Separation of carbamazepine and five metabolites, and analysis in human plasma by micellar electrokinetic capillary chromatography

Differentiation of isomeric metabolites of carbamazepine based on acid-base properties; Experimental vs theoretical approach

Metabolism of carbamazepine is complex and leads to the three isomeric derivatives whose occurrence is dependent on the type of sample material. Their unambiguous differentiation is overall important. In this work, the qualitative analysis of 2-hydroxycarbamazepine, 3-hydroxycrbamazepine and carbamazepine-10,11-epoxide was attempted for the first time using capillary zone electrophoresis, based on the models linking electrophoretic mobility with pK_a value determining the acidity of the hydroxyl groups. For this purpose, pK_a values ​​were determined using electrophoretic and theoretical methods, and then the compliance of the obtained mobility models with the measured values ​​was analyzed. Despite the slight difference in acidity ​​(0.3-0.4 pH unit), the obtained results prove that the correct identification of the metabolites under consideration, and reliable prediction of the selectivity of their separation, are possible on the basis of experimentally determined pK_a values, even with highly simplified methods assuming the lack of certain data. However, it is important to choose the optimal pH value, which should be close to pK_a. On the other hand, worse results were obtained for the theoretically determined mobilities, which differed significantly from the experimental values. An attempt was also made to explain the acidity of hydroxycarbamazepines and the associated thermodynamic parameters - deprotonation enthalpy and entropy, with respect to their structure. The lack of intramolecular hydrogen bonds and the significant contribution of entropic effects stabilizing the protonated form seems to be significant. The higher pK_a value for CBZ-2-OH probably results from the stronger effect of the energetically unfavorable organization of solvent dipoles due to ionization.

Quantitative bioanalytical and analytical method development of dibenzazepine derivative, carbamazepine: A review

Bioanalytical methods are widely used for quantitative estimation of drugs and their metabolites in physiological matrices. These methods could be applied to studies in areas of human clinical pharmacology and toxicology. The major bioanalytical services are method development, method validation and sample analysis (method application). Various methods such as GC, LC-MS/MS, HPLC, HPTLC, micellar electrokinetic chromatography, and UFLC have been used in laboratories for the qualitative and quantitative analysis of carbamazepine in biological samples throughout all phases of clinical research and quality control. The article incorporates various reported methods developed to help analysts in choosing crucial parameters for new method development of carbamazepine and its derivatives and also enumerates metabolites, and impurities reported so far.

Simultaneous multiresponse optimization applied to epinastine determination in human serum by using capillary electrophoresis

Experimental design and optimization techniques were implemented for the development of a rapid and simple capillary zone electrophoresis method (CZE) for the determination of epinastine hydrochloride in human serum. The effects of five factors were studied on the resolution between the peaks for the target analyte (epinastine hydrochloride) and lidocaine hydrochloride, used as internal standard, as well as on the analysis time. The factors were the concentration and pH of the buffer, the injection time, the injection voltage and the separation voltage. The separation was carried out by using an uncoated silica capillary with 50 microm i.d. and total length 64.5 cm (150 microm of path length) and UV detection (200 nm). Multiple response simultaneous optimization by using the desirability function was used to find experimental conditions where the system generates desirable results. The optimum conditions were: sodium phosphate buffer solution, 16.0 mmol L(-1); pH 8.50; injection voltage, 20.0 kV; injection time, 30 s; separation voltage, 26.7 kV. The method was confirmed to be linear in the range of 2.0-12 ng mL(-1). The injection repeatability of the method was evaluated by six injections at three concentration levels, while intra-assay precision was assessed by analysing a single concentration level, yielding a CV's of ca. 1% for standard and 2% for serum samples. Accuracy was evaluated by recovery assays and by comparing with an HPLC method, the results being acceptable according to regulatory agencies. The rudgeness was evaluated by means of an experimental Plackett-Burman design, in which the accuracy was assessed when small changes were set in the studied parameters. Clean-up of human serum samples was carried out by means of a liquid-liquid extraction procedure, which gave a high extraction yield for epinastine hydrochloride (93.00%).

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate-co-ethylene dimethacrylate or 3-sulfopropyl methacrylate-co-butyl methacrylate-co-ethylene dimethacrylate. Using a 1cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).

Haplotype structures of EPHX1 and their effects on the metabolism of carbamazepine-10,11-epoxide in Japanese epileptic patients

OBJECTIVE

Microsomal epoxide hydrolase (mEH) is an enzyme that detoxifies reactive epoxides and catalyzes the biotransformation of carbamazepine-10,11-epoxide (CBZ-epoxide) to carbamazepine-10,11-diol (CBZ-diol). Utilizing single nucleotide polymorphisms (SNPs) of the EPHX1 gene encoding mEH, we identified the haplotypes of EPHX1 blocks and investigated the association between the block haplotypes and CBZ-epoxide metabolism.

METHODS

SNPs of EPHX1 were analyzed by means of polymerase chain reaction amplification and DNA sequencing using DNA extracted from the blood leukocytes of 96 Japanese epileptic patients, including 58 carbamazepine-administered patients. The plasma concentrations of CBZ and its four metabolites were determined using high-performance liquid chromatography.

RESULTS

From sequencing all 9 exons and their surrounding introns, 29 SNPs were found in EPHX1. The SNPs were separated into three blocks on the basis of linkage disequilibrium, and the block haplotype combinations (diplotypes) were assigned. Using plasma CBZ-diol/CBZ-epoxide ratios (diol/epoxide ratios) indicative of the mEH activity, the effects of the diplotypes in each EPHX1 block were analyzed on CBZ-epoxide metabolism. In block 2, the diol/epoxide ratios increased significantly depending on the number of haplotype *2 bearing Y113H (P=0.0241). In block 3, the ratios decreased depending on the number of haplotype *2 bearing H139R (P=0.0351). Also, an increasing effect of a *1 subtype, *1c, was observed on the ratio.

CONCLUSION

These results show that some EPHX1 haplotypes are associated with altered CBZ-epoxide metabolism. This is the first report on the haplotype structures of EPHX1 and their potential in vivo effects.

Analysis of antiepileptic drugs in biological fluids by means of electrokinetic chromatography

An overview of the electrokinetic chromatographic methods for the analysis of antiepileptic drug levels in biological samples is presented. In particular, micellar electrokinetic capillary chromatography is a very suitable method for the determination of these drugs, because it allows a rapid, selective, and accurate analysis. In addition to the electrokinetic chromatographic studies on the determination of antiepileptic drugs, some information regarding sample pretreatment will also be reported: this is a critical step when the analysis of biological fluids is concerned. The electrokinetic chromatographic methods for the determination of recent antiepileptic drugs (e.g., lamotrigine, levetiracetam) and classical anticonvulsants (e.g., carbamazepine, phenytoin, ethosuximide, valproic acid) will be discussed in depth, and their pharmacological profiles will be briefly described as well.

Quantitation of oxcarbazepine and its metabolites in human plasma by micellar electrokinetic chromatography

A reliable micellar electrokinetic chromatographic method for the determination of oxcarbazepine and its two main metabolites, 10-hydroxycarbamazepine and 10,11-trans-dihydroxy-10,11-dihydroxycarbamazepine, in human plasma was developed. The separation and determination of the analytes was achieved using a system consisting of 60 mM SDS in phosphate buffer (30 mM, pH 8.0), to which 20% (v/v) methanol was added. Separation was carried out in an uncoated fused-silica capillary with a separation voltage of 25 kV and currents typically less than 40 microA. Spectrophotometric detection was at 205 nm. Isolation of oxcarbazepine and its metabolites from plasma was accomplished by a solid-phase extraction procedure. The mean extraction yield of the analytes from plasma was higher than 94%. The linear correlation coefficients were better than 0.994 for all analytes. The limit of detection was 0.05 microg/mL, the limit of quantitation 0.15 microg/mL. The repeatability for the spiked blank plasma samples was lower than 1.9% and the intermediate precision lower than 2.1%, both expressed as RSD%. The results obtained analysing real plasma samples from epileptic patients under therapy with Tolep were satisfactory in terms of precision, accuracy and detectability.

Octakis-6-sulfato-gamma-cyclodextrin as additive for capillary electrokinetic chromatography of dibenzoazepines: carbamazepine, oxcarbamazepine and their metabolites

Single isomer octakis-(2,3-dihydroxy-)6-sulfato-gamma-cyclodextrin used as pseudostationary phase of the background electrolyte interacts with dibenzo[b,f]azepines (consisting of a condensed 3-ring system) and forms negatively charged complexes. Hydroxygroups in position 2 and 3 at carbamazepine increase the extent of interaction, whereas substitution by oxygen at position 10 and/or 11 reduces it. The complex constants for the analytes are ranging from few tens L/mol (10-hydroxycarbamazepine, 10,11-dihydroxycarbamazepine, 10,11-epoxycarbamazepine, oxcarbazepine) to several hundreds L/mol (carbamazepine, 2-hydroxycarbamazepine, 3-hydroxycarbamazepine), and are much larger than those of the analytes with octakis-(2,3-dimethyl-)-6-sulfato-gamma-cyclodextrin. Full enantiomeric separation of the chiral metabolites of carbamazepine and oxcarbazepine is obtained at octakis-(2,3-dihydroxy-)-6-sulfato-gamma-cyclodextrin concentrations of about 10 mM (3 mM borate buffer, pH 8.5). Compared to heptakis-6-sulfato-beta-cyclodextrin, selectivity differs and stereoselectivity is more pronounced.