Voltammetric detection of inorganic phosphate using ion-channel sensing with self-assembled monolayers of a hydrogen bond-forming receptor

Research on Key Technologies of Dual-Light-Type Photoelectric Colorimetric Method for Phosphate Determination

Phosphate plays a crucial role in microbial proliferation, and the regulation of the phosphate concentration can modulate the fermentation efficiency. In this study, based on Lambert-Beer's Law and the selective absorption characteristics of substances under light, a dual-light-type photoelectric colorimetric device for phosphate determination was designed. The device's main components, such as the excitation light path and incubation stations, were modeled and simulated. The primary performance of the instrument was verified, and comparative experiments with a UV-1780 spectrophotometer were conducted to validate its performance. The experimental results demonstrate that this device exhibits a high degree of linearity with an R2 value of 0.9956 and a repeatability of ≤1.72%. The average temperature rise rate at the incubation stations was measured at 0.44 °C/s, with a temperature uniformity ≤ ±0.1 °C (temperature set at 37.3 °C). Consistently observed trends in the measurement of 23 CHO cell suspensions using the UV-1780 spectrophotometer further validated the accuracy and reliability of the device's detection results.

Label-Free Detection of Zeptomol miRNA via Peptide Nucleic Acid Hybridization Using Novel Cyclic Voltammetry Method

To harness the applicability of microribonucleic acid (miRNA) as a cancer biomarker, the detection sensitivity of serum miRNA needs to be improved. This study evaluated the detection sensitivity of miRNA hybridization using cyclic voltammograms (CVs) and microelectrode array chips modified with peptide nucleic acid (PNA) probes and 6-hydroxy-1-hexanethiol. We investigated the PNA probe modification pattern on array chips using fluorescently labeled cDNA. The pattern was not uniformly spread over the working electrode (WE) and had a one-dimensional swirl-like pattern. Accordingly, we established a new ion-channel sensor model wherein the WE is negatively biased through the conductive π–π stacks of the PNA/DNA duplexes. This paper discusses the mechanism underlying the voltage shift in the CV curves based on the electric double-layer capacitance. Additionally, the novel hybridization evaluation parameter ΔE is introduced. Compared to conventional evaluation using oxidation current changes, ΔE was more sensitive. Using ΔE and a new hybridization system for ultrasmall amounts of aqueous solutions (as low as 35 pL), 140 zeptomol label-free miRNA were detected without polymerase chain reaction (PCR) amplification at an adequate sensitivity. Herein, the differences in the target molar amount and molar concentration are elucidated from the viewpoint of hybridization sensitivity.

Electrochemical Anion Sensing: Supramolecular Approaches

Anions play a vital role in a broad range of environmental, technological, and physiological processes, making their detection/quantification valuable. Electroanalytical sensors offer much to the selective, sensitive, cheap, portable, and real-time analysis of anion presence where suitable combinations of selective (noncovalent) recognition and transduction can be integrated. Spurred on by significant developments in anion supramolecular chemistry, electrochemical anion sensing has received considerable attention in the past two decades. In this review, we provide a detailed overview of all electroanalytical techniques that have been used for this purpose, including voltammetric, impedimetric, capacititive, and potentiometric methods. We will confine our discussion to sensors that are based on synthetic anion receptors with a specific focus on reversible, noncovalent interactions, in particular, hydrogen- and halogen-bonding. Apart from their sensory properties, we will also discuss how electrochemical techniques can be used to study anion recognition processes (e.g., binding constant determination) and will furthermore provide a detailed outlook over future efforts and promising new avenues in this field.

Determination of Phosphate in Human Serum with Zirconium/Reduced Graphene Oxide Modified Electrode

An electrochemical phosphate sensor based on zirconium and reduced graphene oxide modified pencil graphite electrode (Zr/rGO-PGE) is proposed. The XRD, CV and EIS confirmed that GO was partially reduced on the PGE. Scanning electron microscopy (SEM) exhibited the layered and wrinkled structures for the rGO-PGE and Zr/rGO-PGE, respectively. Cyclic voltammetry showed the immobilized rGO was highly stable and had high activity toward zirconium adsorption. The prepared electrode was used for the electrochemical determination of phosphate. Based on the optimum condition using differential pulse voltammetry, the limit of detection and sensitivity for phosphate was obtained as [0.011(± 0.004) μM] (S/N = 3) and [622.4(± 9.6) μA μM^-1 cm^-2], respectively. The sensor was successfully evaluated for phosphate determination in human serum samples. In practical terms, the construction of this sensor was exceptionally simple, fast, cost effective and reproducible.

Assessment of molecularly imprinted polymers as phosphate sorbents

Phosphorus (P) is a non-renewable natural resource which is used extensively in agriculture as a fertilizer. Phosphate (PO₄^3-) rocks are mined to meet growing agricultural demands induced by rising global populations. Much of the P used in agricultural fields finds its way into surface waters where it permanently resides, leading to devastating effects on the aquatic ecosystem through eutrophication of the waterbodies. This research was aimed at developing a sorbent that can engender a P reuse cycle by utilizing eutrophic surface waters as viable P sources (mines). The goal was to develop a sorbent which can selectively recover low concentration (≤100 P μg L^-1) typical of eutrophic waters. Molecularly imprinted polymers (MIPs) were identified as a potential technology for accomplishing this goal. Three MIPs were screened for viability by assessing their sorption capacities. After the initial screening, one MIP was selected for further studies. The selected MIP was found to have partial PO₄^3- selectivity and tunable P sorption capacity. Adjusting the template:monomer ratio resulted in an increase in P sorption capacity from ∼11 to ∼28 mg PO₄^3--P g^-1, making this MIP competitive with existing technologies. The MIP was characterized to understand the polymer chemistry and mechanisms of P-removal. The possible mechanisms of aqueous P removal by the MIP were identified as selective chemical binding to the imprinted recognition sites and electrostatic attraction.

Potentiometric sensing of aqueous phosphate by competition assays using ion-exchanger doped-polymeric membrane electrodes as transducers

Using Zn(2+)-BPMP or Cu(2+)-BPMP as a receptor and o-mercaptophenol as an indicator, potentiometric sensing of aqueous phosphate by competition assays was achieved. With attractive features of portability, low cost and resistance to interference from turbidity and color, this sensor was successfully used for phosphate detection in biological and water samples.

Sensing and analysis of soluble phosphates in environmental samples: a review

Excess phosphate levels in water can lead to increased algal growth, eutrophication and reduced water quality. Phosphate levels in water are regulated by the EU through the Urban Waste Water Treatment Directive (annual mean total phosphorus concentrations of 1-2 mg/l) and the Water Framework Directive that will enforce "good ecological and chemical status" by 2015. Legislation is therefore driving the need for increased monitoring of soluble phosphate in water, escalating the desire for a direct, label free approach that could provide remote, continuous monitoring in real-time. The standard method for measuring soluble phosphate in water is a colourimetric technique developed in the 1960s. This colourimetric approach is difficult to adapt for on-line measurements, uses specific reagents which require safe disposal and thus incurs significant costs to the water industry when carried out on a large scale. This review considers optical and electrochemical sensors plus recent advances with synthetic receptors and molecularly imprinted polymers. Progress in the development of phosphate sensors, designed for use in a variety of disciplines, is highlighted with a view to adapting successful approaches for use in the water sector. Additional considerations include the need for long term stability, low maintenance, specificity for phosphate and the capability of measuring total phosphorus concentrations down to at least 1 mg/l, as required by legislation. A sensor that could directly measure soluble, inorganic phosphate concentrations would draw significant interest from the environment sector and other disciplines, including the agricultural, detergent and bio-medical industries.

A disposable on-chip phosphate sensor with planar cobalt microelectrodes on polymer substrate

Disposable microsensors on polymer substrates consisting of fully integrated on-chip planar cobalt (Co) microelectrodes, Ag/AgCl reference electrodes, and microfluidic channels have been designed, fabricated, and characterized for phosphate concentration measurement in aqueous solution. The planar Co microelectrode shows phosphate-selective potential response over the range from 10(-5) to 10(-2)M in acidic medium (pH 5.0) for both inorganic (KH(2)PO(4)) and organic (adenosine 5'-triphosphate (ATP) and adenosine 5'-diphosphates (ADP)) phosphate compounds. This microfabricated sensor also demonstrates significant reproducibility with a small repeated sensing deviation (i.e. relative standard deviation (R.S.D.)<1%) on a single chip and a small chip-to-chip deviation (i.e. R.S.D.<2.5%). Specifically, while keeping the high selectivity, sensitivity, and stability of a conventional bulk Co-wire electrode, the proposed phosphate sensor yields advantages such as ease of use, cost effectiveness, reduced analyte consumption, and ease of integrating into disposable polymer lab-on-a-chip devices. The capability to sense both inorganic and organic phosphate compounds makes this sensor applicable in diverse areas such as environmental monitoring, soil extract analysis, and clinical diagnostics.

The electrochemical behavior of p-benzenediol on a self-assembled monolayers Pt electrode modified with N-(2-mercapto-1,3,4-thiadiazol-5-yl)-N′-(4-substituted-arylacetyl) urea

Two novel N-(2-mercapto-1,3,4-thiadiazol-5-yl)-N'-(4-substituted-arylacetyl) urea compounds have been synthesized, characterized by NMR and MS, and used as self-assembly reagents to form self-assembled monolayers (SAMs) on Pt electrodes. The modified electrodes were characterized by electrochemical methods. The electrochemical behavior of p-benzenediol at the SAMs electrodes was investigated. It was found that the electrochemical response to p-benzenediol is controlled by diffusion and can be electrocatalyzed to obtain more symmetrical redox peaks and higher voltammetric current response at the SAMs electrodes, with a peak separation of 80 mV. For p-benzenediol the process at the SAMs electrodes is quasi-reversible with a rate constant of 0.6742 s-1. The SAMs electrodes have been used to determine p-benzenediol by differential pulse voltammetry. The peak current was linear for concentrations of p-benzenediol in the range 1x10(-7)-5x10(-4) mol L-1 and the detection limit was 4.0x10(-8) mol L-1. The SAMs electrodes were used to determine p-benzenediol in real photographic developer and in a synthetic waste water sample; the standard addition recovery was in the range 96.6-100.4%.

Copper(II) Nanosensor Based on a Gold Cysteamine Self-Assembled Monolayer Functionalized with Salicylaldehyde

Fabrication and electrochemical characterization of a novel nanosensor for determination of Cu2+ in subnanomolar concentrations is described. The sensor is based on gold cysteamine self-assembled monolayer functionalized with salicylaldehyde by means of Schiff's base formation. Cyclic voltammetry, Electrochemical impedance spectroscopy (EIS), and electrochemical quartz crystal microbalance were used to probe the fabrication and characterization of the modified electrode. The sensor was used for quantitative determination of Cu2+ by the EIS in the presence of parabenzoquinone in comparison with stripping Osteryoung square wave voltammetry (OSWV). The attractive ability of the sensor to efficiently preconcentrate trace amounts of Cu2+ allowed a simple and reproducible method for copper determination. A wide range linear calibration curve was observed, 5.0 x 10(-11)-5.0 x 10(-6) and 5.0 x 10(-10)-5.0 x 10(-6) M Cu2+, by using the EIS and OSWV, respectively. Moreover, the sensor presented excellent stability with lower than 10% change in the response, as tested for more than three months daily experiments, and a high repeatability with relative standard deviations of 6.1 and 4.6% obtained for a series of eight successive measurements in 5.0 x 10(-7) M Cu2+ solution, by the EIS and OSWV, respectively.

Ion-channel Sensors Based on ETH 1001 Ionophore Embedded in Charged-alkanethiol Self-assembled Monolayers on Gold Electrode Surfaces

An ion-channel sensor was demonstrated by immobilizing ETH 1001, an ionophore for ion-selective electrodes, on a gold electrode surface. The approach for preparing the sensor was to incorporate the ionophore into a mixed self-assembled monolayer of 10-mercaptodecanesulfonate and 11-hydroxy-1-undecanethiol formed on the surface. The voltammetric responses for the thus prepared sensor to the primary cation Ca(2+) were observed by using [Fe(CN)(6)](3-/4-) as an electroactive marker. The ionophore was stably immobilized on the electrode surface with the hydrophobic interaction between its alkyl chains and those of the alkanethiol. The introduction of a proper charge density to the electrode surface improved the sensor sensitivity with retaining the selective response to Ca(2+) against Mg(2+) with concentrations above 10(-4) M.

Charge propagation in "ion channel sensors" based on protein-modified electrodes and redox marker ions

The mechanism of charge propagation in "ion channel sensors" (ICSs) consisting of gold electrodes modified with a layer of charged proteins and highly charged redox-active marker ions in solution was investigated by electrochemical techniques, QCM and AFM. The study is based on seven proteins (concanavalin A, cytochrome c, glucose oxidase, lysozyme, thyroglobulin, catalase, aldolase, and EF1-ATPase) in combination with seven electroactive marker ions ([Fe(CN)6]3-, [Fe(CN)6]4-, [Ru(NH3)6]3+, mono-, di-, and trimeric viologens), as well as a series of suppressor and enhancer ions leading to the following general statements: (i) electrostatic binding of charged marker ions to the domains of the protein is a prerequisite for an electrochemical current and (ii) charge propagation through the layer consists of electron hopping along surface-confined marker ions into the pores between adsorbed proteins. It is further shown that (iii) marker ions and suppressor ions with identical charge compete for oppositely charged sites on the protein domain, (iv) electrostatically bound multilayers of marker or enhancer ions with alternating charge form on a charged protein domain, and (v) self-exchange and exergonic ET catalysis between adsorbed marker ions and marker ions in solution take place. In addition to fundamental insight into the mechanism of charge propagation, valuable information for the design, optimization, and tailoring of new biosensors based on the ICS concept is demonstrated by the current findings.