Amorphous nanomaterials in electrocatalytic water splitting

Phosphorus-doped nickel cobalt oxide (NiCo2O4) wrapped in 3D hierarchical hollow N-doped carbon nanoflowers as highly efficient bifunctional electrocatalysts for overall water splitting

Properly design and fabricate capable electrocatalysts with 3D hierarchical hollow framework to realize cost-effective and efficacious overall water splitting (OWS) are particularly meaningful for the large-scale arrangement of pivotal energy technology. In this study, P-doped NiCo2O4 nanoparticles encapsulated in N-doped carbon hierarchical hollow nanoflowers (P-NiCo2O4@NCHHNFs) were constructed using the hydrothermal-pyrolysis-phosphorization approach. This fascinating architecture can not merely serve as a conductive pathway for electron transfer, but at the same time effectively inhibited the aggregation and corrosion of the NiCo2O4 nanoparticles. Additionally, the P doping not only regulates electronic structure configuration to boost the intrinsic activity of the catalyst, but also enhance electrochemical surface areas to reveal more accessible active sites. Attributing to these characteristics, the as-prepared P-NiCo2O4@NCHHNFs exhibit preeminent electrocatalytic performance with low overpotentials of 283 mV and 162 mV for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) (at 10 mA cm-2), respectively. Specifically, by using the P-NiCo2O4@NCHHNFs as bifunctional catalysts, a low potential of 1.56 V (at 10 mA cm-2) is sufficient to drive overall water splitting with splendid durability. This study proposed an innovative strategy for the conceiving and fabricating high-performance catalysts via heteroatom-doping.

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 μmol h-1, surpassing both low crystallinity (8.24 μmol h-1) and high crystallinity MoSe2 (3.86 μmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

CoFeBP Micro Flowers (MFs) for Highly Efficient Hydrogen Evolution Reaction and Oxygen Evolution Reaction Electrocatalysts

Hydrogen is one of the most promising green energy alternatives due to its high gravimetric energy density, zero-carbon emissions, and other advantages. In this work, a CoFeBP micro-flower (MF) electrocatalyst is fabricated as an advanced water-splitting electrocatalyst by a hydrothermal approach for hydrogen production with the highly efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The fabrication process of the CoFeBP MF electrocatalyst is systematically optimized by thorough investigations on various hydrothermal synthesis and post-annealing parameters. The best optimized CoFeBP MF electrode demonstrates HER/OER overpotentials of 20 mV and 219 mV at 20 mA/cm2. The CoFeBP MFs also exhibit a low 2-electrode (2-E) cell voltage of 1.60 V at 50 mA/cm2, which is comparable to the benchmark electrodes of Pt/C and RuO2. The CoFeBP MFs demonstrate excellent 2-E stability of over 100 h operation under harsh industrial operational conditions at 60 °C in 6 M KOH at a high current density of 1000 mA/cm2. The flower-like morphology can offer a largely increased electrochemical active surface area (ECSA), and systematic post-annealing can lead to improved crystallinity in CoFeBP MFs.

Grafting Ultra-fine Nanoalloys with Amorphous Skin Enables Highly Active and Long-lived Acidic Hydrogen Production

Large-scale deployment of proton exchange membranes water electrolysis (PEM-WE) requires a substantial reduction in usage of platinum group metals (PGMs) as indispensable electrocatalyst for cathodic hydrogen evolution reaction (HER). Ultra-fine PGMs nanocatalysts possess abundant catalytic sites at lower loading, but usually exhibit reduced stability in long-term operations under corrosive acidic environments. Here we report grafting the ultra-fine PtRu crystalline nanoalloys with PtxRuySez "amorphous skin" (c-PtRu@a-PtxRuySez) by in situ atomic layer selenation to simultaneously improve catalytic activity and stability. We found that the c-PtRu@a-PtxRuySez-1 with ~0.6 nm thickness amorphous skin achieved an ultra-high mass activity of 26.7 A mg-1 Pt+Ru at -0.07 V as well as a state-of-the-art durability maintained for at least 1000 h at -10 mA cm-2 and 550 h at -100 mA⋅cm-2 for acid HER. Experimental and theoretical investigations suggested that the amorphous skin not only improved the electrochemical accessibility of the catalyst surface and increasing the intrinsic activity of the catalytic sites, but also mitigated the dissolution/diffusion of the active species, thus resulting in improved catalytic activity and stability under acidic electrolyte. This work demonstrates a direction of designing ultra-fine PGMs electrocatalysts both with high utilization and robust durability, offers an in situ "amorphous skin" engineering strategy.

Remodeling the Electronic Structure of Metallic Nickel and Ruthenium via Alloying in a Molecular Template for Sustainable Hydrogen Evolution

The reasonably constructed high-performance electrocatalyst is crucial to achieve sustainable electrocatalytic water splitting. Alloying is a prospective approach to effectively boost the activity of metal electrocatalysts. However, it is a difficult subject for the controllable synthesis of small alloying nanostructures with high dispersion and robustness, preventing further application of alloy catalysts. Herein, we propose a well-defined molecular template to fabricate a highly dispersed NiRu alloy with ultrasmall size. The catalyst presents superior alkaline hydrogen evolution reaction (HER) performance featuring an overpotential as low as 20.6 ± 0.9 mV at 10 mA·cm-2. Particularly, it can work steadily for long periods of time at industrial-grade current densities of 0.5 and 1.0 A·cm-2 merely demanding low overpotentials of 65.7 ± 2.1 and 127.3 ± 4.3 mV, respectively. Spectral experiments and theoretical calculations revealed that alloying can change the d-band center of both Ni and Ru by remodeling the electron distribution and then optimizing the adsorption of intermediates to decrease the water dissociation energy barrier. Our research not only demonstrates the tremendous potential of molecular templates in architecting highly active ultrafine nanoalloy but also deepens the understanding of water electrolysis mechanism on alloy catalysts.

Multi-metal electrocatalyst with crystalline/amorphous structure for enhanced alkaline water/seawater hydrogen evolution

The development of well-defined nanomaterials as non-noble metal electrocatalysts has broad application prospect for hydrogen generation technology. Recently, multi-metal electrocatalysts for hydrogen evolution reaction (HER) have attracted extensive attention due to their high catalytic performance arising from the synergistic effect of multi-metal interaction. However, most multi-metal catalysts suffer from the limited synergistic effect because of poor interfacial compatibility between different components. Here, a novel multi-metal catalyst (Ni/MoO2@CoFeOx) nanosheet with a crystalline/amorphous structure is demonstrated, which shows high HER activity. Ni/MoO2@CoFeOx exhibits an ultra-low overpotential of 18, 39, and 93 mV at 10 mA cm-2 in alkaline water, alkaline seawater and natural seawater, respectively, which outperformances most of the state-of-the-art non-noble metal compounds. In addition, the catalyst shows exceptional stability under 500 mA cm-2 in alkaline solution. In-situ Raman and other advanced structural characterization confirms the excellent catalytic activity is mainly contributed by: (1) the strong synergistic effect of multi-metal components provides multiple active sites in the catalytic process; (2) the crystalline/amorphous interface in Ni/MoO2@CoFeOx boosts the catalytically active sites and structure stability; (3) the crystalline phase enhances the intrinsic conductivity greatly; and (4) the amorphous phase provides abundant unsaturated sites for improved intrinsic catalytic activity. This work provides a feasible way to design electrocatalyst with high activity and stability for practical applications.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

In-Site Grown NiFeOOH Nanosheets Foam Directly as Robust Electrocatalyst for Efficient Urea Oxidation Application

In this work, a series of morphology-controlled NiFeOOH nanosheets were directly developed through a one-step mild in-situ acid-etching hydrothermal process. Benefiting from the ultrathin interwoven geometric structure and most favorable electron transport structure, the NiFeOOH nanosheets synthesized under 120 °C (denoted as NiFe_120) exhibited the optimal electrochemical performance for urea oxidation reaction (UOR). An overpotential of merely 1.4 V was required to drive the current density of 100 mA cm-2 , and the electrochemical activity remains no change even after 5000 cycles' accelerated degradation test. Moreover, the assembled urea electrolysis set by using the NiFe_120 as bifunctional catalysts presented a reduced potential of 1.573 V at 10 mA cm-2 , which was much lower than that of overall water splitting. We believe this work will lay a foundation for developing high-performance urea oxidation catalysts for the large-scale production of hydrogen and purification of urea-rich sewage.

Recent Advances in Phase-Engineered Photocatalysts: Classification and Diversified Applications

Phase engineering is an emerging strategy for tuning the electronic states and catalytic functions of nanomaterials. Great interest has recently been captured by phase-engineered photocatalysts, including the unconventional phase, amorphous phase, and heterophase. Phase engineering of photocatalytic materials (including semiconductors and cocatalysts) can effectively affect the light absorption range, charge separation efficiency, or surface redox reactivity, resulting in different catalytic behavior. The applications for phase-engineered photocatalysts are widely reported, for example, hydrogen evolution, oxygen evolution, CO₂ reduction, and organic pollutant removal. This review will firstly provide a critical insight into the classification of phase engineering for photocatalysis. Then, the state-of-the-art development of phase engineering toward photocatalytic reactions will be presented, focusing on the synthesis and characterization methodologies for unique phase structure and the correlation between phase structure and photocatalytic performance. Finally, personal understanding of the current opportunities and challenges of phase engineering for photocatalysis will also be provided.

Ultrafast synthesis of halogen-doped Ru-based electrocatalysts with electronic regulation for hydrogen generation in acidic and alkaline media

Developing a facile and time-saving method for preparing hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts can accelerate the practical applications of hydrogen energy. In this study, halogen (X = F, Cl, Br and I) doped Ru-RuO₂ on carbon cloth (CC) (X-Ru-RuO₂/MCC) was synthesized via an ultrafast microwave-assisted method for 30 s. Particularly, the doped Br (Br-Ru-RuO₂/MCC) significantly improved the electrocatalytic performances of the catalyst through the regulation of electronic structures. Then, the Br-Ru-RuO₂/MCC catalyst featured HER overpotentials of 44 mV and 77 mV in 1.0 M KOH and 0.5 M H₂SO₄, and the OER overpotential of 300 mV at 10 mA cm^-2 in 1.0 M KOH. This study provides a novel method for developing of halogen-doped catalysts.

Engineering Amorphous/Crystalline Ru(OH)3/CoFe-Layered Double Hydroxide for Hydrogen Evolution at 1000 mA cm-2

For large-scale industrial applications, it is highly desirable to create effective, economical electrocatalysts with long-term stability for the hydrogen evolution reaction (HER) at a large current density. Herein, we report a unique motif with crystalline CoFe-layered hydroxide (CoFe-LDH) nanosheets enclosed by amorphous ruthenium hydroxide (a-Ru(OH)₃/CoFe-LDH) to realize the efficient hydrogen production at 1000 mA cm^-2, with a low overpotential of 178 mV in alkaline media. During the continuous HER process for 40 h at such a large current density, the potential remains almost constant with only slight fluctuations, indicating good long-term stability. The remarkable HER performance can be attributed to the charge redistribution caused by abundant oxygen vacancies in a-Ru(OH)₃/CoFe-LDH. The increased electron density of states lowers the charge-transfer resistance and promotes the formation and release of H₂ molecules. The water-splitting electrolyzer with a-Ru(OH)₃/CoFe-LDH as both an anode and a cathode in 1.0 M KOH demonstrates stable hydrogen production and a 100% faradic efficiency. The design strategy of interface engineering in this work will inspire the design of practical electrocatalysts for water splitting on an industrial scale.

Sea urchin-like amorphous MgNiCo mixed metal hydroxide nanoarrays for efficient overall water splitting under industrial electrolytic conditions

Exploring amorphous mixed transition metal hydroxide electrocatalysts with high performance and stability for overall water splitting is a difficult challenge under industrial electrolytic conditions. Herein, a sea urchin-like amorphous MgNiCo hydroxide (Mg_xNi_1-xCo-OH, 0 < x < 1), self-assembled from nanowire arrays, is synthesized by the hydrothermal process. The synergistic effect between Mg and Ni/Co adjusts their crystal structure and morphology, which can improve the inherent activity and provide more active sites. Benefiting from the favorable structural features, Mg_0.5Ni_0.5Co-OH exhibits superior electrocatalytic oxygen and hydrogen evolution reaction (OER and HER) activity with a low overpotential of 277 and 110 mV (10 mA cm^-2) in 1 M KOH at 25 °C. Furthermore, overpotentials of 239 and 197 mV are required to achieve a current density of 50 mA cm^-2 for the OER and HER under simulated industrial electrolysis conditions (5 M KOH at 65 °C). Notably, Mg_0.5Ni_0.5Co-OH remarkably accelerates water splitting with a low voltage of 1.938 and 1.699 V for 50 mA cm^-2 in 1 M KOH at 25 °C and 5 M KOH at 65 °C, respectively. This work presents a novel amorphous strategy to design and construct sea urchin-like mixed metal hydroxide bifunctional efficient electrocatalysts for industrial applications.

A Metal-Organic Frameworks Derived 1T-MoS2 with Expanded Layer Spacing for Enhanced Electrocatalytic Hydrogen Evolution

Metal phase molybdenum disulfide (1T-MoS₂ ) is considered a promising electrocatalyst for hydrogen evolution reaction (HER) due to its activated basal and superior electrical conductivity. Here, a one-step solvothermal route is developed to prepare 1T-MoS₂ with expanded layer spacing through the derivatization of a Mo-based organic framework (Mo-MOFs). Benefiting from N,N-dimethylformamide oxide as external stress, the interplanar spacing of (002) of the MoS₂ catalyst is extended to 10.87 Å, which represents the largest one for the 1T-MoS₂ catalyst prepared by the bottom-up approach. Theoretical calculations reveal that the expanded crystal planes alter the electronic structure of 1T-MoS₂ , lower the adsorption-desorption potentials of protons, and thus, trigger efficient catalytic activity for HER. The optimal 1T-MoS₂ catalyst exhibits an overpotential of 98 mV at 10 mA cm^-2 for HER, corresponding to a Tafel slope of 52 mV dec^-1 . This Mo-MOFs-derived strategy provides a potential way to design high-performance catalysts by adjusting the layer spacing of 2D materials.

Co2P/CoP quantum dots surface heterojunction derived from amorphous Co3O4 quantum dots for efficient photocatalytic H2 production

Amorphous/crystalline heterostructures show excellent potential in the hydrogen evolution reaction (HER) as they can significantly facilitate surface adsorption and redox reactions. Herein, a unique amorphous Co₂P/crystalline CoP quantum dots (Co₂P/CoP QDs) Type-II surface heterojunction was derived from amorphous Co₃O₄ QDs via phosphorization. The intimate contact between Co₂P QDs and CoP QDs was conducive to charge transfer, thereby promoting surface reaction kinetics. The unique structure and properties were beneficial to providing more active sites and controlling the electronic structures thus making amorphous/crystalline composites show superior photocatalytic hydrogen (H₂) production performance. Additionally, the amorphous Co₂P QDs had a plethora of unsaturated bonds and abundant defects; the disordered structure led to increased active sites that promoted surface reaction kinetics. Due to the synergistic effect of the quantum confinement of QDs and the surface heterojunction, the charge transfer efficiency of Co₂P/CoP QDs was extremely high, and high H₂ evolution activity and photostability were achieved. The maximum H₂ generation rate over the Co₂P/CoP QDs composite reached 11.88 mmol h^-1 g^-1 with an apparent quantum efficiency (AQE) of 3.88 % at 420 nm, which is roughly 20-times that of the pure Co₃O₄ QDs. In addition, high photostability was realized; even the photocatalyst that stood for a week reached initial photoactivity. This work offers a novel idea for reasonably establishing amorphous/crystalline photocatalysts to achieve efficient H₂ evolution.

Construction of MnxCoyO4/Ti electrocatalysts for efficient bifunctional water splitting

In this work, we report the design and synthesis of non-noble metal-based electrocatalysts for effective overall water splitting in alkaline solutions for the development of hydrogen energy. The electrocatalysts were synthesized by a one-step hydrothermal method similar to microflower structure electrocatalysts. The synergistic effect between the special Echinops sphaerocephalus nanostructure and the nanowire can greatly improve the conductivity of the nanomaterial due to its high activity quality, fast ion transport, and exposure of more active sites, thus resulting in a better catalytic activity and a longer material stability of the electrocatalyst. For Mn_xCo_yO₄/Ti in alkaline aqueous solutions, a current density of 10 mA cm^-2 is required when the voltage is only 1.60 V. In addition, the hydrogen evolution activity of electrocatalysts is 168 mV at 10 mA cm^-2, the Tafel slope is 174 mV dec^-1, and the oxygen evolution activity of electrocatalysts is 229 mV at 10 mA cm^-2, which showed good long-term stability within 12 h, even better than that of previously reported electrocatalysts.

Ultrafast Carbothermal Shock Constructing Ni3Fe1-xCrx Intermetallic Integrated Electrodes for Efficient and Durable Overall Water Splitting

The development of the electrocatalyst-integrated electrodes with HER/OER bifunctional activity is desirable to reduce the cost and simplify the system of the practical water electrolyzers. Herein, we construct a new type of Ni₃Fe_1-xCr_x (0 ≤ x < 0.3) intermetallic integrated electrodes for overall water splitting via an ultrafast carbothermal shock method. The obtained Ni₃Fe_0.9Cr_0.1/CACC electrode exhibits the optimum performance among all developed electrocatalyst electrodes in this work, and the overpotential is merely 239 mV for OER and 128 mV for HER at 10 mA cm^-2. In addition, the Ni₃Fe_0.9Cr_0.1/CACC electrode shows excellent durability during both OER and HER stability tests at a high current density of 100 mA cm^-2. An electrolyzer, which was assembled with Ni₃Fe_0.9Cr_0.1/CACC electrodes as both the anode and cathode, operates with a low cell voltage of 1.59 V at 10 mA cm^-2. It has been found that the impressive OER activity of Ni₃Fe_0.9Cr_0.1 nanoparticles (NPs) can be ascribed to the stimulative formation of the OER-active Ni³⁺/Fe³⁺ species by the substituted Cr, while the enhanced HER activity is caused by the Cr substitution, which decreases the water dissociation energy barrier. This work provides an ultrafast and facile strategy to develop electrocatalyst-integrated electrodes with low cost and impressive HER/OER bifunctional performance for overall water splitting.

Crystalline-Amorphous Interfaces Coupling of CoSe2 /CoP with Optimized d-Band Center and Boosted Electrocatalytic Hydrogen Evolution

Amorphous and heterojunction materials have been widely used in the field of electrocatalytic hydrogen evolution due to their unique physicochemical properties. However, the current used individual strategy still has limited effects. Hence efficient tailoring tactics with synergistic effect are highly desired. Herein, the authors have realized the deep optimization of catalytic activity by a constructing crystalline-amorphous CoSe₂ /CoP heterojunction. Benefiting from the strong electronic coupling at the interfaces, the d-band center of the material moves further down compared to its crystalline-crystalline counterpart, optimizing the valence state and the H adsorption of Co and lowering the kinetic barrier of hydrogen evolution reaction (HER). The heterojunction shows an overpotential of 65 mV to drive a current density of 10 mA cm^-2 in the acidic medium. Besides, it also shows competitive properties in both neutral and basic media. This work provides inspiration for optimizing the catalytic activity through combining a crystalline and amorphous heterojunction, which can be implemented for other transition metal compound electrocatalysts.

Alkali-Induced In Situ Formation of Amorphous NixFe1-x(OH)2 from a Linear [M3(COO)6]-Based MOF Template for Overall Electrochemical Water Splitting

Amorphous and bifunctional electrocatalysts based on 3d transition metals tend to exhibit better performance than their crystalline counterparts and are a promising choice for efficient overall water splitting yet far from being well explored. A 3,6-net metal-organic framework (MOF) of [Ni₃(bpt)₂(DMF)₂(H₂O)₂]·1.5DMF (Ni-MOF), based on linear [Ni₃(COO)₆] as a node and [1,1'-biphenyl]-3,4',5-tricarboxylic acid (H₃bpt) as a linker, was conveniently prepared via a hydrothermal reaction. Benefitting from the wide compatibility of the octahedral coordination geometry in Ni-MOF for different 3d metal ions, the molecular level and controllable metal doping facilitates the production of the desired Ni/Fe bimetallic MOF. A high-concentration alkali solution of 1 M KOH induced the in situ transformation of the MOF as a precursor to new amorphous electrocatalysts of [Ni(OH)₂(H₂O)_0.6]·H₂O [a-Ni(OH)₂] and its metal-doped derivatives of a-Ni_0.77Fe_0.23(OH)₂ and a-Ni_0.65Fe_0.35(OH)₂. In particular, the costly organic ligand H₃bpt was fully dissolved in the alkaline solution and can be recovered for cyclic utilization by subsequent acidification. The obtained amorphous hydroxide was deduced to be loose and defective layers containing both coordinated and lattice water based on combined characterizations of TG, IR, Raman, XPS, and sorption analysis. As opposed to the crystalline counterpart of Ni(OH)₂ with stacked packing layers and an absent lattice water, the abundant catalytic active sites of the amorphous electrocatalyst endow good performance in both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The bifunctional a-Ni_0.65Fe_0.35(OH)₂ coated on nickel foam realizes small overpotentials of 247 and 99 mV for OER and HER, respectively, under a current density of 10 mA cm^-2, which can work with a cell voltage of merely 1.60 V for overall water splitting. This study provides an efficient strategy for widely screening and preparing new functional amorphous materials for electrocatalytic application.

Synergistic mechanism of Ni(OH)2/NiMoS heterostructure electrocatalyst with crystalline/amorphous interfaces for efficient hydrogen evolution over all pH ranges

Designing and fabricating efficient electrocatalysts is a practical step toward the commercial application of the efficient hydrogen evolution reaction (HER) over all pH ranges. Herein, novel Ti@Ni(OH)₂-NiMoS heterostructure with interface between crystalline Ni(OH)₂ and amorphous NiMoS was rationally designed and fabricated on Ti mesh (denoted as Ti@Ni(OH)₂-NiMoS). Acid etching and calcination experiments helped in accurate elucidation of the synergistic mechanism as well as the vital role on crystalline Ni(OH)₂ and amorphous NiMoS. In acidic solutions, the HER performance of Ti@Ni(OH)₂-NiMoS was mainly attributed to the amorphous NiMoS. In neutral, alkaline, and natural seawater solutions, the HER performance was mainly determined by the synergistic interface behaviors between the Ni(OH)₂ and NiMoS. The crystalline Ni(OH)₂ accelerated water dissociation kinetics, while the amorphous NiMoS provided abundant active sites and allowed for fast electron transfer rates. To deliver current densities of 10 mA·cm^-2 in acidic, neutral, alkaline, and natural seawater solutions, the Ti@Ni(OH)₂-NiMoS required overpotentials of 138, 198, 180 and 371 mV, respectively. This paper provides general guidelines for designing efficient electrocatalyst with crystalline/amorphous interfaces for efficient hydrogen evolution over all-pH ranges.

Double-wall carbon nanotube assisted phase engineering in CoOxSy complex for efficient oxygen evolution reaction

Sluggish electron kinetics in oxygen evolution reaction (OER) is one of the main factors restricting the development of hydrogen production technology from electrical water splitting, while the key to break...

MOF-derived ruthenium-doped amorphous molybdenum dioxide hybrid for highly efficient hydrogen evolution reaction in alkaline media

Ruthenium-doped amorphous molybdenum dioxide coupled with a reduced graphene oxide hybrid (Ru-MoO₂@PC/rGO) is synthesized using polyoxometalate-based MOFs/GO as a precursor. Benefitting from the synergistic effect of numerous exposed active sites, Ru dopants and the introduction of GO, the designed catalyst shows exceptional electrocatalytic performance toward the HER in alkaline media.

Ordered Vacancies on the Body-Centered Cubic PdCu Nanocatalysts

Defect engineering has become one of the important considerations in today's electrocatalyst design. However, the vacancies in the ordered crystal structure (especially body-centered cubic (bcc) and the effect of ordered vacancies (OVs) on the electronic fabric have not been researched yet. In this work, we report the inaugural time of the generation of OVs in the bcc architecture and discuss the insight of the modulation system of the material and its part in the electrochemical N₂ reduction reaction (NRR). OV-PdCu-2 achieves the highest Faradaic efficiency value of 21.5% at 0.05 V versus RHE. When the potential increases to 0 V versus RHE, the highest ammonia yield is 55.54 μg h^-1 mg_cat^-1, which is significantly better than the unetched PdCu nanoparticles (12.83 μg h^-1 mg_cat^-1). It is the latest reported catalyst to date in the NRR process at 0 V versus RHE (see Supporting Information).