1.8 A crystal structure of the C-terminal domain of rabbit serum haemopexin

Matrix Metalloproteinases: From Molecular Mechanisms to Physiology, Pathophysiology, and Pharmacology

The first matrix metalloproteinase (MMP) was discovered in 1962 from the tail of a tadpole by its ability to degrade collagen. As their name suggests, matrix metalloproteinases are proteases capable of remodeling the extracellular matrix. More recently, MMPs have been demonstrated to play numerous additional biologic roles in cell signaling, immune regulation, and transcriptional control, all of which are unrelated to the degradation of the extracellular matrix. In this review, we will present milestones and major discoveries of MMP research, including various clinical trials for the use of MMP inhibitors. We will discuss the reasons behind the failures of most MMP inhibitors for the treatment of cancer and inflammatory diseases. There are still misconceptions about the pathophysiological roles of MMPs and the best strategies to inhibit their detrimental functions. This review aims to discuss MMPs in preclinical models and human pathologies. We will discuss new biochemical tools to track their proteolytic activity in vivo and ex vivo, in addition to future pharmacological alternatives to inhibit their detrimental functions in diseases. SIGNIFICANCE STATEMENT: Matrix metalloproteinases (MMPs) have been implicated in most inflammatory, autoimmune, cancers, and pathogen-mediated diseases. Initially overlooked, MMP contributions can be both beneficial and detrimental in disease progression and resolution. Thousands of MMP substrates have been suggested, and a few hundred have been validated. After more than 60 years of MMP research, there remain intriguing enigmas to solve regarding their biological functions in diseases.

Revisiting the interaction of heme with hemopexin

In hemolytic disorders, erythrocyte lysis results in massive release of hemoglobin and, subsequently, toxic heme. Hemopexin is the major protective factor against heme toxicity in human blood and currently considered for therapeutic use. It has been widely accepted that hemopexin binds heme with extraordinarily high affinity of <1 pM in a 1:1 ratio. However, several lines of evidence point to a higher stoichiometry and lower affinity than determined 50 years ago. Here, we re-analyzed these data. SPR and UV/Vis spectroscopy were used to monitor the interaction of heme with the human protein. The heme-binding sites of hemopexin were characterized using hemopexin-derived peptide models and competitive displacement assays. We obtained a K _D value of 0.32 ± 0.04 nM and the ratio for the interaction was determined to be 1:1 at low heme concentrations and at least 2:1 (heme:hemopexin) at high concentrations. We were able to identify two yet unknown potential heme-binding sites on hemopexin. Furthermore, molecular modelling with a newly created homology model of human hemopexin suggested a possible recruiting mechanism by which heme could consecutively bind several histidine residues on its way into the binding pocket. Our findings have direct implications for the potential administration of hemopexin in hemolytic disorders.

Structure of human Vitronectin C-terminal domain and interaction with Yersinia pestis outer membrane protein Ail

Vitronectin (Vn) is a major component of blood that controls many processes central to human biology. It is a drug target and a key factor in cell and tissue engineering applications, but despite long-standing efforts, little is known about the molecular basis for its functions. Here, we define the domain organization of Vn, report the crystal structure of its carboxyl-terminal domain, and show that it harbors the binding site for the Yersinia pestis outer membrane protein Ail, which recruits Vn to the bacterial cell surface to evade human host defenses. Vn forms a single four-bladed β/α-propeller that serves as a hub for multiple functions. The structure explains key features of native Vn and provides a blueprint for understanding and targeting this essential human protein.

WD40 Repeat Proteins: Signalling Scaffold with Diverse Functions

The WD40 domain is one of the most abundant and interacting domains in the eukaryotic genome. In proteins the WD domain folds into a β-propeller structure, providing a platform for the interaction and assembly of several proteins into a signalosome. WD40 repeats containing proteins, in lower eukaryotes, are mainly involved in growth, cell cycle, development and virulence, while in higher organisms, they play an important role in diverse cellular functions like signal transduction, cell cycle control, intracellular transport, chromatin remodelling, cytoskeletal organization, apoptosis, development, transcriptional regulation, immune responses. To play the regulatory role in various processes, they act as a scaffold for protein-protein or protein-DNA interaction. So far, no WD40 domain has been identified with intrinsic enzymatic activity. Several WD40 domain-containing proteins have been recently characterized in prokaryotes as well. The review summarizes the vast array of functions performed by different WD40 domain containing proteins, their domain organization and functional conservation during the course of evolution.

Structural and functional probing of PorZ, an essential bacterial surface component of the type-IX secretion system of human oral-microbiomic Porphyromonas gingivalis

Porphyromonas gingivalis is a member of the human oral microbiome abundant in dysbiosis and implicated in the pathogenesis of periodontal (gum) disease. It employs a newly described type-IX secretion system (T9SS) for secretion of virulence factors. Cargo proteins destined for secretion through T9SS carry a recognition signal in the conserved C-terminal domain (CTD), which is removed by sortase PorU during translocation. Here, we identified a novel component of T9SS, PorZ, which is essential for surface exposure of PorU and posttranslational modification of T9SS cargo proteins. These include maturation of enzyme precursors, CTD removal and attachment of anionic lipopolysaccharide for anchorage in the outer membrane. The crystal structure of PorZ revealed two β-propeller domains and a C-terminal β-sandwich domain, which conforms to the canonical CTD architecture. We further documented that PorZ is itself transported to the cell surface via T9SS as a full-length protein with its CTD intact, independently of the presence or activity of PorU. Taken together, our results shed light on the architecture and possible function of a novel component of the T9SS. Knowledge of how T9SS operates will contribute to our understanding of protein secretion as part of host-microbiome interactions by dysbiotic members of the human oral cavity.

A secreted tyrosine kinase acts in the extracellular environment

Although tyrosine phosphorylation of extracellular proteins has been reported to occur extensively in vivo, no secreted protein tyrosine kinase has been identified. As a result, investigation of the potential role of extracellular tyrosine phosphorylation in physiological and pathological tissue regulation has not been possible. Here, we show that VLK, a putative protein kinase previously shown to be essential in embryonic development, is a secreted protein kinase, with preference for tyrosine, that phosphorylates a broad range of secreted and ER-resident substrate proteins. We find that VLK is rapidly and quantitatively secreted from platelets in response to stimuli and can tyrosine phosphorylate coreleased proteins utilizing endogenous as well as exogenous ATP sources. We propose that discovery of VLK activity provides an explanation for the extensive and conserved pattern of extracellular tyrosine phosphophorylation seen in vivo, and extends the importance of regulated tyrosine phosphorylation into the extracellular environment.

Pathological conditions involving extracellular hemoglobin: molecular mechanisms, clinical significance, and novel therapeutic opportunities for α(1)-microglobulin

Hemoglobin (Hb) is the major oxygen (O(2))-carrying system of the blood but has many potentially dangerous side effects due to oxidation and reduction reactions of the heme-bound iron and O(2). Extracellular Hb, resulting from hemolysis or exogenous infusion, is shown to be an important pathogenic factor in a growing number of diseases. This review briefly outlines the oxidative/reductive toxic reactions of Hb and its metabolites. It also describes physiological protection mechanisms that have evolved against extracellular Hb, with a focus on the most recently discovered: the heme- and radical-binding protein α(1)-microglobulin (A1M). This protein is found in all vertebrates, including man, and operates by rapidly clearing cytosols and extravascular fluids of heme groups and free radicals released from Hb. Five groups of pathological conditions with high concentrations of extracellular Hb are described: hemolytic anemias and transfusion reactions, the pregnancy complication pre-eclampsia, cerebral intraventricular hemorrhage of premature infants, chronic inflammatory leg ulcers, and infusion of Hb-based O(2) carriers as blood substitutes. Finally, possible treatments of these conditions are discussed, giving a special attention to the described protective effects of A1M.

An alternative view of the proposed alternative activities of hemopexin

Hemopexin is a plasma protein that plays a well-established biological role in sequestering heme that is released into the plasma from hemoglobin and myoglobin as the result of intravascular or extravascular hemolysis as well as from skeletal muscle trauma or neuromuscular disease. In recent years, a variety of additional biological activities have been attributed to hemopexin, for example, hyaluronidase activity, serine protease activity, pro-inflammatory and anti-inflammatory activity as well as suppression of lymphocyte necrosis, inhibition of cellular adhesion, and binding of divalent metal ions. This review examines the challenges involved in the purification of hemopexin from plasma and in the recombinant expression of hemopexin and evaluates the questions that these challenges and the characteristics of hemopexin raise concerning the validity of many of the new activities proposed for this protein. As well, an homology model of the three-dimensional structure of human hemopexin is used to reveal that the protein lacks the catalytic triad that is characteristic of many serine proteases but that hemopexin possesses two highly exposed Arg-Gly-Glu sequences that may promote interaction with cell surfaces.

The structure of a haemopexin-fold protein from cow pea (Vigna unguiculata) suggests functional diversity of haemopexins in plants

The haemopexin fold is present in almost all life forms and is utilized for carrying out diverse physiological functions. The structure of CP4, a haemopexin-fold protein from cow pea (Vigna unguiculata), was determined at 2.1 Å resolution. The protein exists as a monomer both in solution and in the crystal. The structure revealed a typical four-bladed β-propeller topology. The protein exhibits 42% sequence similarity to LS-24 from Lathyrus sativus, with substantial differences in the surface-charge distribution and in the oligomeric state. A structure-based sequence analysis of haemopexin-fold proteins of plant and mammalian origin established a sequence signature associated with the haemopexin motif. This signature sequence enabled the identification of other proteins with possible haemopexin-like topology of both plant and animal origin. Although CP4 shares a structural fold with LS-24 and other haemopexins, biochemical studies indicated possible functional differences between CP4 and LS-24. While both of these proteins exhibit spermine-binding potential, CP4 does not bind to haem, unlike LS-24.

Metal ions and electrolytes regulate the dissociation of heme from human hemopexin at physiological pH

The stability of the hemopexin-heme (Hx-heme) complex to dissociation of the heme prosthetic group has been examined in bicarbonate buffers in the presence and absence of various divalent metal ions. In NH(4)HCO(3) buffer (pH 7.4, 20 mm, 25 degrees C) containing Zn(2+) (100 microm), 14% of the heme dissociates from this complex (4.5 microm) within 10 min, and 50% dissociates within 2 h. In the absence of metal ions, the rate of dissociation of this complex is far lower, is decreased further in KHCO(3) solution, and is minimal in NaHCO(3). In NH(4)HCO(3) buffer, dissociation of the Hx-heme complex is accelerated by addition of divalent metals with decreasing efficiency in the order Zn(2+) > Cu(2+) >> Ni(2+) > Co(2+)>>Mn(2+). Addition of Ca(2+) prior to addition of Zn(2+) stabilizes the Hx-heme complex to dissociation of the heme group, and addition of Ca(2+) after Zn(2+)-induced dissociation of the Hx-heme complex results in re-formation of the Hx-heme complex. These effects are greatly accelerated at 37 degrees C and diminished in other buffers. Overall, the solution conditions that promote formation of the Hx-heme complex are similar to those found in blood plasma, and conditions that promote release of heme are similar to those that the Hx-heme complex should encounter in endosomes following endocytosis of the complex formed with its hepatic receptor.

An investigation of hemopexin redox properties by spectroelectrochemistry: biological relevance for heme uptake

Hemopexin (HPX) has two principal roles: it sequesters free heme in vivo for the purpose of preventing the toxic effects of this moiety, which is largely due to heme's ability to catalyze free radical formation, and it transports heme intracellularly thus limiting its availability as an iron source for pathogens. Spectroelectrochemistry was used to determine the redox potential for heme and meso-heme (mH) when bound by HPX. At pH 7.2, the heme-HPX assembly exhibits E (1/2) values in the range 45-90 mV and the mH-HPX assembly in the range 5-55 mV, depending on environmental electrolyte identity. The E (1/2) value exhibits a 100 mV positive shift with a change in pH from 7.2 to 5.5 for mH-HPX, suggesting a single proton dependent equilibrium. The E (1/2) values for heme-HPX are more positive in the presence of NaCl than KCl indicating that Na(+), as well as low pH (5.5) stabilizes ferro-heme-HPX. Furthermore, comparing KCl with K(2)HPO(4), the chloride salt containing system has a lower potential, indicating that heme-HPX is easier to oxidize. These physical properties related to ferri-/ferro-heme reduction are both structurally and biologically relevant for heme release from HPX for transport and regulation of heme oxygenase expression. Consistent with this, when the acidification of endosomes is prevented by bafilomycin then heme oxygenase-1 induction by heme-HPX no longer occurs.

Cell surface proteins in archaeal and bacterial genomes comprising "LVIVD", "RIVW" and "LGxL" tandem sequence repeats are predicted to fold as beta-propeller

Proteins that share even low sequence homologies are known to adopt similar folds. The beta-propeller structural motif is one such example. Identifying sequences that adopt a beta-propeller fold is useful to annotate protein structure and function. Often, tandem sequence repeats provide the necessary signal for identifying beta-propellers in proteins. In our recent analysis to identify cell surface proteins in archaeal and bacterial genomes, we identified some proteins that contain novel tandem repeats "LVIVD", "RIVW" and "LGxL". In this work, based on protein fold predictions and three-dimensional comparative modeling methods, we predicted that these repeat types fold as beta-propeller. Further, the evolutionary trace analysis of all proteins constituting amino acid sequence repeats in beta-propellers suggest that the novel repeats have diverged from a common ancestor.

The automatic detection of known beta-propeller structural motifs from protein tertiary structure

Following our previous work on the analysis of 'structural plasticity' associated with the beta-propeller structural motifs, we have now developed a simple method that can automatically detect all the known beta-propellers in protein tertiary structure, given a list of Protein Data Bank (PDB) codes as input to the computer program. Our beta-propeller detection (BPD) method identifies the location of beta-propellers in the protein structure, specifies the beta-propeller type, the beta-sheet associated beta-strand pattern and the structurally similar beta-propellers observed in other proteins. When tested on 21,566 proteins in the PDB, the BPD method was capable of correctly identifying all the known 245 beta-propellers described in the structural classification of proteins (SCOP) with the number of false positives detected being less than 0.2%. Forty-one false positives were detected that correspond to eight known protein families. When compared with some of the popular web-based programs that can automatically detect 'structural similarities' between the query and target proteins, our method has the advantage of also being capable of detecting beta-propellers associated with 'structural plasticity' and in situations where the target and query proteins differ in amino acid sequence length.

Crystal structures of MMPs in complex with physiological and pharmacological inhibitors

Matrix Metalloproteinases (MMPs) are a family of multidomain zinc endopeptidases that function in the extracellular space or attached to the cell membrane. Their proteolytic activity is controlled by the presence of endogenous inhibitors, the tissue inhibitors of matrix metalloproteinases (TIMPs), alpha-macroglobulin and others. Disruption of the proteinase-inhibitor balance is observed in serious diseases such as arthritis, tumor growth and metastasis, rendering the MMPs attractive targets for drug intervention by pharmacological inhibitors. The determination of MMP structures is of critical importance in order to understand their substrate preferences, dimerization events, and their association with matrix components and inhibitors. Thus, MMP structures may contribute significantly to the development of specific MMP inhibitors, which should allow precise control of individual members of the MMP family without affecting all members or the closely related metalloproteinases such as ADAMs and ADAMTSs.

Increasing stability of water-soluble PQQ glucose dehydrogenase by increasing hydrophobic interaction at dimeric interface

Background

Water-soluble quinoprotein glucose dehydrogenase (PQQGDH-B) from Acinetobacter calcoaceticus has a great potential for application as a glucose sensor constituent. Because this enzyme shows no activity in its monomeric form, correct quaternary structure is essential for the formation of active enzyme. We have previously reported on the increasing of the stability of PQQGDH-B by preventing the subunit dissociation. Previous studies were based on decreasing the entropy of quaternary structure dissociation but not on increasing the interaction between the two subunits. We therefore attempted to introduce a hydrophobic interaction in the dimeric interface to increase the stability of PQQGDH-B.

Results

Amino acid residues Asn340 and Tyr418 face each other at the dimer interface of PQQGDH-B, however no interaction exists between their side chains. We simultaneously substituted Asn340 to Phe and Tyr418 to Phe or Ile, to create the two mutants Asn340Phe/Tyr418Phe and Asn340Phe/Tyr418Ile. Furthermore, residues Leu280, Val282 and Val342 form a hydrophobic region that faces, on the other subunit, residues Thr416 and Thr417, again without any specific interaction. We simultaneously substituted Thr416 and Thr417 to Val, to create the mutant Thr416Val/Thr417Val. The temperatures resulting in lose of half of the initial activity of the constructed mutants were increased by 3–4°C higher over wild type. All mutants showed 2-fold higher thermal stability at 55°C than the wild-type enzyme, without decreasing their catalytic activities. From the 3D models of all the mutant enzymes, the predicted binding energies were found to be significantly greater that in the wild-type enzyme, consistent with the increases in thermal stabilities.

Conclusions

We have achieved via site-directed mutagenesis the improvement of the thermal stability of PQQGDH-B by increasing the dimer interface interaction. Through rational design based on the quaternary structure of the enzyme, we selected residues located at the dimer interface that do not contribute to the intersubunit interaction. By substituting these residues to hydrophobic ones, the thermal stability of PQQGDH-B was increased without decreasing its catalytic activity.

Determination of enzyme mechanisms by molecular dynamics: studies on quinoproteins, methanol dehydrogenase, and soluble glucose dehydrogenase

Molecular dynamics (MD) simulations have been carried out to study the enzymatic mechanisms of quinoproteins, methanol dehydrogenase (MDH), and soluble glucose dehydrogenase (sGDH). The mechanisms of reduction of the orthoquinone cofactor (PQQ) of MDH and sGDH involve concerted base-catalyzed proton abstraction from the hydroxyl moiety of methanol or from the 1-hydroxyl of glucose, and hydride equivalent transfer from the substrate to the quinone carbonyl carbon C5 of PQQ. The products of methanol and glucose oxidation are formaldehyde and glucolactone, respectively. The immediate product of PQQ reduction, PQQH- [-HC5(O-)-C4(=O)-] and PQQH [-HC5(OH)-C4(=O)-] converts to the hydroquinone PQQH2 [-C5(OH)=C4(OH)-]. The main focus is on MD structures of MDH * PQQ * methanol, MDH * PQQH-, MDH * PQQH, sGDH * PQQ * glucose, sGDH * PQQH- (glucolactone, and sGDH * PQQH. The reaction PQQ-->PQQH- occurs with Glu 171-CO2- and His 144-Im as the base species in MDH and sGDH, respectively. The general-base-catalyzed hydroxyl proton abstraction from substrate concerted with hydride transfer to the C5 of PQQ is assisted by hydrogen-bonding to the C5=O by Wat1 and Arg 324 in MDH and by Wat89 and Arg 228 in sGDH. Asp 297-COOH would act as a proton donor for the reaction PQQH(-)-->PQQH, if formed by transfer of the proton from Glu 171-COOH to Asp 297-CO2- in MDH. For PQQH-->PQQH2, migration of H5 to the C4 oxygen may be assisted by a weak base like water (either by crystal water Wat97 or bulk solvent, hydrogen-bonded to Glu 171-CO2- in MDH and by Wat89 in sGDH).

Structural plasticity associated with the beta-propeller architecture

The beta-propeller architecture observed in protein tertiary structure and classified into the five different types according to number of 'blades' (or beta-sheets) and a sixth type classified according to the secondary structure composition of the blades (the beta beta alpha beta-molecular unit) is characterized by variations (or plasticity) in the structure. These correspond to the number of beta-strands associated with the blade, the number of amino acid residues associated with equivalent beta-strands in the different blades and the presence of alpha-helices and twisted beta-strands. We have generated a beta-sheet associated beta-strand pattern that may be important for protein structure prediction and modeling. Analysis of the beta-propellers extracted primarily from the SCOP database revealed there are 179 beta-propellers. The examination of the secondary structure corresponding to the beta-propeller using PDBsum that was useful to define the beta-sheet associated beta-strand pattern, combined with visualization on graphics display revealed structural plasticity associated with the beta-propeller architecture. Particularly, the type 6- and 7-bladed beta-propellers known to be associated with sequence and functional diversity are more common and associated with relatively more structural variations compared to the other beta-propeller types.

Analysis of void volumes in proteins and application to stability of the p53 tumour suppressor protein

We have developed a new method for the analysis of voids in proteins (defined as empty cavities not accessible to solvent). This method combines analysis of individual discrete voids with analysis of packing quality. While these are different aspects of the same effect, they have traditionally been analysed using different approaches. The method has been applied to the calculation of total void volume and maximum void size in a non-redundant set of protein domains and has been used to examine correlations between thermal stability and void size. The tumour-suppressor protein p53 has then been compared with the non-redundant data set to determine whether its low thermal stability results from poor packing. We found that p53 has average packing, but the detrimental effects of some previously unexplained mutations to p53 observed in cancer can be explained by the creation of unusually large voids.

IC138 is a WD-repeat dynein intermediate chain required for light chain assembly and regulation of flagellar bending

Increased phosphorylation of dynein IC IC138 correlates with decreases in flagellar microtubule sliding and phototaxis defects. To test the hypothesis that regulation of IC138 phosphorylation controls flagellar bending, we cloned the IC138 gene. IC138 encodes a novel protein with a calculated mass of 111 kDa and is predicted to form seven WD-repeats at the C terminus. IC138 maps near the BOP5 locus, and bop5-1 contains a point mutation resulting in a truncated IC138 lacking the C terminus, including the seventh WD-repeat. bop5-1 cells display wild-type flagellar beat frequency but swim slower than wild-type cells, suggesting that bop5-1 is altered in its ability to control flagellar waveform. Swimming speed is rescued in bop5-1 transformants containing the wild-type IC138, confirming that BOP5 encodes IC138. With the exception of the roadblock-related light chain, LC7b, all the other known components of the I1 complex, including the truncated IC138, are assembled in bop5-1 axonemes. Thus, the bop5-1 motility phenotype reveals a role for IC138 and LC7b in the control of flagellar bending. IC138 is hyperphosphorylated in paralyzed flagellar mutants lacking radial spoke and central pair components, further indicating a role for the radial spokes and central pair apparatus in control of IC138 phosphorylation and regulation of flagellar waveform.

Concerted Structural Changes in the Peptidase and the Propeller Domains of Prolyl Oligopeptidase are Required for Substrate Binding

Prolyl oligopeptidase contains a peptidase domain and its catalytic triad is covered by the central tunnel of a seven-bladed beta-propeller. This domain makes the enzyme an oligopeptidase by excluding large structured peptides from the active site. The apparently rigid crystal structure does not explain how the substrate can approach the catalytic groups. Two possibilities of substrate access were investigated: either blades 1 and 7 of the propeller domain move apart, or the peptidase and/or propeller domains move to create an entry site at the domain interface. Engineering disulfide bridges to the expected oscillating structures prevented such movements, which destroyed the catalytic activity and precluded substrate binding. This indicated that concerted movements of the propeller and the peptidase domains are essential for the enzyme action.

The structure of Ski8p, a protein regulating mRNA degradation: Implications for WD protein structure

Ski8p is a 44-kD protein that primarily functions in the regulation of exosome-mediated, 3'--> 5' degradation of damaged mRNA. It does so by forming a complex with two partner proteins, Ski2p and Ski3p, which complete a complex that is capable of recruiting and activating the exosome/Ski7p complex that functions in RNA degradation. Ski8p also functions in meiotic recombination in complex with Spo11 in yeast. It is one of the many hundreds of primarily eukaryotic proteins containing tandem copies of WD repeats (also known as WD40 or beta-transducin repeats), which are short ~40 amino acid motifs, often terminating in a Trp-Asp dipeptide. Genomic analyses have demonstrated that WD repeats are found in 1%-2% of proteins in a typical eukaryote, but are extremely rare in prokaryotes. Almost all structurally characterized WD-repeat proteins are composed of seven such repeats and fold into seven-bladed beta propellers. Ski8p was thought to contain five WD repeats on the basis of primary sequence analysis implying a five-bladed propeller. The 1.9 A crystal structure unexpectedly exhibits a seven-bladed propeller fold with seven structurally authentic WD repeats. Structure-based sequence alignments show additional sequence diversity in the two undetected repeats. This demonstrates that many WD repeats have not yet been identified in sequences and also raises the possibility that the seven-bladed propeller may be the predominant fold for this family of proteins.

Molecular phylogeny of the kelch-repeat superfamily reveals an expansion of BTB/kelch proteins in animals

Background

The kelch motif is an ancient and evolutionarily-widespread sequence motif of 44–56 amino acids in length. It occurs as five to seven repeats that form a β-propeller tertiary structure. Over 28 kelch-repeat proteins have been sequenced and functionally characterised from diverse organisms spanning from viruses, plants and fungi to mammals and it is evident from expressed sequence tag, domain and genome databases that many additional hypothetical proteins contain kelch-repeats. In general, kelch-repeat β-propellers are involved in protein-protein interactions, however the modest sequence identity between kelch motifs, the diversity of domain architectures, and the partial information on this protein family in any single species, all present difficulties to developing a coherent view of the kelch-repeat domain and the kelch-repeat protein superfamily. To understand the complexity of this superfamily of proteins, we have analysed by bioinformatics the complement of kelch-repeat proteins encoded in the human genome and have made comparisons to the kelch-repeat proteins encoded in other sequenced genomes.

Results

We identified 71 kelch-repeat proteins encoded in the human genome, whereas 5 or 8 members were identified in yeasts and around 18 in C. elegans, D. melanogaster and A. gambiae. Multiple domain architectures were identified in each organism, including previously unrecognised forms. The vast majority of kelch-repeat domains are predicted to form six-bladed β-propellers. The most prevalent domain architecture in the metazoan animal genomes studied was the BTB/kelch domain organisation and we uncovered 3 subgroups of human BTB/kelch proteins. Sequence analysis of the kelch-repeat domains of the most robustly-related subgroups identified differences in β-propeller organisation that could provide direction for experimental study of protein-binding characteristics.

Conclusion

The kelch-repeat superfamily constitutes a distinct and evolutionarily-widespread family of β-propeller domain-containing proteins. Expansion of the family during the evolution of multicellular animals is mainly accounted for by a major expansion of the BTB/kelch domain architecture. BTB/kelch proteins constitute 72 % of the kelch-repeat superfamily of H. sapiens and form three subgroups, one of which appears the most-conserved during evolution. Distinctions in propeller blade organisation between subgroups 1 and 2 were identified that could provide new direction for biochemical and functional studies of novel kelch-repeat proteins.

A kelch beta propeller featuring as a G beta structural mimic: reinventing the wheel?

New genetic and protein interaction data suggest that G protein alpha subunits may have partners with primary sequences that are quite divergent. How this is achieved may be through the adoption of similar structures, the beta propeller, by both proteins containing WD-40 repeats and kelch domains. Gettemans et al. describe results in yeast that suggest that kelch-domain proteins may serve as previously unrecognized beta subunits in the heterotrimeric G protein complex.

Dealing with iron: common structural principles in proteins that transport iron and heme

Iron is essential to life, but poses severe problems because of its toxicity and the insolubility of hydrated ferric ions at neutral pH. In animals, a family of proteins called transferrins are responsible for the sequestration, transport, and distribution of free iron. Comparison of the structure and function of transferrins with a completely unrelated protein hemopexin, which carries out the same function for heme, identifies molecular features that contribute to a successful protein system for iron acquisition, transport, and release. These include a two-domain protein structure with flexible hinges that allow these domains to enclose the bound ligand and provide suitable chemistry for stable binding and an appropriate trigger for release.

Short inverse complementary amino acid sequences generate protein complexity

Inversions of short genomic sequences play a central role in the generation of protein complexity. More than half of the 1300 motifs registered in ProSite have protein inverse complementary sequences (princoms) among proteins registered in SwissProt. The observed number of princoms occurrences exceeds by far the expected number (p < 10(-10)). Princoms often endow their host proteins with a whole new range of biochemical and physiological capabilities, including the possibility of intramolecular and intermolecular disulfide bond formation. These results support the idea that, like the duplications, the inversions of small genomic fragments have been a fundamental mechanism for shaping genomes.

Inhibition of Mg2+-dependent Adhesion of Polymorphonuclear Leukocytes by Serum Hemopexin: Differences in Divalent-Cation Dependency of Cell Adhesion in the Presence and Absence of Serum

Circulating and nonadherent polymorphonuclear leukocytes (PMNs) become activated to attain adhesive state in an integrin-dependent manner by various stimuli, and perform a variety of microbicidal functions such as phagocytosis and superoxide production. We found that, in the absence of serum, a physiological concentration of hemopexin has a strong inhibitory action on Mg(2+)-dependent adhesion of PMA-activated PMNs to fibrinogen- and serum-coated surfaces. Under these conditions, Ca(2+) had no effect on Mg(2+)-dependent adhesion or the adhesion-inhibitory activity of hemopexin. In contrast, PMNs suspended in serum containing sufficient amounts of hemopexin to inhibit adhesion showed marked adherence, which was inhibited by EGTA. Next, we prepared a small-molecule fraction of serum by ultrafiltration followed by boiling. PMA-activated PMNs was found to adhere in the presence of both hemopexin and the small-molecule fraction, and the adhesion was enhanced by exogenous Ca(2+). EGTA abolished the effect of the small molecule fraction. The data suggest that serum contains adhesion-promoting factor(s) which allows PMNs to adhere despite the presence of hemopexin and that Ca(2+) is required for adhesion-promoting activity. Further study of hemopexin may provide clues for new therapeutic strategies aimed at interfering with PMN adhesion to control inflammation and tissue injury.

Navigation inside a protease: substrate selection and product exit in the tricorn protease from Thermoplasma acidophilum

The proposed pathway and mechanism of substrate entry and product egress in the hexameric D3 symmetric tricorn protease from Thermoplasma acidophilum were explored by crystallographic studies of ligand complexes and by structure-based mutagenesis. Obstruction of the pore within the 7-bladed beta-propeller (beta7) domain by alkylation or oxidation of an engineered double cysteine mutant strongly decreased enzymatic activities. In line herewith, the crystal structure of the tricorn protease in complex with a trideca-peptide inhibitor modifying the catalytic Ser965 revealed part of the peptide trapped inside the channel of the beta7 domain. The cysteine mutation widening the lumen of the 6-bladed beta-propeller (beta6) domain enhanced catalytic activity, which was restored to normal values after its alkylation. A charge reversal mutant at the putative anchor site of the substrate C terminus, R131E-R132E, drastically reduced the proteolytic activity. The complex crystal structure of a peptide inhibitor with a diketo group at the cleavage site mapped the substrate recognition site and confirmed the role of Arg131-Arg132 as an anchor site. Our results strongly suggest the wider beta7 domain to serve as a selective filter and guide of the substrate to the sequestered active site, while the narrower beta6 domain routes the product to the surface. Moreover, we identified the role of Arg131-Arg132 in anchoring the substrate C terminus.

Structural basis of the adaptive molecular recognition by MMP9

Matrix metalloproteinase (MMPs) are critical for the degradation of extracellular matrix components and, therefore, need to be regulated tightly. Almost all MMPs share a homologous C-terminal haemopexin-like domain (PEX). Besides its role in macromolecular substrate processing, the PEX domains appear to play a major role in regulating MMP activation, localisation and inhibition. One intriguing property of MMP9 is its competence to bind different proteins, involved in these regulatory processes, with high affinity at an overlapping recognition site on its PEX domain. With the crystal structure of the PEX9 dimer, we present the first example of how PEX domains accomplish these diverse roles. Blade IV of PEX9 mediates the non-covalent and predominantly hydrophobic dimerisation contact. Large shifts of blade III and, in particular, blade IV, accompany the dimerisation, resulting in a remarkably asymmetric homodimeric structure. The asymmetry provides a novel mechanism of adaptive protein recognition, where different proteins (PEX9, PEX1, and TIMP1) can bind with high affinity to PEX9 at an overlapping site. Finally, the structure illustrates how the dimerisation generates new properties on both a physico-chemical and functional level.

Hemopexin: structure, function, and regulation

Hemopexin (HPX) is the plasma protein with the highest binding affinity to heme among known proteins. It is mainly expressed in liver, and belongs to acute phase reactants, the synthesis of which is induced after inflammation. Heme is potentially highly toxic because of its ability to intercalate into lipid membrane and to produce hydroxyl radicals. The binding strength between heme and HPX, and the presence of a specific heme-HPX receptor able to catabolize the complex and to induce intracellular antioxidant activities, suggest that hemopexin is the major vehicle for the transportation of heme in the plasma, thus preventing heme-mediated oxidative stress and heme-bound iron loss. In this review, we discuss the experimental data that support this view and show that the most important physiological role of HPX is to act as an antioxidant after blood heme overload, rather than to participate in iron metabolism. Particular attention is also put on the structure of the protein and on its regulation during the acute phase reaction.

Wavelet transforms for the characterization and detection of repeating motifs

The role of repeating motifs in protein structures is thought to be as modular building blocks which allow an economic way of constructing complex proteins. In this work novel wavelet transform analysis techniques are used to detect and characterize repeating motifs in protein sequence and structure data, where the Kyte-Doolittle hydrophobicity scale (Eta Phi) and relative accessible surface area (rASA) data provide residue information about the protein sequence and structure, respectively. We analyze a variety of repeating protein motifs, TIM barrels, propellor blades, coiled coils and leucine-rich repeat structures. Detection and characterization of these motifs is performed using techniques based on the continuous wavelet transform (CWT). Results indicate that the wavelet transform techniques developed herein are a promising approach for the detection and characterization of repeating motifs for both structural and in some instances sequence data.

Enzyme mechanism and catalytic property of beta propeller phytase

BACKGROUND

Phytases hydrolyze phytic acid (myo-inositol-hexakisphosphate) to less-phosphorylated myo-inositol derivatives and inorganic phosphate. Phytases are used in animal feed to reduce phosphate pollution in the environment. Recently, a thermostable, calcium-dependent Bacillus phytase was identified that represents the first example of the beta propeller fold exhibiting phosphatase activity. We sought to delineate the catalytic mechanism and property of this enzyme.

RESULTS

The crystal structure of the enzyme in complex with inorganic phosphate reveals that two phosphates and four calcium ions are tightly bound at the active site. Mutation of the residues involved in the calcium chelation results in severe defects in the enzyme's activity. One phosphate ion, chelating all of the four calcium ions, is close to a water molecule bridging two of the bound calcium ions. Fluoride ion, which is expected to replace this water molecule, is an uncompetitive inhibitor of the enzyme. The enzyme is able to hydrolyze any of the six phosphate groups of phytate.

CONCLUSIONS

The enzyme reaction is likely to proceed through a direct attack of the metal-bridging water molecule on the phosphorous atom of a substrate and the subsequent stabilization of the pentavalent transition state by the bound calcium ions. The enzyme has two phosphate binding sites, the "cleavage site", which is responsible for the hydrolysis of a substrate, and the "affinity site", which increases the binding affinity for substrates containing adjacent phosphate groups. The existence of the two nonequivalent phosphate binding sites explains the puzzling formation of the alternately dephosphorylated myo-inositol triphosphates from phytate and the hydrolysis of myo-inositol monophosphates.

Protein folds propelled by diversity

Many proteins involved in key biological processes are modular in nature. A group of these, the beta-propeller proteins, fold by packing 4-stranded beta-sheets in a circular array. The members of this group are increasingly numerous and, although their modular building blocks all preserve the same basic conformation, they do not have similar sequences. These proteins have extreme functional and phylogenetic diversity. Here, features of the beta-propeller fold are reviewed through comparisons of available structural coordinates. Structure-based sequence alignments combined with analyses of superpositions of individual modular units reveal conserved general features such as hydrogen bonds, beta-turns and positions of hydrophobic contacts. The lack of significant sequence identity is compensated by sets of interactions which stabilise the fold differently in distinct structures. Re-occurring aspartates make contacts to exposed backbone amides in turns or peptide connections within the same sheet. The sole factor responsible for the number of sheets that assemble in the array is the size of the hydrophobic residues that pack into the cores between the sheets. Whilst there is no overall sequence conservation, it may be possible to detect new members of this fold through sequence searches that take into account the repeated nature of the modular assembly as well as the positions of hydrophobic residues and H-bonding side chains.

A noncanonical WD-repeat protein from the cyanobacterium Synechocystis PCC6803: structural and functional study

SYNECHOCYSTIS: PCC6803 possesses several open reading frames encoding putative WD-repeat proteins. One, the Hat protein, is involved in the control of a high-affinity transport system for inorganic carbon that is active when the cells are grown under a limiting concentration of this carbon substrate. The protein is composed of two major domains separated by a hydrophobic linker region of 20 amino acid residues. The N-terminal domain of Hat has no homolog in standard databases and does not display any particular structural features. Eleven WD repeats have been identified in the C-terminal moiety. The region encompassing the four terminal WD repeats is essential for growth under a limiting inorganic carbon regime. The region encompassing the two most terminal WD repeats is required for the activity of the high-affinity transport system. However, because the Hat protein is located in the thylakoids, it should not be itself an element of the transport system. The structural organization of the WD-containing domain of Hat was modeled from the crystal structure of the G protein beta subunit (with seven WD repeats) and of hemopexin (a structural analog with four blades). Functional and structural data argue in favor of an organization of the Hat WD moiety in two subdomains of seven and four WD repeats. The C-terminal 4-mer subdomain might interact with another, yet unknown, protein/peptide. This interaction could be essential in modulating the stability of the 4-mer structure and, thus, the accessibility of this subdomain, or at least of the region encompassing the last two WD repeats.

Effects of reduction and ligation of heme iron on the thermal stability of heme-hemopexin complexes

Hemopexin has two homologous domains (N- and C-terminal domains), binds 1 mole of heme per mole with high affinity (Kd < 1 pM) in a low-spin bis-histidyl complex, and acts as a transporter for the heme. Transport is accomplished via endocytosis without degradation of the protein. Factors that affect stability of the heme coordination complex and potentially heme release in vivo were examined. The effects of temperature on hemopexin, its N-terminal domain, and their respective ferri-, ferro-, and CO-ferro-heme complexes were studied using absorbance and circular dichroism (CD) spectroscopy. As monitored with second-derivative absorbance spectra, the higher order structure of apo-hemopexin unfolds with a Tm of 52 degrees C in 50 mM sodium phosphate buffer and is stabilized by 150 mM NaCl (Tm 63 degrees C). Bis-histidyl heme coordination by hemopexin, observed by Soret absorbance, is substantially weakened by reduction of ferri-heme-hemopexin (Tm 55.5 degrees C) to the ferro-heme form (Tm 48 degrees C), and NaCl stabilizes both complexes by 10-15 degrees C. CO binding to ferroheme-hemopexin restores complex stability (Tm 67 degrees C). Upon cooling, unfolded apo- and ferriheme-hemopexin extensively refold and recover substantial heme-binding activity, but the characteristic ellipticity of the native protein (UV region) and heme complex (Soret region) are not regained, indicating that altered refolded forms are produced. Lowering the pH from 7.4 to 6.5 has little effect on the stability of the apo-protein but increases the Tm of heme complexes by 5-12 degrees C. The stability of the apo-N-terminal domain (Tm 53 degrees C) is similar to that of intact hemopexin, and the ferri-, ferro-, and CO-ferro-heme complexes of the N-terminal domain have Tm values of 53 degrees C, 33 degrees C, and 75 degrees C, respectively.

Heme binding by hemopexin: evidence for multiple modes of binding and functional implications

Hemopexin binds 1 mol of heme per mol with high affinity (Kd < 1 pM) in a low-spin complex and acts as a transport vehicle for the heme. Circular dichroism (CD) spectroscopy was used to examine the heme environment in the ferri-, ferro-, and CO-ferro complexes of four iron tetrapyrroles [meso-, proto-, deutero-, and (2-vinyl, 4-hydroxymethyl)-deutero-heme] with three species (human, rabbit, and rat) of hemopexin. All ferri-heme-hemopexin complexes exhibit a band of positive ellipticity near the Soret maximum, except for the human ferri-protoheme hemopexin complex, which has a bisignate spectrum. The ferro-heme and CO-ferro-heme complexes display a variety of spectra, demonstrating redox- and ligand-linked shifts in conformation that alter the environment of the heme. The rabbit mesoheme-N-domain complexes have absorbance spectra almost indistinguishable from those of intact hemopexin, but present CD spectra that are distinctly different. However, adding the C-domain to mesoheme-N-domain restores most of the CD characteristics of the intact hemopexin complexes.

Beta propellers: structural rigidity and functional diversity

Recently solved structures and proposed models have helped to reveal the structural characteristics of the beta-propeller fold, as well as the features that contribute to its high rigidity and stability. Possible strategies for identifying beta-propeller proteins in newly characterised sequences are helping to overcome the problems of predicting the beta-propeller fold from amino acid sequences.

The effects of heme-binding proteins on the peroxidative and catalatic activities of hemin

The plasma proteins hemopexin (Hx) and albumin (Alb) are known to bind heme with high and medium affinity, respectively. To study how this binding modifies heme catalytic reactivity, the effects of Hx, human serum Alb (HSA), and bovine serum Alb (BSA) on the peroxidase- and catalaselike activities of hemin were investigated. These hemin activities were found to be inhibited by 50 to 60% with either HSA or BSA, and by 80 to 90% with Hx. The heme complexes with Hx or Alb (1:1 = protein:heme) therefore had a much lower reactivity toward H2O2 and Cum-OOH than the nonprotein heme. A kinetic analysis suggested that binding to Hx or Alb inhibited the primary activation of heme by H2O2, the step common for both peroxidase- and catalaselike activities of hemin. It is thought that by complexing heme, the Hx and Alb can prevent the toxic effects of extracellular heme in blood plasma.

The 1.7 A crystal structure of the apo form of the soluble quinoprotein glucose dehydrogenase from Acinetobacter calcoaceticus reveals a novel internal conserved sequence repeat

The crystal structure of a dimeric apo form of the soluble quinoprotein glucose dehydrogenase (s-GDH) from Acinetobacter calcoaceticus has been solved by multiple isomorphous replacement followed by density modification, and was subsequently refined at 1. 72 A resolution to a final crystallographic R-factor of 16.5% and free R-factor of 20.8% [corrected]. The s-GDH monomer has a beta-propeller fold consisting of six four-stranded anti-parallel beta-sheets aligned around a pseudo 6-fold symmetry axis. The enzyme binds three calcium ions per monomer, two of which are located in the dimer interface. The third is bound in the putative active site, where it may bind and functionalize the pyrroloquinoline quinone (PQQ) cofactor. A data base search unexpectedly showed that four uncharacterized protein sequences are homologous to s-GDH with many residues in the putative active site absolutely conserved. This indicates that these homologs may have a similar structure and that they may catalyze similar PQQ-dependent reactions.A structure-based sequence alignment of the six four-stranded beta-sheets in s-GDH's beta-propeller fold shows an internally conserved sequence repeat that gives rise to two distinct conserved structural motifs. The first structural motif is found at the corner of the short beta-turn between the inner two beta-strands of the beta-sheets, where an Asp side-chain points back into the beta-sheet to form a hydrogen-bond with the OH/NH of a Tyr/Trp side-chain in the same beta-sheet. The second motif involves an Arg/Lys side-chain in the C beta-strand of one beta-sheet, which forms a bidentate salt-bridge with an Asp/Glu in the CD loop of the next beta-sheet. These intra and inter-beta-sheet hydrogen-bonds are likely to contribute to the stability of the s-GDH beta-propeller fold.

Tachylectin-2: crystal structure of a specific GlcNAc/GalNAc-binding lectin involved in the innate immunity host defense of the Japanese horseshoe crab Tachypleus tridentatus

Tachylectin-2, isolated from large granules of the hemocytes of the Japanese horseshoe crab (Tachypleus tridentatus), is a 236 amino acid protein belonging to the lectins. It binds specifically to N-acetylglucosamine and N-acetylgalactosamine and is a part of the innate immunity host defense system of the horseshoe crab. The X-ray structure of tachylectin-2 was solved at 2.0 A resolution by the multiple isomorphous replacement method and this molecular model was employed to solve the X-ray structure of the complex with N-acetylglucosamine. Tachylectin-2 is the first protein displaying a five-bladed beta-propeller structure. Five four-stranded antiparallel beta-sheets of W-like topology are arranged around a central water-filled tunnel, with the water molecules arranged as a pentagonal dodecahedron. Tachylectin-2 exhibits five virtually identical binding sites, one in each beta-sheet. The binding sites are located between adjacent beta-sheets and are made by a large loop between the outermost strands of the beta-sheets and the connecting segment from the previous beta-sheet. The high number of five binding sites within the single polypeptide chain strongly suggests the recognition of carbohydrate surface structures of pathogens with a fairly high ligand density. Thus, tachylectin-2 employs strict specificity for certain N-acetyl sugars as well as the surface ligand density for self/non-self recognition.

The WD repeat: a common architecture for diverse functions

Our knowledge of the large family of proteins that contain the WD repeat continues to accumulate. The WD-repeat proteins are found in all eukaryotes and are implicated in a wide variety of crucial functions. The solution of the three-dimensional structure of one WD-repeat protein and the assumption that the structure will be common to all members of this family has allowed subfamilies of WD-repeat proteins to be defined on the basis of probable surface similarity. Proteins that have very similar surfaces are likely to have common binding partners and similar functions.

Orientation of heparin-binding sites in native vitronectin. Analyses of ligand binding to the primary glycosaminoglycan-binding site indicate that putative secondary sites are not functional

A primary heparin-binding site in vitronectin has been localized to a cluster of cationic residues near the C terminus of the protein. More recently, secondary binding sites have been proposed. In order to investigate whether the binding site originally identified on vitronectin functions as an exclusive and independent heparin-binding domain, solution binding methods have been used in combination with NMR and recombinant approaches to evaluate ligand binding to the primary site. Evaluation of the ionic strength dependence of heparin binding to vitronectin according to classical linkage theory indicates that a single ionic bond is prominent. It had been previously shown that chemical modification of vitronectin using an arginine-reactive probe results in a significant reduction in heparin binding (Gibson, A., Baburaj, K., Day, D. E., Verhamme, I. , Shore, J. D., and Peterson, C. B. (1997) J. Biol. Chem. 272, 5112-5121). The label has now been localized to arginine residues within the cyanogen bromide fragment-(341-380) that contains the primary heparin-binding site on vitronectin. One- and two-dimensional NMR on model peptides based on this primary heparin-binding site indicate that an arginine residue participates in the ionic interaction and that other nonionic interactions may be involved in forming a complex with heparin. A recombinant polypeptide corresponding to the C-terminal 129 amino acids of vitronectin exhibits heparin-binding affinity that is comparable to that of full-length vitronectin and is equally effective at neutralizing heparin anticoagulant activity. Results from this broad experimental approach argue that the behavior of the primary site is sufficient to account for the heparin binding activity of vitronectin and support an exposed orientation for the site in the structure of the native protein.

The Mr 140,000 intermediate chain of Chlamydomonas flagellar inner arm dynein is a WD-repeat protein implicated in dynein arm anchoring

Previous structural and biochemical studies have revealed that the inner arm dynein I1 is targeted and anchored to a unique site located proximal to the first radial spoke in each 96-nm axoneme repeat on flagellar doublet microtubules. To determine whether intermediate chains mediate the positioning and docking of dynein complexes, we cloned and characterized the 140-kDa intermediate chain (IC140) of the I1 complex. Sequence and secondary structural analysis, with particular emphasis on beta-sheet organization, predicted that IC140 contains seven WD repeats. Reexamination of other members of the dynein intermediate chain family of WD proteins indicated that these polypeptides also bear seven WD/beta-sheet repeats arranged in the same pattern along each intermediate chain protein. A polyclonal antibody was raised against a 53-kDa fusion protein derived from the C-terminal third of IC140. The antibody is highly specific for IC140 and does not bind to other dynein intermediate chains or proteins in Chlamydomonas flagella. Immunofluorescent microscopy of Chlamydomonas cells confirmed that IC140 is distributed along the length of both flagellar axonemes. In vitro reconstitution experiments demonstrated that the 53-kDa C-terminal fusion protein binds specifically to axonemes lacking the I1 complex. Chemical cross-linking indicated that IC140 is closely associated with a second intermediate chain in the I1 complex. These data suggest that IC140 contains domains responsible for the assembly and docking of the I1 complex to the doublet microtubule cargo.