Room-Temperature Phosphorescence Chemosensor and Rayleigh Scattering Chemodosimeter Dual-Recognition Probe for 2,4,6-Trinitrotoluene Based on Manganese-Doped ZnS Quantum Dots

Room-temperature phosphorescence and fluorescence nanocomposites as a ratiometric chemosensor for high-contrast and selective detection of 2,4,6-trinitrotoluene

Reports on using complementary colours for high-contrast ratiometric assays are limited to date. In this work, graphitized carbon nitride (g-C3N4) nanosheets and mercaptoethylamine (MEA) capped Mn-doped ZnS QDs were fabricated by liquid exfoliation of bulk g-C3N4, and by a coprecipitation and postmodification strategies, respectively. Mn-doped ZnS quantum dots were deposited onto g-C3N4 nanosheets through an electrostatic self-assembly to form new nanocomposites (denoted as Mn-ZnS QDs@g-C3N4). Mn-ZnS QDs@g-C3N4 can emit a pair of complementary colour light, namely, orange room-temperature phosphorescence (RTP) at 582 nm and blue fluorescence at 450 nm. After 2,4,6-trinitrotoluene (TNT) dosing into Mn-ZnS QDs@g-C3N4 aqueous solution, and pairing with MEA to generate TNT anions capable of quenching the emission of Mn-doped ZnS QDs, the fluorescence colours of the solution changed from orange to blue across white, exhibiting unusual high-contrast fluorescence images. The developed ratiometric chemosensor showed very good linearity in the range of 0-12 μM TNT with a limit of detection of 0.56 μM and an RSD of 6.4 % (n = 5). Also, the ratiometric probe had an excellent selectivity for TNT over other nitroaromatic compounds, which was applied in the ratiometric test paper to image TNT in water, and TNT sensing under phosphorescence mode to efficiently avoid background interference. A high-contrast dual-emission platform for selective ratiometric detection of TNT was therefore established.

One-Pot Three Carbon Dots with Various Lifetimes Rooted in Different Decarboxylation Degrees for Matrix-Free, Anti-Oxygen, and Time-Resolved Information Encryption and Cellular Imaging

Activating long-lived room temperature phosphorescence (RTP) in the aqueous environment and thus realizing matrix-free, anti-oxygen, and time-resolved information encryption and cellular imaging remain a great challenge. Here, we fabricated three types of carbon dots (C-dots), i.e., fluorescent C-dots (F-C-dots) and two types of phosphorescent C-dots denoted as Pw-C-dots and Py-C-dots by a one-pot strategy. Their formation was attributed to the difference in the decarboxylation degree at high temperatures using trimesic acid (TMA) as a sole precursor. Unexpectedly, the yield reached as high as ∼92%, and the proportions were ∼27% for F-C-dots, ∼17% for Pw-C-dots, and ∼56% for Py-C-dots. These nanomaterials could help implement carbon peaking and carbon neutrality. Both green RTP of the two C-dots resulted from the small energy gap (ΔEST). These two RTP C-dots had a long lifetime of over 270 ms with a relatively high quantum yield (4.5 and 6.2%). They exhibited excellent photostability and anti-photobleaching performances. The dry and wet powders of the RTP C-dots were applied to high-level information encryption. The lifelike patterns were greatly different from those of the original ones and could last for several seconds to the naked eye, demonstrating that the RTP C-dots could be potentially employed as anti-oxygen and time-resolved contrast reagents. Most significantly, the cellular imaging experiments showed that the biofriendly PVP-coated Py-C-dots could localize at lysosomes and sustain hundreds of milliseconds. This approach not only pioneers a time-resolved lysosome localization model but also opens up a promising door for anti-oxygen and time-resolved RTP cytoimaging.

Lysosome-targetable brightly green fluorescence carbon dots for real-time monitoring in cell and highly efficient removal in environment of hypochlorite

Due to the lacks of lysosome localization group and reaction/interaction site for hypochlorite (ClO^-) on the surface of the carbon dots (C-dots), no C-dots-based lysosome-targeted fluorescence probes have, so far, been reported for real-time monitoring intracellular ClO^-. In this work, 1,3,6-trinitropyrene (TNP) was used as a precursor to prepare C-dots with maximum excitation and emission wavelengths at 485 and 532 nm, respectively, and quantum yield ∼ 27% by a hydrothermal approach at 196 °C for 6 h under a reductive atmosphere. The brightly green C-dots can sensitively and quickly respond to ClO^- in aqueous solution through surface chemical reaction, showing a linear relationship in the range of 0.5-120 μΜ ClO^- with 0.27 μΜ of limit of detection (LOD). Most significantly, the C-dots can localize at intracellular lysosome to image ClO^- in lysosomes. Also, the magnetic nanocomposites (C-dots@Fe₃O₄ MNCs) were fabricated via a simple electrostatic self-assembly between Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) and C-dots for highly efficient removal of ClO^- in real samples. Therefore, lysosome-targetable C-dots-based probes for real-time monitoring ClO^- were successfully constructed, opening up a promising door to investigate the biological functions and pathological roles of ClO^- at organelle levels.

Smartphone-Assisted Sensing of Trinitrotoluene by Optical Array

Here we report the design and fabrication of an array-based sensor, containing functionalized Carbon Dots, Bodipy's and Naphthalimide probes, that shows high fluorescence emissions and sensitivity in the presence of low amounts of TNT explosive. In particular, we have fabricated the first sensor device based on an optical array for the detection of TNT in real samples by using a smartphone as detector. The possibility to use a common smartphone as detector leads to a prototype that can be also used in a real-life field application. The key benefit lies in the possibility of even a nonspecialist operator in the field to simply collect and send data (photos) to the trained artificial intelligence server for rapid diagnosis but also directly to the bomb disposal unit for expert evaluation. This new array sensor contains seven different fluorescent probes that are able to interact via noncovalent interactions with TNT. The interaction of each probe with TNT has been tested in solution by fluorescence titrations. The solid device has been tested in terms of selectivity and linearity toward TNT concentration. Tests performed with other explosives and other nitrogen-based analytes demonstrate the high selectivity for TNT molecules, thus supporting the reliability of this sensor. In addition, TNT can be detected in the range of 98 ng∼985 μg, with a clear different response of each probe to the different amounts of TNT.

Purely Organic Microparticles Showing Ultralong Room Temperature Phosphorescence

Currently, organic phosphorescent particles are heavily used in sensing and imaging. Up to now, most of these particles contain poisonous and/or expensive metal complexes. Environmentally friendly systems are therefore highly desired. A purely amorphous system consisting of poly(methyl methacrylate) particles with incorporated N,N,N',N'-tetrakis(4-carboxyphenyl)benzidine emitter molecules is presented in this work. Single particles with sizes between 400 and 840 nm show-depending on the environment-bright fluorescence and phosphorescence. The latter is observed when oxygen is not in the proximity of the emitting dye molecules. These particles can scavenge singlet oxygen, which is produced during the photoexcitation process, by incorporating it into the polymer matrix. This renders their use to be unharmful for the surrounding matter with possible application in marking schemes for living bodies.

New application of Mn-doped ZnS quantum dots: phosphorescent sensor for the rapid screening of chloramphenicol and tetracycline residues

In this work, a new application of Mn-doped ZnS quantum dots (Mn-ZnS QDs) was developed to screen chloramphenicol (CAP) and tetracycline (TC) residues simply and rapidly. Mn-ZnS QDs synthesized by a hydration method and modified by l-cysteine for better stability emit phosphorescence at 583 nm with the excitation wavelength at 289 nm. Based on the overlap of the Mn-ZnS QDs excitation spectra and CAP or TCs ultraviolet spectra, the excited light of the Mn-ZnS QDs was partially absorbed by CAP or TCs owing to the inner-filter effect (IFE), leading to a decrease in the phosphorescence intensity. The phosphorescence intensities of the samples prepared by mixing different TCs and CAP were in good agreement with the expected results from adding a single antibiotic sample. Therefore, the total molar concentrations of CAP and TCs could be screened based on the linear equation of a single standard substance. Represented by tetracycline (TC), as a member of the tetracycline family, under optimized conditions, showed a good linear relational concentration range over 4 orders of magnitude from 50 to 1.5 × 105 nM with a limit of detection (LOD; S/N ratio = 3) down to 8.6 nM. The phosphorescent sensor was also used to detect total TCs in actual samples successfully. The evaluations of the recovery rate and selectivity were good. These results demonstrated that the presented phosphorescent sensor can be a simple and rapid screening platform for CAP and TCs.

Fabrication of amine functionalized CdSe@SiO2 nanoparticles as fluorescence nanosensor for highly selective and sensitive detection of picric acid

In this work, amino functionalized CdSe-silica core-shell nanoparticles (NH₂-CdSe@SiO₂ NPs) were constructed as probe to detect picric acid (PA). The CdSe QDs were embedded in SiO₂ nanoparticles and modified with amino groups on the surface. The nitro explosives are electron deficient in nature, which will have stronger affinity for amines and resulted in fluorescence quenching of quantum dots. It was proved that this strategy is selective, easy and sensitive enough for sensing PA with a detection limit of 0.5 × 10^-7 M.

High-performance liquid chromatography associated with resonance Rayleigh scattering spectral study of the interactions of palladium(ii)–antimigraine chelates with Erythrosin B and their analytical applications

For the first time, a highly sensitive and selective detection technology of high-performance liquid chromatography associated with resonance Rayleigh scattering spectra (HPLC-RRS) is applied to analyze migraine drugs including zolmitriptan (ZON) and rizatriptan (RIN).

Chemically modified mesoporous wood: a versatile sensor for visual colorimetric detection of trinitrotoluene in water, air, and soil by smartphone camera

There is great interest in detection of the level of 2,4,6-trinitrotoluene (TNT) explosive due to its importance in public security and environmental protection fields. The conventional chemical sensors do not simultaneously realize simple, rapid, sensitive, selective, and direct detection of TNT in different medium without sample pretreatment. Here we present a modified wood-based chemical sensor for visual colorimetric detection of TNT in water, air, and soil. The natural wood undergoes a delignified process, which is further functionalized by 3-aminopropyltriethoxysilane (APTES). When TNT solutions are introduced, the wood-based sensor shows a colorimetric transition from light yellow to brown for naked-eye readout because of the generation of Meisenheimer complex between APTES and TNT. The photographs are collected by smartphone camera, and the RGB components are extracted to calculate the adjusted intensity for qualitative detection of TNT. This visual colorimetric sensor for TNT solution displays a linearity in the range of 0.01-5 mM with a limit of detection of 3 μM. In addition, by taking advantage of its inherent mesostructure, the wood-based sensor can be employed for visual detection of TNT vapor as well. Furthermore, it is also able to directly detect TNT in wet soil samples based on capillary action, in which TNT carried by water transports upward along the wood microchannel, triggering the generation of Meisenheimer complex. Graphical Abstract.

A Novel Fluorescent Nanoparticle for Sensitive Detection of Cry1Ab Protein In Vitro and In Vivo

Here, we report the synthesis and characterization of CoFe₂O₄ doping Ag₂S dendrimer-modified nanoparticles (CoFe₂O₄-Ag₂S DMNs) in Cry1Ab protein detection and imaging. The near-infrared Ag₂S quantum dots were first prepared by using the thermal decomposition method, followed by modification of the water-soluble quantum dots using the method of solvent evaporation and ligand exchange, and finally the fluorescent magnetic bifunctional nanoparticles were obtained by binding with CoFe₂O₄. As-prepared CoFe₂O₄-Ag₂S DMNs were characterized by fluorescence (FL) spectroscopy and transmission electron microscopy (TEM). Results showed that Ag₂S DMNs could sensitively detect Cry1Ab both in vitro and in vivo. In vitro, the enhanced FL intensity as a function of the concentration is notably consistent with the Langmuir binding isotherm equation in the range of 0-200 ng/mL of Cry1Ab proteins. The detection limit of this method was found to be 0.2 ng/mL. Meanwhile, the fluorescence wavelength was extended to the second near-infrared range (NIR-II, 1.0~1.4 μm), which enables in vivo imaging. This study highlights the importance of NIR QDs doping magnetic materials as a new method to trace Bacillus thuringiensis (Bt) in insects and their potential applications in in vivo NIR tissue imaging.

A dual spectroscopic fluorescence probe based on carbon dots for detection of 2,4,6-trinitrophenol/Fe (III) ion by fluorescence and frequency doubling scattering spectra and its analytical applications

A convenient, highly sensitive and reliable assay for 2,4,6‑trinitrophenol (TNP) and Fe (III) ion (Fe³⁺) in the dual spectroscopic manner is developed based on novel carbon dots (CDs). The CDs with highly blue emitting fluorescent were easily prepared via the one-step potassium hydroxide-assisted reflux method from dextrin. The as-synthesized CDs exhibited the high crystalline quality, the excellent fluorescence characteristics with a high quantum yield of ~13.1%, and the narrow size distribution with an average diameter of 6.3±0.5nm. Fluorescence and frequency doubling scattering (FDS) spectra of CDs show the unique changes in the presence of TNP/Fe³⁺ by different mechanism. The fluorescence of CDs decreased apparently in the presence of TNP via electron-transfer. Thus, after the experimental conditions were optimized, the linear range for detection TNP is 0-50μM, the detection limit was 19.1nM. With the addition of Fe³⁺, the FDS of CDs appeared to be highly sensitive with a quick response to Fe³⁺ as a result of the change concentration of the scattering particle. The emission peak for FDS at 450nm was enhanced under the excitation wavelength at 900nm. The fluorescence response changes linearly with Fe³⁺ concentration in the range of 8-40μM, the detection limits were determined to be 44.1nM. The applications of CDs were extended for the detection of TNP, Fe³⁺ in real water samples with a high recovery. The results reported here may become the potential tools for the fast response of TNP and Fe³⁺ in the analysis of environmental pollutants.

Planar Is Better: Monodisperse Three-Layered MoS2 Quantum Dots as Fluorescent Reporters for 2,4,6-Trinitrotoluene Sensing in Environmental Water and Luggage Cases

In this study, we present a simple but effective fluorescent system for highly sensitive and versatile sensing of 2,4,6-trinitrotoluene (TNT) using few layered planar MoS₂ quantum dots (QDs) as reporters. Excitation-independent emitting MoS₂ QDs were first fabricated by using the proposed ultrasonic-hydrothermal-based top-down method assisted by carbon-free hydroxylamine hydrochloride. The obtained pristine MoS₂ QDs were then modified with cysteine for introducing amino groups as TNT binding sites. The as-prepared MoS₂ QDs possess a planar structure, which can more adequately interact with flat aromatic TNT molecules due to π-π attraction and decreased steric effects, compared with traditional spherical/quasi-spherical QDs. As a result, they exhibit extremely high sensitivity for TNT sensing (1 nM and 2 ng for solution and substrate assay, respectively). The common ions containing in environmental water samples do not interfere with the sensing. Furthermore, the QDs-decorated test paper shows an instantaneous (within 1 min) response to trace amounts of deposited TNT, and the fluorescence quenching can even be well-visualized by the naked eye. Because of favorable analytical performances, the proposed MoS₂ QDs-based TNT sensing system has potential applications in both environmental water monitoring and security screening.

Phosphorescence detection of manganese(VII) based on Mn-doped ZnS quantum dots

The phosphorescent l-cysteine modified manganese-doped zinc sulfide quantum dots (l-cys-MnZnS QDs) was developed for a highly sensitive detection of permanganate anions (MnO₄^-). l-cys-MnZnS QDs, which were easily synthesized in aqueous media using safe and low-cost materials, can emit intense phosphorescence even though the solution was not deoxygenated. However, the phosphorescence of l-cys-Mn-ZnS QDs was strongly quenched by MnO₄^- ascribed to the oxidation of l-cys and the increase of surface defects on l-cys-MnZnS QDs. Under the optimal conditions, l-cys-MnZnS QDs offer high selectivity over other anions for MnO₄^- determination, and good linear Stern-Volmer equation was obtained for MnO₄^- in the range of 0.5-100μM with a detection limit down to 0.24μM. The developed method was finally applied to the detection of MnO₄^- in water samples, and the spike-recoveries fell in the range of 95-106%.

Detection of phosphate based on phosphorescence of Mn doped ZnS quantum dots combined with cerium(iii)

A simple and rapid room-temperature phosphorescence (RTP) sensor for phosphate detection was developed on the basis of Ce³⁺ modulated mercaptopropionic acid (MPA)-capped Mn-doped ZnS quantum dots (QDs).

Ultrasensitive, Real-time and Discriminative Detection of Improvised Explosives by Chemiresistive Thin-film Sensory Array of Mn(2+) Tailored Hierarchical ZnS

A simple method combing Mn²⁺ doping with a hierarchical structure was developed for the improvement of thin-film sensors and efficient detection of the explosives relevant to improvised explosive devices (IEDs). ZnS hierarchical nanospheres (HNs) were prepared via a solution-based route and their sensing performances were manipulated by Mn²⁺ doping. The responses of the sensors based on ZnS HNs towards 8 explosives generally increase firstly and then decrease with the increase of the doped Mn²⁺ concentration, reaching the climate at 5% Mn²⁺. Furthermore, the sensory array based on ZnS HNs with different doping levels achieved the sensitive and discriminative detection of 6 analytes relevant to IEDs and 2 military explosives in less than 5 s at room temperature. Importantly, the superior sensing performances make ZnS HNs material interesting in the field of chemiresistive sensors, and this simple method could be a very promising strategy to put the sensors based on thin-films of one-dimensional (1D) nanostructures into practical IEDs detection.

Ratiometric fluorescence sensor arrays based on quantum dots for detection of proteins

Optical cross-reactive sensor arrays have recently been demonstrated as a powerful tool for high-throughput protein analysis.

Self-assembly of phosphorescent quantum dots/boronic-acid-substituted viologen nanohybrids based on photoinduced electron transfer for glucose detection in aqueous solution

We synthesized boronic-acid-substituted viologens (BBV) and designed a glucose sensor based on room-temperature phosphorescence (RTP) quantum dots (QDs) and BBV.

Glucose oxidase-directed, instant synthesis of Mn-doped ZnS quantum dots in neutral media with retained enzymatic activity: mechanistic study and biosensing application

Protein-directed synthesis of quantum dots (QDs) is a "greener" alternative to the current high-temperature and aqueous synthetic protocols, which provide water-soluble, biocompatible protein-functionalized QDs in one-pot. However, the protein activity in such synthetic schemes is a critical issue, since the synthetic conditions (for instance, high pH of the precursors, long time of synthesis, and disruption of disulfide bonds) are not suitable for retaining the activity (especially for enzymes). Herein, we present a facile and instant glucose oxidase (GOD)-directed strategy for the preparation of highly luminescent, phosphorescent Mn-doped ZnS (Mn-ZnS) QDs in one-step at room temperature and in neutral aqueous media. With such mild synthetic conditions, the enzymatic activity of GOD was totally retained. Furthermore, we also carried out GOD-directed synthesis of QDs with several other conditions that are reported in the literature. It turned out that the GOD enzymatic activity under these synthetic conditions was lower than that of the proposed protocol, indicating that mild synthetic conditions are the prerequisite for retaining the enzymatic activity. Importantly, the as-prepared GOD-mediated Mn-ZnS QDs exhibited high photostability, high salt tolerance and colloidal stability, and can be stored for months at 4 °C or 25 °C without changing their phosphorescent intensity and enzymatic activity. Via selective chemical modification, the exact functional groups (amino acid residues) of GOD in directing the synthesis of Mn-ZnS QDs were studied in detail. It turned out to be imidazole in histidine residues but not thiol in cysteine residues that directed the formation of Mn-ZnS QDs, and this was further confirmed with several other proteins for synthesis of Mn-ZnS QDs. The as-prepared GOD-capped Mn-ZnS QDs were employed as phosphorescent probes for background-free sensing of glucose in serum samples.

Rapid and Specific Aqueous-Phase Detection of Nitroaromatic Explosives with Inherent Porphyrin Recognition Sites in Metal-Organic Frameworks

Development of a rapid and effective method for the detection of 2,4,6-trinitrotoluene (TNT) in aqueous phase has attracted great attention. In this work, the fluorescent porphyrin-based metal-organic frameworks (MOFs) of PCN-224 were successfully exploited as a fluorescent probe for the rapid and selective TNT detection in water media. This strategy combined the advantages of fluorescent porphyrin molecules and porous MOFs, which not only overcame the aggregation of hydrophobic tetrakis(4-carboxyphenyl)porphyrin (TCPP) recognition sites but also promoted TNT to interact with recognition sites in virtue of the high surface and intrinsic open structure of MOFs. As a result, a rapid response time of as short as 30 s was obtained for the elaborated fluorescent probe. Meanwhile, the bright red emission of porphyrin units in PCN-224 could be proportionally quenched in correlation with the applied TNT level through the formation of TNT-TCPP complex in the ground state. The specificity of the employed sensory platform for TNT recognition was scarcely affected by other possible coexistent interfering species. Furthermore, this fluorescent PCN-224 probe presented a much higher quenching efficiency for TNT than other structurally similar nitroaromatic compounds and was successfully applied for the quantitative detection of TNT in the mixed nitroaromatic explosive samples. This prefigured their great potentials of practical TNT detection in water media for public safety and security.

Room-temperature phosphorescence by Mn-doped ZnS quantum dots hybrid with Fenton system for the selective detection of Fe2+

Fe²⁺ was selectively detected based on the phosphorescence quenching of MPA–Mn : ZnS QDs caused by hydroxyl radicals from the Fenton reaction.

Mn-doped ZnS quantum dots with a 3-mercaptopropionic acid assembly as a ratiometric fluorescence probe for the determination of curcumin

Mn-doped ZnS quantum dots capped with 3-mercaptopropionic acid (MPA) were synthesized by a facile method in aqueous solution as a ratiometric fluorescent (I_{590 nm}/I_{458 nm}) probe for curcumin.

Application of BSA-bioconjugated phosphorescence nanohybrids in protein detection in biofluids

In this study, a cross-linking agent 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) was used to link QDs and bovine serum albumin (BSA) to form a nanohybrid BSA–Mn-ZnS Room-Temperature Phosphorescence (RTP) biosensor.

The mechanism of 2,4,6-trinitrotoluene detection with amino acid-capped quantum dots: a density functional theory study

Both a Meisenheimer complex and deprotonated TNT are formed when TNT meets amino acid-capped quantum dots.

A novel strategy for the aqueous synthesis of down-/up-conversion nanocomposites for dual-modal cell imaging and drug delivery

A highly efficient multifunctional nanoplatform for dual-modal luminescence imaging and pH-responsive drug delivery has been developed on the basis of a facile and novel strategy by covalently binding up-conversion (UC) luminescent NaYF₄:Yb,Er nanoparticles with down-conversion (DC) fluorescent AgInS₂-ZnS quantum dots. Due to the enriched carboxylic groups in the polymer shell of UC nanoparticles, the as-prepared nanocomposites (NCs) are water-soluble, functionalizable and able to load anti-cancer drug molecules, doxorubicin (DOX), by simple physical adsorption. The release of DOX from NCs was controlled by varying the pH, with an increased drug dissociation rate in an acidic environment, favorable for controlled drug release. Moreover, the endocytosis and the efficient drug release properties of the system were confirmed by luminescence microscopy. Hence, this approach provides a valuable method for fabricating a NC system with highly integrated functionalities for dual-modal luminescence cell imaging and targeted cancer therapy.

Molybdenum disulfide quantum dots as a photoluminescence sensing platform for 2,4,6-trinitrophenol detection

Transition metal chalcogenides, especially molybdenum disulfide (MoS2), have recently attracted wide attention from researchers as graphene-analogous materials. However, until now, little literature has reported the synthesis of photoluminescent MoS2 materials and their applications in analytical chemistry. We herein presented a facile bottom-up hydrothermal route for the synthesis of photoluminescent MoS2 quantum dots (QDs) by using sodium molybdate and cysteine as precursors. The prepared MoS2 QDs were characterized by transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, photoluminescence spectroscopy, and UV-vis spectroscopy. The MoS2 QDs were then used as photoluminescent probes to construct a photoluminescence (PL) quenching sensor for detection of 2,4,6-trinitrophenol (TNP). The TNP sensor presented a wide linear range from 0.099 to 36.5 μM with a high detection limit of 95 nM. Furthermore, the sensor displayed a high sensitivity toward TNP over other structurally similar compounds like 2,4,6-trinitrotoluene, p-chlorophenol, phenol, and 2,6-di-tert-butyl-4-methylphenol. To understand the origin of the high sensitivity, we assessed the emission wavelength-dependent PL quenching behavior of MoS2 QDs by the above five compounds using Stem-Volmer equation in detail. The results showed that the novel approach we put forward can satisfactorily explain the interaction mechanisms between MoS2 QDs and the five compounds, and the high sensitivity for TNP very likely originated from a combination of the PL resonance energy transfer, electronic energy transfer, and electrostatic interactions between MoS2 QDs and TNP. Finally, the sensor was successfully applied for detection of TNP in water samples and test papers.

Kinetic fluorescence quenching of CdS quantum dots in the presence of Cu(II): chemometrics-assisted resolving of the kinetic data and quantitative analysis of Cu(II)

In this work, the kinetic fluorescence behavior of CdS quantum dots (QDs) in the presence of Cu(II) was investigated. In contrast to some other transition metal ions such as Ag(I), Ni(II), and Hg(II), a gradual red-shift in the emission spectrum of CdS QDs was observed for Cu(II) during the reaction course. More investigations revealed the existence of two chemical components in the recorded kinetic data in the presence of Cu(II). Multivariate curve resolution-alternating least squares (MCR-ALS) method was applied in order to extract pure emission spectra and time-dependent profiles of these two components at different concentrations of Cu(II). The results obtained from resolving the data by MCR-ALS got some information about the mechanism of the interaction between CdS QDs and Cu(II) ions which were in good agreement with those reported in the literature. Moreover, the multivariate method of analysis, partial least-squares (PLS) method, was used to develop a multivariate calibration model for quantitative analysis of Cu(II) using the entire kinetic data sets. The calibration and validation sets were created ranging from 0.02 to 1μM of Cu(II) and were successfully calibrated and predicted by the PLS model. This method allowed a sensitive determination of Cu(II) ions with a detection limit of 13nM based on three times of the standard deviation corresponding to PLS regression.