Casting materials and their application in research and teaching

Anatomical and Functional Study of the Ostrich (Struthio camelus) Lung through Macroscopic Analysis in Combination with Optical and Electron Microscopy Techniques

The Ostrich occupies a unique position as the largest bird on the planet. Like other ratites, it has been reputed to have a phylogenetically primitive lung. We used macroscopy, light microscopy, transmission and scanning electron microscopy as well as silicon rubber casting to elucidate the functional design of its lung and compare it with what is already documented for the avian species. The neopulmonic region was very small and poorly developed. The categories of the secondary bronchi (SB) present and their respective numbers included laterodorsal (8-10), lateroventral (4-5), medioventral (4-6) and posterior (16-24). The lateral aspects of the laterodorsals were covered with a transparent collapsible membrane internally lined with a squamous to cuboidal epithelium. The bulk of these SB were in close proximity to intercostal spaces and the intercostal muscles and were thought to be important in the propulsion of gases. The lung parenchyma was rigid, with the atria well supported by septa containing smooth muscles, connective tissue interparabronchial septa were absent, and blood capillaries were supported by epithelial bridges. There were two categories of epithelia bridges: the homogenous squamous type comprising two leaflets of type I cells and the heterogeneous type consisting of a type I pneumocyte and type II cell. Additional type two cells were found at the atrial openings as well as the walls of the infundibulae and the air capillaries. The atria were shallow and opened either directly into several air capillaries or into a few infundibulae. The presence of numerous type II cells and the absence of interparabronchial connective tissue septa may imply that the ostrich lung could be capable of some degree of compliance.

Fluorescent cacao oil: A material suited for highlighting blood vessel in macro-scale dissection

This study describes a novel method to highlight vascular networks in animal tissue during macro-scale dissection using cacao oil and ultraviolet (UV) fluorescent dye. This is a three-step method: 1) injecting warmed cacao oil containing oil-based UV fluorescent dye (“fluorescent cacao oil” or FCO) into the blood vessels of a dead animal; 2) lowering the temperature to solidify the FCO in blood vessels; and 3) illuminating blood vessels with UV light when the specimen is dissected. This method uses the unique properties of cacao oil, which is solid at room temperature but becomes liquid at 40°C. Such a relatively low melting temperature meets two conflicting demands, i.e., maintaining low viscosity for better flow into the blood vessels and preventing damage of animal tissue by heat. This method is:•

Practical, as blood vessel is strongly highlighted using handy UV light during dissection; therefore, a specific medical equipment is not required

•

Inexpensive, as FCO is made by mixing two commercially available produces (cacao oil and UV fluorescent dye)

•

Stable, as FCO-injected tissue can be fixed and preserved semi-permanently in formalin. The fluorescent ability of FCO is not affected by this process

Distributed manufacturing: A case study in additive manufacturing face masks for the COVID-19 pandemic

At the onset of the COVID-19 (Coronavirus Disease 2019) pandemic, USA faced supply chain issues causing a nationwide shortage of N95 respirators and PAPR devices. Researchers at Oak Ridge National Laboratory's (ORNL) Manufacturing Demonstration Facility (MDF) were sent to work from home to help slow the spread of the pandemic, and during that time they were tasked with using their manufacturing expertise to research alternative methods of producing face masks. To rapidly iterate on face mask designs without access to a research or manufacturing facility, 3D (3-Dimensional) printing and silicone casting were used. Molds and components for the masks are modeled with computer-aided design (CAD), printed with common home desktop 3D printers, and test poured with skin-safe silicone rubber. The resultant masks are form fitting and comfortable to wear. To ease the shortage of N95 filter media, the masks are designed to use existing filter materials such as home HVAC (heating, ventilation, and air conditioning) filters. The masks can be sanitized, and the filter replaced to allow the same mask to be reused. The result is not equivalent to an N95 mask, and not meant to be a replacement, but is meant to be a stopgap mask that is still able to provide the wearer filtered protection. Filtration testing has not been performed because it is not the intention of the authors to make medical claims. This research is meant to demonstrate the rapid design, iteration, and manufacturing processes of a stopgap mask.

Osteoarticular vascular corrosion casting using industrial polyurethane for the 3D representation of the vascular tree on human knee

Vascular casting is a widely used method for the representation of body vascularization. Many different injection materials have been described throughout the time to enhance the arterial vascular supply within a specifically defined anatomical location. The use of industrial polyurethane has been recently evaluated and applied to animal and human anatomy. The aim of this study was to confirm the safe and reliable use of industrial polyurethane in knee specimen in order to obtain a three-dimensional vascular tree of the distal femur. 10 fresh-frozen knees (mid-thigh to mid tibia) were used to assess the vascularity around the femoral condyles. Industrial polyurethane foam (Soudal™ foam) was diluted with acetone in order to obtain a runny fluid, easy to inject. After injection, the knees were bathed in a 10% NaOH solution, heated at 30°. The corrosion process took from 20 to 24h and allowed all the soft tissue surrounding the knee to be subsided, leaving only the bone with polyurethane vascular architecture. After soft tissue corrosion, the vascular network around the knees was easily identified underlying the relation of the vessels to the bone. Even small arterioles (diameter<1mm) were distinguished with a good resistance to breakage. Corrosion casting remains an easy and reliable alternative to dissection for the understanding of tissue perfusion as the handling of the polyurethane is easy and has low costs. The described author's method can be used osteo-articular specimen as well as in other organs. The protocol of injection and corrosion needs however to be adapted to the different specimen and anatomical location. Polyurethane associated to acetone can safely be used as injection material in order to demonstrate the vascularity of a specimen and remains easy to use.

Simultaneous Three-Dimensional Vascular and Tubular Imaging of Whole Mouse Kidneys With X-ray μCT

Concurrent three-dimensional imaging of the renal vascular and tubular systems on the whole-kidney scale with capillary level resolution is labor-intensive and technically difficult. Approaches based on vascular corrosion casting and X-ray micro computed tomography (μCT), for example, suffer from vascular filling artifacts and necessitate imaging with an additional modality to acquire tubules. In this work, we report on a new sample preparation, image acquisition, and quantification protocol for simultaneous vascular and tubular μCT imaging of whole, uncorroded mouse kidneys. The protocol consists of vascular perfusion with the water-soluble, aldehyde-fixable, polymeric X-ray contrast agent XlinCA, followed by laboratory-source μCT imaging and structural analysis using the freely available Fiji/ImageJ software. We achieved consistent filling of the entire capillary bed and staining of the tubules in the cortex and outer medulla. After imaging at isotropic voxel sizes of 3.3 and 4.4 μm, we segmented vascular and tubular systems and quantified luminal volumes, surface areas, diffusion distances, and vessel path lengths. This protocol permits the analysis of vascular and tubular parameters with higher reliability than vascular corrosion casting, less labor than serial sectioning and leaves tissue intact for subsequent histological examination with light and electron microscopy.

Fractal analysis of concurrently prepared latex rubber casts of the bronchial and vascular systems of the human lung

Fractal geometry (FG) is a branch of mathematics that instructively characterizes structural complexity. Branched structures are ubiquitous in both the physical and the biological realms. Fractility has therefore been termed nature's design. The fractal properties of the bronchial (airway) system, the pulmonary artery and the pulmonary vein of the human lung generates large respiratory surface area that is crammed in the lung. Also, it permits the inhaled air to intimately approximate the pulmonary capillary blood across a very thin blood-gas barrier through which gas exchange to occur by diffusion. Here, the bronchial (airway) and vascular systems were simultaneously cast with latex rubber. After corrosion, the bronchial and vascular system casts were physically separated and cleared to expose the branches. The morphogenetic (Weibel's) ordering method was used to categorize the branches on which the diameters and the lengths, as well as the angles of bifurcation, were measured. The fractal dimensions (DF) were determined by plotting the total branch measurements against the mean branch diameters on double logarithmic coordinates (axes). The diameter-determined DF values were 2.714 for the bronchial system, 2.882 for the pulmonary artery and 2.334 for the pulmonary vein while the respective values from lengths were 3.098, 3.916 and 4.041. The diameters yielded DF values that were consistent with the properties of fractal structures (i.e. self-similarity and space-filling). The data obtained here compellingly suggest that the design of the bronchial system, the pulmonary artery and the pulmonary vein of the human lung functionally comply with the Hess-Murray law or 'the principle of minimum work'.

Pododermal angioarchitecture in the equine hoof wall: A light and scanning electron microscopic study of the wall proper

BACKGROUND

Blood supply is an important factor for the normal function of the equine hoof, but earlier studies present conflicting data on functional characteristics of its angioarchitecture.

OBJECTIVE

Emphasis was laid on demonstration of the microvascularisation in the different hoof wall regions, aiming at assessment of specialised vascular structures, e.g. vascular sphincter mechanisms and arteriovenous anastomoses.

METHODS

The angioarchitecture of the adult pododerma in the equine hoof wall was examined by scanning electron microscopy of micro-corrosion casts assisted by exemplary histological and immuno-histochemical characterisation of the pododermal vasculature.

RESULTS

The microvasculature of the lamellae and terminal papillae in all hoof wall regions was described in detail. Focal dilations and microvascular sphincters were a common feature. In contrast to former investigations, true arteriovenous anastomoses were detected at the base of the primary lamellae and the terminal papillae only, while thoroughfare channels proved a regular element within the microvasculature of the wall proper. Bicuspid venous valves were detected as regular feature. For the first time, the alpha-smooth muscle actin-reactivity of the microvascularisation in the hoof wall was systematically assessed, verifying its specialised vasomotor devices.

CONCLUSIONS

The vasculature of the hoof wall displays specific angio-adaptations to high pressure and tensile load.

The Contribution of the Left Phrenic Nerve to Innervation of the Esophagogastric Junction

The contribution of the left phrenic nerve to innervation of the esophagogastric junction. The esophagogastric junction is part of the barrier preventing gastroesophageal reflux. We have investigated the contribution of the phrenic nerves to innervation of the esophagogastric junction in humans and piglets by dissecting 30 embalmed human specimens and 14 piglets. Samples were microdissected and nerves were stained and examined by light and electron microscopy. In 76.6% of the human specimens, the left phrenic nerve participated in the innervation of the esophagogastric junction by forming a neural network together with the celiac plexus (46.6%) or by sending off a distinct phrenic branch, which joined the anterior vagal trunk (20%). Distinct left phrenic branches were always accompanied by small branches of the left inferior phrenic artery. In 10% there were indirect connections with a distinct phrenic nerve branch joining the celiac ganglion, from which celiac plexus branches to the esophagogastric junction emerged. Morphological examination of phrenic branches revealed strong similarities to autonomic celiac plexus branches. There was no contribution of the left phrenic nerve or accompanying arteries from the caudal phrenic artery in any of the piglets. The right phrenic nerve made no contribution in any of the human or piglet samples. We conclude that the left phrenic nerve in humans contributes to the innervation of the esophagogastric junction by providing ancillary autonomic nerve fibers. Experimental studies of the innervation in pigs should consider that neither of the phrenic nerves was found to contribute. Clin. Anat. 33:265-274, 2020. © 2019 Wiley Periodicals, Inc.

Corrosion casting of the cardiovascular structure in adult zebrafish for analysis by scanning electron microscopy and X-ray microtomography

Zebrafish have come to the forefront as a flexible, relevant animal model to study human disease, including cardiovascular disorders. Zebrafish are optically transparent during early developmental stages, enabling unparalleled imaging modalities to examine cardiovascular structure and function in vivo and ex vivo. At later stages, however, the options for systematic cardiovascular phenotyping are more limited. To visualise the complete vascular tree of adult zebrafish, we have optimised a vascular corrosion casting method. We present several improvements to the technique leading to increased reproducibility and accuracy. We designed a customised support system and used a combination of the commercially available Mercox II methyl methacrylate with the Batson's catalyst for optimal vascular corrosion casting of zebrafish. We also highlight different imaging approaches, with a focus on scanning electron microscopy (SEM) and X-ray microtomography (micro-CT) to obtain highly detailed, faithful three-dimensional reconstructed images of the zebrafish cardiovascular structure. This procedure can be of great value to a wide range of research lines related to cardiovascular biology in small specimens.

An innovative method in venous coronary cast technique

Polyurethane foam (PU foam) is a new material which is being used in producing both macro-anatomical and micro-anatomical specimens. PU foam is simple to use, without need for special equipment. The present study was carried out to evaluate morphology of coronary sinus and its tributaries. During the study, we encountered few problems in carrying out injections. Coronary sinus and its tributaries were difficult to cannulate since the coronary sinus lacks a vascular stem, around which ligature can be tied before injection so that the cannula can be held in place. In contrast, in majority of the organs it is easy to inject since they possess tubular vascular stem to hold the cannula in place. A new device was developed which could be used to cannulate coronary sinus orifice to inject the casting media. The second problem we faced was saponification of adipose tissue. This made corrosion of the soft tissue difficult. Hence in this study, we describe the device we have developed to place in the coronary sinus orifice, and how saponified adipose tissue was taken care during the actual maceration step.

The use of porcine corrosion casts for teaching human anatomy

In teaching and learning human anatomy, anatomical autopsy and prosected specimens have always been indispensable. However, alternative methods must often be used to demonstrate particularly delicate structures. Corrosion casting of porcine organs with Biodur E20^® Plus is valuable for teaching and learning both gross anatomy and, uniquely, the micromorphology of cardiovascular, respiratory, digestive, and urogenital systems. Assessments of casts with a stereomicroscope and/or scanning electron microscope as well as highlighting cast structures using color coding help students to better understand how the structures that they have observed as two-dimensional images actually exist in three dimensions, and students found using the casts to be highly effective in their learning. Reconstructions of cast hollow structures from (micro-)computed tomography scans and videos facilitate detailed analyses of branching patterns and spatial arrangements in cast structures, aid in the understanding of clinically relevant structures and provide innovative visual aids. The casting protocol and teaching manual we offer can be adjusted to different technical capabilities and might also be found useful for veterinary or other biological science classes.

Optimization of Vascular Casting for Three-Dimensional Fluorescence Cryo-Imaging of Collateral Vessels in the Ischemic Rat Hindlimb

Development of collateral vessels, arteriogenesis, may protect against tissue ischemia, however, quantitative data on this process remain scarce. We have developed a technique for replicating the entire arterial network of ischemic rat hindlimbs in three dimensions (3D) based on vascular casting and automated sequential cryo-imaging. Various dilutions of Batson's No. 17 with methyl methacrylate were evaluated in healthy rats, with further protocol optimization in ischemic rats. Penetration of the resin into the vascular network greatly depended on dilution; the total length of casted vessels below 75 µm was 13-fold higher at 50% dilution compared with the 10% dilution. Dilutions of 25-30%, with transient clamping of the healthy iliac artery, were optimal for imaging the arterial network in unilateral ischemia. This protocol completely filled the lumina of small arterioles and collateral vessels. These appeared as thin anastomoses in healthy legs and increasingly larger vessels during ligation (median diameter 1 week: 63 µm, 4 weeks: 127 µm). The presented combination of quality casts with high-resolution cryo-imaging enables automated, detailed 3D analysis of collateral adaptation, which furthermore can be combined with co-registered 3D distributions of fluorescent molecular imaging markers reflecting biological activity or perfusion.