production of recombinant proteins appears promising.

High-level bacterial secretion of single-chain alphabeta T-cell receptors

While numerous antibody-antigen systems have been structurally characterized, studies of structurally analogous T-cell receptor MHC systems have lagged behind largely due to the lack of a general TCR expression system. Efforts to develop bacterial systems have resulted in low yields (< 0.5 mg/l) of active material which is prone to proteolysis and aggregation. Here we report a strategy to secrete folded, soluble single chain T-cell receptors (scTCR) in the Escherichia coli periplasm using three representative alphabeta TCRs (172.10, 1934.4/c19 and 2B4). Shake flask yields between 0.5 and 30 mg/l active, purified material were attained for all TCRs studied and found to depend on the introduction of solubility-increasing amino acid substitutions, skp chaperone co-expression and C-terminal fusion to a human kappa constant domain in the context of a tightly regulated expression vector. This system will greatly enable crystallographic, thermodynamic and other biophysical analyses of TCRs which require large quantities of homogeneous material.

Codon optimization reveals critical factors for high level expression of two rare codon genes in Escherichia coli: RNA stability and secondary structure but not tRNA abundance

Expression patterns in Escherichia coli of two small archaeal proteins with a natural content of about 30% rare codons were analyzed. The proteins, a histone-like protein from Sulfolobus shibatae (Ssh10), and a glutaredoxin-like protein from Methanobacterium thermoautotrophicum (mtGrx), were produced with expression plasmids encoding wild-type genes, codon-optimized synthetic, and GST-fusion genes. These constructs were expressed in BL21 (DE3), its LysS derivative, and modified strains carrying copies for rare codon tRNAs or deletions in the RNAseE gene. Both Ssh10 and mtGrx expression levels were constitutively high in BL21(DE3) and its derivatives, with the exception of the LysS phenotype, which prevented high level expression of the Ssh10 wild-type gene. Surprisingly, a codon-optimized mtGrx gene construct displayed undetectable levels of protein production. The translational block observed with the synthetic mtGrx gene could be circumvented by using a synthetic mtGrx-glutathione S-transferase (GST) fusion construct or by in vitro translation. Taken together, the results underscore the importance of mRNA levels and RNA stability, but not necessarily tRNA abundance for efficient heterologous protein production in E. coli.

Effects of codon usage versus putative 5'-mRNA structure on the expression of Fusarium solani cutinase in the Escherichia coli cytoplasm

Matching the codon usage of recombinant genes to that of the expression host is a common strategy for increasing the expression of heterologous proteins in bacteria. However, while developing a cytoplasmic expression system for Fusarium solani cutinase in Escherichia coli, we found that altering codons to those preferred by E. coli led to significantly lower expression compared to the wild-type fungal gene, despite the presence of several rare E. coli codons in the fungal sequence. On the other hand, expression in the E. coli periplasm using a bacterial PhoA leader sequence resulted in high levels of expression for both the E. coli optimized and wild-type constructs. Sequence swapping experiments as well as calculations of predicted mRNA secondary structure provided support for the hypothesis that differential cytoplasmic expression of the E. coli optimized versus wild-type cutinase genes is due to differences in 5(') mRNA secondary structures. In particular, our results indicate that increased stability of 5(') mRNA secondary structures in the E. coli optimized transcript prevents efficient translation initiation in the absence of the phoA leader sequence. These results underscore the idea that potential 5(') mRNA secondary structures should be considered along with codon usage when designing a synthetic gene for high level expression in E. coli.

Dual coenzyme specificity of Archaeoglobus fulgidus HMG-CoA reductase

Comparison of the inferred amino acid sequence of orf AF1736 of Archaeoglobus fulgidus to that of Pseudomonas mevalonii HMG-CoA reductase suggested that AF1736 might encode a Class II HMG-CoA reductase. Following polymerase chain reaction-based cloning of AF1736 from A. fulgidus genomic DNA and expression in Escherichia coli, the encoded enzyme was purified to apparent homogeneity and its enzymic properties were determined. Activity was optimal at 85 degrees C, deltaHa was 54 kJ/mol, and the statin drug mevinolin inhibited competitively with HMG-CoA (Ki 180 microM). Protonated forms of His390 and Lys277, the apparent cognates of the active site histidine and lysine of the P. mevalonii enzyme, appear essential for activity. The mechanism proposed for catalysis of P. mevalonii HMG-CoA reductase thus appears valid for A. fulgidus HMG-CoA reductase. Unlike any other HMG-CoA reductase, the A. fulgidus enzyme exhibits dual coenzyme specificity. pH-activity profiles for all four reactions revealed that optimal activity using NADP(H) occurred at a pH from 1 to 3 units more acidic than that observed using NAD(H). Kinetic parameters were therefore determined for all substrates for all four catalyzed reactions using either NAD(H) or NADP(H). NADPH and NADH compete for occupancy of a common site. k(cat)[NAD(H)]/k(cat)[NADP(H)] varied from unity to under 70 for the four reactions, indicative of slight preference for NAD(H). The results indicate the importance of the protonated status of active site residues His390 and Lys277, shown by altered K(M) and k(cat) values, and indicate that NAD(H) and NADP(H) have comparable affinity for the same site.

Expression and characterization of the HMG-CoA reductase of the thermophilic archaeon Sulfolobus solfataricus

The thermostable class I HMG-CoA reductase of Sulfolobus solfataricus offers potential for industrial applications and for the initiation of crystallization trials of a biosynthetic HMG-CoA reductase. However, of the 15 arginine codons of the hmgA gene that encodes S. solfataricus HMG-CoA reductase, 14 (93%) are AGA or AGG, the arginine codons used least frequently by Escherichia coli. The presence of these rare codons in tandem or in the first 20 codons of a gene can complicate expression of that gene in E. coli. Problems include premature chain termination and misincorporation of lysine for arginine. We therefore sought to improve the expression and subsequent yield of S. solfataricus HMG-CoA reductase by expanding the pool size of tRNA(AGA,AGG), the tRNA that recognizes these two rare codons. Coexpression of the S. solfataricus hmgA gene with the argU gene that encodes tRNA(AGA,AGG) resulted in an over 10-fold increase in enzyme yield. This has provided significantly greater quantities of purified enzyme for potential industrial applications and for crystallographic characterization of a stable class I HMG-CoA reductase. It has, in addition, facilitated determination of kinetic parameters and of pH optima for all four catalyzed reactions, for determination of the K(i) for inhibition by the statin drug mevinolin, and for comparison of the properties of the HMG-CoA reductase of this thermophilic archaeon to those of other class I HMG-CoA reductases.

Components of vectors for gene transfer and expression in mammalian cells

Progress in diverse scientific fields has been realized partly by the continued refinement of mammalian gene expression vectors. A growing understanding of biological processes now allows the design of vector components to meet specific objectives. Thus, gene expression in a tissue-selective or ubiquitous manner may be accomplished by selecting appropriate promoter/enhancer elements; stabilization of labile mRNAs may be effected through removal of 3' untranslated regions or fusion to heterologous stabilizing sequences; protein targeting to selected tissues or different organelles is carried out using specific signal sequences; fusion moieties effect the detection, enhanced yield, surface expression, prolongation of half-life, and facile purification of recombinant proteins; and careful tailoring of the codon content of heterologous genes enhances protein production from poorly translated transcripts. The use of viral as well as nonviral genetic elements in vectors allows the stable replication of episomal elements without the need for chromosomal integration. The development of baculovirus vectors for both transient and stable gene expression in mammalian cells has expanded the utility of such vectors for a broad range of cell types. Internal ribosome entry sites are now widely used in many applications that require coexpression of different genes. Progress in gene targeting techniques is likely to transform gene expression and amplification in mammalian cells into a considerably less labor-intensive operation. Future progress in the elucidation of eukaryotic protein degradation pathways holds promise for developing methods to minimize proteolysis of specific recombinant proteins in mammalian cells and tissues.

A new membrane-bound OprI lipoprotein expression vector. High production of heterologous fusion proteins in gram (-) bacteria and the implications for oral vaccination

We have previously described the development of cloning vectors for the production of OprI-based outer membrane fusion proteins in E. coli (Cornelis et al., 1996) and now describe the construction of a new vector, containing a lacI(q) gene, resulting in tight repression of the promotor and allowing its use in other Gram (-) bacteria. The new pVUB3 expression vector encodes a truncated but active LacI(q)(341) repressor which binds to the single operator in the vector. A high repression of the trc promotor was observed, resulting in a very low basal leakage of expression and very high production levels of OprI or derivatives after IPTG induction in E. coli. Bacterial viability was not affected under uninduced conditions, but the number of viable cell counts decreased after production of large amounts of the outer membrane-bound OprI lipoprotein and its derivatives, both in E. coli and Salmonella typhimurium. This highly repressible system allows us to extend the use of OprI vectors in other Gram (-) bacteria, resulting in the production of outer membrane-bound lipid-modified molecules, opening the possibility for its application in the design of potential live Salmonella-based subunit vaccines.

Strategies for optimizing heterologous protein expression in Escherichia coli

The many advantages of Escherichia coli have ensured that it remains a valuable host for the efficient, cost-effective and high-level production of heterologous proteins. Here, we describe the current status of this prokaryotic expression system and focus on strategies designed to maximize the yields of recombinant proteins. Major challenges facing this expression system are also outlined.