Butterfly-Shaped Conjugated Oligoelectrolyte/Graphene Oxide Integrated Assay for Light-Up Visual Detection of Heparin

Vanadate-based Fe-MOFs as promising negative electrode for hybrid supercapacitor device

In the supercapacitor field, negative electrodes are mainly concentrated in carbon-based materials, such as activated carbon, carbon nanotubes, graphene, and so forth. However, materials based on metal-organic frameworks (MOFs) as negative active components are relatively rare. Herein, a series of composite materials based on graphene oxide (GO) and vanadate-based Fe-organic frameworks have been prepared by hydrothermal method namely GO/Fe-VO4-BIPY. The deposition amount of polyoxometalate-based metal-organic frameworks (POMOFs) on the surface of graphene is adjusted by changing the content of POMOFs. Through the deposition, it can effectively reduce the accumulation between graphene, and increase the dispersion of POMOFs. As a result, the charge storage performance of the as-obtained materials is greatly improved. Among these materials, GO/Fe-VO4-BIPY-1 has the most prominent performance, with a specific capacitance of 190 F g-1at 0.5 A g-1, which is attributed to the excellent synergistic effect between the Faraday chemical reaction and electric double-layer capacitance. In comparison with pristine Fe-VO4-BIPY, GO/Fe-VO4-BIPY-1 delivers more excellent surface area and therefore exhibits abundant redox reaction sites, achieving better electrochemical performance the best. After assembly with the positive Ni(OH)2electrode, the maximum energy density of 46.84 W h kg-1at a power density of 850 W kg-1is achieved.

Aggregation-induced emission enhancement of gold nanoclusters triggered by sodium heparin and its application in the detection of sodium heparin and alkaline amino acids

This work first reported that sodium heparin could cause the aggregation-induced emission enhancement (AIEE) effect of GSH-AuNCs (Glutathione functionalized gold nanoclusters). While it was interestingly found that the addition of alkaline amino acids would greatly weaken this effect. Thus, fluorescent system was designed for the quantitative detection of sodium heparin and alkaline amino acids. Negatively charged sodium heparin would connect with GSH-AuNCs through electrostatic attraction, leading to a significant AIEE effect. Then alkaline amino acids would competitively bind with sodium heparin, causing this effect to almost disappear. The reasons were as follows: (I) The hydrogen bonding between sodium heparin and alkaline amino acids was much stronger than electrostatic force, causing GSH-AuNCs to be competitively replaced. (II) Alkaline amino acids and GSH-AuNCs were both positively charged and repelled each other. The presence of alkaline amino acids would hinder the AIEE effect. (III) AIEE effect was confirmed to have a close relationship with the pH value which could be greatly affected by alkaline amino acids. (Ⅳ) Not only the hydrogen bonding, the electrostatic force also existed between the alkaline amino acids and sodium heparin. All the above reasons worked together to weaken the AIEE effect of GSH-AuNCs triggered by sodium heparin. Finally, both sodium heparin and alkaline amino acids were accurately detected, showing good correlation coefficients of 0.99 with the LODs of 0.0100 mg/mL (sodium heparin), 1.05 μM (histidine), 3.38 μM (arginine) and 6.16 μM (lysine), respectively.

A Label-Free and Ultrasensitive Prussian Blue-Based Dipstick Sensor for Bacterial and Biofilm Detection

Water and food contamination has become the major contributor to infections and deaths. However, rapid and sensitive bacterial detection still remains an unmet demand that has attracted widespread attention. Often water and food samples are sent out for laboratory testing to detect the presence of contamination, which is time-consuming and laborious. Herein, we have developed a highly sensitive, tenable, affordable, and robust (STAR) paper-based colorimetric dipstick sensor based on the principle of Prussian blue (PB) synthesis as an indicator of bacterial contamination. In the presence of bacteria, it leads to the formation of PB, a dye that acts as a colorimetric indicator. The intensity of the PB is the direct measure of the degree of contamination. The fabrication of the STAR dipstick sensor involves a simple and cost-effective process. The STAR dipstick sensor is ultrasensitive and can detect up to 101 CFU/mL of bacteria within minutes of contact with the test sample. The STAR dipstick sensor is fabricated using biodegradable components, which is speculated to facilitate quick and environmentally friendly degradation after each use. The sensor has been validated for its properties and capabilities at different pH to detect both Gram-positive and Gram-negative bacterial strains in real-time samples. The stability and degradation were also monitored. Comprehensively, the proposed STAR dipstick sensor can serve as a point-of-care device to detect bacterial contamination in a swift and sensitive manner.

Application of Graphene Oxide-Based Hydrogels in Bone Tissue Engineering

As an important derivative of graphene-based materials, graphene oxide (GO) not only plays an important role not only in optoelectronics and sensing but also in biology due to its unique mechanical, electronic, and optical properties. This article reviews the application of GO-based hydrogels in bone tissue engineering. Whether it is a hydrogel synthesized with natural polymer compounds, synthetic polymer chemicals, bioceramics, bioactive factors, or other materials, the addition of GO can significantly improve various properties of the hydrogel. We also introduce some high-performance GO-based hydrogels in this paper, proposing some insights into materials that may be applied to bone tissue engineering in the future.

Nanozyme catalysis-assisted ratiometric multicolor sensing of heparin based on target-specific electrostatic-induced aggregation

Monitoring the level of heparin in clinical matrices is significant because of its pivotal role in preventing thrombosis. Compared to traditional single-signal sensors, multi-signal ratiometric detection can provide anti-interference results especially in complicated environments. However, fabricating an easy-to-operation, low-cost and robust sensor for the ratiometric detection of heparin still remains challenging. Here we propose a novel nanosensor for the ratiometric multicolor sensing of heparin with high performance. The sensor is based on the specific electrostatic interaction between the target and a positively charged species generated from nanozyme catalysis. FeMoO₄ nanorods are explored as an oxidase mimic for the first time, showing a high activity at neutral pH to catalyze the colorless 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to blue TMBox with an absorbance at 652 nm. Heparin can induce the rapid aggregation of the produced TMBox intermediate with rich positive charges due to their strong electrostatic interaction, leading to the formation of a purple Heparin-TMBox complex providing a signal at 565 nm. With the increase of heparin, the color changes from blue to indigo and further purple, enabling the multicolor sensing of the target. As a result, ultrasensitive determination of heparin was obtained with a very low detection limit. The fabricated nanosensor could differentiate heparin from complex species with no interferences, and it provided reliable analytical results for heparin in both serum and plasma. With robust performance, low cost and facile fabrication, the sensor holds great potential in monitoring heparin for clinical applications.

Heparin detection based on the fluorescent turn-on probe of amino carbon quantum dots

Amino-rich carbon quantum dots (CDs) were synthesized by hydrothermal treatment of ethylene glycol, glucose and polyethyleneimine. CDs have green fluorescence (excitation/emission peaks 435 nm/515 nm) and can be enhanced by the addition of heparin (Hep). A linear relationship between fluorescence intensity and heparin concentration was observed. The fluorescence turn-on probe used for Hep detection showed a very large detection range of 0.02-16 μM, covering different therapeutic ranges in clinical applications. The probe exhibited an ultra-low detection limit of 0.007 nM.

Copper nanocluster composites for analytical (bio)-sensing and imaging: a review

As an ideal substitute for traditional organic fluorescent dyes or up-conversion nanomaterials, copper nanoclusters (CuNCs) have developed rapidly and have been involved in exciting achievements in versatile applications. The emergence of novel CuNCs composites improves the poor stability and fluorescence intensity of CuNCs. With this in mind, great efforts have been made to develop a wide variety of CuNCs composites, and impressive progress has been made in the past few years. In this review, we systematically summarize absorption, fluorescence, electrochemiluminescence, and catalytic properties and focus on the multiple factors that affect the fluorescence properties of CuNCs. The fluorescence properties of CuNCs are discussed from the point of view of core size, surface ligands, self-assembly, metal defects, pH, solvent, ions, metal doping, and confinement effect. Especially, we illustrate the research progress and representative applications of CuNCs composites in bio-related fields, which have received considerable interests in the past years. Additionally, the sensing mechanism of CuNCs composites is highlighted. Finally, we summarize current challenges and look forward to the future development of CuNCs composites. Schematic diagram of the categories, possible sensing mechanisms, and bio-related applications of copper nanoclusters composites.

Graphene Oxide-Based Simple and Rapid Detection of Antibiotic Resistance Gene via Quantum Dot-Labeled Zinc Finger Proteins

With the increasing rise of antibiotic-resistant pathogens, a simple and rapid detection of antibiotic resistance gene (ARG) is crucial to mitigate the spreading of antibiotic resistance. DNA-binding zinc finger proteins (ZFPs) can be engineered to recognize specific double-stranded (ds) DNA sequences in ARG. Here, we designed a simple and rapid method to detect ARG in bacteria utilizing engineered ZFPs and 2D nanosheet graphene oxide (GO) as a sensing platform. Our approach relies on the on and off effect of fluorescence signal in the presence and absence of target ARG, respectively. By taking advantage of the unique quenching capability of GO due to its electronic property, quantum dot (QD)-labeled ZFPs are adsorbed onto the GO sheets, and their fluorescence signal is quenched by proximal GO sheets through fluorescence resonance energy transfer (FRET). In the presence of target DNA, ZFP binding to the target DNA induces dissociation from GO, thereby restoring the fluorescence signal. Our system detects target DNA through restoration of QD emission as the restored signal increases directly with target DNA concentrations. Engineered ZFPs were able to detect specific dsDNA of the tetracycline resistance gene tetM with high specificity after only 10 min incubation on our GO-based sensing system. Our sensing system employed one-step FRET-based ZFP and GO combined technology to enable rapid and quantitative detection of ARG, providing a limit of detection as low as 1 nM. This study demonstrated the application of GO in conjunction with engineered DNA-binding domains for the direct detection of dsDNA with great potential as a rapid and reliable screening and detecton method against the growing threat of antibiotic resistant bacteria.

A colorimetric and fluorometric based dual readout approach for effective heparin sensing

Devising fluorescence-based turn-on probes for the specific and sensitive detection of Heparin is of utmost clinical importance. In this contribution, we have identified a molecular rotor based asymmetric cyanine probe, thiazole orange (TO), which enables an efficient colorimetric and fluorimetric detection of Heparin. TO undergoes the formation of emissive H-aggregates upon interaction with Heparin that display an impressive emission enhancement of ~22 fold together with drastic changes in the absorption spectra that yields a prominent colour change in the solution from orange to yellow. These seldom reported emissive H-aggregates of TO, serve as an efficient platform for Heparin detection with a LOD of 19 nM, fluorometrically and 34 nM, colorimetrically. The TO-Heparin complex is also accompanied by a large change in the excited-state lifetime. The TO-Heparin complex has been further utilized for the detection of Protamine, which is the only medically affirmed antitoxin of Heparin. Overall, our sensing system offers several advantages, such as, simple, dual read-out, economic and specific detection of Heparin with longer excitation and emission wavelength, rapid naked eye detection and utilizes an in-expensive commercially available fluoprophore, TO. Most importantly, our sensing system also displays a good performance in the biologically complex human serum matrix.

Chemical sensors for selective and quantitative heparin sensing

In this review article, chemical sensors for selective and quantitative heparin sensing are discussed with detailed examples.

Heparin sensing based on multisite-binding induced highly ordered perylene nanoaggregates

Heparin sensing based on highly ordered perylene nanoaggregates with ultra-low fluorescence and the use of host–guest complexes to improve the sensitivity.

Fabrication of Orange-Emitting Organic Nanoparticle-Protamine Conjugate: Fluorimetric Sensor of Heparin

Among the diverse sensing techniques, fluorimetric detection dominates over the other methods because of its rapid signaling, high selectivity and sensitivity, and operational simplicity. This present article delineates fabrication of a fluorescent organic nanoparticle-protamine (FONP-Pro) conjugate for selective and sensitive detection of heparin simply by exploitation of the aggregation-induced emission (AIE) property of the FONPs. Naphthalene diimide-based bola-type amphiphilic molecules (NDI-1) comprise a naphthyl residue and a 3-aminopyridyl unit at both terminals, forming organic nanoparticles in a dimethyl sulfoxide-water binary solvent mixture, and exhibited AIE through excimer formation. The presence of naphthyl residue in the molecular backbone facilitates the intramolecular charge transfer to generate orange-emitting (λ_em = 594 nm) AIE-luminogen (AIE-gen). The aminopyridine residues within NDI-1 induced negative surface charge on NDI-1 FONPs, which facilitated interaction with positively charged protamine (Pro) to construct FONP-Pro conjugates. Formation of this NDI-1 FONP-Pro conjugate through the interaction between Pro and FONP drastically reduced the orange emission intensity (fluorescence off) of the AIE-gens. Interestingly, addition of heparin to this FONP-Pro conjugate turned on the fluorescence signal of FONPs through unwinding of the Pro from the FONP surface because of a strong binding affinity between heparin and Pro. Formation of the FONP-Pro conjugate and fluorimetric sensing of heparin was investigated by monitoring the change in emission behavior of NDI-1 FONPs. Also, the heparin-sensing was found to be highly selective against many other biomolecules including proteins, enzymes, and DNA. Hence, a selective and efficient heparin sensor (FONP-Pro) was developed having a limit of detection of 12 nM simply by utilizing the fluorescence "turn-off" and "turn-on" mechanism of NDI-1 FONP.

Precisely Defined Conjugated Oligoelectrolytes for Biosensing and Therapeutics

Conjugated oligoelectrolytes (COEs) are a relatively new class of synthetic organic molecules with, as of yet, untapped potential for use in organic optoelectronic devices and bioelectronic systems. COEs also offer a novel molecular approach to biosensing, bioimaging, and disease therapy. Substantial progress has been made in the past decade at the intersection of chemistry, materials science, and the biological sciences developing COEs and their polymer analogues, namely, conjugated polyelectrolytes (CPEs), into synthetic systems with biological and biomedical utility. CPEs have traditionally attracted more attention in arenas of sensing, imaging, and therapy. However, the precisely defined molecular structures and interactions of COEs offer potential key advantages over CPEs, including higher reliability and fluorescence quantum efficiency, larger diversity of subcellular targeting strategies, and improved selectivity to biomolecules. Here, the unique-and sometimes overlooked-properties of COEs are discussed and the noticeable progress in their use for biological sensing, imaging, and therapy is reviewed.

Superparamagnetic nanoarchitectures for disease-specific biomarker detection

Synthesis, bio-functionalization, and multifunctional activities of superparamagnetic-nanostructures have been extensively reviewed with a particular emphasis on their uses in a range of disease-specific biomarker detection and associated challenges.

A ratiometric fluorometric heparin assay based on the use of CdTe and polyethyleneimine-coated carbon quantum dots

CdTe quantum dots (QDs) were integrated with polyethyleneimine-coated carbon dots (PEI-CDs) to form a dually emitting probe for heparin. The red fluorescence of the CdTe QDs is quenched by the PEI-CDs due to electrostatic interactions. In the presence of heparin, the blue fluorescence of PEI-CDs remains unaffected, while its quenching effect on the fluorescence of CdTe QDs is strongly reduced. A ratiometric fluorometric assay was worked out. The ratio of the fluorescences at 595 and 436 nm serves as the analytical signal. Response is linear in the concentration range of 50-600 ng·mL^-1 (0.1-1.2 U·mL^-1) of heparin. The limit of detection is 20 ng·mL^-1 (0.04 U·mL^-1). This makes the method a valuable tool for heparin monitoring during postoperative and long-term care. This assay is relatively free from the interference by other analogues which commonly co-exist with heparin in samples, and it is more robust than single-wavelength based assays. Graphical abstract In the presence of heparin, the fluorescence of polyethyleneimine-coated carbon dots (PEI-CDs) at 436 nm remains unaffected, while its quenching effect on the fluorescence of CdTe at 595 nm is strongly reduced.

A molecular rotor based ratiometric sensor for basic amino acids

The inevitable importance of basic amino acids, arginine and lysine, in human health and metabolism demands construction of efficient sensor systems for them. However, there are only limited reports on the 'ratiometric' detection of basic amino acids which is further restricted by the use of chemically complex sensor molecules, which impedes their prospect for practical applications. Herein, we report a ratiometric sensor system build on simple mechanism of disassociation of novel emissive Thioflavin-T H-aggregates from heparin surface, when subjected to interaction with basic amino acids. The strong and selective electrostatic and hydrogen bonding interaction of basic amino acids with heparin leads to large alteration in photophysical attributes of heparin bound Thioflavin-T, which forms a highly sensitive sensor platform for detection of basic amino acids in aqueous solution. These selective interactions between basic amino acids and heparin allow our sensor system to discriminate arginine and lysine from other amino acids. This unique mechanism of dissociation of Thioflavin-T aggregates from heparin surface provides ratiometric response on both fluorimetric and colorimetric outputs for detection of arginine and lysine, and thus it holds a significant advantage over other developed sensor systems which are restricted to single wavelength detection. Apart from the sensitivity and selectivity, our system also provides the advantage of simplicity, dual mode of sensing, and more importantly, it employs an inexpensive commercially available probe molecule, which is a significant advantage over other developed sensor systems that uses tedious synthesis protocol for the employed probe in the detection scheme, an impediment for practical applications. Additionally, our sensor system also shows response in complex biological media of serum samples.

A sensitive SPR biosensor based on hollow gold nanospheres and improved sandwich assay with PDA-Ag@Fe3O4/rGO

A novel surface plasmon resonance (SPR) biosensor based on hollow gold nanospheres (HGNPs) and an improved sandwich assay was developed to detect rabbit IgG. The electromagnetic coupling between the HGNPs and Au film, and the notable plasmonic fields spread over the inner and outer surfaces of HGNPs, led to the considerable amplification of the SPR signal. Polydopamine-Ag@Fe₃O₄/reduced graphene oxide (PDA-Ag@Fe₃O₄/rGO) was introduced to bind detection antibody (Ab₂) to form the improved sandwich structure. Ag nanoparticles were excited to produce SPR and their hot electrons were doped on graphene thin films, which amplified the response of biomolecules. Magnetic nanoparticles (Fe₃O₄) simplified the collection of Ab₂-PDA-Ag@Fe₃O₄/rGO. An external layer of polydopamine (PDA) permitted the efficient immobilization of Ab₂ without activation via abundant functional groups and protected the nanoparticles from etching or agglomeration. In addition, because of its large mass, Ab₂-PDA-Ag@Fe₃O₄/rGO also played a key role in the further amplification of the SPR response signals. This novel SPR biosensor exhibited an effective response to the rabbit IgG at the different concentrations ranging from 0.019 to 40.00μgmL^-1. This value is 132 times lower than that observed for a traditional SPR biosensor based on Au-3-mercaptopropionic acid and 8 times lower than that obtained from an Ab₂ sandwich assay, which indicates that the SPR sensor has high sensitivity. In addition, the designed biosensor showed satisfactory recoveries to detect the rabbit IgG spiked in serum samples. Therefore, the novel SPR biosensor with high sensitivity and acceptable recovery has potential for practical applications.

Colorimetric sensors for rapid detection of various analytes

Sensor technology for the rapid detection of the analytes with high sensitivity and selectivity has several challenges. Despite the challenges, colorimetric sensors have been widely accepted for its high sensitive and selective response towards various analytes. In this review, colorimetric sensors for the detection of biomolecules like protein, DNA, pathogen and chemical compounds like heavy metal ions, toxic gases and organic compounds have been elaborately discussed. The visible sensing mechanism based on Surface Plasmon Resonance (SPR) using metal nanoparticles like Au, Ag, thin film interference using SiO₂ and colorimetric array-based technique have been highlighted. The optical property of metal nanoparticles enables a visual color change during its interaction with the analytes owing to the dispersion and aggregation of nanoparticles. Recently, colorimetric changes using silica substrate for detection of protein and small molecules by thin film interference as a visible sensing mechanism has been developed without the usage of fluorescent or radioisotopes labels. Multilayer of biomaterials were used as a platform where reflection and interference of scattering light occur due to which color change happens leading to rapid sensing. Colorimetric array-based technique for the detection of organic compounds using chemoresponsive dyes has also been focused wherein the interaction of the analytes with the substrate coated with chemoresponsive dyes gives colorimetric change.

Fluorescent Strips of Electrospun Fibers for Ratiometric Sensing of Serum Heparin and Urine Trypsin

"Turn-on" or "turn-off" probes remain challenges in the establishment of sensitive, easily operated, and reliable methods for in situ monitoring bioactive substances. In the current study, electrospun fibrous strips are designed to provide straightforward observations of ratiometric color changes with the naked eye in the presence of serum heparin or urine trypsin. A tetraphenylethene (TPE) derivative is constructed and along with phloxine B is grafted on fibers, followed by protamine adsorption to induce static quenching of phloxine B and aggregation-induced emission of the TPE derivative. The presence of heparin or trypsin removes protamine to restore the fluorescence of phloxine B at 574 nm (I₅₇₄) and relieve the emission of the TPE derivative at 472 nm (I₄₇₂). The grafting densities of phloxine B and the TPE derivative are essential to achieve the optimal fluorescence-intensity ratio of I₅₇₄/I₄₇₂ for the ratiometric detection of heparin and trypsin. Under illumination by an ultraviolet lamp, the fibrous mats turn from cyan to green in the presence of heparin at 0.4 U/mL and to a bright yellow at 0.8 U/mL, which is feasible in sensing serum heparin levels during postoperative and long-term care of patients after cardiovascular surgery. The protamine digestion results in similar color transitions with increasing trypsin levels up to 8 μg/mL, indicating the potential for monitoring urine trypsin levels of pancreas transplant patients. The color strips based on the ratiometric fluorescent response indicate advantages in lowering the detection limit and improving the accuracy and reproducibility, bearing great potential for a real-time and naked-eye detection of bioactive substances as self-test devices.

Sensing Active Heparin by Counting Aggregated Quantum Dots at Single-Particle Level

Developing highly sensitive and highly selective assays for monitoring heparin levels in blood is required during and after surgery. In previous studies, electrostatic interactions are exploited to recognize heparin and changes in light signal intensity are used to sense heparin. In the present study, we developed a quantum dot (QD) aggregation-based detection strategy to quantify heparin. When cationic micelles and fluorescence QDs modified with anti-thrombin III (AT III) are added into heparin sample solution, the AT III-QDs, which specifically bind with heparin, aggregate around the micelles. The aggregated QDs are recorded by spectral imaging fluorescence microscopy and differentiated from single QDs based on the asynchronous process of blue shift and photobleaching. The ratio of aggregated QD spots to all counted QD spots is linearly related to the amount of heparin in the range of 4.65 × 10 ^-4 U/mL to 0.023 U/mL. The limit of detection is 9.3 × 10 ^-5 U/mL (∼0.1 nM), and the recovery of the spiked heparin at 0.00465 U/mL (∼5 nM) in 0.1% human plasma is acceptable.

Emissive H-Aggregates of an Ultrafast Molecular Rotor: A Promising Platform for Sensing Heparin

Constructing "turn on" fluorescent probes for heparin, a most widely used anticoagulant in clinics, from commercially available materials is of great importance, but remains challenging. Here, we report the formation of a rarely observed emissive H-aggregate of an ultrafast molecular rotor dye, Thioflavin-T, in the presence of heparin, which provides an excellent platform for simple, economic and rapid fluorescence turn-on sensing of heparin. Generally, H-aggregates are considered as serious problem in the field of biomolecular sensing, owing to their poorly emissive nature resulting from excitonic interaction. To the best of our knowledge, this is the first report, where contrastingly, the turn-on emission from the H-aggregates has been utilized in the biomolecule sensing scheme, and enables a very efficient and selective detection of a vital biomolecule and a drug with its extensive medical applications, i.e., heparin. Our sensor system offers several advantages including, emission in the biologically advantageous red-region, dual sensing, i.e., both by fluorimetry and colorimetry, and most importantly constructed from in-expensive commercially available dye molecule, which is expected to impart a large impact on the sensing field of heparin. Our system displays good performance in complex biological media of serum samples. The novel Thioflavin-T aggregate emission could be also used to probe the interaction of heparin with its only clinically approved antidote, Protamine.

A Nanoscale Tool for Photoacoustic-Based Measurements of Clotting Time and Therapeutic Drug Monitoring of Heparin

Heparin anticoagulation therapy is an indispensable feature of clinical care yet has a narrow therapeutic window and is the second most common intensive care unit (ICU) medication error. The active partial thromboplastin time (aPTT) monitors heparin but suffers from long turnaround times, a variable reference range, limited utility with low molecular weight heparin, and poor correlation to dose. Here, we describe a photoacoustic imaging technique to monitor heparin concentration using methylene blue as a simple and Federal Drug Administration-approved contrast agent. We found a strong correlation between heparin concentration and photoacoustic signal measured in phosphate buffered saline (PBS) and blood. Clinically relevant heparin concentrations were detected in blood in 32 s with a detection limit of 0.28 U/mL. We validated this imaging approach by correlation to the aPTT (Pearson's r = 0.86; p < 0.05) as well as with protamine sulfate treatment. This technique also has good utility with low molecular weight heparin (enoxaparin) including a blood detection limit of 72 μg/mL. We then used these findings to create a nanoparticle-based hybrid material that can immobilize methylene blue for potential applications as a wearable/implantable heparin sensor to maintain drug levels in the therapeutic window. To the best of our knowledge, this is the first use of photoacoustics to image anticoagulation therapy with significant potential implications to the cardiovascular and surgical community.

Pharmacology of Heparin and Related Drugs

Heparin has been recognized as a valuable anticoagulant and antithrombotic for several decades and is still widely used in clinical practice for a variety of indications. The anticoagulant activity of heparin is mainly attributable to the action of a specific pentasaccharide sequence that acts in concert with antithrombin, a plasma coagulation factor inhibitor. This observation has led to the development of synthetic heparin mimetics for clinical use. However, it is increasingly recognized that heparin has many other pharmacological properties, including but not limited to antiviral, anti-inflammatory, and antimetastatic actions. Many of these activities are independent of its anticoagulant activity, although the mechanisms of these other activities are currently less well defined. Nonetheless, heparin is being exploited for clinical uses beyond anticoagulation and developed for a wide range of clinical disorders. This article provides a "state of the art" review of our current understanding of the pharmacology of heparin and related drugs and an overview of the status of development of such drugs.

Modulating luminescence of Tb(3+) with biomolecules for sensing heparin and its contaminant OSCS

The detection of heparin (Hep) and its contaminant oversulfated chondroitin sulfate (OSCS) is of great importance in clinics but remains challenging. Here, we report a sensitive and selective time-resolved luminescence (TRL) biosensing system for Hep by modulating the photoluminescence of Tb(3+) with guanine-rich ssDNA and Hep-specific AG73 peptide (RKRLQVQLSIRT). With the developed system, Hep including both unfractionated Hep (UFH) and the low molecular weight Hep (LMWH) has been successfully detected with a satisfactory detection limit. Owing to the highly specific interaction between Hep and AG73 peptide, major interfering substances in Hep detection, such as Hep analogs of chondrotin sulfate (Chs) and hyaluronic acid (HA), did not interfere with Hep detection. The established TRL sensing system was then successfully used for monitoring Hep metabolism in living rats by microdialysis. Moreover, the proposed TRL sensing system was further applied to analyze OSCS contaminant in Hep with heparinases treatment by exploring the inhibition effects of OSCS on the activity of heparinases. As low as 0.002% of OSCS in Hep was identified.

Biocontrol and Rapid Detection of Food-Borne Pathogens Using Bacteriophages and Endolysins

Bacteriophages have been suggested as natural food preservatives as well as rapid detection materials for food-borne pathogens in various foods. Since Listeria monocytogenes-targeting phage cocktail (ListShield) was approved for applications in foods, numerous phages have been screened and experimentally characterized for phage applications in foods. A single phage and phage cocktail treatments to various foods contaminated with food-borne pathogens including E. coli O157:H7, Salmonella enterica, Campylobacter jejuni, Listeria monocytogenes, Staphylococcus aureus, Cronobacter sakazakii, and Vibrio spp. revealed that they have great potential to control various food-borne pathogens and may be alternative for conventional food preservatives. In addition, phage-derived endolysins with high host specificity and host lysis activities may be preferred to food applications rather than phages. For rapid detection of food-borne pathogens, cell-wall binding domains (CBDs) from endolysins have been suggested due to their high host-specific binding. Fluorescence-tagged CBDs have been successfully evaluated and suggested to be alternative materials of expensive antibodies for various detection applications. Most recently, reporter phage systems have been developed and tested to confirm their usability and accuracy for specific detection. These systems revealed some advantages like rapid detection of only viable pathogenic cells without interference by food components in a very short reaction time, suggesting that these systems may be suitable for monitoring of pathogens in foods. Consequently, phage is the next-generation biocontrol agent as well as rapid detection tool to confirm and even identify the food-borne pathogens present in various foods.

Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology

Recently, the nanostructured modified molecularly imprinting polymer has created a great attention in research field due to its excellent properties such as high surface to volume ratio, low cost, and easy preparation/handling. Among the nanostructured materials, the carbonaceous material such as 'graphene' has attracted the tremendous attention of researchers owing to their fascinating electrical, thermal and physical properties. In this review article, we have tried to explore as well as compile the role of graphene-based nanomaterials in the fabrication of imprinted polymers. In other words, herein the recent efforts made to introduce selectivity in graphene-based nanomaterials were tried collected together. The major concern of this review article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanoparticles, graphene@carbon nanotubes and molecularly imprinted polymers. Additionally, the combination of graphene and quantum dots was also included to explore the fluorescence properties of zero-band-gap graphene.

Merocyanine 540 adsorbed on polyethylenimine-functionalized graphene oxide nanocomposites as a turn-on fluorescent sensor for bovine serum albumin

We suggest a simple, fast, sensitive and selective BSA sensor designed by assembling MC540 molecules on PEI–GO nanocomposites.

Tuning cell surface charge in E. coli with conjugated oligoelectrolytes

Conjugated oligoelectrolytes intercalate into and associate with membranes, thereby changing the surface charge of microbes, as determined by zeta potential measurements.

Cationic conjugated oligoelectrolytes (COEs) varying in length and structural features are compared with respect to their association with E. coli and their effect on cell surface charge as determined by zeta potential measurements. Regardless of structural features, at high staining concentrations COEs with longer molecular dimensions associate less, but neutralize the negative surface charge of E. coli to a greater degree than shorter COEs.

A "turn on" fluorescent probe for heparin and its oversulfated chondroitin sulfate contaminant

Designing "turn on" fluorescent probes for heparin (Hep), a widely used anticoagulant in clinics, is of great importance but remains challenging. By introducing a Hep specific binding peptide AG73 to a typical aggregation induced emission (AIE) fluorogen, tetraphenylethene (TPE), a sensitive and selective "turn on" fluorescent probe named TPE-1 for Hep was developed. TPE-1 was able to detect Hep in a wide pH range of 3-10 without obvious interference from tested anions and biomolecules, especially Hep analogues known as chondroitin sulfate (Chs) and hyaluronic acid (HA). The detection limit of Hep sensing was 3.8 ng mL-1, which was far below the clinically demanded concentration of Hep. The probe was applicable to both unfractionated Hep and low molecular weight Hep, the two main heparin products clinically used. Besides, the fluorescence of Hep bound TPE-1 can be turned off via sequential treatment with heparinases. Importantly, this phenomenon allows us to develop an enzyme assisted strategy for "turn on" sensing of oversulfated chondroitin sulfate (OSCS) with a detection limit of 0.001% (w%), which is the main contaminant in Hep and may cause severe adverse reactions including death.

Pyrene Excimer-Based Peptidyl Chemosensors for the Sensitive Detection of Low Levels of Heparin in 100% Aqueous Solutions and Serum Samples

Fluorescent chemosensors (1 and 2, Py-(Arg)nGlyGlyGly(Arg)nLys(Py)-NH2, n = 2 and 3) bearing two pyrene (Py) labeled heparin-binding peptides were synthesized for the sensitive ratiometric detection of heparin. The peptidyl chemosensors (1 and 2) sensitively detected nanomolar concentrations of heparin in aqueous solutions and in serum samples via a ratiometric response. In 100% aqueous solutions at pH 7.4, both chemosensors exhibited significant excimer emission at 486 nm as well as weak monomer emission in the absence of heparin. Upon the addition of heparin into the solution, excimer emission increased with a blue shift (10 nm) and monomer emission at 376 nm decreased. The chemosensors showed a similar sensitive ratiometric response to heparin independent of the concentration of the chemosensors. The peptidyl chemosensors were applied to the ratiometric detection of heparin over a wide range of pH (1.5-11.5) using the excimer/momomer emission changes. In the presence of serum, 1 and 2 displayed significant monomer emission at 376 nm with relatively weak excimer emission and the addition of heparin induced a significant increase in excimer emission at 480 nm and a concomitant decrease in monomer emission. The enhanced ratiometric response to heparin in the serum sample was due to the interactions between the peptidyl chemosensors and serum albumin in the serum sample. The detection limits of 2 for heparin were less than 1 nM in 100% aqueous solutions and serum samples. The peptidyl chemosensors bearing two heparin-binding sites are a suitable tool for the sensitive ratiometric detection of nanomolar concentrations of heparin in 100% aqueous solutions and serum samples.

Phenylenevinylene conjugated oligoelectrolytes as fluorescent dyes for mammalian cell imaging

Conjugated phenylenevinylene oligoelectrolytes, which consist of a phenylenevinylene core equipped at each end with hydrophilic pendent groups, are shown to be good candidates for mammalian cell membrane staining. When used in the micromolar concentration range, they express low to moderate cell toxicity for selected regular and cancerous cell lines as tested for adherent and suspension cells.

Graphene-based protein biomarker detection

An ability to detect and quantify protein molecules, harbingers of specific pathologies, potentially underpins both early disease diagnosis and an assessment of treatment efficacy. However, the specific detection of a particular protein biomarker in a complex environment is by no means an easy task and requires a progressive improvement in sensor technology. The high surface area, volume, electrical conductance, atomic level thickness and apparent biocompatibility of graphene makes it potentially an exceedingly powerful transducer of biorecognition events; the demands of its application in biosensing, and progress to date are reviewed herein.

Pendant ionic groups of conjugated oligoelectrolytes govern their ability to intercalate into microbial membranes

The ionic groups of lipid membrane intercalating conjugated oligoelectrolytes affect their interaction with E. coli and application in microbial fuel cells.