Affinity monoliths generated by in situ polymerization of the ligand

Quantification of human intravenous immunoglobulin from plasma and in process samples by affinity chromatography

Advances in affinity chromatography now make it possible to analyze immunoglobulin G from plasma and its fractions with a simple chromatographic method. Ligands derived from camelid antibodies have been developed which have affinity to all 4 subclasses of human IgG without a cross reactivity to other immunoglobulins. The commercially available Capture Select FcXL is the basis for a simple method for direct quantification of immunoglobulin G from plasma or from fractions from cold ethanol precipitation. After direct injection of the sample into the column the unbound proteins are washed out with equilibration buffer and eluted with a pH-step. The elution the peak is integrated, and quantity is derived form a standard curve. The limit of detection with 40 µg/mL, and a linearity up to 250 µg/mL allows an analysis of samples ranging from 0.04 to 50 mg/mL using varying injection volume without further dilution and the two-wavelength detection. A full cycle is completed within five minutes. This method can serve as orthogonal method for in-process control but also for process development.

Affinity Monolith-Integrated Microchips for Protein Purification and Concentration

Affinity chromatography is a valuable method to purify and concentrate minute amount of proteins. Monoliths with epoxy groups for affinity immobilization were prepared by direct in-situ photopolymerization of glycidyl methacrylate and ethylene glycol dimethacrylate in porogenic solvents consisting of 1-dodecanol and cyclohexanol. By integrating affinity monoliths onto a microfluidic system, targeted biomolecules can be captured and retained on affinity column, while other biomolecules having no specific interactions toward the immobilized ligands flow through the microchannel. Therefore, proteins which remain on the affinity column are purified and concentrated, and then eluted by appropriate solutions and finally, separated by microchip capillary electrophoresis. This integrated microfluidic device has been applied to the purification and separation of specific proteins (FITC-labeled human serum albumin and IgG) in a mixture.

Affinity monolith preconcentrators for polymer microchip capillary electrophoresis

Developments in biology are increasing demands for rapid, inexpensive, and sensitive biomolecular analysis. In this study, polymer microdevices with monolithic columns and electrophoretic channels were used for biological separations. Glycidyl methacrylate-co-ethylene dimethacrylate monolithic columns were formed within poly(methyl methacrylate) microchannels by in situ photopolymerization. Flow experiments in these columns demonstrated retention and then elution of amino acids under conditions optimized for sample preconcentration. To enhance analyte selectivity, antibodies were immobilized on monoliths, and subsequent lysozyme treatment blocked nonspecific adsorption. The enrichment capability and selectivity of these affinity monoliths were evaluated by purifying fluorescently tagged amino acids from a mixture containing green fluorescent protein (GFP). Twenty-fold enrichment and 91% recovery were achieved for the labeled amino acids, with a >25 000-fold reduction in GFP concentration, as indicated by microchip electrophoresis analysis. These devices should provide a simple, inexpensive, and effective platform for trace analysis in complex biological samples.

Affinity monolith-integrated poly(methyl methacrylate) microchips for on-line protein extraction and capillary electrophoresis

Immunoaffinity monolith pretreatment columns have been coupled with capillary electrophoresis separation in poly(methyl methacrylate) (PMMA) microchips. Microdevices were designed with eight reservoirs to enable the electrically controlled transport of selected analytes and solutions to carry out integrated immunoaffinity extraction and electrophoretic separation. The PMMA microdevices were fabricated reproducibly and with high fidelity by solvent imprinting and thermal bonding methods. Monoliths with epoxy groups for antibody immobilization were prepared by direct in situ photopolymerization of glycidyl methacrylate and ethylene glycol dimethacrylate in a porogenic solvent consisting of 70% 1-dodecanol and 30% cyclohexanol. Antifluorescein isothiocyanate was utilized as a model affinity group in the monoliths, and the immobilization process was optimized. A mean elution efficiency of 92% was achieved for the monolith-based extraction of fluorescein isothiocyanate (FITC)-tagged human serum albumin. FITC-tagged proteins were purified from a contaminant protein and then separated electrophoretically using these devices. The developed immunoaffinity column/capillary electrophoresis microdevices show great promise for combining sample pretreatment and separation in biomolecular analysis.

Development of an affinity silica monolith containing human serum albumin for chiral separations

An affinity monolith based on silica and containing immobilized human serum albumin (HSA) was developed and evaluated in terms of its binding, efficiency and selectivity in chiral separations. The results were compared with data obtained for the same protein when used as a chiral stationary phase with HPLC-grade silica particles or a monolith based on a copolymer of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA). The surface coverage of HSA in the silica monolith was similar to values obtained with silica particles and a GMA/EDMA monolith. However, the higher surface area of the silica monolith gave a material that contained 1.3-2.2-times more immobilized HSA per unit volume when compared to silica particles or a GMA/EDMA monolith. The retention, efficiency and resolving power of the HSA silica monolith were evaluated using two chiral analytes: d/l-tryptophan and R/S-warfarin. The separation of R- and S-ibuprofen was also considered. The HSA silica monolith gave higher retention and higher or comparable resolution and efficiency when compared with HSA columns that contained silica particles or a GMA/EDMA monolith. The silica monolith also gave lower back pressures and separation impedances than these other materials. It was concluded that silica monoliths can be valuable alternatives to silica particles or GMA/EDMA monoliths when used with immobilized HSA as a chiral stationary phase.

Macroporous monolithic gels, cryogels, with immobilized phages from phage-display library as a new platform for fast development of affinity adsorbent capable of target capture from crude feeds

Selected phage clones expressing a peptide with high binding affinity for recombinant human lactoferrin or von Willebrand factor (vWF) were covalently coupled to macroporous poly(dimethylacrylamide) monolithic column. Large pore size (10-100 microm) of macroporous poly(dimethylacrylamide) makes it possible to couple long (1 microm) phage particles as ligands without any risk of blocking the monolithic column. The macroporous monolithic columns were successfully used for the direct affinity capture of target proteins from particulate containing feeds like milk containing casein micelles and fat globules (1-10 microm in size) or even whole blood containing blood cells (up to 20 microm in size). The newly developed platform based on selected bacteriophages immobilized within macropores of the monolithic cryogels presents a convenient alternative to antibodies for fast and selective development of the specific adsorbent.

Chemical force titrations of antigen- and antibody-modified poly(methylmethacrylate)

Poly(methylmethacrylate) (PMMA) is a versatile polymer that displays desirable properties for development of cheap and disposable microfluidic devices for sensing biomolecular interactions. Atomic force microscopy (AFM) and chemical force titrations were used to determine the efficacy of surface modifications made to accommodate protein-substrate linkage. AFM images show the effects on surface morphology of carboxylated-, amine-, hCG antigen- and anti-hCG antibody-modified PMMA substrates. Confocal microscopy was used to determine the fluorescent intensity of labeled antibody species on the PMMA substrate, confirming the success of surface antigen/antibody immobilization. Surface pK(1/2) value for carboxylic acid and amine species grafted on PMMA were determined. When carboxylic acid or amine-terminated tips were titrated against PMMA samples terminated with the hCG antigen and anti-hCG antibody, peaks appeared in the force titration curve consistent with the pI range of the antigen or antibody species. Strong adhesive forces were present at pH values above 7.0 when the antigen was present on the PMMA substrate, and these were attributed to hydrophobic interactions between the antigen and the alkane "linker" chain attaching the amine or carboxylate group to the AFM tip. Such hydrophobic interactions were not observed with the carboxylic acid or amine/antibody combinations suggesting that the surface-linked antibody was more resistant to denaturation under higher pH. The results demonstrated the feasibility of using AFM approaches for interrogating protein grafting strategies in the fabrication of PMMA-based microsystems.

Affinity monolith chromatography

The combined use of monolithic supports with selective affinity ligands as stationary phases has recently given rise to a new method known as affinity monolith chromatography (AMC). This review will discuss the basic principles behind AMC and examine the types of supports and ligands that have been employed in this method. Approaches for placing affinity ligands in monoliths will be considered, including methods based on covalent immobilization, biospecific adsorption, entrapment, and the formation of coordination complexes. Several reported applications will then be presented, such as the use of AMC for bioaffinity chromatography, immunoaffinity chromatography, immobilized metal-ion affinity chromatography, dye-ligand affinity chromatography, and biomimetic chromatography. Other applications that will be discussed are chiral separations and studies of biological interactions based on AMC.

Off-line form of the Michaelis-Menten equation for studying the reaction kinetics in a polymer microchip integrated with enzyme microreactor

We firstly transformed the traditional Michaelis-Menten equation into an off-line form which can be used for evaluating the Michaelis-Menten constant after the enzymatic reaction. For experimental estimation of the kinetics of enzymatic reactions, we have developed a facile and effective method by integrating an enzyme microreactor into direct-printing polymer microchips. Strong nonspecific adsorption of proteins was utilized to effectively immobilize enzymes onto the microchannel wall, forming the integrated on-column enzyme microreactor in a microchip. The properties of the integrated enzyme microreactor were evaluated by using the enzymatic reaction of glucose oxidase (GOx) with its substrate glucose as a model system. The reaction product, hydrogen peroxide, was electrochemically (EC) analyzed using a Pt microelectrode. The data for enzyme kinetics using our off-line form of the Michaelis-Menten equation was obtained (K(m) = 2.64 mM), which is much smaller than that reported in solution (K(m) = 6.0 mM). Due to the hydrophobic property and the native mesoscopic structure of the poly(ethylene terephthalate) film, the immobilized enzyme in the microreactor shows good stability and bioactivity under the flowing conditions.

Immobilised peptide displaying phages as affinity ligands

An affinity purification procedure for the direct purification of lactoferrin from defatted (skimmed) milk has been developed. The procedure is based on using selected phage clones expressing a peptide with high binding affinity for lactoferrin which were covalently coupled to macroporous poly(dimethylacrylamide) monolithic column. Large pore size (10-100 microm) of macroporous poly(dimethylacrylamide) makes it possible to couple long (1 microm) phage particles as ligands without any risk of blocking the monolithic column. Bound lactoferrin was eluted using 1M NaCl with a purity of >95%. The technique presents a good alternative to conventional immunoaffinity chromatography for purification of a protein of interest from complex samples due to (i) the robustness of the system in terms of recovery and ligand leakage and (ii) economical aspect in terms of low ligand cost.

Analyte Templating: Enhancing the Enantioselectivity of Chiral Selectors upon Incorporation into Organic Polymer Environments

A simple strategy for preserving and enhancing the chiral recognition capacity of polymer-embedded chiral selectors is proposed, capitalizing on a temporary blockage of the receptor binding site with tightly binding analytes during the polymerization process. We demonstrate that the copolymerization of a quinine tert-butylcarbamate selector monomer with chiral (and achiral) 3,5-dichlorobenzoyl amino acids allows one to control to a certain extent the binding characteristics of the resultant polymeric chiral stationary phases. The structural and stereochemical requirements of the templating analytes for maximizing the chiral recognition capacity of the polymer-embedded selectors are probed. The chromatographic chiral recognition characteristics of the analyte-templated polymeric chiral stationary phases are analyzed with respect to binding capacities and affinities and compared to those obtained with a conventional silica-based surface-grafted reference material. Changes in substrate-specific enantioselectivity originating from analyte templating are also addressed.

Immobilized microfluidic enzymatic reactors

The use of enzymes for cleavage, synthesis or chemical modification represents one of the most common processes used in biochemical and molecular biology laboratories. The continuing progress in medical research, genomics, proteomics, and related emerging biotechnology fields leads to exponential growth of the applications of enzymes and the development of modified or new enzymes with specific activities. Concurrently, new technologies are being developed to improve reaction rates and specificity or perform the reaction in a specific environment. Besides large-scale industrial applications, where typically a large processing capacity is required, there are other, much lower-scale applications, benefiting form the new developments in enzymology. One such technology is microfluidics with the potential to revolutionize analytical instrumentation for the analyses of very small sample amounts, single cells or even subcellular assemblies. This article aims at reviewing the current status of the development of the immobilized microfluidic enzymatic reactors (IMERs) technology.

Affinity processes realized on high-flow-through methacrylate-based macroporous monoliths

The technology for preparation of rigid macroporous polymers suggested in the late 1980s has become a powerful instrument for the development of a novel scientific and practical field. At present, monolithic stationary phases are widely used in the processes of bioseparation (chromatography), bioconversion (enzyme reactors) as well as in other processes based on interphase mass distribution (for example, solid phase peptide and oligonucleotide synthesis). Bioaffinity modes of suggested dynamic methods are very promising for their use in different analytical processes (immunological, ecological, medical and other types of analytical monitoring), preparative isolation of blood proteins such as myoglobin, hemoglobin, immunoglobulins, etc. and also recombinant products directly from cell supernatants or lysates. For the first time, it has been shown that bioaffinity pairing with participation of immobilized on carefully designed rigid supports is very fast and the whole process of affinity separation can be realized within second time scale. The principle of bioaffinity recognition is generaly at the construction of biological reactors (for example, enzyme reactors). Improved kinetics of biocatalized reactions is explained by a minimal influence on the surface of the used sorbent. Very perspective field is the use of discussed monoliths for solid phase chemical synthesis of fragments of biological macromolecules (peptides and oligonucleotides). Several examples of these applications will be presented and discussed.

Convective Interaction Media (CIM)--short layer monolithic chromatographic stationary phases

Modern downstream processing requires fast and highly effective methods to obtain large quantities of highly pure substances. Commonly applied method for this purpose is chromatography. However, its main drawback is its throughput since purification, especially of large molecules, requires long process time. To overcome this problem several new stationary phases were introduced, among which short layer monoliths show superior properties for many applications. The purpose of this review is to give an overview about short methacrylate monolithic columns commercialised under the trademark Convective Interaction Media (CIM). Their unique properties are described from different perspectives, explaining reasons for their application on various areas. Approaches to prepare large volume methacrylate monolithic column are discussed and optimal solutions are given. Different examples of CIM monolithic column implementation are summarised in the last part of the article to give the reader an idea about their advantages.

Monoliths for fast bioseparation and bioconversion and their applications in biotechnology

Monoliths have consolidated their position in bioseparation. More than 200 different applications have been reported in the past two decades and their advantages compared to conventional chromatography demonstrated. These include the high mass transfer efficiency due to the convective flow enabled by the macroporous character of the matrix. Recently plasmid DNA and viruses were separated with high efficiency and cryogels and monolithic superporous agarose were developed for capture of proteins from crude homogenates and separation of microorganisms or lymphocytes. Currently four companies manufacture monoliths mainly for analytical applications although monoliths with a volume of 0.8 liter are commercially available and 8 L are available as prototypes. A book entitled "Monolithic materials: preparation, properties and applications" was published in 2003 and became standard reference of the status of this area. This review focuses on the progress in monoliths that goes beyond the scope of this reference book. Less progress has been made in the field of bioconversions in spite of the fact that monolithic supports exhibit better performance than beads in enzymatic processing of macromolecules. It appears that the scientific community has not yet realized that supports for these applications are readily available. In addition, monoliths will further substantially advance bioseparations of both small and large molecules in the future.

Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography

Reactive thiol-modified capillary columns for capillary electrochromatography (CEC) were developed by transforming the pendent 2,3-epoxypropyl groups of poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths into 3-mercapto-2-hydroxy-propyl residues by a nucleophilic substitution reaction, employing sodium-hydrogen sulfide as nucleophilic reagent. Conditions for this modification reaction were systematically optimized with respect to different parameters, such as reaction temperature, pH-value, reaction time, type and concentration of organic modifier, and concentration of the sodium-hydrogen sulfide solution. The amount of thiol groups that was generated on the monolith surface was determined directly in the capillaries by a disulfide-exchange reaction employing 2,2'-dipyridyl disulfide (DPDS). This reaction in the capillary liberates pyridine-2-thione in equimolar amount to the surface sulfhydryls, which was collected into a vial and determined photometrically at 343 nm by RP-HPLC. About 17% of the total lateral epoxide moieties of the monolithic substrate could be transformed to reactive sulfhydryl groups, which corresponds to about 0.7 mmol g(-1) monolithic polymer, with a column-to-column repeatability of 3.2% R.S.D. The reactive thiol groups can be utilized to attach any chromatographic ligand with appropriate anchor in a second step, e.g. by radical addition, graft polymerization, nucleophilic substitution, disulfide formation or Michael addition reaction. To demonstrate the feasibility of the concept, we chose an anion exchange type chromatographic ligand based on a quinine derivative, O-9-tert-butylcarbamoylquinine (t-BuCQN) which was attached to the monolith in a radical addition reaction, for a further in-column surface functionalisation. About 78% of the sulfhydryl groups were derivatized with t-BuCQN as determined from differential DPDS assays before and after the selector immobilization reaction. The applicability of these surface-functionalised monolithic capillary columns could be shown by an electrochromatographic separation of the enantiomers of N-3,5-dinitrobenzoyl-leucine, which performed fairly well compared to an analogous capillary that was fabricated by an in situ copolymerization approach.

Enzyme immobilization on epoxy- and 1,1′-carbonyldiimidazole-activated methacrylate-based monoliths

Monolithic Convective Interaction Media (CIM) have been activated with epoxide and imidazole carbamate functionalities and used as supports for covalent immobilization of protein A, deoxyribonuclease I, and trypsin. The efficiency of immobilization for these proteins was determined from the amount of bound IgG, degradation of DNA, and hydrolysis of Nalpha-benzoyl-L-arginine ethyl ester, respectively. The respective biological activities of trypsin and the binding capacity of protein A immobilized via imidazole carbamate groups were 11.45 and 2.25 times higher than those obtained for epoxide matrix while they were practically equal for deoxyribonuclease I. The kinetics of immobilization was studied in detail for trypsin under dynamic conditions and revealed that the enzyme immobilized via imidazole carbamate groups already reached its highest activity in 5 min. In contrast, a much longer time was required for immobilization via epoxy groups.

Characterization of polyacrylamide based monolithic columns

Supermacroporous monolithic polyacrylamide (pAAm)-based columns have been prepared by radical cryo-copolymerization (copolymerization in the moderately frozen system) of acrylamide with functional co-monomer, allyl glycidyl ether (AGE), and cross-linker N,N'-methylene-bis-acrylamide (MBAAm) directly in glass columns (ID 10 mm). The monolithic columns have uniform supermacroporous sponge-like structure with interconnected supermacropores of pore size 5-100 microm. The monoliths can be dried and stored in the dry state. High mechanical stability of the monoliths allowed sterilization by autoclaving. Column-to-column reproducibility of pAAm-monoliths was demonstrated on 5 monolithic columns from different batches prepared under the same cryostructuration conditions.

Mass transfer characteristics of plasmids in monoliths

The hydrodynamic properties and pore-structure of monoliths based on functionalized poly(glycidyl methacrylate-ethylene dimethacrylate) were characterised by pulse response experiments using different probes representing a wide range of molecular mass. On a small scale, band spreading was found to be caused to the extent of more than 90% by extra-column effects. These monoliths have large channel diameters, providing a suitable chromatography adsorbent for processing of large molecules. Dynamic and static binding capacity for plasmid DNA was investigated. For our model plasmid, consisting of 4.9 kbp, a capacity of 7 mg/mL was observed in comparison to 0.3 mg/mL for a conventional medium designed for protein separation. When plasmids were loaded on the monolith a gradual increase in pressure drop was observed. The channels filled up and the cross-sectional area available for liquid flow decreased. Therefore, a higher pressure drop was observed during elution. This is caused by (i) shrinking of the channels as effect of the high salt concentration, (ii) high viscosity of the mobile phase due to high concentration of plasmids, and (iii) an increase of the hydrodynamic radius of the plasmid with salt concentration from 45 nm at 150 mM to 70 nm at 2 M NaCl, as measured by dynamic light scattering. These types of monoliths are considered to be the preferred adsorbents for plasmid separation.

Characterization of a continuous supermacroporous monolithic matrix for chromatographic separation of large bioparticles

A continuous supermacroporous monolithic chromatographic matrix has been characterized using a capillary model, experimental breakthrough curves, and pressure drop experiments. The model describes the convective flow and its dispersive mixing effects, mass transfer resistance, pore size distribution, and the adsorption behavior of the monolithic matrix. It is possible to determine an effective pore size distribution by fitting the capillary model to experimental breakthrough curves and pressure drop experiments. The model is able to describe the flow rate dependence of the experimental breakthrough curves. Mass transport resistance was due to: (i) dispersive mixing effects in the convective flow in the pores; and (ii) slow diffusion in the stagnant film covering the surface within each pore, under adsorption conditions. The monolithic matrix can be described by a very narrow pore size distribution, illustrating one of the advantages of the gel. A broader pore size distribution results in increased band broadening. This can be studied easily using the model developed in this investigation.