Pre-Equilibrium Solid-Phase Microextraction of Free Analyte in Complex Samples: Correction for Mass Transfer Variation from Protein Binding and Matrix Tortuosity

Sample preparation techniques for protein binding measurement in radiopharmaceutical approaches: A short review

Plasma protein binding (PPB) measurement is a key step in radiopharmaceutical studies for the development of positron emission tomography (PET) radioligands. PPB refers to the binding degree of a radioligand, radiotracer, or drug to blood plasma proteins or tissues after administration into the body. Several techniques have been successfully developed and applied for PPB measurement of PET radioligands. However, there is room for progress among these techniques in relation to duration time, adaptability with nonpolar radioligands, in vivo measurement, specificity, and selectivity. This mini review gives a brief overview of advances, limitations, and prospective applications of commercially-available PPB methods.

Development of a novel solid phase microextraction calibration method for semi-solid tissue sampling

Accurate quantitative analysis using in vivo solid phase microextraction (SPME) for semi-solid tissue can be challenging due to the complexity of the sample matrix. In this paper, a comprehensive study was carried out on the extraction kinetics of SPME in the semi-solid sample, and subsequently proposed a new theoretical model to interpret the kinetic extraction process. Theoretically derived mathematical expressions well described the experimental desorption time profiles of the SPME process. Modelling experiments were also carried out to study the effect of sample tortuosity and binding matrix on the parameters affecting the extraction kinetics. Seven polyaromatic hydrocarbons (PAHs) and eight polychlorinated biphenyls (PCBs) in agarose gel and in real fish tissue were used for these experiments. The experimental data showed excellent agreement with theoretical prediction while providing excellent interpretation of the effect of tortuosity and binding matrix. Based on the theoretical model, an on-fiber standard calibration method with fewer internal standards was developed. The newly developed calibration method was used to quantify PAHs and PCBs in agarose gel and fish tissue. By using the proposed calibration method, a large number of organic compounds can be quantified with fewer internal standards. Current study provides the theoretical foundation for in vivo SPME quantitative semi-solid tissue analysis in the future.

Effect of dissolved organic matter on pre-equilibrium passive sampling: A predictive QSAR modeling study

Pre-equilibrium passive sampling is a simple and promising technique for studying sampling kinetics, which is crucial to determine the distribution, transfer and fate of hydrophobic organic compounds (HOCs) in environmental water and organisms. Environmental water samples contain complex matrices that complicate the traditional calibration process for obtaining the accurate rate constants. This study proposed a QSAR model to predict the sampling rate constants of HOCs (polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides) in aqueous systems containing complex matrices. A homemade flow-through system was established to simulate an actual aqueous environment containing dissolved organic matter (DOM) i.e. humic acid (HA) and (2-Hydroxypropyl)-β-cyclodextrin (β-HPCD)), and to obtain the experimental rate constants. Then, a quantitative structure-activity relationship (QSAR) model using Genetic Algorithm-Multiple Linear Regression (GA-MLR) was found to correlate the experimental rate constants to the system state including physicochemical parameters of the HOCs and DOM which were calculated and selected as descriptors by Density Functional Theory (DFT) and Chem 3D. The experimental results showed that the rate constants significantly increased as the concentration of DOM increased, and the enhancement factors of 70-fold and 34-fold were observed for the HOCs in HA and β-HPCD, respectively. The established QSAR model was validated as credible (R_Adj.²=0.862) and predictable (Q²=0.835) in estimating the rate constants of HOCs for complex aqueous sampling, and a probable mechanism was developed by comparison to the reported theoretical study.

MAIN FINDING OF THE WORK

The present study established a QSAR model of passive sampling rate constants and calibrated the effect of DOM on the sampling kinetics.

Determination of four salicylic acids in aloe by in vivo solid phase microextraction coupling with liquid chromatography-photodiode array detection

In recent years, great concerns have been raised about salicylic acid (SA) and its derivatives as plant regulators. Therefore, precise determination of the distribution of SAs in the living plants is necessary for not only fundamental researches but also the regulating mechanisms. In this study, a custom-made solid phase microextraction (SPME) fiber based on diallyl dimethyl ammonium chloride-assembled graphene oxide-coated C18 composite (C18@GO@PDDA) was proposed for in vivo detection of salicylic acid, acetylsalicylic acid (ASA), 4-methyl salicylic acid（4-SA）and 3-methyl salicylic acid (3-SA) in aloe plants. Under the optimized conditions, the analytical performance evaluated in homogenized aloe plant tissues exhibited low detection limits (1.8-2.8 μg g^-1), wide linear ranges (10-5000 μg g^-1), and satisfactory reproducibility (relative standard deviations less than 8.4% and 9.3% for inter-fiber and intra-fiber assays, respectively). Under cadmium stress, the developed method was applied for the in vivo tracing of four salicylic acids in aloe plants. A 48-h in vivo tracing revealed that salicylic acids were involved in the pathway of cadmium stress tolerance. To our best knowledge, it is the first effort to realize the in vivo analysis of SA and its derivatives in plants, and it has a made a great step forward in the area of plant hormone analysis.

Novel Electrosorption-Enhanced Solid-Phase Microextraction Device for Ultrafast In Vivo Sampling of Ionized Pharmaceuticals in Fish

Decreasing the tedious sample preparation duration is one of the most important concerns for the environmental analytical chemistry especially for in vivo experiments. However, due to the slow mass diffusion paths for most of the conventional methods, ultrafast in vivo sampling remains challenging. Herein, for the first time, we report an ultrafast in vivo solid-phase microextraction (SPME) device based on electrosorption enhancement and a novel custom-made CNT@PPY@pNE fiber for in vivo sampling of ionized acidic pharmaceuticals in fish. This sampling device exhibited an excellent robustness, reproducibility, matrix effect-resistant capacity, and quantitative ability. Importantly, the extraction kinetics of the targeted ionized pharmaceuticals were significantly accelerated using the device, which significantly improved the sensitivity of the SPME in vivo sampling method (limits of detection ranged from 0.12 ng·g^-1 to 0.25 ng·g^-1) and shorten the sampling time (only 1 min). The proposed approach was successfully applied to monitor the concentrations of ionized pharmaceuticals in living fish, which demonstrated that the device and fiber were suitable for ultrafast in vivo sampling and continuous monitoring. In addition, the bioconcentration factor (BCF) values of the pharmaceuticals were derived in tilapia (Oreochromis mossambicus) for the first time, based on the data of ultrafast in vivo sampling. Therefore, we developed and validated an effective and ultrafast SPME sampling device for in vivo sampling of ionized analytes in living organisms and this state-of-the-art method provides an alternative technique for future in vivo studies.

A flow-through aqueous standard generation system for thin film microextraction investigations of UV filters and biocides partitioning to different environmental compartments

In this paper problems associated with preparation of aqueous standard of highly hydrophobic compounds such as partial precipitation, being lost on the surfaces, low solubility in water and limited sample volume for accurate determination of their distribution coefficients are addressed. The following work presents two approaches that utilize blade thin film microextraction (TFME) to investigate partitioning of UV filters and biocides to humic acid (dissolved organic carbon) and sediment. A steady-state concentration of target analytes in water was generated using a flow-through aqueous standard generation (ASG) system. Dialysis membranes, a polytetrafluoroethylene permeation tube, and a frit porous (0.5 μm) coated by epoxy glue were basic elements used for preparation of the ASG system. In the currently presented study, negligible depletion TFME using hydrophilic-lipophilic balance (HLB) and octadecyl silica-based (C18) sorbents was employed towards the attainment of free concentration values of target analytes in the studied matrices. Thin film geometry provided a large volume of extraction phase, which improved the sensitivity of the method towards highly matrix-bound analytes. Extractions were performed in the equilibrium regime so as to prevent matrix effects and with aims to reach maximum method sensitivity for all analytes under study. Partitioning of analytes on dissolved organic carbon (DOC) was investigated in ASG to facilitate large sample volume conditions. Binding percentages and DOC distribution coefficients (Log K_DOC) ranged from 20 to 98% and 3.71-6.72, respectively. Furthermore, sediment-water partition coefficients (K_d), organic-carbon normalized partition coefficients (Log K_OC), and DOC distribution coefficients (Log K_DOC) were investigated in slurry sediment, and ranged from 33 to 2860, 3.31-5.24 and 4.52-5.75 Lkg^-1, respectively. The obtained results demonstrated that investigations utilizing ASG and TFME can yield reliable binding information for compounds with high log K_OW values. This information is useful for study of fate, transport, and ecotoxicological effects of UV filters and biocides in aquatic environment.

Comparing polyethylene and polyoxymethylene passive samplers for measuring sediment porewater concentrations of polychlorinated biphenyls: Mutual validation and possible correction by polymer-polymer partition experiment

Two sediment passive samplers, polyethylene (PE) and polyoxymethylene (POM), were compared and mutually validated for measuring freely dissolved concentrations (C_free) of polychlorinated biphenyls (PCBs) in sediment porewater. PE and POM strips in commonly used dimensions (30 and 76 μm in thickness, respectively) were exposed to sediment slurries for 28 d. The C_free values calculated using literature polymer-water partition coefficients were consistently higher for PE than for POM by a factor of 2 on average. Time series experiments over 96 d show that 28 d are sufficient for attaining partition equilibrium of PCBs for PE, whereas even 96 d may not be enough for POM. To gain additional insight, POM and PE strips were co-exposed to bovine serum albumin suspension spiked with PCBs. The POM/PE concentration ratios increased over 56 d, and the ratios at 28 d were in agreement with the POM-to-PE ratios of PCB concentrations from the 28-d sediment slurry experiments. This agreement suggests that the use of apparent POM-water partition coefficients (i.e., non-equilibrium concentration ratios) suitable for a 28-d exposure to sediment slurries may correct the non-attainment of equilibrium and could provide more accurate C_free values.

Predicting Partitioning and Diffusion Properties of Nonpolar Chemicals in Biotic Media and Passive Sampler Phases by GC × GC

The chemical parameters needed to explain and predict bioavailability, biodynamics, and baseline toxicity are not readily available for most nonpolar chemicals detected in the environment. Here, we demonstrate that comprehensive two-dimensional gas chromatography (GC × GC) retention times can be used to predict 26 relevant properties for nonpolar chemicals, specifically: partition coefficients for diverse biotic media and passive sampler phases; aquatic baseline toxicity; and relevant diffusion coefficients. The considered biotic and passive sampler phases include membrane and storage lipids, serum and muscle proteins, carbohydrates, algae, mussels, polydimethylsiloxane, polyethylene, polyoxymethylene, polyacrylate, polyurethane, and semipermeable membrane devices. GC × GC-based chemical property predictions are validated with a compilation of 1038 experimental property data collected from the literature. As an example application, we overlay a map of baseline toxicity to fathead minnows onto the separated analyte signal of a polychlorinated alkanes (chlorinated paraffins) technical mixture that contains 7820 congeners. In a second application, GC × GC-estimated properties are used to parametrize multiphase partitioning models for mammalian tissues and organs. In a third example, we estimate chemical depuration kinetics for mussels. Finally, we illustrate an approach to screen the GC × GC chromatogram for nonpolar chemicals of potentially high concern, defined based on their GC × GC-estimated biopartitioning properties, diffusion properties, and baseline toxicity.

Solid-phase microextraction (SPME) with stable isotope calibration for measuring bioavailability of hydrophobic organic contaminants

Solid-phase microextraction (SPME) is a biomimetic tool ideally suited for measuring bioavailability of hydrophobic organic compounds (HOCs) in sediment and soil matrices. However, conventional SPME sampling requires the attainment of equilibrium between the fiber and sample matrix, which may take weeks or months, greatly limiting its applicability. In this study, we explored the preloading of polydimethylsiloxane fiber with stable isotope labeled analogs (SI-SPME) to circumvent the need for long sampling time, and evaluated the performance of SI-SPME against the conventional equilibrium SPME (Eq-SPME) using a range of sediments and conditions. Desorption of stable isotope-labeled analogs and absorption of PCB-52, PCB-153, bifenthrin and cis-permethrin were isotropic, validating the assumption for SI-SPME. Highly reproducible preloading was achieved using acetone-water (1:4, v/v) as the carrier. Compared to Eq-SPME that required weeks or even months, the fiber concentrations (Cf) under equilibrium could be reliably estimated by SI-SPME in 1 day under agitated conditions or 20 days under static conditions in spiked sediments. The Cf values predicted by SI-SPME were statistically identical to those determined by Eq-SPME. The SI-SPME method was further applied successfully to field sediments contaminated with PCB 52, PCB 153, and bifenthrin. The increasing availability of stable isotope labeled standards and mass spectrometry nowadays makes SI-SPME highly feasible, allowing the use of SPME under nonequilibrium conditions with much shorter or flexible sampling time.

In-vivo passive sampling to measure elimination kinetics in bioaccumulation tests

The application of in-tissue passive sampling to quantify chemical kinetics in fish bioconcentration experiments was investigated. A passive sampler consisting of an acupuncture needle covered with a PDMS tube was developed together with a method for its deployment in rainbow trout. The time to steady state for chemical uptake into the passive sampler was >1d, so it was employed as a kinetically limited sampler with a deployment time of 2 h. The passive sampler was employed in parallel with the established whole tissue extraction method to study the elimination kinetics of 10 diverse chemicals in rainbow trout. 4-n-nonylphenol and 2,4,6-tri-tert-butylphenol were close to or below the limit of quantification in the sampler. For chlorpyrifos, musk xylene, hexachlorobenzene, 2,5-dichlorobiphenyl and p,p'-DDT, the elimination rate constants determined with the passive sampler method and the established method agreed within 18%. Poorer agreement (35%) was observed for 2,3,4-trichloroanisole and p-diisopropylbenzene because fewer data were obtained with the passive sampling method due to its lower sensitivity. The work shows that in-tissue passive sampling can be employed to measure contaminant elimination kinetics in fish. This opens up the possibility of studying contaminant kinetics in individual fish, thereby reducing the fish requirements and analytical costs for the determination of bioconcentration factors.

Solid-phase microextraction coupled to LC-ESI-MS/MS: evaluation and correction for matrix-induced ionization suppression/enhancement for pharmaceutical analysis in biological and environmental samples

Solid-phase microextraction (SPME) coupled to liquid chromatography with electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) has been widely used to analyze biological fluids, tissues, and environmental matrixes for a variety of organic compounds including pharmaceuticals. However, effects of the sample matrix coextracted by SPME on tandem mass spectrometry analysis have not been systematically investigated. In this study, we characterized the complexity of matrix effects (ME) by analyzing SPME extracts of fish muscle and brain tissue, blood, and bile, as well as tap water, surface water, and the influent and effluent from a wastewater treatment plant. Significant enhancement or suppression of ionization (>15%) was observed with all biological and environmental samples. Intrasample ME variability was assessed through comparison of multiple samples from the same sample matrix, while intersample variability between different experimental subjects or varying sample treatment, storage, and sampling conditions were evaluated. To correct for ME, an isotopic internal standard (IIS) method was developed, with the strengths and limitations of the approach discussed. This study provides a framework for applying SPME within complex sample systems where the influences of ME are inevitable, thus ensuring more accurate quantitation of analytes during biological and environmental analysis.