Optical organophosphorus biosensor consisting of acetylcholinesterase/viologen hetero Langmuir-Blodgett film

Using Carbon Nanotubes to Improve Enzyme Activity and Electroactivity of Fatty Acid Langmuir-Blodgett Film-Incorporated Galactose Oxidase for Sensing and Energy Storage Applications

Incorporating enzymes into nanostructured supercapacitor devices represents a groundbreaking advancement in energy storage. Enzyme catalysis using nanomaterials enhances performance, efficiency, and stability by facilitating precise charge transfer, while the nanostructure provides a high surface area and improved conductivity. This synergy yields eco-friendly, high-performance energy storage solutions crucial for diverse applications, from portable electronics to renewable energy systems. In this study, we harnessed the versatility of Langmuir-Blodgett films to create meticulously organized thin films with specific enzyme properties, coupled with carbon nanotubes, to develop biosupercapacitors. Langmuir monolayers were constructed with stearic acid, carbon nanotubes, and galactose oxidase. Following comprehensive characterization using tensiometric, rheological, morphological, and spectroscopic techniques, the monolayers were transferred to solid supports, yielding Langmuir-Blodgett films. These films exhibited superior performance, with persisting enzyme activity. However, increasing film thickness did not enhance enzymatic activity values, indicating a surface-driven process. Subsequently, we explored the electrochemical properties of the films, revealing stability compatible with supercapacitor applications. The introduction of carbon nanotubes demonstrated a higher capacitance, indicating the potential viability of the films for energy storage applications.

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Conjugated Polymers Blended with Lipids and Galactosidase as Langmuir-Blodgett Films To Control the Biosensing Properties of Nanostructured Surfaces

The structure of enzymes must be conserved when incorporated in nanoelectronic devices because their activity determines the function of the device as sensors. Among the systems that can retain their conformational structures, Langmuir-Blodgett (LB) films can be useful to exploit the construction of bioelectronic devices organized at the molecular level because biological and polymeric materials can be coupled as ultrathin films for biosensors and actuators. In this paper, we immobilized a β-galactosidase enzyme in the LB films of stearic acid and the conjugated polymer poly[(9,9-dioctylfluorene)- co-thiophene]. After the characterization of the floating films using tensiometry, vibrational spectroscopy, and Brewster angle microscopy, they were transferred to solid supports as LB films, and the catalytic activity of the enzyme could be preserved as analyzed using UV-vis spectroscopy. We noted that the presence of a supramolecular structure formed in the LB films not only conserved the enzyme activity but also exhibited regular and distinctive output signals in all molecular architectures employed in this work. These results are related to the synergism between the compounds on the active layer associated with a surface morphology that facilitated the analyte diffusion because of an adequate molecular accommodation of all components. This work then demonstrates the viability of employing LB films composed of lipids, enzymes, and synthetic polymers as devices for biosensing applications.

Immobilized Enzymes in Biosensor Applications

Enzyme-based biosensing devices have been extensively developed over the last few decades, and have proven to be innovative techniques in the qualitative and quantitative analysis of a variety of target substrates over a wide range of applications. Distinct advantages that enzyme-based biosensors provide, such as high sensitivity and specificity, portability, cost-effectiveness, and the possibilities for miniaturization and point-of-care diagnostic testing make them more and more attractive for research focused on clinical analysis, food safety control, or disease monitoring purposes. Therefore, this review article investigates the operating principle of enzymatic biosensors utilizing electrochemical, optical, thermistor, and piezoelectric measurement techniques and their applications in the literature, as well as approaches in improving the use of enzymes for biosensors.

Novel Biosensors for the Rapid Detection of Toxicants in Foods

The modern environmental and food analysis requires sensitive, accurate, and rapid methods. The growing field of biosensors represents an answer to this demand. Unfortunately, most biosensor systems have been tested only on distilled water or buffered solutions, although applications to real samples are increasingly appearing in recent years. In this context, biosensors for potential food applications continue to show advances in areas such as genetic modification of enzymes and microorganisms, improvement of recognition element immobilization, and sensor interfaces. This chapter investigates the progress in the development of biosensors for the rapid detection of food toxicants for online applications. Recent progress in nanotechnology has produced affordable, mass-produced devices, and to integrate these into components and systems (including portable ones) for mass market applications for food toxicants monitoring. Sensing includes chemical and microbiological food toxicants, such as toxins, insecticides, pesticides, herbicides, microorganisms, bacteria, viruses and other microorganisms, phenolic compounds, allergens, genetically modified foods, hormones, dioxins, etc. Therefore, the state of the art of recent advances and future targets in the development of biosensors for food monitoring is summarized as follows: biosensors for food analysis will be highly sensitive, selective, rapidly responding, real time, massively parallel, with no or minimum sample preparation, and platform suited to portable and handheld nanosensors for the rapid detection of food toxicants for online uses even by nonskilled personnel.

Fusion protein bilayer fabrication composed of recombinant azurin/cytochrome P450 by the sortase-mediated ligation method

Recently, the fabrication of protein bilayer has been required for the development of protein or enzyme complex formation. In the present study, we fabricated a fusion protein bilayer composed of recombinant azurin-cytochrome P450, which was synthesized by a site-specific sortase-mediated ligation method. The Pseudomonas aeruginosa azurin was modified by DNA recombinant technique, for enzymatic ligation and immobilization. The Pseudomonas putida cytochrome P450 was also modified for enzymatic ligation. The recombinant metalloproteins were conjugated via the sortase A. The conjugation was confirmed by SDS-PAGE and UV-vis. Then, the prepared fusion protein was immobilized on Au substrate, by the self-assembly method. The Azu-P450 (recombinant azurin-cytochrome P450) fusion protein layer was confirmed by AFM (Atomic Force Microscopy) and SERS (Surface-enhanced Raman Spectroscopy), to confirm the fusion protein bilayer orientation. Moreover, the electrochemical property of Azu-P450 was observed by cyclic voltammetry (CV). As a result, the Azu-P450 fusion protein bilayer shows good orientation on the Au substrate. Also, the original redox property of this fusion protein bilayer has been well maintained. The proposed fusion protein bilayer can.

Impact on enzyme activity as a new quality index of wastewater

The aim of this study was to define a new indicator for the quality of wastewaters that are released into the environment. A quality index is proposed for wastewater samples in terms of the inertness of wastewater samples toward enzyme activity. This involves taking advantage of the sensitivity of enzymes to pollutants that may be present in the waste samples. The effect of wastewater samples on the rate of a number of different enzyme-catalyzed reactions was measured, and the results for all the selected enzymes were analyzed in an integrated fashion (multi-enzymatic sensor). This approach enabled us to define an overall quality index, the "Impact on Enzyme Function" (IEF-index), which is composed of three indicators: i) the Synoptic parameter, related to the average effect of the waste sample on each component of the enzymatic sensor; ii) the Peak parameter, related to the maximum effect observed among all the effects exerted by the sample on the sensor components; and, iii) the Interference parameter, related to the number of sensor components that are affected less than a fixed threshold value. A number of water based samples including public potable tap water, fluids from urban sewage systems, wastewater disposal from leather, paper and dye industries were analyzed and the IEF-index was then determined. Although the IEF-index cannot discriminate between different types of wastewater samples, it could be a useful parameter in monitoring the improvement of the quality of a specific sample. However, by analyzing an adequate number of waste samples of the same type, even from different local contexts, the profile of the impact of each component of the multi-enzymatic sensor could be typical for specific types of waste. The IEF-index is proposed as a supplementary qualification score for wastewaters, in addition to the certification of the waste's conformity to legal requirements.

Fully integrated biochip platforms for advanced healthcare

Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications.

Development of a novel optical biosensor for detection of organophosphorus pesticides based on methyl parathion hydrolase immobilized by metal-chelate affinity

We have developed a novel optical biosensor device using recombinant methyl parathion hydrolase (MPH) enzyme immobilized on agarose by metal-chelate affinity to detect organophosphorus (OP) compounds with a nitrophenyl group. The biosensor principle is based on the optical measurement of the product of OP catalysis by MPH (p-nitrophenol). Briefly, MPH containing six sequential histidines (6× His tag) at its N-terminal was bound to nitrilotriacetic acid (NTA) agarose with Ni ions, resulting in the flexible immobilization of the bio-reaction platform. The optical biosensing system consisted of two light-emitting diodes (LEDs) and one photodiode. The LED that emitted light at the wavelength of the maximum absorption for p-nitrophenol served as the signal light, while the other LED that showed no absorbance served as the reference light. The optical sensing system detected absorbance that was linearly correlated to methyl parathion (MP) concentration and the detection limit was estimated to be 4 μM. Sensor hysteresis was investigated and the results showed that at lower concentration range of MP the difference got from the opposite process curves was very small. With its easy immobilization of enzymes and simple design in structure, the system has the potential for development into a practical portable detector for field applications.

High enzymatic activity preservation with carbon nanotubes incorporated in urease-lipid hybrid Langmuir-Blodgett films

The search for optimized architectures, such as thin films, for the production of biosensors has been challenged in recent decades, and thus, the understanding of molecular interactions that occur at interfaces is essential to improve the construction of nanostructured devices. In this study, we investigated the possibility of using carbon nanotubes in hybrid Langmuir-Blodgett (LB) films of lipids and urease to improve the catalytic performance of the immobilized enzyme. The molecular interactions were first investigated at the air-water interface with the enzyme adsorbed from the aqueous subphase onto Langmuir monolayers of dimyristoylphosphatidic acid (DMPA). The transfer to solid supports as LB films and the subsequent incorporation of carbon nanotubes in the hybrid film permitted us to evaluate how these nanomaterials changed the physical properties of the ultrathin film. Colorimetric measurments indicated that the presence of nanotubes preserved and enhanced the enzyme activity of the film, even after 1 month. These results show that the use of such hybrid films is promising for the development of biosensors with an optimized performance.

Preparation and characterization of mono- and multilayer films of polymerizable 1,2-polybutadiene using the Langmuir-Blodgett technique

The essence of this study is to apply the Langmuir-Blodgett (LB) technique for assembling asymmetric membranes. Accordingly, Langmuir films of a (further) polymerizable polymer, 1,2-polybutadiene (1,2-pbd), were studied and transferred onto different solid supports, such as gold, indium tin oxide (ITO), and silicon. The layers were characterized both at the air/water interface as well as on different substrates using numerous methods including cyclic voltammetry, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and reflection-absorption Fourier transform infrared spectroscopy. The Langmuir films were stable at the air-water interface as long as they were not exposed to UV irradiation. The LB films formed disorganized layers, which gradually blocked the permeation of different species with increasing the number of deposited layers. The thickness was ca. 4-7 Å per layer. Irradiating the Langmuir films caused their cross-linking at the air-water interface. Furthermore, we took advantage of the reactivity of the double bond of the LB films on the solid supports and graft polymerized acrylic acid on top of the 1,2-pbd layers. This approach is the basis of the formation of an asymmetric membrane that requires different porosity on both of its sides.

An optical test strip for the detection of benzoic acid in food

Fabrication of a test strip for detection of benzoic acid was successfully implemented by immobilizing tyrosinase, phenol and 3-methyl-2-benzothiazolinone hydrazone (MBTH) onto filter paper using polystyrene as polymeric support. The sensing scheme was based on the decreasing intensity of the maroon colour of the test strip when introduced into benzoic acid solution. The test strip was characterized using optical fiber reflectance and has maximum reflectance at 375 nm. It has shown a highly reproducible measurement of benzoic acid with a calculated RSD of 0.47% (n = 10). The detection was optimized at pH 7. A linear response of the biosensor was obtained in 100 to 700 ppm of benzoic acid with a detection limit (LOD) of 73.6 ppm. At 1:1 ratio of benzoic acid to interfering substances, the main interfering substance is boric acid. The kinetic analyses show that, the inhibition of benzoic is competitive inhibitor and the inhibition constant (K_i) is 52.9 ppm. The activity of immobilized tyrosinase, phenol, and MBTH in the test strip was fairly sustained during 20 days when stored at 3 °C. The developed test strip was used for detection of benzoic acid in food samples and was observed to have comparable results to the HPLC method, hence the developed test strip can be used as an alternative to HPLC in detecting benzoic acid in food products.

Development and validation of a cellular biosensor detecting pesticide residues in tomatoes

Two of the most important categories of pesticides used in agricultural practice are organophosphates and dithiocarbamates. Their extensive and inappropriate use has rendered their reliable monitoring at trace levels more and more necessary. This study presents the construction of a rapid and sensitive cellular biosensor test based on the measurement of changes of the cell membrane potential of immobilized cells, according to the working principle of the Bioelectric Recognition Assay (BERA). The cells were immobilized by entrapment in a sodium alginate bead and directly applied in different pesticide dilutions and agricultural samples. The pesticides used were the organophosphate insecticide diazinon and the dithiocarbamate fungicide propineb. Two different cell types, N2a (neuroblastoma) and Vero (fibroblast) were used as the biosensory elements in order to investigate their differential response against the pesticides. In this way, we hoped to increase the selectivity of the assay. Based on the observed patterns of response, we demonstrate that the sensor can be used for the qualitative and, in some concentrations, quantitative detection of the pesticides with a high degree of reproducibility. The lowest detected concentration was 3nM. Finally, for the investigation of the effects of different pesticides on the accumulation of cytosolic Ca(2+), we conducted a fluorescent assay on N2a cells treated with tomato sample extracts, which were replicates of the E.U. proficiency test sample. The tomato samples were either organically grown or contained 14 different pesticides. The experimental results showed a higher increase of the intracellular Ca(2+) concentration in cells treated with non-organic samples compared to the cells treated with organic samples.

Biosensors as useful tools for environmental analysis and monitoring

Recent advances in the development and application of biosensors for environmental analysis and monitoring are reviewed in this article. Several examples of biosensors developed for relevant environmental pollutants and parameters are briefly overviewed. Special attention is paid to the application of biosensors to real environmental samples, taking into consideration aspects such as sample pretreatment, matrix effects and validation of biosensor measurements. Current trends in biosensor development are also considered and commented on in this work. In this context, nanotechnology, miniaturisation, multi-sensor array development and, especially, biotechnology arise as fast-growing areas that will have a marked influence on the development of new biosensing strategies in the near future.

Enzyme inhibition-based biosensors for food safety and environmental monitoring

Analytical technology based on sensors is an extremely broad field which impacts on many major industrial sectors such as the pharmaceutical, healthcare, food, and agriculture industries as well as environmental monitoring. This review will highlight the research carried out during the last 5 years on biosensors that are based on enzyme inhibition for determination of pollutants and toxic compounds in a wide range of samples. Here the different enzymes implicated in the inhibition, different transducers forming the sensing devices, and the different contaminants analyzed are considered. The general application of the various biosensors developed, with emphasis on food and environmental applications, is reviewed as well as the general approaches that have been used for enzyme immobilization, the enzyme catalysis, and the inhibition mechanism.

Screen-printed bienzymatic sensor based on sol–gel immobilized Nippostrongylus brasiliensis acetylcholinesterase and a cytochrome P450 BM-3 (CYP102-A1) mutant

Here, we describe the development of a bi-enzymatic biosensor that simplifies the sample pretreatment steps for insecticide detection, and opens the way for a highly sensitive detection of phosphorothionates in food. These compounds evolve their inhibitory activity towards acetylcholinesterases (AChEs) only after oxidation, which is performed in vivo by P450 monooxygenases. Consequently, phosphorothionates require a suitable sample pretreatment by selective oxidation to be detectable in AChE based systems. In this study, enzymatic phosphorothionate activation and AChE inhibition were integrated in a single biosensor unit. A triple mutant of cytochrome P450 BM-3 (CYP 102-A1) and Nippostrongylus brasiliensis AChE (NbAChE) was immobilized using a fluoride catalyzed sol-gel process. Different sol-gel types were fabricated and characterized regarding enzyme loading capacity and enzyme activity containment. The enzyme sol-gel itself already proved to be suitable for the highly sensitive detection of paraoxon and parathion in a spectrometric assay. A method for screen-printing of this enzyme sol-gel on thick film electrodes was developed. Finally, amperometric biosensors containing coimmobilized NbAChE and the cytochrome P450 BM-3 mutant were produced and characterized with respect to signal stability, organophosphate detection, and storage stability. The detection limits achieved were 1 microg/L for paraoxon and 10 microg/L for parathion, which is according to EC regulations the highest tolerable pesticide concentration in infant food.

Enzyme association with lipidic Langmuir-Blodgett films: interests and applications in nanobioscience

This review presents the recent advances in the achievement of organized proteo-lipidic nanostructures based on Langmuir-Blodgett technology and their potential applications in the nanobioscience area. By using the self-assembled properties of amphiphilic biomolecules at the air-water interface, the Langmuir-Blodgett (LB) technique offers the possibility to prepare ultrathin layers suitable for biomolecule immobilization at the molecular level. This review will provide a general overview of the enzyme association with preformed Langmuir-Blodgett films in connection with their potential applications in biosensing device developments, and then introduce the design of a new functionalised biomimetic nanostructure with oriented recognition site. The potential applications of such an organized proteo-lipidic nanostructure for biocatalysis investigations of an immobilised enzyme in a biomimetic situation and for the development of bioelectronic devices are finally discussed.

Kinetics Study of Bungarus fasciatus Venom Acetylcholinesterase Immobilised on a Langmuir-Blodgett Proteo-Glycolipidic Bilayer

This study deals with the kinetics properties of an enzyme immobilised in a defined orientation in a biomimetic environment. For this purpose, acetylcholinesterase (AChE) was captured at the surface of a nanostructured proteo-glycolipidic Langmuir-Blodgett film through specific recognition by a noninhibitor monoclonal antibody (IgG) inserted in a neoglycolipid bilayer. Modelling of this molecular assembly provided a plausible interpretation of the functional orientation of the enzyme. The AChE activity being stable for several weeks, the enzyme kinetics were investigated, and fitted perfectly with heterogeneous biocatalytic behaviour representative of cellular enzymatic catalysis. The AChE-IgG-glycolipid nanostructure was directly interfaced with an efficient optical device. Such an association, leading to an intimate contact between the nanostructure and the biochemical signal transducer, gives direct access to the intrinsic AChE behaviour. This study thus demonstrates the potential for direct investigation of the kinetic behaviour of an immobilised enzyme on a lipid bilayer through an efficient transduction system.

Determination of binary pesticide mixtures by an acetylcholinesterase–choline oxidase biosensor

In this study, acetylcholinesterase (AChE) and choline oxidase (ChO) were co-immobilized on poly(2-hydroxyethyl methacrylate) (pHEMA) membranes to construct a biosensor for the detection of anti-cholinesterase compounds. pHEMA membranes were prepared with the addition of SnCl(4) to achieve the desired porosity. Immobilization of the enzymes was done by surface attachment via epichlorohydrin (Epi) and Cibacron Blue F3G-A (CB) activation. Enzyme immobilized membrane was used in the detection of anti-cholinesterase activity of aldicarb (AS), carbofuran (CF) and carbaryl (CL), as well as two mixtures, (AS+CF) and (AS+CL). The total anti-cholinesterase activity of binary pesticide mixtures was found to be lower than the sum of the individual inhibition values.

Optical biosensor consisting of glutathione-S-transferase for detection of captan

The optical biosensor consisting of a glutathione-S-transferase (GST)-immobilized gel film was developed to detect captan in contaminated water. The sensing scheme was based on the decrease of yellow product, s-(2,4-dinitrobenzene) glutathione, produced from substrates, 1-chloro-2,4-dinitrobenzene (CDNB) and glutathione (GSH), due to the inhibition of GST reaction by captan. Absorbance of the product as the output of enzyme reaction was detected and the light was guided through the optical fibers. The enzyme reactor of the sensor system was fabricated by the gel entrapment technique for the immobilized GST film. The immobilized GST had the maximum activity at pH 6.5. The optimal concentrations of substrates were determined with 1 mM for both of CDNB and GSH. The optimum concentration of enzyme was also determined with 100 microg/ml. The activity of immobilized enzyme was fairly sustained during 30 days. The proposed biosensor could successfully detect the captan up to 2 ppm and the response time to steady signal was about 15 min.

Optical biosensor for simultaneous detection of captan and organophosphorus compounds

The optical biosensor consisting of GST and acetylcholinesterase (AChE)-immobilized gel film was developed to detect captan and organophosphorus compounds simultaneously in contaminated water. The sensing scheme was based on the measurement of decrease of products formation (s-(2,4-dinitrobenzene) glutathione and alpha-naphthol by GST and AChE, respectively) due to the inhibition by captan and organophosphorus compounds. The absorbance of s-(2,4-dinitrobenzene) glutathione and alpha-naphthol was detected at 400 and 500 nm, respectively, by a proposed optical biosensor system. It was observed that AChE was inhibited by both captan and organophosphorus compounds, and GST was inhibited only by captan. The simultaneous detection and quantification of captan and organophosphorus compounds could be successfully achieved by the proposed sensor system. The proposed biosensor could successfully detect the captan and organophosphorus compounds concentration from 0 to 2 ppm.