Hydrogen producing water treatment through mesoporous TiO2 nanofibers with oriented nanocrystals

How can heteroatoms boost the performance of photoactive nanomaterials for wastewater purification?

Photocatalysis, as an alternative for treating persistent water pollutants, holds immense promise. However, limitations hinder sustained treatment and recycling under varying light conditions. This comprehensive review delves into the novel paradigm of metal and non-metal doping to overcome these challenges. It begins by discussing the fundamental principles of photocatalysis and its inherent limitations. Understanding these constraints is crucial for developing effective strategies. Band gap narrowing by metal and non-metal doping modifies the band gap, enabling visible-light absorption. Impurity energy levels and oxygen vacancies influenced the doping energy levels and surface defects. Interfacial electron transfer and charge carrier recombination are the most important factors that impact overall efficiency. The comparative analysis of nanomaterials are reviewed on various, including nanometal oxides, nanocarbon materials, and advanced two-dimensional structures. The synthesis process are narratively presented, emphasizing production yields, selectivity, and efficiency. The review has potential applications in the environment for efficient pollutant removal and water purification, economic cost-effective and scalable production and technological advancement catalyst design, in spite of its challenges in material stability, synthesis methods and optimizing band gaps. The novelty of the review paper is on the proposal of a new paradigm of heterojunctions of doped metal and non-metal photocatalysts to promise highly efficient water treatment. This review bridges the gap between fundamental research and practical applications, offering insights into tailored nano photocatalysts.

Integrated p-n/Schottky junctions for efficient photocatalytic hydrogen evolution upon Cu@TiO2-Cu2O ternary hybrids with steering charge transfer

Solar-driven photocatalytic H₂ evolution could tackle the issue of fossil fuels-triggered greenhouse gas emission with sustainable clean energy. However, splitting water into hydrogen with high performance by a single semiconductor is challenging because of the poor charge separation efficiency. Herein, a novel ternary Cu@TiO₂-Cu₂O hybrid photocatalyst with multiple charge transfer channels has been designed for efficient solar-to-hydrogen evolution. Indeed, the ternary Cu@TiO₂-Cu₂O hybrid by coupling Cu@TiO₂ with Cu₂O nanoparticles shows highly-efficient photocatalytic hydrogen generation with rate of 12000.6 μmol·g^-1·h^-1, which is 4.4, 2.1, and 1.9 times higher than the pure TiO₂ (2728.8 μmol·g^-1·h^-1), binary Cu@TiO₂ (5595.5 μmol·g^-1·h^-1), and TiO₂-Cu₂O (6076.8 μmol·g^-1·h^-1) composite, respectively. In such a Cu@TiO₂-Cu₂O hybrid, the formed internal electric field in the TiO₂-Cu₂O p-n junction allows the electrons in Cu₂O to migrate to TiO₂, while the electrons in the CB of TiO₂ could flow into Cu via the Schottky junction at the Cu@TiO₂ interface. In this regard, a multiple charge transfer is achieved between the Cu@TiO₂ and Cu₂O, which facilitates promoted charge separation and results in the construction of electron-accumulated center (Cu) and hole-enriched surface (Cu₂O). This p-n/Schottky junctions with steered charge transfer assists the hydrogen production upon the Cu@TiO₂-Cu₂O ternary photocatalyst.

Safe-and-Sustainable-by-Design Framework Based on a Prospective Life Cycle Assessment: Lessons Learned from a Nano-Titanium Dioxide Case Study

Safe-and-sustainable-by-design (SSbD) is a concept that takes a systems approach by integrating safety, sustainability, and functionality throughout a product's the life cycle. This paper proposes a framework based on a prospective life cycle assessment for early safety and sustainability assessment. The framework's purpose is to identify environmental sustainability and toxicity hotspots early in the innovation process for future SSbD applicability. If this is impossible, key performance indicators are assessed. Environmental sustainability aspects, such as global warming potential (GWP) and cumulative energy demand (CED), and toxicity aspects, such as human toxicity potential and freshwater ecotoxicity potential, were assessed upon applying the framework on a case study. The case study regarded using nano-titanium dioxide (P25-TiO2) or a modified nano-coated version (Cu2O-coated/P25-TiO2) as photocatalysts to produce hydrogen from water using sunlight. Although there was a decrease in environmental impact (GWP and CED), the modified nano-coated version had a relatively higher level of human toxicity and freshwater eco-toxicity. For the presented case study, SSbD alternatives need to be considered that improve the photocatalytic activity but are not toxic to the environment. This case study illustrates the importance of performing an early safety and environmental sustainability assessment to avoid the development of toxic alternatives.

C. SS, Bajiri MA, Drmosh QAQ, Krishnappagowda LN, Ananda S. Rational design of 2D TiO2-MoO3 Step-scheme heterostructure for boosted photocatalytic overall water splitting

Designing of step-scheme (S-scheme) heterostructure photocatalyst is a promising strategy for the high utilization of photogenerated charge carriers. Herein, a novel S-scheme two-dimensional (2D) TiO2-MoO3 heterojunction photocatalyst is fabricated by...

Ration design of 0D/3D Sn3O4/NiS nanocomposite for enhanced photocatalytic hydrogen generation

Developing economic and high-performance noble-metal-free photocatalysts is the key to realize efficient photocatalysis. In this work, NiS nanoparticles and hierarchical Sn3O4 nanostructures are tightly bonded by a two-step method combining...

Influence of Anatase-Rutile Ratio on Band Edge Position and Defect States of TiO2 Homojunction Catalyst

Removal of toxic air and water dissociation in the environment has become a major challenging issue throughout the world. Mixed phase rutile-anatase titanium dioxide catalysts are very effective in photocatalysis and have been studied extensively. However, the mechanism causing this effect and band alignment of the two phases are not fully understood. Pointing to the issue, we have designed one-dimensional mixed-phase TiO₂ and introduced defects near the valence band. Experimental results showed that band alignment between two phases, up-shift of the band edge, and optimum anatase percentage play a key role in the enhancement of the photocatalytic activity. We predicted shifts in band edge originating from surface electric dipole layer induced by defects.

Turbulence enhanced ferroelectric-nanocrystal-based photocatalysis in urchin-like TiO2/BaTiO3 microspheres for hydrogen evolution

The application of a built-in electric field due to piezoelectric potential is one of the most efficient approaches for photo-induced charge transport and separation. However, the efficiency of converting mechanical energy to chemical energy is still very low, and the enhancement of photocatalysis, thus, is limited. To overcome this problem, here, we propose sonophotocatalysis based on a new hybrid photocatalyst, which combines ferroelectric nanocrystals (BaTiO3) and dendritic TiO2 to form an urchin-like TiO2/BaTiO3 hybrid photocatalyst. Under periodic ultrasonic excitation, a spontaneous polarization potential of BaTiO3 nanocrystals in response to ultrasonic waves can act as an alternating built-in electric field to separate photoinduced carriers incessantly, which can significantly enhance the photocatalytic activity and cyclic performance of the urchin-like TiO2/BaTiO3 catalyst. More importantly, the significant enhancement of photocatalytic hydrogen evolution is due to the coupling effect of two types of piezoelectric potential in the presence of BaTiO3 nanocubes as well as the semiconductor and optical properties of TiO2 nanowires of the urchin-like TiO2/BaTiO3 hybrid structure under simulated sunlight and periodic ultrasonic irradiation, which can significantly improve the efficiency of converting mechanical energy to chemical energy.

Prospects of Synthesized Magnetic TiO2-Based Membranes for Wastewater Treatment: A Review

Global accessibility to clean water has stressed the need to develop advanced technologies for the removal of toxic organic and inorganic pollutants and pathogens from wastewater to meet stringent discharge water quality limits. Conventionally, the high separation efficiencies, relative low costs, small footprint, and ease of operation associated with integrated photocatalytic-membrane (IPM) technologies are gaining an all-inclusive attention. Conversely, photocatalysis and membrane technologies face some degree of setbacks, which limit their worldwide application in wastewater settings for the treatment of emerging contaminants. Therefore, this review elucidated titanium dioxide (TiO2), based on its unique properties (low cost, non-toxicity, biocompatibility, and high chemical stability), to have great potential in engineering photocatalytic-based membranes for reclamation of wastewater for re-use. The environmental pathway of TiO2 nanoparticles, membranes and configuration types, modification process, characteristics, and applications of IPMs in water settings are discussed. Future research and prospects of magnetized TiO2-based membrane technology is highlighted as a viable water purification technology to mitigate fouling in the membrane process and photocatalyst recoverability. In addition, exploring life cycle assessment research would also aid in utilizing the concept and pressing for large-scale application of this technology.

Rational construction of Ni(OH)2 nanoparticles on covalent triazine-based framework for artificial CO2 reduction

Artificial photoreduction of CO₂ to chemical fuel is an intriguing and reliable strategy to tackle the issues of energy crisis and climate change simultaneously. In the present study, we rationally constructed a Ni(OH)₂-modified covalent triazine-based framework (CTF-1) composites to serve as cocatalyst ensemble for superior photoreduction of CO₂. In particular, the optimal Ni(OH)₂-CTF-1 composites (loading ratio at 0.5 wt%) exhibited superior photocatalytic activity, which surpassed the bare CTF-1 by 33 times when irradiated by visible light. The mechanism for the enhancement was systematically investigated based on various instrumental analyses. The origin of the superior activity was attributable to the enhanced CO₂ capture, more robust visible-light response, and improved charge carrier separation/transfer. This study offers an innovative pathway for the fabrication of noble-metal-free cocatalysts on CTF semiconductors and deepens the understanding of photocatalytic CO₂ reduction.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Recent Developments of TiO2-Based Photocatalysis in the Hydrogen Evolution and Photodegradation: A Review

The growth of industrialization, which is forced to use non-renewable energy sources, leads to an increase in environmental pollution. Therefore, it is necessary not only to reduce the use of fossil fuels to meet energy needs but also to replace it with cleaner fuels. Production of hydrogen by splitting water is considered one of the most promising ways to use solar energy. TiO₂ is an amphoteric oxide that occurs naturally in several modifications. This review summarizes recent advances of doped TiO₂-based photocatalysts used in hydrogen production and the degradation of organic pollutants in water. An intense scientific and practical interest in these processes is aroused by the fact that they aim to solve global problems of energy conservation and ecology.