Adsorption of humic acid onto carbonaceous surfaces: atomic force microscopy study

Microplastics encapsulation in aragonite: efficiency, detection and insight into potential environmental impacts

Plastic pollution in aquatic ecosystems has become a significant problem especially microplastics which can encapsulate into the skeletons of organisms that produce calcium carbonates, such as foraminifera, molluscs and corals. The encapsulation of microplastics into precipitated aragonite, which in nature builds the coral skeleton, has not yet been studied. It is also not known how the dissolved organic matter, to which microplastics are constantly exposed in aquatic ecosystems, affects the encapsulation of microplastics into aragonite and how such microplastics affect the mechanical properties of aragonite. We performed aragonite precipitation experiments in artificial seawater in the presence of polystyrene (PS) and polyethylene (PE) microspheres, untreated and treated with humic acid (HA). The results showed that the efficiency of encapsulating PE and PE-HA microspheres in aragonite was higher than that for PS and PS-HA microspheres. The mechanical properties of resulting aragonite changed after the encapsulation of microplastic particles. A decrease in the hardness and indentation modulus of the aragonite samples was observed, and the most substantial effect occurred in the case of PE-HA microspheres encapsulation. These findings raise concerns about possible changes in the mechanical properties of the exoskeleton and endoskeleton of calcifying marine organisms such as corals and molluscs due to the incorporation of pristine microplastics and microplastics exposed to dissolved organic matter.

Degradable Poly(vinyl alcohol)-Based Supramolecular Plastics with High Mechanical Strength in a Watery Environment

It is challenging to fabricate degradable poly(vinyl alcohol) (PVA)-based plastics that can be used in watery environments because PVA is soluble in water. In this study, PVA-based supramolecular plastics with excellent degradability in soil and high mechanical strength in watery environments are fabricated by the complexation of vanillin-grafted PVA (VPVA), hydrophobic humic acid (HA), and Fe³⁺ ions (hereafter denoted as VPVA-HA-Fe complexes). Large-area PVA-based plastics can be easily prepared from a solution of VPVA-HA-Fe complexes using a blade-coating method. The high-density of hydrogen bonds and coordination interactions, as well as the reinforcement of self-assembled Fe³⁺ -chelated HA nanoparticles, facilitate the fabrication of PVA-based plastics with a breaking strength of ≈85.0 MPa. After immersion in water at room temperature for 7 d, the PVA-based plastics exhibit a breaking strength of ≈26.2 MPa, which is similar to that of polyethylene in its dry state. Furthermore, owing to the reversibility of the hydrogen bonds and coordination interactions, the VPVA-HA-Fe plastics are recyclable and can be conveniently processed into plastic products with desired shapes. After being placed under soil for ≈108 d, the PVA-based plastics are completely degraded into nontoxic species without requiring manual interference.

A review of the application of adsorbents for landfill leachate treatment: Focus on magnetic adsorption

Landfill leachate is a significant environmental threat due to the complexity and variety of its pollutants. There are various physical, chemical, and biological treatment methods proposed for leachate treatment. Adsorption with conventional adsorbents such as activated carbon is a process which has been widely employed with relative success. Magnetic adsorbents are a special type of adsorbents with favorable stability, high adsorption capacities, and excellent recycling and reuse capabilities when compared to conventional sorbents. Research regarding the synthesis and use of magnetic adsorbents has been growing at a rapid pace, exhibiting >8-fold increase in publications in the decade of 2010 to 2020. In the current study, both conventional and magnetic adsorbents for landfill leachate treatment have been comprehensively reviewed and discussed. The application of magnetic adsorbents for landfill leachate treatment is relatively new, with numerous avenues of research open to study. Although the production of magnetic adsorbents is significantly more expensive than conventional adsorbents, when taking into consideration all life cycle costs, they are much more competitive than it initially appears. If environmental impacts are of concern, research should shift towards the use of greener chemicals and processes for magnetic adsorbent synthesis, because preliminary analysis of the current synthesis processes shows a much higher environmental impact compared to conventional adsorbents, in particular in terms of global warming potential and energy use.

Humic substances developed during organic waste composting: Formation mechanisms, structural properties, and agronomic functions

Aerobic composting is a typical biochemical process of stabilization and harmlessness of organic wastes during which organic matter degrades, and then aggregates, to produce humic substances (HSs). HSs are a core product of-and a crucial indicator of-the maturation of compost that can be used in soil amendments. The formation of HSs is affected by the characteristics of the raw materials involved, the presence of compost additives, microbial activity, temperature, pH, the C/N ratio, moisture content, oxygen content and particle size, all of which can interact with each other. The formation of HSs is therefore complex. Moreover, it is difficult to identify definitive structures of humic acids (HAs) and fulvic acids (FAs), which are the two major components of HSs. However, HSs represent the same functional groups and structural arrangements, which helps to predict their structures. Functional groups represented by phenol and carboxylic acid groups of HAs and FAs can provide various agronomic functions, such as plant growth enhancement, water and nutrient retention, and disease suppression capacity. Overall, HSs can act as a soil amendment, fertilizer, and plant growth regulator. These functions of HSs enhance the reuse potential of organic waste compost products; however, this requires scientific control of various composting parameters and appropriate application of final products.

Mechanisms of Humic Acid Fouling on Capacitive and Insertion Electrodes for Electrochemical Desalination

Though electrochemical deionization technologies have been widely explored for brackish water desalination and selective ion removal, their sustained performance in the presence of foulants common to environmental waters remains unclear. This study investigates the fundamental mechanisms by which carbonaceous electrodes used in capacitive deionization and insertion electrodes used for high-capacity selective ion removal are affected by the presence of humic acid (HA). We evaluate HA adsorption behavior and the resulting impact on the ion storage capacity and cycling stability of the electrode materials. We find that HA is primarily adsorbed to the mesopores of two carbonaceous electrodes with distinctly different pore structures, but that the ion storage and transport properties of the electrodes are not significantly impacted by HA adsorption. In contrast, HA adsorption resulted in sharp capacity decay for the insertion (Na₄Mn₉O₁₈) electrode. We attribute this decay to both hindered Na⁺ ion diffusion to the insertion interface in the presence of adsorbed HA, as well as HA mediated electrode dissolution. These findings highlight the contrasting mechanisms for HA fouling of capacitive and insertion electrodes and suggest that insertion electrodes may be more susceptible to performance decline in electrochemical deionization of environmental waters.

Water-based fractionation of a commercial humic acid. Solid-state and colloidal characterization of the solubility fractions

BACKGROUND AND HYPOTHESIS

Humic acid (HA) is of considerable environmental significance, being a major component of soil, as well as being considered for application in other technological areas. However, its structure and colloidal properties continue to be the subject of debate, largely owing to its molecular complexity and association with other humic substances and mineral matter. As a class, HA is considered to comprise supramolecular assemblies of heterogeneous species, and herein we consider a simple route for the separation of some HA sub-fractions.

EXPERIMENTS

A commercial HA sample from Sigma-Aldrich has been fractionated into two soluble (S1, S2) and two insoluble (I1, I2) fractions by successive dissolution in deionized water at near-neutral pH. These sub-fractions have been characterized by solution and solid-state approaches.

FINDINGS

Using this simple approach, the HA has been shown to contain non-covalently bonded species with different polarity and water solubility. The soluble and insoluble fractions have very different chemical structures, as revealed particularly by their solid-state properties (¹³C NMR and IR spectroscopy, and TGA); in particular, S1 and S2 are characterized by higher carbonyl and aromatic contents, compared with I1 and I2. As shown by solution SAXS measurements and AFM, the soluble fractions behave as hydrophilic colloidal aggregates of at least 50nm diameter.

The mechanisms of humic substances self-assembly with biological molecules: The case study of the prion protein

Humic substances (HS) are the largest constituent of soil organic matter and are considered as a key component of the terrestrial ecosystem. HS may facilitate the transport of organic and inorganic molecules, as well as the sorption interactions with environmentally relevant proteins such as prions. Prions enter the environment through shedding from live hosts, facilitating a sustained incidence of animal prion diseases such as Chronic Wasting Disease and scrapie in cervid and ovine populations, respectively. Changes in prion structure upon environmental exposure may be significant as they can affect prion infectivity and disease pathology. Despite its relevance, the mechanisms of prion interaction with HS are still not completely understood. The goal of this work is to advance a structural-level picture of the encapsulation of recombinant, non-infectious, prion protein (PrP) into different natural HS. We observed that PrP precipitation upon addition of HS is mainly driven by a mechanism of "salting-out" whereby PrP molecules are rapidly removed from the solution and aggregate in insoluble adducts with humic molecules. Importantly, this process does not alter the protein folding since insoluble PrP retains its α-helical content when in complex with HS. The observed ability of HS to promote PrP insolubilization without altering its secondary structure may have potential relevance in the context of "prion ecology". These results suggest that soil organic matter interacts with prions possibly without altering the protein structures. This may facilitate prions preservation from biotic and abiotic degradation leading to their accumulation in the environment.

Removal of natural organic matter (NOM) and its constituents from water by adsorption - A review

Natural organic matter (NOM) is produced through metabolic reactions in water supply in drinking water sources and has been reported to cause several problems including objectionable taste and color of water, formation of disinfection by-products (DBPs) and reducing the amount of dissolved oxygen in water. The removal of NOM and its constituents from water is a challenging issue worldwide. Many technologies have been examined for this purpose. The properties and amount of NOM, however, can significantly affect the process efficiency. In the present work, an overview of the recent research studies dealing with adsorption method for the removal of NOM and related compounds from water is presented. A wide variety of conventional and non-conventional adsorbents have been reviewed for their potential in NOM removal from water. As revealed from the literature reviewed, modified adsorbents, composite materials and few nanomaterials have shown promising results for NOM removal from water. The main findings obtained for the removal of NOM using different adsorbents have been discussed in this review.

NMR metabolomics for soil analysis provide complementary, orthogonal data to MIR and traditional soil chemistry approaches--a land use study

The present study was designed to analyse soils by different methodologies to determine the range of traits that could be investigated for the study of environmental soil samples. Proton nuclear magnetic resonance spectroscopy ((1) H NMR) was employed for metametabolomic analysis of soils from agricultural systems (managed) or from soils in a native state (remnant). The metabolomic methodologies employed (grinding and extraction with sonication) are capable of breaking up cell walls and so enabled characterisation of both extracellular and intracellular components of soil. Diffuse mid-infrared spectroscopy (MIR) data was obtained for the same sample sets, and in addition, elemental composition was determined by conventional laboratory chemical testing methods. Also investigated was the antibiotic activity of the soil extracts. Resilient or suppressive soils are valued in the agricultural setting as they convey disease resistance (against bacterial and fungal pathogens) to crop plants. In order to test if any such biological activity could be detected in the soils, the extracts were tested against the bacteria Bacillus subtilis. Several extracts showed strong growth inhibition against the bacteria with the most active clustered together in principle component analysis (PCA) of the metabolomic data. The study showed that the NMR metabolomic approach corresponds more accurately to land use and biochemical properties potentially associated with suppression, while MIR data correlated well to inorganic chemical analysis. Thus, the study demonstrates the utility in combining these spectroscopic methods for soil analysis.

Prion protein interaction with soil humic substances: environmental implications

Transmissible spongiform encephalopathies (TSE) are fatal neurodegenerative disorders caused by prions. Animal TSE include scrapie in sheep and goats, and chronic wasting disease (CWD) in cervids. Effective management of scrapie in many parts of the world, and of CWD in North American deer population is complicated by the persistence of prions in the environment. After shedding from diseased animals, prions persist in soil, withstanding biotic and abiotic degradation. As soil is a complex, multi-component system of both mineral and organic components, it is important to understand which soil compounds may interact with prions and thus contribute to disease transmission. Several studies have investigated the role of different soil minerals in prion adsorption and infectivity; we focused our attention on the interaction of soil organic components, the humic substances (HS), with recombinant prion protein (recPrP) material. We evaluated the kinetics of recPrP adsorption, providing a structural and biochemical characterization of chemical adducts using different experimental approaches. Here we show that HS act as potent anti-prion agents in prion infected neuronal cells and in the amyloid seeding assays: HS adsorb both recPrP and prions, thus sequestering them from the prion replication process. We interpreted our findings as highly relevant from an environmental point of view, as the adsorption of prions in HS may affect their availability and consequently hinder the environmental transmission of prion diseases in ruminants.

Morphological characteristics of fulvic acid fractions observed by atomic force microscopy

Structural studies on fulvic acids (FAs) are significantly important since they are believed to be involved in many environmentally important processes, such as adsorption and transportation of organic and inorganic pollutants. In this research, morphology characteristics of FAs were studied by atomic force microscopy (AFM). FAs that were isolated from three soil layers (A1, B and C) of the same vertical profile in a Korean pine forest were divided into four fractions (FA-1, FA-2, FA-3 and FA-4) by a sequence of successive elution processes. Most of FAs appeared as a platy particle in the AFM topographic and phase images. Among these platy particles, some have a regular shape, such as round flake and oblong flake; others have irregular structures, such as sand heaps. Particle morphologies of different FA fractions, including hydrophilic and hydrophobic FAs fractions, were similar. However, particle sizes and distributions of FA fractions from different soil layers at the same vertical profile did differ. Particle sizes of hydrophobic FAs were relevant with respect to the soil depth. They were increased with the increasing of the soil depth. FAs from C layers were more heterogeneous with respect to the A1 and B. Our results may foster a better understanding for the relevance between the morphology of FA particles with the soil layers and the soil depth.

Investigation of organic matter entrapped in synthetic carbonates--a multimethod approach

Organic matter (OM) entrapped in calcite is regularly used for environmental studies; however, insertion mechanisms and types of interaction remain poorly understood. The present study used a new methodology to investigate interactions between OM and the calcite matrix during crystallization processes with humic acid (HA) entrapment. A multimethod approach confirmed that HA is both adsorbed onto the calcite surface and incorporated into the calcite lattice during crystallization. Our results also confirm the log-linear correlation between fluorescence intensity and calcite matrix HA concentration. Fourier transform infrared spectroscopy showed that HA in colloidal conformation is adsorbed onto the calcite surface as a result of the structure of the OH stretching band. We also developed a new method based on synchrotron analysis that uses sulfur as a tracer element for entrapped HA and that localizes the OM electrostatically adsorbed onto the calcite surface. Changes in the sulfur environment, determined using X-ray absorption near-edge structure spectroscopy, indicated more complex insertion mechanisms than simple adsorption of HA during calcite crystallization. Desorption experiments revealed the stability of the OM atomic structure and its layered nature. These results allowed us to draw up a general model of OM insertion in calcite.