Effect of production system before the finishing period on carcass, meat and fat qualities of beef

Effect of the gain rate during growing phase on the performance and characteristics of carcass and meat of super precocious steers

The aim was to evaluate the effect of different rates of weight gain during the backgrounding on animal performance and carcass and meat characteristics of steers finished in feedlots. Thirty-six Angus steers, 12 ± 2 months of age, were backgrounded during 91 days on Aruana grass pasture (Panicum maximum cv. Aruana) managed under different stocking rates to achieve three different weight gains: HIGH ADG (average daily gain)-no feed restriction (ADG = 0.846 kg); MEDIUM ADG-moderate feed restriction (ADG = 0.456 kg); and LOW ADG-high feed restriction (ADG = 0.154 kg). To ensure the difference in ADG, we offered 0.7% live weight of concentrate feed in the HIGH treatment and a better forage supply in the MEDIUM treatment. After the backgrounding, the animals were finished in feedlot. There was no effect of the previous performance on the animals' performance in the feedlot. The LOW presented higher weight (218.9 vs. 207.9 kg) and hot (54.0% vs. 51.3%) and cold (53.5% vs. 50.5%) carcass yield than the MEDIUM, besides presenting meat with less cooking losses (15.0% vs. 18.2%), marbling (7 vs. 4.0 points), palatability (7.1 vs. 6.3 points), juiciness (7.2 vs. 6.4 points), tenderness (7.1 vs. 6.3 points), and lower shear force (5.78 vs. 8.75 kg) than HIGH. LOW ADG steers stay longer in the finishing phase but presented in general better quality carcass and meat than those with MEDIUM or HIGH during the backgrounding.

Effects of Rearing Management Applied throughout the Charolais Young Bulls' Life on Carcass and Meat Quality

The aim of this work was to study, for the first time, the effects of the rearing management (from birth to slaughter) applied throughout the life of young bulls on carcass and meat quality. Five rearing managements were defined statistically, from a combination of 30 rearing factors, using a hierarchical clustering on principal components. This study considered the individual data of 179 Charolais young bulls from commercial farms. The carcass traits were more sensitive to rearing management than the meat traits. Rearing management had an effect mainly on fat and overall meat grain for the carcass, and on color and tenderness for the longissimus meat. However, it was possible to produce carcass and/or meat with similar properties from different rearing managements. Among the five rearing managements defined in this study, two were identified as allowing the best trade-off to produce simultaneously high carcass and meat quality. The first management was characterized by absence of growth period and a short fattening duration, with a wrapped haylage or corn silage-based diet. The second management was characterized by short pre-weaning and growth periods, and a long fattening period.

Small genetic variation affecting mRNA isoforms associated with marbling and meat color in beef cattle

The aim of this study was to identify mRNA isoforms and small genetic variants that may be affecting marbling and beef color in Nellore cattle. Longissimus thoracis muscle samples from 20 bulls with different phenotypes (out of 80 bulls set) for marbling (moderate (n = 10) and low (n = 10) groups) and beef color (desirable (n = 10) and undesirable (n = 9) group) traits were used to perform transcriptomic analysis using RNA sequencing. Fourteen and 15 mRNA isoforms were detected as differentially expressed (DE) (P-value ≤ 0.001) between divergent groups for marbling and meat color traits, respectively. Some of those DE mRNA isoforms have shown sites of splicing modified by small structural variants as single nucleotide variant (SNV), insertion, and/or deletion. Enrichment analysis identified metabolic pathways, such as O2/CO2 exchange in erythrocytes, tyrosine biosynthesis, and phenylalanine degradation. The results obtained suggest potential key regulatory genes associated with these economically important traits for the beef industry and for the consumer.

Carcass characteristics and meat evaluation of cattle finished in temperate pasture and supplemented with natural additive containing clove, cashew oil, castor oils, and a microencapsulated blend of eugenol, thymol, and vanillin

BACKGROUND

Forty crossbred steers were supplemented with different doses (from 0 control to 6000 mg/animal/day) of natural additive blend containing clove essential oil, cashew oil, castor oil, and a microencapsulated blend of eugenol, thymol, and vanillin for 80 days. Carcass characteristics, drip loss, and antioxidant activity were evaluated 24 h post mortem on longissimus thoracis, and the effects of aging (until 14 days) were evaluated for water losses (thawing/aging and cooking), texture, color, and lipid oxidation.

RESULTS

The use of the natural additive blend did not modify (P > 0.05) carcass characteristics but did, however, modify body composition (P < 0.05). Drip losses were unaffected by the treatments tested (P > 0.05). There was an observed quadratic effect (P < 0.05) on losses from thawing/aging on the first day of storage. Regarding the effects of natural additives on cooking losses, there was a quadratic effect (P < 0.05) among the treatments on day 7 of aging. Differences between days of aging were only observed with control treatment. Shear force was similar among treatments on days 1 and 7 of aging. On day 14 a linear effect (P < 0.05) was observed. Also, a linear effect (P < 0.05) appeared on meat lightness, meat from the control group being clearer on day 1. No changes were observed in redness among treatments or days of storage (P > 0.05). Yellowness was not modified by the treatments (P > 0.05)but only by the days of storage in control and the lowest dosage used.

CONCLUSION

The blend of natural additives has potential use in pasture feeding and could improve meat quality. However, doses should be adjusted. © 2021 Society of Chemical Industry.

Sensory and Physicochemical Analysis of Meat from Bovine Breeds in Different Livestock Production Systems, Pre-Slaughter Handling Conditions and Ageing Time

Different bovine breeds and production systems are used worldwide, giving rise to differences in intrinsic and extrinsic characteristics of beef. In order to meet the consumer requirements, new approaches are currently being developed to guarantee tenderness, taste, and juiciness of beef. However, the final consumer perception is complex, and it is also affected by several interrelated variables. This study aimed to evaluate the physicochemical parameters and sensory profile of three Spanish cattle breeds under different livestock production systems (extensive and intensive) and pre-slaughter handling conditions (mixing and not mixing with unfamiliar individuals at pre-mortem time). Meat samples from each group were also studied at different ageing times (7 and 14 days). Regarding sensory attributes, twelve panelists assessed meat samples and an exhaustive statistical analysis was carried out. The most evident and strongest effect was the breed type, allowing a great differentiation among them using principal components and discriminant analysis. The livestock production system was the second most important parameter, significantly affecting odor, flavor, and textural profile (fibrousness). It can be concluded that there were marked differences in the traits of these beef that could be modified by other factors in order to fulfill consumer tastes.

Preliminary investigation into the use of Raman spectroscopy for the verification of Australian grass and grain fed beef

Australian grass and grain-fed beef products attract premium prices at sale and several beef processors market beef underwritten by production system claims. This preliminary investigation assessed the feasibility of using Raman spectroscopy to detect differences in the chemical composition of subcutaneous fat from cattle raised in extensive and intensive production systems. Raman spectra, fatty acid composition, β-carotene composition and objective colour measurements were measured on 150 grass and 150 grain-fed cattle. Spectral differences at peaks including 1069 cm^-1, 1127 cm^-1, 1301 cm^-1 and 1445 cm^-1 suggest that Raman spectra is able to detect differences in saturated fatty acids, which were significantly higher in carcases from grain-fed cattle. Differences in spectra at 1658 cm^-1 were observed, however further research is required to investigate the cause of this spectral feature. Overall, this study indicated that Raman spectroscopy is a potential tool for the authentication of beef carcases from grass and grain-fed production systems.

Relationships Between Cull Beef Cow Characteristics, Finishing Practices and Meat Quality Traits of Longissimus thoracis and Rectus abdominis

The aim of study was to investigate the relationships between the characteristics of cull beef cows in the Rouge des Prés breed, finishing practices and physicochemical characteristics and sensory traits of Longissimus thoracis (LT) and Rectus abdominis (RA) muscles from 111 cows. On the basis of our surveys, which qualify at cow level the animal characteristics and finishing diet, clusters of cull cows and finishing practices are created and their effects tested on LT and RA meat quality. Old and heavy cows with good suckling ability (95 months, 466 kg and 7.1/10) are characterized by LT with larger fibers, and higher intramuscular fat content and fat-to-muscle ratio. Young and heavy cows with low suckling ability (54 months, 474 kg and 4.4/10) are characterized by LT and RA with lower MyHC IIx and higher MyHC IIa and MyHC I proportions. MyHC IIx and IIa proportions are lower and a* and b* color indices higher when cows are finished on pasture, probably related to grass diet and physical activity. The fat-to-muscle ratio is higher without any effect on the intramuscular fat content when cows are finished over a short period (107 days) with a high level of concentrate (9.7 kg/day). The opposite effect is observed over a long period (142 days) with a low level of concentrate (5.8 kg/day), confirming the interaction effect between finishing duration and amount of energy concentrate on the allotment of adipose tissue deposit.

Characterisation of beef production systems and their effects on carcass and meat quality traits of Piemontese young bulls

Using the Piemontese breed as a case study, we characterised beef production systems within the EU classification, and investigated their effects on carcass and meat quality traits. The research involved 1,327 young bulls fattened on 115 farms. The production systems identified by hierarchical cluster analysis were: traditional (restricted feeding and either tie-stalls or loose-housing), modern breeders and fatteners and specialised fatteners (the last two were divided in those using or not using total mixed rations). Despite the large variability in management techniques within production systems, production systems affected (P < 0.05) farm size, animal density, environmental scoring, diet, slaughter age and all carcass traits except weight. Lightness (L*) of Longissimus thoracis was the only meat quality trait affected (P < 0.05), with values greater in the traditional tie-stall system (+0.9 L*). Given the very limited effect of production systems on meat quality traits, factors related to individual animals within farms, such as genetics, should be considered for their improvement.

Carcass characteristics and meat quality of Nellore bulls submitted to different nutritional strategies during cow-calf and stocker phase

There have been few studies realized that evaluate the effects of adopting different nutritional systems in more than one phase of cattle production on carcass and meat characteristics. This study was realized to evaluate carcass and meat characteristics from bulls submitted to different nutritional systems during two production phases. The experiment was conducted at Figueira's farm during two production phases: I (cow-calf) - 80 calves (99.6±2.72 days of age and 109.7±2.99 kg of BW) with their mothers were randomly assigned into two supplemental diets: cow-calf mineral supplement (n=40) or cow-calf creep-feeding (n=40); II (stocker) - the same 80 calves (201.2±2.11 days of age and 190.2±3.37 kg of BW) were redistributed into two production systems: stocker pasture (n=40) or stocker feedlot (SF; n=40). After, all 80 animals were kept on a pasture system (III) for 290 days, and then finished in a feedlot system (IV) for more 33 days. Then, they were slaughtered at an average 764.2±3.06 days of age and at 499.2±3.33 kg of final BW. After slaughter, the average daily gain was calculated, and the carcass and meat characteristics were measured. The statistical model design used was completely randomized in a 2×2 factorial arrangement (two treatment groups on cow-calf phase and two treatment groups on stocker phase). The single effects between the groups in each phase and the interactions between both phases (cow-calf v. stocker) were analyzed. The results were compared by Fisher's test, using the R statistical software. A cow-calf by stocker phases interaction occurred for carcass conformation and fiber diameter. For single effects, the greatest influences observed were in the stocker phase. The feedlot group was slaughtered 17 days earlier, with greater final BW (3.8%), hot carcass weight (5.7%), average daily gain (6.9%), dressing percentage (1.8%), carcass length (1.8%), carcass width (1.5%), longissimus muscle area (4.8%) and muscle depth (2.3%) than pasture group. The SF group also had influence on fat color; showing higher L* and lower b* values. These results reveal that bulls reared in feedlot at the stocker phase have higher muscle development and that the stocker phase has the greatest potential to influence carcass characteristics and meat quality.

Preliminary Study to Determinate the Effect of the Rearing Managements Applied during Heifers' Whole Life on Carcass and Flank Steak Quality

The aim of this study was to investigate the impact of rearing managements applied during a heifers’ whole life on the carcass and flank steak (rectus abdominis) meat traits. For this study, rearing managements applied on 96 heifers were identified by conducting surveys in farms. A heifers’ whole life was divided into three key periods: Pre-weaning, growth, and fattening. The combination of the rearing factors applied during the heifers’ whole life allowed us to characterize several rearing managements. Among them, four have been studied in depth. The main results displayed that the carcass traits were more sensitive to the rearing managements than the flank steak traits. The different managements considered had an impact on the weight, the dressing percentage and the conformation score of the carcass. Whereas, they had no impact on the sensory descriptors, the sheer force and the color of the flank steak. This study showed that the variations observed for carcass and meat traits could not be explained by the variation of only one rearing factor but could be explained by many rearing factors characterizing the rearing management applied. Finally, this study demonstrated that it was possible to improve carcass traits without deteriorating meat traits.

Effects of breed-production system on collagen, textural, and sensory traits of 10 European beef cattle breeds

In the current study the collagen, texture, and sensory characteristics of meat from 712 yearling males of 10 local Spanish and French beef breeds raised in their typical production systems were described. The breed-production system affected collagen and texture variables but affected sensory variables only slightly. There was a large amount of intra breed-production system variation for all the variables. French breeds had lower values for collagen solubility (~12%) than Spanish breeds (~40%). Stress (WB) varied from 36 N/cm² in Casina to 44 N/cm² in Salers, whereas compression stress at 80% ranged from 35 N/cm² in Asturiana de los Valles to 40 N/cm² in Salers. Oven cooking resulted in higher cooking losses (24%) than cooking on a grill (12%). Cooking losses increased as the grill temperature increased. Numerous significant correlations were found among variables. Carcass weight is associated with all the collagen and texture variables. Correlation coefficients among texture and collagen variables were statistically significant and these correlation coefficients were in general higher for solubility percentage than for total collagen content, highlighting the importance of the solubility of collagen rather than total collagen in determining meat textural properties.

PRACTICAL APPLICATIONS

To differentiate a product in the market, it is necessary to define its characteristics. Differentiation allows increasing the added value of products and, therefore, income of the farmers. In addition, it guarantees to the consumers that the product they purchase has the intrinsic and extrinsic quality features that they seek. For consumers, beef texture is one of the most important quality attributes sought, therefore, studying factors that can affect beef texture is a major interest for the industry.