Critical factors determining inactivation kinetics by pulsed electric field food processing

Inactivation activity and mechanism of high-voltage pulsed electric fields combined with antibacterial agents against Alicyclobacillus spp. in apple juice

Alicyclobacillus spp. are crucial factors affecting the quality of fruit juice, so it is very important to control their contamination. In this study, the inactivation activity and mechanism of high-voltage pulsed electric fields (HVPEF) combined with antibacterial agents against Alicyclobacillus spp. in apple juice were investigated. It was found that under the optimal conditions of electric field strength 9.6 kV/cm, treatment time 20 min, frequency 1000 Hz, and duty ratio 50 %, HVPEF treatment could reduce bacteria by 1.89-4.76 log CFU/mL. Moreover, the inactivation activities of six antibacterial agents (propyl paraben, glycerol monocaprate, octyl gallate, heptyl paraben, nisin, carvacrol) alone and their combination with HVPEF were further investigated. The results showed that with the combined treatment, the minimum bactericidal concentrations of carvacrol, nisin, and heptyl paraben were reduced by >50 % to 1 mg/mL, 10 IU/mL, and 0.02 mg/mL, respectively. Based on this, the most resistant strain of A. acidoterrestris (DSM 3922) was identified to elucidate the inactivation mechanism. It was demonstrated that the antibacterial process could alter the permeability and fatty acid composition of the cell membrane, causing the cells to deform and shrink, leading to leakage of intracellular proteins, and also affect the synthesis of ROS and ATP, ultimately resulting in bacterial death. In addition, the various treatments had no significant effect on the soluble solids content, titratable acid, soluble sugar content, organic acids and aroma components of apple juice. The combination of HVPEF treatment and antibacterial agents could effectively maintain the quality of apple juice.

Effect of novel and conventional food processing technologies on Bacillus cereus spores

This chapter provides a summary of the effect of thermal and non-thermal processing technologies on Bacillus cereus spores, a well-known pathogenic bacterium associated with foodborne illnesses. B. cereus has been frequently detected in rice, milk products, infant food, liquid eggs products and meat products all over the world. This Gram positive, rod-shaped, facultative anaerobe can produce endospores that can withstand pasteurization, UV radiation, and chemical reagents commonly used for sanitization. B. cereus spores can germinate into vegetative cells that can produce toxins. The conventional regime for eliminating spores from food is retorting which uses the application of high temperature (121 °C). However, at this temperature, there could be a significant amount of loss in the organoleptic and functional qualities of the food components, especially proteins. This leads to the research on the preventive measures against germination and if possible, to reduce the resistance before using a non-thermal technology (temperatures less than retorting-121 °C) for inactivation. This chapter reviews the development and success of several food processing technologies in their ability to inactivate B. cereus spores in food.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation

BACKGROUND

Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization.

SCOPE AND APPROACH

This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed.

KEY FINDINGS AND CONCLUSIONS

The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Polyphenols: Natural Preservatives with Promising Applications in Food, Cosmetics and Pharma Industries; Problems and Toxicity Associated with Synthetic Preservatives; Impact of Misleading Advertisements; Recent Trends in Preservation and Legislation

The global market of food, cosmetics, and pharmaceutical products requires continuous tracking of harmful ingredients and microbial contamination for the sake of the safety of both products and consumers as these products greatly dominate the consumer's health, directly or indirectly. The existence, survival, and growth of microorganisms in the product may lead to physicochemical degradation or spoilage and may infect the consumer at another end. It has become a challenge for industries to produce a product that is safe, self-stable, and has high nutritional value, as many factors such as physical, chemical, enzymatic, or microbial activities are responsible for causing spoilage to the product within the due course of time. Thus, preservatives are added to retain the virtue of the product to ensure its safety for the consumer. Nowadays, the use of synthetic/artificial preservatives has become common and has not been widely accepted by consumers as they are aware of the fact that exposure to preservatives can lead to adverse effects on health, which is a major area of concern for researchers. Naturally occurring phenolic compounds appear to be extensively used as bio-preservatives to prolong the shelf life of the finished product. Based on the convincing shreds of evidence reported in the literature, it is suggested that phenolic compounds and their derivatives have massive potential to be investigated for the development of new moieties and are proven to be promising drug molecules. The objective of this article is to provide an overview of the significant role of phenolic compounds and their derivatives in the preservation of perishable products from microbial attack due to their exclusive antioxidant and free radical scavenging properties and the problems associated with the use of synthetic preservatives in pharmaceutical products. This article also analyzes the recent trends in preservation along with technical norms that regulate the food, cosmetic, and pharmaceutical products in the developing countries.

Comprehensive review on pulsed electric field in food preservation: gaps in current studies for potential future research

In pulsed electric field (PEF) method sources of high voltage pulses are placed amid two electrodes in to fluid or paste type foods. Electricity is passed between two electrodes to sterilize the food. Almost all PEF technology entails the use of this technology in milk and milk product processing, eggs, poultry, juices and other liquid foods to prevent microorganisms. PEF technology, one of the promising methods of non-thermal preservation of food, can address the biological hazards efficiently. Recently available research papers explored PEF technology not only to facilitate the inactivation of microorganisms but also to alleviate the pressing competence for juice extraction purpose from plants for food application and also to intensify the drying and dehydration process of food. Most of the literatures are available on killing of microorganisms using PEF technology but the reports on influence of PEF technology on quality parameters of food after treatment and about their acceptability are limited. Now the technology is becoming popular and many recent papers reported about better yield and excellent quality of nutrient extracted by using PEF technology.

Insulated Interlaced Surface Electrodes for Bacterial Inactivation and Detachment

Effective and stable antibiofouling surfaces and interfaces have long been of research interest. In this study, we designed, fabricated, and evaluated a surface coated with insulated interlaced electrodes for bacterial fouling reduction. The electrodes were printed Ag filaments of 100 μm width and 400 μm spacing over an area of 2 × 2 cm². The insulating Ag electrode coating material was polydimethylsiloxane (PDMS) or thermoplastic polyurethane (TPU) with a thickness of 10 to 40 μm. To evaluate the antibiofouling potential, E. coli inactivation after 2 min contact with the electrified surface and P. fluorescens detachment after 15 and 40 h growth were examined. The extent of bacterial inactivation was related to the insulating material, coating thickness, and applied voltage (magnitude and AC vs DC). A high bacterial inactivation (>98%) was achieved after only 2 min of treatment at 50 V AC and 10 kHz using a 10 μm TPU coating. P. fluorescens detachment after 15 and 40 h incubation in the absence of applied potential was completed with simultaneous cross-flow rinsing and AC application. Higher AC voltages and longer cross-flow rinsing times resulted in greater bacterial detachment with bacterial coverage able to be reduced to <1% after only 2 min of rinsing at 50 V AC and 10 kHz. Theoretical electric field analysis indicated that at 10 V the field strength penetrating the aqueous solution is nonuniform (∼16,000-20,000 V m^-1 for the 20 μm TPU) and suggests that dielectrophoresis plays a key role in bacterial detachment. The bacterial inactivation and detachment trends observed in this study indicate that this technique has merit for future antibiofouling surface development.

Advances in pulsed electric stimuli as a physical method for treating liquid foods

There is a need for alternative technologies that can deliver safe and nutritious foods at lower costs as compared to conventional processes. Pulsed electric field (PEF) technology has been utilised for a plethora of different applications in the life and physical sciences, such as gene/drug delivery in medicine and extraction of bioactive compounds in food science and technology. PEF technology for treating liquid foods involves engineering principles to develop the equipment, and quantitative biochemistry and microbiology techniques to validate the process. There are numerous challenges to address for its application in liquid foods such as the 5-log pathogen reduction target in food safety, maintaining the food quality, and scale up of this physical approach for industrial integration. Here, we present the engineering principles associated with pulsed electric fields, related inactivation models of microorganisms, electroporation and electropermeabilization theory, to increase the quality and safety of liquid foods; including water, milk, beer, wine, fruit juices, cider, and liquid eggs. Ultimately, we discuss the outlook of the field and emphasise research gaps.

Microbial Decontamination of Red Wine by Pulsed Electric Fields (PEF) after Alcoholic and Malolactic Fermentation: Effect on Saccharomyces cerevisiae, Oenococcus oeni, and Oenological Parameters during Storage

New techniques are required to replace the use of sulfur dioxide (SO₂) or of sterilizing filtration in wineries, due to those methods' drawbacks. Pulsed electric fields (PEF) is a technology capable of inactivating microorganisms at low temperatures in a continuous flow with no detrimental effect on food properties. In the present study, PEF technology was evaluated for purposes of microbial decontamination of red wines after alcoholic and malolactic fermentation, respectively. PEF combined with SO₂ was evaluated in terms of microbial stability and physicochemical parameters over a period of four months. Furthermore, the effect of PEF on the sensory properties of red wine was compared with the sterilizing filtration method. Results showed that up to 4.0 Log₁₀ cycles of S. cerevisiae and O. oeni could be eradicated by PEF and sublethal damages and a synergetic effect with SO₂ were also observed, respectively. After 4 months, wine treated by PEF after alcoholic fermentation was free of viable yeasts; and less than 100 CFU/mL of O. oeni cells were viable in PEF-treated wine added with 20 ppm of SO₂ after malolactic fermentation. No detrimental qualities were found, neither in terms of oenological parameters, nor in the sensory parameters of wines subjected to PEF after storage time.

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10^-3 -4.0 × 10^-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

Understanding the effect of meat electrical conductivity on Pulsed Electric Field (PEF) process parameters and the ability of PEF to enhance the quality and shorten sous vide processing for beef short ribs

The aim of this research was to investigate how the electrical conductivity of short ribs affected Pulsed Electric Field (PEF) process parameters and the ability of PEF to enhance their quality and reduce sous vide (SV) processing time. Short ribs with different range of electrical conductivity (3-6, 6-9, and 9-12 mS/cm) values were treated using input voltage of 10 kV, pulse width of 20 µs, pulse frequency of 50 Hz and pulse number, of either 1600 (low intensity PEF/LPEF) or 5200 (high intensity PEF/HPEF), followed by SV processing at 60 °C for either 24 or 36 h. The quality parameters assessed were cooking loss (%), Texture Profile Analysis (TPA) parameters, and Commission Internationale d'Eclairage (CIE) L*a*b* colour parameters. There was a variation in electrical conductivity of short ribs according to the position of the bone in the short rib, which demonstrated good congruence with the distribution of fat and connective tissue. SV processing with or without PEF pre-treatment did not have a significant effect (p > 0.05) on cooking loss or CIE L*a*b* colour parameters. Short ribs with a medium conductivity (6-9 mS/cm) had a significantly lower hardness after high intensity PEF followed by SV for 24 h, whilst short ribs with an average conductivity of 3-6 and 9-12 mS/cm required longer SV time (up to 36 h) and had a significantly lower hardness compared to non PEF pre-treated samples. TPA values of short ribs treated with the same PEF intensity and SV processing parameters were comparable regardless of the short ribs initial electrical conductivity, which indicates that PEF treatment could ameliorate the biological electrochemical variability inherent to short ribs and PEF could be the potential tool to decrease their SV processing time and enhance their tenderness.

Disintegration of sewage sludge using pulsed electrical field technique: PEF optimization, simulation, and anaerobic digestion

A Pulsed Electrical Field (PEF) reactor was developed to process biological sludge as a pretreatment method prior to anaerobic digestion. This study focuses on the effects of operational parameters such as applied voltage, pH, conductivity, flow-rate, and temperature affecting the treatment of waste active sludge (WAS) by PEF, the simulation of reactor process conditions and anaerobic biodegradation of PEF pretreated sludge. The effects of the sludge conductivity, flow-rate, and temperature on the Soluble Chemical Oxygen Demand (SCOD) of WAS treated by PEF reactor were investigated by using a Box-Wilson statistical experiment design. Simulations of the PEF process conditions were performed to verify experimental results. After PEF optimization study, the PEF operational conditions for maximum SCOD were obtained at 4 mS/cm conductivity, 5 mL/min flow-rate, and 40 °C temperature during PEF treatment. The measured and predicted SCOD showed a good consistency (R²= 0.92). After it was pretreated by the PEF, the SCOD, total nitrogen, total phosphorus, polysaccharide and protein contents of WAS increased. However filterability property also decreased. In the anaerobic digestion study, the reactor fed with the PEF pretreated WAS provided 1.70 times higher methane production compared with raw sludge. In addition to this situation, 18% and 19% improvements, respectively, were observed in SCOD and VSS reductions when it was compared with raw sludge in the 23 days of anaerobic operation. Sixteen percent decrease in CST showed that the PEF enhanced the filterability of WAS during the anaerobic stabilization.

Effect of Moderate Intensity Pulsed Electric Field on Shelf-life of Chicken Breast Meat

Moderate intensity pulsed electric field (MIPEF) is a fairly new research topic for microbial inactivation on muscle foods. In this study, indirect application of MIPEF (2.5 kV/cm, 4.67 kV/cm, 7 kV/cm) was evaluated in terms of the growth of some pathogenic bacteria and the quality characteristics of chicken breast meat during cold storage (4°C). Broth cultures of E. coli and C. jejuni showed a remarkable resistance to MIPEF under 4.67 kV/cm and 7 kV/cm, respectively. The limit for total mesophilic aerobic bacteria (TMAB) count was exceeded in 4.67 and 7 kV/cm applied groups 2 days later than control (C). In the end, almost 2 log differences were determined for total coliform bacteria in 4.67 and 7 kV/cm applied groups as compared to C (p<0.05). Inoculated P. aeruginosa count remained the same whereas L. monocytogenes growth was promoted by 4.67 kV/cm (p<0.05). pH value, CIE L*, b*, C* color values of chicken breast fillets were not affected by MIPEF application while ΔE values showed the maximum change in the C group. This study demonstrated that improved shelf-life of chicken breast fillets was provided by moderate intensity DC-pulses in combination with cold storage.

Enhancement of Polyphenols Recovery from Rosa canina, Calendula officinalis and Castanea sativa Using Pulsed Electric Field

The current study evaluates the Pulsed Electric Field (PEF) technique for the extraction of polyphenols from the plants Rosa canina, Calendulaofficinalis and Castanea sativa. These plants are traditionally used both for the preparation of therapeutic decoctions and the aromatization of beverages (alcoholic or not). Pulses of 10 μs duration were used to apply electric field intensities ranging from 1.2 to 2.0 kV cm−1. The period of the phenomenon was set to 1 ms, with a total extraction time of 20 min. The total polyphenol content as well as the identified polyphenolic compounds of the extracts were determined for monitoring and evaluation. To estimate the PEF effect, control extracts were prepared using the same process as PEF extracts but without the application of electric field. For all the three plant materials studied, the PEF technique appeared to be successful in increasing polyphenols extraction. The application of a moderate to high electric field, up to 1.4 kV cm−1, resulted in increased total and individual polyphenols recovery, reaching 63.79% and 84%, respectively, in the case of Rosa canina fruits.

Evaluation of Pulsed Electric Field Polyphenol Extraction from Vitis vinifera, Sideritis scardica and Crocus sativus

This study exploited the application of pulsed electric field (PEF) on the recovery of polyphenols from aerial parts of Sideritis scardica, tepals of Crocus sativus, and fruits of Vitis vinifera. Short pulses of 10 μs in a period of 1 ms were applied to the plant material, while different electric field intensities, 1.2 to 2.0 kV/cm were tested to optimize the procedure. The content in total polyphenols and the polyphenolic profile of the plant extracts were evaluated. Along with PEF samples, control samples were prepared for comparison. PEF treatment enhanced the recovery in total polyphenols for all the three plants examined. A significant increase was noticed in each plant tested and PEF condition applied, though lower electric field intensities up to 1.4 kV/cm proved to be more effective. Under the optimum electric field intensities, 1.4 kV/cm for V. vinifera and 1.2 kV/cm for S. scardica and C. sativus, increases of 49.15%, 35.25%, and 44.36% in total polyphenol content, respectively, were achieved. Additionally, an 85% increase of quercetin 3-rutinoside for V. vinifera, a 56% of apigenin 7-O-glucoside for S. scardica, and a 64% increase for kaempferol 3-O-glucoside for C. sativus were obtained.

Advantages and limitations of various treatment chamber designs for reversible and irreversible electroporation in life sciences

The fundamental mechanisms of pulsed electric fields on biological cells are not yet fully elucidated, though it is apparent that membrane electroporation plays a crucial role. Little is known about treatment-chamber-specific effects, and systematic studies are scarce. Thus, the present study evaluates the (dis-)advantages of various treatment chamber designs for liquid applications at differing scales. Three chambers, namely parallel plate microfluidic (V̇: 0.1 ml/min; titanium electrodes), co-linear meso (V̇: 5.0 ml/min; stainless steel electrodes), and co-linear macro (V̇: 83.3 ml/min; stainless steel electrodes) chambers, were studied. Electroporation effects on Escherichia coli in media with 0.1-10.0 mS/cm were evaluated by plate counts and flow cytometry at 8, 16, and 20 kV/cm. For the microfluidic chamber, predominantly irreversible electroporation (2.5 logs₁₀ reductions) was seen at 0.1 mS/cm, while high irreversible electroporation (4.2 logs₁₀ reductions) at 10.0 mS/cm was observed for the macro chamber. The meso chamber indicated a similar trend towards increased conductivity, even though only low inactivation levels were present. Variation in conductivity and electrode configuration or area likely induces effects resulting in distinct electroporation levels, as observed for the micro and macro chamber. Suitable application scenarios, depending on targeted electroporation effects, were suggested.

Guidance on validation of lethal control measures for foodborne pathogens in foods

Food manufacturers are required to obtain scientific and technical evidence that a control measure or combination of control measures is capable of reducing a significant hazard to an acceptable level that does not pose a public health risk under normal conditions of distribution and storage. A validation study provides evidence that a control measure is capable of controlling the identified hazard under a worst-case scenario for process and product parameters tested. It also defines the critical parameters that must be controlled, monitored, and verified during processing. This review document is intended as guidance for the food industry to support appropriate validation studies, and aims to limit methodological discrepancies in validation studies that can occur among food safety professionals, consultants, and third-party laboratories. The document describes product and process factors that are essential when designing a validation study, and gives selection criteria for identifying an appropriate target pathogen or surrogate organism for a food product and process validation. Guidance is provided for approaches to evaluate available microbiological data for the target pathogen or surrogate organism in the product type of interest that can serve as part of the weight of evidence to support a validation study. The document intends to help food manufacturers, processors, and food safety professionals to better understand, plan, and perform validation studies by offering an overview of the choices and key technical elements of a validation plan, the necessary preparations including assembling the validation team and establishing prerequisite programs, and the elements of a validation report.

Effects of Pulsed Electric Fields and Ultrasound Processing on Proteins and Enzymes: A Review

There is increasing demand among consumers for food products free of chemical preservatives, minimally processed and have fresh-like natural flavors. To meet these growing demands, the industries and researchers are finding alternative processing methods, which involve nonthermal methods to obtain a quality product that meets the consumer demands and adheres to the food safety protocols. In the past two decades’ various research groups have developed a wide range of nonthermal processing methods, of which few have shown potential in replacing the traditional thermal processing systems. Among all the methods, ultrasonication (US) and pulsed electric field (PEF) seem to be the most effective in attaining desirable food products. Several researchers have shown that these methods significantly affect various major and minor nutritional components present in food, including proteins and enzymes. In this review, we are going to discuss the effect of nonthermal methods on proteins, including enzymes. This review comprises results from the latest studies conducted from all over the world, which would help the research community and industry investigate the future pathway for nonthermal processing methods, especially in preserving the nutritional safety and integrity of the food.

Extraction of protein from food waste: An overview of current status and opportunities

The chief intent of this review is to explain the different extraction techniques and efficiencies for the recovery of protein from food waste (FW) sources. Although FW is not a new concept, increasing concerns about chronic hunger, nutritional deficiency, food security, and sustainability have intensified attention on alternative and sustainable sources of protein for food and feed. Initiatives to extract and utilize protein from FW on a commercial scale have been undertaken, mainly in the developed countries, but they remain largely underutilized and generally suited for low-quality products. The current analysis reveals the extraction of protein from FW is a many-sided (complex) issue, and that identifies for a stronger and extensive integration of diverse extraction perspectives, focusing on nutritional quality, yield, and functionality of the isolated protein as a valued recycled ingredient.

Strategies for Microbial Decontamination of Fresh Blueberries and Derived Products

Increasing consumption of blueberries is associated with appreciation of their organoleptic properties together with their multiple health benefits. The increasing number of outbreaks caused by pathogenic microorganisms associated with their consumption in the fresh state and the rapid spoilage of this product which is mainly caused by moulds, has led to the development and evaluation of alternatives that help mitigate this problem. This article presents different strategies ranging from chemical, physical and biological technologies to combined methods applied for microbial decontamination of fresh blueberries and derived products. Sanitizers such as peracetic acid (PAA), ozone (O3), and electrolyzed water (EOW), and physical technologies such as pulsed light (PL) and cold plasma (CP) are potential alternatives to the use of traditional chlorine. Likewise, high hydrostatic pressure (HHP) or pulsed electrical fields (PEF) successfully achieve microbial reductions in derivative products. A combination of methods at moderate intensities or levels is a promising strategy to increase microbial decontamination with a minimal impact on product quality.

Fate of Residual Pesticides in Fruit and Vegetable Waste (FVW) Processing

Plants need to be protected against pests and diseases, so as to assure an adequate production, and therefore to contribute to food security. However, some of the used pesticides are harmful compounds, and thus the right balance between the need to increase food production with the need to ensure the safety of people, food and the environment must be struck. In particular, when dealing with fruit and vegetable wastes, their content in agrochemicals should be monitored, especially in peel and skins, and eventually minimized before or during further processing to separate or concentrate bioactive compounds from it. The general objective of this review is to investigate initial levels of pesticide residues and their potential reduction through further processing for some of the most contaminated fruit and vegetable wastes. Focus will be placed on extraction and drying processes being amid the main processing steps used in the recuperation of bioactive compounds from fruit and vegetable wastes.

Temperature and presence of ethanol affect accumulation of intracellular trehalose in Lactobacillus plantarum WCFS1 upon pulsed electric field treatment

Pulsed electric field (PEF) treatment can be used to increase intracellular small molecule concentrations in bacteria, which can lead to enhanced robustness of these cells during further processing. In this study we investigated the effects of the PEF treatment temperature and the presence of 8% (v/v) ethanol in the PEF medium on cell survival, membrane fluidity and intracellular trehalose concentrations of Lactobacillus plantarum WCFS1. A moderate PEF treatment temperature of 21 °C resulted in a high cell survival combined with higher intracellular trehalose concentrations compared to a treatment at 10 and 35 °C. Interestingly, highest intracellular trehalose concentrations were observed upon supplementing the PEF medium with 8% ethanol, which resulted in more than a doubling in intracellular trehalose concentrations, while culture survival was retained. Overall, this study shows that treatment temperature and PEF medium optimization are important directions for improving molecule uptake upon PEF processing.

Review of the application of pulsed electric fields (PEF) technology for food processing in China

With the improvement of living standards, growing consumer demand for high-quality and natural foods has led to the development of new mild processes to enhance or replace conventional thermal and chemical methods for food processing. Pulsed electric fields (PEF) is an emerging and promising non-thermal food processing technology, which is ongoing from laboratory and pilot plant level to the industrial level. Chinese researchers have made tremendous advances in the potential applications of PEF for processing a wide range of food commodities over the last few years, which contributes to the current understanding and development of PEF technology. The objective of this paper is to conduct a systematic review on the achievements of PEF technology used for food processing in China and the corresponding processing principles. Research on the applicability of PEF in food processing suggests that PEF can be used alone or in combination with other methods, not only to inactivate microorganisms and extract active constituents, but also to modify biomacromolecules, enhance chemical reactions and accelerate the aging of fermented foods, which are mainly related to permeabilization of biomembranes, occurrence of electrochemical and electrolytic reactions, polarization and realignment of molecules, and reduction of activation energy of chemical reactions induced by PEF treatments. In addition, some of the most important challenges for the successful implementation of large-scale industrial applications of PEF technology in the food industry are discussed. The results bring out the benefits of both researchers and the industry.

Understanding the occurrence of tailing in survival curves of Salmonella Typhimurium treated by pulsed electric fields

This study aimed to gain more in-depth knowledge of the mechanisms involved in microbial inactivation by pulsed electric fields (PEF) to understand the tailing observed in survival curves of Salmonella Typhimurium (STCC 878). The comparison of the inactivation achieved by the application of one train of pulses with those obtained with pulses applied in two trains shows that the tail of the survival curves was a consequence of a transient increment of the microbial resistance to the effect of the electric field in a proportion of the cells. After some time following the application of the first pulse train, cells became again sensitive to the second train, and tailing tended to disappear. The required time was highly dependent on the characteristics of the incubation medium. Similar effects were observed when the treatments were validated on whole milk and orange juice. This study has demonstrated by the first time on microbial cells the benefits of splitting the delivered PEF treatment in two trains with a period of delay between them. Therefore, this insight opens up the possibility of developing new strategies to achieve the required inactivation levels to guarantee food safety by moderate PEF treatments.

Endospore Inactivation by Emerging Technologies: A Review of Target Structures and Inactivation Mechanisms

Recent developments in preservation technologies allow for the delivery of food with nutritional value and superior taste. Of special interest are low-acid, shelf-stable foods in which the complete control or inactivation of bacterial endospores is the crucial step to ensure consumer safety. Relevant preservation methods can be classified into physicochemical or physical hurdles, and the latter can be subclassified into thermal and nonthermal processes. The underlying inactivation mechanisms for each of these physicochemical or physical processes impact different morphological or molecular structures essential for spore germination and integrity in the dormant state. This review provides an overview of distinct endospore defense mechanisms that affect emerging physical hurdles as well as which technologies address these mechanisms. The physical spore-inactivation technologies considered include thermal, dynamic, and isostatic high pressure and electromagnetic technologies, such as pulsed electric fields, UV light, cold atmospheric pressure plasma, and high- or low-energy electron beam.

Effect of Pulsed Electric Field-Assisted Process in Combination with Porcine Lipase on Defatting of Seabass Skin

Defatting of seabass skins using pulsed electric field (PEF)-assisted process at different electric field strengths (16 and 24 kV/cm) and times (36, 72, and 108 ms) in combination with porcine pancreas lipase (PPL) at 25 U/g dry matter was investigated. PEF-treated skin at 24 kV/cm for 72 ms followed by PPL treatment removed 86.93% lipids. PEF-treated skin was further optimized for lipid reduction by response surface methodology. Central composite design was adopted to establish treatments based on two independent variables, involving PPL concentration (30 to 55 U/g dry matter) and hydrolysis time (60 to 180 min). Second-order polynomial model was used for predicting the response. The highest lipid removal (91.96 ± 1.70%) was attained when the optimal condition (42.36 PPL units/g dry skin matter for 139.78 min) was used. The experiment value was in accordance with the predicted value. PEF-PPL-treated skin had lower monounsaturated and polyunsaturated fatty acids than the solvent-extracted skin (P < 0.05). When PEF-PPL-treated skin was hydrolyzed using papain at 0.30 U/g dry matter, lower fishy odor/flavor of resulting hydrolyzed collagen (PEF-PPL-HC) was found than other samples (P < 0.05). Lower total volatile compounds were also obtained in PEF-PPL-HC sample. Thus, the use of PEF pretreatment along with PPL before papain hydrolysis effectively prevented the formation of fishy odor/flavor in hydrolyzed collagen from seabass skin. PRACTICAL APPLICATION: Fishy odor/flavor caused by lipid oxidation of fish skin hydrolysates limits their applications in foods. Defatting process is the significant step for skin pretreatment. Although several methods could remove lipids from fish skins, either by lipase or solvent extraction, fishy odor/flavor is still detected in hydrolysate. Pulsed electric field-assisted process in combination with porcine lipase is another approach that can be used to enhance efficiency via electroporation, causing the loosened skin matrix and facilitating the migration of lipase into the skin. Consequently, the resulting hydrolysate might have the lowered fishy odor/flavor and could be used in foods, especially for fortification.

Pulsed Electric Field Extraction and Antioxidant Activity Determination of Moringa oleifera Dry Leaves: A Comparative Study with Other Extraction Techniques

The scope of this work was to determine the possibility of the application of the pulsed electric field (PEF) technique to the production of extracts from Moringa oleifera plant material (freeze-dried leaves). Various PEF conditions (pulse duration—PD; and pulse interval—PI) were tested. A field strength of 7 kV/cm was used. The total phenols in the extracts were evaluated by the Folin–Ciocalteu method and the antioxidant activity was evaluated by the radical scavenging activity (DPPH•), ferric reducing antioxidant power (FRAP) and Rancimat methods. The results were compared with those of the extracts obtained using other extraction techniques, namely microwave-assisted and ultrasound-assisted extractions, simple boiling water extraction, and plain maceration with water (as the control). The highest extraction of total phenols was achieved by the PEF procedure using 40 min treatment at a PD of 20 msec and a PI of 100 μsec. Additionally, all methods for the determination of the antioxidant activity showed that the activity of the extracts was proportional to the total phenol content. Concerning the PEF procedure, a low pulse duration with a high pulse interval is proposed in order to achieve higher extraction efficiency.

Pulsed electric field (PEF) technology for microbial inactivation in low-alcohol red wine

The decontamination of spoilage-related microbes in low-alcohol red wine was performed using a serial multiple electrode pulsed electric field (PEF) treatment system. The system consisted of seven electrodes connected in series, and it has been designed to produce square-wave high-voltage pulses of 1 μs duration at various electric field strengths and frequencies for decontamination. The initial counts of aerobic bacteria, yeast and lactic acid bacteria (spoilage-associated microbes) in the wine were 5.56, 5.61 and 5.22 log CFU/mL, respectively. The pattern of decontamination of the spoilage microorganisms followed first-order kinetics and the decontamination effect increased as the field strength and frequency increases. DHz and DPEF values were inversely related to the electric field strength of the PEF treatment. The yeast exhibited relatively low DPEF-value than the aerobic and lactic acid bacteria. The lowest ZPEF-value was observed for the lactic acid bacteria (24.6 kV/cm) among the spoilage microbes.

Resistance of Listeria monocytogenes to Stress Conditions Encountered in Food and Food Processing Environments

Listeria monocytogenes is a human food-borne facultative intracellular pathogen that is resistant to a wide range of stress conditions. As a consequence, L. monocytogenes is extremely difficult to control along the entire food chain from production to storage and consumption. Frequent and recent outbreaks of L. monocytogenes infections illustrate that current measures of decontamination and preservation are suboptimal to control L. monocytogenes in food. In order to develop efficient measures to prevent contamination during processing and control growth during storage of food it is crucial to understand the mechanisms utilized by L. monocytogenes to tolerate the stress conditions in food matrices and food processing environments. Food-related stress conditions encountered by L. monocytogenes along the food chain are acidity, oxidative and osmotic stress, low or high temperatures, presence of bacteriocins and other preserving additives, and stresses as a consequence of applying alternative decontamination and preservation technologies such high hydrostatic pressure, pulsed and continuous UV light, pulsed electric fields (PEF). This review is aimed at providing a summary of the current knowledge on the response of L. monocytogenes toward these stresses and the mechanisms of stress resistance employed by this important food-borne bacterium. Circumstances when L. monocytogenes cells become more sensitive or more resistant are mentioned and existence of a cross-resistance when multiple stresses are present is pointed out.

Overcoming Antimicrobial Resistance in Bacteria Using Bioactive Magnetic Nanoparticles and Pulsed Electromagnetic Fields

Nisin is a known bacteriocin, which exhibits a wide spectrum of antimicrobial activity, while commonly being inefficient against Gram-negative bacteria. In this work, we present a proof of concept of novel antimicrobial methodology using targeted magnetic nisin-loaded nano-carriers [iron oxide nanoparticles (NPs) (11-13 nm) capped with citric, ascorbic, and gallic acids], which are activated by high pulsed electric and electromagnetic fields allowing to overcome the nisin-resistance of bacteria. As a cell model the Gram-positive bacteria Bacillus subtilis and Gram-negative Escherichia coli were used. We have applied 10 and 30 kV cm-1 electric field pulses (100 μs × 8) separately and in combination with two pulsed magnetic field protocols: (1) high dB/dt 3.3 T × 50 and (2) 10 mT, 100 kHz, 2 min protocol to induce additional permeabilization and local magnetic hyperthermia. We have shown that the high dB/dt pulsed magnetic fields increase the antimicrobial efficiency of nisin NPs similar to electroporation or magnetic hyperthermia methods and a synergistic treatment is also possible. The results of our work are promising for the development of new methods for treatment of the drug-resistant foodborne pathogens to minimize the risks of invasive infections.

Energy consumption and water-soluble protein release by cell wall disruption of Nannochloropsis gaditana

Several cell disruption methods were tested on Nannochloropsis gaditana, to evaluate their efficiency in terms of cell disintegration, energy input and release of soluble proteins. High-pressure homogenization (HPH) and bead milling were the most efficient with >95% cell disintegration, ±50% (w/w) release of total proteins and low energy input (<0.5kWh.kg^-1_biomass). Enzymatic treatment required low energy input (<0.34kWh.kg^-1_biomass), but it only released ±35% protein (w/w). Pulsed Electric Field (PEF) was neither energy-efficient (10.44kWh.kg^-1_biomass) nor successful for protein release (only 10% proteins w/w) and cell disintegration. The release of proteins after applying HPH and bead milling always required less intensive operating conditions for cell disruption. The energy cost per unit of released protein ranged from 0.15-0.25 €.kg_Protein^-1 in case of HPH, and up to 2-20 €.kg_Protein^-1 in case of PEF.

Modular Serial Flow Through device for pulsed electric field treatment of the liquid samples

In biotechnology, medicine, and food processing, simple and reliable methods for cell membrane permeabilization are required for drug/gene delivery into the cells or for the inactivation of undesired microorganisms. Pulsed electric field treatment is among the most promising methods enabling both aims. The drawback in current technology is controllable large volume operation. To address this challenge, we have developed an experimental setup for flow through electroporation with online regulation of the flow rate with feedback control. We have designed a modular serial flow-through co-linear chamber with a smooth inner surface, the uniform cross-section geometry through the majority of the system’s length, and the mesh in contact with the electrodes, which provides uniform electric field distribution and fluid velocity equilibration. The cylindrical cross-section of the chamber prevents arching at the active treatment region. We used mathematical modeling for the evaluation of electric field distribution and the flow profile in the active region. The system was tested for the inactivation of Escherichia coli. We compared two flow-through chambers and used a static chamber as a reference. The experiments were performed under identical experimental condition (product and similar process parameters). The data were analyzed in terms of inactivation efficiency and specific energy consumption.