Disposable amperometric immunosensor for the detection of polycyclic aromatic hydrocarbons (PAHs) using screen-printed electrodes

A novel platform using homobifunctional hydrazide for enrichment and isolation of urinary circulating RNAs

Changes in specific circulating RNA (circRNA) expressions can serve as diagnostic noninvasive biomarkers for prostate cancer (PCa). However, there are still unmet needs, such as unclear types and roles of circRNAs, PCa detection in benign prostatic hyperplasia (BPH) by unstandardized methods, and limitations of sample volume capacity and low circRNA concentrations. This study reports a simple and rapid circRNA enrichment and isolation technique named "HAZIS-CirR" for the analysis of urinary circRNAs. The method utilizes homobifunctional hydrazides with amine-modified zeolite and polyvinylidene fluoride (PVDF) syringe filtration for combining electrostatic and covalent coupling and size-based filtration, and it offers instrument-free isolation of circRNAs in 20 min without volume limitation, thermoregulation, and lysis. HAZIS-CirR has high capture efficiency (82.03%-92.38%) and a 10-fold more sensitive detection limit (20 fM) than before enrichment (200 fM). The clinical utility of HAZIS-CirR is confirmed by analyzing circulating mRNAs and circulating miRNAs in 89 urine samples. Furthermore, three miRNA panels that differentiate PCa from BPH and control, PCa from control, and BPH from control, respectively, are established by comparing miRNA levels. HAZIS-CirR will be used as an optimal and established method for the enrichment and isolation of circRNAs as diagnostic, prognostic, and predictive biomarkers in human cancers.

Electrochemical Development of an Immunosensor for Detection Polychlorinated biphenyls (PCBs) for Environmental Analysis

Polychlorinated biphenyls (PCBs) are a highly toxic family of synthetic chemical compounds. PCBs are widely spread in the environment and their toxicity can cause serious ailments to living organisms such as cancer; therefore, developing a device for the detection of PCBs in the environment is significant. In this paper, polyclonal primary anti-PCB antibodies were immobilized onto a gold screen-printed electrode with the purpose of creating an electrochemical immunosensor for the detection of Aroclor 1254. It was modified with 11-mercaptoundecanoic acid (11-MUA) and the activation of the carboxylic acid terminal was performed by cross-linking 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hyrodsuccinmide (NHS) on the electrode surface. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), linear sweep voltammetry, atomic force microscopy (AFM), scanning electron microscopy (SEM), and contact angle measurement were employed to characterize SAM development on the gold electrode. Using a competitive assay, a 0.09 ng/mL−1 limit of detection and a linear range of 0.101–220 ng/mL−1 were determined. The self-assembled monolayers (SAM) were successful in encapsulating the PCBs on the immunosensor. The electrochemical detection showed better resolution when compared to traditional methods such as the ELISA optical technique. The novel electrochemical immunosensor approach that is discussed in this paper has the potential to offer rapid sample screening in a portable, disposable format and could contribute to the effective control and prevention of PCBs in the environment.

Efficient conjugation of anti-HBsAg antibody to modified core-shell magnetic nanoparticles (Fe3O4@SiO2/NH2)

Introduction: Further development of magnetic-based detection techniques could be of significant use in increasing the sensitivity of detection and quantification of hepatitis B virus (HBV) infection. The present work addresses the fabrication and characterization of a new bio-nano composite based on the immobilization of goat anti-HBsAg antibody on modified core-shell magnetic nanoparticles (NPs) by (3-aminopropyl) triethoxysilane (APTES), named Fe₃O₄@SiO₂/NH₂, and magnetic NPs modified by chitosan (Fe₃O₄@CS).

Methods: At the first step, Fe₃O₄ was modified with the silica and APTES (Fe₃O₄@SiO₂/NH₂) and chitosan (Fe₃O₄@CS) separately. The goat anti-HBsAg antibody was activated by two different protocols: Sodium periodate and EDC-NHS. Then the resulted composites were conjugated with activated goat anti-HBsAg IgG. An external magnet collected Bio-super magnetic NPs (BSMNPs) and the remained solution was analyzed by the Bradford method to check the amount of attached antibody to the surface of BSMNPs.

Results: The findings indicated that activation of antibodies by sodium periodate method 15-17 µg antibody immobilized on 1 mg of super magnetic nanoparticles (SMNPs). However, in the EDC-NHS method, 8-10 µg of antibody was conjugated with 1 mg of SMNPs. The resulting bio-magnetic NPs were applied for interaction with the HBsAg target using enzyme-linked immunosorbent assay (ELISA). About 1 µg antigen attached to 1 mg SMNPs, which demonstrated that the fabricated materials are applicable in the detection scope of HBsAg.

Conclusion: In the present study, we developed new antibody-conjugated magnetic NPs for the detection of HBsAg using an efficient conjugation strategy. The results demonstrated that the binding capacity of Fe₃O₄@SiO₂/NH₂ was comparable with commercially available products. Our designed method for conjugating anti-HBsAg antibody to a magnetic nanoparticle opens the way to produce a high capacity of magnetic NPs.

Suppressing Non-Specific Binding of Proteins onto Electrode Surfaces in the Development of Electrochemical Immunosensors

Electrochemical immunosensors, EIs, are systems that combine the analytical power of electrochemical techniques and the high selectivity and specificity of antibodies in a solid phase immunoassay for target analyte. In EIs, the most used transducer platforms are screen printed electrodes, SPEs. Some characteristics of EIs are their low cost, portability for point of care testing (POCT) applications, high specificity and selectivity to the target molecule, low sample and reagent consumption and easy to use. Despite all these attractive features, still exist one to cover and it is the enhancement of the sensitivity of the EIs. In this review, an approach to understand how this can be achieved is presented. First, it is necessary to comprise thoroughly all the complex phenomena that happen simultaneously in the protein-surface interface when adsorption of the protein occurs. Physicochemical properties of the protein and the surface as well as the adsorption phenomena influence the sensitivity of the EIs. From this point, some strategies to suppress non-specific binding, NSB, of proteins onto electrode surfaces in order to improve the sensitivity of EIs are mentioned.

Polycyclic Aromatic Hydrocarbons (PAHs) in inland aquatic ecosystems: Perils and remedies through biosensors and bioremediation

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most ubiquitous environmental pollutants of high global concern. PAHs belong to a diverse family of hydrocarbons with over one hundred compounds known, each containing at least two aromatic rings in their structure. Due to hydrophobic nature, PAHs tend to accumulate in the aquatic sediments, leading to bioaccumulation and elevated concentrations over time. In addition to their well-manifested mutagenic and carcinogenic effects in humans, they pose severe detrimental effects to aquatic life. The high eco-toxicity of PAHs has attracted a number of reviews, each dealing specifically with individual aspects of this global pollutant. However, efficient management of PAHs warrants a holistic approach that combines a thorough understanding of their physico-chemical properties, modes of environmental distribution and bioaccumulation, efficient detection, and bioremediation strategies. Currently, there is a lack of a comprehensive study that amalgamates all these aspects together. The current review, for the first time, overcomes this constraint, through providing a high level comprehensive understanding of the complexities faced during PAH management, while also recommending future directions through potentially viable solutions. Importantly, effective management of PAHs strongly relies upon reliable detection tools, which are currently non-existent, or at the very best inefficient, and therefore have a strong prospect of future development. Notably, the currently available biosensor technologies for PAH monitoring have not so far been compiled together, and therefore a significant focus of this article is on biosensor technologies that are critical for timely detection and efficient management of PAHs. This review is focussed on inland aquatic ecosystems with an emphasis on fish biodiversity, as fish remains a major source of food and livelihood for a large proportion of the global population. This thought provoking study is likely to instigate new collaborative approaches for protecting aquatic biodiversity from PAHs-induced eco-toxicity.

Current Technologies of Electrochemical Immunosensors: Perspective on Signal Amplification

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms.

Biological and analytical techniques used for detection of polyaromatic hydrocarbons

Polycyclic aromatic hydrocarbons contain two or more fused benzene rings that are considered as cosmo-pollutants ubiquitously found in the environment. The identification and monitoring of polycyclic aromatic hydrocarbons (PAHs) are of great interests for rapid and on-site detection. Therefore, many analytical and biological techniques have been proposed for the qualitative and quantitative assessments of PAHs. Non-biological analytical techniques such as infrared, Raman, and fluorescence spectroscopies are commonly exploited as non-destructive techniques while gas chromatography (GC) and high-performance liquid chromatography (HPLC) with multiple detectors are extensively employed for the separation and detection of an analyte. Even though spectroscopy and chromatography are more accurate, convenient, and feasible techniques, often, these methods are expensive and sophisticated which require high maintenance cost. On the other hand, biological approaches, i.e., immunoassay, PCR, and microarray, offer comprehensive high-throughput specificity and sensitivity for a similar analyte. Biosensor- and immunoassay-mediated detections of PAHs have opened up new avenues in terms of low cost, rapid determination, and higher sensitivity. In this review, we have discussed the strengths and limitations of biological and analytical techniques that were explored for precise evaluation and were trusted at both the legislation and research levels.

Electrochemical Interrogation of G3-Poly(propylene thiophenoimine) Dendritic Star Polymer in Phenanthrene Sensing

A novel dendritic star-copolymer, generation 3 poly(propylene thiophenoimine) (G3PPT)-co-poly(3-hexylthiophene) (P3HT) star co-polymer on gold electrode (i.e., Au|G3PPT-co-P3HT) was used as a sensor system for the determination of phenanthrene (PHE). The G3PPT-co-P3HT star co-polymer was synthesized via in situ electrochemical co-polymerization of generation 3 poly (propylene thiophenoimine) and poly (3-hexylthiophene) on gold electrode. 1HNMR spectroscopy was used to determine the regioregularity of the polymer composites, whereas Fourier transform infrared spectroscopy and scanning electron microscopy were used to study their structural and morphological properties. Au|G3PPT-co-P3HT in the absence of PHE, exhibited reversible electrochemistry attributable to the oligo (thiophene) 'pendants' of the dendrimer. PHE produced an increase in the voltammetric signals (anodic currents) due to its oxidation on the dendritic material to produce catalytic current, thereby suggesting the suitability of the Au|G3PPT-co-P3HT electrode as a PHE sensor. The electrocatalysis of PHE was made possible by the rigid and planar oligo-P3HT species (formed upon the oxidation of the oligo (thiophene) pendants of the star-copolymer), which allowed the efficient capture (binding) and detection (electrocatalytic oxidation) of PHE molecules.

Enhanced Vibrational Spectroscopies as Tools for Small Molecule Biosensing

In this short summary we summarize some of the latest developments in vibrational spectroscopic tools applied for the sensing of (small) molecules and biomolecules in a label-free mode of operation. We first introduce various concepts for the enhancement of InfraRed spectroscopic techniques, including the principles of Attenuated Total Reflection InfraRed (ATR-IR), (phase-modulated) InfraRed Reflection Absorption Spectroscopy (IRRAS/PM-IRRAS), and Surface Enhanced Infrared Reflection Absorption Spectroscopy (SEIRAS). Particular attention is put on the use of novel nanostructured substrates that allow for the excitation of propagating and localized surface plasmon modes aimed at operating additional enhancement mechanisms. This is then be complemented by the description of the latest development in Surface- and Tip-Enhanced Raman Spectroscopies, again with an emphasis on the detection of small molecules or bioanalytes.

A review on amperometric-type immunosensors based on screen-printed electrodes

In this brief review, we summarize the recent research activities involved in the development of amperometric-type immunosensors based on screen-printed electrodes (SPEs). We focus on the underlying principle involved in these types of sensors, their fabrication and electrode surface modification. We also discuss the various factors involved in the designing of such immunosensors and how they affect their performances. Finally we provide an insight into the drawbacks associated with these SPEs.

Analysis of polycyclic aromatic hydrocarbons in water with gold nanoparticles decorated hydrophobic porous polymer as surface-enhanced Raman spectroscopy substrate

A method for surface-enhanced Raman spectroscopy (SERS) sensing of polycyclic aromatic hydrocarbons (PAHs) is reported. Gold nanoparticles (AuNPs) decorated hydrophobic porous glycidyl methacrylate-ethylene dimethacrylate (GMA-EDMA) polymer is developed as the SERS substrate. GMA-EDMA material with porosity and permeability shows rapid and efficient adsorption of PAHs through presumed hydrophobic interaction, which brings the analytes close to the substrate. Meanwhile, the three dimensional porous morphology might benefit AuNPs distribution for high SERS enhancement. Studies on the effects of AuNPs surface coverage on the substrate and time of PAHs-substrate interaction are presented. The qualitative analysis and quantitative tendency of this method for PAHs detection are investigated with anthracene, phenanthrene and pyrene as probe molecules, showing that the characteristic fingerprint vibrational peaks of each PAH can be readily identified, and the limit of detections are 0.93×10(-7), 4.5×10(-7) and 1.1×10(-7) M respectively. Moreover, the substrate exhibits high reproducibility with the relative standard deviation about 16% in spot and spot SERS intensity. Using this method for rapid screening of PAHs mixture in some water samples are performed well, which might be useful for environmental pollutions monitoring.

Electrochemical determination of phenanthrene based on anthraquinone sulfonate and poly diallyldimethylammonium chloride modified indium–tin oxide electrode

The amount of Phe could be quantified by the electrochemical oxidation peak current difference of AQS at AQS/PDDA/ITO through the specific interaction between AQS and Phe.

Environmental applications of photoluminescence-based biosensors

For monitoring and treatment of soil and water, environmental scientists and engineers require measurements of the concentration of chemical contaminants. Although laboratory-based methods relying on gas or liquid chromatography can yield very accurate measurements, they are also complex, time consuming, expensive, and require sample pretreatment. Furthermore, they are not readily adapted for in situ measurements.Sensors are devices that can provide continuous, in situ measurements, ideally without the addition of reagents. A biosensor incorporates a biological component coupled to a transducer, which translates the interaction between the analyte and the biocomponent into a signal that can be processed and reported. A wide range of transducers have been employed in biosensors, the most common of which are electrochemical and optical. In this contribution, we focus on photoluminescence-based biosensors of potential use in the applications described above.Following a review of photoluminescence and a discussion of the optoelectronic hardware part of these biosensor systems, we provide explanations and examples of optical biosensors for specific chemical groups: hydrocarbons and alcohols, halogenated organics, nitro-, phospho-, sulfo-, and other substituted organics, and metals and other inorganics. We also describe approaches that have been taken to describe chemical mixtures as a whole (biological oxygen demand and toxicity) since most environmental samples contain mixtures of unknown (and changing) composition. Finally, we end with some thoughts on future research directions that are necessary to achieve the full potential of environmental biosensors.

Disposable screen printed electrochemical sensors: tools for environmental monitoring

Screen printing technology is a widely used technique for the fabrication of electrochemical sensors. This methodology is likely to underpin the progressive drive towards miniaturized, sensitive and portable devices, and has already established its route from "lab-to-market" for a plethora of sensors. The application of these sensors for analysis of environmental samples has been the major focus of research in this field. As a consequence, this work will focus on recent important advances in the design and fabrication of disposable screen printed sensors for the electrochemical detection of environmental contaminants. Special emphasis is given on sensor fabrication methodology, operating details and performance characteristics for environmental applications.

Silver nanowire-based electrochemical immunoassay for sensing immunoglobulin G with signal amplification using strawberry-like ZnO nanostructures as labels

The quick development of nanoscience and nanotechnology has paved the way for ultrasensitive biosensing and analysis. In this work, an ultrasensitive electrochemical immunosensor was developed for the detection of human immunoglobulin G (IgG) by combining with a newly designed trace tag on a disposable immunosensor array. The array was prepared by immobilizing captured antibodies on ultralong Ag nanowires, whilst the trace tag was prepared by loading horseradish peroxidase (HRP)-labeled goat anti-human IgG (HRP-anti-IgG) on thionine (TH)-doped mesoporous ZnO nanostrawberries (MP-ZnO). With a sandwich-type immunoassay format, mainly due to crystalline framework and high surface area of the mesoporous (MP) materials, as well as the superconductivity of silver nanowires, the electrochemical signal was significantly amplified. The linear range of the developed immunosensor is 0.01-200 ng mL(-1) and the detection limit is 4 pg mL(-1) IgG, which make the hierarchically nanostructured composites very promising candidates for the next-generation sandwich-type electrochemical immunoassays.

Impedimetric immunoglobulin G immunosensor based on chemically modified graphenes

Immunosensors which display high sensitivity and selectivity are of utmost importance to the biomedical field. Graphene is a material which has immense potential for the fabrication of immunosensors. For the first time, we evaluate the immunosensing capabilities of various graphene surfaces in this work. We propose a simple and label-free electrochemical impedimetric immunosensor for immunoglobulin G (IgG) based on chemically modified graphene (CMG) surfaces such as graphite oxide, graphene oxide, thermally reduced graphene oxide and electrochemically reduced graphene oxide. Disposable electrochemical printed electrodes were first modified with CMG materials before anti-immunoglobulin G (anti-IgG), which is specific to IgG, was immobilized. The principle of detection lies in the changes in impedance spectra of the redox probe after the attachment of IgG to the immobilized anti-IgG. It was found that thermally reduced graphene oxide has the best performance when compared to the other CMG materials. In addition, the optimal concentration of anti-IgG to be deposited onto the modified electrode surface is 10 μg ml(-1) and the linear range of detection of the immunosensor is from 0.3 μg ml(-1) to 7 μg ml(-1). Finally, the fabricated immunosensor also displays selectivity for IgG.

Near real-time, on-site, quantitative analysis of PAHs in the aqueous environment using an antibody-based biosensor

Rapid, on-site, quantitative assessments of dissolved polycyclic aromatic hydrocarbons (PAHs) were demonstrated for two field applications. The platform, a KinExA Inline Sensor (Sapidyne Instruments), employed the monoclonal anti-PAH antibody, 7B2.3, which has specificity for 3- to 5-ring PAHs. A spatial study was conducted near a dredging site where contaminated sediments were being removed, and a temporal study was performed during a rainfall event. Most importantly, the generation of near real-time data guided management decisions in the field and determined proper sampling protocols for conventional analyses. The method was able to determine PAH concentrations as low as 0.3 µg/L, within 10 min of sample acquisition, and to assess 80+ samples (not including standards and blanks) in less than 3 d. These results were compared with a laboratory-based gas chromatography-mass spectrometry method in which a wide array of PAHs, including alkylated homologs, were examined. This system shows great promise as a field instrument for the rapid monitoring of PAH pollution.

Sensitive detection of polycyclic aromatic hydrocarbons using CdTe quantum dot-modified TiO₂ nanotube array through fluorescence resonance energy transfer

CdTe quantum dots (QDs) are prepared on TiO(2) nanotubes (TiO(2) NTs), for the first time, with pulse electrodeposition. A novel single-drop optical sensor is prepared with the CdTe QDs-modified TiO(2) NTs, and applied for the detection of polycyclic aromatic hydrocarbons (PAHs) based on fluorescence resonance energy transfer (FRET). Excited at 270 nm, the sensor shows fluorescence emission at around 370 nm. As PAHs are with absorption/fluorescence emission at around 364/410 nm, FRET happens between the CdTe QDs and PAHs with the CdTe QDs as donors and PAHs as receptors. The sensitivity is dependent on the number of rings of the PAHs, with the highest sensitivity observed in the response to benzo(a)pyrene (BaP). Using FRET, the sensitivity to BaP is enhanced by about 2 orders with respect to the direct fluorescent spectrometry. The proposed sensor shows a linear response to the logarithm of BaP concentration in the range of 400 nM to 40 pM, with a detection limit of 15 pM, which is much close to the quality criteria (15.1 pM) in drinking water set by U.S. Environment Protection, suggesting that the proposed sensor can be used for quick scanning of PAHs. The achieved sensitivity is much higher than that of the published sensor-based methods. As PAHs are quantified based on the relative fluorescence intensity at 410-370 nm, the sensor need no calibration with a standard sensor, avoiding the influence from the sensor-to-sensor difference. The practicability of the sensor is tested by analyzing PAHs in Xiangjiang River water, the PAHs contents ranges from 0.045 to 2.847 ng/L based on the sampling spots.

Development of a disposable glucose biosensor using electroless-plated Au/Ni/copper low electrical resistance electrodes

This paper presents a glucose biosensor, which was developed using a Au/Ni/copper electrode. Until now, research regarding the low electrical resistance and uniformity of this biosensor electrode has not been conducted. Glucose oxidase (GOD) immobilized on the electrode effectively plays the role of an electron shuttle, and allows glucose to be detected at 0.055 V with a dramatically reduced resistance to easily oxidizable constituents. The Au/Ni/copper electrode has a low electrical resistance, which is less than 0.01 Omega, and it may be possible to mass produce the biosensor electrode with a uniform electrical resistance. The low electrical resistance has the advantage in that the redox peak occurs at a low applied potential. Using a low operating potential (0.055 V), the GOD/Au/Ni/copper structure creates a good sensitivity to detect glucose, and efficiently excludes interferences from common coexisting substances. The GOD/Au/Ni/copper sensor exhibits a relatively short response time (about 3s), and a sensitivity of 0.85 microA mM(-1) with a linear range of buffer to 33 mM of glucose. The sensor has excellent reproducibility with a correlation coefficient of 0.9989 (n=100 times) and a total non-linearity error of 3.17%.

Gel-based immunoassay for non-instrumental detection of pyrene in water samples

A new qualitative immunologically based tube test for non-instrumental detection of pyrene (PYR) in water samples was developed. The method combines the pre-concentration of analyte by immunoextraction and its detection by immunoassay using Sepharose 4B-immobilized IgG-fraction of a polyclonal anti-PYR antiserum (immunoaffinity gel) and 1-pyrenebutyric acid-horseradish peroxidase conjugate (PYR-BA-HRP). The immunoaffinity gel was placed in a standard 1-ml SPE column through which a 10-ml aliquot of water sample spiked with 10% acetonitrile was passed. Following, free antibody binding sites were detected by application of PYR-BA-HRP. Four minutes after addition of the chromogenic substrate the results were visually evaluated by occurring or stayed away blue colour development for negative and positive samples, respectively. Total time for assay was about 15 min for six samples. Under optimized conditions a cut-off level for pyrene of 0.04 ng ml(-1) was found. At this defined concentration, a set of spiked samples (n=175) was analyzed and very low rates of false negatives (1.2%) and false positives (4.6%) determined which fulfils the requirement set by Commission Decision 2002/657/EC for a screening method. No interference by other PAH compounds like naphthalene, fluoranthene, phenanthrene, anthracene, and benzo[a]pyrene at a concentration of 20 ng ml(-1), i.e., 500-fold excess compared to the defined cut-off level was observed. Different water types like surface water, tap water, bottled water, and melted snow were analyzed for PYR contamination by the proposed method and results confirmed by HPLC-FLD.