Ranking the Susceptibility of Disulfide Bonds in Human IgG1 Antibodies by Reduction, Differential Alkylation, and LC−MS Analysis

A simplified non-reduced peptide mapping method with faster and efficient enzymatic digestion for characterization of native disulfide bonds in monoclonal and bispecific antibodies

Development of monoclonal and bispecific antibody-based protein therapeutics requires detailed characterization of native disulfide linkages, which is commonly achieved through peptide mapping under non-reducing conditions followed by liquid chromatography-mass spectrometry (LC-MS) analysis. One major challenge of this method is incomplete protein digestion due to insufficient denaturation of antibodies under non-reducing conditions. For a long time, researchers have explored various strategies with the aim of efficiently digesting antibody drugs when the disulfide bonds remain intact, but few could achieve this by using a simple and generic approach with well controlled disulfide scrambling artifacts. Here, we report a simple method for fast and efficient mapping of native disulfides of monoclonal and bispecific antibody-based protein therapeutics. The method was optimized to achieve optimal digestion efficiency by denaturing proteins with 8 M urea plus 0-1.25 M guanidine-HCl at elevated temperature (50 °C), followed by two-step digestion with trypsin/Lys-C mix using a one-pot reaction. The only parameter that needs to be optimized for different proteins is the concentration of guanidine-HCl present. This simplified sample preparation eliminated buffer exchange and can be completed within three hours. By using this new method, all native disulfide bonds were confirmed for these monoclonal and bispecific antibodies with high confidence. When compared with a commercial kit utilizing low-pH digestion condition, the new method demonstrated higher digestion efficiency and shorter sample preparation time. These results suggest this new one-pot-two-step digestion method is suitable for the characterization of antibody disulfide bonds, particularly for those antibodies with digestion-resistant domains under typical digestion conditions.

Characterization of a Monoclonal Antibody by Native and Denaturing Top-Down Mass Spectrometry

Established in recent years as an important approach to unraveling the heterogeneity of intact monoclonal antibodies, native mass spectrometry has been rarely utilized for sequencing these complex biomolecules via tandem mass spectrometry. Typically, top-down mass spectrometry has been performed starting from highly charged precursor ions obtained via electrospray ionization under denaturing conditions (i.e., in the presence of organic solvents and acidic pH). Here we systematically benchmark four distinct ion dissociation methods─namely, higher-energy collisional dissociation, electron transfer dissociation, electron transfer dissociation/higher-energy collisional dissociation, and 213 nm ultraviolet photodissociation─in their capability to characterize a therapeutic monoclonal antibody, trastuzumab, starting from denatured and native-like precursor ions. Interestingly, native top-down mass spectrometry results in higher sequence coverage than the experiments carried out under denaturing conditions, with the exception of ultraviolet photodissociation. Globally, electron transfer dissociation followed by collision-based activation of product ions generates the largest number of backbone cleavages in disulfide protected regions, including the complementarity determining regions, regardless of electrospray ionization conditions. Overall, these findings suggest that native mass spectrometry can certainly be used for the gas-phase sequencing of whole monoclonal antibodies, although the dissociation of denatured precursor ions still returns a few backbone cleavages not identified in native experiments. Finally, a comparison of the fragmentation maps obtained under denaturing and native conditions strongly points toward disulfide bonds as the primary reason behind the largely overlapping dissociation patterns.

EThcD as a Unique Tool for the Top-Down De Novo Sequencing of Intact Natural Ranid Amphibian Peptides

De novo sequencing of any novel peptide/protein is a difficult task. Full sequence coverage, isomeric amino acid residues, inter- and intramolecular S-S bonds, and numerous other post-translational modifications make the investigators employ various chemical modifications, providing a variety of specific fragmentation MSn patterns. The chemical processes are time-consuming, and their yields never reach 100%, while the subsequent purification often leads to the loss of minor components of the initial peptide mixture. Here, we present the advantages of the EThcD method that enables establishing the full sequence of natural intact peptides of ranid frogs in de novo top-down mode without any chemical modifications. The method provides complete sequence coverage, including the cyclic disulfide section, and reliable identification of isomeric leucine/isoleucine residues. The proposed approach demonstrated its efficiency in the analysis of peptidomes of ranid frogs from several populations of Rana arvalis, Rana temporaria, and Pelophylax esculentus complexes.

CE-MS/MS and CE-timsTOF to separate and characterize intramolecular disulfide bridges of monoclonal antibody subunits and their application for the assessment of subunit reduction protocols

Characterization at the subunit level enables detailed mass spectrometric characterization of posttranslational modifications (PTMs) of monoclonal antibodies (mAbs). The implemented reduction often leaves the intramolecular disulfide bridges intact. Here, we present a capillary electrophoretic (CE) method based on a neutral-coated capillary for the separation of immunoglobulin G-degrading enzyme of Streptococcus pyogenes (IdeS) digested and reduced mAb subunits followed by mass spectrometry (MS), MS/MS identification, and trapped ion mobility mass spectrometry (timsTOF). Our CE approach enables the separation of (i) different subunit moieties, (ii) various reduction states, and (iii) positional isomers of these partly reduced subunit moieties. The location of the remaining disulfide bridges can be determined by middle-down electron transfer higher energy collisional dissociation (EThcD) experiments. All these CE-separated variants show differences in ion mobility in the timsTOF measurements. Applying the presented CE-MS/MS method, reduction parameters such as the use of chaotropic salts were studied. For the investigated antibodies, urea improved the subunit reduction significantly, whereas guanidine hydrochloride (GuHCl) leads to multiple signals of the same subunit in the CE separation. The presented CE-MS method is a powerful tool for the disulfide-variant characterization of mAbs on the subunit level. It enables understanding disulfide bridge reduction processes in antibodies and potentially other proteins.

Overcoming the Dilemma of In Vivo Stable Adhesion and Sustained Degradation by the Molecular Design of Polyurethane Adhesives for Bone Fracture Repair

Bone adhesive is a promising candidate to revolutionize the clinical treatment of bone repairs. However, several drawbacks have limited its further clinical application, such as unreliable wet adhesive performance leading to fixation failure and poor biodegradability inhibiting bone tissue growth. By incorporating catechol groups and disulfide bonds into polyurethane (PU) molecules, an injectable and porous PU adhesive is developed with both superior wet adhesion and biodegradability to facilitate the reduction and fixation of comminuted fractures and the subsequent regeneration of bone tissue. The bone adhesive can be cured within a reasonable time acceptable to a surgeon, and then the wet bone adhesive strength is near 1.30 MPa in 1 h. Finally, the wet adhesive strength to the cortical bone will achieve about 1.70 MPa, which is also five times more than nonresorbable poly(methyl methacrylate) bone cement. Besides, the cell culture experiments also indicate that the adhesives show excellent biocompatibility and osteogenic ability in vitro. Especially, it can degrade in vivo gradually and promote fracture healing in the rabbit iliac fracture model. These results demonstrate that this ingenious bone adhesive exhibits great potential in the treatment of comminuted fractures, providing fresh insights into the development of clinically applicable bone adhesives.

In-Depth Structure and Function Characterization of Heterogeneous Interchain Cysteine-Conjugated Antibody-Drug Conjugates

Antibody-drug conjugates (ADCs), integrating high specificity of antigen-targeting antibodies and high potency of cell-killing chemical drugs, have become one of the most rapidly expanding therapeutic biologics in oncology. Although ADCs were widely studied from multiple aspects, overall structural elucidation with comprehensive understanding of variants is scarcely reported. Here, for the first time, we present a holistic and in-depth characterization of an interchain cysteine-conjugated ADC, focusing on conjugation and charge heterogeneity, and in vitro biological activities. Conjugation mapping utilized a bottom-up approach, unraveled positional isomer composition, provided insights into the conjugation process, and elucidated how conjugation affects the physicochemical and biological properties of an ADC. Charge profiling combined bottom-up and top-down approaches to interrogate the origin of charge heterogeneity, its impact on function, and best practice for characterization. Specifically, we pioneered the utilization of capillary isoelectric focusing-mass spectrometry to decode not only critical post-translational modifications but also drug load and positional isomer distribution. The study design provides general guidance for in-depth characterization of ADCs, and the analytical findings in turn benefit the discovery and development of future ADCs.

Mass Spectrometric De Novo Sequencing of Natural Peptides

Natural peptides secreted under stress conditions by many organisms are bioactive molecules with a broad spectrum of activities. These molecules could become potential models for novel pharmaceuticals, to which bacteria, according to modern scientific concepts, do not have and cannot develop resistance. Taking this into consideration, it is necessary to clarify the amino acid sequences of such peptides. Here we describe our approach to de novo sequencing of amphibians' skin secretion peptides.

Orthogonal Hydroxyl Functionalization of cGAMP Confers Metabolic Stability and Enables Antibody Conjugation

cGAMP is a signaling molecule produced by the cGAS-DNA complex to establish antimicrobial and antitumor immunity through STING. Whereas STING activation holds potential as a new strategy to treat cancer, cGAMP is generally considered unsuitable for in vivo use because of the rapid cleavage of its phosphodiester linkages and the limited cellular uptake under physiological conditions. Consequently, phosphorothioation and fluorination are commonly used to improve the metabolic stability and permeability of cGAMP and its synthetic analogues. We now show that methylation of the 3'-hydroxyl group of cGAMP also confers metabolic stability and that acylation of the 2'-hydroxyl group can be achieved directly and selectively to enable receptor-mediated intracellular delivery. Unlike phosphorothioation and fluorination, these modifications do not create a new stereogenic center and do not require laborious building block synthesis. As such, orthogonal hydroxyl functionalization is a simple solution to issues associated with the in vivo use of cGAMP.

Heterogeneity in Disulfide Bond Reduction in IgG1 Antibodies Is Governed by Solvent Accessibility of the Cysteines

We studied unpaired cysteine levels and disulfide bond susceptibility in four different γ-immunoglobulin antibodies using liquid chromatography-mass spectrometry. Our choice of differential alkylating agents ensures that the differential peaks are non-overlapping, thus allowing us to accurately quantify free cysteine levels. For each cysteine residue, we observed no more than 5% to be unpaired, and the free cysteine levels across antibodies were slightly higher in those containing lambda light chains. Interchain and hinge residues were highly susceptible to reducing stresses and showed a 100-1000-fold higher rate of reduction compared to intrachain cysteines. Estimations of the solvent-accessible surface for individual cysteines in IgG1, using an implicit all-atom molecular dynamics simulation, show that interchain and hinge cysteines have >1000-fold higher solvent accessibility compared to intrachain cysteines. Further analyses show that solvent accessibility and the rate of reduction are linearly correlated. Our work clearly establishes the fact that a cysteine's accessibility to the surrounding solvent is one of the primary determinants of its disulfide bond stability.

Protein-Specific Signal Peptides for Mammalian Vector Engineering

Expression of recombinant proteins in mammalian cell factories relies on synthetic assemblies of genetic parts to optimally control flux through the product biosynthetic pathway. In comparison to other genetic part-types, there is a relative paucity of characterized signal peptide components, particularly for mammalian cell contexts. In this study, we describe a toolkit of signal peptide elements, created using bioinformatics-led and synthetic design approaches, that can be utilized to enhance production of biopharmaceutical proteins in Chinese hamster ovary cell factories. We demonstrate, for the first time in a mammalian cell context, that machine learning can be used to predict how discrete signal peptide elements will perform when utilized to drive endoplasmic reticulum (ER) translocation of specific single chain protein products. For more complex molecular formats, such as multichain monoclonal antibodies, we describe how a combination of in silico and targeted design rule-based in vitro testing can be employed to rapidly identify product-specific signal peptide solutions from minimal screening spaces. The utility of this technology is validated by deriving vector designs that increase product titers ≥1.8×, compared to standard industry systems, for a range of products, including a difficult-to-express monoclonal antibody. The availability of a vastly expanded toolbox of characterized signal peptide parts, combined with streamlined in silico/in vitro testing processes, will permit efficient expression vector re-design to maximize titers of both simple and complex protein products.

Determination of label efficiency and label degree of critical reagents by LC-MS and native MS

Degree of labeling and label efficiency are key factors for optimal characterization of critical reagents that are used in ligand binding assays. Here, three case studies are shown demonstrating how liquid chromatography-mass spectrometry (LC-MS) was utilized to characterize critical reagents using three unique methodologies. Critical reagent batches were prepared for LC-MS analysis by use of: 20 mM dithiothreitol (DTT) (Case 1), rapid PNGaseF (Case 2), and a mobile phase diluent (Case 3). LC-MS was run at three different MS method conditions in each troubleshooting case specific for reduced IgG, intact IgG, and native LC-MS, respectively. Specified LC-MS methods based on sample type and configuration elucidated clear MS profiles, allowing for degree of labeling and label efficiencies to be calculated. Ultimately the LC-MS analyses were fine-tuned for critical reagent characterization, and practices for analyzing similar reagents in the future can be established.

Interplay of heavy chain introns influences efficient transcript splicing and affects product quality of recombinant biotherapeutic antibodies from CHO cells

Introns are included in genes encoding therapeutic proteins for their well-documented function of boosting expression. However, mis-splicing of introns in recombinant immunoglobulin (IgG) heavy chain (HC) transcripts can produce amino acid sequence product variants. These variants can affect product quality; therefore, purification process optimization may be needed to remove them, or if they cannot be removed, then in-depth characterization must be carried out to understand their effects on biological activity. In this study, HC transgene engineering approaches were investigated and were successful in significantly reducing the previously identified IgG HC splice variants to <0.5%. Subsequently, a comprehensive evaluation was conducted to understand the influence of the different introns in the HC genes on the expression of recombinant biotherapeutic antibodies. The data revealed an unexpected cooperation between specific introns for efficient splicing, where intron retention led to significant reductions in IgG expression of up to 75% for some intron combinations. Furthermore, it was shown that HC introns could be fully removed without significantly affecting productivity. This work paves the way for future biotherapeutic antibody transgene design with regard to inclusion of HC introns. By removing unnecessary introns, transgene mRNA transcript will no longer be mis-spliced, thereby eliminating HC splice variants and improving antibody product quality.

Instability Challenges and Stabilization Strategies of Pharmaceutical Proteins

Maintaining the structure of protein and peptide drugs has become one of the most important goals of scientists in recent decades. Cold and thermal denaturation conditions, lyophilization and freeze drying, different pH conditions, concentrations, ionic strength, environmental agitation, the interaction between the surface of liquid and air as well as liquid and solid, and even the architectural structure of storage containers are among the factors that affect the stability of these therapeutic biomacromolecules. The use of genetic engineering, side-directed mutagenesis, fusion strategies, solvent engineering, the addition of various preservatives, surfactants, and additives are some of the solutions to overcome these problems. This article will discuss the types of stress that lead to instabilities of different proteins used in pharmaceutics including regulatory proteins, antibodies, and antibody-drug conjugates, and then all the methods for fighting these stresses will be reviewed. New and existing analytical methods that are used to detect the instabilities, mainly changes in their primary and higher order structures, are briefly summarized.

Elucidating chemical and disulfide heterogeneities in rituximab using reduced and non-reduced peptide mapping

Peptide mapping by liquid chromatography-mass spectrometry is the gold standard to characterize post-translational modifications and disulfide bonds. The structural integrity, heterogeneity, and quality of biotherapeutic proteins are evaluated via reduced and non-reduced peptide mapping methods. However, non-enzymatic artifacts are often induced during sample preparation when alkaline pH conditions are used. To minimize these artifacts, methods using various acidic pH conditions have been developed by multiple researchers. However, these may lead to missed and non-specific cleavages during the analysis. In this study, improved reduced and non-reduced peptide mapping method has been proposed to characterize endogenous chemical modifications and native disulfide bonds of monoclonal antibody -based products. Solubilization has been carried out at acidic pH conditions under high temperature, followed by the addition of tris (2-carboxyethyl) phosphine as a reducing agent and a low alkylating agent. It was observed that the non-enzymatic post-translational modifications and non-native disulfide scrambled peptides significantly reduced under trypsin plus Lys-C digestion conditions at acidic pH as compared to the traditional methods. The results demonstrate that the proposed peptide mapping method using trypsin plus Lys-C could identify and quantify various chemical and disulfide heterogeneities with minimal artifacts. This article is protected by copyright. All rights reserved.

Development and Application of an Analytical Approach to Assess an Antibody's Potential for Disulfide Reduction

Monoclonal antibody (mAb) interchain disulfide bond reduction has been observed in a recent large-scale clinical manufacturing operation. A massive reduction/precipitation at post-clarification steps has occurred. This note presents the development of a novel analytical approach to identify the "potential reduction" - a unique approach to predict the propensity of a monomeric-profiled mAb to be reduced in the post-harvest stage, such as harvest clarification and/or purification steps. The core of this new approach includes comparing the non-reducing capillary electrophoresis profiles of pre- and post-vacuum treated mAb in harvest cell culture fluid (HCCF). Using this approach, the potential reductions of two in-house mAbs in the unclarified and clarified cell culture harvest were assessed. This article is protected by copyright. All rights reserved.

Development of a simple non-reduced peptide mapping method that prevents disulfide scrambling of mAbs without affecting tryptic enzyme activity

Non-reduced peptide mapping by liquid chromatography-mass spectrometry (LC-MS) analysis is a commonly used method for disulfide linkage characterization to assess structural integrity and quality of therapeutic monoclonal antibodies (mAbs). However, disulfide scrambling artifacts induced during sample preparation are often observed when basic pH and high temperatures are used during denaturation and digestion. To minimize disulfide scrambling artifacts, methods using various acidic pH conditions have been developed by multiple groups. However, lower pH conditions increase missed and non-specific cleavages, which complicates disulfide bond analysis because the majority of enzymes used in protein characterization are most efficient at alkaline pH. Here, we developed a non-reduced peptide mapping method for mAb characterization that minimizes disulfide scrambling at basic pH by adding an oxidizing agent, cystamine, and a low concentration of iodoacetamide (IAA) alkylating agent. Two human IgG1 mAbs, one with kappa light chain and another one with lambda light chain, were used as model proteins to develop and optimize the method. Using this novel method, disulfide scrambled peptides related to light chain-heavy chain (LC-HC) inter-disulfide disruption were significantly reduced with high reproducibility compared to conventional methods. Results demonstrated that the cystamine-added method is robust and minimizes disulfide scrambling artifacts produced during sample preparation.

Generation of bispecific antibodies using chemical conjugation methods

Bispecific antibodies combine the specificity of two antibodies into one molecule. During the past two decades, advancement in protein engineering enabled the development of more than 100 bispecific formats, three of which are approved by the FDA for clinical use. In parallel to protein engineering methods, advancement in conjugation chemistries have spurred the use of chemical engineering approaches to generate bispecific antibodies. Herein, we review selected chemical strategies employed to generate bispecific antibodies that cannot be made using protein engineering methods.

Untargeted proteomics reveals upregulation of stress response pathways during CHO-based monoclonal antibody manufacturing process leading to disulfide bond reduction

Monoclonal antibody (mAb) interchain disulfide bond reduction can cause a loss of function and negatively impact the therapeutic’s efficacy and safety. Disulfide bond reduction has been observed at various stages during the manufacturing process, including processing of the harvested material. The factors and mechanisms driving this phenomenon are not fully understood. In this study, we examined the host cell proteome as a potential factor affecting the susceptibility of a mAb to disulfide bond reduction in the harvested cell culture fluid (HCCF). We used untargeted liquid-chromatography-mass spectrometry-based proteomics experiments in conjunction with a semi-automated protein identification workflow to systematically compare Chinese hamster ovary (CHO) cell protein abundances between bioreactor conditions that result in reduction-susceptible and reduction-free HCCF. Although the growth profiles and antibody titers of these two bioreactor conditions were indistinguishable, we observed broad differences in host cell protein (HCP) expression. We found significant differences in the abundance of glycolytic enzymes, key protein reductases, and antioxidant defense enzymes. Multivariate analysis of the proteomics data determined that upregulation of stress-inducible endoplasmic reticulum (ER) and other chaperone proteins is a discriminatory characteristic of reduction-susceptible HCP profiles. Overall, these results suggest that stress response pathways activated during bioreactor culture increase the reduction-susceptibility of HCCF. Consequently, these pathways could be valuable targets for optimizing culture conditions to improve protein quality.

Optimization and kinetic modeling of interchain disulfide bond reoxidation of monoclonal antibodies in bioprocesses

Disulfide bonds play a crucial role in folding and structural stabilization of monoclonal antibodies (mAbs). Disulfide bond reduction may happen during the mAb manufacturing process, resulting in low molecular weight species and possible failure to meet product specifications. Although many mitigation strategies have been developed to prevent disulfide reduction, to the best of our knowledge, reforming disulfide bonds from the reduced antibody in manufacturing has not previously been reported. Here, we explored a novel rescue strategy in the downstream process to repair the broken disulfide bonds via in-vitro redox reactions on Protein A resin. Redox conditions including redox pair (cysteine/cystine ratio), pH, temperature, and reaction time were examined to achieve high antibody purity and a high reaction rate. Under the optimal redox condition, >90% reduced antibody could be reoxidized to form an intact antibody on Protein A resin in an hour. In addition, this study showed high flexibility on the range of the intact mAb fraction in the initial reduced mAb sample (the lower limit of intact mAb faction could be 14% based on the data reported in this study). Furthermore, a kinetic model based on elementary oxidative reactions was constructed to help optimize the reoxidation conditions and to predict product purity. Together, the deep understanding of interchain disulfide bond reoxidation, combined with the predictive kinetic model, provided a good foundation to implement a rescue strategy to generate high-purity antibodies with substantial cost savings in manufacturing processes.

Investigation of monoclonal antibody dimers in a final formulated drug by separation techniques coupled to native mass spectrometry

Therapeutic monoclonal antibodies (mAbs) are highly complex proteins that must be exhaustively characterized according to the regulatory authorities' recommendations. MAbs display micro-heterogeneity mainly due to their post-translational modifications, but also to their susceptibility to chemical and physical degradations. Among these degradations, aggregation is quite frequent, initiated by protein denaturation and then dimer formation. Here, we investigated the nature and structure of the high molecular weight species (HMW) present at less than 1% in an unstressed formulated roledumab biopharmaceutical, as a model of high purity mAb. HMW species were first purified through preparative size-exclusion chromatography (SEC) and then analyzed by a combination of chromatographic methods (ion-exchange chromatography (IEX), SEC) coupled to native mass spectrometry (MS), as well as sodium dodecyl sulfate–polyacrylamide gel electrophoresis and capillary gel electrophoresis under non-reducing conditions. Both covalently and non-covalently bound dimers were identified at a proportion of 50/50. In-depth characterization of the HMW fraction by SEC and IEX hyphenated to native MS revealed the presence of three mAb dimer forms having the same mass, but differing by their charge and size. They were attributed to different compact and elongated dimers. Finally, high-resolution middle-up approaches using different enzymes (IdeS and IgdE) were performed to determine the mAb domains implicated in the dimerization. Our results revealed that the roledumab dimers were associated mainly by a single Fab-to-Fab arm-bound association.

Prevention of Fab-arm exchange and antibody reduction via stabilization of the IgG4 hinge region

IgG4s are dynamic molecules that undergo a process called Fab-arm exchange. Disulfide bonds between heavy chains are transiently reduced, resulting in half antibodies that reform intact antibodies with other IgG4 half antibodies. In vivo, therapeutic IgG4s can recombine with endogenous IgG4s, resulting in a heterogeneous mixture of bispecific antibodies. A related issue that can occur for any therapeutic protein during manufacturing is interchain disulfide bond reduction. For IgG4s, this primarily results in high levels of half-mAb that persist through purification processes. The S228P mutation has been used to prevent half-mAb formation. However, we demonstrated that IgG4s with the S228P mutation are subject to half-mAb formation and Fab-arm exchange in reducing environments. We identified two novel mutations that stabilize the heavy-heavy chain interaction via incorporation of additional disulfide bonds in the hinge region. Individually, these mutations increase stability toward reduction and lessen Fab-arm exchange. Combination of all three mutations, Y219C, G220C, and S228P, has an additive benefit resulting in an IgG4 with ˃7-fold increase in stability toward reduction while preventing Fab-arm exchange. Importantly, the mutations do not affect antigen binding or Fc effector function. These mutations hold great promise for solving mAb reduction during manufacturing and preventing Fab-arm exchange in vivo.

Antibody disulfide bond reduction and recovery during biopharmaceutical process development-A review

Antibody disulfide bond reduction has been a challenging issue in monoclonal antibody manufacturing. It could lead to a decrease of product purity and failure to meet the targeted product profile and/or specifications. More importantly, disulfide bond reduction could also impact drug safety and efficacy. Scientists across the industry have been examining the root causes and developing mitigation strategies to address the challenge. In recent years, with the development of high titer mammalian cell culture processes to meet the rapidly growing demand for antibody biopharmaceuticals, disulfide bond reduction has been observed more frequently. Thus, it is necessary to continue evolving the disulfide reduction mitigation strategies and developing novel approaches to maintain high product quality. Additionally, in recent years as more complex molecules (such as bispecific and trispecific antibodies) emerge, the molecular heterogeneity due to incomplete formation of the interchain disulfide bonds becomes a more imperative challenging issue. Given the disulfide reduction challenges that biotech industry is facing, in this review, we provide a comprehensive scientific summary of the root cause analysis of disulfide reduction during process development of antibody therapeutics, mitigation strategies and its potential remediated recovery based on published papers. First, this paper intends to highlight different aspects of the root cause for disulfide reduction. Secondly, to provide a broader understanding of the disulfide bond reduction in downstream process, this paper discusses disulfide bond reduction impact on product stability, associated analytical methods for disulfide bond reduction detection and characterization, process control strategies as well as their manufacturing implementation. In addition, brief perspectives on the development of future mitigation strategies are also reviewed, including platform alignment, mitigation strategy application for the emerging new modalities such as bispecific and trispecific antibodies as well as using machine learning to identify molecule susceptibility of disulfide bond reduction. The data in this review are originated from the published papers.

Synthesis and Comparative In Vivo Evaluation of Site-Specifically Labeled Radioimmunoconjugates for DLL3-Targeted ImmunoPET

Delta-like ligand 3 (DLL3) is a therapeutic target for the treatment of small cell lung cancer, neuroendocrine prostate cancer, and isocitrate dehydrogenase mutant glioma. In the clinic, DLL3-targeted ⁸⁹Zr-immunoPET has the potential to aid in the assessment of disease burden and facilitate the selection of patients suitable for therapies that target the antigen. The overwhelming majority of ⁸⁹Zr-labeled radioimmunoconjugates are synthesized via the random conjugation of desferrioxamine (DFO) to lysine residues within the immunoglobulin. While this approach is admittedly facile, it can produce heterogeneous constructs with suboptimal in vitro and in vivo behavior. In an effort to circumvent these issues, we report the development and preclinical evaluation of site-specifically labeled radioimmunoconjugates for DLL3-targeted immunoPET. To this end, we modified a cysteine-engineered variant of the DLL3-targeting antibody SC16-MB1 with two thiol-reactive variants of DFO: one bearing a maleimide moiety (Mal-DFO) and the other containing a phenyloxadiazolyl methyl sulfone group (PODS-DFO). In an effort to obtain immunoconjugates with a DFO-to-antibody ratio (DAR) of 2, we explored both the reduction of the antibody with tris(2-carboxyethyl) phosphine (TCEP) as well as the use of a combination of glutathione and arginine as reducing and stabilizing agents, respectively. While exerting control over the DAR of the immunoconjugate proved cumbersome using TCEP, the use of glutathione and arginine enabled the selective reduction of the engineered cysteines and thus the formation of homogeneous immunoconjugates. A head-to-head comparison of the resulting ⁸⁹Zr-radioimmunoconjugates in mice bearing DLL3-expressing H82 xenografts revealed no significant differences in tumoral uptake and showed comparable radioactivity concentrations in most healthy nontarget organs. However, ⁸⁹Zr-DFO_PODS-^DAR2SC16-MB1 produced 30% lower uptake (3.3 ± 0.5 %ID/g) in the kidneys compared to ⁸⁹Zr-DFO_Mal-^DAR2SC16-MB1 (4.7 ± 0.5 %ID/g). In addition, H82-bearing mice injected with a ⁸⁹Zr-labeled isotype-control radioimmunoconjugate synthesized using PODS exhibited ∼40% lower radioactivity in the kidneys compared to mice administered its maleimide-based counterpart. Taken together, these results demonstrate the improved in vivo performance of the PODS-based radioimmunoconjugate and suggest that a stable, well-defined DAR2 radiopharmaceutical may be suitable for the clinical immunoPET of DLL3-expressing cancers.

Synthesis of Disulfide-Bridging Trehalose Polymers for Antibody and Fab Conjugation Using a Bis-Sulfone ATRP Initiator

Antibodies and antigen binding fragments (FABs) are widely used as therapeutics and conjugated polymers can enhance the properties of these important biomolecules. However, limitations to the selectivity and stability of current conjugation methodologies can inhibit the exploration of new antibody-polymer conjugates. Herein, we describe a new strategy for the synthesis of these conjugates that forms a stable thioether bond and can be directly incorporated into an atom transfer radical polymerization (ATRP) initiator. Specifically, a bis-sulfone alkyl bromide initiator was synthesized and utilized in the activators generated by electron transfer (AGET) ATRP of ethylene glycol methacrylate and trehalose methacrylate to form the respective polymers. The trehalose polymer was then irreversibly inserted into the disulfide bonds of Herceptin and Herceptin FAB after mild reduction to form the conjugates with quantitative conversions as verified by Western Blot and mass spectrometry after cleavage of the polymer. The binding of the Herceptin and Herceptin Fab conjugates to the receptor was investigated by indirect ELISA (enzyme-linked immunosorbent assay) and the EC50's were 0.90 and 2.74 nM, respectively, compared to Herceptin (0.26 nM) and the Fab (0.56 nM). The conjugates were subjected to heating studies at a constant 75 °C, the temperature determined in a heat ramp to be the threshold of stability for the antibody and FAB; the trehalose polymer was found to considerably increase the thermal stability of both Herceptin and Herceptin Fab. This work provides a new way to prepare polymer-antibody/Fab conjugates utilizing bis-sulfone end groups installed by atom transfer radical polymerization of the functionalized initiators and a way to stabilize these important molecules by conjugation to trehalose polymers.

In Vivo Reoxidation Kinetics of Free Thiols in Multiple Domains of IgG1 Antibodies in Rats

While free thiols in monoclonal antibodies (mAbs) have been extensively characterized by in vitro studies to probe its effect on antibody function and stability, their in vivo biotransformation has not been comprehensively studied. In this study, a panel of five recombinant IgG1 mAbs with elevated free thiols in the VH, VL, and CH2 domains were intravenously administered into Wistar rats. In vivo biotransformation of thirty-five free thiol sites in total (7 disulfide pairs in VL, CL, VH, CH1, HH, CH2, CH3 domains across the 5 mAbs) were monitored using a denaturing differential isotopic tagging procedure on immunopurified timepoints followed by LC-MS of tryptic digests. The free thiol levels in two VH domain and one CH2 domain disulfide sites decreased in vivo following first order kinetics. Free thiol levels of the remaining 32 sites were remarkably stable in vivo. Further analytical characterization highlighted a positive association between a free thiol's solvent accessibility and a free thiol's reoxidation propensity. The data and discussion presented here shed valuable insights into the in vivo fate of free thiols in several recombinant IgG1s and its implications for free thiols as a product quality attribute in therapeutic mAb products.

Comprehensive Analysis of Tryptic Peptides Arising from Disulfide Linkages in NISTmAb and Their Use for Developing a Mass Spectral Library

This work presents methods for identifying and then creating a mass spectral library for disulfide-linked peptides originating from the NISTmAb, a reference material of the humanized IgG1k monoclonal antibody (RM 8671). Analyses involved both partially reduced and non-reduced samples under neutral and weakly basic conditions followed by nanoflow liquid chromatography tandem mass spectrometry (LC–MS/MS). Spectra of peptides containing disulfide bonds are identified by both MS1 ion and MS2 fragment ion data in order to completely map all the disulfide linkages in the NISTmAb. This led to the detection of 383 distinct disulfide-linked peptide ions, arising from fully tryptic cleavage, missed cleavage, irregular cleavage, complex Met/Trp oxidation mixtures, and metal adducts. Fragmentation features of disulfide bonds under low-energy collision dissociation were examined. These include (1) peptide bond cleavage leaving disulfide bonds intact; (2) disulfide bond cleavage, often leading to extensive fragmentation; and (3) double cleavage products resulting from breakages of two peptide bonds or both peptide and disulfide bonds. Automated annotation of various complex MS/MS fragments enabled the identification of disulfide-linked peptides with high confidence. Peptides containing each of the nine native disulfide bonds were identified along with 86 additional disulfide linkages arising from disulfide bond shuffling. The presence of shuffled disulfides was nearly completely abrogated by refining digest conditions. A curated spectral library of 702 disulfide-linked peptide spectra was created from this analysis and is publicly available for free download. Since all IgG1 antibodies have the same constant regions, the resulting library can be used as a tool for facile identification of “hard-to-find” disulfide-bonded peptides. Moreover, we show that one may identify such peptides originating from IgG1 proteins in human serum, thereby serving as a means of monitoring the completeness of protein reduction in proteomics studies. Data are available via ProteomeXchange with identifier PXD023358.

An expanded genetic code facilitates antibody chemical conjugation involving the lambda light chain

Most of the currently approved therapeutic antibodies are of the immunoglobulin gamma (IgG) κ isotype, leaving a vast opportunity for the use of IgGλ in medical treatments. The incorporation of designer amino acids into antibodies enables efficient and precise manufacturing of antibody chemical conjugates. Useful conjugation sites have been explored in the constant domain of the human κ-light chain (LCκ), which is no more than 38% identical to its LCλ counterpart in amino acid sequence. In the present study, we used an expanded genetic code for site-specifically incorporating N^ε-(o-azidobenzyloxycarbonyl)-l-lysine (o-Az-Z-Lys) into the antigen-binding fragment (Fab) of an IgGλ, cixutumumab. Ten sites in the LCλ constant domain were found to support efficient chemical conjugation exploiting the bio-orthogonal azido chemistry. Most of the identified positions are located in regions that differ between the two light chain isotypes, thus being specific to the λ isotype. Finally, o-Az-Z-Lys was incorporated into the Fab fragments of cixutumumab and trastuzumab to chemically combine them; the resulting bispecific Fab-dimers showed a strong antagonistic activity against a cancer cell line. The present results expand the utility of the chemical conjugation method to the whole spectrum of humanized antibodies, including the λ isotype.

Site-selective modification strategies in antibody-drug conjugates

Antibody-drug conjugates (ADCs) harness the highly specific targeting capabilities of an antibody to deliver a cytotoxic payload to specific cell types. They have garnered widespread interest in drug discovery, particularly in oncology, as discrimination between healthy and malignant tissues or cells can be achieved. Nine ADCs have received approval from the US Food and Drug Administration and more than 80 others are currently undergoing clinical investigations for a range of solid tumours and haematological malignancies. Extensive research over the past decade has highlighted the critical nature of the linkage strategy adopted to attach the payload to the antibody. Whilst early generation ADCs were primarily synthesised as heterogeneous mixtures, these were found to have sub-optimal pharmacokinetics, stability, tolerability and/or efficacy. Efforts have now shifted towards generating homogeneous constructs with precise drug loading and predetermined, controlled sites of attachment. Homogeneous ADCs have repeatedly demonstrated superior overall pharmacological profiles compared to their heterogeneous counterparts. A wide range of methods have been developed in the pursuit of homogeneity, comprising chemical or enzymatic methods or a combination thereof to afford precise modification of specific amino acid or sugar residues. In this review, we discuss advances in chemical and enzymatic methods for site-specific antibody modification that result in the generation of homogeneous ADCs.

Washing with alkaline solutions in protein A purification improves physicochemical properties of monoclonal antibodies

Protein A affinity chromatography has been widely used for both laboratory scale purification and commercial manufacturing of monoclonal antibodies and Fc-fusion proteins. Protein A purification is specific and efficient. However, there still remain several issues to be addressed, such as incomplete clearance of impurities including host cell proteins, DNA, aggregates, etc. In addition, the effects of wash buffers in protein A purification on the physicochemical characteristics of antibodies have yet to be fully understood. Here we found a new purification protocol for monoclonal antibodies that can improve physicochemical properties of monoclonal antibodies simply by inserting an additional wash step with a basic buffer after the capture step to the conventional protein A purification. The effects of the alkaline wash on monoclonal antibodies were investigated in terms of physicochemical characteristics, yields, and impurity clearance. The simple insertion of an alkaline wash step resulted in protection of antibodies from irreversible aggregation, reduction in free thiols and impurities, an improvement in colloidal and storage stability, and enhanced yields. This new procedure is widely applicable to protein A affinity chromatography of monoclonal antibodies.

Causal link between immunoglobulin G glycosylation and cancer: A potential glycobiomarker for early tumor detection

Changes in immunoglobulin G (IgG) glycan structures are currently believed to closely related to the emergence of cancer. In this review, we summarize the current body of evidence suggesting that differences in serum IgG glycosylation patterns correspond to changes in multiple types of cancer. Modifications include IgG terminal N-link galactosylation, IgG core fucosylation, IgG terminal sialylation, and IgG terminal bisecting N-acetylglucosamine. IgG N-glycomic alterations represent promising novel biomarkers for non-invasive-cancer diagnosis, prognosis, and progression monitoring; they are characterized by high sensitivity and specificity, compensating for previously identified glycobiomarkers.

Impact of enzymatic reduction on bivalent bispecific antibody fragmentation and loss of product purity upon reoxidation

Antibody disulfide bond (DSB) reduction during manufacturing processes is a widely observed phenomenon attributed to host cell reductases present in harvest cell culture fluid. Enzyme-induced antibody reduction leads to product fragments and aggregates that increase the impurity burden on the purification process. The impact of reduction on bivalent bispecific antibodies (BisAbs), which are increasingly entering the clinic, has yet to be investigated. We focused on the reduction and reoxidation properties of a homologous library of bivalent BisAb formats that possess additional single-chain Fv (scFv) fragments with engineered DSBs. Despite all BisAbs having similar susceptibilities to enzymatic reduction, fragmentation pathways were dependent on the scFv-fusion site. Reduced molecules were allowed to reoxidize with and without low pH viral inactivation treatment. Both reoxidation studies demonstrated that multiple, complex BisAb species formed as a result of DSB mispairing. Furthermore, aggregate levels increased for all molecules when no low pH treatment was applied. Combined, our results show that complex DSB mispairing occurs during downstream processes while aggregate formation is dependent on sample treatment. These results are applicable to other novel monoclonal antibody-like formats containing engineered DSBs, thus highlighting the need to prevent reduction of novel protein therapeutics to avoid diminished product quality during manufacturing.

Assembly and Folding Properties of Cytosolic IgG Intrabodies

Intrabodies, antibodies expressed within cells, offer an interesting way to target intracellular molecules, making them potentially useful for biotechnology and medicine. However, it remains controversial whether full-size IgG intrabodies expressed in the reducing environment of the cytosol of mammalian cells are workable and structurally sound. Herein, we settle this issue with a systematic investigation of the structure and functionality of four chimeric IgG1s with distinct variable (V) domains but identical constant (C) domains. Full-size IgGs expressed in the cytosol of HEK293 cells were either assembly-competent or -incompetent, depending on the intrinsic properties of the V regions. Structural integrity of the C region is required for H:L association and the formation of a functional antigen-binding site. Partial intrachain disulfide bond formation occurs in both H and L chains of cytosolic IgG intrabodies, whereas interchain disulfide bond formation was absent and dispensable for functional assembly. IgG1s expressed in the cytosol and via the ER were shown to assemble differently. Our findings provide insight into the features and possible utilization of full-size IgGs as cytosolic antibodies in biotechnological and medical applications.

Functionalizing nanoparticles with cancer-targeting antibodies: A comparison of strategies

Standard cancer therapies sometimes fail to deliver chemotherapeutic drugs to tumor cells in a safe and effective manner. Nanotechnology takes the lead in providing new therapeutic options for cancer due to major potential for selective targeting and controlled drug release. Antibodies and antibody fragments are attracting much attention as a source of targeting ligands to bind specific receptors that are overexpressed on cancer cells. Therefore, researchers are devoting time and effort to develop targeting strategies based on nanoparticles functionalized with antibodies, which hold great promise to enhance therapeutic efficacy and circumvent severe side effects. Several methods have been described to immobilize antibodies on the surface of nanoparticles. However, selecting the most appropriate for each application is challenging but also imperative to preserve antigen binding ability and yield stable antibody-conjugated nanoparticles. From this perspective, we aim to provide considerable knowledge on the most widely used methods of functionalization that can be helpful for decision-making and design of conjugation protocols as well. This review summarizes adsorption, covalent conjugation (carbodiimide, maleimide and "click" chemistries) and biotin-avidin interaction, while discussing the advantages, limitations and relevant therapeutic approaches currently under investigation.

Signal amplification in flow cytometry for cell surface antigen analysis

Signal enhancing systems have been introduced to enable detection of cell surface antigens by flow cytometry. Cell surface antigens are important targets that describe the function and lineage of cells. Although flow cytometry is an effective tool for analysing cell surface antigens, this technique has poor sensitivity, which prohibits the detection of many important antigens on cell membranes. Thus, signal amplification is essential for developing practical tools for evaluating cell surface antigens by flow cytometry. Using a bright fluorophore or fluorescent polymer incorporated into antibodies is a straightforward strategy to improve flow cytometry sensitivity but may affect the functional characteristics of the labelled antibody. In contrast, enzymatic signal amplification is a more practical and efficient strategy to improve sensitivity that should not affect antibody activity. Although enzymatic signal amplification still has a number of drawbacks, this approach is a promising strategy to analyse cell surface antigens.

Antibody-Oligonucleotide Conjugates as Therapeutic, Imaging, and Detection Agents

Antibody-oligonucleotide conjugates (AOCs) are a novel class of synthetic chimeric biomolecules that has been continually gaining traction in different fields of modern biotechnology. This is mainly due to the unique combination of the properties of their two constituents, exceptional targeting abilities and antibody biodistribution profiles, in addition to an extensive scope of oligonucleotide functional and structural roles. Combining these two classes of biomolecules in one chimeric construct has therefore become an important milestone in the development of numerous biotechnological applications, including imaging (DNA-PAINT), detection (PLA, PEA), and therapeutics (targeted siRNA/antisense delivery). Numerous synthetic approaches have been developed to access AOCs ranging from stochastic chemical bioconjugation to site-specific conjugation with reactive handles, introduced into antibody sequences through protein engineering. This Review gives a general overview of the current status of AOC applications with a specific emphasis on the synthetic methods used for their preparation. The reported synthetic techniques are discussed in terms of their practical aspects and limitations. The importance of the development of novel methods for the facile generation of AOCs possessing a defined constitution is highlighted as a priority in AOC research to ensure the advance of their new applications.

Impact of linker-drug on ion exchange chromatography separation of antibody-drug conjugates

Charge variants are important attributes of monoclonal antibodies, including antibody-drug conjugates (ADCs), because charge variants can potentially influence the stability and biological activity of these molecules. Ion exchange chromatography (IEX) is widely used for charge variants analysis of mAbs and offers the feasibility of fractionation for in-depth characterization. However, the conjugated linker-drug on ADCs could potentially affect the separation performance of IEX, considering IEX separation relies on surface charge distribution of analyte and involves the interaction between analyte surface and IEX stationary phase. Here, we investigated weak cation exchange chromatography (WCX) for its application in analyzing three ADCs (two broad distribution ADCs and an ADC with controlled conjugation sites) and the 2-drug/4-drug loaded species isolated from the two broad distribution ADCs using hydrophobic interaction chromatography. The major peaks in WCX profile were characterized via fraction collection followed by capillary electrophoresis-sodium dodecyl sulfate or peptide mapping. Results suggested that both the number of drug loads and conjugation sites could impact WCX separation of an ADC. The hypothesis was that the linker drugs could interfere with the ionic interaction between its surrounding amino acids on the mAb surface and column resin, which reduced the retention of ADCs on WCX column in this study. Our results further revealed that WCX brings good selectivity towards positional isomers, but limited resolution for different drug load, which causes the peak compositions of the two broad-distribution ADCs to be highly complex. We also compared results from WCX and imaged capillary isoelectric focusing (icIEF). Results showed that separation in icIEF was less influenced by conjugated linker drugs for the ADCs studied in this work, and better alignment was found between the two techniques for the ADC with controlled conjugate sites. Overall, this work provides insights into the complexity of WCX analysis of ADCs, which should be considered during method development and sample characterization.

Antibody conjugation and formulation

In an era where ultra-high antibody concentrations, high viscosities, low volumes, auto-injectors and long storage requirements are already complex problems with the current unconjugated monoclonal antibodies on the market, the formulation demands for antibody-drug conjugates (ADCs) are significant. Antibodies have historically been administered at relatively low concentrations through intravenous (IV) infusion due to their large size and the inability to formulate for oral delivery. Due to the high demands associated with IV infusion and the development of novel antibody targets and unique antibody conjugates, more accessible routes of administration such as intramuscular and subcutaneous are being explored. This review will summarize various site-specific and non-site-specific antibody conjugation techniques in the context of ADCs and the demands of formulation for high concentration clinical implementation.

Linker-free antibody conjugation for sensitive hydrogel microparticle-based multiplex immunoassay

Graphically encoded hydrogel microparticles were directly conjugated with reduced antibodies without linkers for highly sensitive multiplex immunoassay.

Scalable Conjugation and Characterization of Immunoglobulins with Stable Mass Isotope Reporters for Single-Cell Mass Cytometry Analysis

The advent of mass cytometry (CyTOF®) has permitted simultaneous detection of more than 40 antibody parameters at the single-cell level, although a limited number of metal-labeled antibodies are commercially available. Here we present optimized and scalable protocols for conjugation of lanthanide as well as bismuth ions to immunoglobulin (Ig) using a maleimide-functionalized chelating polymer and for characterization of the conjugate. The maleimide functional group is reactive with cysteine sulfhydryl groups generated through partial reduction of the Ig Fc region. Incubation of Ig with polymer pre-loaded with lanthanide ions produces metal-labeled Ig without disrupting antigen specificity. Antibody recovery rates can be determined by UV spectrophotometry and frequently exceeds 60%. Each custom-conjugated antibody is validated using positive and negative cellular control populations and is titrated for optimal staining at concentrations ranging from 0.1 to 10 μg/mL. The preparation of metal-labeled antibodies can be completed in 4.5 h, and titration requires an additional 3-5 h.

Expression vector-derived heterogeneity in a therapeutic IgG4 monoclonal antibody

While characterizing a therapeutic IgG4 monoclonal antibody (mAb), we observed a variant with a mass 1177 Da larger than the predominant mAb form that could not be ascribed to previously described modifications. Through successive rounds of experimentation, we localized the mass addition to the C-terminus of the heavy chain (HC). During this process we observed that when the mAb was broken down into separate domains, the Fc and the 1177 Da-modified Fc could be chromatographically separated. Separation allowed collection of native and modified Fc fractions for LC/MS peptide mapping. A unique peptide present in the modified fraction was de novo sequenced and demonstrated to be a modified form of the HC C-terminus lacking two native residues (GK) and gaining twelve additional non-native residues (EAEAASASELFQ). Aware of other mAb variants with genetic origins, we sought to understand whether this modification too had a genetic basis. In silico translation of the expression vector encoding the mAb demonstrated that a normally non-coding section of nucleotides in the + 1 reading frame relative to the HC C-terminal coding region could have led to a transcript with the non-native C-terminal extension. Two potential mechanisms for how this nucleotide sequence might have fused to the native HC coding region and led to expression of the extension product are presented.

Simplified identification of disulfide, trisulfide, and thioether pairs with 213 nm UVPD

Disulfide heterogeneity and other non-native crosslinks introduced during therapeutic antibody production and storage could have considerable negative effects on clinical efficacy, but tracking these modifications remains challenging. Analysis must also be carried out cautiously to avoid introduction of disulfide scrambling or reduction, necessitating the use of low pH digestion with less specific proteases. Herein we demonstrate that 213 nm ultraviolet photodissociation streamlines disulfide elucidation through bond-selective dissociation of sulfur-sulfur and carbon-sulfur bonds in combination with less specific backbone dissociation. Importantly, both types of fragmentation can be initiated in a single MS/MS activation stage. In addition to disulfide mapping, it is also shown that thioethers and trisulfides can be identified by characteristic fragmentation patterns. The photochemistry resulting from 213 nm excitation facilitates a simplified, two-tiered data processing approach that allows observation of all native disulfide bonds, scrambled disulfide bonds, and non-native sulfur-based linkages in a pepsin digest of Rituximab. Native disulfides represented the majority of bonds according to ion count, but the highly solvent-exposed heavy/light interchain disulfides were found to be most prone to modification. Production and storage methods that facilitate non-native links are discussed. Due to the importance of heavy and light chain connectivity for antibody structure and function, this region likely requires particular attention in terms of its influence on maintaining structural fidelity.

Real-Time Binding Monitoring between Human Blood Proteins and Heavy Metal Ions in Nanoporous Anodic Alumina Photonic Crystals

This study reports on the real-time binding assessment between heavy metal ions and blood proteins immobilized onto nanoporous anodic alumina photonic crystals (NAA-PCs) by reflectometric interference spectroscopy (RIfS). The surface of NAA-PCs is chemically functionalized with γ-globulin (GG), transferrin (TFN), and serum albumin (HSA), the major proteins present in human blood plasma. Protein-modified NAA-PC platforms are exposed to analytical solutions of mercury ions of different concentrations. Dynamic changes in the effective optical thickness of protein-modified NAA-PCs in response to heavy metal ions are assessed in real time to evaluate the binding kinetics, affinity, and mechanism. Protein molecules undergo conformational changes upon exposure to mercury ions, with HSA exhibiting the strongest affinity. The combination of protein-modified NAA-PCs with RIfS allows real-time monitoring of protein-heavy metal ions interactions under dynamic flow conditions. This system is capable of detecting dynamic conformational changes in these proteins upon exposure to heavy metal ions. Our results provide new insights into these binding events, which could enable new methodologies to study the toxicity of heavy metal ions and other biomolecular interactions.