Customizing lipases for biocatalysis: a survey of chemical, physical and molecular biological approaches

Enhancing biocatalyst performance through immobilization of lipase (Eversa® Transform 2.0) on hybrid amine-epoxy core-shell magnetic nanoparticles

Magnetic nanoparticles were functionalized with polyethylenimine (PEI) and activated with epoxy. This support was used to immobilize Lipase (Eversa® Transform 2.0) (EVS), optimization using the Taguchi method. XRF, SEM, TEM, XRD, FTIR, TGA, and VSM performed the characterizations. The optimal conditions were immobilization yield (I.Y.) of 95.04 ± 0.79 %, time of 15 h, ionic load of 95 mM, protein load of 5 mg/g, and temperature of 25 °C. The maximum loading capacity was 25 mg/g, and its stability in 60 days of storage showed a negligible loss of only 9.53 % of its activity. The biocatalyst demonstrated better stability at varying temperatures than free EVS, maintaining 28 % of its activity at 70 °C. It was feasible to esterify free fatty acids (FFA) from babassu oil with the best reaction of 97.91 % and ten cycles having an efficiency above 50 %. The esterification of produced biolubricant was confirmed by NMR, and it displayed kinematic viscosity and density of 6.052 mm2/s and 0.832 g/cm3, respectively, at 40 °C. The in-silico study showed a binding affinity of -5.8 kcal/mol between EVS and oleic acid, suggesting a stable substrate-lipase combination suitable for esterification.

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

Metagenomic discovery of lipases with predicted structural similarity to Candida antarctica lipase B

Here we employed sequence-based and structure-based screening for prospecting lipases that have structural homolog to Candida antarctica lipase B (CalB). CalB, a widely used biocatalyst, was used as structural template reference because of its enzymatic properties. Structural homolog could aid in the discovery of novel wild-type enzymes with desirable features and serve as a scaffold for further biocatalyst design. The available metagenomic data isolated from various environments was leveraged as a source for bioprospecting. We identified two bacteria lipases that showed high structural similarity to CalB with <40% sequence identity. Partial purification was conducted. In comparison to CalB, the enzymatic characteristics of two potential lipases were examined. A candidate exhibited optimal pH of 8 and temperature of 50°C similar to CalB. The second lipase candidate demonstrated an optimal pH of 8 and a higher optimal temperature of 55°C. Notably, this candidate sustained considerable activity at extreme conditions, maintaining high activity at 70°C or pH 9, contrasting with the diminished activity of CalB under similar conditions. Further comprehensive experimentation is warranted to uncover and exploit these novel enzymatic properties for practical biotechnological purposes.

Design of oscillatory dynamics in numerical simulations of compartment-based enzyme systems

Enzymatic reactions that yield non-neutral products are known to involve feedback due to the bell-shaped pH-rate curve of the enzyme. Compartmentalizing the reaction has been shown to lead to transport-driven oscillations in theory; however, there have been few reproducible experimental examples. Our objective was to determine how the conditions could be optimized to achieve pH oscillations. We employed numerical simulations to investigate the hydrolysis of ethyl acetate in a confined esterase enzyme system, examining the influence of key factors on its behavior. Specific parameter ranges that lead to bistability and self-sustained pH oscillations and the importance of fast base transport for oscillations in this acid-producing system are highlighted. Suggestions are made to expand the parameter space for the occurrence of oscillations, including modifying the maximum of the enzyme pH-rate curve and increasing the negative feedback rate. This research not only sheds light on the programmable nature of enzyme-driven pH regulation but also furthers knowledge on the optimal design of such feedback systems for experimentalists.

Biocatalytic production of biolubricants: Strategies, problems and future trends

The increasing worries by the inadequate use of energy and the preservation of nature are promoting an increasing interest in the production of biolubricants. After discussing the necessity of producing biolubricants, this review focuses on the production of these interesting molecules through the use of lipases, discussing the different possibilities (esterification of free fatty acids, hydroesterification or transesterification of oils and fats, transesterification of biodiesel with more adequate alcohols, estolides production, modification of fatty acids). The utilization of discarded substrates has special interest due to the double positive ecological impact (e.g., oil distillated, overused oils). Pros and cons of all these possibilities, together with general considerations to optimize the different processes will be outlined. Some possibilities to overcome some of the problems detected in the production of these interesting compounds will be also discussed.

Bicyclo[3.2.0]carbocyclic Molecules and Redox Biotransformations: The Evolution of Closed-Loop Artificial Linear Biocatalytic Cascades and Related Redox-Neutral Systems

The role of cofactor recycling in determining the efficiency of artificial biocatalytic cascades has become paramount in recent years. Closed-loop cofactor recycling, which initially emerged in the 1990s, has made a valuable contribution to the development of this aspect of biotechnology. However, the evolution of redox-neutral closed-loop cofactor recycling has a longer history that has been integrally linked to the enzymology of oxy-functionalised bicyclo[3.2.0]carbocyclic molecule metabolism throughout. This review traces that relevant history from the mid-1960s to current times.

Degradation of ochratoxins A and B by lipases: A kinetic study unraveled by molecular modeling

Mycotoxins are toxic substances produced by fungi and, frequently, different mycotoxins cooccur in food commodities. Ochratoxin A (OTA) and Ochratoxin B (OTB) may co-occur in a variety of foods, like red wines and wheat, presenting a significant risk of population exposure. In this study, we investigated the potential of five lipases (Candida rugosa Lipase, Candida antarctica B Lipase, Thermomyces lanuginosus Lipase, Amano Lipase A from Aspergillus niger (ANL) and Porcine Pancreas Lipase (PPL)) to hydrolyze OTA and OTB into non-hazardous products. Only ANL and PPL degraded both substrates, however, with varying degrees of efficiency. PPL completely degraded OTB (9 h), but only 43% of OTA (25 h). Molecular simulations indicated a high binding energy of OTA to PPL, that can be explained by the impact of the chlorine group, impairing hydrolysis. ANL was able to completely degrade both mycotoxins, OTA in 3 h and OTB in 10 h. The ANL enzyme showed also high specificity to OTA, however, the activity of this enzyme is not affected by chlorine and hydrolyzes OTA faster than OTB. These two enzymes were found to be able to detoxify co-occurring ochratoxins A and B, making isolated enzymes an alternative to the direct use of microorganisms for mycotoxin mitigation in food.

Tuning Selectivity in CalA Lipase: Beyond Tunnel Engineering

Engineering studies of Candida (Pseudozyma) antarctica lipase A (CalA) have demonstrated the potential of this enzyme in the selective hydrolysis of fatty acid esters of different chain lengths. CalA has been shown to bind substrates preferentially through an acyl-chain binding tunnel accessed via the hydrolytic active site; it has also been shown that selectivity for substrates of longer or shorter chain length can be tuned, for instance by modulating steric hindrance within the tunnel. Here we demonstrate that, whereas the tunnel region is certainly of paramount importance for substrate recognition, residues in distal regions of the enzyme can also modulate substrate selectivity. To this end, we investigate variants that carry one or more substitutions within the substrate tunnel as well as in distal regions. Combining experimental determination of the substrate selectivity using natural and synthetic substrates with computational characterization of protein dynamics and of tunnels, we deconvolute the effect of key substitutions and demonstrate that epistatic interactions contribute to procuring selectivity toward either long-chain or short/medium-chain fatty acid esters. We demonstrate that various mechanisms contribute to the diverse selectivity profiles, ranging from reshaping tunnel morphology and tunnel stabilization to obstructing the main substrate-binding tunnel, highlighting the dynamic nature of the substrate-binding region. This work provides important insights into the versatility of this robust lipase toward diverse applications.

Structural features, temperature adaptation and industrial applications of microbial lipases from psychrophilic, mesophilic and thermophilic origins

Microbial lipases are very prominent biocatalysts because of their ability to catalyze a wide variety of reactions in aqueous and non-aqueous media. Here microbial lipases from different origins (psychrophiles, mesophiles, and thermophiles) have been reviewed. This review emphasizes an update of structural diversity in temperature adaptation and industrial applications, of psychrophilic, mesophilic, and thermophilic lipases. The microbial origins of lipases are logically dynamic, proficient, and also have an extensive range of industrial uses with the manufacturing of altered molecules. It is therefore of interest to understand the molecular mechanisms of adaptation to temperature in occurring lipases. However, lipases from extremophiles (psychrophiles, and thermophiles) are widely used to design biotransformation reactions with higher yields, fewer byproducts, or useful side products and have been predicted to catalyze those reactions also, which otherwise are not possible with the mesophilic lipases. Lipases as a multipurpose biological catalyst have given a favorable vision in meeting the needs of several industries such as biodiesel, foods, and drinks, leather, textile, detergents, pharmaceuticals, and medicals.

Novel Glucosylimidazolium Ionic-Liquid-Supported Novozym 435 Catalysts - A Proof of Concept for an Acrylation Reaction

A series of novel ionic liquids based on glucose was synthesized in high yields in simple two or three-step reaction procedures. These carbohydrate-based ionic liquids were studied and compared to commercially available imidazolium-based ionic liquids as supports for Novozym 435 in the acrylation of n-butanol. A direct correlation between the availability of hydroxy groups and the overall activity as well as an enhanced recyclability of the biocatalyst has been found for the glucose-based ionic liquids.

Impact of immobilization strategies on the activity and recyclability of lipases in nanomagnetic supports

The use of enzymes immobilized on nanomagnetic supports has produced surprising results in catalysis, mainly due to the increase in surface area and the potential for recovery and reuse. However, the meticulous control of the process and difficulties in reproducibility have made industrial-scale applications unfeasible. Furthermore, the role of conjugation strategies in the catalytic activity and recycling of catalysts is unclear. Therefore, the objective of this study was to compare the conjugation of enzymes on nanomagnetic supports through physical adsorption (naked) or covalent bonding with mercaptopropyltrimethoxysilane (MPTS) and aminopropyltriethoxysilane (APTS) ligands. The free lipase obtained from Rhizomucor miehei was used as a model enzyme. Total protein and enzyme activity were determined using spectrophotometry (UV–Vis) and the p-nitrophenyl palmitate (p-NPP) hydrolysis method. The results indicated that a more significant enzyme surface loading does not always mean better immobilization success. The physical adsorption binding strategy had higher surface loading and low catalytic activity. On the other hand, covalent coupling with free NH2 had an excellent catalytic activity with very low surface loading. Finally, we show that recyclability can be improved with conjugation mediated by disulfide bonds. The findings presented here are essential for developing nanoconjugates with high enzymatic activity, which can guarantee the success of several industrial applications.

Differences of Enzymatic Activity During Composting and Vermicomposting of Sewage Sludge Mixed With Straw Pellets

The study aims were focused on profiling eight hydrolytic enzymes by fluorescence method using a multifunctional modular reader and studying the proportion of basic microorganism groups during composting and vermicomposting of sewage sludge mixed with straw pellets in several proportions (0, 25, 50, 75, and 100%). The greatest decrease in enzymatic activity occurred in the first half of composting and vermicomposting. After 4 months of these processes, the least enzymatic activity was observed in the sludge with 50% and also 25% straw addition, indicating that straw is an important means for the rapid production of mature compost from sewage sludge. Enzymatic activity was usually less in the presence of earthworms than in the control treatment because some processes took place in the digestive tract of the earthworm. For the same reason, we observed reduced enzyme activity during fresh feedstock vermicomposting than precomposted material. The final vermicompost from fresh feedstocks exhibited less microbial biomass, and few fungi and G- bacteria compared to precomposted feedstock. The enzymatic activity during composting and vermicomposting of sewage sludge and their mixtures stabilized at the following values: β-D-glucosidase-50 μmol MUFG/h/g dw, acid phosphatase-200 μmol MUFP/h/g dw, arylsulphatase-10 μmol MUFS/h/g dw, lipase-1,000 μmol MUFY/h/g dw, chitinase-50 μmol MUFN/h/g dw, cellobiohydrolase-20 μmol MUFC/h/g dw, alanine aminopeptidase-50 μmol AMCA/h/g dw, and leucine aminopeptidase-50 μmol AMCL/h/g dw. At these and lesser values, these final products can be considered mature and stable.

The Application of Biocatalysis in the Preparation and Resolution of Morita-Baylis-Hillman Adducts and Their Derivatives

The Morita-Baylis-Hillman (MBH) reaction affords highly functionalised allylic alcohols containing a new stereogenic centre. These MBH adducts are very versatile and have been transformed into a large range of products, some of which have medicinal potential. Several examples of asymmetric syntheses of MBH adducts have been reported, although a generally applicable method remains to be developed. Biocatalytic approaches for the synthesis and enzymatic kinetic resolution of MBH adducts have been reported, and are discussed in detail in this review. Enzymes able to catalyse the asymmetric MBH reaction have been identified, but selectivity and efficiency have generally been low. Lipases, esterases and nitrile-converting enzymes have all been successfully applied in the resolution of MBH adducts, with excellent selectivity being realised in most cases.

Draft Genome Sequences of the Lipid-Degrading Bacteria Moritella sp. Strains F1 and F3, Isolated from Mesopelagic Seawater from the Sagami Trough, in Japan

Moritella sp. strains F1 and F3 are lipid-degrading bacteria that were isolated from intermediate water from the Sagami Trough, in Japan. We present the draft genome sequences of these two strains, which have 4,983,334 bp and 4,967,310 bp, respectively.

Ile258Met mutation of Brucella melitensis 7α-hydroxysteroid dehydrogenase significantly enhances catalytic efficiency, cofactor affinity, and thermostability

NAD(H)-dependent 7α-hydroxysteroid dehydrogenase catalyzes the oxidation of chenodeoxycholic acid to 7-oxolithocholic acid. Here, we designed mutations of Ile258 adjacent to the catalytic pocket of Brucella melitensis 7α-hydroxysteroid dehydrogenase. The I258M variant gave a 4.7-fold higher k_cat, but 4.5-fold lower K_M, compared with the wild type, resulting in a 21.8-fold higher k_cat/K_M value for chenodeoxycholic acid oxidation. It presented a 2.0-fold lower K_M value with NAD⁺, suggesting stronger binding to the cofactor. I258M produced 7-oxolithocholic acid in the highest yield of 92.3% in 2 h, whereas the wild-type gave 88.4% in 12 h. The I258M mutation increased the half-life from 20.8 to 31.1 h at 30 °C. Molecular dynamics simulations indicated increased interactions and a modified tunnel improved the catalytic efficiency, and enhanced rigidity at three regions around the ligand-binding pocket increased the enzyme thermostability. This is the first report about significantly improved catalytic efficiency, cofactor affinity, and enzyme thermostability through single site-mutation of Brucella melitensis 7α-hydroxysteroid dehydrogenase. KEY POINTS: • Sequence and structure analysis guided the site mutation design. • Thermostability, catalytic efficiency and 7-oxo-LCA production were determined. • MD simulation was performed to indicate the improvement by I258M mutation.

Extraction and reimmobilization of used commercial lipase from industrial waste

In industrial application, immobilized lipase are typically not reused and served as industrial waste after a certain process is completed. The capacity on the reusability of the spent lipase is not well studied. This current study embarks on reusing the remaining lipase from the spent immobilized enzyme. Active lipases were recovered using a simple reverse micellar extraction (RME). RME is the extraction process of targeted biomolecules using an organic solvent and a surfactant. This method was the first attempt reported on the recovery of the lipase from the used immobilized lipase. RME of the spent lipase was done using the nonionic Triton X-100 surfactant and toluene. Various parameters were optimized to maximize the lipase recovery from the used immobilized lipase. The optimum forward extraction condition was 0.075 M KCl, and backward conditions were at 0.15 M Triton X-100/toluene (pH 6, 2 M KCl) with recovery of 66%. The extracted lipase was immobilized via simple adsorption into the ethanol pretreated carrier. The optimum conditions of immobilization resulted in 96% of the extracted lipase was reimmobilized. The reimmobilized lipase was incubated for 20 h in pH 6 buffer at 50 °C of water bath shaker. The reimmobilized lipase still had 27% residual activity after 18 h of incubation, which higher thermal stability compared to the free lipase. In conclusion, the free lipase was successfully extracted from the spent immobilized lipase and reimmobilized into the new support. It exhibited high thermal stability, and the reusability of the spent lipase will promote continued use of industrial lipase and reduce the cost of the manufacturing process.

New lipase-producing Streptomyces isolated from halo-alkaline habitat in Wadi El Natrun: polyphasic identification and statistical optimization of enzyme production

Background

Bioprospecting lipase producers in non-conventional habitats are the way to find special enzymes of diverse applications. Halo-alkaline marshes in Wadi El Natrun in Egypt are some of the most stable ecological systems in the world, and because of the double extremities of alkalinity and salinity, they harbor individual microbes capable of adapting stress conditions.

Results

Eight strains were recovered from the coastline soil of Al-Beida Lake in Wadi El Natrun and have been tested for lipase production. Among the eight isolates, the strain SBLWN_MH2 was the most active producer of lipase (7.5 U/ml). The crude SBLWN_MH2 lipase showed activity over a wide pH range (3.5 to 13) with an optimum pH at 10.5, and it was able to show more than 75% of its highest activity at pH elevated up to 13. The identification using phenotypic and genotypic methods strongly indicated that the strain SBLWN_MH2 belonged to the genus Streptomyces with a similarity of 99%. Thus, it has been given the suggested name Streptomyces sp. SBLWN_MH2 (MG593538). SBLWN_MH2 produced extracellular lipase in modified starch casein medium supplemented with different oils or Tween-80, and the potential production rate has been attained in the case of linseed oil after 3 days. Further experiments have been carried out to optimize medium composition through Box-Behnken design and response surface methodology, and it was possible to achieve more than 3.5-fold increase in lipase production.

Conclusions

The present study indicates that Streptomyces sp. SBLWN_MH2 is a potential lipase producer and could be fruitfully employed in the large-scale production of highly alkaline lipase.

Lipase-Catalyzed Kinetic Resolution of Alcohols as Intermediates for the Synthesis of Heart Rate Reducing Agent Ivabradine

Ivabradine (Corlanor®), is a chiral benzocycloalkane currently employed and commercialized for the treatment of chronic stable angina pectoris and for the reduction in sinus tachycardia. The eutomer (S)-ivabradine is usually produced via chiral resolution of intermediates, by employing enantiopure auxiliary molecules or through preparative chiral HPLC separations. Recently, more sustainable biocatalytic approaches have been reported in literature for the preparation of the chiral amine precursor. In this work, we report on a novel biocatalyzed pathway, via a resolution study of a key alcohol intermediate used as a precursor of the chiral amine. After screening several enzymatic reaction conditions, employing different lipases and esterases both for the esterification and hydrolysis reactions, the best result was achieved with Pseudomonas cepacia Lipase and the final product was obtained in up to 96:4 enantiomeric ratio (e.r.) of an ivabradine alcohol precursor. This enantiomer was then efficiently converted into the desired amine in a facile three step synthetic sequence.

Microbial lipase: a new approach for a heterogeneous biocatalyst

Lipases are enzymes employed in several industrial process and their applicability can be increased if these biocatalysts are in the immobilize form. The objective of this work was to study the immobilization of lipase produced by submerged cultivation of Aspergillus sp. by hydrophobic interaction, evaluating its stability and reuse capacity. The immobilization process on octyl-sepharose (C₈) and octadecyl-sepabeads (C₁₈) carriers was possible after the removal of oil excess presented in the fermented broth. The results showed that the enzyme was isolated and concentrated in octyl-sepharose with 22% of the initial activity. To increase the amount of enzyme adsorbed on the carrier, 4 immobilization cycles were performed in a row, on the same carrier, with a final immobilization yield of 151.32% and an increase in the specific activity of 136%. The activity test with immobilized lipase showed that the immobilized enzyme maintained 75% of the initial activity after 20 cycles.

The Importance of Ionic Liquids in the Modification of Starch and Processing of Starch-Based Materials

The main applications of ionic liquids in chemistry and material research on one of the most important natural polymers—starch—are presented in this review. A brief characterization of ionic liquids and the advantages and disadvantages of using them in the modification and processing of polysaccharides is presented. The latest reports on the use of various ionic liquids as solvents or co-solvents; as media for synthesizing starch derivatives in oxidation, etherification, esterification, and transesterification, with particular emphasis on biocatalyzed reactions; and as plasticizers or compatibilizers in the processing of starch-based polymers have been investigated. The current trends, possibilities, and limitations of using this type of compound for the production of functional starch-based materials are presented.

Free and Substrate-Immobilised Lipases from Fusarium verticillioides P24 as a Biocatalyst for Hydrolysis and Transesterification Reactions

Fungal enzymes are widely used in technological processes and have some interesting features to be applied in a variety of biosynthetic courses. Here, free and substrate-immobilised lipases from Fusarium verticillioides P24 were obtained by solid-state fermentation using wheat bran as substrate and fungal carrier. Based on their hydrolytic and transesterification activities, the lipases were characterised as pH-dependent in both reactions, with higher substrate conversion in an alkaline environment. Thermally, the lipases performed well from 30 to 45 °C, being more stable in mild conditions. Organic solvents significantly influenced the lipase selectivity using different vegetable oils as fatty acid source. Omega(ω)-3 production in n-hexane achieved 45% using canola oil, against ≈ 18% in cyclohexane. However, ω-6 production was preferably produced for both solvents using linseed oil with significant alterations in the yield (≈ 79% and 49% for n-hexane and cyclohexane, respectively). Moreover, the greatest enzyme selectivity for ω-6 led us to suppose a lipase preference for the Sn1 position of the triacylglycerol. Lastly, a transesterification reaction was performed, achieving 90% of ester conversion in 72 h. This study reports the characterisation and use of free and substrate-immobilised lipases from Fusarium verticillioides P24 as an economic and efficient method for the first time.

The Immobilization of Lipases on Porous Support by Adsorption and Hydrophobic Interaction Method

Four major enzymes commonly used in the market are lipases, proteases, amylases, and cellulases. For instance, in both academic and industrial levels, microbial lipases have been well studied for industrial and biotechnological applications compared to others. Immobilization is done to minimize the cost. The improvement of enzyme properties enables the reusability of enzymes and facilitates enzymes used in a continuous process. Immobilized enzymes are enzymes physically confined in a particularly defined region with retention to their catalytic activities. Immobilized enzymes can be used repeatedly compared to free enzymes, which are unable to catalyze reactions continuously in the system. Immobilization also provides a higher pH value and thermal stability for enzymes toward synthesis. The main parameter influencing the immobilization is the support used to immobilize the enzyme. The support should have a large surface area, high rigidity, suitable shape and particle size, reusability, and resistance to microbial attachment, which will enhance the stability of the enzyme. The diffusion of the substrate in the carrier is more favorable on hydrophobic supports instead of hydrophilic supports. The methods used for enzyme immobilization also play a crucial role in immobilization performance. The combination of immobilization methods will increase the binding force between enzymes and the support, thus reducing the leakage of the enzymes from the support. The adsorption of lipase on a hydrophobic support causes the interfacial activation of lipase during immobilization. The adsorption method also causes less or no change in enzyme conformation, especially on the active site of the enzyme. Thus, this method is the most used in the immobilization process for industrial applications.

A Review on Bio-Based Catalysts (Immobilized Enzymes) Used for Biodiesel Production

The continuous increase of the world’s population results in an increased demand for energy drastically from the industrial and domestic sectors as well. Moreover, the current public awareness regarding issues such as pollution and overuse of petroleum fuel has resulted in the development of research approaches concerning alternative renewable energy sources. Amongst the various options for renewable energies used in transportation systems, biodiesel is considered the most suitable replacement for fossil-based diesel. In what concerns the industrial application for biodiesel production, homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and hydrochloric acid are usually selected, but their removal after reaction could prove to be rather complex and sometimes polluting, resulting in increases on the production costs. Therefore, there is an open field for research on new catalysts regarding biodiesel production, which can comprise heterogeneous catalysts. Apart from that, there are other alternatives to these chemical catalysts. Enzymatic catalysts have also been used in biodiesel production by employing lipases as biocatalysts. For economic reasons, and reusability and recycling, the lipases urged to be immobilized on suitable supports, thus the concept of heterogeneous biocatalysis comes in existence. Just like other heterogeneous catalytic materials, this one also presents similar issues with inefficiency and mass-transfer limitations. A solution to overcome the said limitations can be to consider the use of nanostructures to support enzyme immobilization, thus obtaining new heterogeneous biocatalysts. This review mainly focuses on the application of enzymatic catalysts as well as nano(bio)catalysts in transesterification reaction and their multiple methods of synthesis.

Enzymes to unravel bioproducts architecture

Enzymes are essential and ubiquitous biocatalysts involved in various metabolic pathways and used in many industrial processes. Here, we reframe enzymes not just as biocatalysts transforming bioproducts but also as sensitive probes for exploring the structure and composition of complex bioproducts, like meat tissue, dairy products and plant materials, in both food and non-food bioprocesses. This review details the global strategy and presents the most recent investigations to prepare and use enzymes as relevant probes, with a focus on glycoside-hydrolases involved in plant deconstruction and proteases and lipases involved in food digestion. First, to expand the enzyme repertoire to fit bioproduct complexity, novel enzymes are mined from biodiversity and can be artificially engineered. Enzymes are further characterized by exploring sequence/structure/dynamics/function relationships together with the environmental factors influencing enzyme interactions with their substrates. Then, the most advanced experimental and theoretical approaches developed for exploring bioproducts at various scales (from nanometer to millimeter) using active and inactive enzymes as probes are illustrated. Overall, combining multimodal and multiscale approaches brings a better understanding of native-form or transformed bioproduct architecture and composition, and paves the way to mainstream the use of enzymes as probes.

Fatty Acid Hydratases: Versatile Catalysts to Access Hydroxy Fatty Acids in Efficient Syntheses of Industrial Interest

The utilization of hydroxy fatty acids has gained more and more attention due to its applicability in many industrial building blocks that require it, for example, polymers or fragrances. Furthermore, hydroxy fatty acids are accessible from biorenewables, thus contributing to a more sustainable raw material basis for industrial chemicals. Therefore, a range of investigations were done on fatty acid hydratases (FAHs), since these enzymes catalyze the addition of water to an unsaturated fatty acid, thus providing an elegant route towards hydroxy-substituted fatty acids. Besides the discovery and characterization of fatty acid hydratases (FAHs), the design and optimization of syntheses with these enzymes, the implementation in elaborate cascades, and the improvement of these biocatalysts, by way of mutation in terms of the substrate scope, has been investigated. This mini-review focuses on the research done on process development using fatty acid hydratases as a catalyst. It is notable that biotransformations, running at impressive substrate loadings of up to 280 g L−1, have been realized. A further topic of this mini-review is the implementation of fatty acid hydratases in cascade reactions. In such cascades, fatty acid hydratases were, in particular, combined with alcohol dehydrogenases (ADH), Baeyer-Villiger monooxygenases (BVMO), transaminases (TA) and hydrolases, thus enabling access to a broad variety of molecules that are of industrial interest.

Covalent Immobilization of Candida rugosa Lipase on Epichlorohydrin-Coated Magnetite Nanoparticles: Enantioselective Hydrolysis Studies of Some Racemic Esters and HPLC Analysis

In this study, a new biocatalyst was prepared by immobilizing Candida rugosa lipase epichlorohydrin-functionalized onto the surface of the nanoparticles. Magnetite nanoparticles were obtained by chemical co-precipitation method of Fe²⁺ and Fe³⁺, and then the prepared uncoated and coated nanoparticles were characterized by XRD, FT-IR and TGA. Lipase was covalently attached to activated nanoparticles. The catalytic properties of free and immobilized lipases were determined. It was found that the optimum temperature for free and immobilized lipases was 30 °C and 35 °C, respectively. The optimum pH values were found to be 7.0 and 8 for free and immobilized lipases, respectively. Immobilized lipase was found to retain significant activity even after the seventh use. In the final section of the study, optically pure compounds were obtained by carrying out the enantioselective hydrolysis studies of racemic esters by using immobilized lipase. Enantiomeric excesses of the products in the enantioselective hydrolysis of racemic ibuprofen and naproxen methyl ester and racemic butyl mandelate were determined to be 94.93, 77.30 and 68.15, respectively.