A current perspective on insect gene transformation

Arthropod promoters for genetic control of disease vectors

Vector-borne diseases (VBDs) impose devastating effects on human health and a heavy financial burden. Malaria, Lyme disease, and dengue fever are just a few examples of VBDs that cause severe illnesses. The current strategies to control VBDs consist mainly of environmental modification and chemical use, and to a small extent, genetic approaches. The genetic approaches, including transgenesis/genome modification and gene-drive technologies, provide the basis for developing new tools for VBD prevention by suppressing vector populations or reducing their capacity to transmit pathogens. The regulatory elements such as promoters are required for a robust sex-, tissue-, and stage-specific transgene expression. As discussed in this review, information on the regulatory elements is available for mosquito vectors but is scant for other vectors.

Transposable elements and xenobiotic resistance

Transposable elements or TEs are well known drivers of adaptive change in plants and animals but their role in insecticide resistance remains poorly documented. This review examines the potential role of transposons in resistance and identifies key areas where our understanding remains unclear. Despite well-known model systems such as upregulation of Drosophila Cyp6g1, many putative examples lack functional validation. The potential types of transposon-associated changes that could lead to resistance are reviewed, including changes in up-regulation, message stability, loss of function and alternative splicing. Where potential mechanisms appear absent from the resistance literature examples are drawn from other areas of biology. Finally, ways are suggested in which transgenic expression could be used to validate the biological significance of TE insertion. In the absence of such functional expression studies many examples of the association of TEs and resistance genes therefore remain as correlations.

Autofluorescent Biomolecules in Diptera: From Structure to Metabolism and Behavior

Light-based phenomena in insects have long attracted researchers’ attention. Surface color distribution patterns are commonly used for taxonomical purposes, while optically-active structures from Coleoptera cuticle or Lepidoptera wings have inspired technological applications, such as biosensors and energy accumulation devices. In Diptera, besides optically-based phenomena, biomolecules able to fluoresce can act as markers of bio-metabolic, structural and behavioral features. Resilin or chitinous compounds, with their respective blue or green-to-red autofluorescence (AF), are commonly related to biomechanical and structural properties, helpful to clarify the mechanisms underlying substrate adhesion of ectoparasites’ leg appendages, or the antennal abilities in tuning sound detection. Metarhodopsin, a red fluorescing photoproduct of rhodopsin, allows to investigate visual mechanisms, whereas NAD(P)H and flavins, commonly relatable to energy metabolism, favor the investigation of sperm vitality. Lipofuscins are AF biomarkers of aging, as well as pteridines, which, similarly to kynurenines, are also exploited in metabolic investigations. Beside the knowledge available in Drosophila melanogaster, a widely used model to study also human disorder and disease mechanisms, here we review optically-based studies in other dipteran species, including mosquitoes and fruit flies, discussing future perspectives for targeted studies with various practical applications, including pest and vector control.

Nanopore long-read RNA-seq and absolute quantification delineate transcription dynamics in early embryo development of an insect pest

The olive fruit fly, Bactrocera oleae, is the most important pest for the olive fruit but lacks adequate transcriptomic characterization that could aid in molecular control approaches. We apply nanopore long-read RNA-seq with internal RNA standards allowing absolute transcript quantification to analyze transcription dynamics during early embryo development for the first time in this organism. Sequencing on the MinION platform generated over 31 million reads. Over 50% of the expressed genes had at least one read covering its entire length validating our full-length approach. We generated a de novo transcriptome assembly and identified 1768 new genes and a total of 79,810 isoforms; a fourfold increase in transcriptome diversity compared to the current NCBI predicted transcriptome. Absolute transcript quantification per embryo allowed an insight into the dramatic re-organization of maternal transcripts. We further identified Zelda as a possible regulator of early zygotic genome activation in B. oleae and provide further insights into the maternal-to-zygotic transition. These data show the utility of long-read RNA in improving characterization of non-model organisms that lack a fully annotated genome, provide potential targets for sterile insect technic approaches, and provide the first insight into the transcriptome landscape of the developing olive fruit fly embryo.

Metabolic pathway interruption: CRISPR/Cas9-mediated knockout of tryptophan 2,3-dioxygenase in Tribolium castaneum

The Tribolium castaneum vermilion gene encodes tryptophan 2,3-dioxygenase, a pivotal enzyme in the ommochrome pathway that is required for proper pigmentation of the eye. A white-eyed mutant strain of T. castaneum, vermilion^white (v^w), lacks eye pigmentation due to a deletion of unknown size that removes all but the 3'-end of the vermilion gene. To create a more defined mutation in vermilion, the CRISPR/Cas9-nuclease system was used to target wild type vermilion in preblastoderm T. castaneum embryos. As adults, all injected beetles had wild type (black) eye pigmentation; however, when outcrossed to v^w mates, one cross produced 19% white-eyed offspring. When the vermilion locus of these offspring was analyzed by target-site sequencing, it was determined that white-eyed individuals had a 2 bp deletion that resulted in a frame-shift mutation, presumably producing a nonfunctional enzyme. Interestingly, some of their black-eyed siblings also had a small deletion of 6 bp, but the resultant loss of two amino acids had no apparent impact on enzyme function. To establish a mutant strain homozygous for the CRISPR-induced knock-out allele, a CRISPR positive G₀ male was crossed to wild type females. Their progeny were self-crossed, and white-eyed progeny were used to establish the new strain. This mutant strain is herein named vermilion^ICE and will be used in future work in addition to or in place of v^w.

Delivery of Nucleic Acids through Embryo Microinjection in the Worldwide Agricultural Pest Insect, Ceratitis capitata

The Mediterranean fruit fly (medfly) Ceratitis capitata (Wiedemann) (Diptera: Tephritidae) is a pest species with extremely high agricultural relevance. This is due to its reproductive behavior: females damage the external surface of fruits and vegetables when they lay eggs and the hatched larvae feed on their pulp. Wild C. capitata populations are traditionally controlled through insecticide spraying and/or eco-friendly approaches, the most successful being the Sterile Insect Technique (SIT). The SIT relies on mass-rearing, radiation-based sterilization and field release of males that retain their capacity to mate but are not able to generate fertile progeny. The advent and the subsequent rapid development of biotechnological tools, together with the availability of the medfly genome sequence, has greatly boosted our understanding of the biology of this species. This favored the proliferation of new strategies for genome manipulation, which can be applied to population control. In this context, embryo microinjection plays a dual role in expanding the toolbox for medfly control. The ability to interfere with the function of genes that regulate key biological processes, indeed, expands our understanding of the molecular machinery underlying medfly invasiveness. Furthermore, the ability to achieve germ-line transformation facilitates the production of multiple transgenic strains that can be tested for future field applications in novel SIT settings. Indeed, genetic manipulation can be used to confer desirable traits that can, for example, be used to monitor sterile male performance in the field, or that can result in early life-stage lethality. Here we describe a method to microinject nucleic acids into medfly embryos to achieve these two main goals.

Control of the sheep blowfly in Australia and New Zealand--are we there yet?

The last 50 years of research into infections in Australia and New Zealand caused by larvae of the sheep blowfly, Lucilia cuprina, have significantly advanced our understanding of this blowfly and its primary host, the sheep. However, apart from some highly effective drugs it could be argued that no new control methodologies have resulted. This review addresses the major areas of sheep blowfly research over this period describing the significant outcomes and analyses, and what is still required to produce new commercial control technologies. The use of drugs against this fly species has been very successful but resistance has developed to almost all current compounds. Integrated pest management is becoming basic to control, especially in the absence of mulesing, and has clearly benefited from computer-aided technologies. Biological control has more challenges but natural and perhaps transformed biopesticides offer possibilities for the future. Experimental vaccines have been developed but require further analysis of antigens and formulations to boost protection. Genetic technologies may provide potential for long-term control through more rapid indirect selection of sheep less prone to flystrike. Finally in the future, genetic analysis of the fly may allow suppression and perhaps eradication of blowfly populations or identification of new and more viable targets for drug and vaccine intervention. Clearly all these areas of research offer potential new controls but commercial development is perhaps inhibited by the success of current chemical insecticides and certainly requires a significant additional injection of resources.

Mosquito transgenic technologies to reduce Plasmodium transmission

The ability to introduce genetic constructs of choice into the genome of Anopheles mosquitoes provides a valuable tool to study the molecular interactions between the Plasmodium parasite and its insect host. In the long term, this technology could potentially offer new ways to control vector-borne diseases through the suppression of target mosquito populations or through the introgression of traits that preclude pathogen transmission. Here, we describe in detail protocols for the generation of transgenic Anopheles gambiae mosquitoes based on germ-line transformation using either modified transposable elements or the site-specific PhiC31 recombinase.

Recombination technologies for enhanced transgene stability in bioengineered insects

Transposon-based vectors currently provide the most suitable gene transfer systems for insect germ-line transformation and are used for molecular improvement of the Sterile Insect Technique. However, the long time stability of genome-integrated transposon constructs depends on the absence of transposase activity that could remobilize the transposon-embedded transgenes. To achieve transgene stability transposon vectors are usually non-autonomous, lacking a functional transposase gene, and chosen so that endogenous or related transposon activities are not present in the host. Nevertheless, the non-autonomous transposon-embedded transgenes could become unstable by the unintended presence of a mobilizing transposase that may have been undetected or subsequently entered the host species by horizontal gene transfer. Since the field release of transgenic insects will present environmental concerns relating to large populations and high mobility, it will be important to ensure that transgene constructs are stably integrated for maintaining strain integrity and eliminating the possibility for unintentional transfer into the genome of another organism. Here we review efficient methods to delete or rearrange terminal repeat sequences of transposons necessary for their mobility, subsequent to their initial genomic integration. These procedures should prevent transposase-mediated remobilization of the transgenes, ensuring their genomic stability.

Towards the genetic control of insect vectors: An overview

Insects are responsible for the transmission of major infectious diseases. Recent advances in insect genomics and transformation technology provide new strategies for the control of insect borne pathogen transmission and insect pest management. One such strategy is the genetic modification of insects with genes that block pathogen development. Another is to suppress insect populations by releasing either sterile males or males carrying female-specific dominant lethal genes into the environment. Although significant progress has been made in the laboratory, further research is needed to extend these approaches to the field. These insect control strategies offer several advantages over conventional insecticide-based strategies. However, the release of genetically modified insects into the environment should proceed with great caution, after ensuring its safety, and acceptance by the target populations.

Genetic sexing through the use of Y-linked transgenes

Sterile insect technique (SIT)-based pest control programs rely on the mass release of sterile insects to reduce the wild target population. In many cases, it is desirable to release only males. Sterile females may cause damage, e.g., disease transmission by mosquitoes or crop damage via oviposition by the Mediterranean fruit fly (Medfly). Also, sterile females may decrease the effectiveness of released males by distracting them from seeking out wild females. To eliminate females from the release population, a suitable sexual dimorphism is required. For several pest species, genetic sexing strains have been constructed in which such a dimorphism has been induced by genetics. Classical strains were based on the translocation to the Y chromosome of a selectable marker, which is therefore expressed only in males. Recently, several prototype strains have been constructed using sex-specific expression of markers or conditional lethal genes from autosomal insertions of transgenes. Here, we describe a novel genetic sexing strategy based on the use of Y-linked transgenes expressing fluorescent proteins. We demonstrate the feasibility of this strategy in a major pest species, Ceratitis capitata (Wiedemann), and discuss the advantages and disadvantages relative to other genetic sexing methods and potential applicability to other species.

A database of wing diversity in the Hawaiian Drosophila

BACKGROUND

Within genus Drosophila, the endemic Hawaiian species offer some of the most dramatic examples of morphological and behavioral evolution. The advent of the Drosophila grimshawi genome sequence permits genes of interest to be readily cloned from any of the hundreds of species of Hawaiian Drosophila, offering a powerful comparative approach to defining molecular mechanisms of species evolution. A key step in this process is to survey the Hawaiian flies for characters whose variation can be associated with specific candidate genes. The wings provide an attractive target for such studies: Wings are essentially two dimensional, and genes controlling wing shape, vein specification, pigment production, and pigment pattern evolution have all been identified in Drosophila.

METHODOLOGY/PRINCIPAL FINDINGS

We present a photographic database of over 180 mounted, adult wings from 73 species of Hawaiian Drosophila. The image collection, available at FlyBase.org, includes 53 of the 112 known species of "picture wing" Drosophila, and several species from each of the other major Hawaiian groups, including the modified mouthparts, modified tarsus, antopocerus, and haleakalae (fungus feeder) groups. Direct image comparisons show that major wing shape changes can occur even between closely related species, and that pigment pattern elements can vary independently of each other. Among the 30 species closest to grimshawi, diverse visual effects are achieved by altering a basic pattern of seven wing spots. Finally, we document major pattern variations within species, which appear to result from reduced diffusion of pigment precursors through the wing blade.

CONCLUSIONS/SIGNIFICANCE

The database highlights the striking variation in size, shape, venation, and pigmentation in Hawaiian Drosophila, despite their generally low levels of DNA sequence divergence. In several independent lineages, highly complex patterns are derived from simple ones. These lineages offer a promising model system to study the evolution of complexity.

A novel target-specific gene delivery system combining baculovirus and sequence-specific long interspersed nuclear elements

Transposable elements are valuable for somatic and germ-line transformation. However, long interspersed nuclear elements (LINEs) have not been used because of poor information on the transposition mechanism. We have developed a novel gene delivery system combining baculovirus AcNPV and two silkworm LINEs, SART1 and R1, which integrate into specific sequences of telomeric repeats and 28S ribosomal DNA, respectively. When two LINEs containing the enhanced green fluorescent protein gene recombined into AcNPV were infected into fifth instar larvae of the silkworm, we observed target-specific retrotransposition of LINEs at 72h post-infection, using polymerase chain reaction amplification and sequencing. Telomere- and 28S rDNA-specific transposition occurred in all nine tissues tested, including the ovary and testis. This is the first demonstration of site-specific gene delivery in living larvae. Insertion efficiencies were dependent on the virus titer for injection and the host strains of Bombyx mori. Using this system, we successfully detected the intergeneration transmission of retrotransposed sequences. In addition, AcNPV-mediated SART1 also transposed into telomere of another lepidopteran, Orgyia recens, suggesting that this system is useful for a wide variety of AcNPV-infectious insects. Site-specific gene delivery by virus-mediated LINE will be a potential gene therapy tool to avoid harmful unexpected insertions.

Engineering mutations: deconstructing the mouse gene by gene

Over the past years new vectors and methodologies have been developed to carry out large-scale genome-wide insertional mutagenesis screens in the mouse. Gene trapping, the most commonly used technique, is based on the insertion of a retroviral- or plasmid-based vector into a gene, resulting in a loss-of-function mutation, while simultaneously reporting its expression pattern and providing a molecular tag to facilitate cloning. The discovery of vertebrate DNA transposons in the mouse and recent improvements has also led to their increased use in insertional mutagenesis screens. Several public resources have been set-up recently by the academic community to distribute information and materials generated from these large-scale screens. These new resources should accelerate the study and understanding of biological and developmental processes.

SmTRC1, a novel Schistosoma mansoni DNA transposon, discloses new families of animal and fungi transposons belonging to the CACTA superfamily

Background

The CACTA (also called En/Spm) superfamily of DNA-only transposons contain the core sequence CACTA in their Terminal Inverted Repeats (TIRs) and so far have only been described in plants. Large transcriptome and genome sequence data have recently become publicly available for Schistosoma mansoni, a digenetic blood fluke that is a major causative agent of schistosomiasis in humans, and have provided a comprehensive repository for the discovery of novel genes and repetitive elements. Despite the extensive description of retroelements in S. mansoni, just a single DNA-only transposon belonging to the Merlin family has so far been reported in this organism.

Results

We describe a novel S. mansoni transposon named SmTRC1, for S. mansoni Transposon Related to CACTA 1, an element that shares several characteristics with plant CACTA transposons. Southern blotting indicates approximately 30–300 copies of SmTRC1 in the S. mansoni genome. Using genomic PCR followed by cloning and sequencing, we amplified and characterized a full-length and a truncated copy of this element. RT-PCR using S. mansoni mRNA followed by cloning and sequencing revealed several alternatively spliced transcripts of this transposon, resulting in distinct ORFs coding for different proteins. Interestingly, a survey of complete genomes from animals and fungi revealed several other novel TRC elements, indicating new families of DNA transposons belonging to the CACTA superfamily that have not previously been reported in these kingdoms. The first three bases in the S. mansoni TIR are CCC and they are identical to those in the TIRs of the insects Aedes aegypti and Tribolium castaneum, suggesting that animal TRCs may display a CCC core sequence.

Conclusion

The DNA-only transposable element SmTRC1 from S. mansoni exhibits various characteristics, such as generation of multiple alternatively-spliced transcripts, the presence of terminal inverted repeats at the extremities of the elements flanked by direct repeats and the presence of a Transposase_21 domain, that suggest a distant relationship to CACTA transposons from Magnoliophyta. Several sequences from other Metazoa and Fungi code for proteins similar to those encoded by SmTRC1, suggesting that such elements have a common ancestry, and indicating inheritance through vertical transmission before separation of the Eumetazoa, Fungi and Plants.

Excision and transposition of piggyBac transposable element in tobacco budworm embryos

The TTAA-specific lepidopteran transposon piggyBac has already proved useful as a gene-transfer vector for efficient transformation of a wide variety of insects. Transposable element excision and transposition assays are useful indicators of an element's ability to be mobilized in vivo and, thus, potentially serve as a transforming vector. Here, we report that this transposon is capable of excision and transposition in tobacco budworm embryos with relatively low frequency.

Identification of the Boudicca and Sinbad retrotransposons in the genome of the human blood fluke Schistosoma haematobium

Schistosomes have a comparatively large genome, estimated for Schistosoma mansoni to be about 270 megabase pairs (haploid genome). Recent findings have shown that mobile genetic elements constitute significant proportions of the genomes of S. mansoni and S. japonicum. Much less information is available on the genome of the third major human schistosome, S. haematobium. In order to investigate the possible evolutionary origins of the S. mansoni long terminal repeat retrotransposons Boudicca and Sinbad, several genomes were searched by Southern blot for the presence of these retrotransposons. These included three species of schistosomes, S. mansoni, S. japonicum, and S. haematobium, and three related platyhelminth genomes, the liver flukes Fasciola hepatica and Fascioloides magna and the planarian, Dugesia dorotocephala. In addition, Homo sapiens and three snail host genomes, Biomphalaria glabrata, Oncomelania hupensis, and Bulinus truncatus, were examined for possible indications of a horizontal origin for these retrotransposons. Southern hybridization analysis indicated that both Boudicca and Sinbad were present in the genome of S. haematobium. Furthermore, low stringency Southern hybridization analyses suggested that a Boudicca-like retrotransposon was present in the genome of B. truncatus, the snail host of S. haematobium.

High efficiency site-specific genetic engineering of the mosquito genome

Current techniques for the genetic engineering of insect genomes utilize transposable genetic elements, which are inefficient, have limited carrying capacity and give rise to position effects and insertional mutagenesis. As an alternative, we investigated two site-specific integration mechanisms in the yellow fever mosquito, Aedes aegypti. One was a modified CRE/lox system from phage P1 and the other a viral integrase system from Streptomyces phage phi C31. The modified CRE/lox system consistently failed to produce stable germline transformants but the phi C31 system was highly successful, increasing integration efficiency by up to 7.9-fold. The ability to efficiently target transgenes to specific chromosomal locations and the potential to integrate very large transgenes has broad applicability to research on many medically and economically important species.

Site-specific genomic targeting in Drosophila

Transcriptional regulation of transgenes depends upon genomic localization in higher eukaryotes. For the applied use of transgenic organisms as producers of pharmaceutically relevant proteins or as pest population control agents, a method to make transgene expression predictable is highly desirable. A targeting method that allows precise cassette replacement comprising solely genes of interest (without extraneous donor vector sequences) would be highly advantageous for insects and other multicellular organisms. In this report, we describe a method for transgene targeting to predefined chromosomal sites in Drosophila by using a transposon vector that, once integrated in the germ line, acts as an acceptor site for donor vectors. To make recombinational insertions irreversible, a FLP recombinase-mediated cassette exchange strategy was used, and to enhance donor-target pairing, a homing sequence from the linotte locus was used. Site-specific recombinants were screened by interconvertible eye fluorescence marker phenotypes yielding, on average, targeted insertions at a frequency of 23%. The cassette exchange system provides for repetitive integrations into the same locus, allowing comparative analysis of true transgenic alleles. Furthermore, this method was used to stabilize a targeted transgene by the postintegration excision of putatively mobile transposon sequences. The genomic targeting and stabilization strategy described for Drosophila should be applicable to other insects, specifically for the goals of optimizing heterologous protein expression and enhancing ecological safety of transgenic strains intended for release in biocontrol programs.

Precocious metamorphosis in transgenic silkworms overexpressing juvenile hormone esterase

Insect growth and development are intricately regulated by the titers of juvenile hormones (JHs) and ecdysteroids (and/or their metabolites) in the insect hemolymph. Hydrolysis of the methyl ester of JH by a JH-specific esterase (JHE) is a key pathway for the degradation of JH. Here, we generate transgenic silkworm strains that overexpress JHE by using the binary GAL4/UAS system. Overexpression of JHE from the embryonic stage resulted in larval-pupal metamorphosis after the third stadium, two stadia earlier than that observed in wild-type insects. This precocious metamorphosis suggests that JHs are not critical for normal development of embryo or larva before the second molt in Lepidoptera (moths and butterflies). Our transgenic approach allowed us to dissect the function of key physiological events that occur from embryogenesis. Until now, these types of studies were possible only in later larval stadia by using physical techniques such as allatectomy or the application of JH analogues. We believe that our system will allow further pioneering studies in insect physiology.

Minos as a genetic and genomic tool in Drosophila melanogaster

Much of the information about the function of D. melanogaster genes has come from P-element mutagenesis. The major drawback of the P element, however, is its strong bias for insertion into some genes (hotspots) and against insertion into others (coldspots). Within genes, 5'-UTRs are preferential targets. For the successful completion of the Drosophila Genome Disruption Project, the use of transposon vectors other than P will be necessary. We examined here the suitability of the Minos element from Drosophila hydei as a tool for Drosophila genomics. Previous work has shown that Minos, a member of the Tc1/mariner family of transposable elements, is active in diverse organisms and cultured cells; it produces stable integrants in the germ line of several insect species, in the mouse, and in human cells. We generated and analyzed 96 Minos integrations into the Drosophila genome and devised an efficient "jump-starting" scheme for production of single insertions. The ratio of insertions into genes vs. intergenic DNA is consistent with a random distribution. Within genes, there is a statistically significant preference for insertion into introns rather than into exons. About 30% of all insertions were in introns and approximately 55% of insertions were into or next to genes that have so far not been hit by the P element. The insertion sites exhibit, in contrast to other transposons, little sequence requirement beyond the TA dinucleotide insertion target. We further demonstrate that induced remobilization of Minos insertions can delete nearby sequences. Our results suggest that Minos is a useful tool complementing the P element for insertional mutagenesis and genomic analysis in Drosophila.

Establishing genetic transformation for comparative developmental studies in the crustacean Parhyale hawaiensis

The amphipod crustacean Parhyale hawaiensis has been put forward as an attractive organism for evolutionary developmental comparisons, and considerable effort is being invested in isolating developmental genes and studying their expression patterns in this species. The scope of these studies could be significantly expanded by establishing means for genetic manipulation that would enable direct studies of gene functions to be carried out in this species. Here, we report the use of the Minos transposable element for the genetic transformation of P. hawaiensis. Transformed amphipods can be obtained from approximately 30% of surviving individuals injected with both a Minos element carrying the 3xP3-DsRed fluorescent marker and with mRNA encoding the Minos transposase. Integral copies of the transposon are inserted into the host genome and are stably inherited through successive generations. We have used reporter constructs to identify a muscle-specific regulatory element from Parhyale, demonstrating that this transformation vector can be used to test the activity of cis-regulatory elements in this species. The relatively high efficiency of this transgenic methodology opens new opportunities for the direct study of cis-regulatory elements and gene functions in Parhyale, allowing functional studies to be carried out beyond previously established model systems in insects.

Efficient transformation of the beetle Tribolium castaneum using the Minos transposable element: quantitative and qualitative analysis of genomic integration events

Genetic transformation in insects holds great promise as a tool for genetic manipulation in species of particular scientific, economic, or medical interest. A number of transposable elements have been tested recently as potential vectors for transformation in a range of insects. Minos is one of the most promising elements because it appears to be active in diverse species and has the capacity to carry large inserts. We report here the use of the Minos element as a transformation vector in the red flour beetle Tribolium castaneum (Coleoptera), an important species for comparative developmental and pest management studies. Transgenic G(1) beetles were recovered from 32.4% of fertile G(0)'s injected with a plasmid carrying a 3xP3-EGFP-marked transposon and in vitro synthesized mRNA encoding the Minos transposase. This transformation efficiency is 2.8-fold higher than that observed when using a plasmid helper. Molecular and genetic analyses show that several independent insertions can be recovered from a single injected parent, but that the majority of transformed individuals carry single Minos insertions. These results establish Minos as one of the most efficient vectors for genetic transformation in insects. In combination with piggyBac-based transgenesis, our work allows the introduction of sophisticated multicomponent genetic tools in Tribolium.

Isolation of white gene orthologue of the sawfly, Athalia rosae (Hymenoptera) and its functional analysis using RNA interference

We isolated and characterized the white gene orthologue of the sawfly, Athalia rosae (Hymenoptera). The A. rosae white (Ar white) cDNA cloned was 2058-bp long encoding 685 amino acids in a single open reading frame (ORF). Comparison of the cDNA sequence with the genomic DNA sequence revealed that the ORF was derived from 11 exons. Ar white was a single copy gene as evidenced by genomic Southern blotting and its cytological localization on the metaphase chromosomes. The deduced amino acid sequence aligned well with known insect white orthologous gene products sharing conserved regions such as the ATP-binding motif and the six transmembrane-spanning segments. Expression of Ar white was detected at embryonic and pupal stages by Northern blotting. In situ hybridization detected the embryonic expression in a pair of the lateral tips of protocephalic placodes from where optic organs are formed. Ar white function was examined using double-stranded RNA (dsRNA)-mediated interference. The synthesized dsRNA targeting Ar white transcripts caused a decrease in the level of the original mRNAs, and resulted in the white phenocopy in the embryonic eye pigmentation when microinjected into eggs from wild-type females. The effects occurred in a dose-dependent manner.

Post-integration stabilization of a transposon vector by terminal sequence deletion in Drosophila melanogaster

Germline transformation systems for nearly 20 insect species have been derived from transposable elements, allowing the development of transgenic insects for basic and applied studies. These systems use a defective nonautonomous vector that results in stable vector integrations after the disappearance of transiently provided transposase helper plasmid, which is essential to maintain true breeding lines and consistent transgene expression that would otherwise be lost after vector remobilization. The risk of remobilization by an unintended transposase source has so far not been a concern for laboratory studies, but the prospective use of millions of transgenic insects in biocontrol programs will likely increase the risk, therefore making this a critical issue for the ecological safety of field release programs. Here we describe an efficient method that deletes a terminal repeat sequence of a transposon vector after genomic integration. This procedure prevents transposase-mediated remobilization of the other terminal sequence and associated genes, ensuring their genomic stability.

Postlarval fitness of transgenic strains of Cochliomyia hominivorax (Diptera: Calliphoridae)

Eight transgenic strains of Cochliomyia hominivorax (Coquerel) (Diptera: Calliphoridae) were compared with the wild-type parental laboratory strain (P95) in colony. Measurements of average weight of pupae, percentage of adults emerging from pupae, ratio of males to total emerged adults, and mating competitiveness were analyzed. The parental strain colony was subcultured and exposed to handling procedures equivalent to transgenic strains for valid comparison of overall colony fitness. None of the transgenic colonies exhibited significantly lower fitness characteristics than the control parental colony. One transgenic colony had a higher ratio of adults emerging from pupae, and five colonies had higher average pupal weight; because fitness cost would only be indicated by lower values, the statistical variations were not significant. Males of one transgenic strain were shown to mate with equal frequency compared with males of the parental strain. Hence, the presence of the transgene used to produce the strains tested did not incur a fitness cost to the colonies of laboratory-reared C. hominivorax.

A complementary transposon tool kit for Drosophila melanogaster using P and piggyBac

With the availability of complete genome sequence for Drosophila melanogaster, one of the next strategic goals for fly researchers is a complete gene knockout collection. The P-element transposon, the workhorse of D. melanogaster molecular genetics, has a pronounced nonrandom insertion spectrum. It has been estimated that 87% saturation of the approximately 13,500-gene complement of D. melanogaster might require generating and analyzing up to 150,000 insertions. We describe specific improvements to the lepidopteran transposon piggyBac and the P element that enabled us to tag and disrupt genes in D. melanogaster more efficiently. We generated over 29,000 inserts resulting in 53% gene saturation and a more diverse collection of phenotypically stronger insertional alleles. We found that piggyBac has distinct global and local gene-tagging behavior from that of P elements. Notably, piggyBac excisions from the germ line are nearly always precise, piggyBac does not share chromosomal hotspots associated with P and piggyBac is more effective at gene disruption because it lacks the P bias for insertion in 5' regulatory sequences.

Insect transgenesis and its potential role in agriculture and human health

The ability to genetically engineer insects other than Drosophila melanogaster has further extended modern genetic techniques into important insect pest species ranging from fruit fly pests of horticulture to mosquito vectors of human disease. In only a relatively short period of time, a range of transgenes have been inserted into more than 10 insect pest species. Genetic transformation of these pest species has proven to be a very important laboratory tool in analyzing gene function and effects on phenotype however the full extension of this technology into the field is yet to be realized. Here we briefly review the development of transgenic technology in pest insect species and discuss the challenges that remain in this applied area of insect genetics and entomology.

Medfly transposable elements: diversity, evolution, genomic impact and possible applications

The medfly genome has been shown to contain a rich assortment of transposable elements from the mariner, Tc1, hAT and gypsy/Ty3 families. These elements display different levels of diversity, abundance and distribution in the genome. The presence of actively transposing elements in the medfly genome is revealed by hybrid dysgenesis phenomena, insertion site polymorphisms and other genetic instabilities. The medfly has been a target of transformation studies involving the exogenous elements Minos, Hermes and piggyBac from three families. The presence of active endogenous homologous elements can have important implications for the stability of such transgenic lines. The potential applications of endogenous elements for medfly population analysis and control are discussed.

Bactrocera tryoni and closely related pest tephritids--molecular analysis and prospects for transgenic control strategies

Bactrocera tryoni is a serious pest of horticulture in eastern Australia. Here we review molecular data relevant to pest status and development of a transformation system for this species. The development of transformation vectors for non-drosophilid insects has opened the door to the possibility of improving the sterile insect technique (SIT), by genetically engineering factory strains of pest insects to produce male-only broods. Transposition assays indicate that all five of the vectors currently used for transformation in non-drosophilid species have the potential to be useful as transformation vectors in B. tryoni. Evidence of cross mobilization of hobo by an endogenous Homer element emphasises the necessity to understand the endogenous transposons within a species. The sex-specific doublesex and yolk protein genes have been characterized with a view to engineering a female-specific lethal gene or modifying gene expression through RNA interference (RNAi). Data are presented which indicate the potential of RNAi to modify the sex ratio of resultant broods. An understanding of how pest status is determined and maintained is being addressed through the characterization of genes of the circadian clock that enable the fly to adapt to environmental cues. Such an understanding will be useful in the future to the effective delivery of sophisticated pest control measures.

Understanding and improving transgene stability and expression in insects for SIT and conditional lethal release programs

Genetically transformed insect pests provide significant opportunities to create strains for improved sterile insect technique and new strategies based on conditional lethality. A major concern for programs that rely on the release of transgenic insects is the stability of the transgene, and maintenance of consistent expression of genes of interest within the transgene. Transgene instability would influence the integrity of the transformant strain upon which the effectiveness of the biological control program depends. Loss or intra-genomic transgene movement would result in strain attributes important to the program being lost or diminished, and the mass-release of such insects could significantly exacerbate the insect pest problem. Instability resulting in intra-genomic movement may also be a prelude to inter-genomic transgene movement between species resulting in ecological risks. This is less of a concern for short-term releases, where transgenic insects are not expected to survive in the environment beyond two or three generations. Transgene movement may occur, however, into infectious agents during mass-rearing, and the potential for movement after release is a possibility for programs using many millions of insects. The primary methods of addressing potential transgene instability relate to an understanding of the vector system used for gene transfer, the potential for its mobilization by the same or a related vector system, and methods required to identify transformants and determine if unexpected transgene movement has occurred. Methods also exist for preventing transposon-mediated mobilization, by deleting or rearranging vector sequences required for transposition using recombination systems. Stability of transgene expression is also a critical concern, especially in terms of potential epigenetic interactions with host genomes resulting in gene silencing that have been observed in plants and fungi, and it must be determined if this or related phenomena can occur in insects.

Targeted Gene Expression Using the GAL4/UAS System in the Silkworm Bombyx mori

The silkworm Bombyx mori is one of the most well-studied insects in terms of both genetics and physiology and is recognized as the model lepidopteran insect. To develop an efficient system for analyzing gene function in the silkworm, we investigated the feasibility of using the GAL4/UAS system in conjunction with piggyBac vector-mediated germ-line transformation for targeted gene expression. To drive the GAL4 gene, we used two endogenous promoters that originated from the B. mori actin A3 (BmA3) and fibroin light-chain (FiL) genes and the artificial promoter 3xP3. GFP was used as the reporter. In initial tests of the function of the GAL4/UAS system, we generated transgenic animals that carried the UAS-GFP construct plus either BmA3-GAL4 or 3xP3-GAL4. GFP fluorescence was observed in the tissues of GFP-positive animals, in which both promoters drove GAL4 gene expression. Animals that possessed only the GAL4 gene or UAS-GFP construct did not show GFP fluorescence. In addition, as a further test of the ability of the GAL4/UAS system to drive tissue-specific expression we constructed FiL-GAL4 lines with 3xP3-CFP as the transformation marker. FiL-GAL4 × UAS-GFP crosses showed GFP expression in the posterior silk gland, in which the endogenous FiL gene is normally expressed. These results show that the GAL4/UAS system is applicable to B. mori and emphasize the potential of this system for controlled analyses of B. mori gene function.

The dual function of ovo/shavenbaby in germline and epidermis differentiation is conserved between Drosophila melanogaster and the olive fruit fly Bactrocera oleae

The olive fruit fly Bactrocera oleae (B. oleae) is a major olive damaging pest in the Mediterranean area. As a first molecular analysis of a developmental gene in this insect, we characterised the ovo/shavenbaby (ovo/svb) gene. In Drosophila, ovo/svb encodes a family of transcription regulators with two distinct functions: ovo is required for female germline differentiation and svb controls morphogenesis of epidermal cells. Here, we report the cloning and characterisation of ovo/svb in B. oleae, showing that the ovo genomic organisation and complex pattern of germline transcription have been conserved between distantly related Dipterae. We further show that B. oleae svb embryonic expression precisely prefigures the pattern of larval trichomes, supporting the conclusion that regulatory changes in svb transcription underlie evolutionary diversification of trichome patterns seen among Dipterae.

United States Department of Agriculture-Agricultural Research Service: advances in the molecular genetic analysis of insects and their application to pest management

USDA-ARS scientists have made important contributions to the molecular genetic analysis of agriculturally important insects, and have been in the forefront of using this information for the development of new pest management strategies. Advances have been made in the identification and analysis of genetic systems involved in insect development, reproduction and behavior which enable the identification of new targets for control, as well as the development of highly specific insecticidal products. Other studies have been on the leading edge of developing gene transfer technology to better elucidate these biological processes though functional genomics and to develop new transgenic strains for biological control. Important contributions have also been made to the development and use of molecular markers and methodologies to identify and track insect populations. The use of molecular genetic technology and strategies will become increasingly important to pest management as genomic sequencing information becomes available from important pest insects, their targets and other associated organisms.

Germline transformation of the sawfly, Athalia rosae (Hymenoptera: Symphyta), mediated by a piggyBac-derived vector

A piggyBac construct carrying two green fluorescent protein (GFP)-coding sequences one driven by Bombyx mori actin gene promoter and the other by Drosophila melanogaster heat-shock protein 70 (hsp70) promoter were injected together with a nonautonomous helper plasmid containing an active piggyBac transposase gene into the posterior end of mature unfertilized eggs dissected from the ovaries of Athalia rosae (Hymenoptera: Symphyta). These injected eggs, which developed as haploid male embryos upon artificial activation, were cultured to adulthood. Of 278 injected eggs, 61 grew to G(0) haploid adult males. These G(0) haploid males were individually mated to diploid females. The progeny embryos (G(1) generation) were examined for GFP expression. Four GFP-positive embryos (from three independent G(0) matings) were obtained. Two eclosed as diploid adult G(1) females. Mature unfertilized eggs dissected from the GFP-positive G(1) diploid females were activated artificially, and the resultant embryos were examined for GFP expression, separated and cultured to adulthood (G(2) generation). The G(2) haploid embryos segregated to GFP-positive and -negative individuals. By mating the G(2) adult haploid males individually to diploid females, stocks were established in which the piggyBac construct was stably integrated into the genome, as evidenced by GFP expression and Southern blot hybridization. The piggyBac transposition occurred at its canonical target TTAA sequence. These results, which demonstrate the first successful stable transposon-mediated germline transformation in Hymenoptera, will expand the usefulness of the piggyBac vector.

Innovations: applications of insect transgenesis

The recent establishment of broadly applicable genetic transformation systems will allow the analysis of gene function in diverse insect species. This will increase our understanding of developmental and evolutionary biology. Furthermore, insect transgenesis will provide new strategies for insect pest management and methods to impair the transmission of pathogens by human disease vectors. However, these powerful techniques must be applied with great care to avoid harm to our environment.

Reversing Wolbachia-based population replacement

Genetic manipulation that reduces the competence of a vector population to transmit pathogens would provide a useful tool to complement current control strategies, which are based primarily on the reduction/exclusion of vector populations and the prophylactic/therapeutic treatment of the vertebrate host population. Genetic drive is an important component of vector population replacement strategies, facilitating the replacement of natural populations with a genetically modified population. Genetic drive is reviewed here, emphasizing strategies that would employ infections of intracellular Wolbachia bacteria as a vehicle for population replacement. Also discussed are strategies for the retarding, arresting or reversing of Wolbachia-based population replacement. These strategies are based upon altering the conditions required for transgene invasion and are a prudent safeguard, should unexpected detrimental effects become associated with transgene spread.

piggyBac-based insertional mutagenesis and enhancer detection as a tool for functional insect genomics

Transposon mutagenesis provides a fundamental tool for functional genomics. Here we present a non-species-specific, combined enhancer detection and binary expression system based on the transposable element piggyBac: For the different components of this insertional mutagenesis system, we used widely applicable transposons and distinguishable broad-range transformation markers, which should enable this system to be operational in nonmodel arthropods. In a pilot screen in Drosophila melanogaster, piggyBac mutator elements on the X chromosome were mobilized in males by a Hermes-based jumpstarter element providing piggyBac transposase activity under control of the alpha1-tubulin promoter. As primary reporters in the piggyBac mutator elements, we employed the heterologous transactivators GAL4delta or tTA. To identify larval and adult enhancer detectors, strains carrying UASp-EYFP or TRE-EYFP as secondary reporter elements were used. Tissue-specific enhancer activities were readily observed in the GAL4delta/UASp-based systems, but only rarely in the tTA/TRE system. Novel autosomal insertions were recovered with an average jumping rate of 80%. Of these novel insertions, 3.8% showed homozygous lethality, which was reversible by piggyBac excision. Insertions were found in both coding and noncoding regions of characterized genes and also in noncharacterized and non-P-targeted CG-number genes. This indicates that piggyBac will greatly facilitate the intended saturation mutagenesis in Drosophila.

A transgene-based, embryo-specific lethality system for insect pest management

Biological approaches to insect pest management offer alternatives to pesticidal control. In area-wide control programs that cover entire regions, the sterile insect technique (SIT) can be used to successfully suppress economically important pest species by the mass release of sterilized pest organisms. However, conventional sterilization by ionizing radiation reduces insect fitness, which can result in reduced competitiveness of the sterilized insects. Here we report a transgene-based, dominant embryonic lethality system that allows for generation of large quantities of competitive but sterile insects without the need of irradiation. The system involves the ectopic expression of a hyperactive pro-apoptotic gene that causes embryo-specific lethality when driven by the tetracycline-controlled transactivator (tTA) under the regulation of a cellularization gene enhancer-promoter. We have successfully tested this system in Drosophila melanogaster. The embryonic lethality can be suppressed maternally, which will allow it to be combined with transgenic female-specific lethality systems to raise only vigorous but sterile males.

Cell-specific expression of enhanced green fluorescence protein under the control of neuropeptide gene promoters in the brain of the silkworm, Bombyx mori, using Bombyx mori nucleopolyhedrovirus-derived vectors

Using the larvae of the silkworm, Bombyx mori, we examined the baculovirus expression vector system for the expression of the enhanced green fluorescence protein (EGFP) gene under the control of several gene promoters in vivo. To investigate the gene-delivery efficiency of the baculovirus into various larval tissues, we constructed two recombinant baculoviruses carrying the EGFP gene downstream of the Drosophila melanogaster hsp70 gene promoter from B. mori nucleopolyhedrovirus (BmNPV) and Autographa californica nucleopolyhedrovirus (AcNPV). After injection of these recombinant baculoviruses into newly ecdysed 5th instar larvae, hsp70::EGFP-BmNPV, but not hsp70::EGFP-AcNPV, caused intense expression of EGFP not only in various non-neural tissues, but also in the neural organs including the brain 5 days postinfection. To investigate the cell-specific expression in the brain, we constructed recombinant C4/B3::EGFP-BmNPV and PTTH::EGFP-BmNPV which carry the EGFP gene under the control of bombyxin B3 and prothoracicotropic hormone (PTTH) gene promoters, respectively. Injection of these recombinant baculoviruses caused specific expression of EGFP with a high gene-expression efficiency in the neurosecretory cells of the brain depending on the neurohormone gene promoters. Present results indicate that this in vivo gene-expression system mediated by the baculovirus can serve as an efficient system permitting gene delivery into neural tissues in insects.

Stable transformation of a Mamestra brassicae (lepidoptera) cell line with the lepidopteran-derived transposon piggyBac

Cabbage moth cells were transfected with the vector pBac[3xP3-EGFPafm] and helper phsp-pBac. Seventeen percent of the transfected cells showed stable EGFP-expression. This indicates successful and stable transformation of M. brassicae cells with a piggyBac-derived vector. Genomic integration of Bac[3xP3-EGFPafm] in stably transformed cells was confirmed by Southern blots and inverse PCR. Since the integrations are stable, and transfection with pBac[3xP3-EGFPafm] alone did not yield in transformations, no cross-reacting transposase activity seems present in M. brassicae cells. Moreover, Southern blotting with a probe for piggyBac transposase indicated the absence of piggyBac-related elements in the genome of Mamestra brassicae. Due to the tissue specificity of the 3xP3-EGFP marker for eye and nervous tissues, it is intriguing that 3xP3-EGFP can successfully be used to identify stably transformed M. brassicae cells of cell line IZD-MB0503, which is hemocyte-derived. Sequence analysis of the insertion sites showed that piggyBac inverted repeats were adjacent to TTAA sequences on both termini in all the clones. The present results are particularly important as they suggest that piggyBac can be used for transgenesis of cabbage moth cells.

Penelope retroelements from Drosophila virilis are active after transformation of Drosophila melanogaster

The Penelope family of retroelements was first described in species of the Drosophila virilis group. Intact elements encode a reverse transcriptase and an endonuclease of the UvrC type, which may play a role in Penelope integration. Penelope is a key element in the induction of D. virilis hybrid dysgenesis, which involves the mobilization of several unrelated families of transposable elements. We here report the successful introduction of Penelope into the germ line of Drosophila melanogaster by P element-mediated transformation with three different constructs. Penelope is actively transcribed in the D. melanogaster genome only in lines transformed with a construct containing a full-length Penelope clone. The transcript is identical to that detected in D. virilis dysgenic hybrids. Most newly transposed Penelope elements have a very complex organization. Significant proliferation of Penelope copy number occurred in some lines during the 24-month period after transformation. The absence of copy number increase with two other constructs suggests that the 5' andor 3' UTRs of Penelope are required for successful transposition in D. melanogaster. No insect retroelement has previously been reported to be actively transcribed and to increase in copy number after interspecific transformation.

Fluorescent transformation markers for insect transgenesis

The first effectively achieved germ-line transformations of non-drosophilid insects were based on mutant rescue of eye color phenotypes. However, for most insect species neither visible mutants nor corresponding cloned genes are available. Therefore, the development of broadly applicable and reliable transformation markers will be of great importance to fully exploit the enormous potential transgenic insect technology has to offer. Here we review transposon-mediated germ-line transformation approaches that employ green fluorescent protein (GFP) variants to identify successful gene transfer. Furthermore, we provide novel data on the use of DsRed as an additional red fluorescent transformation marker for insect transgenesis. In conclusion, fluorescent proteins controlled by suitable strong promoters possess ideal characteristics to serve as transformation markers for a wide range of insect species.

Genetic engineering in insects of agricultural importance

The past five years have witnessed the extension of genetic transformation techniques into 11 insect species covering four orders within the Insecta. While the robustness of these transformation systems can be improved, there is now a highly likely probability that transformation of a given insect species will ensue, provided transposable element-containing plasmid DNA can be effectively delivered to the embryo or some other life stage. These developments have shifted emphasis to concerns of transgene stability and the regulation of the rearing and release of these transgenic insects. They have also led to some elegant demonstrations of genetic sexing mechanisms in Drosophila melanogaster with the expectation that similar systems be extended into pest insect species. These developments and issues are discussed in this short review.

Transgene expression from the Tribolium castaneum Polyubiquitin promoter

The highly conserved Ubiquitin proteins are expressed from genes with strong, constitutively active promoters in many species, making these promoters attractive candidates for use in driving transgene expression. Here we report the cloning and characterization of the Tribolium castaneum Polyubiquitin (TcPUb) gene. We placed the TcPUb promoter upstream of the coding region of the T. castaneum eye-colour gene Tc vermilion (Tcv) and injected this construct into embryos from a Tcv-deficient strain. Transient expression of Tcv during embryogenesis resulted in complete rescue of the larval mutant phenotype. We then incorporated the TcPUb-Tcv chimera into a piggyBac donor. Resulting germline transformants were easily recognized by rescue of eye pigmentation, illustrating the potential of the TcPUb promoter for use in driving transgene expression.

Use of the piggyBac transposon for germ-line transformation of insects

Germ-line transformation of insects is now possible with four independent transposable element vector systems. Among these, the TTAA-insertion site specific transposon, piggyBac, discovered in Trichoplusia ni, is one of the most widely used. Transformations have been achieved in a wide variety of dipterans, lepidopterans, and a coleopteran, and for many species, piggyBac transposition was first tested by plasmid-based mobility assays in cell lines and embryos. All plasmid and genomic insertions are consistent with the duplication of a TTAA insertion site, and most germ-line integrations appear to be stable, though this is largely based on stable marker phenotypes. Of the vector systems presently in use for non-drosophilids, piggyBac is the only one not currently associated with a superfamily of transposable elements, though other elements exist that share its TTAA insertion site specificity. While functional piggyBac elements have only been isolated from T. ni, nearly identical elements have been discovered in a dipteran species, Bactrocera dorsalis, and closely related elements exist in another moth species, Spodoptera frugiperda. It appears that piggyBac has recently traversed insect orders by horizontal transmission, possibly mediated by a baculovirus or other viral system. This interspecies movement has important implications for the practical use of piggyBac to create transgenic insect strains for field release.

Germ-line transformation of the South American malaria vector, Anopheles albimanus, with a piggyBac/EGFP transposon vector is routine and highly efficient

Stable and efficient germ-line transformation was achieved in the South American malaria vector, Anopheles albimanus, using a piggyBac vector marked with an enhanced green fluorescent protein gene regulated by the Drosophila melanogaster polyubiquitin promoter. Transgenic mosquitoes were identified from four independent experiments at frequencies ranging from 20 to 43% per fertile G0. Fluorescence was observable throughout the body of larvae and pupae, and abdominal segments of adults. Transgenic lines analysed by Southern hybridization had one to six germ-line integrations, with most lines having three or more integrations. Hybridized transposon vector fragments and insertion site sequences were consistent with precise piggyBac-mediated integrations, although this was not verified for all lines. The piggyBac/PUbnlsEGFP vector appears to be a robust transformation system for this anopheline species, in contrast to the use of a piggyBac vector in An. gambiae. Further tests are needed to determine if differences in anopheline transformation efficiency are due to the marker systems or to organismal or cellular factors specific to the species.