Chemical and photocatalytic water oxidation by mononuclear Ru catalysts

Outpacing conventional nicotinamide hydrogenation catalysis by a strongly communicating heterodinuclear photocatalyst

Unequivocal assignment of rate-limiting steps in supramolecular photocatalysts is of utmost importance to rationally optimize photocatalytic activity. By spectroscopic and catalytic analysis of a series of three structurally similar [(tbbpy)2Ru-BL-Rh(Cp*)Cl]3+ photocatalysts just differing in the central part (alkynyl, triazole or phenazine) of the bridging ligand (BL) we are able to derive design strategies for improved photocatalytic activity of this class of compounds (tbbpy = 4,4´-tert-butyl-2,2´-bipyridine, Cp* = pentamethylcyclopentadienyl). Most importantly, not the rate of the transfer of the first electron towards the RhIII center but rather the rate at which a two-fold reduced RhI species is generated can directly be correlated with the observed photocatalytic formation of NADH from NAD+. Interestingly, the complex which exhibits the fastest intramolecular electron transfer kinetics for the first electron is not the one that allows the fastest photocatalysis. With the photocatalytically most efficient alkynyl linked system, it is even possible to overcome the rate of thermal NADH formation by avoiding the rate-determining β-hydride elimination step. Moreover, for this photocatalyst loss of the alkynyl functionality under photocatalytic conditions is identified as an important deactivation pathway.

Structure-Activity Relationship for Di- up to Tetranuclear Macrocyclic Ruthenium Catalysts in Homogeneous Water Oxidation

Two di- and tetranuclear Ru(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylate) macrocyclic complexes were synthesized and their catalytic activities in chemical and photochemical water oxidation investigated in a comparative manner to our previously reported trinuclear congener. Our studies have shown that the catalytic activities of this homologous series of multinuclear Ru(bda) macrocycles in homogeneous water oxidation are dependent on their size, exhibiting highest efficiencies for the largest tetranuclear catalyst. The turnover frequencies (TOFs) have increased from di- to tetranuclear macrocycles not only per catalyst molecule but more importantly also per Ru unit with TOF of 6 s-1 to 8.7 s-1 and 10.5 s-1 in chemical and 0.6 s-1 to 3.3 s-1 and 5.8 s-1 in photochemical water oxidation per Ru unit, respectively. Thus, for the first time, a clear structure-activity relationship could be established for this novel class of macrocyclic water oxidation catalysts.

Off-Set Interactions of Ruthenium-bda Type Catalysts for Promoting Water-Splitting Performance

O-O bond formation with Ru(bda)L2 -type catalysts is well-known to proceed through a bimolecular reaction pathway, limiting the potential application of these catalysts at low concentrations. Herein, we achieved high efficiencies with mononuclear catalysts, with TOFs of 460±32 s-1 at high catalyst loading and 31±3 s-1 at only 1 μM catalyst concentration, by simple structural considerations on the axial ligands. Kinetic and DFT studies show that introduction of an off-set in the interaction between the two catalytic units reduces the kinetic barrier of the second-order O-O bond formation, maintaining high catalytic activity even at low catalyst concentrations. The results herein furthermore suggest that π-π interactions may only play a minor role in the observed catalytic activity, and that asymmetry can also rationalize high activity observed for Ru(bda)(isoq)2 type catalysts and offer inspiration to overcome the limitations of 2nd order catalysis.

A Calix[4]arene-Based Cyclic Dinuclear Ruthenium Complex for Light-Driven Catalytic Water Oxidation

A cyclic dinuclear ruthenium(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylate) complex equipped with oligo(ethylene glycol)-functionalized axial calix[4]arene ligands has been synthesized for homogenous catalytic water oxidation. This novel Ru(bda) macrocycle showed significantly increased catalytic activity in chemical and photocatalytic water oxidation compared to the archetype mononuclear reference [Ru(bda)(pic)2 ]. Kinetic investigations, including kinetic isotope effect studies, disclosed a unimolecular water nucleophilic attack mechanism of this novel dinuclear water oxidation catalyst (WOC) under the involvement of the second coordination sphere. Photocatalytic water oxidation with this cyclic dinuclear Ru complex using [Ru(bpy)3 ]Cl2 as a standard photosensitizer revealed a turnover frequency of 15.5 s-1 and a turnover number of 460. This so far highest photocatalytic performance reported for a Ru(bda) complex underlines the potential of this water-soluble WOC for artificial photosynthesis.

Electronic Influence of the 2,2'-Bipyridine-6,6'-dicarboxylate Ligand in Ru-Based Molecular Water Oxidation Catalysts

Water provides an ideal source for the production of protons and electrons required for generation of renewable fuels. Among the most-prominent electrocatalysts capable of water oxidation at low overpotentials are Ru(bda)L₂-type catalysts. Although many studies were dedicated to the investigation of the influence of structural variations, the true implication of the bda backbone on catalysis remains mostly unclarified. In this work, we further investigated if electronic effects are contributing to catalysis by Ru(bda)(pic)₂ or if the intrinsic catalytic activity mainly originates from the structural features of the ligand. Through introduction of pyrazines in the bda backbone, forming Ru(N¹-bda)(pic)₂ and Ru(N²-bda)(pic)₂, electronic differences were maximized while minimizing changes in the geometry and other intermolecular interactions. Through a combination of electrochemical analysis, chemical oxygen evolution, and density functional theory calculations, we reveal that the catalytic activity is unaffected by the electronic features of the backbone and that the unique bimolecular reactivity of the Ru(bda)L₂ family of catalysts thus purely depends on the spatial geometry of the ligand.

Impact of substituents on molecular properties and catalytic activities of trinuclear Ru macrocycles in water oxidation

Herein we report a broad series of new trinuclear supramolecular Ru(bda) macrocycles bearing different substituents at the axial or equatorial ligands which enabled investigation of substituent effects on the catalytic activities in chemical and photocatalytic water oxidation. Our detailed investigations revealed that the activities of these functionalized macrocycles in water oxidation are significantly affected by the position at which the substituents were introduced. Interestingly, this effect could not be explained based on the redox properties of the catalysts since these are not markedly influenced by the functionalization of the ligands. Instead, detailed investigations by X-ray crystal structure analysis and theoretical simulations showed that conformational changes imparted by the substituents are responsible for the variation of catalytic activities of the Ru macrocycles. For the first time, macrocyclic structure of this class of water oxidation catalysts is unequivocally confirmed and experimental indication for a hydrogen-bonded water network present in the cavity of the macrocycles is provided by crystal structure analysis. We ascribe the high catalytic efficiency of our Ru(bda) macrocycles to cooperative proton abstractions facilitated by such a network of preorganized water molecules in their cavity, which is reminiscent of catalytic activities of enzymes at active sites.

Conformational changes induced by ligand substituents in macrocyclic Ru complexes strongly affect their chemical and photocatalytic efficiencies in water oxidation.

A stable dye-sensitized photoelectrosynthesis cell mediated by a NiO overlayer for water oxidation

In the development of photoelectrochemical cells for water splitting or CO₂ reduction, a major challenge is O₂ evolution at photoelectrodes that, in behavior, mimic photosystem II. At an appropriate semiconductor electrode, a water oxidation catalyst must be integrated with a visible light absorber in a stable half-cell configuration. Here, we describe an electrode consisting of a light absorber, an intermediate electron donor layer, and a water oxidation catalyst for sustained light driven water oxidation catalysis. In assembling the electrode on nanoparticle SnO₂/TiO₂ electrodes, a Ru(II) polypyridyl complex was used as the light absorber, NiO was deposited as an overlayer, and a Ru(II) 2,2'-bipyridine-6,6'-dicarboxylate complex as the water oxidation catalyst. In the final electrode, addition of the NiO overlayer enhanced performance toward water oxidation with the final electrode operating with a 1.1 mA/cm² photocurrent density for 2 h without decomposition under one sun illumination in a pH 4.65 solution. We attribute the enhanced performance to the role of NiO as an electron transfer mediator between the light absorber and the catalyst.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO₂ reduction and N₂ fixation reactions.

From Enzymes to Functional Materials-Towards Activation of Small Molecules

The design of non-noble metal-containing heterogeneous catalysts for the activation of small molecules is of utmost importance for our society. While nature possesses very sophisticated machineries to perform such conversions, rationally designed catalytic materials are rare. Herein, we aim to raise the awareness of the overall common design and working principles of catalysts incorporating aspects of biology, chemistry, and material sciences.

Immobilising a cobalt cubane catalyst on a dye-sensitised TiO2 photoanode via electrochemical polymerisation for light-driven water oxidation

A cobalt cubane catalyst Co₄O₄(O₂CMe)₄(4-vinylpy)₄ was immobilised on a dye-sensitized TiO₂ electrode via electrochemical polymerization for light-driven water oxidation.

Band-gap engineering of porous BiVO4 nanoshuttles by Fe and Mo co-doping for efficient photocatalytic water oxidation

We demonstrate the first synthesis of uniform Fe and Mo co-doped BiVO₄ (Fe/Mo-BVO) porous nanoshuttles (PNSs) through a simple solvothermal method combined with a subsequent impregnation thermal treatment.

Design of mononuclear ruthenium catalysts for low-overpotential water oxidation

Water oxidation is a key reaction in natural photosynthesis and in many schemes for artificial photosynthesis. Inspired by energy challenges and the emerging understanding of photosystem II, the development of artificial molecular catalysts for water oxidation has become a highly active area of research in recent years. In this Focus Review, we describe recent achievements in the development of single-site ruthenium catalysts for water oxidation with a particular focus on the overpotential of water oxidation. First, we introduce the general scheme to access the high-valent ruthenium-oxo species, the key species of the water-oxidation reaction. Next, the mechanisms of the OO bond formation from the active ruthenium-oxo species are described. We then discuss strategies to decrease the onset potentials of the water-oxidation reaction. We hope this Focus Review will contribute to the further development of efficient catalysts toward sustainable energy-conversion systems.