Decoding the mechanical fingerprints of biomolecules

Uncovering and engineering the mechanical properties of the adhesion GPCR ADGRG1 GAIN domain

Key cellular functions depend on the transduction of extracellular mechanical signals by specialized membrane receptors including adhesion G-protein coupled receptors (aGPCRs). While recently solved structures support aGPCR activation through shedding of the extracellular GAIN domain, the molecular mechanisms underpinning receptor mechanosensing remain poorly understood. When probed using single-molecule atomic force spectroscopy and molecular simulations, ADGRG1 GAIN dissociated from its tethered agonist at forces significantly higher than other reported signaling mechanoreceptors. Strong mechanical resistance was achieved through specific structural deformations and force propagation pathways under mechanical load. ADGRG1 GAIN variants computationally designed to lock the alpha and beta subdomains and rewire mechanically-induced structural deformations were found to modulate the GPS-Stachel rupture forces. Our study provides unprecedented insights into the molecular underpinnings of GAIN mechanical stability and paves the way for engineering mechanosensors, better understanding aGPCR function, and informing drug-discovery efforts targeting this important receptor class.

Optimal Sacrificial Domains in Mechanical Polyproteins: S. epidermidis Adhesins Are Tuned for Work Dissipation

The opportunistic pathogen Staphylococcus epidermidis utilizes a multidomain surface adhesin protein to bind host components and adhere to tissues. While it is known that the interaction between the SdrG receptor and its fibrinopeptide target (FgB) is exceptionally mechanostable (∼2 nN), the influence of downstream B domains (B1 and B2) is unclear. Here, we studied the mechanical relationships between folded B domains and the SdrG receptor bound to FgB. We used protein engineering, single-molecule force spectroscopy (SMFS) with an atomic force microscope (AFM), and Monte Carlo simulations to understand how the mechanical properties of folded sacrificial domains, in general, can be optimally tuned to match the stability of a receptor-ligand complex. Analogous to macroscopic suspension systems, sacrificial shock absorber domains should neither be too weak nor too strong to optimally dissipate mechanical energy. We built artificial molecular shock absorber systems based on the nanobody (VHH) scaffold and studied the competition between domain unfolding and receptor unbinding. We quantitatively determined the optimal stability of shock absorbers that maximizes work dissipation on average for a given receptor and found that natural sacrificial domains from pathogenic S. epidermidis and Clostridium perfringens adhesins exhibit stabilities at or near this optimum within a specific range of loading rates. These findings demonstrate how tuning the stability of sacrificial domains in adhesive polyproteins can be used to maximize mechanical work dissipation and serve as an adhesion strategy by bacteria.

Collective mechanical responses of cadherin-based adhesive junctions as predicted by simulations

Cadherin-based adherens junctions and desmosomes help stabilize cell-cell contacts with additional function in mechano-signaling, while clustered protocadherin junctions are responsible for directing neuronal circuits assembly. Structural models for adherens junctions formed by epithelial cadherin (CDH1) proteins indicate that their long, curved ectodomains arrange to form a periodic, two-dimensional lattice stabilized by tip-to-tip trans interactions (across junction) and lateral cis contacts. Less is known about the exact architecture of desmosomes, but desmoglein (DSG) and desmocollin (DSC) cadherin proteins are also thought to form ordered junctions. In contrast, clustered protocadherin (PCDH)-based cell-cell contacts in neuronal tissues are thought to be responsible for self-recognition and avoidance, and structural models for clustered PCDH junctions show a linear arrangement in which their long and straight ectodomains form antiparallel overlapped trans complexes. Here, we report all-atom molecular dynamics simulations testing the mechanics of minimalistic adhesive junctions formed by CDH1, DSG2 coupled to DSC1, and PCDHγB4, with systems encompassing up to 3.7 million atoms. Simulations generally predict a favored shearing pathway for the adherens junction model and a two-phased elastic response to tensile forces for the adhesive adherens junction and the desmosome models. Complexes within these junctions first unbend at low tensile force and then become stiff to unbind without unfolding. However, cis interactions in both the CDH1 and DSG2-DSC1 systems dictate varied mechanical responses of individual dimers within the junctions. Conversely, the clustered protocadherin PCDHγB4 junction lacks a distinct two-phased elastic response. Instead, applied tensile force strains trans interactions directly, as there is little unbending of monomers within the junction. Transient intermediates, influenced by new cis interactions, are observed after the main rupture event. We suggest that these collective, complex mechanical responses mediated by cis contacts facilitate distinct functions in robust cell-cell adhesion for classical cadherins and in self-avoidance signaling for clustered PCDHs.

Using Optical Tweezers to Dissect Allosteric Communication Networks in Protein Kinases

Mutations in protein kinases are often associated with the development of cancer, and application of mutant-specific inhibitors as therapeutic measures have shown a remarkable improvement in prolonging patient survival. However, it has also been observed that tumors bearing certain mutation types are more resistant to current approved drugs. Importantly, many resistant mutations are located in regions outside substrate or inhibitor binding sites, indicating allosteric effects. Understanding how mutations trigger effects over a distant site of the protein requires a deeper investigation of the molecular origin of allosteric regulation networks in kinases. In this chapter, we show the application of single-molecule optical tweezers to selectively manipulate specific regions of proteins to trace allosteric signals, thereby allowing the elucidation of allosteric communication networks. We illustrate this approach using as model system the regulatory subunit of protein kinase A. This single-molecule optical tweezers approach, however, can be readily applicable to study other kinases, and can be further expanded to screen potential allosteric drugs for future therapeutics.

Using Optical Tweezers to Monitor Allosteric Signals Through Changes in Folding Energy Landscapes

Signaling proteins are composed of conserved protein interaction domains that serve as allosteric regulatory elements of enzymatic or binding activities. The ubiquitous, structurally conserved cyclic nucleotide binding (CNB) domain is found covalently linked to proteins with diverse folds that perform multiple biological functions. Given that the structures of cAMP-bound CNB domains in different proteins are very similar, it remains a challenge to determine how this domain allosterically regulates such diverse protein functions and folds. Instead of a structural perspective, we focus our attention on the energy landscapes underlying the CNB domains and their responses to cAMP binding. We show that optical tweezers is an ideal tool to investigate how cAMP binding coupled to interdomain interactions remodel the energy landscape of the regulatory subunit of protein kinase A (PKA), which harbors two CNB domains. We mechanically manipulate and probe the unfolding and refolding behavior of the CNB domains as isolated structures or selectively as part of the PKA regulatory subunit, and in the presence and absence of cAMP. Optical tweezers allows us to dissect the changes in the energy landscape associated with cAMP binding, and to examine the allosteric interdomain interactions triggered by the cyclic nucleotide. This single molecule approach can be used to study other modular, multidomain signaling proteins found in nature.

Entropy production and Onsager reciprocal relations describing the relaxation to equilibrium in stochastic thermodynamics

We study the relation between stochastic thermodynamics and nonequilibrium thermodynamics by evaluating the entropy production and the relation between fluxes and forces in a harmonic system with N particles in contact with N different reservoirs. We suppose that the system is in a nonequilibrium stationary state in a first phase and we study the relaxation to equilibrium in a second phase. During this relaxation, we can identify the linear relation between fluxes and forces satisfying the Onsager reciprocity and we obtain a nonlinear expression for the entropy production. Only when forces and fluxes are small does the entropic production turn into a quadratic form in the forces, as predicted by the Onsager theory.

Force probe simulations using an adaptive resolution scheme

Molecular simulations of the forced unfolding and refolding of biomolecules or molecular complexes allow to gain important kinetic, structural and thermodynamic information about the folding process and the underlying energy landscape. In force probe molecular dynamics (FPMD) simulations, one pulls one end of the molecule with a constant velocity in order to induce the relevant conformational transitions. Since the extended configuration of the system has to fit into the simulation box together with the solvent such simulations are very time consuming. Here, we apply a hybrid scheme in which the solute is treated with atomistic resolution and the solvent molecules far away from the solute are described in a coarse-grained manner. We use the adaptive resolution scheme (AdResS) that has very successfully been applied to various examples of equilibrium simulations. We perform FPMD simulations using AdResS on a well studied system, a dimer formed from mechanically interlocked calixarene capsules. The results of the multiscale simulations are compared to all-atom simulations of the identical system and we observe that the size of the region in which atomistic resolution is required depends on the pulling velocity, i.e. the particular non-equilibrium situation. For large pulling velocities a larger all atom region is required. Our results show that multiscale simulations can be applied also in the strong non-equilibrium situations that the system experiences in FPMD simulations.

Free-energy changes of bacteriorhodopsin point mutants measured by single-molecule force spectroscopy

Single amino acid mutations provide quantitative insight into the energetics that underlie the dynamics and folding of membrane proteins. Chemical denaturation is the most widely used assay and yields the change in unfolding free energy (ΔΔG). It has been applied to >80 different residues of bacteriorhodopsin (bR), a model membrane protein. However, such experiments have several key limitations: 1) a nonnative lipid environment, 2) a denatured state with significant secondary structure, 3) error introduced by extrapolation to zero denaturant, and 4) the requirement of globally reversible refolding. We overcame these limitations by reversibly unfolding local regions of an individual protein with mechanical force using an atomic-force-microscope assay optimized for 2 μs time resolution and 1 pN force stability. In this assay, bR was unfolded from its native bilayer into a well-defined, stretched state. To measure ΔΔG, we introduced two alanine point mutations into an 8-amino-acid region at the C-terminal end of bR's G helix. For each, we reversibly unfolded and refolded this region hundreds of times while the rest of the protein remained folded. Our single-molecule-derived ΔΔG for mutant L223A (-2.3 ± 0.6 kcal/mol) quantitatively agreed with past chemical denaturation results while our ΔΔG for mutant V217A was 2.2-fold larger (-2.4 ± 0.6 kcal/mol). We attribute the latter result, in part, to contact between Val²¹⁷ and a natively bound squalene lipid, highlighting the contribution of membrane protein-lipid contacts not present in chemical denaturation assays. More generally, we established a platform for determining ΔΔG for a fully folded membrane protein embedded in its native bilayer.

Modulation of a protein-folding landscape revealed by AFM-based force spectroscopy notwithstanding instrumental limitations

Single-molecule force spectroscopy is a powerful tool for studying protein folding. Over the last decade, a key question has emerged: how are changes in intrinsic biomolecular dynamics altered by attachment to μm-scale force probes via flexible linkers? Here, we studied the folding/unfolding of α₃D using atomic force microscopy (AFM)-based force spectroscopy. α₃D offers an unusual opportunity as a prior single-molecule fluorescence resonance energy transfer (smFRET) study showed α₃D's configurational diffusion constant within the context of Kramers theory varies with pH. The resulting pH dependence provides a test for AFM-based force spectroscopy's ability to track intrinsic changes in protein folding dynamics. Experimentally, however, α₃D is challenging. It unfolds at low force (<15 pN) and exhibits fast-folding kinetics. We therefore used focused ion beam-modified cantilevers that combine exceptional force precision, stability, and temporal resolution to detect state occupancies as brief as 1 ms. Notably, equilibrium and nonequilibrium force spectroscopy data recapitulated the pH dependence measured using smFRET, despite differences in destabilization mechanism. We reconstructed a one-dimensional free-energy landscape from dynamic data via an inverse Weierstrass transform. At both neutral and low pH, the resulting constant-force landscapes showed minimal differences (∼0.2 to 0.5 k _B T) in transition state height. These landscapes were essentially equal to the predicted entropic barrier and symmetric. In contrast, force-dependent rates showed that the distance to the unfolding transition state increased as pH decreased and thereby contributed to the accelerated kinetics at low pH. More broadly, this precise characterization of a fast-folding, mechanically labile protein enables future AFM-based studies of subtle transitions in mechanoresponsive proteins.

Hidden Intermediate State and Second Pathway Determining Folding and Unfolding Dynamics of GB1 Protein at Low Forces

Atomic force microscopy experiments found that GB1, a typical two-state model protein used for study of folding and unfolding dynamics, can sustain forces of more than 100 pN, but its response to low forces still remains unclear. Using ultrastable magnetic tweezers, we discovered that GB1 has an unexpected nonmonotonic force-dependent unfolding rate at 5-160 pN, from which a free energy landscape with two main barriers and a hidden intermediate state was constructed. A model combining two separate models by Dudko et al. with two pathways between the native state and this intermediate state is proposed to rebuild the unfolding dynamics over the full experimental force range. One candidate of this transient intermediate state is the theoretically proposed molten globule state with a loosely collapsed conformation, which might exist universally in the folding and unfolding processes of two-state proteins.

Rate-dependent force-extension models for single-molecule force spectroscopy experiments

Single-molecule force spectroscopy techniques allow for the measurement of several static and dynamic features of macromolecules of biological origin. In particular, atomic force microscopy, used with a variable pulling rate, provides valuable information on the folding/unfolding dynamics of proteins. We propose here two different models able to describe the out-of-equilibrium statistical mechanics of a chain composed of bistable units. These latter represent the protein domains, which can be either folded or unfolded. Both models are based on the Langevin approach and their implementation allows for investigating the effect of the pulling rate and of the device intrinsic elasticity on the chain unfolding response. The theoretical results (both analytical and numerical) have been compared with experimental data concerning the unfolding of the titin and filamin proteins, eventually obtaining a good agreement over a large range of the pulling rates.

Correcting molecular transition rates measured by single-molecule force spectroscopy for limited temporal resolution

Equilibrium free-energy-landscape parameters governing biomolecular folding can be determined from nonequilibrium force-induced unfolding by measuring the rates k for transitioning back and forth between states as a function of force F. However, bias in the observed forward and reverse rates is introduced by limited effective temporal resolution, which includes the mechanical response time of the force probe and any smoothing used to improve the signal-to-noise ratio. Here we use simulations to characterize this bias, which is most prevalent when the ratio of forward and reverse rates is far from unity. We find deviations in k(F) at high rates, due to unobserved transitions from short- to long-lived states, and at low rates, due to the corresponding unobserved transitions from long- to short-lived states. These missing events introduce erroneous curvature in log(k) vs F that leads to incorrect landscape parameter determination. To correct the measured k(F), we derive a pair of model-independent analytical formulas. The first correction accounts for unobserved transitions from short- to long-lived states, but does surprisingly little to correct the erroneous energy-landscape parameters. Only by subsequently applying the second formula, which corrects the corresponding reverse process, do we recover the expected k(F) and energy-landscape quantities. Going forward, these corrections should be applied to transition-rate data whenever the highest measured rate is not at least an order of magnitude slower than the effective temporal resolution.

Soft mechano-chemistry of molecular hubs in mitotic spindle: biomechanics and mechanical proofreading at microtubule ends

A microtubule (MT) is a long stiff tube-shaped filament formed by a hierarchical organization of a large number of tubulin protein molecules. These filaments constitute a major structural component of the scaffold of a multi-component macromolecular machine called mitotic spindle. The plus ends of the MTs are tethered to some specific binding partners by molecular tethers while those of some others are crosslinked by crosslinking molecules. Because of the non-covalent binding involved in the tethering and crosslinking, the attachments formed are intrinsically 'soft'. These attachments are transient because these can get ruptured spontaneously by thermal fluctuations. By implementing in silico the standard protocols of in vitro molecular force spectroscopy, we compute the lifetimes of simple theoretical models of these attachments. The mean lifetime is essentially a mean first-passage time. The stability of cross-linked antiparallel MTs is shown to decrease monotonically with increasing tension, a characteristic of all 'slip-bonds'. This is in sharp contrast to the nonmonotonic variation of the mean lifetime with tension, a mechanical fingerprint of 'catch-bonds', displayed by the MTs tethered to two distinct binding partners. We mention plausible functional implications of these observations in the context of mechanical proofreading.

Next Generation Methods for Single-Molecule Force Spectroscopy on Polyproteins and Receptor-Ligand Complexes

Single-molecule force spectroscopy with the atomic force microscope provides molecular level insights into protein function, allowing researchers to reconstruct energy landscapes and understand functional mechanisms in biology. With steadily advancing methods, this technique has greatly accelerated our understanding of force transduction, mechanical deformation, and mechanostability within single- and multi-domain polyproteins, and receptor-ligand complexes. In this focused review, we summarize the state of the art in terms of methodology and highlight recent methodological improvements for AFM-SMFS experiments, including developments in surface chemistry, considerations for protein engineering, as well as theory and algorithms for data analysis. We hope that by condensing and disseminating these methods, they can assist the community in improving data yield, reliability, and throughput and thereby enhance the information that researchers can extract from such experiments. These leading edge methods for AFM-SMFS will serve as a groundwork for researchers cognizant of its current limitations who seek to improve the technique in the future for in-depth studies of molecular biomechanics.

Using Single-Molecule Chemo-Mechanical Unfolding to Simultaneously Probe Multiple Structural Parameters in Protein Folding

While single-molecule force spectroscopy has greatly advanced the study of protein folding, there are limitations to what can be learned from studying the effect of force alone. We developed a novel technique, chemo-mechanical unfolding, that combines multiple perturbants—force and chemical denaturant—to more fully characterize the folding process by simultaneously probing multiple structural parameters—the change in end-to-end distance, and solvent accessible surface area. Here, we describe the theoretical background, experimental design, and data analysis for chemo-mechanical unfolding experiments probing protein folding thermodynamics and kinetics. This technique has been applied to characterize parallel protein folding pathways, the protein denatured state, protein folding on the ribosome, and protein folding intermediates.

Heterogeneous and rate-dependent streptavidin-biotin unbinding revealed by high-speed force spectroscopy and atomistic simulations

Receptor-ligand interactions are essential for biological function and their binding strength is commonly explained in terms of static lock-and-key models based on molecular complementarity. However, detailed information on the full unbinding pathway is often lacking due, in part, to the static nature of atomic structures and ensemble averaging inherent to bulk biophysics approaches. Here we combine molecular dynamics and high-speed force spectroscopy on the streptavidin-biotin complex to determine the binding strength and unbinding pathways over the widest dynamic range. Experiment and simulation show excellent agreement at overlapping velocities and provided evidence of the unbinding mechanisms. During unbinding, biotin crosses multiple energy barriers and visits various intermediate states far from the binding pocket, while streptavidin undergoes transient induced fits, all varying with loading rate. This multistate process slows down the transition to the unbound state and favors rebinding, thus explaining the long lifetime of the complex. We provide an atomistic, dynamic picture of the unbinding process, replacing a simple two-state picture with one that involves many routes to the lock and rate-dependent induced-fit motions for intermediates, which might be relevant for other receptor-ligand bonds.

Full Statistics of Conjugated Thermodynamic Ensembles in Chains of Bistable Units

The statistical mechanics and the thermodynamics of small systems are characterized by the non-equivalence of the statistical ensembles. When concerning a polymer chain or an arbitrary chain of independent units, this concept leads to different force-extension responses for the isotensional (Gibbs) and the isometric (Helmholtz) thermodynamic ensembles for a limited number of units (far from the thermodynamic limit). While the average force-extension response has been largely investigated in both Gibbs and Helmholtz ensembles, the full statistical characterization of this thermo-mechanical behavior has not been approached by evaluating the corresponding probability densities. Therefore, we elaborate in this paper a technique for obtaining the probability density of the extension when force is applied (Gibbs ensemble) and the probability density of the force when the extension is prescribed (Helmholtz ensemble). This methodology, here developed at thermodynamic equilibrium, is applied to a specific chain composed of units characterized by a bistable potential energy, which is able to mimic the folding and unfolding of several macromolecules of biological origin.

Dynamic coarse-graining fills the gap between atomistic simulations and experimental investigations of mechanical unfolding

We present a dynamic coarse-graining technique that allows one to simulate the mechanical unfolding of biomolecules or molecular complexes on experimentally relevant time scales. It is based on Markov state models (MSMs), which we construct from molecular dynamics simulations using the pulling coordinate as an order parameter. We obtain a sequence of MSMs as a function of the discretized pulling coordinate, and the pulling process is modeled by switching among the MSMs according to the protocol applied to unfold the complex. This way we cover seven orders of magnitude in pulling speed. In the region of rapid pulling, we additionally perform steered molecular dynamics simulations and find excellent agreement between the results of the fully atomistic and the dynamically coarse-grained simulations. Our technique allows the determination of the rates of mechanical unfolding in a dynamical range from approximately 10^-8/ns to 1/ns thus reaching experimentally accessible time regimes without abandoning atomistic resolution.

History, rare, and multiple events of mechanical unfolding of repeat proteins

Mechanical unfolding of proteins consisting of repeat domains is an excellent tool to obtain large statistics. Force spectroscopy experiments using atomic force microscopy on proteins presenting multiple domains have revealed that unfolding forces depend on the number of folded domains (history) and have reported intermediate states and rare events. However, the common use of unspecific attachment approaches to pull the protein of interest holds important limitations to study unfolding history and may lead to discarding rare and multiple probing events due to the presence of unspecific adhesion and uncertainty on the pulling site. Site-specific methods that have recently emerged minimize this uncertainty and would be excellent tools to probe unfolding history and rare events. However, detailed characterization of these approaches is required to identify their advantages and limitations. Here, we characterize a site-specific binding approach based on the ultrastable complex dockerin/cohesin III revealing its advantages and limitations to assess the unfolding history and to investigate rare and multiple events during the unfolding of repeated domains. We show that this approach is more robust, reproducible, and provides larger statistics than conventional unspecific methods. We show that the method is optimal to reveal the history of unfolding from the very first domain and to detect rare events, while being more limited to assess intermediate states. Finally, we quantify the forces required to unfold two molecules pulled in parallel, difficult when using unspecific approaches. The proposed method represents a step forward toward more reproducible measurements to probe protein unfolding history and opens the door to systematic probing of rare and multiple molecule unfolding mechanisms.

Hemagglutinin-Mediated Membrane Fusion: A Biophysical Perspective

Influenza hemagglutinin (HA) is a viral membrane protein responsible for the initial steps of the entry of influenza virus into the host cell. It mediates binding of the virus particle to the host-cell membrane and catalyzes fusion of the viral membrane with that of the host. HA is therefore a major target in the development of antiviral strategies. The fusion of two membranes involves high activation barriers and proceeds through several intermediate states. Here, we provide a biophysical description of the membrane fusion process, relating its kinetic and thermodynamic properties to the large conformational changes taking place in HA and placing these in the context of multiple HA proteins working together to mediate fusion. Furthermore, we highlight the role of novel single-particle experiments and computational approaches in understanding the fusion process and their complementarity with other biophysical approaches.

Force probe simulations using a hybrid scheme with virtual sites

Hybrid simulations, in which a part of the system is treated with atomistic resolution and the remainder is represented on a coarse-grained level, allow for fast sampling while using the accuracy of atomistic force fields. We apply a hybrid scheme to study the mechanical unfolding and refolding of a molecular complex using force probe molecular dynamics (FPMD) simulations. The degrees of freedom of the solvent molecules are treated in a coarse-grained manner while atomistic resolution is retained for the solute. The coupling between the solvent and the solute is provided using virtual sites. We test two different common coarse-graining procedures, the iterative Boltzmann inversion method and the force matching procedure, and find that both methodologies give similar results. The results of the FPMD simulations are compared to all-atom simulations of the same system and we find that differences between these simulations and the ones using the hybrid scheme are in a similar range as the differences obtained when using different atomistic force fields. Thus, a hybrid scheme yields qualitatively correct results in the strong non-equilibrium situation the system is experiencing in FPMD simulations.

Biasing effects of receptor-ligand complexes on protein-unfolding statistics

Protein receptor-ligand pairs are increasingly used as specific molecular handles in single-molecule protein-unfolding experiments. Further, known marker domains, also referred to as fingerprints, provide unique unfolding signatures to identify specific single-molecule interactions, when receptor-ligand pairs themselves are investigated. We show here that in cases where there is an overlap between the probability distribution associated with fingerprint domain unfolding and that associated with receptor-ligand dissociation, the experimentally measured force distributions are mutually biased. This biasing effect masks the true parameters of the underlying free energy landscape. To address this, we present a model-free theoretical framework that corrects for the biasing effect caused by such overlapping distributions.

The Power of Force: Insights into the Protein Folding Process Using Single-Molecule Force Spectroscopy

One of the major challenges in modern biophysics is observing and understanding conformational changes during complex molecular processes, from the fundamental protein folding to the function of molecular machines. Single-molecule techniques have been one of the major driving forces of the huge progress attained in the last few years. Recent advances in resolution of the experimental setups, aided by theoretical developments and molecular dynamics simulations, have revealed a much higher degree of complexity inside these molecular processes than previously reported using traditional ensemble measurements. This review sums up the evolution of these developments and gives an outlook on prospective discoveries.

Mechanisms of influenza viral membrane fusion

Influenza viral particles are enveloped by a lipid bilayer. A major step in infection is fusion of the viral and host cellular membranes, a process with large kinetic barriers. Influenza membrane fusion is catalyzed by hemagglutinin (HA), a class I viral fusion protein activated by low pH. The exact nature of the HA conformational changes that deliver the energy required for fusion remains poorly understood. This review summarizes our current knowledge of HA structure and dynamics, describes recent single-particle experiments and modeling studies, and discusses their role in understanding how multiple HAs mediate fusion. These approaches provide a mechanistic picture in which HAs independently and stochastically insert into the target membrane, forming a cluster of HAs that is collectively able to overcome the barrier to membrane fusion. The new experimental and modeling approaches described in this review hold promise for a more complete understanding of other viral fusion systems and the protein systems responsible for cellular fusion.