Role of phospholipids in the oral and parenteral delivery of poorly water soluble drugs

Surfactants for stabilization of dermal emulsions and their skin compatibility under UVA irradiation: Diacyl phospholipids and polysorbate 80 result in high viability rates of primary human skin cells

Phospholipids are versatile formulation compounds with high biocompatibility. However, no data on their effect on skin in combination with UVA radiation exist. Thus, it was the aim of this work to (i) develop o/w nanoemulsions (NEs) differing in surfactant type and to investigate their physicochemical stability at different storage temperatures, (ii) establish a standardized protocol for in vitro phototoxicity testing using primary human skin cells and (iii) investigate the phototoxicity of amphoteric phospholipids (S45, S75, E80, S100, LPC80), sodium lauryl ether sulfate (SLES) and polysorbate 80 (PS80). Satisfying systems were developed with all surfactants except S100 due to low zeta potential (-21.4 mV ± 4.69). SLES and PS80-type NEs showed the highest stability after eight weeks; temperature-dependent variations in storage stability were most noticeable for phospholipid surfactants. For phospholipid-based NEs, higher phosphatidylcholine content led to unstable formulations. Phototoxicity assays with primary skin fibroblasts confirmed the lack of UVA-related phototoxicity but revealed cytotoxic effects of LPC80 and SLES, resulting in cell viability as low as 2.7 % ±0.78 and 1.9 % ±1.57 compared to the control. Our findings suggest that surfactants S45, S75 and PS80 are the most promising candidates for skin-friendly emulsifiers in sensitive applications involving exposure to UV light.

The Phospholipid Research Center: Current Research in Phospholipids and Their Use in Drug Delivery

This review summarizes the research on phospholipids and their use for drug delivery related to the Phospholipid Research Center Heidelberg (PRC). The focus is on projects that have been approved by the PRC since 2017 and are currently still ongoing or have recently been completed. The different projects cover all facets of phospholipid research, from basic to applied research, including the use of phospholipids in different administration forms such as liposomes, mixed micelles, emulsions, and extrudates, up to industrial application-oriented research. These projects also include all routes of administration, namely parenteral, oral, and topical. With this review we would like to highlight possible future research directions, including a short introduction into the world of phospholipids.

Phosphatidylserine (PS) and phosphatidylglycerol (PG) enriched mixed micelles (MM): A new nano-drug delivery system with anti-inflammatory potential?

Phosphatidylserine (PS) and phosphatidylglycerol (PG) are naturally occurring phospholipids (PL) with intrinsic anti-inflammatory properties. The therapeutic potential of PS and PG has not been extensively explored and the main focus had been directed towards PS- and PG-liposomes. In order to increase the formulation options, we explored whether mixed micelles (MM) could be an alternative to liposomes. Potential advantages of MM are their thermodynamic stability, small size and ease of manufacture. DOPS- and DOPG-enriched MM were obtained via a co-precipitation technique and physicochemical characterization was performed. The MM, approximately 10 nm in diameter, showed no toxicity on fibroblast cell lines in vitro and virtually no hemolytic activity. The MM suppressed the TNFα-production of mIFNγ/LPS-stimulated mouse peritoneal macrophages (MPM) in vitro similar to DOPS- and DOPG-liposomes. Therefore, DOPS- and DOPG-loaded MM are promising new options for the treatment of inflammatory diseases.

Green Formulation of Triglyceride/Phospholipid-Based Nanocarriers as a Novel Vehicle for Oral Coenzyme Q10 Delivery

This study was aimed to develop a novel nanocarrier for coenzyme Q10 (CoQ10) by a green process that prevented the use of surfactants and organic solvents. Triglyceride/phospholipid-based nanocarriers were developed through high-pressure homogenization (an industrial feasible process), and a 2^5-1 fractional factorial design was adopted to assess the influences of formulation variables on the considered responses, including vesicle size, entrapment efficiency, loading capacity, and solubility of the vehicles in simulated gastrointestinal fluids. The optimized formulation was further in-depth characterized in terms of morphology, release behavior, biocompatibility (Caco-2 cell cytotoxicity and histological examination), thermal behavior, and Fourier transform infrared analysis. Optimal nanocarriers were found to have mean particle size of 75 nm, narrow particle distribution, and CoQ10 entrapment of 95%. The optimized formulation was stable upon incubation in simulated gastrointestinal fluids without considerable leakage of cargo, which was in agreement with their sustained release behavior. Microscopic observations also confirmed nanosized nature of the vesicles and revealed their spherical shape. Moreover, toxicity evaluations at the cellular and tissue levels revealed their nontoxic nature. In conclusion, triglyceride/phospholipid-based nanocarriers proved to be a green safe vehicle for delivery of CoQ10 with industrial-scale production capability and could provide a new horizon for delivery of hydrophobic nutraceuticals. PRACTICAL APPLICATION: Green nanostructure formulation approaches have recently gained tremendous attraction for their safe profile especially when it comes to supplements, which are generally recommended for daily use. However, their sufficient association with cargoes and industrial-scale production have remained considerable challenges. This study focuses on the development of lipid-based nanocarriers for CoQ10 by an industrial feasible process that prevents the use of any surfactants or organic solvents.

Pitfalls in Size Characterization of Soft Particles by Dynamic Light Scattering Online Coupled to Asymmetrical Flow Field-Flow Fractionation

An asymmetrical flow field-flow fractionation (AF4) technique coupled to a multiangle light scattering (MALS) detector with an embedded dynamic light scattering (DLS) module was introduced to study the size characteristics and shape of soft particles of various size and type: polystyrene nanosphere size standards, lipid droplets (LDs), and large unilamellar vesicles (LUVs). A range of flow velocities through the LS detector, at which accurate hydrodynamic size can be extracted from the DLS in flow mode, was studied since the particles subjected to a longitudinal flow exhibit not only the Brownian motion due to diffusion but also the translational movement. In addition, the impact of the longitudinal flow velocity on the shape of the artificial LUV of two different sizes and two different compositions was studied by MALS. For comparison, the conventional batch DLS and static light scattering (SLS) experiments without prior sample separation by size were performed. From a combination of batch and flow light scattering results, we concluded that the passage flow velocities at the detector used in this study, 0.2, 0.5, and 1 mL/min, have no significant impact on the shape of spherical vesicles; however, the flow DLS experiments give accurate hydrodynamic radius (R_h) only at the lowest investigated passage flow rate at the detector (0.2 mL/min). With increasing rate of passage flow at the DLS detector, the error in the accuracy of the R_h determination rapidly increases. The error in R_h depends solely on the detector flow rate and particle size but not on the type of the soft particle.

Review - An update on the use of oral phospholipid excipients

The knowledge and experiences obtained with oral phospholipid excipients is increasing continuously. Nevertheless the present number of oral products using these excipients as essential excipient is very limited. This is remarkable to note, since phospholipids play a significant role in the food uptake mechanisms of the GI tract and these mechanisms could be translated into suitable dosage forms and corresponding drug delivery strategies. In addition, phospholipid excipients are multifunctional biodegradable, non-toxic excipients, which can be used in oral dosage forms as wetting agents, emulsifier, solubilizer and matrix forming excipients. Especially natural phospholipid excipients, made from renewable sources, may be considered as environmentally friendly excipients and as a viable alternative to synthetic phospholipid and non-phospholipid analogues. This review describes 1) essential physico-chemical properties of oral phospholipid excipients 2) the fate of orally administered phospholipids with respect to absorption and metabolism in the GI tract 3) the main dosage forms used for oral administration containing phospholipids. These elements are critically assessed and areas of future research of interest for the use of oral phospholipid excipients are summarized.

Evaluation of the drug loading capacity of different lipid nanoparticle dispersions by passive drug loading

When using lipid nanoparticles as drug carrier system it is important to know how much drug can be loaded to the nanoparticles. The mainly used drug loading procedure is an empirical approach dissolving the drug in the liquid lipid during preparation of the nanoparticles. This approach does not necessarily lead to the truly loadable amount, as the lipid can, e.g. be overloaded, in particular when it is processed in the heat. In this work, a different procedure, passive drug loading, was evaluated to determine the drug loading capacity of various lipid nanoparticles (supercooled trimyristin emulsion droplets, solid trimyristin nanoparticles, tristearin nanoparticles in the α-modification and cholesteryl myristate nanoparticles in the supercooled smectic as well as in the crystalline state). The nanoparticle dispersions were exposed to eight different model drug compounds (betamethasone-17-valerate, carbamazepine, diazepam, flufenamic acid, griseofulvin, ibuprofen, retinyl palmitate, ubidecarenone) in the bulk state, which varied in partition coefficient and aqueous solubility, and equilibrated over time. The passive loading procedure had no relevant impact on the particle sizes or the physicochemical state of the nanoparticles. The loadable drug amount differed distinctly for the different model compounds and also between the different types of lipid nanoparticles. For most compounds, the loaded amount was much higher than the aqueous solubility. Trimyristin-based dispersions generally had the highest loading capacity, the emulsion usually being equal or superior to the solid trimyristin nanoparticles. For betamethasone-17-valerate, however, solid lipid nanoparticles exhibited by far the highest drug load. The extremely lipophilic model drugs retinyl palmitate and ubidecarenone could not be loaded with the passive approach.

Quantitative In Vitro Assessment of Liposome Stability and Drug Transfer Employing Asymmetrical Flow Field-Flow Fractionation (AF4)

PURPOSE

In the present study we introduce an efficient approach for a size-based separation of liposomes from plasma proteins employing AF4. We investigated vesicle stability and release behavior of the strongly lipophilic drug temoporfin from liposomes in human plasma for various incubation times at 37°C.

METHODS

We used the radioactive tracer cholesteryl oleyl ether (COE) or dipalmitoyl-phosphocholine (DPPC) as lipid markers and (14)C-labeled temoporfin. First, both lipid labels were examined for their suitability as liposome markers. Furthermore, the influence of plasma origin on liposome stability and drug transfer was investigated. The effect of membrane fluidity and PEGylation on vesicle stability and drug release characteristics was also analyzed.

RESULTS

Surprisingly, we observed an enzymatic transfer of (3)H-COE to lipoproteins due to the cholesterol ester transfer protein (CETP) in human plasma in dependence on membrane rigidity and were able to inhibit this transfer by plasma preincubation with the CETP inhibitor torcetrapib. This effect was not seen when liposomes were incubated in rat plasma. DPPC labels suffered from hydrolysis effects during preparation and/or storage. Fluid liposomes were less stable in human plasma than their PEGylated analogues or a rigid formulation. In contrast, the transfer of the incorporated drug to lipoproteins was higher for the rigid formulations.

CONCLUSIONS

The observed effects render COE-labels questionable for in vivo studies using CEPT-rich species. Here, choline labelled (14)C-DPPC was found to be the most promising alternative. Bilayer composition has a high influence on stability and drug release of a liposomal formulation in human plasma.

The use of natural and synthetic phospholipids as pharmaceutical excipients

In pharmaceutical formulations, phospholipids obtained from plant or animal sources and synthetic phospholipids are used. Natural phospholipids are purified from, e.g., soybeans or egg yolk using non-toxic solvent extraction and chromatographic procedures with low consumption of energy and minimum possible waste. Because of the use of validated purification procedures and sourcing of raw materials with consistent quality, the resulting products differing in phosphatidylcholine content possess an excellent batch to batch reproducibility with respect to phospholipid and fatty acid composition. The natural phospholipids are described in pharmacopeias and relevant regulatory guidance documentation of the Food and Drug Administration (FDA) and European Medicines Agency (EMA). Synthetic phospholipids with specific polar head group, fatty acid composition can be manufactured using various synthesis routes. Synthetic phospholipids with the natural stereochemical configuration are preferably synthesized from glycerophosphocholine (GPC), which is obtained from natural phospholipids, using acylation and enzyme catalyzed reactions. Synthetic phospholipids play compared to natural phospholipid (including hydrogenated phospholipids), as derived from the number of drug products containing synthetic phospholipids, a minor role. Only in a few pharmaceutical products synthetic phospholipids are used. Natural phospholipids are used in oral, dermal, and parenteral products including liposomes. Natural phospholipids instead of synthetic phospholipids should be selected as phospholipid excipients for formulation development, whenever possible, because natural phospholipids are derived from renewable sources and produced with more ecologically friendly processes and are available in larger scale at relatively low costs compared to synthetic phospholipids. Practical applications: For selection of phospholipid excipients for pharmaceutical formulations, natural phospholipids are preferred compared to synthetic phospholipids because they are available at large scale with reproducible quality at lower costs of goods. They are well accepted by regulatory authorities and are produced using less chemicals and solvents at higher yields. In order to avoid scale up problems during pharmaceutical development and production, natural phospholipid excipients instead of synthetic phospholipids should be selected whenever possible.

Multiscale structures of lipids in foods as parameters affecting fatty acid bioavailability and lipid metabolism

On a nutritional standpoint, lipids are now being studied beyond their energy content and fatty acid (FA) profiles. Dietary FA are building blocks of a huge diversity of more complex molecules such as triacylglycerols (TAG) and phospholipids (PL), themselves organised in supramolecular structures presenting different thermal behaviours. They are generally embedded in complex food matrixes. Recent reports have revealed that molecular and supramolecular structures of lipids and their liquid or solid state at the body temperature influence both the digestibility and metabolism of dietary FA. The aim of the present review is to highlight recent knowledge on the impact on FA digestion, absorption and metabolism of: (i) the intramolecular structure of TAG; (ii) the nature of the lipid molecules carrying FA; (iii) the supramolecular organization and physical state of lipids in native and formulated food products and (iv) the food matrix. Further work should be accomplished now to obtain a more reliable body of evidence and integrate these data in future dietary recommendations. Additionally, innovative lipid formulations in which the health beneficial effects of either native or recomposed structures of lipids will be taken into account can be foreseen.

Drug delivery strategies for poorly water-soluble drugs: the industrial perspective

INTRODUCTION

For poorly soluble compounds, a good bioavailability is typically needed to assess the therapeutic index and the suitability of the compound for technical development. In industry, the selection of the delivery technology is not only driven by technical targets, but also by constraints, such as production costs, time required for development and the intellectual property situation.

AREAS COVERED

This review covers current developments in parenteral and oral delivery technologies and products for poorly water-soluble compounds, such as nano-suspensions, solid dispersions and liposomes. In addition, the use of biorelevant dissolution media to assess dissolution and solubility properties is described. Suggestions are also included to systematically address development hurdles typical of poorly water-soluble compounds intended for parenteral or oral administration.

EXPERT OPINION

A holistic assessment is recommended to select the appropriate delivery technology by taking into account technical as well as intellectual property considerations. Therefore, first and foremost, a comprehensive physico-chemical characterization of poorly water-soluble compounds can provide the key for a successful selection and development outcome. In this context, the identified physical form of the compound in the formulation is used as a guide for a risk-benefit assessment of the selected oral delivery technology. The potential of nano-suspensions for intravenous administration is unclear. In the case of oral administration, nano-suspensions are mainly used to improve the oral absorption characteristics of micronized formulations. The development of an in situ instantaneous solubilization method, based on stable, standardized liposomes with low toxicity, opens new avenues to solubilize poorly water-soluble compounds.