Isolation and application of a styrene-degrading strain of Pseudomonas putida to Biofiltration

Understanding challenges associated with plastic and bacterial approach toward plastic degradation

Plastic is widely used in every sector due to its stability, durability, and low cost. The widespread use of plastic results in the compilation of plastic waste in the environment. The buildup of such a vast volume of plastic garbage has emerged as the primary cause of environmental pollution, including air, land, and water pollution. Plastics contain various harmful chemicals and toxic substances that can leak and adversely affect humans and other organisms. Managing this much plastic waste is a very challenging task; therefore, an appropriate technique is needed to address this problem. Various methods are used, such as chemical, physical, and biological, to degrade plastic waste. Bacterial degradation is known to be the most effective technique for the biodegradation approach to overcome this issue. Biodegradation has played a crucial role in removing these polluting wastes more efficiently and eco-friendly. The process of biodegradation involves a variety of bacteria, such as Acinetobacter baumannii, Bacillus weihenstephanensis, Pseudomonas aeruginosa, Pseudomonas fluorescens, Rhodococcus ruber, and so on. Biodegradation of plastic takes place through various biochemical pathways, including biodeterioration, biofragmentation, assimilation, and mineralization. During biodegradation, bacteria produce enzymes like esterase, cutinase, laccase, lipase, and others that break down and transform plastic polymers into microbial biomass and gases. This review aims to explain how bacteria contribute to the breakdown of plastic.

The effect of temperature and styrene concentration on biogas production and degradation characteristics during anaerobic removal of styrene from wastewater

In the current study, styrene was removed anaerobically from wastewaters at temperatures of 35 ℃, 25 ℃, and 15 ℃ and concentration range of 20-150 ppm in the presence of ethanol as a co-substrate and co-solvent. Maximum styrene removal of 93% was achieved at 35 ℃. The volatilization of styrene was negligible at about 2% at all experimented temperatures. The average special methane yield (SMY) at 35 ℃ was 4.14- and 225-times higher than that of at T = 25 ℃ and T = 15 ℃, respectively, but no methane was produced in the absence of ethanol. The proteins content of the soluble microbial product (SMP) and extracellular polymeric substance (EPS) was much higher than the carbohydrate content. At styrene concentration > 80 ppm, SMY, SMP, and EPS dropped sharply. The results confirmed the well performance of anaerobic microorganisms in removing styrene from wastewater and biogas production at mesophilic condition.

Evaluation of Parallel-Series Configurations of Two-Phase Partitioning Biotrickling Filtration and Biotrickling Filtration for Treating Styrene Gas-Phase Emissions

The removal of styrene from industrial representative gaseous emissions was studied using two reactors connected in series: a two-phase partitioning biotrickling filter (TPPB-BTF) and a conventional biotrickling filter (BTF). The system was operated under industrial conditions, which included steady and transient conditions and intermittent spraying. Silicone oil was used in the TPPB-BTF with a quantity as low as 25 mL L−1, promoting a faster start-up compared to the BTF. By working at a styrene loading of 30 g m−3 h−1, nearly complete removal efficiency (RE) was obtained. In addition, the removal was not adversely impacted by using non-steady emission patterns such as overnight shutdowns (97% RE) and oscillating concentrations (95% RE), demonstrating its viability for industrial applications. After 2 months from inoculation, two additional configurations (reverse series BTF + TPPB-BTF and parallel) were tested, showing the series configuration as the best approach to consistently achieve RE > 95%. After 51 days of operation, high throughput sequencing revealed a sharp decrease in the bacterial diversity. In both reactors, the microorganisms belonging to the Comamonadaceae family were predominant and other styrene degraders such as Pseudomonadaceae proliferated preferably in the first reactor.

Contribution of bacterial biodiversity on the operational performance of a styrene biotrickling filter

Long-term operational stability of biotrickling filters (BTFs) degrading volatile organic compounds (VOCs) is dependent on both physicochemical as well as biological properties. Effects of increasingly stressful levels of air pollutants on the microbial structure of biofilms within BTFs are not well understood, especially for VOCs such as styrene. To investigate the relationship between biofilm biodiversity and operational stability, the temporal dynamics of a biofilm from a biotrickling filter subjected to stepwise increasing levels of air polluted with styrene was investigated using 16S rDNA pyrosequencing and PCR-denaturing gradient gel electrophoresis (PCR-DGGE). As styrene contaminant loads were increased, microbial community composition was distinctly altered and diversity was initially reduced in early stages but gradually stabilized and increased diversity in later stages, suggesting a recovery and acclimatization period within the microbial community during incremental exposure of the pollutant. Although temporary reductions in known styrene-degrading bacterial genera (Pseudomonas and Rhodococcus) occurred under increased styrene loads, stable BTF performance was maintained due to functional redundancy. New candidate genera for styrene degradation (Azoarcus, Dokdonella) were identified in conditions of high styrene loads, and may have supported the observed stable BTF performance throughout the experiment. Styrene inlet load was found to be important modulator of community composition and may have been partly responsible for the observed temporary reductions of Pseudomonas. Notable differences between dominant genera detected via pyrosequencing compared to species detected by PCR-DGGE suggests that simultaneous implementation of both techniques is valuable for fully characterizing dynamic microbial communities.

P, S. CF, A. G. Exploring the styrene metabolism by aerobic bacterial isolates for the effective management of leachates in an aqueous system

In the present study, the styrene metabolic profile of three aerobic bacterial isolates explored in a batch mode study. The isolates found application in the management of elachates in the waste dump yard. These three bacterial species have different origins and were studied as a single and mixed consortia. The Lysinibacillus strain M01 (from marine sources), Lysinibacillus strain WD03 (from a waste dump yard), and Pseudomonas strain BG07 (from bovine gut) were used in the present study. The styrene concentration was fixed in the range between 0.5 and 1.5 mL L⁻¹. The metabolites obtained upon microbial degradation were assessed using high-performance liquid chromatography (HPLC), UV-visible spectroscopy, and FTIR spectroscopy (Fourier transform infrared spectroscopy). Furthermore, the genes (Sty A, B, C, D, and E) responsible for the degradation of styrene by the three abovementioned isolates were identified using PCR with respective designed primers. Instrumental analyses revealed the presence of phenylacetic acid (PAA) at significant levels in the growth medium after the scheduled experimental period and confirmed the metabolism of styrene by the chosen isolates. Compared to the case of individual cultures, the results of the mixed consortia support the metabolism of styrene at appreciable levels. The present study provides a suitable biological solution for the management of leachates containing styrene and a way to achieve industrially important chemicals (PAA) through a microbially mediated process.

Profile of the three potential aerobic bacterial isolates responsible for the metabolism of styrene.

Pf16 and phiPMW: Expanding the realm of Pseudomonas putida bacteriophages

We present the analysis of two novel Pseudomonas putida phages, pf16 and phiPMW. Pf16 represents a peripherally related T4-like phage, and is the first of its kind infecting a Pseudomonad, with evidence suggesting cyanophage origins. Extensive divergence has resulted in pf16 occupying a newly defined clade designated as the pf16-related phages, lying at the interface of the Schizo T-Evens and Exo T-Evens. Recombination with an ancestor of the P. putida phage AF is likely responsible for the tropism of this phage. phiPMW represents a completely novel Pseudomonas phage with a genome containing substantial genetic novelty through its many hypothetical proteins. Evidence suggests that this phage has been extensively shaped through gene transfer events and vertical evolution. Phylogenetics shows that this phage has an evolutionary history involving FelixO1-related viruses but is in itself highly distinct from this group.

Biodegradation of airborne acetone/styrene mixtures in a bubble column reactor

The ability of a bubble column reactor (BCR) to biodegrade a mixture of styrene and acetone vapors was evaluated to determine the factors limiting the process efficiency, with a particular emphasis on the presence of degradation intermediates and oxygen levels. The results obtained under varied loadings and ratios were matched with the dissolved oxygen levels and kinetics of oxygen mass transfer, which was assessed by determination of k_La coefficients. A 1.5-L laboratory-scale BCR was operated under a constant air flow of 1.0 L.min^-1, using a defined mixed microbial population as a biocatalyst. Maximum values of elimination capacities/maximum overall specific degradation rates of 75.5 gC.m^-3.h^-1/0.197 gC.gdw^-1.h^-1, 66.0 gC.m^-3.h^-1/0.059 gC.gdw^-1.h^-1, and 45.8 gC.m^-3.h^-1/0.027 gC.gdw^-1.h^-1 were observed for styrene/acetone 2:1, styrene-rich and acetone-rich mixtures, respectively, indicating significant substrate interactions and rate limitation by biological factors. The BCR removed both acetone and styrene near-quantitatively up to a relatively high organic load of 50 g.m^-3.h^-1. From this point, the removal efficiencies declined under increasing loading rates, accompanied by a significant drop in the dissolved oxygen concentration, showing a process transition to oxygen-limited conditions. However, the relatively efficient pollutant removal from air continued, due to significant oxygen mass transfer, up to a threshold loading rate when the accumulation of acetone and degradation intermediates in the aqueous medium became significant. These observations demonstrate that oxygen availability is the limiting factor for efficient pollutant degradation and that accumulation of intermediates may serve as an indicator of oxygen limitation. Microbial (activated sludge) analyses revealed the presence of amoebae and active nematodes that were not affected by variations in operational conditions.

A newly isolated Pseudomonas putida S-1 strain for batch-mode-propanethiol degradation and continuous treatment of propanethiol-containing waste gas

Pseudomonas putida S-1 was isolated from activated sludge. This novel strain was capable of degrading malodorous 1-propanethiol (PT). PT degradation commenced with no lag phase by cells pre-grown in nutrition-rich media, such as Luria-Bertani (LB), and PT-contained mineral medium at specific growth rates of 0.10-0.19 h(-1); this phenomenon indicated the operability of a large-scale cell culture. A possible PT degradation pathway was proposed on the basis of the detected metabolites, including dipropyl disulfide, 3-hexanone, 2-hexanone, 3-hexanol, 2-hexanol, S(0), SO4(2-), and CO2. P. putida S-1 could degrade mixed pollutants containing PT, diethyl disulfide, isopropyl alcohol, and acetaldehyde, and LB-pre-cultured cells underwent diauxic growth. Waste gas contaminated with 200-400 mg/m(3) PT was continuously treated by P. putida S-1 pre-cultured in LB medium in a completely stirred tank reactor. The removal efficiencies exceeded 88% when PT stream was mixed with 200 mg/m(3) isopropanol; by contrast, the removal efficiencies decreased to 60% as the empty bed residence time was shortened from 40 s to 20 s.

Investigating bacterial populations in styrene-degrading biofilters by 16S rDNA tag pyrosequencing

Microbial biofilms are essential components in the elimination of pollutants within biofilters, yet still little is known regarding the complex relationships between microbial community structure and biodegradation function within these engineered ecosystems. To further explore this relationship, 16S rDNA tag pyrosequencing was applied to samples taken at four time points from a styrene-degrading biofilter undergoing variable operating conditions. Changes in microbial structure were observed between different stages of biofilter operation, and the level of styrene concentration was revealed to be a critical factor affecting these changes. Bacterial genera Azoarcus and Pseudomonas were among the dominant classified genera in the biofilter. Canonical correspondence analysis (CCA) and correlation analysis revealed that the genera Brevundimonas, Hydrogenophaga, and Achromobacter may play important roles in styrene degradation under increasing styrene concentrations. No significant correlations (P > 0.05) could be detected between biofilter operational/functional parameters and biodiversity measurements, although biological heterogeneity within biofilms and/or technical variability within pyrosequencing may have considerably affected these results. Percentages of selected bacterial taxonomic groups detected by fluorescence in situ hybridization (FISH) were compared to results from pyrosequencing in order to assess the effectiveness and limitations of each method for identifying each microbial taxon. Comparison of results revealed discrepancies between the two methods in the detected percentages of numerous taxonomic groups. Biases and technical limitations of both FISH and pyrosequencing, such as the binding of FISH probes to non-target microbial groups and lack of classification of sequences for defined taxonomic groups from pyrosequencing, may partially explain some differences between the two methods.

A biofilter integrated with gas membrane separation unit for the treatment of fluctuating styrene loads

Biofiltration for volatile organic compound control in waste gas streams is best operated at steady contaminant loadings. To provide long-term stable operation of a biofilter under adverse contaminant feeding conditions, an integrated bioreactor system with a gas separation membrane module installed after a biofilter was proposed for styrene treatment. Styrene was treated effectively, with average styrene effluent concentrations maintained at less than 50 mg m(-3) and a total removal efficiency of over 96% achieved when the biofiltration column faced fluctuating loads. The maximum elimination capacity of the integrated bioreactor system was 93.8 g m(-3)h(-1), which was higher than that obtained with the biofiltration column alone. The combination of these two processes (microbial and chemical) led to more efficient elimination of styrene and buffering of the fluctuating loads. The factors on gas membrane separation, microbial characteristics in the integrated bioreactor and membrane fouling were also investigated in this study.

Removal of gaseous toluene using immobilized Candida tropicalis in a fluidized bed bioreactor

A pure yeast strain Candida tropicalis was immobilized on the matrix of powdered activated carbon, sodium alginate, and polyethylene glycol (PSP beads). The immobilized beads were used as fluidized material in a bioreactor to remove toluene from gaseous stream. Applied toluene loadings were 15.4 and 29.8 g/m³ h in Step 1 and Step 2, respectively, and toluene removal was found above 95% during the entire operation. A continuous pH decline was observed and pH of the suspension was just above 6 in Step 2 but no adverse effects on treatment efficiency were observed. The CO₂ yield values were found to be 0.57 and 0.62 g- in Step 1 and Step 2, respectively. These values indicate that a major portion of toluene-carbon was channeled to yeast respiration even at higher toluene loading. In conclusion, immobilized C. tropicalis can be used as a fluidized material for enhanced degradation of gaseous toluene.

Kinetics of styrene biodegradation by Pseudomonas sp. E-93486

The research into kinetics of styrene biodegradation by bacterial strain Pseudomonas sp. E-93486 coming from VTT Culture Collection (Finland) was presented in this work. Microbial growth tests in the presence of styrene as the sole carbon and energy source were performed both in batch and continuous cultures. Batch experiments were conducted for initial concentration of styrene in the liquid phase changed in the range of 5–90 g m⁻³. The Haldane model was found to be the best to fit the kinetic data, and the estimated constants of the equation were: μ_m = 0.1188 h⁻¹, K_S = 5.984 mg l⁻¹, and K_i = 156.6 mg l⁻¹. The yield coefficient mean value \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ Y_{\text{xs}}^{\text{app}} $$\end{document} for the batch culture was 0.72 g_{dry cells weight} (g_substrate)⁻¹. The experiments conducted in a chemostat at various dilution rates (D = 0.035–0.1 h⁻¹) made it possible to determine the value of the coefficient for maintenance metabolism m_d = 0.0165 h⁻¹ and the maximum yield coefficient value \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ Y_{\text{xs}}^{\text{M}} = 0.913 $$\end{document}. Chemostat experiments confirmed the high value of yield coefficient \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ Y_{\text{xs}}^{\text{app}} $$\end{document} observed in the batch culture. The conducted experiments showed high activity of the examined strain in the styrene biodegradation process and a relatively low sensitivity to inhibition of its growth at higher concentrations of styrene in the solution. Such exceptional features of Pseudomonas sp. E-93486 make this bacterial strain the perfect candidate for technical applications.

Kinetics of styrene biodegradation in synthetic wastewaters using an industrial activated sludge

Kinetics of styrene biodegradation in synthetic wastewaters, containing either styrene or styrene together with ethanol, by an industrial activated sludge obtained from the wastewater treatment unit of a petrochemical complex was studied. The kinetic data could be fitted using the Haldane kinetic model. This model was previously used to predict kinetic data for biodegradation of styrene by pure or mixed microbial cultures isolated from biofilters, but the values of the model parameters reported in these studies was substantially different from that obtained for the industrial activated sludge. The presence of ethanol did not affect the kinetics of styrene biodegradation by the industrial activated sludge; however, it increased the rates of styrene biodegradation due to the resulting higher microbial growth rates. Styrene concentration was found to affect the specific growth rate in a manner similar to its effect on the styrene degradation rate. No lag phase was observed in styrene biodegradation by industrial activated sludge for styrene concentrations up to 100mg/L. Lag phase was observed for municipal activated sludge even at 50mg/L styrene concentration but the rate of styrene biodegradation after the lag phase was similar to that achieved by the industrial activated sludge.

Biodegradation of gaseous chlorobenzene by white-rot fungus Phanerochaete chrysosporium

OBJECTIVE

To evaluate the effect of white rot fungus Phanerochaete chrysosporium on removal of gaseous chlorobenzene.

METHODS

Fungal mycelium mixed with a liquid medium was placed into airtight bottles. A certain amount of chlorobenzene was injected into the headspace of the bottles under different conditions. At a certain interval, the concentrations in the headspace were analyzed to evaluate the degradation of chlorobenzene by P. chrysosporium.

RESULTS

The degradation effects of P. chrysosporium on chlorobenzene under different conditions were investigated. The difference in the optimum temperature for the growth of the fungi and chlorobenzene degradation was observed. The data indicated that a lower temperature (28 degrees C) would promote the degradation of chlorobenzene than the optimum temperature for the growth of the fungi (37 degrees C). A low nitrogen source concentration (30 mg N/L) had a better effect on degrading chlorobenzene than a high nitrogen source concentration (higher than 100 mg N/L). A high initial concentration (over 1100 mg/m3) of chlorobenzene showed an inhibiting effect on degradation by P. chrysosporium. A maximum removal efficiency of 95% was achieved at the initial concentration of 550 mg/m3.

CONCLUSION

P. chrysosporium has a rather good ability to remove gaseous chlorobenzene. A low nitrogen source concentration and a low temperature promote the removal of chlorobenzene by P. chrysosporium. However, a high initial chlorobenzene concentration can inhibit chlorobenzene degradation.

Enhancement of styrene removal efficiency in biofilter by mixed cultures of Pseudomonas sp. SR-5

The styrene-degrading bacterium Pseudomonas sp. SR-5 exhibited a high styrene removability in a biofilter. However, the styrene removal efficiency (RE) of SR-5 decreased with time. We carried out styrene gas removal in a biofilter inoculated with mixed cultures of SR-5 and other microorganisms to determine the possibility of obtaining an enhanced RE for a long period. The following three inocula were carried out: (i) styrene-degrading bacteria, strains 1 and 3, (ii) a benzoic acid-degrading bacterium Raoultella sp. A, and (iii) wastewater from a chemical company dealing with styrene. These biofilters with mixed SR-5 showed an enhanced RE compared with those with a single culture of SR-5. The complete styrene elimination capacities for ensuring 100% styrene removal in those mixed cultures were 151, 108 and 124 g/m(3)/h, compared with a single culture of SR-5.

Characteristics of styrene degradation by Rhodococcus pyridinovorans isolated from a biofilter

A novel strain (PYJ-1) of Rhodococcus pyridinovorans that was isolated from a biofilter was able to degrade styrene at a maximum rate of 0.16 mg (mg protein)(-1) h(-1) in batch culture at 97 mg l(-1) of initial styrene gas concentration. The optimum pH and temperature for styrene degradation were 7 and 32 degrees C, respectively. The degradation kinetic constants were obtained using substrate inhibition kinetics. In a perlite-packed biofilter the maximum styrene removal rate by the strain was 279 gm(-3)h(-1). Styrene removal in the biofilter was more sensitive to the temperature than in the batch culture.

Performance of a styrene-degrading biofilter inoculated with Pseudomonas sp. SR-5

Styrene removal was studied for 3 months in a laboratory-scale biofilter packed with a mixed packing material of peat and ceramic at a ratio of 1 to 1 on a dry-weight basis and inoculated with Pseudomonas sp. SR-5. More than 90% removal efficiency (RE) was attained at 1-140 g/m3/h styrene loads under nitrogen-source limitation. When RE decreased to 70% after 30 d with an increase in styrene load, readdition of SR-5 and washing of the filter packing material restored the RE to more than 90% by maintaining the population of SR-5 at 1-10% of the total cell number. The maximum elimination capacity (EC) by kinetic analysis was estimated to be 290 g/m3/h. High conversion of the removed styrene carbon to CO2, and significantly small production of cell mass from the removed carbon were confirmed.