An overview of the recent trends in development of HPLC methods for determination of impurities in drugs

Development of a high-speed and ultrasensitive UV/Vis-CM for detecting total triterpenes in traditional Chinese medicine and its application

This study proposes a novel colorimetric method based on the ultraviolet/visible spectrophotometry-colorimetric method (UV/Vis-CM) for detecting and quantifying total triterpenoids in traditional Chinese medicine. By incorporating the colourants 2-hydroxy-5-methylbenzaldehyde and concentrated sulfuric acid, triterpenoid compounds colour development became more sensitive, and the detection accuracy was significantly improved. 2-hydroxy-5-methylbenzaldehyde and concentrated sulfuric acid were incorporated in a 1:3 vol ratio at room temperature to react with the total triterpenes for 25 min, incorporated to an ice bath for 5 min, and then detected at the optimal absorption wavelength. The accuracy and reliability of this method were verified by comparison with high-performance liquid chromatography and four other colorimetric methods. Additionally, this approach has the advantages of not requiring heating during operation, high sensitivity, short usage time, low solvent usage, and low equipment costs. This study not only offers a reliable method for detecting total triterpenes in traditional Chinese medicine but also offers a rapid detection tool for on-site testing and large-scale screening, laying a foundation for the modernization of traditional Chinese medicine research, quality control, and drug development.

Interconnected environmental challenges: heavy metal-drug interactions and their impacts on ecosystems

Industrial expansion and inadequate environmental safety measures are major contributors to environmental contamination, with heavy metals (HMs) and pharmaceutical waste playing crucial roles. Their negative effects are most noticeable in aquatic species and vegetation, where they accumulate in tissues and cause harmful results. Interactions between HMs and pharmaceutical molecules result in the production of metal-drug complexes (MDCs), which have the potential to disturb diverse ecosystems and their interdependence. However, present studies frequently focus on individual pollutants and their effects on specific environmental parameters, leaving out the cumulative effects of pollutants and their processes across several environmental domains. To address this gap, this review emphasizes the environmental sources of HMs, elucidates their emission pathways during anthropogenic activities, investigates the interactions between HMs and pharmaceutical substances, and defines the mechanisms underlying the formation of MDCs across various ecosystems. Furthermore, this review underscores the simultaneous occurrence of HMs and pharmaceutical waste across diverse ecosystems, including the atmosphere, soil, and water resources, and their incorporation into biotic organisms across trophic levels. It is important to note that these complex compounds represent a higher risk than individual contaminants.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

[Detection of four biogenic amines by liquid chromatography based on aptamer signal replacement combined with cyclic amplification]

Biogenic amines (BAs) represent a class of potentially harmful substances in foods and medicines. Their content is thus an important indicator of proper hygiene in food preparation, and purity of medicines. It is of great practical significance to establish accurate and sensitive detection of BAs in food and drugs. In this study, a high performance liquid chromatography (HPLC) method was developed for the simultaneous detection of multiple BAs in fish, pork and antibiotics based on aptamer signal replacement and cyclic amplification strategy. First, non-fluorescent targets were converted into fluorescent nucleic acid probes using a two-step replacement process. Subsequently, a large number of nucleic acid probes with different lengths and base sequences were generated using a double-stranded specific nuclease-assisted signal amplification strategy. Finally, various BAs in real samples were accurately identified using an HPLC platform. The influence of base sequence and nucleic acid probe length on separation via HPLC was studied to improve discrimination among fluorescent signals. Four different sequences were selected as tails to the DNA probe, and their retention times increased in turn. Experimental conditions, including column temperature, flow rate, gradient elution process, reaction temperature, and incubation time, were optimized by orthogonal experiments to further improve signal separation efficiency. Specifically, the methanol gradient was changed from 10% to 20% during 0-20 min, 35 ℃ of column temperature and 1.0 mL/min of flow rate were chosen as the HPLC conditions. The final resolution of chromatographic peaks was 3.44, 3.59 and 2.37, indicating complete separation between peaks. Optimal incubation time for BA capture by aptamer was 120 min, and optimal dosage of duplex specific nuclease (DSN) and Mg2+were 0.9 U and 30 mmol/L. The optimal pH, incubation temperature, and DSN incubation time were 7.0, 40 ℃ and 210 min, respectively. The proposed method exhibited high sensitivity towards BAs, with a linear range of 1 pmol/L-1 μmol/L, and the limits of detection of tyramine, histamine, spermine, and tryptamine were 0.25, 0.21, 0.27 and 0.19 pmol/L, respectively. The feasibility of this method was verified, and contrast experiments indicated that it could achieve highly selective detection of four BAs in one run. The applicability of this integrated method was also investigated for the detection of real samples (gentamycin sulfate, fish and pork). To assess the matrix effect, each BA with different concentrations were spiked into real fish and pork samples. Relative recoveries and relative standard deviations (RSDs) ranged from 101.2% to 104.5% and from 1.5% to 4.3%, respectively. The above detection results for real samples showed that this method could accurately capture, separate, and identify BAs in complex matrix samples. This strategy can effectively improve analyte selectivity and reduce the matrix effect. This assay is thus expected to provide a new approach for food and drug analyses.

A new green approach for the reduction of consumed solvents and simultaneous quality control analysis of several pharmaceuticals using a fast and economic RP-HPLC method; a case study for a mixture of piracetam, ketoprofen and omeprazole drugs

One of the main aims of green analytical chemistry (GAC) is the reduction of solvents and chemicals consumed. Recycling the mobile phase in chromatographic techniques provides an efficient way to implement GAC principles. However, this is not an easy job, particularly in the case of the gradient mode. Analysis of multi-pharmaceuticals for the same manufacturer using one mobile phase system dramatically reduces consumed solvents, time, and cost for pharmaceuticals analysis in quality control laboratories. This work is an attempt to reduce time, cost and effort needed for quality control analysis of several dosage forms produced by the same manufacturer. Our novel and green RP-HPLC method is able to separate and quantify a tertiary mixture of piracetam, ketoprofen and omeprazole produced by the same manufacturers. The analyst can easily quantify the three drugs in the three dosage forms in one run using the gradient elution mode of methanol and water (from 50% methanol to 85% methanol in ten minutes) with a flow rate 1.5 mL min⁻¹ on a non-polar C₁₈ column. Suitable dilutions were done for the working solution of the mixed pharmaceutical formulations prior to chromatographic analysis. This procedure will dramatically reduce the consumed solvents and save time and money during pharmaceutical analysis. The calibration ranges are (5–25), (5–25) and (3–20) μg mL⁻¹ for the three studied drugs. The International Council for Harmonization (ICH) procedures were followed in the validation process and the results were evaluated in comparison with official HPLC methods, where no noteworthy differences were found. The green profile of the method and pictograms of AGREE and Green Analytical Procedure Index (GAPI) approaches proved the eco-friendly character for the studied drugs. The simultaneous quantitative analysis for Stimulan® and Hyposec® capsules, and Ketolgin® tablets from the Amoun Pharmaceutical Company, Egypt, can be accomplished via the novel method. Also, Memoral® ampoules, Topfam® tablets, and Gastroloc® capsules from Sigma Pharmaceutical Industries, Egypt, could be analyzed simultaneously. Omez® capsules and Ketogesic® tablets from the Pharaonia Pharmaceuticals, Egypt, could be determined simultaneously too. Applying this RP-HPLC method, a significant reduction of the total cost is assured as the required amount of solvent is noticeably decreased when performing multi-analyses in comparison to single component analysis.

We report a novel and green RP-HPLC method able to separate and quantify a tertiary mixture of piracetam, ketoprofen and omeprazole produced by the same manufacturers.

An Overview of Advances in the Chromatography of Drugs Impurity Profiling

A systematic literature survey published in several journals of pharmaceutical chemistry and of chromatography used to analyze impurities for most of the drugs that have been reviewed. This article covers the period from 2016 to 2020, in which almost of chromatographic techniques have been used for drug impurity analysis. These chromatography techniques are important in the analysis and description of drug impurities. Moreover, some recent developments in forced impurity profiling have been discussed, such as buffer solutions, mobile phase, columns, elution modes, and detectors are highlighted in drugs used for the study. This primarily focuses on thorough updating of different analytical methods which include hyphenated techniques for detecting and quantifying impurity and degradation levels in various pharmaceutical matrices.

Validated chromatographic methods for the simultaneous determination of a ternary mixture of sulfacetamide sodium and two of its official impurities; sulfanilamide and dapsone

Sulfacetamide sodium is a widely prescribed sulfonamide drug due to its topical antibacterial action on eye and skin. Four impurities are stated in the British Pharmacopoeia among which are sulfanilamide and dapsone. This work presents two specific, accurate and precise chromatographic methods for the simultaneous determination of a mixture of sulfacetamide sodium, sulfanilamide and dapsone. The first method is an isocratic RP-HPLC where the separation of components was achieved on C18 column. A green mobile phase was used consisting of methanol:water (60:40, v/v). The flow rate was 1.0 mL/min and effluent was monitored at 273 nm. The second method is a TLC-spectrodensitometric one where good separation was achieved by using silica plates and a mobile phase consisting of chloroform:dichloromethane:acetic acid (6:2.5:1.5, by volume). Determination was done by densitometry in the absorbance mode at 273 nm. Both methods were validated in compliance with ICH guidelines. They were also successfully applied for the determination of sulfacetamide sodium and its impurities in Ocusol® ophthalmic solutions. The obtained results were statistically compared to the results obtained by applying the official methods of analysis of each component where no significant difference was found with respect to accuracy and precision.

Development of a stability-indicating assay method by HPLC-DAD and MS characterization of forced degradation products of ravuconazole

Ravuconazole (RAV) is a triazole antifungal with broad spectrum and a novel alternative in the treatment of systemic fungal infections. A stability-indicating method by high-performance liquid chromatography-diode array detection was developed and fully validated to assay ravuconazole in the presence of its degradation products. Separation was achieved with a Sunfire C18 column (250 mm × 4.6 mm id, 5 μm), mobile phase composed of acetonitrile and water (80:20), at 1 mL/min. The volume of injection was 5 μL and DAD detection was performed at 287 nm. RAV was well resolved from its degradation products and the method proved to be linear, selective, accurate, precise and robust. A forced degradation study was conducted on the pure drug under oxidative conditions in presence of H2O2 and metallic ions and under acid, alkaline and neutral hydrolysis. RAV was degraded mainly under alkaline hydrolysis, forming two main degradation products. The chemical structures were proposed according to the data obtained by liquid chromatography coupled to mass spectrometry (LC-MS) analysis. This study provided a new and selective stability-indicating method to evaluate the intrinsic stability of ravuconazole in active pharmaceutical ingredients. The developed method was found to be suitable for quality control routine analysis and to stability studies of ravuconazole.

Large scale purification and characterization of A21 deamidated variant-most prominent post translational modification (PTM) for insulins which is also widely observed in insulins pharmaceutical manufacturing and storage

Biopharmaceutical development demands appropriate understanding of product related variants, which are formed due to post-translational modification and during downstream processing. These variants can lead to low yield, reduced biological activity, and suboptimal product quality. In addition, these variants may undergo immune reactions, henceforth need to be appropriately controlled to ensure consistent product quality and patient safety. Deamidation of insulin is the most common post-translational modification occurring in insulin and insulin analogues. Asn^A21 desamido variant is also the most prominent product variant formed during human insulin manufacturing process and/or during the storage. Often, this deamidated variant is used as an impurity standard during in-process and final product analysis in the QC system. However, purification of large quantity of purified deamidated material is always being challenging due to highly similar mass, ionic, hydrophobic properties, and high structural similarity of the variant compared to the parent product. Present work demonstrates the simplified and efficient scalable process for generation of Asn^A21 deamidated variant in powder form with ~96% purity. The mixed-mode property of anion exchange resin PolyQuat was utilized to purify the deamidated impurity with high recovery. Subsequent reversed-phase high performance liquid chromatography (RP-HPLC) step was introduced for concentration of product in bind elute mode. Elution pool undergone isoelectric precipitation and lyophilisation. The lyophilized product allows users for convenient use of the deamidated impurity for intended purposes. Detailed characterization by Mass spectrometry revealed deamidation is at Asn^A21 and further confirmed that, structural and functional characterization as well as the biological activity of isolated variant is equivalent to insulin.

pH-dependent selective separation of acidic and basic proteins using quaternary ammoniation functionalized cysteine-zwitterionic stationary phase with RPLC/IEC mixed-mode chromatography

In this paper, a cysteine-functionalized zwitterionic stationary phase (Cys-silica) was prepared based on the "thiol-ene" click chemistry between cysteine and vinyl-functionalized silica, and was further modified with bromoethane, 1-bromooctane and 1-bromooctadecane, respectively, to obtain a series of quaternary ammoniation-functionalized stationary phases (Cys-silica-C_n, n = 2, 8 and 18). These zwitterionic stationary phases were regarded as reversed-phase/ion-exchange (RP/IEC) mixed-mode chromatography (MMC) stationary phases for protein separation. The retention behaviors of proteins on these zwitterionic stationary phases were carefully investigated. The results indicated that the retentions of acidic and basic proteins on these zwitterinonic stationary phases were significantly influenced by the acetonitrile and salt concentrations, pH of mobile phase as well as the hydrophobicity of the ligand. The separation selectivity of proteins on these zwitterionic stationary phases strongly depended on the pH value of mobile phase. The baseline separation of 6 kinds of basic proteins can be achieved at pH 8.0 using Cys-silica-C2 or Cys-silica-C8 column, and 5 kinds of acidic proteins can also be separated completely at pH 4.0 with Cys-silica-C2 column. Moreover, owing to the quaternary ammoniation-functionalization on Cys-silica by using appropriately hydrophobic bromoalkanes, the selectivity and separation efficiency of proteins can be enhanced greatly. As a result, the acidic and basic proteins can be separated completely step by step from the complex sample by adjusting pH of mobile phase using a single Cys-silica-C2 column, which illustrates that the cysteine-functionalized zwitterionic stationary phase has a great potential for protein separation.

Analysis of Organic Impurities of Besifloxacin Hydrochloride by High-Performance Liquid Chromatography with Isocratic and Gradient Elution

Introduction:

Impurity analysis is an important step in the quality control of pharmaceutical ingredients and the final product. Impurities can arise from drug synthesis or excipients and even at small concentrations may affect product efficacy and safety. In this work, two methods using highperformance liquid chromatography (HPLC) were developed and validated for the evaluation of besifloxacin and its impurity synthesis, with isocratic elution and another with gradient elution.

Method:

The analysis by HPLC in isocratic elution mode was performed using a cyano column maintained at 25 °C. The mobile phase was composed of 0.5% triethylamine (pH 3.0): acetonitrile (88:12 v/v) eluted at a flow rate of 1.0 mL/min with detection at 330 nm. The gradient elution method was carried out with the same column and mobile phase components only modifying the rate between organic and aqueous phase during analysis. The procedures have been validated according to internationally accepted guidelines, observing results within acceptable limits.

Results:

The methods presented were found to be linear in the 140 to 260 μg/ mL range for besifloxacin and 0.3 to 2.3 μg/ mL for an impurity named A. The limits of detection and quantification were, respectively, 0.07 and 0.3 μg/ mL for impurity A, with a 20 μL injection volume. The precision achieved for all analyses performed provided RSD inter-day equal to 6.47 and 6.36% for impurity A with isocratic elution and gradient, respectively. The accuracy was higher than 99% and robustness exhibited satisfactory results. In the isocratic method, an analysis time of 25 min and 15 min was obtained for the gradient. For impurity A, the number of theoretical plates in the isocratic mode was about 5000 while in the gradient mode it was about 45000, hence, it made the column more efficient by changing the mobile phase composition during elution. In besifloxacin raw material and in the pharmaceutical product used in this study, other related impurities were present but impurity A was searched for and not detected.

Conclusion:

The proposed methods can be applied for the quantitative determination of impurities in the analysis of the besifloxacin raw material, as well as in ophthalmic suspension of the drug, considering the quantitation limit.

Fundamental to achieving fast separations with high efficiency: A review of chromatography with superficially porous particles

Types of particles have been fundamental to LC separation technology for many years. Originally, LC columns were packed with large-diameter (>100 μm) calcium carbonate, silica gel, or alumina particles that prohibited fast mobile-phase speeds because of the slow diffusion of sample molecules inside deep pores. During the birth of HPLC in the 1960s, superficially porous particles (SPP, ≥30 μm) were developed as the first high-speed stationary-phase support structures commercialized, which permitted faster mobile-phase flowrates due to the fast movement of sample molecules in/out of the thin shells. These initial SPPs were displaced by smaller totally porous particles (TPP) in the mid-1970s. But SPP history repeated when UHPLC emerged in the 2000s. Stationary-phase support structures made from sub-3-μm SPPs were introduced to chromatographers in 2006. The initial purpose of this modern SPP was to enable chromatographers to achieve fast separations with high efficiency using conventional HPLCs. Later, the introduction of sub-2-μm SPPs with UHPLC instruments pushed the separation speed and efficiency to a very fast zone. This review aims at providing readers a comprehensive and up-to-date view on the advantages of SPP materials over TPPs historically and theoretically from the material science angle.

Measuring atropisomers of BMS-986142 using 2DLC as an enabling technology

BMS-986142 has been developed as an innovative Bruton's tyrosine kinase inhibitor for treatment of several autoimmune diseases. The drug substance of BMS-986142 may contain three potential atropisomeric impurities due to its unique structural characteristics. Developing a single liquid chromatography (LC) method to separate all four highly structurally related atropisomers and other process impurities from each other turned out to be a daunting task. Two-dimensional LC (2DLC) was found to be an extremely powerful enabling technology for extracting purity information out of the complex sample impurity profile and facilitated process development before a final single dimension method was discovered. The off-the-shelf 2DLC instrument could be configured to allow injection of the targeted first dimension peak through either no-loss multiple heart-cutting fractions or as a large, single volume fraction with on-line dilution. Excellent precision (relative standard deviation of 0.3 %) and recovery (101.2 ± 0.2 %) was achieved for an atropisomer impurity at a 10 % monitoring level in the first configuration with sensitivity down to 0.2 % w/w. With the second instrument configuration, which eliminated the need for fraction recombination, similar figures of merit were maintained for the second dimension at the cost of losing the ability to collect and park multiple fractions.

Stability-indicating method for the novel antifungal compound RI76: Characterization and in vitro antifungal activity of its active degradation product

RI76 is a novel 2-thiazolylhydrazone compound with reported antifungal activity. In preclinical drug development, it is fundamental to know the impurity profile and to understand degradation mechanisms of the molecule. In our study, RI76 was subjected to forced degradation conditions, and a stability-indicating HPLC-DAD method was developed and validated. Separation was carried out on a C18 column (150 × 4.6 mm i.d., 5 μm) maintained at 40°C using a 1 mL/min flow rate of 2 mM ammonium acetate with 0.1% formic acid (pH 3.0) and acetonitrile in gradient mode. The method was linear in the range of 0.7-91 μg/mL for RI76 and 0.7-25 μg/mL for its degradation product PD76. The formation of a major degradation product was quickly observed when RI76 was in aqueous solution. The chemical structure of this product, named PD76, was proposed based on LC-UV-MS experiments, synthesized in-house, and confirmed by NMR spectroscopy and chromatographic analysis. In vitro antifungal activity assays demonstrated that this resultant product shows a promising activity against clinically important Candida and Cryptococcus strains, matching or surpassing the activity of its precursor and of well-established antifungal drugs.

Ultra-high performance supercritical fluid chromatography in impurity control II: Method validation

In our previous study we proposed a screening approach using ultra-high performance supercritical fluid chromatography for the determination of 10 pharmaceutical quality control mixtures. Most of resulting methods offered baseline separation of all analytes. However, some of these methods had to be further optimized to ensure their successful validation and applicability to impurity control in drug substance and drug products. Several challenges occurred during the optimization including: (i) the necessity of the resolution of active pharmaceutical ingredient and following impurity equaling at least 3, which was especially difficult to achieve for mixtures of structurally close compounds, (ii) unrepeatable elution of compounds eluting close to the dead volume or at the end of the gradient elution, and (iii) shifts in retention times due to the column aging and effects of additive. The most frequent optimization adjustments involved changes in gradient program. Other adjustments such as the substitution of Viridis UPC² HSS C18 SB column with a slightly different Acquity UPLC HSS C18 SB column, the addition of acetonitrile in the modifier, and the column coupling also led to beneficial changes in selectivity. Subsequently, validation of all 10 methods was carried out to prove the applicability of ultra-high performance supercritical fluid chromatography methods for the impurity control in pharmaceuticals. Parameters recommended by ICH guidelines Q2 and Q3 including specificity, linearity, range, lower and upper limit of quantification, limit of detection, accuracy, and precision were examined. In addition, intermediate precision and the accuracy profiles were determined for selected methods. Overall, only two impurities did not meet the validation criteria due to low resolution and low sensitivity, respectively. Only identification threshold and not reporting threshold was met for this impurity.

Analysis of some pharmaceuticals in the presence of their synthetic impurities by applying hybrid micelle liquid chromatography

A stability-indicating hybrid micelle liquid chromatography accompanied by UV detection was developed for the simultaneous analysis of either paracetamol (PCA) or pseudoephedrine hydrochloride (PSU) with their synthetic impurities. Mixture I contains PCA with p-amino phenol and p-nitro phenol, while mixture II involves the estimation of PSU with benzaldehyde and benzoic acid. Both mixtures were separated using a C18 column that was thermostatically maintained at 40°C and operating under a flow rate of 1.5 mL/min, applying UV detection at 240 nm for mixture I and 220 nm for mixture II. In both cases, the mobile phase consisted of 0.1 M sodium dodecyl sulfate, acetonitrile, and triethylamine (90:10:0.3, v/v/v) and adjusted to pH 4 (mixture I) or pH 3.7 (mixture II) using 2.0 M O-phosphoric acid. The proposed method was validated and successfully applied to assay different pharmaceuticals containing PCA or PSU. Moreover, the stability-indicating nature of the proposed method was proved through applying photolytic degradation procedures for PCA.

A Validated RP-HPLC Stability Method for the Estimation of Chlorthalidone and Its Process-Related Impurities in an API and Tablet Formulation

Low-dose thiazide and thiazide-like diuretics are widely used as first-line therapy for hypertension. Chlorthalidone, a monosulfamyl diuretic, is frequently prescribed in cases of hypertension and congestive heart failure. In this research paper, an improved reverse-phase HPLC method was developed for the simultaneous identification and quantitation of pharmacopoeia-listed and in-house process- and degradation-related impurities of chlorthalidone in bulk drug and formulations. Chromatographic separation was carried out on a C₈ column (250 × 4.6 mm; '5 μm particle size) at a flow rate of 1.4 mL/min with a 220 nm detection wavelength. Mobile phase A consisted of buffer solution (diammonium hydrogen orthophosphate (10 mM, pH 5.5)) and methanol at a 65 : 35 ratio (v/v), and mobile phase B consisted of buffer solution and methanol at a 50 : 50 ratio (v/v). The API and formulation were subjected to stress conditions such as acid, alkali, oxidation, thermal, and photolytic conditions. Validation studies for the in-house process impurities were performed for specificity, limit of detection (LOD), limit of quantitation (LOQ), linearity, precision, accuracy, and robustness. Thus, an improved RP-HPLC method capable of good separation of all known and unknown impurities with acceptable resolution and tailing factor was developed.

Chemometrics Approaches in Forced Degradation Studies of Pharmaceutical Drugs

Chemometrics is the chemistry field responsible for planning and extracting the maximum of information of experiments from chemical data using mathematical tools (linear algebra, statistics, and so on). Active pharmaceutical ingredients (APIs) can form impurities when exposed to excipients or environmental variables such as light, high temperatures, acidic or basic conditions, humidity, and oxidative environment. By considering that these impurities can affect the safety and efficacy of the drug product, it is necessary to know how these impurities are yielded and to establish the pathway of their formation. In this context, forced degradation studies of pharmaceutical drugs have been used for the characterization of physicochemical stability of APIs. These studies are also essential in the validation of analytical methodologies, in order to prove the selectivity of methods for the API and its impurities and to create strategies to avoid the formation of degradation products. This review aims to demonstrate how forced degradation studies have been actually performed and the applications of chemometric tools in related studies. Some papers are going to be discussed to exemplify the chemometric applications in forced degradation studies.

Green Analytical Methods for the Separation of Seven Antihistamines: Application in Separation of Azelastine and Related Impurities in Nasal Solution

Antihistamines are widely used to alleviate the symptoms caused by allergic reactions. Most of these drugs have zwitteriónicas and/or amphoteric characteristics, which confer additional analytical challenges. This work aimed to develop a single eco-friendly and efficient chromatographic methods for analysis of seven antihistamines, namely, azelastine HCl, desloratadine, ebastine, fexofenadine HCl, ketotifen, loratadine, and olopatadine HCl. The separations were obtained using RP C-18 LUNA (150x4.6mm, 5 μm) column. The mobile phase consisted of acetonitrile and acidified water (pH 2.1) in the following proportion: 15:85, v/v for desloratadine, 25:75, v/v for ketotifen and olopatadine, 32:68, v/v for fexofenadine, 35:65, v/v for azelastine and loratadine, and 45:55, v/v for ebastine. All separations were obtained in less than 7.0 min. A prototype method was fully validated and applied in the assay of azelastine HCl in nasal solutions. The proposed methods for analysis of seven antihistamines are highly efficient, selective, and sensitive. Moreover, all methods can be considered excellent in terms of greenness, with total organic residue < 2.5 mL/analysis. An improved gradient method is also described for separation of azelastine HCl and its related impurities.

Review for Analytical Methods for the Determination of Sodium Cephalothin

Infections are the second leading cause of global morbidity and mortality, therefore it is highly important to study the antimicrobial agents such as cephalosporins. Cephalothin, an antimicrobial agent that belongs to the class of cephalosporins, has bactericidal activity and it is widely used in the Brazilian health system. In literature, some analytical methods are found for the identification and quantification of this drug, which are essential for its quality control, which ensures maintaining the product characteristics, therapeutic efficacy and patient's safety. The aim of this article is to review the available information on analytical methods for cephalothin. Thus, this study presents a literature review on cephalothin and the analytical methods developed for the analysis of this drug in official and scientific papers. It is essential to note that most of the developed methods used toxic and hazardous solvents, which makes necessary industries and researchers choose to develop environmental-friendly techniques, which will contribute to the harmonization of science, human, and environmental health.

Smart systems for determination of drug's solubility

The solubility of drugs is a crucial physicochemical property in the drug discovery or development process and for improving the bioavailability of drugs. There are various methods for evaluating the solubility of drugs including manual measurement methods, mathematical methods, and smart methods. Manual measurement and mathematical methods have some defects which make the smart systems more reliable and important in this field. In this review, various instruments used for the solubility determination, along with the smart systems, have been discussed. Mechanism and applications of each method have been elaborated in detail. Moreover, unique characteristics as well as some limitations of discussed methods are also described.

Assessment of lisdexamfetamine dimesylate stability and identification of its degradation product by NMR spectroscopy

Lisdexamfetamine dimesylate (LDX), a long-acting prodrug stimulant indicated for the treatment of the attention-deficit/hyperactivity disorder (ADHD), was subjected to forced degradation studies by acid and alkaline hydrolysis and the degradation profile was studied. To obtain between 10-30% of degraded product, acid and alkaline conditions were assessed with solutions of 0.01 M, 0.1 M, 0.5 M, and 1 M of DCl and NaOD. These solutions were analyzed through 1 H NMR spectra. Acid hydrolysis produced no degradation in 0.01 M and 0.1 M DCl and 4.38%, 9.69%, and 17.75% of degradation LDX, respectively, in 0.5 M, 1 M (4h) and 1 M (4 + 12 h) DCl. And alkaline hydrolysis produced no degradation in 0.01 M and 0.1 M DCl and a degradation LDX extension of 8.5%, 14.30%, and 22.91%, respectively, in 0.5 M, 1 M (4h) and 1 M (4 + 12 h) NaOD. LDX solutions subjected to 1 M (4 + 12 h) acid and alkaline hydrolysis were evaluated by NMR spectra (1 H NMR, 13 C NMR, HSQC and HMBC). LDX degradation product (DP) was identified and its structure elucidated as a diastereoisomer of LDX: (2R)-2,6-diamino-N-[(2S)-1-phenylpropan-2-yl] hexanamide without their physical separation.

Impurity profiling of drug candidates: Analytical strategies using reversed-phase and mixed-mode high-performance liquid chromatography methods

The development of new active pharmaceutical ingredients (API) requires accurate impurity profiling. Nowadays, reversed-phase HPLC (RPLC) on C18 stationary phase is the method of first choice for this task and usually employed in generic screening methods. However, this method sometimes fails, especially when the target analyte is not sufficiently retained, making impurity analysis difficult or even impossible. In such cases, a second method must be available. In the present paper, we compare the merits of RPLC on C18 phase to those of previously optimized alternative methods, based on the analysis of a large and diverse set of small-molecule drug candidates. Various strategies are considered: RPLC on C18 phase but with different mobile phase composition (acidic or basic), RPLC with a pentafluorophenyl stationary phase, or mixed-mode HPLC with both bimodal and trimodal stationary phases. First, method performances were compared in terms of response rate (proportion of compounds eluted) and peak shapes for a large set of synthetic drugs (140) with structural diversity and their orthogonality was evaluated. Then a subset of compounds (25) containing varied impurity profiles was used to compare the methods based on the capability to detect impurities and evaluate the relative purity of the API.

Fragmentation studies of sartans by electrospray ionization mass spectrometry

Sartans and related analogues with 5-oxo-l, 2, 4-oxadiazole ring and tetrazole ring are investigated in detail using collision-induced dissociation (CID) method in positive ion mode by electrospray ionization tandem mass spectrometry (ESI-MSⁿ ). It is found that the protonated sartans and related analogues tend to form the N-substituted-3-substituted phenanthridin-6-amine ion which has a large conjugative structure. The possible fragmentation pathways were proposed for the first time, and the key structure of product ions was confirmed by high resolution tandem mass spectrometry and theoretical calculation. It is very helpful for understanding the intriguing roles of sartans analogues in fragmentation reactions and enriching the knowledge of the gas-phase chemistry of the oxadiazole and tetrazole ring. Copyright © 2017 John Wiley & Sons, Ltd.

Impurities in Drug Products and Active Pharmaceutical Ingredients

Analytical methods should be selective and fast. In modern times, scientists strive to meet the criteria of green chemistry, so they choose analytical procedures that are as short as possible and use the least toxic solvents. It is quite obvious that the products intended for human consumption should be characterized as completely as possible. The safety of a drug is dependent mainly on the impurities that it contains. High pressure liquid chromatography and ultra-high pressure liquid chromatography have been proposed as the main techniques for forced degradation and impurity profiling. The aim of this article was to characterize the relevant classification of drug impurities and to review the methods of impurities determination for atorvastatin (ATV) and duloxetine (DLX) (both in active pharmaceutical ingredients and in different dosage forms). These drugs have an impact on two systems of the human body: cardiac and nervous. Simple characteristics of ATV and DLX, their properties and specificity of action on the human body, are also included in this review. The analyzed pharmaceuticals-ATV (brand name Lipiron) and DLX (brand name Cymbalta)-were selected for this study based on annual rankings prepared by Information Medical Statistics.

Application of an Untargeted Chemometric Strategy in the Impurity Profiling of Pharmaceuticals: An Example of Amisulpride

The untargeted chemometric methodology for the impurity profiling of amisulpride pharmaceutical formulations was successfully applied and developed. For this purpose a fast, accurate and specific analytical method was elaborated with the use of ultra high pressure liquid chromatography coupled with high resolution hybrid electrospray ionization quadrupole time of flight mass spectrometer in a fast polarity switching mode. All the obtained chromatographic profiles were aligned and a multivariate chemometric analysis including principal component analysis and partial least square (PLS) was performed. The developed PLS-DA pattern recognition model allowed the identification of all the analyzed pharmaceutical formulations of amisulpride as well as their manufacturers. Additionally, six impurities of amisulpride were identified by the use of MS/MS fragmentation and one of them was found as the main impurity (Imp-1) and can be regarded as the primary impurity "marker" for the analyzed formulations. Furthermore, one new impurity of amisulpride was found and its chemical structure was proposed (4-amino-5-(ethylsulfinyl)-2-methoxy-N-[(1-ethylpyrrolidin-2-yl)methyl]benzamide).

A Simple and Improved HPLC-PDA Method for Simultaneous Estimation of Fexofenadine and Pseudoephedrine in Extended Release Tablets by Response Surface Methodology

A simple RP-HPLC method has been developed for simultaneous estimation of fexofenadine and pseudoephedrine in their extended release tablet. The method was developed based on statistical design of experiments (DoE) and Response Surface Methodology. Separation was achieved on double end-capped C18 column (250 mm × 4 mm, 5 μm). In this experiment, two components of mobile phase, namely, acetonitrile (% v/v) and methanol (% v/v), were the factors whereas retention and resolution of the chromatographic peaks were the responses. The effects of different composition of factors on the corresponding responses were investigated. The optimum chromatographic condition for the current case was found as an isocratic mobile phase consisting of 20 mM phosphate buffer (pH 6.8) and acetonitrile and methanol in a ratio of 50 : 36 : 14 (% v/v) at a flow rate of 1 mL/min for 7 minutes. The retention of pseudoephedrine and fexofenadine was found to be 2.6 min and 4.7 min, respectively. The method was validated according to the ICH and FDA guidelines and various validation parameters were determined. Also, forced degradation studies in acid, base, oxidation, and reduction media and in thermal condition were performed to establish specificity and stability-indicating property of this method. Practical applicability of this method was checked in extended release tablets available in Bangladeshi market.

Development and Validation of Miglitol and Its Impurities by RP-HPLC and Characterization Using Mass Spectrometry Techniques

Alpha glucoside inhibitors used to treat type-2 diabetes mellitus (DM) are likely to be safe and effective. These agents are most effective for postprandial hyperglycemia. Miglitol is a type of drug used to treat type-2 DM. A simple, selective, linear, precise and accurate reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for a related substance of miglitol and its identification, and characterization was done by different mass spectrometry techniques. The gradient method at a flow rate of 1.0 mL/min was employed on a prevail carbohydrate ES column (250 × 4.6 mm, 5 μm particle size) at a temperature of 35 °C. Mobile phase A consisted of 10 mM dipotassium hydrogen orthophosphate adjusted to pH 8.0 using concentrated phosphoric acid and mobile phase B consisted of acetonitrile. The ultraviolet detection wavelength was 210 nm and 20 μL of the sample were injected. The retention time for miglitol was about 24.0 min. Forced degradation of the miglitol sample was conducted in accordance with the International Conference on Harmonisation (ICH) guidelines. Acidic, basic, neutral, and oxidative hydrolysis, thermal stress, and photolytic degradation were used to assess the stability-indicating the power of the method. Substantial degradation was observed during oxidative hydrolysis. No degradation was observed under the other stress conditions. The method was optimized using samples generated by forced degradation and sample solutions spiked with impurities and epimers. Good resolution of the analyte peak from peaks, corresponding to process-related impurities, epimers and degradation products, was achieved and the method was validated as per the ICH guidelines. The method can successfully be applied for routine analysis of miglitol.

Pharmaceutical impurities and degradation products: uses and applications of NMR techniques

Current standards and regulations demand the pharmaceutical industry not only to produce highly pure drug substances, but to achieve a thorough understanding of the impurities accompanying their manufactured drug substances and products. These challenges have become important goals of process chemistry and have steadily stimulated the search of impurities after accelerated or forced degradation procedures. As a result, impurity profiling is one of the most attractive, active and relevant fields of modern pharmaceutical analysis. This activity includes the identification, structural elucidation and quantitative determination of impurities and degradation products in bulk drugs and their pharmaceutical formulations. Nuclear magnetic resonance (NMR) spectroscopy has evolved into an irreplaceable approach for pharmaceutical quality assessment, currently playing a critical role in unequivocal structure identification as well as structural confirmation (qualitative detection), enabling the understanding of the underlying mechanisms of the formation of process and/or degradation impurities. NMR is able to provide qualitative information without the need of standards of the unknown compounds and multiple components can be quantified in a complex sample without previous separation. When coupled to separative techniques, the resulting hyphenated methodologies enhance the analytical power of this spectroscopy to previously unknown levels. As a result, and by enabling the implementation of rational decisions regarding the identity and level of impurities, NMR contributes to the goal of making better and safer medicines. Herein are discussed the applications of NMR spectroscopy and its hyphenated derivate techniques to the study of a wide range pharmaceutical impurities. Details on the advantages and disadvantages of the methodology and well as specific challenges with regards to the different analytical problems are also presented.

Analysis of Sartans: a review

The risk of cardiovascular diseases is closely related to hypertension, high cholesterol levels, and diabetes. When these risk factors appear together they are referred to as a metabolic syndrome. In the treatment of cardiovascular diseases, a combination of antihypertensive, hypolipemiant, and antidiabetic drugs is often applied. Diuretics (chlortalidone, hydrochlorothiazide, etc.) and angiotensin II receptors antagonist (sartans) are used to control hypertension, whereas statins (fluvastatin, simvastatin, etc.) are used to reduce cholesterol levels. This review is concerned with methods for the analysis of sartans in various matrices, such as pharmaceutical formulations, environmental and biological samples, and discusses the current status of stability studies of sartans . It also presents analytical methods for the simultaneous determination of sartans, diuretics, and statins.

Development and validation of a stability-indicating high performance liquid chromatographic (HPLC) method for the determination of related substances of micafungin sodium in drug substances

An isocratic, sensitive and stability-indicating high performance liquid chromatographic (HPLC) method for separation and determination of the related substances of micafungin sodium was developed. The chromatographic separation was achieved on Agilent Zorbax SB-C18 column (250 × 4.6 mm, 5 μm). Forced degradation study confirmed that the newly developed method was specific and selective to the degradation products. The performance of the method was validated according to the present ICH guidelines for specificity, linearity, accuracy, precision and robustness. Regression analysis showed correlation coefficient value greater than 0.999 for micafungin sodium and its six impurities. Limit of detection of impurities was in the range of 0.006%-0.013% indicating the high sensitivity of the newly developed method. Accuracy of the method was established based on the recovery obtained between 98.2% and 102.0% for all impurities. RSD obtained for the repeatability and intermediate precision experiments, was less than 1.0%. The method was successfully applied to quantify related substances of micafungin sodium in bulk drugs.