Globular protein gelation

Composite hydrogels assembled from food-grade biopolymers: Fabrication, properties, and applications

Biopolymer hydrogels have a broad range of applications as soft materials in a variety of commercial products, including foods, cosmetics, agrochemicals, personal care products, pharmaceuticals, and biomedical products. They consist of a network of entangled or crosslinked biopolymer molecules that traps relatively large quantities of water and provides semi-solid properties, like viscoelasticity or plasticity. Composite biopolymer hydrogels contain inclusions (fillers) to enhance their functional properties, including solid particles, liquid droplets, gas bubbles, nanofibers, or biological cells. These fillers vary in their composition, size, shape, rheology, and surface properties, which influences their impact on the rheological properties of the biopolymer hydrogels. In this article, the various types of biopolymers used to fabricate composite hydrogels are reviewed, with an emphasis on edible proteins and polysaccharides from sustainable sources, such as plants, algae, or microbial fermentation. The different kinds of gelling mechanism exhibited by these biopolymers are then discussed, including heat-, cold-, ion-, pH-, enzyme-, and pressure-set mechanisms. The different ways that biopolymer molecules can organize themselves in single and mixed biopolymer hydrogels are then highlighted, including polymeric, particulate, interpenetrating, phase-separated, and co-gelling systems. The impacts of incorporating fillers on the rheological properties of composite biopolymer hydrogels are then discussed, including mathematical models that have been developed to describe these effects. Finally, potential applications of composite biopolymer hydrogels are presented, including as delivery systems, packaging materials, artificial tissues, wound healing materials, meat analogs, filters, and adsorbents. The information provided in this article is intended to stimulate further research into the development and application of composite biopolymer hydrogels.

Impacts of Industrial Modification on the Structure and Gel Features of Soy Protein Isolate and its Composite Gel with Myofibrillar Protein

Native soy protein isolate (N-SPI) has a low denaturation point and low solubility, limiting its industrial application. The influence of different industrial modification methods (heat (H), alkaline (A), glycosylation (G), and oxidation (O)) on the structure of SPI, the properties of the gel, and the gel properties of soy protein isolate (SPI) in myofibril protein (MP) was evaluated. The study found that four industrial modifications did not influence the subunit composition of SPI. However, the four industrial modifications altered SPI's secondary structure and disulfide bond conformation content. A-SPI exhibits the highest surface hydrophobicity and I_850/830 ratio but the lowest thermal stability. G-SPI exhibits the highest disulfide bond content and the best gel properties. Compared with MP gel, the addition of H-SPI, A-SPI, G-SPI, and O-SPI components significantly improved the properties of the gel. Additionally, MP-ASPI gel exhibits the best properties and microstructure. Overall, the four industrial modification effects may impact SPI's structure and gel properties in different ways. A-SPI could be a potential functionality-enhanced soy protein ingredient in comminuted meat products. The present study results will provide a theoretical basis for the industrialized production of SPI.

Effects of Cysteine on Physicochemical Properties of High-Moisture Extrudates Prepared from Plant Protein

The effects of cysteine addition (0%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%) on the physicochemical properties of plant-based extrudates by high-moisture extrusion were investigated. The texturization degree, rheological properties, hardness, springiness and chewiness of the extrudates significantly improved with the addition of cysteine (<0.15%). Analysis of the microstructure showed that the addition of cysteine (<0.15%) improved the formation of the fiber structure in the extrudates. Cysteine (<0.15%) promoted the formation of new disulfide bonds and non-covalent bonds by changing the disulfide bonds of protein molecules and enhanced the cross-linking degree between proteins. However, the excessive addition of cysteine (>0.15%) had a negative impact on the formation of fiber structure. Analysis of secondary structure suggested that the ordered β-sheet structures gradually converted to the disordered β-turn and random coil structures with the addition of cysteine (>0.15%). In addition, analysis of odor properties with the addition of cysteine using an electronic nose showed the difference in volatile components of the extrudates mainly existed in halides, hydrocarbons, sulfides and amines. On the whole, the addition of cysteine could improve the quality of plant-based extrudates.

Formulation and characterization of plant-based egg white analogs using RuBisCO protein

RuBisCO protein, which can be isolated from abundant and sustainable plant sources, can mimic some of the desirable functional attributes of egg white proteins. In this study, plant-based egg white analogs were successfully produced using 10 w% RuBisCO solutions (pH 8). These protein solutions had similar apparent viscosity-shear rate profiles, shear modulus-temperature profiles, gelling temperatures, and final gel strengths as egg white. However, there were some differences. RuBisCO protein gels were slightly darker than egg white, which was attributed to the presence of phenolic impurities. Moreover, RuBisCo proteins exhibited a single thermal transition temperature (∼66 °C) whereas egg white proteins exhibited two (∼66 and ∼81 °C). RuBisCO gels were more brittle but less chewy and resilient than egg white gels. This study provides valuable insights into the potential of RuBisCO protein for formulating plant-based egg white analogs.

Seeking Solvation: Exploring the Role of Protein Hydration in Silk Gelation

The mechanism by which arthropods (e.g., spiders and many insects) can produce silk fibres from an aqueous protein (fibroin) solution has remained elusive, despite much scientific investigation. In this work, we used several techniques to explore the role of a hydration shell bound to the fibroin in native silk feedstock (NSF) from Bombyx mori silkworms. Small angle X-ray and dynamic light scattering (SAXS and DLS) revealed a coil size (radius of gyration or hydrodynamic radius) around 12 nm, providing considerable scope for hydration. Aggregation in dilute aqueous solution was observed above 65 °C, matching the gelation temperature of more concentrated solutions and suggesting that the strength of interaction with the solvent (i.e., water) was the dominant factor. Infrared (IR) spectroscopy indicated decreasing hydration as the temperature was raised, with similar changes in hydration following gelation by freezing or heating. It was found that the solubility of fibroin in water or aqueous salt solutions could be described well by a relatively simple thermodynamic model for the stability of the protein hydration shell, which suggests that the affected water is enthalpically favoured but entropically penalised, due to its reduced (vibrational or translational) dynamics. Moreover, while the majority of this investigation used fibroin from B. mori, comparisons with published work on silk proteins from other silkworms and spiders, globular proteins and peptide model systems suggest that our findings may be of much wider significance.

Comparison of bovine serum albumin glycation by ribose and fructose in vitro and in vivo

Advanced glycation end products (AGEs) play a critical pathogenic role in the development of diabetic complications. Recent studies have shown that diabetes is associated with not only abnormal glucose metabolism but also abnormal ribose and fructose metabolism, although glucose is present at the highest concentration in humans. The glycation ability and contribution of ribose and fructose to diabetic complications remain unclear. Here, the glycation ability of ribose, fructose and glucose under a mimic physiological condition, in which the concentration of ribose or fructose was one-fiftieth that of glucose, was compared. Bovine serum albumin (BSA) was used as the working protein in our experiments. Ribose generated more AGEs and was markedly more cytotoxic to SH-SY5Y cells than fructose. The first-order rate constant of ribose glycation was found to be significantly greater than that of fructose glycation. LC-MS/MS analysis revealed 41 ribose-glycated Lys residues and 12 fructose-glycated residues. Except for the shared Lys residues, ribose reacted selectively with 17 Lys, while no selective Lys was found in fructose-glycated BSA. Protein conformational changes suggested that ribose glycation may induce BSA into amyloid-like monomers compared with fructose glycation. The levels of serum ribose were correlated positively with glycated serum protein (GSP) and diabetic duration in type 2 diabetes mellitus (T2DM), respectively. These results indicate that ribose has a greater glycation ability than fructose, while ribose largely contributes to the production of AGEs and provides a new insight to understand in the occurrence and development of diabetes complications.

Chickpea protein ingredients: A review of composition, functionality, and applications

Chickpea (Cicer arietinum L.) is a pulse consumed all over the world, representing a good source of protein, as well as fat, fiber, and other carbohydrates. As a result of the growing global population the demand for the protein component of this pulse is increasing and various approaches have been proposed and developed to extract same. In this review the composition, functionality, and applications of chickpea protein ingredients are described. Moreover, methods to enhance protein quality have been identified, as well as applications of the coproducts resulting from protein extraction and processing. The principal dry and wet protein enrichment approaches, resulting in protein concentrates and isolates, include air classification, alkaline/acid extraction, salt extraction, isoelectric precipitation, and membrane filtration. Chickpea proteins exhibit good functional properties such as solubility, water and oil absorption capacity, emulsifying, foaming, and gelling. During protein enrichment, the functionality of protein can be enhanced in addition to primary processing (e.g., germination and dehulling, fermentation, enzymatic treatments). Different applications of chickpea protein ingredients, and their coproducts, have been identified in research, highlighting the potential of these ingredients for novel product development and improvement of the nutritional profile of existing food products. Formulations to meet consumer needs in terms of healthy and sustainable foods have been investigated in the literature and can be further explored. Future research may be useful to improve applications of the specific coproducts that result from the extraction of chickpea proteins, thereby leading to more sustainable processes.

Protein microparticles visualize the contact network and rigidity onset in the gelation of model proteins

Protein aggregation into gel networks is of immense importance in diverse areas from food science to medical research; however, it remains a grand challenge as the underlying molecular interactions are complex, difficult to access experimentally, and to model computationally. Early stages of gelation often involve protein aggregation into protein clusters that later on aggregate into a gel network. Recently synthesized protein microparticles allow direct control of these early stages of aggregation, decoupling them from the subsequent gelation stages. Here, by following the gelation of protein microparticles directly at the particle scale, we elucidate in detail the emergence of a percolating structure and the onset of rigidity as measured by microrheology. We find that the largest particle cluster, correlation length, and degree of polymerization all diverge with power laws, while the particles bind irreversibly indicating a nonequilibrium percolation process, in agreement with recent results on weakly attractive colloids. Concomitantly, the elastic modulus increases in a power-law fashion as determined by microrheology. These results give a consistent microscopic picture of the emergence of rigidity in a nonequilibrium percolation process that likely underlies the gelation in many more systems such as proteins, and other strongly interacting structures originating from (bio)molecules.

Impact of the Simulated Gastric Digestion Methodology on the In Vitro Intestinal Proteolysis and Lipolysis of Emulsion Gels

The aim of this work was to study the impact of the methodology of in vitro gastric digestion (i.e., in terms of motility exerted and presence of gastric emptying) and gel structure on the degree of intestinal proteolysis and lipolysis of emulsion gels stabilized by whey protein isolate. Emulsions were prepared at pH 4.0 and 7.0 using two homogenization pressures (500 and 1000 bar) and then the emulsions were gelled by heat treatment. These gels were characterized in terms of texture analysis, and then were subjected to one of the following gastric digestion methods: in vitro mechanical gastric system (IMGS) or in vitro gastric digestion in a stirred beaker (SBg). After gastric digestion, the samples were subjected to in vitro intestinal digestion in a stirred beaker (SBi). Hardness, cohesiveness, and chewiness were significantly higher in gels at pH 7.0. The degree of proteolysis was higher in samples digested by IMGS–SBi (7–21%) than SBg–SBi (3–5%), regardless of the gel’s pH. For SBg–SBi, the degree of proteolysis was not affected by pH, but when operating the IMGS, higher hydrolysis values were obtained for gels at pH 7.0 (15–21%) than pH 4.0 (7–13%). Additionally, the percentage of free fatty acids (%FFA) released was reduced by 47.9% in samples digested in the IMGS–SBi. For the methodology SBg–SBi, the %FFA was not affected by the pH, but in the IMGS, higher values were obtained for gels at pH 4.0 (28–30%) than pH 7.0 (15–19%). Our findings demonstrate the importance of choosing representative methods to simulate food digestion in the human gastrointestinal tract and their subsequent impact on nutrient bioaccessibility.

Heat induced gelation of pulse protein networks

This study examines the effect of salts (0.5 M NaCl or 0.25 M CaCl₂) and protein concentration (7.5-15%) on the gel-forming abilities of lentil (LPC), yellow pea (YPC), and faba bean (FPC) protein concentrates formed at pH 7.0. The surface hydrophobicity of YPC (84.8 arbitrary units, a.u.) was found to be lower than LPC (147.2 a.u.) and FPC (135.0 a.u.). In contrast, the surface charge for LPC, YPC, and FPC was -37.8, -28.4, and -29.3 mV, respectively. The Lg/Vn ratio of YPCs was determined as 0.65 followed by LPC (0.57) and FPC (0.41). The presence of salts reduced the least gelling concentration. LPC and FPC also appeared to have a more ordered structure than YPC as evident by CLSM. The network appeared more ordered as the protein concentration increased or in the presence of NaCl or CaCl₂ according to CLSM and synchrotron based micro computed tomography (µCT).

Quantifications of Oleocolloid Matrices Made of Whey Protein and Oleogels

Consumer demand for high protein content and plant-based fat has necessitated novel approaches to healthy food products. In response to this need, oleogels (OG) (structured liquid oils) emerged as a possible means of not only replacing saturated and trans fats but also delivering food protein. Nevertheless, an in-depth view of the structure of networks made of OG and protein is deficient. Hence, the objective of this study is developing oleocolloid (OC) (whey protein and rice bran wax OG) and hydro-oleocolloid (HOC) (OC + water) matrices with varying protein content (2.5–7.5%) to characterize their structural properties. Thermal analysis of the matrices via differential scanning calorimetry (DSC) documented the effects of hydrophobic interactions on the protein structure and its stability. Whey protein denaturation temperature increased from 74.9 °C to 102.8 °C in the presence of high oleic soybean oil. The effects of vegetable oil on WPI structure was also verified by FTIR spectroscopy. Data analysis revealed slight structural changes of the WPI secondary structure in the hydrophobic oil medium and the α-helix and β-sheet proportion in the emulsion medium was significantly altered. Similar analysis was performed in OC and HOC networks to quantify possible interactions between protein and rice bran wax. Results indicated that the protein was denatured during the thermal and mechanical conditions required for the oleogelation process, while it did not affect the systems’ solid fat content (SFC) and polymorphic patterns of the oleogels. However, DSC analysis showed different onset of melting for OC and HOC samples due to colloidal interactions between the protein and the lipid phase. The role of these chemistry was confirmed by microscopy analyses where OC and HOC matrices displayed notably different microstructural properties. The observed differences in the structural properties between OC and HOC matrices indicate the different colloidal interactions mediated by oleogelation process and the liquid medium type (oil vs. emulsion).

Fabrication and characterization of lentil protein gels from fibrillar aggregates and the gelling mechanism study

Heat-induced aggregation and gelation in lentil protein isolate (LPI) were studied over pH levels (pH 2-9), protein concentration (1-13%, w/w), and heating time (0.5-16 h). The LPI gels were formed from both fibrillar and particulate aggregates at pH 2 and 7, respectively. The gels formed from fibrillar aggregates at pH 2 were translucent and showed homogeneous and highly interconnected networks. While lentil protein showed weak gelling capacity, the gels prepared from LPI aggregates possessed good mechanical properties, and the optimized gel demonstrated a compressive strength of 2.37 kPa and a water holding capacity of 80.62%. The gelling mechanism study suggests that the high aspect ratio allowed fibrillar aggregates to build a higher level of structures with positive characteristics along with other attractive interactions including hydrophobic interactions and disulfide bonds to build strong gels. Therefore, this research has developed a new strategy to prepare improved lentil protein gels for food texturization from LPI fibrillar aggregates.

Structural and rheological changes of texturized mung bean protein induced by feed moisture during extrusion

Mung bean protein isolate was texturized at different feed moisture contents (30.0, 49.3, and 60.0%) at a constant temperature (144.57 °C) to evaluate the changes in protein profile, solubility, thermal, structural (at secondary and tertiary levels) and rheological properties. SDS-PAGE, surface hydrophobicity, circular dichroism, FTIR spectroscopy, and fluorescence analyses revealed protein unfolding, aggregation, and structural rearrangement as a function of feed moisture content. Extrusion at 49.3% feed moisture produced texturized mung bean protein (TMBP) with favourable partial denaturation, the formation of small aggregates, improved solubility, and digestibility with strong gel forming behaviour, whereas 30.0 and 60.0% moisture content resulted in complete protein denaturation, the undesirable formation of large aggregates and weak gels. In conclusion, protein denaturation and formation of aggregates can be controlled by manipulating feed moisture content during extrusion, with 49.3% feed moisture prompting favourable partial denaturation to produce TMBP with desirable qualities for use as a vegetarian-based meat extender.

Gel properties of salty liquid whole egg as affected by preheat treatment

Heat treatment is an indispensable processing step of seasoned liquid egg. The effects of preheat treatment (60-75 °C) on gel properties of liquid whole egg (LWE) at different NaCl concentrations (0-3%, w/w) were investigated to provide guidance for the production of salty LWE. Results showed that LWE exhibited higher particle size after heating, with coincidental increases in surface hydrophobicity and decreases in protein solubility. While LWE with NaCl added exhibited increase in protein solubility and decrease in particle size of aggregates. Electrophoresis and optical microscopy showed that NaCl would induce the transformation of egg granules from insoluble form to soluble form, inhibiting the aggregation of LWE proteins during preheat treatment, reflected by the reduced particle size. The analysis of gel aggregated force and texture indicated that NaCl addition and preheat treatment can improve gelling properties of LWE synergistically by strengthening the hydrophobic interaction and hydrogen bonds.

Rational Design of Amyloid-Like Fibrillary Structures for Tailoring Food Protein Techno-Functionality and Their Potential Health Implications

To control and enhance protein functionality is a major challenge for food scientists. In this context, research on food protein fibril formation, especially amyloid fibril formation, holds much promise. We here first provide a concise overview of conditions, which affect amyloid formation in food proteins. Particular attention is directed towards amyloid core regions because these sequences promote ordered aggregation. Better understanding of this process will be key to tailor the fibril formation process. Especially seeding, that is, adding preformed protein fibrils to protein solutions to accelerate fibril formation holds promise to tailor aggregation and fibril techno-functionality. Some studies have already indicated that food protein fibrillation indeed improves their techno-functionality. However, much more research is necessary to establish whether protein fibrils are useful in complex food systems and whether and to what extent they resist food processing unit operations. In this review the effect of amyloid formation on gelation, interfacial properties, foaming, and emulsification is discussed. Despite their prevalent role as functional structures, amyloids also receive a lot of attention due to their association with protein deposition diseases, prompting us to thoroughly investigate the potential health impact of amyloid-like aggregates in food. A literature review on the effect of the different stages of the human digestive process on amyloid toxicity leads us to conclude that food-derived amyloid fibrils (even those with potential pathogenic properties) very likely have minimal impact on human health. Nevertheless, prior to wide-spread application of the technology, it is highly advisable to further verify the lack of toxicity of food-derived amyloid fibrils.

Effects of salting treatment on the physicochemical properties, textural properties, and microstructures of duck eggs

In order to illuminate the forming process of salted egg, the effects of the brine solution with different salt concentrations on the physicochemical properties, textural properties, and microstructures of duck eggs were evaluated using conventional physicochemical property determination methods. The results showed that the moisture contents of both the raw and cooked egg whites and egg yolks, the springiness of the raw egg yolks and cooked egg whites exhibited a decreasing trend with the increase in the salting time and salt concentration. The salt content, oil exudation and the hardness of the raw egg yolks showed a constantly increasing trend. Viscosity of the raw egg whites showed an overall trend in which it first deceased and then increased and decreased again, which was similar to the trend of the hardness of the cooked egg whites and egg yolks. As the salting proceeded, the pH value of the raw and cooked egg whites declined remarkably and then declined slowly, whereas the pH of the raw and cooked egg yolks did not show any noticeable changes. The effect of salting on the pH value varied significantly with the salt concentration in the brine solution. Scanning electron microscopy (SEM) revealed that salted yolks consist of spherical granules and embedded flattened porosities. It was concluded that the treatment of salt induces solidification of yolk, accompanied with higher oil exudation and the development of a gritty texture. Different salt concentrations show certain differences.

The Rheology behind Stress-Induced Solidification in Native Silk Feedstocks

The mechanism by which native silk feedstocks are converted to solid fibres in nature has attracted much interest. To address this question, the present work used rheology to investigate the gelation of Bombyx mori native silk feedstock. Exceeding a critical shear stress appeared to be more important than shear rate, during flow-induced initiation. Compositional changes (salts, pH etc.,) were not required, although their possible role in vivo is not excluded. Moreover, after successful initiation, gel strength continued to increase over a considerable time under effectively quiescent conditions, without requiring further application of the initial stimulus. Gelation by elevated temperature or freezing was also observed. Prior to gelation, literature suggests that silk protein adopts a random coil configuration, which argued against the conventional explanation of gelation, based on hydrophilic and hydrophobic interactions. Instead, a new hypothesis is presented, based on entropically-driven loss of hydration, which appears to explain the apparently diverse methods by which silk feedstocks can be gelled.

Temperature-mediated recombinant anthrax protective antigen aggregate development: Implications for toxin formation and immunogenicity

Anthrax vaccines containing recombinant PA (rPA) as the only antigen face a stability issue: rPA forms aggregates in solution after exposure to temperatures ⩾40°C, thus losing its ability to form lethal toxin (LeTx) with Lethal Factor. To study rPA aggregation's impact on immune response, we subjected rPA to several time and temperature combinations. rPA treated at 50°C for 30min formed high mass aggregates when analyzed by gel electrophoresis and failed to form LeTx as measured by a macrophage lysis assay (MLA). Aggregated rPA-formed LeTx was about 30 times less active than LeTx containing native rPA. Mice immunized with heat-treated rPA combined with Al(OH)3 developed antibody titers about 49 times lower than mice immunized with native rPA, as measured by a Toxicity Neutralization Assay (TNA). Enzyme Linked Immunosorbent Assay (ELISA) of the same immune sera showed anti-rPA titers only 2-7 times lower than titers elicited by native rPA. Thus, rPA's ability to form LeTx correlates with its production of neutralizing antibodies, and aggregation significantly impairs the protein's antibody response. However, while these findings suggest MLA has some value as an in-process quality test for rPA in new anthrax vaccines, they also confirm the superiority of TNA for use in vaccine potency.

Self-healing of thermally-induced, biocompatible and biodegradable protein hydrogel

Almost 100% self-healing extent recovery performance was observed in thermal-induced bovine serum albumin hydrogel with external heating. Good biocompatibility and biodegradability of this materials were also demonstrated.

Hierarchical molecular dynamics of bovine serum albumin in concentrated aqueous solution below and above thermal denaturation

The dynamics of proteins in solution is a complex and hierarchical process, affected by the aqueous environment as well as temperature. We present a comprehensive study on nanosecond time and nanometer length scales below, at, and above the denaturation temperature Td. Our experimental data evidence dynamical processes in protein solutions on three distinct time scales. We suggest a consistent physical picture of hierarchical protein dynamics: (i) self-diffusion of the entire protein molecule is confirmed to agree with colloid theory for all temperatures where the protein is in its native conformational state. At higher temperatures T > Td, the self-diffusion is strongly obstructed by cross-linking or entanglement. (ii) The amplitude of backbone fluctuations grows with increasing T, and a transition in its dynamics is observed above Td. (iii) The number of mobile side-chains increases sharply at Td while their average dynamics exhibits only little variations. The combination of quasi-elastic neutron scattering and the presented analytical framework provides a detailed microscopic picture of the protein molecular dynamics in solution, thereby reflecting the changes of macroscopic properties such as cluster formation and gelation.

Versatile Cellulose-Based Carbon Aerogel for the Removal of Both Cationic and Anionic Metal Contaminants from Water

Hydrothermal carbonization of cellulose in the presence of the globular protein ovalbumin leads to the formation of nitrogen-doped carbon aerogel with a fibrillar continuous carbon network. The protein plays here a double role: (i) a natural source of nitrogen functionalities (2.1 wt %) and (ii) structural directing agent (S(BET) = 38 m(2)/g). The applicability in wastewater treatment, namely, for heavy metal removal, was examined through adsorption of Cr(VI) and Pb(II) ion solely and in a mixed bicomponent aqueous solutions. This cellulose-based carbogel shows an enhanced ability to remove both Cr(VI) (∼68 mg/g) and Pb(II) (∼240 mg/g) from the targeted solutions in comparison to other carbon materials reported in the literature. The presence of competing ions showed little effect on the adsorption efficiency toward Cr(VI) and Pb(II).

The effect of protein aggregate morphology on phase separation in mixtures with polysaccharides

The morphology of aggregates formed by heating the globular protein β-lactoglobulin (β-lg) changes with the addition of a small amount of CaCl2, from small strands to larger spherical aggregates (microgels). We investigated the effect of this morphological transition on the structure of mixtures of β-lg aggregates with the polysaccharide κ-carrageenan (κ-car), using confocal laser scanning microscopy and dynamic light scattering. The change in the morphology of the β-lg aggregates strongly reduced the κ-car concentration at which the system phase separated. As a consequence a dramatic change in the structure of the mixtures occurred over a narrow range of the CaCl2 concentration. Phase separation leads to the formation of micron-sized protein rich domains that have a tendency to stick together in large flocs. There is a big difference between the protein concentrations in the two phases, but the κ-car concentration is only weakly lower in the protein rich phase. A comparison is made between mixtures prepared at room temperature, after separately heating β-lg, and heated mixtures of native β-lg and κ-car. The micro-phase separated structure of the two systems is similar, but the aggregates disperse upon dilution in the former case, while they are covalently bound within the domains in the latter case. Other, more subtle, differences were also observed. The results explain the very high sensitivity of the structure of β-lg/κ-car mixtures to calcium ions.

Albumin hydrogels formed by electrostatically triggered self-assembly and their drug delivery capability

Biological hydrogels are fundamentally biocompatible and have intrinsic similarities to extracellular matrices in medical applications and drug delivery systems. Herein we demonstrate the ability to form drug-eluting protein hydrogels using a novel mechanism that involves the electrostatically triggered partial denaturation and self-assembly of the protein via changes in pH. Partial denaturation increases the protein's solvent exposed hydrophobic surface area, which then drives self-assembly of the protein into a hydrogel within 10 min at 37 °C. We describe the properties of an albumin hydrogel formed by this mechanism. Intrinsic drug binding properties of albumin to all-trans retinoic acid (atRA) are conserved through the partial denaturation process, as confirmed by fluorescence quenching. atRA released from the hydrogel inhibited smooth muscle cell migration as per an in vitro scratch wound assay. Atomistic molecular dynamics and potential of mean force calculations show the preservation and potential creation of new atRA binding sites with a binding energy of -41 kJ/mol. The resulting hydrogel is also biocompatible and exhibits rapid postgelation degradation after its implantation in vivo. This interdisciplinary work provides a new tool for the development of biocompatible protein hydrogel drug delivery systems.