PNA-DNA hybridization study using labeled streptavidin by voltammetry and surface plasmon fluorescence spectroscopy

Peptide-Based Flavivirus Biosensors: From Cell Structure to Virological and Serological Detection Methods

In tropical and developing countries, mosquito-borne diseases by flaviviruses pose a serious threat to public health. Early detection is critical for preventing their spread, but conventional methods are time-consuming and require skilled technicians. Biosensors have been developed to address this issue, but cross-reactivity with other flaviviruses remains a challenge. Peptides are essentially biomaterials used in diagnostics that allow virological and serological techniques to identify flavivirus selectively. This biomaterial originated as a small protein consisting of two to 50 amino acid chains. They offer flexibility in chemical modification and can be easily synthesized and applied to living cells in the engineering process. Peptides could potentially be developed as robust, low-cost, sensitive, and selective receptors for detecting flaviviruses. However, modification and selection of the receptor agents are crucial to determine the effectiveness of binding between the targets and the receptors. This paper addresses two potential peptide nucleic acids (PNAs) and affinity peptides that can detect flavivirus from another target-based biosensor as well as the potential peptide behaviors of flaviviruses. The PNAs detect flaviviruses based on the nucleotide base sequence of the target's virological profile via Watson-Crick base pairing, while the affinity peptides sense the epitope or immunological profile of the targets. Recent developments in the functionalization of peptides for flavivirus biosensors are explored in this Review by division into electrochemical, optical, and other detection methods.

Miniaturization of CRISPR/Cas12-Based DNA Sensor Array by Non-Contact Printing

DNA microarrays have been applied for comprehensive genotyping, but remain a drawback in complicated operations. As a solution, we previously reported the solid-phase collateral cleavage (SPCC) system based on the clustered regularly interspaced short palindromic repeat/CRISPR-associated protein 12 (CRISPR/Cas12). Surface-immobilized Cas12-CRISPR RNA (crRNA) can directly hybridize target double-stranded DNA (dsDNA) and subsequently produce a signal via the cleavage of single-stranded DNA (ssDNA) reporter immobilized on the same spot. Therefore, SPCC-based multiplex dsDNA detection can be performed easily. This study reports the miniaturization of SPCC-based spots patterned by a non-contact printer and its performance in comprehensive genotyping on a massively accumulated array. Initially, printing, immobilization, and washing processes of Cas12-crRNA were established to fabricate the non-contact-patterned SPCC-based sensor array. A target dsDNA concentration response was obtained based on the developed sensor array, even with a spot diameter of 0.64 ± 0.05 mm. Also, the limit of detection was 572 pM, 531 pM, and 3.04 nM with 40, 20, and 10 nL-printing of Cas12-crRNA, respectively. Furthermore, the sensor array specifically detected three dsDNA sequences in one-pot multiplexing; therefore, the feasibility of comprehensive genotyping was confirmed. These results demonstrate that our technology can be miniaturized as a CRISPR/Cas12-based microarray by using non-contact printing. In the future, the non-contact-patterned SPCC-based sensor array can be applied as an alternative tool to DNA microarrays.

Miniaturized Rapid Electrochemical Immunosensor Based on Screen Printed Carbon Electrodes for Mycobacterium tuberculosis Detection

In 2019, over 21% of an estimated 10 million new tuberculosis (TB) patients were either not diagnosed at all or diagnosed without being reported to public health authorities. It is therefore critical to develop newer and more rapid and effective point-of-care diagnostic tools to combat the global TB epidemic. PCR-based diagnostic methods such as Xpert MTB/RIF are quicker than conventional techniques, but their applicability is restricted by the need for specialized laboratory equipment and the substantial cost of scaling-up in low- and middle-income countries where the burden of TB is high. Meanwhile, loop-mediated isothermal amplification (LAMP) amplifies nucleic acids under isothermal conditions with a high efficiency, helps in the early detection and identification of infectious diseases, and can be performed without the need for sophisticated thermocycling equipment. In the present study, the LAMP assay was integrated with screen-printed carbon electrodes and a commercial potentiostat for real time cyclic voltammetry analysis (named as the LAMP-Electrochemical (EC) assay). The LAMP-EC assay was found to be highly specific to TB-causing bacteria and capable of detecting even a single copy of the Mycobacterium tuberculosis (Mtb) IS6110 DNA sequence. Overall, the LAMP-EC test developed and evaluated in the present study shows promise to become a cost-effective tool for rapid and effective diagnosis of TB.

Application of peptide nucleic acid in electrochemical nucleic acid biosensors

The early diagnosis of major diseases, such as malignant tumors, has always been an important field of research. Through screening, early detection of such diseases, and timely and effective treatment can significantly improve the survival rate of patients and reduce medical costs. Therefore, the development of a simple detection method with high sensitivity and strong specificity, and that is low cost is of great significance for the diagnosis and prognosis of the disease. Electrochemical DNA biosensing analysis is a technology based on Watson Crick base complementary pairing, which uses the capture probe of a known sequence to specifically recognize the target DNA and detect its concentration. Because of its advantages of low cost, simple operation, portability, and easy miniaturization, it has been widely researched and has become a cutting-edge topic in the field of biochemical analysis and precision medicine. However, the existing methods for electrochemical DNA biosensing analysis have some shortcomings, such as poor stability and specificity of capture probes, insufficient detection sensitivity, and long detection cycles. In this review, we focus on improving the sensitivity and practicability of electrochemical DNA biosensing analysis methods and summarize a series of research work carried out by using electrically neutral peptide nucleic acid as an immobilized capture probe.

Electrochemically mediated in situ growth of electroactive polymers for highly sensitive detection of double-stranded DNA without sequence-preference

The ability to directly detect double-stranded DNA (dsDNA) without sequence-preference continues to be a major challenge. Herein, we report an electrochemical method for the direct, highly sensitive detection of dsDNA based on the strand replacement of dsDNA by peptide nucleic acid (PNA) and the in situ growth of electroactive polymers through the surface-initiated electrochemically mediated atom transfer radical polymerization (SI-eATRP). Thiolated PNA molecules are firstly self-assembled onto gold electrode surface for the specific recognition of target dsDNA (dsDNA-T), which in turn leads to the formation of a high density of PNA/DNA heteroduplexes on the electrode surface for the subsequent attachment of ATRP initiators via the phosphate-Zr⁴⁺-carboxylate chemistry. By applying a negative potential to the electrode, the air-stable Cu^II deactivators can be reduced into the Cu^I activators so as to trigger the surface-initiated polymerization for the in situ growth of electroactive polymers. Due to the strand replacement of dsDNA by PNA, dsDNA can be directly detected without sequence-preference. Besides, the growth of polymers enables the modification of numerous electroactive probes, thereby greatly improving the electrochemical signal. Under optimal conditions, a good linearity between the electrochemical signal and the logarithm of dsDNA-T concentration over the range from 1.0 fM to 1.0nM, with a detection limit of 0.47 fM, can be obtained. Results indicate that it is highly selective, and holds high anti-interference capability in the presence of human serum samples. Therefore, this method offers great promises in providing a universal and efficient solution for the direct detection of dsDNA.

Integrated label-free silicon nanowire sensor arrays for (bio)chemical analysis

We present a label-free (bio)chemical analysis platform that uses all-electrical silicon nanowire sensor arrays integrated with a small volume microfluidic flow-cell for real-time (bio)chemical analysis and detection. The integrated sensing platform contains an automated multi-sample injection system that eliminates erroneous sensor responses from sample switching due to flow rate fluctuations and provides precise sample volumes down to 10 nl. Biochemical sensing is demonstrated with real-time 15-mer DNA-PNA (peptide nucleic acid) duplex hybridization measurements from different sample concentrations in a low ionic strength, and the equilibrium dissociation constant KD ≈ 140 nM has been extracted from the experimental data using the first order Langmuir binding model. Chemical sensing is demonstrated with pH measurements from different injected samples in flow that have sensitivities consistent with the gate-oxide materials. A differential sensor measurement configuration results in a 30× reduction in sensor drift. The integrated label-free analysis platform is suitable for a wide range of small volume chemical and biochemical analyses.

Charge-neutral morpholino microarrays for nucleic acid analysis

A principal challenge in microarray experiments is to facilitate hybridization between probe strands on the array with complementary target strands from solution while suppressing any competing interactions that the probes and targets may experience. Synthetic DNA analogs, whose hybridization to targets can exhibit qualitatively different dependence on experimental conditions than for nucleic acid probes, open up an attractive alternative for improving selectivity of array hybridization. Morpholinos (MOs), a class of uncharged DNA analogs, are investigated as microarray probes instead of DNA. MO microarrays were fabricated by contact printing of amino-modified probes onto aldehyde slides. In addition to covalent immobilization, MOs were found to efficiently immobilize through physical adsorption; such physically adsorbed probes could be removed by post-printing washes with surfactant solutions. Hybridization of double-stranded DNA targets to MO microarrays revealed a hybridization maximum at intermediate ionic strengths. The decline in hybridization at lower ionic strengths was attributed to an electrostatic barrier accumulated from hybridized DNA targets, whereas at higher ionic strengths it was attributed to stabilization of target secondary structure in solution. These trends, which illustrate ionic strength tuning of forming on-array relative to solution secondary structure, were supported by a stability analysis of MO/DNA and DNA/DNA duplexes in solution.

Patterning of peptide nucleic acids using reactive microcontact printing

PNAs (peptide nucleic acids) have been immobilized onto surfaces in a fast, accurate way by employing reactive microcontact printing. Surfaces have been first modified with aldehyde groups to react with the amino end of the synthesized PNAs. When patterning fluorescein-labeled PNAs by reactive microcontact printing using oxygen-oxidized polydimethylsiloxane stamps, homogeneous arrays were fabricated and characterized using optical methods. PNA-patterned surfaces were hybridized with complementary and mismatched dye-labeled oligonucleotides to test their ability to recognize DNA sequences. The stability and selectivity of the PNA-DNA duplexes on surfaces have been verified by fluorescence microscopy, and the melting curves have been recorded. Finally, the technique has been applied to the fabrication of chips by spotting a PNA microarray onto a flat PDMS stamp and reproducing the same features onto many slides. The chips were finally applied to single nucleotide polymorphism detection on oligonucleotides.

Molecular mechanisms in morpholino-DNA surface hybridization

Synthetic nucleic acid mimics provide opportunity for redesigning the specificity and affinity of hybridization with natural DNA or RNA. Such redesign is of great interest for diagnostic applications where it can enhance the desired signal against a background of competing interactions. This report compares hybridization of DNA analyte strands with morpholinos (MOs), which are uncharged nucleic acid mimics, to the corresponding DNA-DNA case in solution and on surfaces. In solution, MO-DNA hybridization is found to be independent of counterion concentration, in contrast to DNA-DNA hybridization. On surfaces, when immobilized MO or DNA "probe" strands hybridize with complementary DNA "targets" from solution, both the MO-DNA and DNA-DNA processes depend on ionic strength but exhibit qualitatively different behaviors. At lower ionic strengths, MO-DNA surface hybridization exhibits hallmarks of kinetic limitations when separation between hybridized probe sites becomes comparable to target dimensions, whereas extents of DNA-DNA surface hybridization are instead consistent with limits imposed by buildup of surface (Donnan) potential. The two processes also fundamentally differ at high ionic strength, under conditions when electrostatic effects are weak. Here, variations in probe coverage have a much diminished impact on MO-DNA than on DNA-DNA hybridization for similarly crowded surface conditions. These various observations agree with a structural model of MO monolayers in which MO-DNA duplexes segregate to the buffer interface while unhybridized probes localize near the solid support. A general perspective is presented on using uncharged DNA analogues, which also include compounds such as peptide nucleic acids (PNA), in surface hybridization applications.

Direct detection and discrimination of double-stranded oligonucleotide corresponding to hepatitis C virus genotype 3a using an electrochemical DNA biosensor based on peptide nucleic acid and double-stranded DNA hybridization

Development of an electrochemical DNA biosensor for the direct detection and discrimination of double-stranded oligonucleotide (dsDNA) corresponding to hepatitis C virus genotype 3a, without its denaturation, using a gold electrode is described. The electrochemical DNA sensor relies on the modification of the gold electrode with 6-mercapto-1-hexanol and a self-assembled monolayer of 14-mer peptide nucleic acid probe, related to the hepatitis C virus genotype 3a core/E1 region. The increase of differential pulse voltammetric responses of methylene blue, upon hybridization of the self-assembled probe with the target ds-DNA to form a triplex is the principle behind the detection and discrimination. Some hybridization experiments with non-complementary oligonucleotides were carried out to assess whether the developed DNA sensor responds selectively to the ds-DNA target. Diagnostic performance of the biosensor is described and the detection limit was found to be 1.8 x 10(-12) M in phosphate buffer solution, pH 7.0. The relative standard deviation of measurements of 100 pM of target ds-DNA performed with three independent probe-modified electrodes was 3.1%, indicating a remarkable reproducibility of the detection method.

Electrochemical detection of oligonucleotide by attaching redox probes onto its backbone

An approach was demonstrated to detect oligonucleotide by attaching redox probes onto its backbone. First, peptide nucleic acid (PNA) with a neutral backbone was immobilized onto a gold (Au) electrode surface as a capture. Second, when the PNA capture hybridized with a target oligonucleotide (a short DNA), an assembly of Au-PNA-DNA formed and phosphate groups were thus brought into the assembly from the DNA's backbone. The linker ion of Zr(4+) exhibits a strong coordination interaction with the phosphate group and the carboxylic group. The hybridized target DNA provides the phosphate group while a derivatized redox probe of ferrocene (Fc) carboxyl acid offers the carboxylic group. Therefore, the redox probe can be attached to the phosphate group by the linker to form an assembly of Au-PNA-DNA-Zr-Fc. Its redox process was studied and the detection conditions of oligonucleotide were optimized. A limit of detection of 1.0×10(-12) M or ∼2 attomol was reached.

Direct profiling of cancer biomarkers in tumor tissue using a multiplexed nanostructured microelectrode integrated circuit

The analysis of panels of nucleic acid biomarkers offers valuable diagnostic and prognostic information for cancer management. A cost-effective, highly sensitive electronic chip would offer an ideal platform for clinical biomarker readout and would have maximal utility if it was (i) multiplexed, enabling on-chip assays of multiple biomarkers, and (ii) able to perform direct (PCR-free) readout of disease-related genes. Here we report a chip onto which we integrate novel nanostructured microelectrodes and with which we directly detect cancer biomarkers in heterogeneous biological samples-both cell extracts and tumor tissues. Coarse photolithographic microfabrication defines a multiplexed sensing array; bottom-up fabrication of nanostructured microelectrodes then provides sensing elements. We analyzed a panel of mRNA samples for prostate cancer related gene fusions using the chip. We accurately identified gene fusions that correlate with aggressive prostate cancer and distinguished these from fusions associated with slower-progressing forms of the disease. The multiplexed nanostructured microelectrode integrated circuit reported herein provides direct, amplification-free, sample-to-answer in under 1 h using the 10 ng of mRNA readily available in biopsy samples.

Metal-enhanced chemiluminescence: advanced chemiluminescence concepts for the 21st century

Chemiluminescent-based detection is entrenched throughout the biosciences today, such as in blotting, analyte and protein quantification and detection. While the biological applications of chemiluminescence are forever growing, the underlying principles of using a probe, an oxidizer and a catalyst (biological, organic or inorganic) have remained mostly unchanged for decades. Subsequently, chemiluminescence-based detection is fundamentally limited by the classical photochemical properties of reaction yield, quantum yield, etc. However, over the last 5 years, a new technology has emerged which looks set to fundamentally change the way we both think about and use chemiluminescence today. Metal surface plasmons can amplify chemiluminescence signatures, while low-power microwaves can complete reactions within seconds. In addition, thin metal films can convert spatially isotopic chemiluminescence into directional emission. In this forward looking tutorial review, we survey what could well be the next-generation chemiluminescent-based technologies.

Direct electrocatalytic mRNA detection using PNA-nanowire sensors

We report an electrochemical nucleic acids sensing system that exhibits high sensitivity and specificity when challenged with heterogeneous samples of RNA. The platform directly detects specific RNA sequences in cellular and clinical samples without any sample labeling or PCR amplification. The sensor features an electrode platform consisting of three-dimensional gold nanowires, and DNA or RNA hybridization is detected using an electrocatalytic reporter system. In this study, probes made of peptide nucleic acid (PNA) are used to detect a newly identified cancer biomarkera gene fusion recently associated with prostate cancer. The system is able to detect the fusion sequence with 100 fM sensitivity, and retains high sensitivity even in the presence of a large excess of non-complementary sequences. Moreover, the sensor is able to detect the fusion sequence in as little as 10 ng of mRNA isolated from cell lines or 100 ng total RNA from patient tissue samples. The PNA-nanowire nucleic acids sensor described is one of the first electrochemical sensors to directly detect specific mRNAs in unamplified patient samples.

Comparison of different supramolecular architectures for oligonucleotide biosensing

This work describes a comparative study between two biosensing platforms that are commonly used to immobilize capture probes. These platforms refer to thiolated and biotinylated oligonucleotide strands chemisorbed on Au surfaces (DNA SAM) and bioconjugated on streptavidin (SA) monolayers (SA SAM), respectively. Both interfacial architectures were studied using surface acoustic wave (SAW) devices and surface plasmon spectroscopy (SPR). Our studies indicated that DNA SAM platforms enable higher densities of surface-confined oligonucleotide probes. However, their hybridization efficiency is lower when compared to that obtained in SA SAM platforms, thus impacting on a lower detection limit, 5 nM. Furthermore, binding of SA molecules to the biotinylated targets, in an attempt to enhance the signal in both platforms, revealed striking differences between both architectures. The SA underlayer used in the SA SAM configuration confers nonfouling characteristics to the interfacial assembly, thus precluding the nonspecific binding of SA onto the surface. The antifouling behavior of the SA DNA platform is an important feature to be considered in the amplification of hybridization events through the bioconjugation of biotinylated targets with streptavidin-based tags.

Target label-free, reagentless electrochemical DNA biosensor based on sub-optimum displacement

One of the most time consuming and complex steps in the detection of DNA target with a biosensor is the previous labeling of the target. In this paper, a novel target label-free, reagentless and easy to use DNA biosensor is reported. Electrochemical transduction (cyclic voltammetry, differential pulse voltammetry and impedance spectroscopy) and optical red out by surface plasmon resonance were chosen for the platform optimization. This target label-free DNA detection method is based on displacement of sub-optimum labeled oligonucleotide. This strategy requires the pre-hybridization of the capture probe immobilized on the electrode surface with a sub-optimum mutated oligonucleotide pre-labeled with an electrochemically active ferrocene moiety. Due to the higher affinity of the target that is fully complementary to the capture probe, the sub-optimum ferrocene-labeled sequence is displaced when the fully complementary target is introduced into the system. The decrease of the electrochemical signal from the ferrocene verifies the presence of the target, which is proportional to the target concentration. A variation of this strategy was employed to enhance the ferrocene signal. A diffusional mediator, ferrocyanide, was introduced in the system to help in this purpose. This platform attains a stable, specific and reproducible response (5-15%), with a detection limit in the range of microM. This electrochemical sensor is the first example of this kind of sensor to detect cystic fibrosis, however, this configuration could be generically applied to any application where the detection of a DNA target is involved.

Recent advances in surface plasmon resonance based techniques for bioanalysis

Surface plasmon resonance (SPR) is a powerful and versatile spectroscopic method for biomolecular interaction analysis (BIA) and has been well reviewed in previous years. This updated 2006 review of SPR, SPR spectroscopy, and SPR imaging explores cutting-edge technology with a focus on material, method, and instrument development. A number of recent SPR developments and interesting applications for bioanalysis are provided. Three focus topics are discussed in more detail to exemplify recent progress. They include surface plasmon fluorescence spectroscopy, nanoscale glassification of SPR substrates, and enzymatic amplification in SPR imaging. Through these examples it is clear to us that the development of SPR-based methods continues to grow, while the applications continue to diversify. Major trends appear to be present in the development of combined techniques, use of new materials, and development of new methodologies. Together, these works constitute a major thrust that could eventually make SPR a common tool for surface interaction analysis and biosensing. The future outlook for SPR and SPR-associated BIA studies, in our opinion, is very bright. Surface plasmon resonance (SPR) is a powerful and versatile spectroscopic method for biomolecular interaction analysis (BIA) and has been well reviewed in previous years. This updated 2006 review of SPR, SPR spectroscopy, and SPR imaging explores cutting-edge technology with a focus on material, method, and instrument development. A number of recent SPR developments and interesting applications for bioanalysis are provided. Three focus topics are discussed in more detail to exemplify recent progress. They include surface plasmon fluorescence spectroscopy, nanoscale glassification of SPR substrates, and enzymatic amplification in SPR imaging. Through these examples it is clear to us that the development of SPR-based methods continues to grow, while the applications continue to diversify. Major trends appear to be present in the development of combined techniques, use of new materials, and development of new methodologies. Together, these works constitute a major thrust that could eventually make SPR a common tool for surface interaction analysis and biosensing. The future outlook for SPR and SPR-associated BIA studies, in our opinion, is very bright.