DNA bending and the curious case of Fos/Jun

Mechanism of stimulation of DNA binding of the transcription factors by human apurinic/apyrimidinic endonuclease 1, APE1

Aerobic respiration generates reactive oxygen species (ROS), which can damage nucleic acids, proteins and lipids. A number of transcription factors (TFs) contain redox-sensitive cysteine residues at their DNA-binding sites, hence ROS-induced thiol oxidation strongly inhibits their recognition of the cognate DNA sequences. Major human apurinic/apyrimidinic (AP) endonuclease 1 (APE1/APEX1/HAP-1), referred also as a redox factor 1 (Ref-1), stimulates the DNA binding activities of the oxidized TFs such as AP-1 and NF-κB. Also, APE1 participates in the base excision repair (BER) and nucleotide incision repair (NIR) pathways to remove oxidative DNA base damage. At present, the molecular mechanism underlying the TF-stimulating/redox function of APE1 and its biological role remains disputed. Here, we provide evidence that, instead of direct cysteine reduction in TFs by APE1, APE1-catalyzed NIR and TF-stimulating activities may be based on transient cooperative binding of APE1 to DNA and induction of conformational changes in the helix. The structure of DNA duplex strongly influences NIR and TF-stimulating activities. Homologous plant AP endonucleases lacking conserved cysteine residues stimulate DNA binding of the p50 subunit of NF-κB. APE1 acts synergistically with low-molecular-weight reducing agents on TFs. Finally, APE1 stimulates DNA binding of the redox-insensitive p50-C62S mutant protein. Electron microscopy imaging of APE1 complexes with DNA revealed preferential polymerization of APE1 on the gapped and intrinsically curved DNA duplexes. Molecular modeling offers a structural explanation how full-length APE1 can oligomerize on DNA. In conclusion, we propose that DNA-directed APE1 oligomerization can be regarded as a substitute for diffusion of APE1 along the DNA contour to probe for anisotropic flexibility. APE1 oligomers exacerbate pre-existing distortions in DNA and enable both NIR activity and DNA binding by TFs regardless of their oxidation state.

MiR-501-3p Forms a Feedback Loop with FOS, MDFI, and MyoD to Regulate C2C12 Myogenesis

Skeletal muscle plays an essential role in maintaining body energy homeostasis and body flexibility. Loss of muscle mass leads to slower wound healing and recovery from illness, physical disability, poor quality of life, and higher health care costs. So, it is critical for us to understand the mechanism of skeletal muscle myogenic differentiation for maintaining optimal health throughout life. miR-501-3p is a novel muscle-specific miRNA, and its regulation mechanism on myoblast myogenic differentiation is still not clear. We demonstrated that FOS was a direct target gene of miR-501-3p, and MyoD regulated miR-501-3p host gene Clcn5 through bioinformatics prediction. Our previous laboratory experiment found that MDFI overexpression promoted C2C12 myogenic differentiation and MyoD expression. The database also showed there is an FOS binding site in the MDFI promoter region. Therefore, we hypothesize that miR-501-3p formed a feedback loop with FOS, MDFI, and MyoD to regulate myoblast differentiation. To validate our hypothesis, we demonstrated miR-501-3p function in the proliferation and differentiation period of C2C12 cells by transfecting cells with miR-501-3p mimic and inhibitor. Then, we confirmed there is a direct regulatory relationship between miR-501-3p and FOS, MyoD and miR-501-3p, FOS and MDFI through QPCR, dual-luciferase reporter system, and ChIP experiments. Our results not only expand our understanding of the muscle myogenic development mechanism in which miRNA and genes participate in controlling skeletal muscle development, but also provide treatment strategies for skeletal muscle or metabolic-related diseases in the future.

Probing the DNA kink structure induced by the hyperthermophilic chromosomal protein Sac7d

Sac7d, a small, abundant, sequence-general DNA-binding protein from the hyperthermophilic archaeon Sulfolobus acidocaldarius, causes a single-step sharp kink in DNA (∼60°) via the intercalation of both Val26 and Met29. These two amino acids were systematically changed in size to probe their effects on DNA kinking. Eight crystal structures of five Sac7d mutant–DNA complexes have been analyzed. The DNA-binding pattern of the V26A and M29A single mutants is similar to that of the wild-type, whereas the V26A/M29A protein binds DNA without side chain intercalation, resulting in a smaller overall bending (∼50°). The M29F mutant inserts the Phe29 side chain orthogonally to the C2pG3 step without stacking with base pairs, inducing a sharp kink (∼80°). In the V26F/M29F-GCGATCGC complex, Phe26 intercalates deeply into DNA bases by stacking with the G3 base, whereas Phe29 is stacked on the G15 deoxyribose, in a way similar to those used by the TATA box-binding proteins. All mutants have reduced DNA-stabilizing ability, as indicated by their lower T_m values. The DNA kink patterns caused by different combinations of hydrophobic side chains may be relevant in understanding the manner by which other minor groove-binding proteins interact with DNA.

Intrinsic curvature in the VP1 gene of SV40: comparison of solution and gel results

DNA restriction fragments that are stably curved are usually identified by polyacrylamide gel electrophoresis because curved fragments migrate more slowly than normal fragments containing the same number of basepairs. In free solution, curved DNA molecules can be identified by transient electric birefringence (TEB) because they exhibit rotational relaxation times that are faster than those of normal fragments of the same size. In this article, the results observed in free solution and in polyacrylamide gels are compared for a highly curved 199-basepair (bp) restriction fragment taken from the VP1 gene in Simian Virus 40 (SV40) and various sequence mutants and insertion derivatives. The TEB method of overlapping fragments was used to show that the 199-bp fragment has an apparent bend angle of 46 +/- 2 degrees centered at sequence position 1922 +/- 2 bp. Four unphased A- and T-tracts and a mixed A3T4-tract occur within a span of approximately 60 bp surrounding the apparent bend center; for brevity, this 60-bp sequence element is called a curvature module. Modifying any of the A- or T-tracts in the curvature module by site-directed mutagenesis decreases the curvature of the fragment; replacing all five A- and T-tracts by random-sequence DNA causes the 199-bp mutant to adopt a normal conformation, with normal electrophoretic mobilities and birefringence relaxation times. Hence, stable curvature in this region of the VP1 gene is due to the five unphased A- and T- tracts surrounding the apparent bend center. Discordant solution and gel results are observed when long inverted repeats are inserted within the curvature module. These insertion derivatives migrate anomalously slowly in polyacrylamide gels but have normal, highly flexible conformations in free solution. Discordant solution and gel results are not observed if the insert does not contain a long inverted repeat or if the long inverted repeat is added to the 199-bp fragment outside the curvature module. The results suggest that long inverted repeats can form hairpins or cruciforms when they are located within a region of the helix backbone that is intrinsically curved, leading to large mobility anomalies in polyacrylamide gels. Hairpin/cruciform formation is not observed in free solution, presumably because of rapid conformational exchange. Hence, DNA restriction fragments that migrate anomalously slowly in polyacrylamide gels are not necessarily stably curved in free solution.

Effects of HU binding on the equilibrium cyclization of mismatched, curved, and normal DNA

The effects of HU, the histone-like protein from Escherichia coli, on the equilibrium cyclization of duplex DNAs have been observed as a function of protein concentration and DNA sequence. The results indicate that the presence of HU significantly enhances the extent of cyclization and increases the melting temperature, T(m), of the cyclized form of the DNA by >10 K. The stabilization of equilibrium cyclization by HU binding is at least -1.2 kcal/mol. The results are consistent with two HU homotypic dimers binding to each of the three 29-mer duplexes studied. One of the 29-mer duplexes contains a central dA tract, one contains mismatched sites, and one a conventional sequence. Stepwise or microscopic association constants, determined from the fluorescence data, range from 1.5 to 0.6 micro M(-1). The binding affinity of the HU dimer is strongest for the mismatched duplex and lowest for the dA tract, consistent with HU dimers having a preference for flexible DNA substrates. These results demonstrate the utility of the equilibrium cyclization approach to monitor DNA-protein interactions. These results have been considered along with those previously obtained to refine a model for the interaction of HU with duplex DNA.

Characterization of Nonspecific Protein−DNA Interactions by 1H Paramagnetic Relaxation Enhancement

Nonspecific protein-DNA interactions play an important role in a variety of contexts related to DNA packaging, nucleoprotein complex formation, and gene regulation. Biophysical characterization of nonspecific protein-DNA interactions at the atomic level poses significant challenges owing to the dynamic nature of such complexes. Although NMR spectroscopy represents a powerful tool for the analysis of dynamic systems, conventional NMR techniques have provided little information on nonspecific protein-DNA interactions. We show that intermolecular (1)H paramagnetic relaxation enhancement (PRE) arising from Mn(2+) chelated to an EDTA-group covalently attached to a thymine base (dT-EDTA-Mn(2+)) in DNA provides a unique approach for probing the global dynamics and equilibrium distribution of nonspecific protein-DNA interactions. For nonspecific DNA binding, similar intermolecular (1)H-PRE profiles are observed on the (1)H resonances of the bound protein when dT-EDTA-Mn(2+) is located at either end of a DNA oligonucleotide duplex. We demonstrate the applicability of this approach to HMG-box proteins and contrast the results obtained for nonspecific DNA binding of the A-box of HMGB-1 (HMGB-1A) with sequence-specific DNA binding of the related SRY protein. Intermolecular (1)H-PRE data demonstrate unambiguously that HMGB-1A binds to multiple sites in multiple orientations even on a DNA fragment as short as 14 base pairs. Combining the (1)H-PRE data with the crystal structure of the HMGB-1 A-box/cisplatin-modified DNA complex allows one to obtain a semiquantitative estimate of the equilibrium populations at the various sites.

Analysis of DNA bending by transient electric birefringence

Transient electric birefringence has been used to analyze DNA bending in six restriction fragments containing 171, 174, 207, 263, 289, and 471 bp in three different low ionic strength buffers. The target fragments contain sequences corresponding to the apparent bend centers in pUC19 and Litmus 28, previously identified by the circular permutation assay (Strutz, K.; Stellwagen, N. C. Electrophoresis 1996, 17, 989-995). The target fragments migrate anomalously slowly in polyacrylamide gels and exhibit birefringence relaxation times that are shorter than those of restriction fragments of the same size, taken from nonbent regions of the same plasmids. Apparent bend angles ranging from 30 degrees to 41 degrees were calculated for the target fragments by tau-ratio method. The bend angles of four of the target fragments were independent of temperature from 4 degrees C to 20 degrees C, but decreased when the temperature was increased to 37 degrees C. The bend angles of the other two target fragments were independent of temperature over the entire range examined, 4 degrees -37 degrees C. Hence, the thermal stability of sequence-dependent bends in random-sequence DNA is variable. The bend angles of five of the six target fragments were independent of the presence or absence of Mg2+ ions in the solution, indicating most of the target fragments were stably bent or curved, rather than anisometrically flexible. Restriction fragments containing 219 and 224 bp, with sequences somewhat offset from the sequence of the 207 bp fragment, were also studied. Comparison of the tau-ratios of these overlapping fragments allowed both the bend angle and bend position to be independently determined. These methods should be useful for analyzing sequence-dependent bending in other random-sequence DNAs.

Analysis of the intrinsic bend in the M13 origin of replication by atomic force microscopy

Atomic force microscopy (AFM) has been used to image a 471-bp bent DNA restriction fragment derived from the M13 origin of replication in plasmid LITMUS 28, and a 476-bp normal, unbent fragment from plasmid pUC19. The most probable angle of curvature of the 471-bp DNA fragment is 40-50 degrees, in reasonably good agreement with the bend angle determined by transient electric birefringence, 38 degrees +/- 7 degrees. The normal 476-bp DNA fragment exhibited a Gaussian distribution of bend angles centered at 0 degrees, indicating that this fragment does not contain an intrinsic bend. The persistence length, P, was estimated to be 60 +/- 8 and 62 +/- 8 nm for the 471- and 476-bp fragments, respectively, from the observed mean-square end-to-end distances in the AFM images. Since the P-values of the normal and bent fragments are close to each other, the overall flexibility of DNA fragments of this size is only marginally affected by the presence of a stable bend. The close agreement of AFM and transient electric birefringence results validates the suitability of both methods for characterizing DNA bending and flexibility.

An assessment of three dinucleotide parameters to predict DNA curvature by quantitative comparison with experimental data

Curved DNA fragments are often found near functionally important sites such as promoters and origins of replication, and hence sequence-dependent DNA curvature prediction is of great utility in genomics and bioinformatics. In light of this, an assessment of three different dinucleotide step parameters (based on gel retardation as well as crystal structure data) is carried out. These parameters (BMHT, LB and CS) are evaluated quantitatively for their ability to predict correctly the experimental results of a large set of nucleic acid sequences containing A-tracts as well as GC-rich motifs. This set contained around 40 synthetic as well as natural sequences whose solution properties have been well characterized experimentally. All three models could account reasonably well for curvature in the various DNA sequences. The CS model, where dinucleotide parameters are calculated from crystal structure data, consistently shows slightly better correlation with experimental data. Our simple analysis also indicates that presently available trinucleotide parameters fail to predict curvature in some of the well-characterized sequences. The study shows that the dinucleotide parameters with some further refinement can be used to predict sequence-dependent curvature correctly in genomic sequences.

Electrospray ionization mass spectrometry of oligonucleotide complexes with drugs, metals, and proteins

I. Introduction 61 II. Binding of Small Molecules to DNA 62 A. Covalent Binding 62 B. Reversible (Noncovalent) DNA-Binding Agents 65 III. DNA-Metal Ion Complexes 67 A. Platinum Complexes 70 B. Other Metal Ions 73 IV. DNA-Protein Complexes 74 A. Introduction 74 B. ESI-MS of DNA-Protein Complexes 76 C. ESI-MS Analysis of Proteolytic Products of DNA-Protein Complexes 79 D. ESI-MS of Ternary DNA-Protein-Ligand Complexes 80 V. Conclusions 80 Abbreviations 81 References 81 --Interactions of DNA with drugs, metal ions, and proteins are important in a wide variety of biological processes. With the advent of electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI), mass spectrometry (MS) is now a well-established tool for the characterization of the primary structures of biopolymers. The gentle nature of the ESI process, however, means that ESI-MS is also finding application for the study of noncovalent and other fragile biomolecular complexes. We outline here the progress, to date, in the use of ESI-MS for the study of noncovalent drug-DNA and protein-DNA complexes together with strategies that can be employed to examine the binding of small molecules and metal complexes to DNA. In the case of covalent complexes with DNA, sequence information can be derived from ESI-MS used in conjunction with tandem mass spectrometry (MS/MS) and/or enzymatic digestion. MS/MS can also be used to probe the relative binding affinities of drugs that bind to DNA via noncovalent interactions. Overall, the work in this area, to date has demonstrated that ESI-MS and MS/MS will prove to be valuable complements to other structural methods, offering advantages in terms of speed, specificity, and sensitivity. (c) 2001 John Wiley & Sons, Inc.

The effects of 5R-5,6-dihydro-5-hydroxythymidine on duplex DNA stability and structure

An improved method for the chemical synthesis of oligodeoxynucleotides containing 5 R -5,6-dihydro-5-hydroxythymidine (1) at a defined site is reported. UV melting studies carried out on duplexes containing1synthesized in this manner correlate with previously reported enzyme inhibition experiments, as well as computational studies. The melting experiments suggest that1destabilizes duplex DNA, but that the lesion preferentially base pairs to deoxyadenosine. These experiments also suggest that the presence of1in a duplex disrupts base pairing at the 5'-adjacent nucleotide and results in the thermally preferred misincorporation of purines opposite the 5'-deoxyadenosine stacked above 1 at this position. Despite the disruptions in base stacking, the UV melting experiments and enzymatic ligation/electrophoretic migration assays are consistent with the predicted macroscopic duplex structure containing intrahelical nucleotides.

The SKN-1 amino-terminal arm is a DNA specificity segment

The Caenorhabditis elegans SKN-1 protein binds DNA through a basic region like those of bZIP proteins and through a flexible amino-terminal arm segment similar to those with which numerous helix-turn-helix proteins bind to bases in the minor groove. A recent X-ray crystallographic structure suggests that the SKN-1 amino-terminal arm provides only nonspecific DNA binding. In this study, however, we demonstrate that this segment mediates recognition of an AT-rich element that is part of the preferred SKN-1 binding site and thereby significantly increases the sequence specificity with which SKN-1 binds DNA. Mutagenesis experiments show that multiple amino acid residues within the arm are involved in binding. These residues provide binding affinity through distinct but partially redundant interactions and enhance specificity by discriminating against alternate sites. The AT-rich element minor groove is important for binding of the arm, which appears to affect DNA conformation in this region. This conformational effect does not seem to involve DNA bending, however, because the arm does not appear to affect a modest DNA bend that is induced by SKN-1. The data illustrate an example of how a small, flexible protein segment can make an important contribution to DNA binding specificity through multiple interactions and mechanisms.

Mechanisms of DNA bending

Genome packaging and gene regulation require DNA bending. Recent developments in the elucidation of the mechanisms involved in DNA bending include new X-ray structures (most notably that of the mammalian nucleosome) wherein DNA is bent, controversy surrounding interpretation of DNA-bending experiments with basic-leucine zipper proteins, studies of electrostatic effects in DNA bending, and the design of artificial DNA-bending ligands.