NMR approach to the quantification of nonstatistical 13C distribution in natural products: vanillin

Position-specific isotope effects during alkaline hydrolysis of 2,4-dinitroanisole resolved by compound-specific isotope analysis, 13C NMR, and density-functional theory

Compound-specific isotope analysis (CSIA), position-specific isotope analysis (PSIA), and computational modeling (e.g., quantum mechanical models; reactive-transport models) are increasingly being used to monitor and predict biotic and abiotic transformations of organic contaminants in the field. However, identifying the isotope effect(s) associated with a specific transformation remains challenging in many cases. Here, we describe and interpret the position-specific isotope effects of C and N associated with a S_N2Ar reaction mechanism by a combination of CSIA and PSIA using quantitative ¹³C nuclear magnetic resonance spectrometry, and density-functional theory, using 2,4-dinitroanisole (DNAN) as a model compound. The position-specific ¹³C enrichment factor of O-C₁ bond at the methoxy group attachment site (ε_C1) was found to be approximately -41‰, a diagnostic value for transformation of DNAN to its reaction products 2,4-dinitrophenol and methanol. Theoretical kinetic isotope effects calculated for DNAN isotopologues agreed well with the position-specific isotope effects measured by CSIA and PSIA. This combination of measurements and theoretical predictions demonstrates a useful tool for evaluating degradation efficiencies and/or mechanisms of organic contaminants and may promote new and improved applications of isotope analysis in laboratory and field investigations.

Use of quantitative 1H and 13C NMR to determine the purity of organic compound reference materials: a case study of standards for nitrofuran metabolites

Comparability of measurement results and their metrological traceability to the International System of Units (SI) are fundamental tools to ensure reliable decisions in the social sphere, commerce, and science. The use of appropriate references in analytical chemistry, such as certified reference materials (CRMs) of high purity substances, is one of the required procedures to obtain traceable measurements. When commercial standards with non-certified purity values are used, traceability must be achieved by determining the purity of the standard using a potential primary reference measurement procedure or other appropriate methods. Quantitative nuclear magnetic resonance (qNMR) is a technique with the potential to be used in primary measurement procedures. This work presents the determination of purity by ¹H qNMR for nitrofuran metabolites 3-amino-2-oxazolidinone (AOZ), 3-amino-5-morpholinomethyl-2-oxazolidinone (AMOZ), and 1-aminohydantoin (AHD). Furthermore, a recent qNMR method developed by our group to improve the quantitative performance of measurements using ¹³C nucleus was used to determine the purity of semicarbazide (SEM) nitrofuran metabolite. Purity values obtained by qNMR for AOZ, AMOZ, and AHD standards were compared to values obtained by the mass balance approach using a suite of analytical methods: Karl Fischer (KF) coulometric titration and thermogravimetry (TG) for the determination of water and residual solvents, gas and liquid chromatography for the determination of impurities structurally related to the metabolites. The results obtained by qNMR and mass balance were consistent.Graphical abstract.

Intramolecular distribution of 13C/12C isotopes in amino acids of diverse origins

Carbon stable isotope analysis can provide information about the origin and synthetic pathways that produce organic molecules, with applications in chemical, medical and (bio)geochemical sciences. The ¹³C/¹²C isotope ratios of organics such as amino acids are most commonly obtained as whole molecule averages. In this study, we apply proton nuclear magnetic resonance spectroscopy to conduct position-specific carbon isotope analyses of L-/D-alanine, L-threonine and L-histidine from different sources, in addition to molecule average stable isotope analyses obtained via mass spectrometry. Our results demonstrate that carbon isotope ratios can vary significantly between the individual carbon positions within an amino acid. For example, the β- and γ- carbons of L-threonine can differ in ¹³C/¹²C ratio by > 20 ‰. Comparisons of the position-specific and whole molecule average stable isotope abundances show that whole molecule analyses can mask the intramolecular isotope variation. These results provide the first experimentally measured position-specific isotope ratios for alpha and side chain carbons of alanine, threonine and histidine. Comparison with previous ab initio calculations of intramolecular equilibrium fractionation shows that the carbon isotope distributions are not at equilibrium, thus kinetic isotope effects play a significant role in amino acid synthesis. We hypothesize that position-specific ¹³C/¹²C isotope ratios provide an "isotopic fingerprint" that can give insight into the origin or synthesis pathway that formed an amino acid, and that this emerging analytical field will be a valuable addition to traditional stable isotope analysis.

Position-Specific Carbon Stable Isotope Ratios by Proton NMR Spectroscopy

Carbon stable isotopes provide insights into the origin and synthesis pathway of an organic molecule, and hence, contribute information that is fundamental to understanding chemical, physiological, and ecological processes. Organic carbon ¹³C/¹²C isotope ratios are commonly obtained as whole-molecule averages or as measurements of bulk samples. In contrast, position-specific isotope analysis (PSIA) provides isotope ratios for the individual carbons within a molecule, providing additional information that is masked by traditional analytical techniques. Here we introduce a ¹H NMR method for determining position-specific ¹³C/¹²C ratios within organic molecules. A peak shape superposition procedure is used to bypass the need for traditional peak integration, by exploiting relationships among the shapes of ¹H and ¹³C satellite peaks in ¹H NMR spectra. The method also has a significant sensitivity advantage over NMR methods that utilize direct detection of ¹³C. Furthermore, we demonstrate that isotope standard materials (such as those obtainable from U.S. Geological Survey) are indispensable in calibrating an NMR instrument, in order to obtain accurate isotope ratio results. Our analytical approach was applied to organic molecules of different complexity and origin, including ethanols, propionic acids, and thymidine. Results verify that chemically identical molecules from different sources can have different intramolecular isotope distributions; hence position-specific ¹³C/¹²C ratios provide an isotopic fingerprint of an organic molecule. Position-specific information for the nucleoside thymidine, where five of eight carbon positions were measured, is significant because its complexity would make it a difficult target for PSIA by mass spectrometry. The ¹H NMR method is complementary to other methods of PSIA, and will make ¹³C/¹²C PSIA employable to a wider range of organic molecules.

Optimized slice-selective 1H NMR experiments combined with highly accurate quantitative 13C NMR using an internal reference method

Isotope ratio monitoring by ¹³C NMR spectrometry (irm-¹³C NMR) provides the complete ¹³C intramolecular position-specific composition at natural abundance. It represents a powerful tool to track the (bio)chemical pathway which has led to the synthesis of targeted molecules, since it allows Position-specific Isotope Analysis (PSIA). Due to the very small composition range (which represents the range of variation of the isotopic composition of a given nuclei) of ¹³C natural abundance values (50‰), irm-¹³C NMR requires a 1‰ accuracy and thus highly quantitative analysis by ¹³C NMR. Until now, the conventional strategy to determine the position-specific abundance x_i relies on the combination of irm-MS (isotopic ratio monitoring Mass Spectrometry) and ¹³C quantitative NMR. However this approach presents a serious drawback since it relies on two different techniques and requires to measure separately the signal of all the carbons of the analyzed compound, which is not always possible. To circumvent this constraint, we recently proposed a new methodology to perform ¹³C isotopic analysis using an internal reference method and relying on NMR only. The method combines a highly quantitative ¹H NMR pulse sequence (named DWET) with a ¹³C isotopic NMR measurement. However, the recently published DWET sequence is unsuited for samples with short T₁, which forms a serious limitation for irm-¹³C NMR experiments where a relaxing agent is added. In this context, we suggest two variants of the DWET called Multi-WET and Profiled-WET, developed and optimized to reach the same accuracy of 1‰ with a better immunity towards T₁ variations. Their performance is evaluated on the determination of the ¹³C isotopic profile of vanillin. Both pulse sequences show a 1‰ accuracy with an increased robustness to pulse miscalibrations compared to the initial DWET method. This constitutes a major advance in the context of irm-¹³C NMR since it is now possible to perform isotopic analysis with high relaxing agent concentrations, leading to a strong reduction of the overall experiment time.

The new face of isotopic NMR at natural abundance

The most widely used method for isotope analysis at natural abundance is isotope ratio monitoring by Mass Spectrometry (irm-MS) which provides bulk isotopic composition in ² H, ¹³ C, ¹⁵ N, ¹⁸ O or ³⁴ S. However, in the 1980s, the direct access to Site-specific Natural Isotope Fractionation by Nuclear Magnetic Resonance (SNIF-NMR^TM ) was immediately recognized as a powerful technique to authenticate the origin of natural or synthetic products. The initial - and still most popular - application consisted in detecting the chaptalization of wines by irm-² H NMR. The approach has been extended to a wide range of methodologies over the last decade, paving the way to a wide range of applications, not only in the field of authentication but also to study metabolism. In particular, the emerging irm-¹³ C NMR approach delivers direct access to position-specific ¹³ C isotope content at natural abundance. After highlighting the application scope of irm-NMR (² H and ¹³ C), this article describes the major improvements which made possible to reach the required accuracy of 1‰ (0.1%) in irm-¹³ C NMR. The last part of the manuscript summarizes the different steps to perform isotope analysis as a function of the sample properties (concentration, peak overlap) and the kind of targeted isotopic information (authentication, affiliation). Copyright © 2016 John Wiley & Sons, Ltd.

Nonlinear detection of secondary isotopic chemical shifts in NMR through spin noise

The detection of minor species in the presence of large amounts of similar main components remains a key challenge in analytical chemistry, for instance, to obtain isotopic fingerprints. As an alternative to the classical NMR scheme based on coherent excitation and detection, here we introduce an approach based on spin-noise detection. Chemical shifts and transverse relaxation rates are determined using only the detection circuit. Thanks to a nonlinear effect in mixtures with small chemical shift dispersion, small signals on top of a larger one can be observed with increased sensitivity as bumps on a dip; the latter being the signature of the main magnetization. Experimental observations are underpinned by an analytical theory: the coupling between the magnetization and the coil provides an amplified detection capability of both small static magnetic field inhomogeneities and small NMR signals. This is illustrated by two-bond ¹²C/¹³C isotopic measurements.

Nuclear spin noise allows passive monitoring of magnetization using the sole NMR detection circuit. Here, the authors report spectroscopic signatures of low abundance molecules and of weak magnetic field gradients which are nonlinearly amplified by cooled-coil probes and large overlapping signals.

Authentication of the origin of sucrose-based sugar products using quantitative natural abundance (13) C NMR

BACKGROUND

Due to possible falsification of sugar cane products with cheaper alternative (sugar beet) on the market, a simple analytical methodology needs to be developed to control the authenticity of sugar products.

RESULTS

A direct (13) C nuclear magnetic resonance (NMR) method has been validated to differentiate between sucrose-based sugar products produced from sugar beet (C3 plant) and sugar cane (C4 plant). The method is based on calculating relative (13) C content of the C1, C2, C5, and the C1, C4, C5, C6 positions of the glycosyl and fructosyl moieties of the sucrose molecule, respectively. NMR acquisition parameters and data processing have been optimized to reach a high level of intraday and interday precision (<0.2%). Good linearity (R(2)  = 0.93) was obtained for the beet sugar-cane sugar blends containing from 0 to 100 wt% of beet sugar. The method was applied to ten commercial sucrose-based sugar products of different botanical origin. Principal component analysis (PCA) was applied to the relative peak areas for replicate measurements to visualize the difference between studied products.

CONCLUSION

The (13) C NMR method is a good alternative to complex isotope ratio mass spectrometry measurements for routine detection and semi-quantification of adulteration of commercial cane sugar (C4 plant) with less expensive beet sugar (C3 plant). © 2015 Society of Chemical Industry.

Two new tetracyclic triterpenoids from the barks of Melia azedarach

Two new tetracyclic triterpenoids, together with 21 known compounds, were isolated from the barks of Melia azedarach. The structures of new compounds were elucidated by the means of HRESIMS, 1D NMR, 2D NMR, and X-ray crystallography analysis.

Nonstatistical 13C distribution during carbon transfer from glucose to ethanol during fermentation is determined by the catabolic pathway exploited

During the anaerobic fermentation of glucose to ethanol, the three micro-organisms Saccharomyces cerevisiae, Zymomonas mobilis, and Leuconostoc mesenteroides exploit, respectively, the Embden-Meyerhof-Parnas, the Entner-Doudoroff, and the reductive pentose phosphate pathways. Thus, the atoms incorporated into ethanol do not have the same affiliation to the atomic positions in glucose. The isotopic fractionation occurring in each pathway at both the methylene and methyl positions of ethanol has been investigated by isotopic quantitative (13)C NMR spectrometry with the aim of observing whether an isotope redistribution characteristic of the enzymes active in each pathway can be measured. First, it is found that each pathway has a unique isotope redistribution signature. Second, for the methylene group, a significant apparent kinetic isotope effect is only found in the reductive pentose phosphate pathway. Third, the apparent kinetic isotope effects related to the methyl group are more pronounced than for the methylene group. These findings can (i) be related to known kinetic isotope effects of some of the enzymes concerned and (ii) give indicators as to which steps in the pathways are likely to be influencing the final isotopic composition in the ethanol.

Fast quantitative 1H-13C two-dimensional NMR with very high precision

Quantitative analysis by nuclear magnetic resonance (NMR) requires highly precise measurements to achieve reliable quantification. It is particularly true in (13)C site-specific natural isotope fractionation studied by nuclear magnetic resonance, where the range of values of (13)C isotopic deviations at natural abundance is highly restricted. Consequently, an NMR method capable of measuring δ(13)C ‰ values with a very high precision (a few per mil) is indispensable. This high degree of precision has already been achieved by one-dimensional (13)C acquisitions; however, this approach is limited by peak overlaps which reduce the precision of the isotope content determination, even for certain small molecules. It is therefore necessary to extend this promising methodology to a higher dimensionality. In this context, this paper aims at determining conditions that allow the achievement of two-dimensional (2D) (1)H-(13)C heteronuclear experiments with a precision of a few per mil in a reasonable time. Our results demonstrate that a high precision (repeatability of 2 per mil) can be reached with the (1)H-(13)C HSQC (Heteronuclear Single Quantum Correlation) experiment, thus satisfying the conditions needed to perform (13)C isotope analysis by 2D NMR. We also consider the impact of several approaches which have been proposed to reduce the duration of heteronuclear 2D experiments. Two of these common time-saving strategies, spectral aliasing and linear prediction, are fully compatible with the high-precision requirements of isotopic NMR, while a third one, nonuniform sampling, leads to dramatic precision losses. In conclusion, this study demonstrates the feasibility of very precise 2D NMR measurements and opens a number of application perspectives.

Comparison of IRMS and NMR spectrometry for the determination of intramolecular 13C isotope composition: application to ethanol

Isotopic (13)C NMR is a relatively recent technique which allows the determination of intramolecular (13)C isotope composition at natural abundance. It has been used in various scientific fields such as authentication, counterfeiting or plant metabolism. Although its precision has already been evaluated, the determination of its trueness remains still challenging. To deal with that issue, a comparison with another normalized technique must be achieved. In this work, we compare the intramolecular (13)C isotope distribution of ethanol from different origins obtained using both Isotope Ratio Mass Spectrometry (IRMS) and Nuclear Magnetic Resonance (NMR) spectrometry techniques. The IRMS approach consists of the oxidation of ethanol to acetic acid followed by the degradation of the latter for the analysis of each fragments formed. We show here that the oxidation of ethanol to acetic acid does not bring any significant error on the determination of the site-specific δ(13)C (δ(13)C(i)) of ethanol using the IRMS approach. The difference between the data obtained for 16 samples from different origins using IRMS and NMR approaches is not statistically significant and remains below 0.3‰. These results are encouraging for the future studies using isotopic NMR, especially in combination with the IRMS approach.

Analytical model for site-specific isotope fractionation in 13C during sorption: determination by isotopic 13C NMR spectrometry with vanillin as model compound

The aim of this study was to conceive a reactive transport model capable of providing quantitative site-specific enrichment factors for fractionation in (13)C isotopic content during sorption. As test compound the model treats vanillin, for which the (13)C isotopic content at natural abundance at each of the 8 carbon positions can be measured by quantitative (13)C nuclear magnetic resonance spectrometry. This technique determines the isotope ratios with a resolution better than ±1‰ (0.1%) at each carbon position. Site-specific isotope fractionations were recorded in chromatography column experiments with silica RP-18 as stationary phase. The one dimensional reactive transport model accounted for the sorption/desorption behavior of 8 individual (13)C-isotopomers and one (12)C-isotopomer of vanillin and reproduced satisfactorily the bulk (average over the whole compound) fractionation observed during elution. After model calibration, the enrichment factors were fitted for each carbon site where a significant fractionation was recorded. To show the interest of such a transport model for environmental studies, the model, extended to three dimensions, was exploited to simulate reactive transport in an aquifer. These results show that significant (13)C isotope fractionation is expected for 4 out of 8 (13)C-isotopomers in vanillin, and illustrate that bulk isotope ratios measured by conventional compound specific isotope analysis and mass spectrometry would hardly document significant isotope fractionations in vanillin. It is concluded that modeling of site-specific isotope ratios in molecules is a priori feasible and may help to quantify unknown processes in the environment.

The intramolecular ¹³C-distribution in ethanol reveals the influence of the CO₂ -fixation pathway and environmental conditions on the site-specific ¹³C variation in glucose

Efforts to understand the cause of ¹²C versus ¹³C isotope fractionation in plants during photosynthesis and post-photosynthetic metabolism are frustrated by the lack of data on the intramolecular ¹³C-distribution in metabolites and its variation with environmental conditions. We have exploited isotopic carbon-13 nuclear magnetic resonance (¹³C NMR) spectrometry to measure the positional isotope composition (δ¹³C(i) , ‰) in ethanol samples from different origins: European wines, liquors and sugars from C₃, C₄ and crassulacean acid metabolism (CAM) plants. In C₃-ethanol samples, the methylene group was always ¹³C-enriched (∼2‰) relative to the methyl group. In wines, this pattern was correlated with both air temperature and δ(18)O of wine water, indicating that water vapour deficit may be a critical defining factor. Furthermore, in C₄-ethanol, the reverse relationship was observed (methylene-C relatively ¹³C-depleted), supporting the concept that photorespiration is the key metabolic process leading to the ¹³C distribution in C₃-ethanol. By contrast, in CAM-ethanol, the isotopic pattern was similar to but stronger than C₃-ethanol, with a relative ¹³C-enrichment in the methylene-C of up to 13‰. Plausible causes of this ¹³C-pattern are briefly discussed. As the intramolecular δ¹³C(i) -values in ethanol reflect that in source glucose, our data point out the crucial impact on the ratio of metabolic pathways sustaining glucose synthesis.

A 13C NMR spectrometric method for the determination of intramolecular δ13C values in fructose from plant sucrose samples

Recent developments in (13) C NMR spectrometry have allowed the determination of intramolecular (13) C/(12) C ratios with high precision. However, the analysis of carbohydrates requires their derivatization to constrain the anomeric carbon. Fructose has proved to be particularly problematic because of a byproduct occurring during derivatization and the complexity of the NMR spectrum of the derivative. Here, we describe a method to determine the intramolecular (13) C/(12) C ratios in fructose by (13) C NMR analysis of the acetyl-isopropylidene derivative. We have applied this method to measure the intramolecular (13) C/(12) C distribution in the fructosyl moiety of sucrose and have compared this with that in the glucosyl moiety. Three prominent features stand out. First, in sucrose from both C(3) and C(4) plants, the C-1 and C-2 positions of the glucosyl and fructosyl moieties are markedly different. Second, these positions in C(3) and C(4) plants show a similar profile. Third, the glucosyl and fructosyl moieties of sucrose from Crassulacean acid metabolism (CAM) metabolism have a different profile. These contrasting values can be interpreted as a result of the isotopic selectivity of enzymes that break or make covalent bonds in glucose metabolism, whereas the distinctive (13) C pattern in CAM sucrose probably indicates a substantial contribution of gluconeogenesis to glucose synthesis.

Performance evaluation of quantitative adiabatic (13)C NMR pulse sequences for site-specific isotopic measurements

(2)H/(1)H and (13)C/(12)C site-specific isotope ratios determined by NMR spectroscopy may be used to discriminate pharmaceutically active ingredients based on the synthetic process used in production. Extending the Site-specific Natural Isotope Fractionation NMR (SNIF-NMR) method to (13)C is highly beneficial for complex organic molecules when measurements of (2)H/(1)H ratios lead to poorly defined molecular fingerprints. The current NMR methodology to determine (13)C/(12)C site-specific isotope ratios suffers from poor sensitivity and long experimental times. In this work, several NMR pulse sequences based on polarization transfer were evaluated and optimized to measure precise quantitative (13)C NMR spectra within a short time. Adiabatic 180 degrees (1)H and (13)C pulses were incorporated into distortionless enhancement by polarization transfer (DEPT) and refocused insensitive nuclei enhanced by polarization transfer (INEPT) to minimize the influence of 180 degrees pulse imperfections and of off-resonance effects on the precision of the measured (13)C peak areas. The adiabatic DEPT sequence was applied to draw up a precise site-specific (13)C isotope profile of ibuprofen. A modified heteronuclear cross-polarization (HCP) experiment featuring (1)H and (13)C spin-locks with adiabatic 180 degrees pulses is also introduced. This sequence enables efficient magnetization transfer across a wide (13)C frequency range although not enough for an application in quantitative (13)C isotopic analysis.

Naturally Occurring Labdane Diterpene and Benzofuran from Globba pendula

Phytochemical investigation on Globba pendula resulted in the isolation of a new naturally occurring 16-oxo-(8)17-12-labdadien-15,11-olide 1 and benzofuran-2-carboxaldehyde 2. Other known compounds including isoandrographolide, indirubin, vanillin, vanillic acid, 2(3H)-benzoxazolone, as well as β-sitosteryl-β-D-glucopyranoside, β-sitosterol, and 7α-hydroxysitosterol were also isolated. The structures were established based on spectroscopic data and comparison with the literature. Furthermore, the compound isoandrographolide has demonstrated strong cytotoxic properties towards a panel of cancer cell lines (MCF-7, PC-3, and H-460) with the IC50 values of 7.9, 8.7, and 9.0 μM, respectively.

A comprehensive review on vanilla flavor: Extraction, isolation and quantification of vanillin and others constituents

Vanilla, being the world's most popular flavoring materials, finds extensive applications in food, beverages, perfumery and pharmaceutical industry. With the high demand and limited supply of vanilla pods and the continuing increase in their cost, numerous efforts of blending and adulteration in natural vanilla extracts have been reported. Thus, to ensure the quality of vanilla extracts and vanilla-containing products, it is important to develop techniques to verify their authenticity. Quantitatively, vanillin is the major compound present in the vanilla pods and the determination of vanillin is a vital consideration in natural vanilla extracts. This paper provides a comprehensive account of different extraction processes and chromatographic techniques applied for the separation, identification and determination of chemical constituents of vanilla. The review also provides an account of different methods applied for the quantification and the authentification of chemical constituents of vanilla extract. As the various properties of vanilla are attributed to its main constituent vanillin, its physico-chemical and bioactive properties have also been outlined.

Accurate Quantitative13C NMR Spectroscopy: Repeatability over Time of Site-Specific13C Isotope Ratio Determination

The stability over time (repeatability) for the determination of site-specific 13C/12C ratios at natural abundance by quantitative 13C NMR spectroscopy has been tested on three probes: enriched bilabeled [1,2-13C2]ethanol; ethanol at natural abundance; and vanillin at natural abundance. It is shown in all three cases that the standard deviation for a series of measurements taken every 2-3 months over periods between 9 and 13 months is equal to or smaller than the standard deviation calculated from 5-10 replicate measurements made on a single sample. The precision which can be achieved using the present analytical 13C NMR protocol is higher than the prerequisite value of 1-2 per thousand for the determination of site-specific 13C/12C ratios at natural abundance (13C-SNIF-NMR). Hence, this technique permits the discrimination of very small variations in 13C/12C ratios between carbon positions, as found in biogenic natural products. This observed stability over time in 13C NMR spectroscopy indicates that further improvements in precision will depend primarily on improved signal-to-noise ratio.

Adiabatic 1H decoupling scheme for very accurate intensity measurements in 13C NMR

Adiabatic proton decoupling has been optimized in order to obtain accurate quantitative measurements of intensities on 13C NMR spectra. For each offset, the minimum adiabaticity factor (Km) reached during the pulse was computed. This K(m) profile was used to optimize the peak value and the swept frequency range of the adiabatic pulses. With a cosinus amplitude modulation, offset-independent-adiabaticity, and the M4P5-M4P9-M4P5'-M4P9' phase cycle, an accuracy of 2 per thousand for the 13C NMR measurements was reached. An approach using bi-labeled 13C acetic acid and ethanol at 99% allowed a fine experimental determination of the uniformity of the decoupling profile. The comparison with WALTZ-16 highlights the improvements in the uniformity of the proton decoupling.

Effects of must concentration techniques on wine isotopic parameters

Despite the robustness of isotopic methods applied in the field of wine control, isotopic values can be slightly influenced by enological practices. For this reason, must concentration technique effects on wine isotopic parameters were studied. The two studied concentration techniques were reverse osmosis (RO) and high-vacuum evaporation (HVE). Samples (must and extracted water) have been collected in various French vineyards. Musts were microfermented at the laboratory, and isotope parameters were determined on the obtained wine. Deuterium and carbon-13 isotope ratios were studied on distilled ethanol by nuclear magnetic resonance (NMR) and isotope ratio mass spectrometry (IRMS), respectively. The oxygen-18 ratio was determined on extracted and wine water using IRMS apparatus. The study showed that the RO technique has a very low effect on isotopic parameters, indicating that this concentration technique does not create any isotopic fractionation, neither at sugar level nor at water level. The effect is notable for must submitted to HVE concentration: water evaporation leads to a modification of the oxygen-18 ratio of the must and, as a consequence, ethanol deuterium concentration is also modified.

Improvement of the inverse-gated-decoupling sequence for a faster quantitative analysis of various samples by 13C NMR spectroscopy

The inverse-gated-decoupling sequence enables quantitative (1)H decoupled (13)C spectra to be obtained. We modified this sequence so as to obtain the same result in less time for molecules containing carbons with various relaxation properties. For that, we determined the optimal (13)C longitudinal-magnetization initial value for a faster relaxation while (1)H decoupler is stopped. This value can be calculated precisely via the nuclear Overhauser effects, the longitudinal relaxation times, together with the determination of the relaxation rate constants of carbons while (1)H are out of equilibrium. A supplementary delay of (1)H decoupling and/or a series of selective pulses applied at the beginning of the recovery delay allow an acceleration of (13)C longitudinal relaxation. We applied this method to the molecule of vanillin. The simultaneous quantification of all carbons was carried out with a recovery delay divided by two compared to the usual sequence.

Authentication of the origin of vanillin using quantitative natural abundance 13C NMR

The use of 13C isotopic distribution as an efficient means to determine the origin of vanillin has been substantiated. Using quantitative 13C NMR, the 13C/12C ratios at all eight carbon positions can be exploited. On a set of 21 samples of vanillin from five different origins, complete discrimination can be achieved. It is shown that, for many purposes, a rapid analysis in which only five sites are used is sufficient. However, improved discrimination using all eight sites is preferable to differentiate between different methods of production from natural ferulic acid or between natural and lignin-derived vanillin on the basis of the 13C/12C ratios characteristic of different origins. The C1 and C8 positions are demonstrated to be the most significant sites for discrimination using principle component analysis. However, aromatic carbon positions make an essential contribution, notably in differentiating between natural and lignin-derived vanillin.