Design and discovery of HIV-1 integrase inhibitors

An Overview of Coumarin as a Versatile and Readily Accessible Scaffold with Broad-Ranging Biological Activities

Privileged structures have been widely used as an effective template for the research and discovery of high value chemicals. Coumarin is a simple scaffold widespread in Nature and it can be found in a considerable number of plants as well as in some fungi and bacteria. In the last years, these natural compounds have been gaining an increasing attention from the scientific community for their wide range of biological activities, mainly due to their ability to interact with diverse enzymes and receptors in living organisms. In addition, coumarin nucleus has proved to be easily synthetized and decorated, giving the possibility of designing new coumarin-based compounds and investigating their potential in the treatment of various diseases. The versatility of coumarin scaffold finds applications not only in medicinal chemistry but also in the agrochemical field as well as in the cosmetic and fragrances industry. This review is intended to be a critical overview on coumarins, comprehensive of natural sources, metabolites, biological evaluations and synthetic approaches.

Evaluation of novel N'-(3-hydroxybenzoyl)-2-oxo-2H-chromene-3-carbohydrazide derivatives as potential HIV-1 integrase inhibitors

In an attempt to identify potential new agents that are active against HIV-1 IN, a series of novel coumarin-3-carbohydrazide derivatives were designed and synthesised. The toxicity profiles of these compounds showed that they were non-toxic to human cells and they exhibited promising anti-HIV-1 IN activities with IC₅₀ values in nM range. Also, an accompanying molecular modeling study showed that the compounds bind to the active pocket of the enzyme.

Design, Synthesis, and Biological Evaluation of 1,2-Dihydroisoquinolines as HIV-1 Integrase Inhibitors

6-Endo-dig-cyclization is an efficient method for the synthesis of 1,2-dihydroisoquinolines. We have synthesized few 1,2-dihydroisoquinolines having different functionality at the C-1, C-3, C-7, and N-2 positions for evaluation against HIV-1 integrase (HIV1-IN) inhibitory activity. A direct nitro-Mannich condensation of o-alkynylaldimines and dual activation of o-alkynyl aldehydes by inexpensive cobalt chloride yielded desired compounds. Out of 24 compounds, 4m and 6c came out as potent integrase inhibitors in in vitro strand transfer (ST) assay, with IC50 value of 0.7 and 0.8 μM, respectively. Molecular docking of these compounds in integrase revealed strong interaction between metal and ligands, which stabilizes the enzyme-inhibitor complex. The ten most active compounds were subjected to antiviral assay. Out of those, 6c reduced the level of p24 viral antigen by 91%, which is comparable to RAL in antiviral assay. Interestingly, these compounds showed similar ST inhibitory activity in G140S mutant, suggesting they can act against resistant strains.

Interactions of HIV-1 proteins as targets for developing anti-HIV-1 peptides

Protein–protein interactions (PPI) are essential in every step of the HIV replication cycle. Mapping the interactions between viral and host proteins is a fundamental target for the design and development of new therapeutics. In this review, we focus on rational development of anti-HIV-1 peptides based on mapping viral–host and viral–viral protein interactions all across the HIV-1 replication cycle. We also discuss the mechanism of action, specificity and stability of these peptides, which are designed to inhibit PPI. Some of these peptides are excellent tools to study the mechanisms of PPI in HIV-1 replication cycle and for the development of anti-HIV-1 drug leads that modulate PPI.

A platform for designing HIV integrase inhibitors. Part 1: 2-hydroxy-3-heteroaryl acrylic acid derivatives as novel HIV integrase inhibitor and modeling of hydrophilic and hydrophobic pharmacophores

We present a novel series of HIV integrase inhibitors, showing IC(50)s ranging from 0.01 to over 370microM in an enzymatic assay. Furthermore, pharmacophore modeling study for the inhibitors was carried out to elucidate the structure-activity relationships. Finally, we found a 3D-pharmacophore model, which is composed of a hydrophilic and a hydrophobic domain, providing valuable information for designing other novel types of integrase inhibitors.

Dynamic Pharmacophore Model Optimization: Identification of Novel HIV-1 Integrase Inhibitors

We extended the previously described dynamic pharmacophore model studies of HIV-1 integrase (IN) by considering more key residues in the active site, including Mg2+. First, we applied a Monte Carlo sampling method to map the complementary features of the IN binding surface. Two types of dynamic pharmacophore models were generated. One considers Mg2+ as part of the IN and therefore as an excluded volume, and the other treats Mg2+ as a positively charged feature, representing a new type of pharmacophore model aimed to identify compounds potentially preventing Mg2+ binding. Second, we validated the models with 385 known active (IC50 < 20 microM) and 235 (IC50 > 100 microM) inactive IN inhibitors. Third, we used the derived models to screen our small molecule database. Twenty-two structurally novel compounds were tested in an in vitro assay specific for IN, and two of them showed IC50 < or = 10 microM for strand transfer reaction.

Design, synthesis and biological evaluation of heteroaryl diketohexenoic and diketobutanoic acids as HIV-1 integrase inhibitors endowed with antiretroviral activity

Highly active anti-retroviral therapy (HAART) using reverse transcriptase (RT) and protease (PR) inhibitors and, more recently, inhibitors of the fusion is currently the best clinical approach in combating acquired immunodeficiency syndrome (AIDS), caused by infection from human immunodeficiency virus type 1 (HIV-1). However, this therapy does not completely eradicate the virus, so that resistant strains easily emerge. The above problem calls urgently for research on inhibitors of further viral targets such as integrase (IN), the third enzyme produced by HIV. Recently, our research group was engaged in studies on conformationally restrained cinnamoyl compounds related to curcumin as anti-IN agents. Compounds containing both a 3,4,5-trihydroxyphenyl group and a carboxylic acid function were potent IN inhibitors active against viral replication. More recently, a promising new class of inhibitors synthesized by Merck Company has emerged, which contain aryldiketoacid (ADK) functionality. The ADKs selectively inhibited the stand transfer (ST) step of integration and were proven to be effective IN inhibitors in vivo. Our interest in the field of IN inhibitors led us to design pyrrole and indole derivatives containing both a cinnamoyl moiety and a diketoacid group. A number of the cited derivatives were proven potent IN inhibitors, which selectively inhibited the ST step at submicromolar concentrations and were effective against virus replication in HIV-1 infected cells.

Dynamic receptor-based pharmacophore model development and its application in designing novel HIV-1 integrase inhibitors

We present here a dynamic receptor-based pharmacophore model representing the complementary features of the active site region of HIV-1 integrase (IN), which was developed from a series of representative conformations of IN. Conformations of IN were sampled through a molecular dynamics study of the catalytic domain of an IN monomer, and an ensemble of representative IN structures were collected via a probability-based representative conformer sampling method that considers both the potential energy and the structural similarity of the protein conformations. The dynamic pharmacophore model was validated by a set of 128 known inhibitors, and the results showed that over 72% of the active inhibitors (IC(50) lower than 20 microM) could be successfully identified by the dynamic model. Therefore, we screened our in-house database of commercially available compounds against this model and successfully identified a set of structurally novel IN inhibitors. Compounds 7 and 18 with IC(50)s of 8 microM and 15 microM, respectively, against the strand transfer reaction were the most potent. Moreover, 7, 8 and 20 showed a 5-fold selectivity for the strand transfer reaction over 3'-processing.

6-aryl-2,4-dioxo-5-hexenoic acids, novel integrase inhibitors active against HIV-1 multiplication in cell-based assays

A series of 6-aryl-2,4-dioxo-5-hexenoic acids, were synthesized and tested against HIV-1 in cell-based assays and against recombinant HIV-1 integrase (rIN) in enzyme assays. Compound 8a showed potent antiretroviral activity (EC(50)=1.5 microM) and significant inhibition against rIN (strand transfer: IC(50)=7.9 microM; 3'-processing: IC(50)=7.0 microM). A preliminary molecular modeling study was carried out to compare the spatial conformation of 8a with those of L-731988 (4) and 5CITEP (7) in the IN core.

Synthesis, antiviral, and anti-HIV-1 integrase activities of 3-aroyl-1,1-dioxo-1,4,2-benzodithiazines

HIV-1 integrase (IN) is an essential enzyme for effective viral replication and is an attractive target for selective blockade of viral infection. Previously, we identified a series of sulfones, sulfonamides, and mercaptosalicylhydrazides (MBSAs) as IN inhibitors with antiviral activities in cell-based assays. In an effort to optimize a series of our active site directed lead compounds, we designed and synthesized novel benzodithiazines starting from MBSAs. In contrast to all reported IN inhibitors benzodithiazines are essentially nontoxic. Significant antiviral potency was only observed at concentration exceedingly higher than that required to inhibit purified IN.

Synthesis of 1-(6-chloro-1,1-dioxo-1,4,2-benzodithiazin-3-yl)semi-carbazides and their transformation into 4-chloro-2-mercapto-N-(4,5-dihydro-5-oxo-4-phenyl-1H-1,2,4-triazol-3-yl)benzenesulfonamides as potential anticancer and anti-HIV agents

Synthesis of a series of 1-(6-chloro-1,1-dioxo-1,4,2-benzodithiazin-3-yl)semicarbazides (6-16) and 4-chloro-2-mercapto-N-(4,5-dihydro-5-oxo-4-phenyl-1H-1,2,4-triazol-3-yl)benzenesulfonamides (17-22) were reported. Compounds 7-9, 17, 19-22 were tested at the US National Cancer Institute for their in vitro anticancer and anti-HIV activities. Results of anticancer screening showed moderate activity of 21 and 22, while 19 was found to have encouraging anti-HIV activity at EC(50) = 28.8 microM.

Interfacial peptide inhibitors of HIV-1 integrase activity and dimerization

Peptides derived from the interfacial region of dimeric HIV-1 integrase were evaluated as inhibitors of integrase's 3'-endonuclease activity. Three peptides were found to be moderately potent inhibitors with IC(50) values in the low micromolar range. The mode of inhibition was probed through protein crosslinking experiments. Active interfacial peptides were found to inhibit crosslinking of the dimeric form of integrase. Interfacial peptides that were poor inhibitors had no effect on integrase crosslinking.

Metal-dependent inhibition of HIV-1 integrase

Human immunodeficiency virus type 1 integrase (HIV-1 IN) is an essential enzyme for effective viral replication. Therefore, IN inhibitors are being sought for chemotherapy against AIDS. We had previously identified a series of salicylhydrazides as potent inhibitors of IN in vitro (Neamati, N.; et al. J. Med. Chem. 1998, 41, 3202-3209.). Herein, we report the design, synthesis, and antiviral activity of three novel mercaptosalicylhydrazide (MSH) derivatives. MSHs were effective against the IN catalytic core domain and inhibited IN binding to HIV LTR DNA. They also inhibited catalytic activities of IN in IN-DNA preassembled complexes. Site-directed mutagenesis and molecular modeling studies suggest that MSHs bind to cysteine 65 and chelate Mg(2+) at the active site of HIV-1 IN. Contrary to salicylhydrazides, the MSHs are 300-fold less cytotoxic and exhibit antiviral activity. They are also active in Mg(2+)-based assays, while IN inhibition by salicylhydrazides is strictly Mn(2+)-dependent. Additionally, in target and cell-based assays, the MSHs have no detectable effect on other retroviral targets, including reverse transcriptase, protease, and virus attachment, and exhibit no detectable activity against human topoisomerases I and II at concentrations that effectively inhibit IN. These data suggest that MSHs are selective inhibitors of HIV-1 IN and may serve as leads for antiviral therapeutics.

QSAR studies of HIV-1 integrase inhibition

Compounds from a wide variety of structural classes inhibit HIV-1 integrase. However, a single unified understanding of the relationship between the structures and activities of these compounds still eludes researchers. We report herein the development of QSAR models for integrase inhibition. The genetic function approximation (GFA) was utilized to select descriptors for the development of the QSAR models. The best QSAR model derived for the complete set of 11 structural classes had a correlation coefficient (r(2)) of only 0.54 and a cross-validated correlation coefficient (q(2)) of only 0.42. This indicated that the compounds studied may differ in the exact relationship between structure and inhibition, perhaps through interactions with different subsets of amino acids in the binding pocket, or through the presence of non-overlapping binding pockets. Descriptor-based cluster analysis indicated that the 11 structural classes of integrase inhibitors studied belonged to two clusters, one consisting of five structural classes, and the other six. QSAR models for these two clusters had r(2) values of 0.79 and 0.82 and q(2) values of 0.71 and 0.74, a significant improvement over models obtained for the complete set of compounds. The two models were applied to predict the activities of compounds from the same structural classes as those used to build the models, giving r(2) values of 0.65 and 0.78. The models were also used to predict the activities of compounds shown in crystallographic or docking studies to interact near the active site metal ion. The model describing the larger cluster of structural classes was better able to reproduce the biological activities of these five structures with an average percent residual error of 7.9 compared with the 19.3% residual error for predictions from the other model. This indicated that the six structural classes comprising the larger cluster may bind near the metal ion in a fashion similar to that observed in one publicly available co-crystal structure of an inhibitor bound to HIV-1 integrase. Flexible alignment of inhibitors in the two clusters found different pharmacophores that are consistent with previously published pharmacophores developed on the basis of individual structural classes that have produced novel inhibitory compounds. Thus we expect that these two QSAR models can be used in the search for novel HIV-1 integrase inhibitors as well as to provide insight into the binding modes of such diverse chemical compounds.

Structure-based design of a novel peptide inhibitor of HIV-1 integrase: a computer modeling approach

The insertion of viral DNA into the host chromosome is an essential step in the replication of HIV-1, and is carried out by an enzyme, HIV-1 integrase (IN). Since the latter has no human cellular counterpart, it is an attractive target for antiviral drug design. Several IN inhibitors having activities in the micromolar range have been reported to date. However, no clinically useful inhibitors have yet been developed. Recently reported diketo acids represent a novel and selective class of IN inhibitors. These are the only class which appear to selectively target integrase and two of the inhibitors, L-708,906 and L-731,988, are the most potent inhibitors of preintegration complexes described to date. The X-ray crystal structure of the IN catalytic domain complexed with a diketo acid derivative inhibitor, 5CITEP, has recently been determined. Although the structure is of great value as a platform for drug design, experimental data suggest that crystal packing effects influence the observed inhibitor position. This has been confirmed by computational docking studies using the latest version (3.0) of the AutoDock program, which has been shown to give results largely consistent with available experimental data. Using AutoDock 3.0 and SYBYL6.6 we have modeled the complexes of IN with the diketo acid inhibitors so as to identify the enzyme binding site. In the quest for novel, potent and selective small molecule inhibitors, we present here a new approach to peptide inhibitor design using a, b- unsaturated (dehydro) residues, which confer a unique conformation on a peptide sequence. Based on the above models, we selected a tetrapeptide sequence containing a dehydro-Phe residue, which was found to have an open conformation as ascertained from its X-ray crystal structure. Docking results on this peptide led us to propose a modification at the C-terminal end. The modified peptide was found to dock in a similar position as the diketo acid inhibitors and was predicted to have a comparable potency.

Eigen value analysis of HIV-1 integrase inhibitors

A three-dimensional quantitative structure activity relationship using the eigen value analysis (EVA) paradigm applied to 41 HIV-1 integrase inhibitors that inhibit integrase mediated cleavage (3'-processing step) and integration (3'-strand transfer step) in vitro was performed. The training set consisted of 35 molecules from five structurally diverse classes: salicylhydrazines, lichen acids, coumarins, quinones, and thiazolothiazepines. Models derived using semiempirical (MOPAC AM1 and PM3) calculated normal-mode frequencies were compared. The predictive ability of each resultant model was evaluated using a test set comprised of six molecules belonging to a different structural class: hydrazides. Models derived using AM1 method showed considerable internal as well as external predictivity (r(2)(cv) = 0.806, r(2)(pred) = 0.761 for 3'-processing and r(2)(cv) = 0.677, r(2)(pred) = 0.591 for 3'-strand transfer).

Targeting HIV-1 integrase

Human immunodeficiency virus Type 1 (HIV-1) integrase is an essential enzyme for the obligatory integration of the viral DNA into the infected cell chromosome. As no cellular homologue of HIV integrase has been identified, this unique HIV-1 enzyme is an attractive target for the development of new therapeutics. Treatment of HIV-1 infection and AIDS currently consists of the use of combinations of HIV-1 inhibitors directed against reverse transcriptase (RT) and protease. However, their numerous side effects and the rapid emergence of drug-resistant variants limit greatly their use in many AIDS patients. In principle, inhibitors of the HIV-1 integrase should be relatively non-toxic and provide additional benefits for AIDS chemotherapy. There have been many major advances in our understanding of the molecular mechanism of the integration reaction, although some critical aspects remain obscure. Several classes of compounds have been screened and further scrutinised for their inhibitory properties against the HIV integrase; however, there are currently no useful inhibitors available clinically for the treatment of AIDS patients. This review describes the current knowledge of the biological functions of the HIV-1 integrase and reports the major classes of integrase inhibitors identified to date.

Synthesis and in vitro anticancer and anti-HIV evaluation of new 2-mercaptobenzenesulfonamides

The reactions of 6-chloro-3-methylthio-1,4,2-benzodithiazine 1,1-dioxide derivatives with appropriate diamines were investigated. Depending on the reaction conditions 2-mercaptobenzenesulfonamide derivatives or their oxidation product disulfides were obtained. All the compounds were tested at the US National Cancer Institute (Bethesda) for their in vitro anticancer and anti-HIV activities. The highest sensibility against leukemia cell lines was found for bis[2-(6-chloro-4-phenyl-3,4-dihydroquinazolin-2-yl)aminosulfonyl-5-chloro-4-(4-R2-phenylcarbamoyl)phenyl]disulfides (R2 = H or Cl). The results of anti-HIV tests displayed moderate activity of N-(pirydo[3,2-d]imidazol-2-yl)-2-mercaptobenzenesulfonamide.

Arylisothiocyanate-containing esters of caffeic acid designed as affinity ligands for HIV-1 integrase

Integrase is an enzyme found in human immunodeficiency virus, which is required for the viral life cycle, yet has no human cellular homologue. For this reason, HIV integrase (IN) has become an important target for the development of new AIDS therapeutics. Irreversible affinity ligands have proven to be valuable tools for studying a number of enzyme and protein systems, yet to date there have been no reports of such affinity ligands for the study of IN. As an initial approach toward irreversible ligand design directed against IN, we appended isothiocyanate functionality onto caffeic acid phenethyl ester (CAPE), a known HIV integrase inhibitor. The choice of isothiocyanate as the reactive functionality, was based on its demonstrated utility in the preparation of affinity ligands directed against a number of other protein targets. Several isomeric CAPE isothiocyanates were prepared to explore the enzyme topography for reactive nitrogen and sulfur nucleophiles vicinal to the enzyme-bound CAPE. The preparation of these CAPE isothiocyanates, required development of new synthetic methodology which employed phenyl thiocarbamates as latent isothiocyanates which could be unmasked near the end of the synthetic sequence. When it was observed that beta-mercaptoethanol (beta-ME), which is required to maintain the catalytic activity of soluble IN (a F185KC280S mutant), reacted with CAPE isothiocyanate functionality to form the corresponding hydroxyethylthiocarbamate, a variety of mutant IN were examined which did not require the presence of beta-ME for catalytic activity. Although in these latter enzymes, CAPE isothiocyanate functionality was presumed to be present and available for acylation by IN nucleophiles, they were equally effective against Cys to Ser mutants. One conclusion of these studies, is that upon binding of CAPE to the integrase, nitrogen or sulfur nucleophiles may not be properly situated in the vicinity of the phenethyl aryl ring to allow reaction with and covalent modification of reactive functionality, such as isothiocyanate groups. The fact that introduction of the isothiocyanate group onto various positions of the phenethyl ring or replacement of the phenyl ring with naphthyl rings, failed to significantly affect inhibitory potency, indicates a degree of insensitivity of this region of the molecule toward structural modification. These findings may be useful in future studies concerned with the development and use of HIV-1 integrase affinity ligands.

Structure-based HIV-1 integrase inhibitor design: a future perspective

The pol gene of HIV-1 encodes for three essential enzymes, protease (PR), reverse transcriptase (RT) and integrase (IN). More than 16 drugs, targeting two of these enzymes, PR and RT have been approved by the FDA. At present, there are no clinically useful agents that inhibit the third enzyme, IN. Combination chemotherapy consisting of PR and RT inhibitors has shown remarkable success in the clinic and has benefited many patients. It is thought that a combination of drugs targeting all three enzymes should further incapacitate the virus. Discovery of highly selective PR inhibitors owe their success to the recent development in structure-guided drug design. During the past several years a plethora of structures of HIV-1 PR in complex with an inhibitor have been solved by x-ray crystallography. This incredible wealth of information provided opportunities for the discovery of second and third generation inhibitors. Due to the inherent nature of IN and insufficient structural information, structure-based inhibitor design selective for IN has not kept pace. However, because of recent developments in the field such information could soon become available. In this review, emphasis is placed on inhibitors with identified or proposed drug binding sites on IN.

Identification of HIV-1 integrase inhibitors via three-dimensional database searching using ASV and HIV-1 integrases as targets

Integration of viral DNA into the host cell genome is a critical step in the life cycle of HIV. This essential reaction is catalyzed by integrase (IN) through two steps, 3'-processing and DNA strand transfer. Integrase is an attractive target for drug design because there is no known cellular analogue and integration is essential for successful replication of HIV. A computational three-dimensional (3-D) database search was used to identify novel HIV-1 integrase inhibitors. Starting from the previously identified Y3 (4-acetylamino-5-hydroxynaphthalene-2,7-disulfonic acid) binding site on the avian sarcoma virus integrase (ASV IN), a preliminary search of all compounds in the nonproprietary, open part of the National Cancer Institute 3-D database yielded a collection of 3100 compounds. A more rigorous scoring method was used to rescreen the 3100 compounds against both ASV IN and HIV-1 IN. Twenty-two of those compounds were selected for inhibition assays against HIV-1 IN. Thirteen of the 22 showed inhibitory activity against HIV-1 IN at concentrations less than 200 microM and three of them showed antiviral activities in HIV-1 infected CEM cells with effective concentrations (EC50) ranging from 0.8 to 200 microM. Analysis of the computer-generated binding modes of the active compounds to HIV-1 IN showed that simultaneous interaction with the Y3 site and the catalytic site is possible. In addition, interactions between the active compounds and the flexible loop involved in the binding of DNA by IN are indicated to occur. The structural details and the unique binding motif between the HIV-1 IN and its inhibitors identified in the present work may contribute to the future development of IN inhibitors.

Mutations in the HIV type 1 integrase of patients receiving long-term dideoxynucleoside therapy do not confer resistance to zidovudine

Metabolites of AZT can inhibit HIV-1 integrase in vitro (Mazumder A, et al., Proc Natl Acad Sci USA 1994;91:5771-5775). To determine if long-term dideoxynucleoside therapy can lead to the emergence of HIV-1 AZT-resistant variants containing mutations in the integrase, we have sequenced the proviral DNA encoding the HIV-1 integrase of nine HIV-1-infected patients at different time points during treatment. Four of the nine patients developed mutations during the course of treatment. Although most mutations occurred at nonconserved amino acids, one patient developed a mutation at codon (R166T), a residue that is conserved among all integrases from known HIV-1 isolates. This mutation was introduced in the recombinant HIV-1 integrase protein to determine if it could confer resistance to AZT in vitro. We show that the R166T integrase mutant is still proficient at carrying 3'-processing and 3' end-joining but that the enzyme is not resistant to AZT-TP. Our results suggest that it is unlikely that integrase inhibition contributes to the antiviral activity of AZT.

Retroviral integrase inhibitors year 2000: update and perspectives

HIV-1 integrase is an essential enzyme for retroviral replication and a rational target for the design of anti-AIDS drugs. A number of inhibitors have been reported in the past 8 years. This review focuses on the recent developments in the past 2 years. There are now several inhibitors with known sites of actions and antiviral activity. The challenge is to convert these leads into drugs that will selectively target integrase in vivo, and can be added to our antiviral armamentarium.

Viral entry as the primary target for the anti-HIV activity of chicoric acid and its tetra-acetyl esters

The antiviral activity of L-chicoric acid against HIV-1 has been attributed previously to the inhibition of HIV-1 integration. This conclusion was based on the inhibition of integrase activity in enzymatic assays and the isolation of a resistant HIV strain with a mutation (G140S) in the integrase gene. Here we show that the primary antiviral target of L-CA and its analogs in cell culture is viral entry. L- and D-chicoric acid (L-CA and D-CA) and their respective tetra-acetyl esters inhibit the replication of HIV-1 (III(B) and NL4.3) and HIV-2 (ROD) in MT-4 cells at a 50% effective concentration (EC(50)) ranging from 1.7 to 70.6 microM. In a time-of-addition experiment, L-CA, D-CA, L-CATA, and D-CATA were found to interfere with an early event in the viral replication cycle. Moreover, L-CA, D-CA, and their analogs did not inhibit the replication of virus strains that were resistant toward polyanionic and polycationic compounds at subtoxic concentrations. Furthermore, HIV-1 strains resistant to L-CA and D-CA were selected in the presence of L-CA and D-CA, respectively. Mutations were found in the V2, V3, and V4 loop region of the envelope glycoprotein gp120 of the L-CA and D-CA-resistant NL4.3 strains that were not present in the wild-type NL4.3 strain. Recombination of the gp120 gene of the L-CA and D-CA resistant strain in a NL4.3 wild-type molecular clone fully rescued the phenotypic resistance toward L-CA and D-CA. No significant mutations were detected in the integrase gene of the drug-resistant virus strains. Although inhibition of HIV integrase activity by L-CA and its derivatives was confirmed in an oligonucleotide-driven assay, integrase carrying the G140S mutation was inhibited to the same extent as the wild-type integrase.

Developing a dynamic pharmacophore model for HIV-1 integrase

We present the first receptor-based pharmacophore model for HIV-1 integrase. The development of "dynamic" pharmacophore models is a new method that accounts for the inherent flexibility of the active site and aims to reduce the entropic penalties associated with binding a ligand. Furthermore, this new drug discovery method overcomes the limitation of an incomplete crystal structure of the target protein. A molecular dynamics (MD) simulation describes the flexibility of the uncomplexed protein. Many conformational models of the protein are saved from the MD simulations and used in a series of multi-unit search for interacting conformers (MUSIC) simulations. MUSIC is a multiple-copy minimization method, available in the BOSS program; it is used to determine binding regions for probe molecules containing functional groups that complement the active site. All protein conformations from the MD are overlaid, and conserved binding regions for the probe molecules are identified. Those conserved binding regions define the dynamic pharmacophore model. Here, the dynamic model is compared to known inhibitors of the integrase as well as a three-point, ligand-based pharmacophore model from the literature. Also, a "static" pharmacophore model was determined in the standard fashion, using a single crystal structure. Inhibitors thought to bind in the active site of HIV-1 integrase fit the dynamic model but not the static model. Finally, we have identified a set of compounds from the Available Chemicals Directory that fit the dynamic pharmacophore model, and experimental testing of the compounds has confirmed several new inhibitors.

Structure-activity relationships and binding mode of styrylquinolines as potent inhibitors of HIV-1 integrase and replication of HIV-1 in cell culture

Our prior studies showed that polyhydroxylated styrylquinolines are potent HIV-1 integrase (IN) inhibitors that block the replication of HIV-1 in cell culture at nontoxic concentrations. To explore the mechanism of action of these inhibitors, various novel styrylquinoline derivatives were synthesized and tested against HIV-1 IN and in cell-based assays. Regarding the in vitro experiments, the structural requirements for biological activity are a carboxyl group at C-7, a hydroxyl group at C-8 in the quinoline subunit, and an ancillary phenyl ring. However the in vitro inhibitory profile tolerates deep alterations of this ring, e.g. by the introduction of various substituents or its replacement by heteroatomic nuclei. Regarding the ex vivo assays, the structural requirements for activity are more stringent than for in vitro inhibition. Thus, in addition to an o-hydroxy acid group in the quinoline, the presence of one ortho pair of substituents at C-3' and C-4', particularly two hydroxyl groups, in the ancillary phenyl ring is imperatively required for inhibitory potency. Starting from literature data and the SARs developed in this work, a putative binding mode of styrylquinoline inhibitors to HIV-1 IN was derived.

Branched oligonucleotide-intercalator conjugate forming a parallel stranded structure inhibits HIV-1 integrase

Integration of a DNA copy of the HIV-1 genome into chromosomal DNA of infected cells is a key step of viral replication. Integration is carried out by integrase, a viral protein which binds to both ends of viral DNA and catalyses reactions of the 3'-end processing and strand transfer. A 3'-3' branched oligonucleotide functionalised by the intercalator oxazolopyridocarbazole at each 5'-end was found to inhibit integration in vitro. We show that both a specific (G,A) sequence and the OPC intercalating agent contribute to the capability of the branched oligonucleotide to form a parallel stranded structure responsible for the inhibition.

Thiazolothiazepine inhibitors of HIV-1 integrase

A series of thiazolothiazepines were prepared and tested against purified human immunodeficiency virus type-1 integrase (HIV-1 IN) and viral replication. Structure-activity studies reveal that the compounds possessing the pentatomic moiety SC(O)CNC(O) with two carbonyl groups are in general more potent against purified IN than those containing only one carbonyl group. Substitution with electron-donating or -withdrawing groups did not enhance nor abolish potency against purified IN. By contrast, compounds with a naphthalene ring system showed enhanced potency, suggesting that a hydrophobic pocket in the IN active site might accommodate an aromatic system rather than a halogen. The position of sulfur in the thiazole ring appears important for potency against IN, as its replacement with an oxygen or carbon abolished activity. Further extension of the thiazole ring diminished potency. Compounds 1, 19, and 20 showed antiviral activity and inhibited IN within similar concentrations. These compounds inhibited IN when Mn(2+) or Mg(2+) was used as cofactor. None of these compounds showed detectable activities against HIV-1 reverse transcriptase, protease, virus attachment, or nucleocapsid protein zinc fingers. Therefore, thiazolothiazepines are potentially important lead compounds for development as inhibitors of IN and HIV replication.

Crystal structures of catalytic core domains of retroviral integrases and role of divalent cations in enzymatic activity

Crystal structures of the enzymatically competent catalytic domains of HIV-1 and ASV IN have been solved in the last few years. The structure of HIV-1 IN has been described only for apoenzyme and for a complex with Mg2+, whereas the structure of ASV IN has been presented as the apoenzyme, in the presence of divalent cations (Mn2+, Mg2+, Ca2+, Zn2+, and Cd2+), and with an inhibitor. A single ion of Mn2+, Mg2+, or Ca2+ interacts with the two aspartate side chains of the D,D(35)E catalytic center in octahedral coordination with four water molecules. However, two ions of Zn2+ or Cd2+ bind to the active site of IN with tetrahedral and octahedral coordination, respectively. Only small adjustments take place in the active site of ASV IN on binding of the metal cofactor(s), which are absolutely required for the activity of this enzyme. The placement of the side chains and metal ions in the active site is very similar to that observed even in distant members of this superfamily of polynucleotidyltransferases. Here the role of divalent cations in the enzymatic activity of IN and the search for inhibitors of this enzyme are discussed.

Inhibitors of human immunodeficiency virus integrase

Integration of the viral DNA into a host cell chromosome is an essential step for HIV replication and maintenance of persistent infection. Two viral factors are essential for integration: the viral DNA termini (the att sites) and IN. Accruing knowledge of the IN structure, catalytic mechanisms, and interactions with other proteins can be used to design strategies to block integration. A large number of inhibitors have been identified that can be used as leads for the development of potent and selective anti-IN drugs with antiviral activity.

Chicoric acid analogues as HIV-1 integrase inhibitors

The present study was undertaken to examine structural features of L-chicoric acid (3) which are important for potency against purified HIV-1 integrase and for reported cytoprotective effects in cell-based systems. Through a progressive series of analogues, it was shown that enantiomeric D-chicoric acid (4) retains inhibitory potency against purified integrase equal to its L-counterpart and further that removal of either one or both carboxylic functionalities results in essentially no loss of inhibitory potency. Additionally, while two caffeoyl moieties are required, attachment of caffeoyl groups to the central linking structure can be achieved via amide or mixed amide/ester linkages. More remarkable is the finding that blockage of the catechol functionality through conversion to tetraacetate esters results in almost no loss of potency, contingent on the presence of at least one carboxyl group on the central linker. Taken as a whole, the work has resulted in the identification of new integrase inhibitors which may be regarded as bis-caffeoyl derivatives of glycidic acid and amino acids such as serine and beta-aminoalanine. The present study also examined the reported ability of chicoric acid to exert cytoprotective effects in HIV-infected cells. It was demonstrated in target and cell-based assays that the chicoric acids do not significantly inhibit other targets associated with HIV-1 replication, including reverse transcription, protease function, NCp7 zinc finger function, or replication of virus from latently infected cells. In CEM cells, for both the parent chicoric acid and selected analogues, antiviral activity was observable under specific assay conditions and with high dependence on the multiplicity of viral infection. However, against HIV-1- and HIV-2-infected MT-4 cells, the chicoric acids and their tetraacetylated esters exhibited antiviral activity (50% effective concentration (EC50) ranging from 1.7 to 20 microM and 50% inhibitory concentration (IC50) ranging from 40 to 60 microM).

Identification of HIV-1 integrase inhibitors based on a four-point pharmacophore

The rapid emergence of human immunodeficiency virus (HIV) strains resistant to available drugs implies that effective treatment modalities will require the use of a combination of drugs targeting different sites of the HIV life cycle. Because the virus cannot replicate without integration into a host chromosome, HIV-1 integrase (IN) is an attractive therapeutic target. Thus, an effective IN inhibitor should provide additional benefit in combination chemotherapy. A four-point pharmacophore has been identified based on the structures of quinalizarin and purpurin, which were found to be potent IN inhibitors using both a preintegration complex assay and a purified enzyme assay in vitro. Searching with this four-point pharmacophore in the 'open' part of the National Cancer Institute three-dimensional structure database produced 234 compounds containing the pharmacophore. Sixty of these compounds were tested for their inhibitory activity against IN using the purified enzyme; 19 were found to be active against IN with IC50 values of less than 100 microM, among which 10 had IC50 values of less than 10 microM. These inhibitors can further serve as leads, and studies are in progress to design novel inhibitors based on the results presented in this study.

Salicylhydrazine-containing inhibitors of HIV-1 integrase: implication for a selective chelation in the integrase active site

In previous studies we identified N,N'-bis(salicylhydrazine) (1) as a lead compound against purified recombinant HIV-1 integrase. We have now expanded upon these earlier observations and tested 45 novel hydrazides. Among the compounds tested, 11 derivatives exhibited 50% inhibitory concentrations (IC50) of less than 3 microM. A common feature for activity among these inhibitors is the hydroxyl group of the salicyl moiety. Although the active inhibitors must contain this hydroxyl group, other structural modifications can also influence potency. Removal of this hydroxyl group or replacement with an amino, bromo, fluoro, carboxylic acid, or ethyl ether totally abolished potency against integrase. Several asymmetric structures exhibited similar potency to the symmetric lead inhibitor 1. The superimposition of the lowest-energy conformations upon one another revealed three sites whose properties appear important for ligand binding. Site A is composed of the 2-hydroxyphenyl, the alpha-keto, and the hydrazine moieties in a planar conformation. We propose that this site could interact with HIV-1 integrase by chelation of the metal in the integrase active site as inhibition of HIV-1 integrase catalytic activity and DNA binding were strictly Mn2+-dependent. The hydrophobic sites B and C are probably responsible for complementarity of molecular shape between ligand and receptor. Our data indicate that only those compounds which possessed sites A, B, and C in a linear orientation were potent inhibitors of HIV-1 integrase. Although all the active inhibitors possessed considerable cytotoxicity and no apparent antiviral activity in CEM cells, the study presents useful information regarding ligand interaction with HIV-1 integrase protein.

Highly potent synthetic polyamides, bisdistamycins, and lexitropsins as inhibitors of human immunodeficiency virus type 1 integrase

Alignment of the available human immunodeficiency virus type 1 (HIV-1) viral DNA termini [U5 and U3 long terminal repeats (LTRs)] shows a high degree of conservation and the presence of a stretch of five or six consecutive adenine and thymine (AT) sequences approximately 10 nucleotides away from each LTR end. A series of AT-selective minor-groove binders, including distamycin and bisdistamycins, bisnetropsins, novel lexitropsins, and the classic monomeric DNA binders Hoechst 33258, 4'-diamino-2-phenylindole, pentamidine, berenil, spermine, and spermidine, were tested for their inhibitory activities against HIV-1 integrase (IN). Although netropsin, distamycin, and all other monomeric DNA binders showed weak activities in the range of 50-200 microM, some of the polyamides, bisdistamycins, and lexitropsins were remarkably active at nanomolar concentrations. Bisdistamycins were 200 times less potent when the conserved AAAAT stretch present in the U5 LTR was replaced with GGGGG, consistent with the preferred binding of these drugs to AT sequences. DNase I footprinting of the U5 LTR further demonstrated the selectivity of these bisdistamycins for the conserved AT sequence. The tested compounds were more potent in Mg+2 than in Mn+2 and inhibited IN50-212 deletion mutant in disintegration assays and the formation of IN/DNA complexes. The lexitropsins also were active against HIV-2 IN. Some of the synthetic polyamides exhibited significant antiviral activity. Taken together, these data suggest that selective targeting of the U5 and U3 ends of the HIV-1 LTRs can inhibit IN function. Polyamides might represent new leads for the development of antiviral agents against acquired immune deficiency syndrome.

Inhibition of HIV integrase by novel nucleotides bearing tricyclic bases

5'-Monophosphates of several novel dideoxynucleosides bearing tricyclic nucleobases were synthesized. Both linear and angular ring-extended analogs of isomeric dideoxyadenosine 5'-monophosphate were discovered to have moderate to good inhibition of the viral-encoded enzyme, HIV integrase. The results suggest that the nucleotide binding site of HIV integrase can accommodate major modifications in the nucleobase, which is in stark contrast to the nucleotide binding site on HIV reverse transcriptase.

Structure of the catalytic domain of avian sarcoma virus integrase with a bound HIV-1 integrase-targeted inhibitor

The x-ray structures of an inhibitor complex of the catalytic core domain of avian sarcoma virus integrase (ASV IN) were solved at 1.9- to 2.0-A resolution at two pH values, with and without Mn2+ cations. This inhibitor (Y-3), originally identified in a screen for inhibitors of the catalytic activity of HIV type 1 integrase (HIV-1 IN), was found in the present study to be active against ASV IN as well as HIV-1 IN. The Y-3 molecule is located in close proximity to the enzyme active site, interacts with the flexible loop, alters loop conformation, and affects the conformations of active site residues. As crystallized, a Y-3 molecule stacks against its symmetry-related mate. Preincubation of IN with metal cations does not prevent inhibition, and Y-3 binding does not prevent binding of divalent cations to IN. Three compounds chemically related to Y-3 also were investigated, but no binding was observed in the crystals. Our results identify the structural elements of the inhibitor that likely determine its binding properties.

Identification of a nucleotide binding site in HIV-1 integrase

HIV-1 integrase is essential for viral replication and can be inhibited by antiviral nucleotides. Photoaffinity labeling with the 3'-azido-3'-deoxythymidine (AZT) analog 3',5-diazido-2', 3'-dideoxyuridine 5'-monophosphate (5N3-AZTMP) and proteolytic mapping identified the amino acid 153-167 region of integrase as the site of photocrosslinking. Docking of 5N3-AZTMP revealed the possibility for strong hydrogen bonds between the inhibitor and lysines 156, 159, and 160 of the enzyme. Mutation of these residues reduced photocrosslinking selectively. This report elucidates the binding site of a nucleotide inhibitor of HIV-1 integrase, and possibly a component of the enzyme polynucleotide binding site.

Potent inhibitors of human immunodeficiency virus type 1 integrase: identification of a novel four-point pharmacophore and tetracyclines as novel inhibitors

A four-point pharmacophore was constructed from energy-minimized structures of chicoric acid and dicaffeoylquinic acid. The search of 206,876 structures in the National Cancer Institute 3D database yielded 179 compounds that contain this pharmacophore. Thirty-nine of these compounds were tested in an in vitro assay specific for human immunodeficiency virus type 1 integrase (IN). Each retrieved structure was fit to the pharmacophore, and the conformation that afforded the best fit was identified. Twenty of the 39 compounds tested exhibited IC50 values of < 20 microM. Among the most potent inhibitors, tetracyclines emerged as a new class of inhibitors. Although the parent tetracycline exhibited marginal potency against purified IN, all substituted tetracyclines tested showed 5-100-fold increased potency. Disintegration assays with truncated IN mutants indicated that tetracyclines inhibit the IN catalytic core domain. To investigate whether chelation of divalent metals is implicated in differential potency of tetracyclines, enzyme assays were performed in the presence of both Mn2+ or Mg2+; no significance difference in potency was observed. Rolitetracycline inhibited IN/DNA complex formation in the presence of EDTA, which suggests that inhibition was metal independent. Rolitetracycline reversed DNA binding of IN after the complex was allowed to form before the addition of drug. Selectivity of tetracyclines was also examined in an assay specific for topoisomerase I, and none of the tetracyclines tested induced topoisomerase I-mediated cleavable complex or inhibited camptothecin-induced cleavable complex. Remarkable potency against the IN in the absence of divalent metals and the core enzyme coupled with water solubility makes tetracyclines potential candidates for X-ray crystal structure determination with IN.