Preparation of perphenylcarbamoylated β-cyclodextrin-silica hybrid monolithic column with "one-pot" approach for enantioseparation by capillary liquid chromatography

Enantioseparation by zeolitic imidazolate framework-8-silica hybrid monolithic column with sulfobutylether-β-cyclodextrin as a chiral additive in capillary electrochromatography

A zeolitic imidazolate framework (ZIF)-8-silica hybrid monolithic column was prepared by one-step sol-gel method. The stationary phase in the monolithic column was characterized by Fourier-transform infrared spectra, X-ray diffraction, thermogravimetric analysis, nitrogen adsorption/desorption, and zeta potential. The results showed that ZIF-8-silica hybrid monolithic materials had abundant functional groups, good crystallinity, large specific surface area, and good thermal stability. A capillary electrochromatography (CEC) chiral separation system was for the first time constructed with ZIF-8-silica hybrid monolithic column and sulfobutylether-β-cyclodextrin (SBE-β-CD) as a chiral additive and was applied to separate the selected single and mixed chiral compounds (13 natural amino acids and 5 chiral pesticides). Under the optimized CEC conditions, all the single analytes achieved baseline separation with resolution of 2.14-5.94 and selectivity factor of 1.06-1.49 in less than 6 min, and the mixed amino acids with similar properties were also simultaneously enantioseparated (Rs ≥ 1.82). Relative standard deviations (RSDs) of migration time and column efficiency were lower than 4.26% and did not change significantly after 200 runs, evidencing excellent reproducibility and stability. These results demonstrate that the application of SBE-β-CD as a chiral additive for ZIF-8-silica hybrid monolithic columns is a promising method for the separation of chiral compounds.

Unique On-Site Spinning Sampling of Highly Water-Soluble Organics Using Functionalized Monolithic Sorbents

Water utilities encounter unpredictable odor issues that cannot be explained by routine water parameters during spring runoff, even in the summer and fall. Highly water-soluble organics (e.g., amino acids and saccharides) have been reported to form odorous disinfection byproducts during disinfection, but the lack of simple and practical on-site sampling techniques hampers their routine monitoring at trace levels in source water. Therefore, we have created two functionalized nested-in-sponge silica monoliths (NiS-SMs) using a one-pot synthesis method and demonstrated their application for extracting highly soluble organics in water. The NiS-SMs functionalized with the sulfonic group and phenylboronic moiety selectively extracted amino acids and monosaccharides, respectively. We further developed a spinning sampling technique using the composites and evaluated its robust performance under varying water conditions. The spinning sampling coupled to high-performance liquid chromatography tandem mass spectrometry analysis provided limits of detection for amino acids at 0.038-0.092 ng L^-1 and monosaccharides at 0.036-0.14 ng L^-1. Using the pre-equilibrium sampling-rate calibration, we demonstrated the applicability of the spinning sampling technique for on-site sampling and monitoring of amino acids and monosaccharides in river water. The new composite materials and rapid on-site sampling technique are unique and efficient tools for monitoring highly soluble organics in water sources.

Design, synthesis, and characterization of a series of novel β-cyclodextrin functional monomers

In order to increase its solubility in water and improve β-cyclodextrin combination with guest molecules, chemical modification of β-cyclodextrin is a feasible and effective method. A variety of β-cyclodextrin derivatives are designed and introduced for pharmaceutical complexation and analytical chemistry application. In this study, a series of β-cyclodextrin derivatives containing unsaturated bonds is designed and synthesized. The products are characterized by MS, FTIR, 1H NMR, and 13C NMR. Some of the functional monomers may be used in the preparation of molecularly imprinted polymers, and preliminary studies have shown excellent molecular recognition ability. The prepared β-cyclodextrin functional monomers have potential application value in molecular recognition materials based on polymers.

A Polymer-based Monolithic Capillary Column with Polymyxin-B Chiral Selector for the Enantioselective Nano-High Performance Liquid Chromatographic Pharmaceutical Analysis

Herein, we report the first use of Polymyxin-B antibiotic as a enantio-selector in polymer monolithic capillary. The capillaries were functionalised, characterized and tested for the enantioselective nano-HPLC separation of 50 racemic pharmaceutical drugs. They have been easily prepared by immobilizing Polymyxin-B over the organic polymer for 48 h (P1) or encapsulating Polymyxin-B within the organic polymer (P2) and tested for the enantioselective resolution of racemic drugs. Acceptable resolution was achieved for 21 drugs using RP-HPLC conditions on both (P1) and (P2) capillary columns, while no separation was observed under NP-HPLC conditions. Polymyxin-B is commercially available, easily solubilized and stable in both acidic and neutral media. The developed Polymyxin-B-based polymer monolithic capillaries provide a promising expansion of platform in enantioselective HPLC separations.

Host-guest interactions for extracting antibiotics with a γ-cyclodextrin poly(glycidyl-co-ethylene dimethacrylate) hybrid sorbent

A procedure for the solid-phase extraction of antibiotics (enoxacin, ofloxacin, norfloxacin, ciprofloxacin, and sparfloxacin) in water has been developed. The sorbent used is based on a poly(glycidyl-co-ethylene dimethacrylate) network, whose previously modified surface has been functionalized with γ-cyclodextrin through a click-chemistry reaction. The architecture of the material has been characterized by thermogravimetric analysis, N₂ adsorption-desorption, Raman spectroscopy, confocal microscopy, and scanning electron microscopy, showing good capability to be used as a filler for extraction cartridges. The optimization of the extraction methodology shows good intra-day and inter-day repeatability of the extraction procedure, with coefficients of variation between 2.5 and 5.1% and the possibility of reusing the material at least five times. The detection limits of the method have been established at the μg L^-1 level, confirming the possibility of quantifying trace levels. To end, real groundwater samples have been analyzed and the results are comparable with those obtained with a reference method. The proposed material can be used for assessing the presence of antibiotics in aqueous environments through an extraction procedure taking advantage of the presence of γ-cyclodextrin on its structure.

S-citalopram imprinted monolithic columns for capillary electrochromatography enantioseparations

In this study, the molecular imprinting method was used to separate enantiomeric forms of chiral antidepressant drug, R,S-citalopram (R,S-CIT) in aqueous solution by CEC system combining the advantages of capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC). For that, an amino acid-based molecularly imprinted monolithic capillary column was designed and used as a stationary phase for selective separation of S-citalopram (S-CIT) for the first time. S-CIT was selectively separated from the aqueous solution containing the other enantiomeric form of R-CIT, which is the same in size and shape as the template molecule. Morphology of the molecularly imprinted (MIP S-CIT) and non-imprinted (NIP S-CIT) monolithic capillary columns was observed by scanning electron microscopy. Imprinting efficiency of MIP S-CIT monolithic capillary column used for selective S-CIT separation was verified by comparing with NIP S-CIT and calculated imprinting factor (I.F:1.81) proved the high selectivity of the MIP S-CIT for S-CIT. Cavities formed for S-CIT form enabled selective (α = 2.08) separation of the target molecule from the other enantiomeric R-CIT form. Separation was achieved in a short period of 10 min, with the electrophoretic mobility of 7.68 × 10^-6 m² /Vs for R,S-CIT at pH 7.0 10 mM PB and 50% ACN ratio. The performance of both MIP S-CIT and NIP S-CIT columns was estimated by repeating the R,S-CIT separations with intra-batch and inter-batch studies for reproducibility of retention times of R,S-CITs. Estimated RSD values that are lower than 2% suggest that the monolithic columns separate R,S-CIT enantiomers without losing separation efficiency.

Daptomycin: A Novel Macrocyclic Antibiotic as a Chiral Selector in an Organic Polymer Monolithic Capillary for the Enantioselective Analysis of a Set of Pharmaceuticals

Daptomycin, a macrocyclic antibiotic, is here used as a new chiral selector in preparation of chiral stationary phase (CSP) in a recently prepared polymer monolithic capillary. The latter is prepared using the copolymerization of the monomers glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) in the presence of daptomycin in water. Under reversed phase conditions (RP), the prepared capillaries were tested for the enantioselective nanoliquid chromatographic separation of fifty of the racemic drugs of different pharmacological groups, such as adrenergic blockers, H1-blockers, NSAIDs, antifungal drugs, and others. Baseline separation was attained for many drugs under RP-HPLC. Daptomycin expands the horizon of chiral selectors in HPLC.

Rapid preparation and characterization of a bridged bis(β-cyclodextrin) functionalized urea–formaldehyde monolithic column by a “one-pot” approach

A new bridged-CD monolith was prepared by “one-pot” method within 30 minutes. The obtained bridged-CD monolith showed satisfactory enantioselectivity compared to a native-CD monolith.

History, advancement, bottlenecks, and future of chiral capillary electrochromatography

Capillary electrochromatography (CEC) represents a technique with less than 30 years of intense development and in this period this technique has seen huge promise, fast development, stagnation, and significant decline of innovative activity. The major goal of the present overview is not to present an extensive review of the literature on chiral CEC but to analyze the reasons for this dramatic development and attempting to answer questions such as: 1) Was the potential of CEC reasonably evaluated in 1990s before starting the explosive development in this field? 2) Did the development of this technique take the right track? 3) What other developments and competitive trends led to stagnation in the advancement of CEC? 4) Why is the activity in this field currently decreasing? 5) What are the current challenges and promises and what is the future of chiral CEC?

Hydroxypropyl-β-cyclodextrin encapsulated stationary phase based on silica monolith particles for enantioseparation in liquid chromatography

Hydroxypropyl-β-cyclodextrin-encapsulated stationary phase incorporated on silica monolith particles was prepared by physical embedding, providing a new method for the development of chiral stationary phase for enantioseparation in liquid chromatography. Ground silica monolith particles of about 2.0 μm were prepared via sol-gel reaction followed by differential sedimentation. Initially, the silica monolith particles were pretreated with 3-trimethoxysilyl propyl methacrylate to attach double-bonded ligands onto the surface, then a network structure was formed onto the surface of the particle using N-isopropyl acrylamide as functional monomer. Hydroxypropyl-β-cyclodextrin was encapsulated inside N-isopropyl acrylamide copolymerized layer on the surface of silica monolith particles. The effect of the amount of chiral selector on the chromatographic efficiency of the chiral stationary phase was examined. The glass lined stainless steel columns (1 mm internal diameter, 300 mm length) were packed with the stationary phase for estimation of the efficiency by separation of phenylsuccinic acid, oxybutynin, equol, and naproxen enantiomers in high-performance liquid chromatography, with the resolutions of 1.54, 1.72, 2.54, and 2.31, respectively. The column to column repeatabilities through relative standard deviation were found better than 3%. The experimental results indicate that the sol-gel ground silica particles modified with β-cyclodextrin provide a promising way for the separation of chiral enantiomers.

Highly efficient preparation of β-CD-based chiral monolithic column by "one-pot" hydroxymethyl polycondensation for enantioseparation in capillary liquid chromatography

A facile strategy for highly efficient fabrication of chiral monolithic column was carried out by the simple "one-pot" hydroxymethyl polycondensation of native β-cyclodextrin (β-CD) and urea-formaldehyde (UF). In-situ rapid substitution of native β-CD and efficient polycondensation of β-CD products and UF oligomers was proposed and fulfilled in one pot. The feasibility, mechanism and key parameters of polycondensation reaction were discussed. The data on crosslinking polycondensation and reaction kinetics were further evaluated. Characteristics including the morphologies, permeability and structure stability of the resultant monolithic columns were also studied. Under the optimal conditions, the "one-pot" hydroxymethyl polycondensation was accomplished in an aqueous solution within only 10 mins. Satisfactory stability and repeatability were gained, and good enantioseparation of eight model enantiomers was successfully achieved with the resultant β-CD-based monolith. It was simple and highly efficient, and the organic solvents, special CD derivatives and tediously long-time polymerization reaction were successfully avoided, which might light a new access to rapid preparation of CD-chiral monolith for high-performance enantioseparation.

Synthesis of a poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolith via an in-situ ring opening quaternization for use in hydrophilic interaction capillary liquid chromatography

An in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) [poly(sulfobetaine-co-POSS)] that can be used in a hybrid monolithic column as a hydrophilic liquid chromatography (HILIC) stationary phase. Synthesis involves (a) radical polymerization of octa(propyl methacrylate)-polyhedral oligomeric silsesquioxane (MA-POSS) and organic monomers such as dimethylaminopropyl methacrylate or vinyl imidazole, and (b) in-situ ring-opening quaternization between 1,4-butane sultone and the organic monomers. The sulfobetaine groups are generated in-situ monolith. This obviates the need for synthesis of sulfobetaine monomer previously. The pore size and permeability of the material can be tuned by using a binary porogenic system (polyethyleneglycol 600 and acetonitrile) and via the composition of the polymerization mixture. The optimized hybrid monolith owns its merits to the presence of POSS and sulfobetaine groups with good mechanical stability, the lack of residual silanol groups, and adequate hydrophilicity. The column filled with the monoliths was evaluated as a stationary phase for HILIC. Several kinds of polar compounds (including nucleosides, bases, phenols, aromatic acids and amides) were separated by using mobile phases with high organic solvent fractions in capillary liquid chromatography. Graphical abstractAn in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolithic column for use in hydrophilic liquid chromatography. The optimized monolith owns good mechanical stability, the lack of residual silanol groups and adequate hydrophilicity. Baseline separation of several kinds of polar compounds is achieved on the column. MA-POSS: octa(propyl-methacrylate) polyhedral oligomeric silsesquioxane; DMAEMA: dimethylaminoethyl methacrylate; AIBN: azodiisobutyronitrile. Poly(DMABS-co-POSS): poly(N-(4-sulfobutyl)-N-methacryloxypropyl- N,N-dimethylammonium-betaine-co-polyhedral oligomeric silsesquioxane).

Two-dimensional material membranes for critical separations

In this review, we summarize the separation mechanisms and materials adopted for the fabrication of 2D material membranes as well as their applications in critical separations.

A poly(glycidyl-co-ethylene dimethacrylate) nanohybrid modified with β-cyclodextrin as a sorbent for solid-phase extraction of phenolic compounds

A hybrid material made of β-cyclodextrin anchored to a polymeric network is described and evaluated as a sorbent for solid-phase extraction of phenolic compounds (phenol, cresol isomers, 2-methoxy-4-vinylphenol, 4-ethylphenol, 4-vinylphenol, 4-ethylguaiacol, guaiacol, and eugenol). The polymeric backbone of the sorbent consists of a poly(glycidyl-co-ethylene dimethacrylate) network, whose surface has been modified with β-cyclodextrin by a click-chemistry based procedure. The resulting material has been characterized by different techniques, and it has shown to be viable as a sorbent for its use in extraction cartridges. In this way, a method for the determination of the above analytes in tea has been validated. Under optimum conditions, the method has good repeatability, with coefficients of variation between 0.6 and 7.2%. In addition, recoveries from spiked samples at the level of 50 μg L^-1 are between 57 and 101%. The method has been then applied to the determination of phenolic compounds in the drinkable portion of infusions made from tea bags. The quantification has been carried out by using gas chromatography coupled to a mass spectrometry detector. Following their elution from the sorbent with a mixture of acetonitrile and methanol, the limits of quantification reached are between 4.6 and 400 μg L^-1. Results have been compared with those obtained with a reference method by using the paired t-test for comparing individual differences. The solid phase is reusable, and no cyclodextrin is lost during extraction due to its covalent anchoring to the polymeric support. Graphical abstract Schematic representation of the structure and characterization of the hybrid material made of β-cyclodextrin anchored to a polymeric network. The material is described and evaluated as a sorbent for the solid-phase extraction of phenolic compounds.

Recent Trends in Fast Liquid Chromatography for Pharmaceutical Analysis

Background:

Liquid chromatography is the workhorse of analytical laboratories of pharmaceutical companies for analysis of bulk drug materials, intermediates, drug products, impurities and degradation products. This efficient technique is impeded by its long and tedious analysis procedures. Continuous efforts of scientists to reduce the analysis time resulted in the development of three different approaches namely, HTLC, chromatography using monolithic columns and UHPLC.

Methods:

Modern column technology and advances in chromatographic stationary phase including silica-based monolithic columns and reduction in particle and column size (UHPLC) have not only revolutionized the separation power of chromatographic analysis but also have remarkably reduced the analysis time. Automated ultra high-performance chromatographic systems equipped with state-ofthe- art software and detection systems have now spawned a new field of analysis, termed as Fast Liquid Chromatography (FLC). The chromatographic approaches that can be included in FLC are hightemperature liquid chromatography, chromatography using monolithic column, and ultrahigh performance liquid chromatography.

Results:

This review summarizes the progress of FLC in pharmaceutical analysis during the period from year 2008 to 2017 focusing on detecting pharmaceutical drugs in various matrices, characterizing active compounds of natural products, and drug metabolites. High temperature, change in the mobile phase, use of monolithic columns, new non-porous, semi-porous and fully porous reduced particle size of/less than 3μm packed columns technology with high-pressure pumps have been extensively studied and successively applied to real samples. These factors revolutionized the fast high-performance separations.

Conclusion:

Taking into account the recent development in fast liquid chromatography approaches, future trends can be clearly predicated. UHPLC must be the most popular approach followed by the use of monolithic columns. Use of high temperatures during analysis is not a feasible approach especially for pharmaceutical analysis due to thermosensitive nature of analytes.

Colistin Sulfate Chiral Stationary Phase for the Enantioselective Separation of Pharmaceuticals Using Organic Polymer Monolithic Capillary Chromatography

A new functionalized polymer monolithic capillary with a macrocyclic antibiotic, namely colistin sulfate, as chiral selector was prepared via the copolymerization of binary monomer mixtures consisting of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) in porogenic solvents namely 1-propanol and 1,4-butanediol, in the presence of azobisiso-butyronitrile (AIBN) as initiator and colistin sulfate. The prepared capillaries were investigated for the enantioselective nano-LC separation of a group of racemic pharmaceuticals, namely, α- and β-blockers, anti-inflammatory drugs, antifungal drugs, norepinephrine-dopamine reuptake inhibitors, catecholamines, sedative hypnotics, antihistaminics, anticancer drugs, and antiarrhythmic drugs. Acceptable separation was achieved for many drugs using reversed phase chromatographic conditions with no separation achieved under normal phase conditions. Colistin sulfate appears to be useful addition to the available macrocyclic antibiotic chiral phases used in liquid chromatography.

Wide pH range enantioseparation of cyclodextrin silica-based hybrid spheres for high performance liquid chromatography

pH plays an important role in the enantiomeric separation process by changing the polarity of the mobile phase and the conformation and ionization state of the enantiomers. Herein, β-cyclodextrin-silica hybrid spheres with n-propyl groups as hydrophobic linkers and ethyl-silica as a support were prepared using a one-pot approach, and then the hydroxyl group was further modified with 3,5-dimethylphenyl isocyanate. The new β-cyclodextrin-silica hybrid chiral stationary phase (CD-HCSP) was prepared and characterized using techniques including scanning electron microscopy and transmission electron microscopy. The enantioseparation properties of CD-HCSP were evaluated with different solvents over a wide pH range (1-10) in reversed phase. 14 enantiomers were successfully resolved, and favorable chiral resolution and high stability was demonstrated for multiple types of enantiomer under different pH conditions. Compared with commercial columns, CD-HCSP showed better chiral resolution and, more importantly, could be used for chiral resolution over a wide pH range. This work combines the high pH tolerance of the hybrid material and excellent chiral recognition of cyclodextrin for enantioseparation of chiral drugs, which could lead to the development of a new type of chiral separation material.

Fast preparation of hybrid monolithic columns via photo-initiated thiol-yne polymerization for capillary liquid chromatography

Although several approaches have been developed to fabricate hybrid monoliths, it would still take a few hours to finish the formation of monoliths. Herein, photo-initiated thiol-yne polymerization was first adopted to in situ fabricate hybrid monoliths within the confines of UV-transparent fused-silica capillary. A silicon-containing diyne (1,3-diethynyltetramethyl-disiloxane, DYDS) was copolymerized with three multithiols, 1,6-hexanedithiol, trimethylolpropane tris(3-mercaptopropionate) and pentaerythriol tetrakis(3-mercaptopropionate), by using a binary porogenic system of diethylene glycol diethyl ether (DEGDE)/poly(ethylene glycol) (PEG200) within 10 min. Several characterizations of three hybrid monoliths (assigned as I, II and III, respectively) were performed. The results showed that these hybrid monoliths possessed bicontinuous porous structure, which was remarkably different from that via typical free-radical polymerization. The highest column efficiency of 76,000 plates per meter for butylbenzene was obtained on the column I in reversed-phase liquid chromatography (RPLC). It was observed that the efficiencies for strong-retained butylbenzene were almost close to those of weak-retained benzene, indicating a retention-independent efficient performance of small molecules on hybrid column I. The surface area of this hybrid monolith was very small in the dry state (less than 10.0 m²/g), and the chromatographic behavior of hybrid monolithic columns would be possibly explained by radical-mediated step-growth process of thiol-yne polymerization. Finally, the column I was applied for separation of BSA tryptic digest by cLC-MS/MS, indicating satisfactory separation ability for complicated samples.

High performance affinity chromatography and related separation methods for the analysis of biological and pharmaceutical agents

The last few decades have witnessed the development of many high-performance separation methods that use biologically related binding agents. The combination of HPLC with these binding agents results in a technique known as high performance affinity chromatography (HPAC). This review will discuss the general principles of HPAC and related techniques, with an emphasis on their use for the analysis of biological compounds and pharmaceutical agents. Various types of binding agents for these methods will be considered, including antibodies, immunoglobulin-binding proteins, aptamers, enzymes, lectins, transport proteins, lipids, and carbohydrates. Formats that will be discussed for these methods range from the direct detection of an analyte to indirect detection based on chromatographic immunoassays, as well as schemes based on analyte extraction or depletion, post-column detection, and multi-column systems. The use of biological agents in HPLC for chiral separations will also be considered, along with the use of HPAC as a tool to screen or study biological interactions. Various examples will be presented to illustrate these approaches and their applications in fields such as biochemistry, clinical chemistry, and pharmaceutical research.

Biofunctionalized mesoporous silica nanospheres for the ultrasensitive chemiluminescence immunoassay of tumor markers

Mesoporous silica nanospheres (SiO₂) are synthesized and biofunctionalized for the development of an ultrasensitive chemiluminescent (CL) immunosensor for tumor markers.

Preparation of a long-alkyl-chain-based hybrid monolithic column with mixed-mode interactions using a "one-pot" process for pressurized capillary electrochromatography

A simple "one-pot" approach for the preparation of a new vinyl-functionalized organic-inorganic hybrid monolithic column is described. In this improved method, the hydrolyzed alkoxysilanes of tetramethoxysilane and triethoxyvinylsilane were used as precursors for the synthesis of a silica-based monolith, while 1-hexadecene and sodium ethylenesulfonate were used as vinyl functional monomers along with azobisisobutyronitrile as an initiator. The effects of reaction temperature, urea content, and composition of organic monomers on the column properties (e.g. morphology, mechanical stability, and chromatographic performance) were investigated. The monolithic column was used for the separation of neutral solutes by reversed-phase pressurized capillary. Furthermore, the monolith can separate various aromatic amines, which indicated its excellent cation-exchange capability and hydrophobic interactions. The baseline separation of the aromatic amines was obtained with a column efficiency of up to 78 000 plates/m.

Functionalized polymer monoliths with carbamylated amylose for the enantioselective reversed phase nano-liquid chromatographic separation of a set of racemic pharmaceuticals

Here we report the first encapsulation of three carbamylated amylose namely R-, S- and R/S-amylose 2,3(3,5-dimethylphenylcarbamate)-6-ethylphenylcarbamate in organic polymer monolith in situ capillary columns. The columns were investigated for the enantioselective nano-liquid chromatographic separation of a set of racemic pharmaceuticals, namely, α- and β-blockers, anti-inflammatory drugs, antifungal drugs, norepinephrine-dopamine reuptake inhibitors, catecholamines, sedative hypnotics, antihistaminics, anticancer drugs, and antiarrhythmic drugs. Baseline separation was achieved for several drugs under reversed phase chromatographic conditions and only few drugs were separated under normal phase conditions. The developed columns provide more economical analysis under environmentally benign conditions.

One-Pot Approach to Prepare Organo-silica Hybrid Capillary Monolithic Column with Intact Mesoporous Silica Nanoparticle as Building Block

A facile "one-pot" approach to prepare organo-silica hybrid capillary monolithic column with intact mesoporous silica nanoparticle (IMSN) as crosslinker and building block was described. An IMSN crosslinked octadecyl-silica hybrid capillary monolithic column (IMSN-C18 monolithic column) was successfully prepared, and the effects of fabrication conditions (e.g. concentration of intact mesoporous silica nanoparticle, polycondensation temperature, content of vinyltrimethoxysilane and stearyl methacrylate) on the structures of the IMSN-C18 monolithic column were studied in detail. The IMSN-C18 hybrid monolithic column possessed uniform morphology, good mechanical and pH stability (pH 1.1-11), which was applied to the separations of alkyl benzenes, polycyclic aromatic hydrocarbons (PAHs), as well as proteins. The minimum plate height of 10.5 μm (corresponding to 95000 N m^-1) for butylbenzene and high reproducibility were achieved. The analysis of tryptic digest of bovine serum albumin (BSA) was carried out on the IMSN-C18 monolithic column by cLC coupled mass spectrometry (cLC-MS/MS), with the protein sequence coverage of 87.5% for BSA, demonstrating its potential application in proteomics.