Integrated Light Collimating System for Extended Optical-Path-Length Absorbance Detection in Microchip-Based Capillary Electrophoresis

A microchip based Z-cell absorbance detector integrating micro-lenses and slits for portable liquid chromatography

A miniaturized microchip-based absorbance detector was developed for portable high-performance liquid chromatography (HPLC) to test glycated hemoglobin (HbA1c). The microchip integrating a Z-shaped cell, two collimating micro-lenses and two ink-filled optical slits is small in size (30 mm × 15 mm × 7 mm). The Z-shaped cell has a cross-sectional size of 500 μm × 500 μm and a physical optical path length of 2 mm. Two collimating micro-lenses were inserted in empty grooves on both sides of the cell, one micro-lens for collimating the initial light and the other for focusing the transmitted light. Optical slits on each end of the cell were used to block the stray light. Therefore, this detector indicated a low stray light level (0.011 %) and noise level (2.5 × 10-4 AU). This detector was applied for the commercial HPLC system to detect HbA1c level, and showed a low limit of detection (0.5 μg/mL) and excellent repeatability (≤ 2.03 %). The sensitivity was enhanced by 3.4 times when the optical path length was increased from 0.5 mm to 2 mm and the stray light was blocked by optical slits. The miniaturized microchip-based absorbance detector developed shows a great potential for application in portable and compact HPLC.

Droplet-based μChopper device with a 3D-printed pneumatic valving layer and a simple photometer for absorbance based fructosamine quantification in human serum

The development of microfluidic systems for biological assays presents challenges, particularly in adapting traditional optical absorbance assays to smaller volumes or to microfluidic formats. This often requires assay modification or translation to a fluorescence version, which can be impractical. To address this issue, our group has developed the μChopper device, which uses microfluidic droplet formation as a surrogate for an optical beam chopper, allowing for lock-in analysis and improved limits of detection with both absorbance and fluorescence optics without modifying the optical path length. Here, we have adapted the μChopper to low-cost optics using a light-emitting diode (LED) source and photodiode detector, and we have fabricated the pnuematically valved devices entirely by 3D printing instead of traditional photolithography. Using a hybrid device structure, fluidic channels were made in polydimethylsiloxane (PDMS) by moulding onto a 3D-printed master then bonding to a prefabricated thin layer, and the pneumatic layer was directly made of 3D-printed resin. This hybrid structure allowed an optical slit to be fabricated directly under fluidic channels, with the LED interfaced closely above the channel. Vacuum-operated, normally closed valves provided precise temporal control of droplet formation from 0.6 to 2.0 Hz. The system was validated against the standard plate reader format using a colorimetric fructosamine assay and by quantifying fructosamine in human serum from normal and diabetic patients, where strong correlation was shown. Showing a standard benefit of microfluidics in analysis, the device required 6.4-fold less serum volume for each assay. This μChopper device and lower cost optical system should be applicable to various absorbance based assays in low volumes, and the reliance on inexpensive 3D printers makes it more accessible to users without cleanroom facilities.

Particle Counting Methods Based on Microfluidic Devices

Particle counting serves as a pivotal constituent in diverse analytical domains, encompassing a broad spectrum of entities, ranging from blood cells and bacteria to viruses, droplets, bubbles, wear debris, and magnetic beads. Recent epochs have witnessed remarkable progressions in microfluidic chip technology, culminating in the proliferation and maturation of microfluidic chip-based particle counting methodologies. This paper undertakes a taxonomical elucidation of microfluidic chip-based particle counters based on the physical parameters they detect. These particle counters are classified into three categories: optical-based counters, electrical-based particle counters, and other counters. Within each category, subcategories are established to consider structural differences. Each type of counter is described not only in terms of its working principle but also the methods employed to enhance sensitivity and throughput. Additionally, an analysis of future trends related to each counter type is provided.

Rapid and Portable Detection of Hg and Cd in Grain Samples Based on Novel Catalytic Pyrolysis Composite Trap Coupled with Miniature Atomic Absorption Spectrometry

As toxic metals, Hg and Cd are a concern for food safety and human health; their rapid and portable analysis is still a challenge. A portable and rapid Hg-Cd analyzer constructed from a metal-ceramic heater (MCH)-based electrothermal vaporizer (ETV), an on-line catalytic pyrolysis furnace (CPF), a composite Pt/Ni trap, and a homemade miniature atomic absorption spectrometer (AAS) was proposed for grain analysis in this work. To enhance sensitivity, a new folded light path was designed for simultaneous Hg and Cd analysis using charge coupled device (CCD) in AAS. To eliminate the grain matrix interference, a catalytic pyrolysis furnace with aluminum oxide fillers was utilized to couple with a composite Pt/Ni trap. The method limits of detection (LODs) were 1.1 μg/kg and 0.3 μg/kg for Hg and Cd using a 20 mg grain sample, fulfilling the real sample analysis to monitor the grain contamination quickly; linearity R² > 0.995 was reached only using standard solution calibration, indicating the sample was free of grain matrix interference. The favorable analytical accuracy and precision were validated by analyzing real and certified reference material (CRM) grains with recoveries of 97-103% and 96-111% for Hg and Cd, respectively. The total analysis time was less than 5 min without sample digestion or use of any chemicals, and the instrumental size and power consumption were <14 kg and 270 W, respectively. Compared with other rapid methods, this newly designed Hg-Cd analyzer is proven to be simple, portable, and robust and is, thus, suitable to quickly monitor Hg and Cd contamination in the field to protect grain and food safety.

Fabricating SU-8 Photoresist Microstructures with Controlled Convexity-Concavity and Curvature through Thermally Manipulating Capillary Action in Poly(dimethylsiloxane) Microholes

We present a simple, robust, and cheap microfabrication method, based on thermally manipulating capillary action in poly(dimethylsiloxane) (PDMS) microholes, for preparing SU-8 curved microstructures. The microstructure morphology including convexity-concavity and curvature can be controlled via tuning the formation temperature. The convex SU-8 microspherical crowns with a height of 40 μm were formed at 10 °C, whereas the concave SU-8 microspherical crowns with a height of 90 μm were formed at 100 °C. The morphology of the microstructures is dictated by the thermally controlled combination of the pressure difference across the interface, contact angle, and surface tension. The fabricated microstructures with a spherical surface can be used as a microlens array or a mold for producing a microlens array. The clear and uniform images were observed using the generated microlens arrays. The equilibrium morphology of the microstructures can be predicted by numerical simulation, which can lessen the number of experiments and thus the design cost. The proposed method has the potential to find applications in industrial fields.

Advantages of optical fibers for facile and enhanced detection in droplet microfluidics

Droplet microfluidics offers a unique opportunity for ultrahigh-throughput experimentation with minimal sample consumption and thus has obtained increasing attention, particularly for biological applications. Detection and measurements of analytes or biomarkers in tiny droplets are essential for proper analysis of biological and chemical assays like single-cell studies, cytometry, nucleic acid detection, protein quantification, environmental monitoring, drug discovery, and point-of-care diagnostics. Current detection setups widely use microscopes as a central device and other free-space optical components. However, microscopic setups are bulky, complicated, not flexible, and expensive. Furthermore, they require precise optical alignments, specialized optical and technical knowledge, and cumbersome maintenance. The establishment of efficient, simple, and cheap detection methods is one of the bottlenecks for adopting microfluidic strategies for diverse bioanalytical applications and widespread laboratory use. Together with great advances in optofluidic components, the integration of optical fibers as a light guiding medium into microfluidic chips has recently revolutionized analytical possibilities. Optical fibers embedded in a microfluidic platform provide a simpler, more flexible, lower-cost, and sensitive setup for the detection of several parameters from biological and chemical samples and enable widespread, hands-on application much beyond thriving point-of-care developments. In this review, we examine recent developments in droplet microfluidic systems using optical fiber as a light guiding medium, primarily focusing on different optical detection methods such as fluorescence, absorbance, light scattering, and Raman scattering and the potential applications in biochemistry and biotechnology that are and will be arising from this.

High-resolution imaging and fast number estimation of suspended particles using dewetted polymer microlenses in a microfluidic channel

We have fabricated polymer micro-lens array by self-organized dewetting inside the microchannel, which shows remarkable enhancement in the resolution, contrast and more than 10 times add-on magnification to a microscope. These lenses are demonstrated to resolve sub-micrometer features and detect moving micro-particles when suspension is flown in a microchannel. Polystyrene (PS) micro-lenses are fabricated on a polydimethylsiloxane (PDMS) substrate using the controlled dewetting of PS thin film then this PDMS substrate is used to close the microchannel with inverted micro-lenses on it. An aqueous suspension of polystyrene particles is flown through the microchannel and we have observed the particles through an optical microscope. Focusing and magnification through PS micro-lenses is analyzed to get a quantitative estimate of the particle number density in the solution. This method offers a promising low-cost high throughput solution for determining the approximate number density of flowing particles or suitably stained biological cells. Particularly in a pathology lab it can tremendously increase detection limit by enabling visibility of sub-micrometer pathogens using a standard laboratory microscope.

[Recent advances in microchip liquid chromatography]

Miniaturization is an important trend in modern analytical instrument development, including miniaturized gas chromatography and liquid chromatography, as well as micro bore columns and capillary-to-microfluidics-based platforms. Apart from the miniaturization of the separation column, which is the core part of a chromatographic system, other parts of the system, including the sampler, pumping system, gradient generation, and detection systems, have been miniaturized. Miniaturized liquid chromatography significantly reduces solvent and sample consumption while providing comparable or even better separation efficiency. When liquid chromatography is coupled with mass spectroscopy, a low flow rate can increase the ionization efficiency, leading to enhanced sensitivity of the mass spectrometer. In contrast, normal-scale liquid chromatography suffers from its relatively high volumetric flow rate, which challenges the scanning frequency of the mass spectrometer. On the other hand because of the small sample size, other detection strategies such as spectrometric methods cannot provide sufficient sensitivity and limits of detection. In this sense, mass spectrometry has become the detection method of choice for micro-scale liquid-phase chromatography. Miniaturized liquid chromatography can diminish sample dilution efficiently when extremely small amounts of samples are used. The main driving force for this miniaturization trend, especially in liquid-phase separations, is the desperate need for microscale analyses of biological and clinical samples, given these samples are precious and the sample size is usually very small. At present, microscale liquid-phase chromatography is the only method of choice for such small, precious, and highly informative samples. The miniaturization of liquid chromatography systems, especially chromatographic columns, would be advantageous to the modularization and integration of liquid chromatography instrumental systems. Chip liquid chromatography is an integration of chromatography columns, liquid control systems, and detection methods on a single microfluidic chip. Chip liquid chromatography is an excellent format for the miniaturization of liquid chromatography systems, and it has already attracted significant attention from academia and industry. However, this attempt is challenging, and great effort is required on fundamental techniques, such as the substrate material of the microfluidic chip, structure of the micro-chromatography column, fluid control method, and detection methods, in order to make the chips suitable for liquid chromatography. Currently, the major problem in chip liquid chromatography is that the properties of the chip substrate materials cannot meet the requirements for further miniaturization and integration of chip liquid chromatography. The strength of the existing chip substrate materials is generally below 60 MPa, and the material properties limit further advances in the miniaturization and integration of chromatographic chips. Therefore, new chip substrate materials and the standard of chip channel design such as channel size and channel structure should be the key for further development of chip liquid chromatography. Mainstream instrumentation companies as well as new start-up innovation companies are now undertaking efforts toward the development of microchip liquid chromatographic products. Agilent, the first instrumentation company that introduced commercial microchip liquid chromatographic columns to the market, has led this field. Apart from microchip-based columns, Agilent introduced trap columns for different kinds of biological molecules as well as gradient generation systems for microchip-based liquid phase chromatography. Recently, another start-up company introduced microchip columns based on the in situ microfabrication of the column bed rather than packing the column with a particulate material. Such developments in microfabrication may further propel the advancement of micro-scale liquid-phase chromatography to an unprecedented level, which is beyond the conventional components and materials employed in normal-scale liquid chromatography. This review introduces the recent research progress in microchip liquid chromatography technologies, and briefly discusses the current state of commercialization of microchips for liquid chromatography by major instrumentation companies.

Optofluidic detection setup for multi-parametric analysis of microbiological samples in droplets

High-throughput microbiological experimentation using droplet microfluidics is limited due to the complexity and restricted versatility of the available detection techniques. Current detection setups are bulky, complicated, expensive, and require tedious optical alignment procedures while still mostly limited to fluorescence. In this work, we demonstrate an optofluidic detection setup for multi-parametric analyses of droplet samples by easily integrating micro-lenses and embedding optical fibers for guiding light in and out of the microfluidic chip. The optofluidic setup was validated for detection of absorbance, fluorescence, and scattered light. The developed platform was used for simultaneous detection of multiple parameters in different microbiological applications like cell density determination, growth kinetics, and antibiotic inhibition assays. Combining the high-throughput potential of droplet microfluidics with the ease, flexibility, and simplicity of optical fibers results in a powerful platform for microbiological experiments.

A simple and highly sensitive masking fluorescence detection system for capillary array electrophoresis and its application to food and medicine analysis

A high sampling rate, good stability, high throughput masking fluorescence detection system with easy positioning of each channel for capillary array electrophoresis was prepared and studied. A special mask combined with convex lenses was designed to modulate signals, without using any extra device to position each channel. The signal of each channel was detected by a photomultiplier tube, classified and saved by software. The design was used to evidently reduce the rotational vibration of optical components and to stabilize the system, so a high sampling rate was obtained by increasing the DC motor speed. To improve the optical system, optical fibers instead of conventional bulky optical components were used to transmit optical signal and to collect fluorescences in multiple directions, which greatly raised the sensitivity. Other important parameters including sampling rate, rotating speed and driven voltage laser diode (LDs) have also been investigated. Under optimal conditions, the performance of the detection system was evaluated. This novel system had a well-designed structure, and allowed independent multiple capillary operations and easy microanalysis. Its limit of detection for rhodamine 6G was 2.0 × 10^-2 µg/mL.

One step multi-material 3D printing for the fabrication of a photometric detector flow cell

Optical detection is the most common detection mode for many analytical assays. Photometric detection systems and their integration with analytical systems usually require several assembly parts and manual alignment of the capillary/tubing which affects sensitivity and repeatability. 3D printing is an innovative technology for the fabrication of integrated complex detection systems. One step multi-material 3D printing has been explored to fabricate a photometric detector flow cell from optically transparent and opaque materials using a dual-head FDM 3D printer. Integration of the microchannel, the detection window and the slit in a single device eliminates the need for manual alignment of fluidic and optical components, and hence improves sensitivity and repeatability. 3D printing allowed for rapid design optimisation by varying the slit dimension and optical pathlength. The optimised design was evaluated by determining stray light, effective path length and the signal to noise ratio using orange G. The optimised flow cell with extended path length of 10 mm and 500 μm slit yielded 0.02% stray light, 89% effective path length and detection limit of 2 nM. The sensitivity was also improved by 80% in the process of optimisation, using a blue 470 nm LED as a light source.

Coiled Optical Nanofiber for Optofluidic Absorbance Detection

A challenge for optofluidic absorbance detection is the high concentration limit of detection due to the short optical path length. Herein, we introduce a concept of utilizing the coiled optical nanofiber for highly sensitive and robust optofluidic absorbance detection. Investigated by measuring the absorbance of FeCl₃ solutions, the sensor shows a detection limit down to 10 μM with excellent reversibility in a concentration range of 0-5 mM. The sensitivity is 10-fold higher than that of standard absorbance measurement by using a 1 cm cuvette. Also, highly sensitive chloramphenicol sensing was demonstrated by using the enzyme-linked immunosorbent assay (ELISA) method, achieving a detection limit below 0.5 ng/L. The higher sensitivity and lower detection limit are caused by the large fractional power of evanescent field outside the nanofiber and the long detection length, which can effectively improve the absorption of the evanescent field, while the excellent reversibility is caused by the support of a polydimethylsiloxane (PDMS) pillar rather than by suspending the nanofiber in the microchannel. We envision that the present work may open up new opportunities for ultrasensitive chemical and biological sensing.

Replication of high refractive index glass microlens array by imprinting in conjunction with laser assisted rapid surface heating for high resolution confocal microscopy imaging

In a multi optical probe confocal imaging system utilizing a microlens arrays as an objective lens, a high numerical aperture is required to improve resolving power. Glass microlens arrays are suitable for high-resolution imaging since they provide outstanding optical properties with a high refractive index. We demonstrated the rapid fabrication of microlens arrays on a high refractive index optical glass substrate via laser assisted thermal imprinting. The optical performance of the fabricated glass microlens arrays were evaluated and compared to that of a polymer microlens. In contrast to the polymer, the real image afforded by, and the calculated resolution of, the imprinted glass microlens arrays were significantly better, at about 0.73 µm compared to the polymer (∼1.56 µm). Our results reveal the considerable potential of direct thermal imprinting as a rapid, single-step, low cost fabrication method for replication of glass microlens array of high dimensional accuracy affording excellent optical performance.

Design Techniques for Microfluidic Devices Implementation Applicable to Chemical Analysis Systems

This chapter provides a guide for microfluidic devices development and optimization focused on chemical analysis applications, which includes medicine, biology, chemistry, and environmental monitoring, showing high-level performance associated with a specific functionality. Examples are chemical analysis, solid phase extraction, chromatography, immunoassay analysis, protein and DNA separation, cell sorting and manipulation, cellular biology, and mass spectrometry. In this chapter, most information is related to microfluidic devices design and fabrication used to perform several steps concerning chemical analysis, process preparation of reagents, samples reaction and detection, regarding water quality monitoring. These steps are especially relevant to lab-on-chip (LOC) and micro-total-analysis-systems (μTAS). μTAS devices are developed in order to simplify analytical chemist work, incorporating several analytical procedures into flow systems. In the case of miniaturized devices, the analysis time is reduced, and small volumes (nL) can be used.

Fabrication of glass microlenses using focused Xe beam

Focused ion beam (FIB) systems based on high brightness plasma ion sources are becoming largely diffuse in material and semiconductor research, thanks to the higher current densities and milling rates provided by noble gas ions (e.g., Xe) compared with traditional liquid metal Ga FIBs. In this paper, we demonstrate the feasibility of a rapid, direct milling of microlenses in glass substrates using high current Xe plasma FIB. We present quantitative analyses of roughness and profile of microlenses with diameters up to 230-µm and focal distances between 7 mm and 1.4 mm. We characterized the performance of the lenses by mapping the transmitted intensity through the lenses, by forming an image of a resolution object by scanning the focused spot and collecting the transmitted intensity, and in full-field imaging experiments. The results indicate the applicability of plasma focused ion beam systems for direct writing in glass of high-quality micro-optical elements with diffraction-limited focusing.

A review on microscale polymerase chain reaction based methods in molecular diagnosis, and future prospects for the fabrication of fully integrated portable biomedical devices

Since the advent of microfabrication technology and soft lithography, the lab-on-a-chip concept has emerged as a state-of-the-art miniaturized tool for conducting the multiple functions associated with micro total analyses of nucleic acids, in series, in a seamless manner with a miniscule volume of sample. The enhanced surface-to-volume ratio inside a microchannel enables fast reactions owing to increased heat dissipation, allowing rapid amplification. For this reason, PCR has been one of the first applications to be miniaturized in a portable format. However, the nature of the basic working principle for microscale PCR, such as the complicated temperature controls and use of a thermal cycler, has hindered its total integration with other components into a micro total analyses systems (μTAS). This review (with 179 references) surveys the diverse forms of PCR microdevices constructed on the basis of different working principles and evaluates their performances. The first two main sections cover the state-of-the-art in chamber-type PCR microdevices and in continuous-flow PCR microdevices. Methods are then discussed that lead to microdevices with upstream sample purification and downstream detection schemes, with a particular focus on rapid on-site detection of foodborne pathogens. Next, the potential for miniaturizing and automating heaters and pumps is examined. The review concludes with sections on aspects of complete functional integration in conjunction with nanomaterial based sensing, a discussion on future prospects, and with conclusions. Graphical abstract In recent years, thermocycler-based PCR systems have been miniaturized to palm-sized, disposable polymer platforms. In addition, operational accessories such as heaters and mechanical pumps have been simplified to realize semi-automatted stand-alone portable biomedical diagnostic microdevices that are directly applicable in the field. This review summarizes the progress made and the current state of this field.

Toward miniaturized analysis of chemical identity and purity of radiopharmaceuticals via microchip electrophoresis

Miniaturized synthesis of positron emission tomography (PET) tracers is poised to offer numerous advantages including reduced tracer production costs and increased availability of diverse tracers. While many steps of the tracer production process have been miniaturized, there has been relatively little development of microscale systems for the quality control (QC) testing process that is required by regulatory agencies to ensure purity, identity, and biological safety of the radiotracer before use in human subjects. Every batch must be tested, and in contrast with ordinary pharmaceuticals, the whole set of tests of radiopharmaceuticals must be completed within a short-period of time to minimize losses due to radioactive decay. By replacing conventional techniques with microscale analytical ones, it may be possible to significantly reduce instrument cost, conserve lab space, shorten analysis times, and streamline this aspect of PET tracer production. We focus in this work on miniaturizing the subset of QC tests for chemical identity and purity. These tests generally require high-resolution chromatographic separation prior to detection to enable the approach to be applied to many different tracers (and their impurities), and have not yet, to the best of our knowledge, been tackled in microfluidic systems. Toward this end, we previously explored the feasibility of using the technique of capillary electrophoresis (CE) as a replacement for the "gold standard" approach of using high-performance liquid chromatography (HPLC) since CE offers similar separating power, flexibility, and sensitivity, but can readily be implemented in a microchip format. Using a conventional CE system, we previously demonstrated the successful separation of non-radioactive version of a clinical PET tracer, 3'-deoxy-3'-fluorothymidine (FLT), from its known by-products, and the separation of the PET tracer 1-(2'-deoxy-2'-fluoro-β-D-arabinofuranosyl)-cytosine (D-FAC) from its α-isomer, with sensitivity nearly as good as HPLC. Building on this feasibility study, in this paper, we describe the first effort to miniaturize the chemical identity and purity tests by using microchip electrophoresis (MCE). The fully automated proof-of-concept system comprises a chip for sample injection, a separation capillary, and an optical detection chip. Using the same model compound (FLT and its known by-products), we demonstrate that samples can be injected, separated, and detected, and show the potential to match the performance of HPLC. Addition of a radiation detector in the future would enable analysis of radiochemical identity and purity in the same device. We envision that eventually this MCE method could be combined with other miniaturized QC tests into a compact integrated system for automated routine QC testing of radiopharmaceuticals in the future. Graphical abstract Miniaturized quality control (QC) testing of batches of radiopharmaceuticals via microfluidic analysis. The proof-of-concept hybrid microchip electrophoresis (MCE) device demonstrated the feasibility of achieving comparable performance to conventional analytical instruments (HPLC or CE) for chemical purity testing.

Micro-optics for microfluidic analytical applications

This critical review summarizes the developments in the integration of micro-optical elements with microfluidic platforms for facilitating detection and automation of bio-analytical applications.

Differential detection photothermal spectroscopy: towards ultra-fast and sensitive label-free detection in picoliter & femtoliter droplets

Despite the growing importance of droplet-based microfluidics in high-throughput experimentation, few current methods allow the sensitive measurement of absorbance within rapidly moving droplets. To address this significant limitation, we herein present the application of differential detection photothermal interferometry (DDPI) for single-point absorbance quantification in pL- and fL-volume droplets. To assess the efficacy of our approach, we initially measure absorbance in 100 pL droplets at frequencies in excess of 1 kHz and determine a detection limit of 1.4 μmol L^-1 for Erythrosin B (A = 3.8 × 10^-4). Subsequently, we apply the method to the analysis of fL-volume droplets and droplets generated at frequencies in excess of 10 kHz. Finally, we demonstrate the utility of DDPI as a detection scheme for colorimetric assays. Specifically, we extract the Michaelis-Menten constant for the reaction of β-galactosidase and chlorophenol-red-β-d-galactopyranoside and monitor the metabolomic activity of a population of HL-60 cells at the single cell level. Results establish single-point absorbance detection as a powerful, sensitive and rapid alternative to fluorescence for a wide range of assays within segmented flows.

On-Chip Photothermal Analyte Detection Using Integrated Luminescent Temperature Sensors

Optical absorbance detection based on attenuated light transmission is limited in sensitivity due to short path lengths in microfluidic and other miniaturized platforms. An alternative is detection using the photothermal effect. Herein we introduce a new kind of photothermal absorbance measurement using integrated luminescent temperature sensor spots inside microfluidic channels. The temperature sensors were photopolymerized inside the channels from NOA 81 UV-curable thiolene prepolymer doped with a tris(1,10-phenanthroline)ruthenium(II) temperature probe. The polymerized sensing structures were as small as 26 ± 3 μm in diameter and displayed a temperature resolution of better than 0.3 K between 20 and 50 °C. The absorbance from 532 nm laser excitation of the food dye Amaranth as a model analyte was quantified using these spots, and the influence of the flow rate, laser power, and concentration was investigated. Calibration yielded a linear relationship between analyte concentration and the temperature signal in the channels. The limit of detection for the azo-dye Amaranth (E123) in this setup was 13 μM. A minimal detectable absorbance of 3.2 × 10^-3 AU was obtained using an optical path length of 125 μm in this initial study. A microreactor with integrated temperature sensors was then employed for an absorbance-based miniaturized nitrite analysis, yielding a detection limit of 26 μM at a total assay time of only 75 s. This technique is very promising for sensitive, and potentially spatially resolved, optical absorbance detection on the micro- and nanoscale.

Total polyphenols content in white wines on a microfluidic flow injection analyzer with embedded optical fibers

Absorbance detection in food microdevices has not been thoroughly used due to low levels of sensitivity in measurements. Thus, it is necessary to develop microfluidic methods for improving photometric detection. For this purpose, a simple coupled-optical-fiber-polydimethylsiloxane (PDMS) microdevice was developed, to quantify polyphenols content in white wine employing the Folin-Ciocalteu reaction method. A 6V and 10W halogen lamp with an optical path length of 7mm between optical fibers, which were placed into the microchip, using guides at the outlet of the flow, increased the level of sensitivity during detection. The linear range was from 0.03mmol/L to 0.18mmol/L. Thus, the corresponding equation was: Abs=4.00(±0.16) [tannic acid]+0.17(±0.017). Intra-laboratory repeatability and reproducibility percentages were 2.95% and 6.84%, respectively. Such results were compared to those obtained from applying the conventional flow-injection analysis method, based on the same type of reaction. The relative error between methods was less than 13%.

Investigation and application of photochemically induced direct UV detection of low or non-UV absorbing compounds by capillary electrophoresis

Some low or non-UV absorbing compounds like amino acids might be accessible to direct UV detection by capillary electrophoresis (CE), due to the photochemical reaction in the detection window of the separation capillary under extremely strong alkaline conditions. However, with regards to the photochemical reaction procedure and the influencing factors in CE, no comprehensive studies have been done. Herein, two strategies were applied to investigate the photochemical reaction mechanism including the introduction of an additional UV lamp and the utilization of driving pressure. The former confirmed the occurrence of photolysis, while the latter solved the interference of electroosmotic flow (EOF). Furthermore, the online photochemical reaction and online preconcentration technique were combined to develop a rapid, simple and sensitive method for determination of seven essential amino acids (valine, leucine, phenylalanine, methionine, tryptophan, threonine and lysine). Eventually, the developed method was successfully applied to the analysis of real samples with good reproducibility and reliability. This novel and simple method, based on the photochemical reactions occurring in the detection window and coupling with online preconcentration techniques, shows a great potential for the rapid and sensitive detection of low or non-UV absorbing compounds.

Sandwich-format 3D printed microfluidic mixers: a flexible platform for multi-probe analysis

We report on a microfluidic mixer fabrication platform that increases the versatility and flexibility of mixers for biomolecular applications. A sandwich-format design allows the application of multiple spectroscopic probes to the same mixer. A polymer spacer is 'sandwiched' between two transparent windows, creating a closed microfluidic system. The channels of the mixer are defined by regions in the polymer spacer that lack material and therefore the polymer need not be transparent in the spectral region of interest. Suitable window materials such as CaF₂ make the device accessible to a wide range of optical probe wavelengths, from the deep UV to the mid-IR. In this study, we use a commercially available 3D printer to print the polymer spacers to apply three different channel designs into the passive, continuous-flow mixer, and integrated them with three different spectroscopic probes. All three spectroscopic probes are applicable to each mixer without further changes. The sandwich-format mixer coupled with cost-effective 3D printed fabrication techniques could increase the applicability and accessibility of microfluidic mixing to intricate kinetic schemes and monitoring chemical synthesis in cases where only one probe technique proves insufficient.

In situ fabrication of a tunable microlens

We demonstrate an optofluidic variable-focus microlens formed by a solid polydimethylsiloxane (PDMS) meniscus channel wall and a tunable liquid lens body. A novel method for in situ fabrication of the meniscus channel wall is developed by introducing liquid PDMS prepolymer into a microchannel followed by curing. Three-light manipulation techniques including tunable optical focusing, collimating, and diverging are realized by varying the refractive index (RI) of liquid lens body. Also, we present an absorption measurement of methylene blue (MB) with a collimated probing light, achieving a detection limit of 0.25 μM by using a 5-mm-long detection cell.

An integrated microspectrometer for localised multiplexing measurements

We describe the development of an integrated lensed Arrayed Waveguide Grating (AWG) microspectrometer for localized multiplexing fluorescence measurements. The device, which has a footprint that is only 1 mm wide and 1 cm long, is capable of spectroscopic measurements on chip. Multiple fluorescence signals were measured simultaneously based upon simple intensity readouts from a CCD camera. We also demonstrate the integration of the AWG spectrometer with a microfluidic platform using a lensing function to confine the beam shape for focused illumination. This capability enhances signal collection, gives better spatial resolution, and provides a route for the analysis of small volume samples (e.g. cells) in flow. To show these capabilities we developed a novel "bead-AWG" platform with which we demonstrate localized multiplexed fluorescence detection either simultaneously or successively. Such an integrated system provides the basis for a portable system capable of optical detection of multi-wavelength fluorescence from a single defined location.

Self-regulated, droplet-based sample chopper for microfluidic absorbance detection

Akin to optical beam chopping, we demonstrate that formation and routing of aqueous droplets in oil can chop a fluidic sample to permit phase sensitive detection. This hand-operated microfluidic sample chopper (μChopper) greatly reduces the detection limit of molecular absorbance in a 27 μm optical path. With direct dependence on path length, absorbance is fundamentally incompatible with microfluidics. While other microfluidic absorbance approaches use complex additions to fabrication, such as fiber coupling and increased optical paths, this self-regulated μChopper uses opposing droplet generators to passively alternate sample and reference droplets at ~10 Hz each. Each droplet's identity is automatically locked-in to its generator, allowing downstream lock-in analysis to nearly eliminate large signal drift or 1/f noise. With a lock-in time constant of 1.9 s and total interrogated volume of 59 nL (122 droplets), a detection limit of 3.0 × 10(-4) absorbance units or 500 nM bromophenol blue (BPB) (29 fmol) was achieved using only an optical microscope and a standard, single-depth (27 μm) microfluidic device. The system was further applied to nanoliter pH sensing and validated with a spectrophotometer. The μChopper represents a fluidic analog to an optical beam chopper, and the self-regulated sample/reference droplet alternation promotes ease of use.

Ultra-sensitive microfibre absorption detection in a microfluidic chip

We report a microfibre absorption sensor by using a 900 nm diameter silica microfibre embedded in a 125 μm wide microchannel with a detection length of 2.5 cm. Investigated by measuring the absorbance of methylene blue (MB), the sensor shows a detection limit down to 50 pM with excellent reversibility in a concentration range of 0-5 nM. The sensor has also been applied to bovine serum albumin (BSA) measurement, with a detection limit of 10 fg mL(-1). In addition, the sample volume requirement is merely 500 nL with a probing light power of about 150 nW, which is very promising for safe detection of single or a few molecules of biological specimens.

Detection of immunoglobulins in a laser induced fluorescence system utilizing polydimethysiloxane microchips with advanced surface and optical properties

We developed an automated laser induced fluorescence system utilizing microfluidic chips for detection and quantification of immunoglobulins. Microchips were fabricated from polydimethysiloxane (PDMS) using the so-called "prepolymerization technique." The microchip structure helped minimize the effects of PDMS autofluorescence and light scattering. Furthermore, a thin and uniform PDMS layer forming the top of the microchip enabled proper focusing and collection of the excitation beam and the emitted fluorescence, respectively. The developed system was tested for the detection of mouse immunoglobulins. The capturing antibodies were immobilized on internal microchannel walls in the form of a polyelectrolyte. We clearly show that this immobilization technique, if correctly realized, gives results with high reproducibility. After sample incubation and washing, secondary antibodies labeled by fluorescein isothiocyanate were introduced into microchannels to build a detectable complex. We show that mouse antibodies can be quantified in a wide concentration range, 0.01-100 μg ml(-1). The lower detection limit was below 0.001 μg ml(-1) (6.7 pM). The developed laser induced fluorescence (LIF) apparatus is relatively cheap and easy to construct. The total cost of the developed LIF detector is lower than a typical price of plate readers. If compared to classical ELISA (enzyme linked immunosorbent assay) plate systems, the detection of immunoglobulins or other proteins in the developed PDMS microfluidic device brings other important benefits such as reduced time demands (10 min incubation) and low reagent consumption (less than 1 μl). The cost of the developed PDMS chips is comparable with the price of commercial ELISA plates. The main troubleshooting related to the apparatus development is also discussed in order to help potential constructors.

Biosensors in microfluidic chips

A biosensor is a sensing device that incorporates a biological sensing element and a transducer to produce electrochemical, optical, mass, or other signals in proportion to quantitative information about the analytes in the given samples. The microfluidic chip is an attractive miniaturized platform with valuable advantages, e.g., low cost analysis requiring low reagent consumption, reduced sample volume, and shortened processing time. Combination of biosensors and microfluidic chips enhances analytical capability so as to widen the scope of possible applications. This review provides an overview of recent research activities in the field of biosensors integrated on microfluidic chips, focusing on the working principles, characteristics, and applicability of the biosensors. Theoretical background and applications in chemical, biological, and clinical analysis are summarized and discussed.

Review Article: Recent advancements in optofluidic flow cytometer

There is an increasing need to develop optofluidic flow cytometers. Optofluidics, where optics and microfluidics work together to create novel functionalities on a small chip, holds great promise for lab-on-a-chip flow cytometry. The development of a low-cost, compact, handheld flow cytometer and microfluorescence-activated cell sorter system could have a significant impact on the field of point-of-care diagnostics, improving health care in, for example, underserved areas of Africa and Asia, that struggle with epidemics such as HIV∕AIDS. In this paper, we review recent advancements in microfluidics, on-chip optics, novel detection architectures, and integrated sorting mechanisms.

Fully integrated PDMS/SU-8/quartz microfluidic chip with a novel macroporous poly dimethylsiloxane (PDMS) membrane for isoelectric focusing of proteins using whole-channel imaging detection

A fully integrated polydimethylsiloxane (PDMS)/modified PDMS membrane/SU-8/quartz hybrid chip was developed for protein separation using isoelectric focusing (IEF) mechanism coupled with whole-channel imaging detection (WCID) method. This microfluidic chip integrates three components into one single chip: (i) modified PDMS membranes for separating electrolytes in the reservoirs from the sample in the microchannel and thus reducing pressure disturbance, (ii) SU-8 optical slit to block UV light (below 300 nm) outside the channel aiming to increase detection sensitivity, and (iii) injection and discharge capillaries for continuous operation. Integration of all these components on a single chip is challenging because it requires fabrication techniques for perfect bonding between different materials and is prone to leakage and blockage. This study has addressed all the challenges and presented a fully integrated chip, which is more robust with higher sensitivity than the previously developed IEF chips. This chip was tested by performing protein and pI marker separation. The separation results obtained in this chip were compared with that obtained in commercial cartridges. Side-by-side comparison validated the developed chip and fabrication techniques.

Formation and characterization of an ideal excitation beam geometry in an optofluidic device

An optimal excitation beam shape is necessary to perform reliable flow cytometric analysis but has so far not been implemented in a photonic-microfluidic integrated (i.e. optofluidic) device. We have achieved this feature by integrating a 1D lens system with planar waveguides and microfluidic channel on a substrate using one patterning material via a one-shot process. In this paper, we report the method of design and the performance of specifically formed excitation regions shaped to be ideal for reducing double detections, improving SNR, and for reliable detection in a flow cytometry application. Demonstration of different sizes via changes to lens design shows the ability to control the width of the shaped beam according to a targeted detection.

Microfabricated polymer chip with integrated U-bend waveguides for evanescent field absorption based detection

A mu-TAS system for evanescent field absorption with integrated polymer waveguides is reported for the first time. A photoresist SU-8 layer is patterned into a microchannel network, with U-bend waveguides and fiber-to-waveguide coupler structures. The aim of this study was to explore the possibility of using evanescent field absorption based sensing in conjunction with capillary electrophoresis for label free detection. We have proposed a novel design to couple the microchannel network with U-bend waveguides in a single step patterning of SU-8. In this novel design, the optical waveguide forms part of the microchannel wall, which aids in the detection process. The suitability of the device for optical applications was proved by absorbance measurement between 450 and 780 nm using Methylene Blue dye. Absorbance measurements were done by passing various concentrations of dye solutions through 200 microm and 500 microm microchannels. The device was also found sensitive to the refractive index (RI) of fluid flowing in the channel. The RI sensitivity was tested by passing sucrose solutions of varying concentrations through the channels and measuring absorbance across the integrated U-bend waveguides. The results indicate that such structures can be used easily for label free detection of molecules either by evanescent wave absorption or by changes associated with RI changes in the microenvironment around a waveguide.

Fabrication of a hybrid PDMS/SU-8/quartz microfluidic chip for enhancing UV absorption whole-channel imaging detection sensitivity and application for isoelectric focusing of proteins

A poly(dimethylsiloxane)(PDMS)/SU-8/quartz hybrid chip was developed and applied in the isoelectric focusing (IEF) of proteins with ultraviolet (UV) absorbance-based whole-channel imaging detection (UV-WCID). Each hybrid chip was made of three layers: a PDMS flat top substrate, a bottom quartz substrate and a middle layer of SU-8 photoresist. The SU-8 serves two purposes: it contains the microchannel used for IEF separation, and acts as an optical slit that absorbs UV light below 300 nm improving detection sensitivity in WCID. The novel hybrid design demonstrates a two to three times improvement in sensitivity over a comparable PDMS/PDMS design. In addition, the hybrid chip exhibits increased heat dissipation due to the superior thermal conductivity of the bottom quartz substrate allowing for larger electric fields to be used in separations. The hybrid design with IEF-UV-WCID was successful in resolving a complicated sample, hemoglobin control, with high fidelity.

Innovations in optical microfluidic technologies for point-of-care diagnostics

Despite a growing focus from the academic community, the field of microfluidics has yet to produce many commercial devices for point-of-care (POC) diagnostics. One of the main reasons for this is the difficulty in producing low-cost, sensitive, and portable optical detection systems. Although electrochemical methods work well for certain applications, optical detection is generally regarded as superior and is the method most widely employed in laboratory clinical chemistry. Conventional optical systems, however, are costly, require careful alignment, and do not translate well to POC devices. Furthermore, many optical detection paradigms such as absorbance and fluorescence suffer at smaller geometries because the optical path length through the sample is shortened. This review examines the innovative techniques which have recently been developed to address these issues. We highlight microfluidic diagnostic systems which demonstrate practical integration of sample preparation, analyte enrichment, and optical detection. We also examine several emerging detection paradigms involving nanoengineered materials which do not suffer from the same miniaturization disadvantages as conventional measurements.

Microfluidics and photonics for Bio-System-on-a-Chip: a review of advancements in technology towards a microfluidic flow cytometry chip

Microfluidics and photonics come together to form a field commonly referred to as 'optofluidics'. Flow cytometry provides the field with a technology base from which both microfluidic and photonic components be developed and integrated into a useful device. This article reviews some of the more recent developments to familiarize a reader with the current state of the technologies and also highlights the requirements of the device and how researchers are working to meet these needs.

Microchip capillary electrophoresis for frontal analysis of free bilirubin and study of its interaction with human serum albumin

To meet the need for bedside monitoring of free bilirubin for neonates under critical conditions, a microfluidic chip was fabricated and tested for its coupling with CE/frontal analysis (FA) to determine free bilirubin and study of its binding interaction with HSA, which regulated its concentration in plasma. The poly(methyl methacrylate) (PMMA) multichannel chip was fabricated by CO2 laser ablation and bonded with a fused-silica separation capillary for CE/FA separation with UV detection. The chip was designed to allow a complete assay of four electrophoretic runs using preconditioned channels to speed up the determination of free bilirubin and to deliver quick results for bedside monitoring. Under optimized conditions, the linear working range for free bilirubin was from 10 to 200 micromol with RSDs from 2.1 to 5.0% for n=3, and the LOD at 9 micromol for S/N=3. From a binding study between bilirubin and HSA under FA condition, the second binding constant for bilirubin-HSA was determined as 1.07x10(5) L/mol and the number of binding sites per HSA as 3.46. The results enabled the calculation of free bilirubin for jaundiced infants based on the clinically significant level of total bilirubin, producing a range of 118.3-119.4 micromol/L. The developed method is shown to meet the clinical requirement with additional margin of protection to detect the early rising level of free bilirubin prior to jaundice condition. The low-cost microchip CE/FA device is shown to produce quick results with high potential to deliver a suitable bed-side monitoring method for bilirubin management in neonates.