Method of applying internal standard to dried matrix spot samples for use in quantitative bioanalysis

Identification of Benzodiazepine Use Based on Dried Blood Stains Analysis

Biological matrices are typically used in forensic toxicological or pharmacological analysis: mainly blood, vitreous humor or urine. However, there are many cases in which crimes are a consequence of drug intoxication or drug abuse and they are not closed because over the months or years the samples become altered or decomposed. A dried blood stains test (DBS-MS) has recently been proposed to be used in drug toxicology when blood is found at a crime scene. This test could help an investigator to reveal what a person had consumed before the perpetration of the crime. In order to check the possibilities of this test, we analyzed several dried blood stains located on a cotton fabric. Therefore, the aim of this study was to determine if the analysis of a dried blood spot located on a cotton fabric could be an alternate source of obtaining toxicological results, particularly regarding benzodiazepines. We splashed blood stains on cotton fabric with different concentrations of the following benzodiazepines: alprazolam, bromazepam, clonazepam, diazepam and lorazepam, which were dried for 96 h and subsequently quantified by high-performance liquid chromatography coupled mass spectrometry (HPLC-MS). Our results show that it is possible to identify several benzodiazepines contained in a cotton fabric blood stain; consequently, this method may add another sample option to the toxicological analysis of biological vestiges found at a crime scene.

Biological Fluid Microsampling for Therapeutic Drug Monitoring: A Narrative Review

Therapeutic drug monitoring (TDM) is a specialized area of laboratory medicine which involves the measurement of drug concentrations in biological fluids with the aim of optimizing efficacy and reducing side effects, possibly modifying the drug dose to keep the plasma concentration within the therapeutic range. Plasma and/or whole blood, usually obtained by venipuncture, are the "gold standard" matrices for TDM. Microsampling, commonly used for newborn screening, could also be a convenient alternative to traditional sampling techniques for pharmacokinetics (PK) studies and TDM, helping to overcome practical problems and offering less invasive options to patients. Although technical limitations have hampered the use of microsampling in these fields, innovative techniques such as 3-D dried blood spheroids, volumetric absorptive microsampling (VAMS), dried plasma spots (DPS), and various microfluidic devices (MDS) can now offer reliable alternatives to traditional samples. The application of microsampling in routine clinical pharmacology is also hampered by the need for instrumentation capable of quantifying analytes in small volumes with sufficient sensitivity. The combination of microsampling with high-sensitivity analytical techniques, such as liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), is particularly effective in ensuring high accuracy and sensitivity from very small sample volumes. This manuscript provides a critical review of the currently available microsampling devices for both whole blood and other biological fluids, such as plasma, urine, breast milk, and saliva. The purpose is to provide useful information in the scientific community to laboratory personnel, clinicians, and researchers interested in implementing the use of microsampling in their routine clinical practice.

Development of the dried blood spot preparation protocol for comprehensive evaluation of the hematocrit effect

The application of dried blood spots (DBS) has gradually increased in different fields because of its several advantages. The hematocrit (Hct) effect is one major analytical challenge that may affect the quantification accuracy of DBS samples and should be investigated when developing a novel DBS method. However, previous studies usually overlooked the Hct-related distribution bias when evaluating the Hct effect. This study aimed to propose an effective DBS preparation protocol for the comprehensive evaluation of the Hct effect. We selected voriconazole and posaconazole as the demonstration drugs. Fifteen microliters of the blood samples were spotted on DBS cards followed by whole spot extraction. An LC-MS/MS method was first developed to quantify voriconazole and posaconazole in DBS samples. The quantitation accuracy for both azole drugs was within 93.5%-111.7%, except for the accuracies of posaconazole at the LLOQ, which were less than 119%. The intra- and interday precision were below 11%. The validated LC-MS/MS method was used to develop the DBS preparation protocol for evaluating the Hct effect. Three critical parameters that may affect the observed Hct effect were investigated. The results showed that using the solid-state of the target analytes, spiking the target analytes before preparing different Hct levels, and allowing enough equilibrium time after spiking target analytes can provide a more holistic Hct effect evaluation. The validity of the proposed new protocol was verified by conversion factors obtained from 71 paired DBS and plasma samples. Conversion factors calculated by clinical samples were consistent with the Hct effect evaluated by manually prepared DBS samples. This new DBS preparation protocol eliminated the common pitfalls in studying the Hct effect and offered a comprehensive strategy to assess the Hct effect for further DBS studies.

Dried blood microsampling-assisted therapeutic drug monitoring of immunosuppressants: An overview

In the field of solid organ transplantation, chemotherapy and autoimmune disorders, treatment with immunosuppressant drugs requires intensive follow-up of the blood concentrations via therapeutic drug monitoring (TDM) because of their narrow therapeutic window and high intra- and inter-subject variability. This requires frequent hospital visits and venepunctures to allow the determination of these analytes, putting a high burden on the patients. In the context of patient-centric thinking, it is becoming increasingly established that at least part of these conventional blood draws could be replaced by microsampling, allowing home-sampling and increasing the quality of life for these patients. In this review we discuss the published methods - mostly using liquid chromatography coupled to tandem mass spectrometry - that have utilized (volumetric) dried blood samples as an alternative for conventional liquid whole blood for the TDM of immunosuppressant drugs. Furthermore, some pre-analytical considerations using DBS or volumetric alternatives are considered, as well as the applicability on clinical samples. The implementation status in clinical practice is also discussed, including (1) the cost-effectiveness of this approach compared to venepuncture, (2) the availability of multiplexed methods, (3) the status of harmonization and (4) patient perception. A brief perspective on potential future developments for the dried blood-based TDM of immunosuppressant drugs is provided, by considering how obstacles for the implementation of these strategies into clinical practice might be overcome.

UHPLC-HRMS Method for the Simultaneous Screening of 235 Drugs in Capillary Blood for Doping Control Purpose: Comparative Evaluation of Volumetric and Non-volumetric Dried Blood Spotting Devices

We present a quick and simple multi-targeted analytical workflow based on ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry for the screening in dried blood spots and dried plasma spots of a wide variety of drugs with different chemical properties. Seven different microsampling devices were evaluated in view of their application for the detection of the selected target analytes in the framework of doping control analysis. The extraction of the analytes was optimized by assessing the efficacy of protocols based on ultrasonication with aqueous buffers and/or organic solvents of different polarities. Optimal recoveries were obtained by using pure methanol or mixtures of methanol/acetonitrile and methanol/isopropanol, depending on both the device and the target analytes. The method was fully validated according to both ISO17025 and the requirements of the World Anti-Doping Agency: all the analytes were clearly distinguishable from the matrix, with limits of detection in the range of 0.1-3.0 ng mL^-1. Stability studies simulating the storage of samples before the analysis and in view of a possible re-analysis showed that most of the analytes were stable for at least 24 h at 50 °C and for at least 3 weeks at 25 and at 4 °C. The real applicability of the method was assessed by analyzing the samples collected after the administration of two model drugs, acetazolamide and deflazacort. The performance of the method was confirmed to be fit for purpose, and data obtained in blood can also be used to complement those available in urine, allowing to refine the knowledge concerning the pharmacokinetic profiles.

Parallel Reaction Monitoring Mode for Atenolol Quantification in Dried Plasma Spots by Liquid Chromatography Coupled with High-Resolution Mass Spectrometry

In this study, we reported a rapid, sensitive, robust, and validated method for atenolol quantification in dried plasma spots (DPS) by liquid chromatography with high-resolution mass spectrometry (LC-HRMS) using parallel reaction monitoring mode (PRM). Aliquots of 25 µL human plasma were placed onto Whatman 903 Cards and air-dried. Disks (3.2 mm internal diameter) were punched, and a 100 µL working internal standard solution was added to each sample and then incubated on a shaker for 15 min at 40 °C, followed by rapid centrifugation (10,000× g, 10 s). The supernatant was transferred into 300 µL vials for subsequent LC–HRMS analysis. After chromatographic separation, atenolol and the internal standard were quantified in positive-ion parallel reaction monitoring mode by detection of all target product ions at 10 ppm tolerances. The total time of the analysis was 5 min. The calibration curve was linear in the range of 5–1000 ng/mL with interday and intraday precision levels and biases of <14.4%, and recovery was 62.9–81.0%. The atenolol in DPS was stable for ≥30 days at 25 and 4 °C. This fully validated method is selective and suitable for atenolol quantitation in DPS using LC–HRMS.

Dried blood spots analysis of 6β-hydroxycortisol and cortisol using liquid chromatography/tandem mass spectrometry for calculating 6β-hydroxycortisol to cortisol ratio

Dried blood spot (DBS) sampling is a minimally invasive method used to collect blood samples of any population for personalized medicine. We aimed to develop a sensitive and reliable analytical method for measuring 6β-hydroxycortisol (6β-OHF) and cortisol concentrations in DBS by liquid chromatography/tandem mass spectrometry so as to utilize DBS as a less invasive blood sampling method for calculating the ratio of 6β-OHF/cortisol. The lower limits of quantification obtained using four DBS were 1.08 pg/50 μl for 6β-OHF and 1.01 pg/50 μl for cortisol. The 6β-OHF and cortisol in DBS were stable for 28 days at room temperature. The intraday and interday accuracy and precision of the method was <12%. Additionally, the 6β-OHF and cortisol in DBS were measured before, during, and after 3 days of clarithromycin administration to two of the subjects. Then, their concentration was compared in the plasma and whole blood collected simultaneously. The concentrations of 6β-OHF and cortisol in four DBS ranged from 0.007 to 0.079 ng/50 μl and from 1.15 to 6.66 ng/50 μl, respectively. The 6β-OHF/cortisol ratio in DBS decreased by approximately 50% on administering clarithromycin compared with that before the administration of clarithromycin. The 6β-OHF/cortisol ratio in DBS also showed a strong correlation with that in whole blood (r = 0.9694) and plasma (r = 0.9383). This method provides high accuracy and precision for measuring 6β-OHF and cortisol in DBS. It also allows the use of DBS instead of plasma for calculating the 6β-OHF/cortisol ratio. The 6β-OHF/cortisol ratio could be an index of CYP3A activity in clinical setting.

Dried matrix spots in forensic toxicology

Dried matrix spots (DMS) has gained the attention of different professionals in different fields, including toxicology. Investigations have been carried out in order to assess the potential of using DMS for the analysis of illicit substances, the main interest of forensic toxicologists. This technique uses minimal volumes of samples and solvents, resulting in simple and rapid extraction procedures. Furthermore, it has proved to increase analyte stability, improving storage and transportation. However, DMS presents some limitations: the hematocrit influencing accuracy and inconsistencies regarding the means of spotting samples and adding internal standard on paper. Thus, we provide an overview of analytical methodologies with forensic applications focusing on drugs of abuse and discussing the main particularities, limitations and achievements.

Solutions for hematocrit bias in dried blood spot hormone analysis

Over the last years, dried blood spot (DBS) sampling has gained significant interest due to development of analytical techniques combined with DBS, the simplicity and low cost of the method. Despite its wide use, DBS sampling can lead to inaccurate results due to the impact of the hematocrit (Hct) on the analysis. Some analytes have shown to be hardly impacted by Hct values. However, in other cases, a significant impact of Hct is observed, which requires the use of alternative approaches to circumvent this issue. This review describes the possible impact of Hct-related bias in DBS sampling in the context of hormone analysis and discusses the different methodologies that can be used to overcome this bias to ensure accurate results.

Dried blood spots in doping analysis

A series of dried blood spot (DBS) detection methods for doping agents have been developed in the last two decades. The DBS technique minimizes invasiveness and reduces storage and shipping costs. Recently, the World Anti-Doping Agency announced the use of DBS for the 2022 Beijing Winter Olympic Games and Paralympic Games owing to the advantages of the DBS application in routine doping control. Therefore the further development of detection methods for doping agents in DBS is important and urgent. This review summarizes five aspects of DBS application in doping analysis: sample collection, storage conditions, pretreatment, instrumentation and validation according to the Prohibited List issued by the World Anti-Doping Agency, and proposes some suggestions for future studies of DBS in doping analysis.

Validation of a simple liquid chromatography coupled to tandem mass spectrometry method for the simultaneous determination of tacrolimus, sirolimus, everolimus and cyclosporin A in dried matrix on paper discs

INTRODUCTION

Due to its high specificity and sensitivity, liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is the gold standard method for immunosuppressant quantification in therapeutic drug monitoring. In this context, dried blood spots (DBS) have become a promising strategy as a sample collection procedure. Although the advantages of DBS over venipuncture are well known, this approach has limitations that strongly influence the acceptance of analytical results. Among them, the most important is hematocrit (Ht). The easiest way of overcoming this problem is by analyzing complete spots. In this strategy, called dried matrix on paper discs (DMPD), blood is volumetrically applied on pre-punched discs.

OBJECTIVES

To validate an LC-MS/MS method for the quantification of tacrolimus, sirolimus, everolimus and cyclosporin A using DMPD.

METHODS

The procedure was validated according to international guidelines using a commercial kit. The following performance parameters were evaluated: selectivity, carryover, linearity, accuracy, precision, lower limit of quantitation, relative recovery, commutability and stability. In addition, a method comparison study was performed to evaluate the clinical influence of Ht on the results.

RESULTS

All performance parameters were within acceptance criteria and, hence, it was determined that the validated method is fit for the intended purpose. Likewise, calculated bias values on medical decision levels showed that there was no clinical influence of Ht on the results.

CONCLUSION

Unlike other similar methodologies that have been published, here, a simple method has been fully validated. This is the first LC-MS/MS methodology adapting a commercial kit to use DMPD as a sampling strategy.

A review of recent advances in microsampling techniques of biological fluids for therapeutic drug monitoring

Conventional sampling of biological fluids often involves a bulk quantity of samples that are tedious to collect, deliver and process. Miniaturized sampling approaches have emerged as promising tools for sample collection due to numerous advantages such as minute sample size, patient friendliness and ease of shipment. This article reviews the applications and advances of microsampling techniques in therapeutic drug monitoring (TDM), covering the period January 2015 - August 2020. As whole blood is the gold standard sampling matrix for TDM, this article comprehensively highlights the most historical microsampling technique, the dried blood spot (DBS), and its development. Advanced developments of DBS, ranging from various automation DBS, paper spray mass spectrometry (PS-MS), 3D dried blood spheroids and volumetric absorptive paper disc (VAPD) and mini-disc (VAPDmini) are discussed. The volumetric absorptive microsampling (VAMS) approach, which overcomes the hematocrit effect associated with the DBS sample, has been employed in recent TDM. The sample collection and sample preparation details in DBS and VAMS are outlined and summarized. This review also delineates the involvement of other biological fluids (plasma, urine, breast milk and saliva) and their miniaturized dried matrix forms in TDM. Specific features and challenges of each microsampling technique are identified and comparison studies are reviewed.

Determination of antipsychotic drugs in oral fluid using dried saliva spots by gas chromatography-tandem mass spectrometry

The present work describes the optimization and validation of an analytical method for the determination of six antipsychotic drugs (chlorpromazine, levomepromazine, cyamemazine, clozapine, haloperidol, and quetiapine) in oral fluid samples after solvent extraction from dried saliva spots, by gas chromatography coupled to tandem mass spectrometry. The method was fully validated, and the included parameters were selectivity, linearity, limits of quantification, precision and accuracy, stability, and recovery. The method was linear for all compounds from 10 to 400 ng/mL, except for haloperidol (5-100 ng/mL), presenting coefficients of determination higher than 0.99. Inter- and intra-day precision and accuracy were in conformity with the criteria usually seen in bioanalytical method validation; i.e., coefficients of variation were lower than 15% and an accuracy of 15% or better for all studied drugs. The recoveries obtained with this miniaturized technique ranged from 63 to 97%. The herein described method is the first to be reported using the dried saliva spots approach for the analysis of these antypshychotic drugs, proving great sensitivity apart from its simple and fast procedure. The method was considered a good alternative to the conventional techniques to be applied in clinical and toxicological analyses, even more taking into account the extremely low sample volume used (50 μL). Graphical abstract.

Spotting of external calibration standards on blank dried blood spots as a resource-sparing protocol

AIM

Dried blood spots (DBS) offer significant ethical and scientific advantages; however preparation of calibration curves often times, off-sets some of these advantages. We have developed a methodology wherein small volumes of external calibration standards can be spiked on to blank DBS cards.

RESULTS

A total of 2 μl of stock solution spotted on to blank blood spots yielded concentrations that were comparable to those obtained using conventional DBS method. The stability of six analytes on 10-day-old blank spots was within 80-120%. The new methodology was successfully applied to a hydroxycholorquine mouse pharmacokinetics study.

CONCLUSION

Blank DBS samples can be opportunistically prepared from overweight or satellite animals, be stored, and subsequently spiked with standards to prepare calibration standards.

Alternative sampling strategies for the assessment of alcohol intake of living persons

Monitoring of alcohol consumption by living persons takes place in various contexts, amongst which workplace drug testing, driving under the influence of alcohol, driving licence regranting programs, alcohol withdrawal treatment, diagnosis of acute intoxication or fetal alcohol ingestion. The matrices that are mostly used today include blood, breath and urine. The aim of this review is to present alternative sampling strategies that allow monitoring of the alcohol consumption in living subjects. Ethanol itself, indirect (carbohydrate deficient transferrin, CDT%) as well as direct biomarkers (ethyl glucuronide, EtG; ethyl sulphate, EtS; fatty acid ethyl esters, FAEEs and phosphatidylethanol species, PEths) of ethanol consumption will be considered. This review covers dried blood spots (CDT%, EtG/EtS, PEths), dried urine spots (EtG/EtS), sweat and skin surface lipids (ethanol, EtG, FAEEs), oral fluid (ethanol, EtG), exhaled breath (PEths), hair (EtG, FAEEs), nail (EtG), meconium (EtG/EtS, FAEEs), umbilical cord and placenta (EtG/EtS and PEth 16:0/18:1). Main results, issues and considerations specific to each matrix are reported. Details about sample preparation and analytical methods are not within the scope of this review.

Dried blood spots analysis with mass spectrometry: Potentials and pitfalls in therapeutic drug monitoring

Therapeutic drug monitoring (TDM) relays in the availability of specialized laboratory assays, usually available in reference centers that are not accessible to all patients. In this context, there is a growing interest in the use of dried blood spot (DBS) sampling, usually obtained from finger pricks, which allows simple and cost-effective logistics in many settings, particularly in Developing Countries. The use of DBS assays to estimate plasma concentrations is highly dependent on the hematocrit of the blood, as well as the particular characteristics of the measured analyte. DBS assays require specific validation assays, most of them are related to hematocrit effects. In the present manuscript, the application of mass spectrometric assays for determination of drugs for TDM purposes in the last ten years is reviewed, as well as the particular validation assays for new DBS methods.

The use of mass spectrometry to analyze dried blood spots

Dried blood spots (DBS) typically consist in the deposition of small volumes of capillary blood onto dedicated paper cards. Comparatively to whole blood or plasma samples, their benefits rely in the fact that sample collection is easier and that logistic aspects related to sample storage and shipment can be relatively limited, respectively, without the need of a refrigerator or dry ice. Originally, this approach has been developed in the sixties to support the analysis of phenylalanine for the detection of phenylketonuria in newborns using bacterial inhibition test. In the nineties tandem mass spectrometry was established as the detection technique for phenylalanine and tyrosine. DBS became rapidly recognized for their clinical value: they were widely implemented in pediatric settings with mass spectrometric detection, and were closely associated to the debut of newborn screening (NBS) programs, as a part of public health policies. Since then, sample collection on paper cards has been explored with various analytical techniques in other areas more or less successfully regarding large-scale applications. Moreover, in the last 5 years a regain of interest for DBS was observed and originated from the bioanalytical community to support drug development (e.g., PK studies) or therapeutic drug monitoring mainly. Those recent applications were essentially driven by improved sensitivity of triple quadrupole mass spectrometers. This review presents an overall view of all instrumental and methodological developments for DBS analysis with mass spectrometric detection, with and without separation techniques. A general introduction to DBS will describe their advantages and historical aspects of their emergence. A second section will focus on blood collection, with a strong emphasis on specific parameters that can impact quantitative analysis, including chromatographic effects, hematocrit effects, blood effects, and analyte stability. A third part of the review is dedicated to sample preparation and will consider off-line and on-line extractions; in particular, instrumental designs that have been developed so far for DBS extraction will be detailed. Flow injection analysis and applications will be discussed in section IV. The application of surface analysis mass spectrometry (DESI, paper spray, DART, APTDCI, MALDI, LDTD-APCI, and ICP) to DBS is described in section V, while applications based on separation techniques (e.g., liquid or gas chromatography) are presented in section VI. To conclude this review, the current status of DBS analysis is summarized, and future perspectives are provided.

Development of a novel noncapillary plasma microsampling device for ultra-low volume of blood collection

The desire for serial microsampling in mice has led to extensive research in this field within the pharmaceutical industry. The ability to profile a compound's in vivo properties with less material and fewer mice has obvious advantages. A new device and workflow was developed at the Takeda Oncology site to allow scientists to isolate plasma from very low volumes of mouse blood (as low as 20 μl) collected using standard microsampling techniques. A side-by-side in vitro comparison of plasma concentrations was performed using this new device and conventional sampling methods with commercial and in-house molecules. The plasma concentrations of the molecules tested were very consistent between the conventional sampling techniques and this new device/workflow. In addition, several in-life studies have also been conducted to validate this new technique as a primary PK screening tool at the Takeda Boston. The new device is simple to use and very cost effective with the added benefit that no additional training is needed for the animal technicians and the same centrifuge equipment can be employed. This device can be used for blood volumes ranging from 20 to 100 μl enabling studies not just in rat and dog but more importantly in mice.

Optimization of an automated IS addition system for use in high-throughput quantitative DBS analysis

BACKGROUND

Automated DBS direct elution systems are available that incorporate IS spray modules which, unlike conventional IS addition via the extraction solvent, apply IS prior to DBS samples prior to extraction, allowing analyte and IS to be coextracted.

RESULTS

IS spray system parameters were optimized to identify the conditions that produced the best analytical performance in quantitative bioanalytical assays, without interfering with the integrity of the DBS sample prior to extraction.

CONCLUSION

LC-MS/MS method validations across four representative small molecule assays using the optimized IS spray conditions were demonstrated to produce analytical performance comparable to conventional methods of IS addition, demonstrating that the spray technique is a viable alternative.

DBS direct elution: optimizing performance in high-throughput quantitative LC–MS/MS analysis

Background: Automated DBS direct elution techniques eliminate the manual extraction burden of DBS bioanalysis, offer good quantitative performance, the ability to eliminate hematocrit-based assay bias, and, previous reports have demonstrated that significant increases in assay sensitivity compared with manual DBS extraction are possible. Results: An investigation into elucidating parameters for optimized generic DBS direct elution for high sample throughput quantitative bioanalytical applications is presented for the first time. Generic direct elution conditions were identified that enabled LC–MS/MS assay sensitivity to be maximized while retaining acceptable chromatographic performance. Conclusion: Compared with generic conventional DBS manual extraction, assay sensitivity was demonstrated to be increased up to 33-fold across four representative small molecule compounds, using the recommended direct elution conditions.

Automated high-capacity on-line extraction and bioanalysis of dried blood spot samples using liquid chromatography/high-resolution accurate mass spectrometry

RATIONALE

Pharmacokinetic data to support clinical development of pharmaceuticals are routinely obtained from liquid plasma samples. The plasma samples require frozen shipment and storage and are extracted off-line from the liquid chromatography/tandem mass spectrometry (LC/MS/MS) systems. In contrast, the use of dried blood spot (DBS) sampling is an attractive alternative in part due to its benefits in microsampling as well as simpler sample storage and transport. However, from a practical aspect, sample extraction from DBS cards can be challenging as currently performed. The goal of this report was to integrate automated serial extraction of large numbers of DBS cards with on-line liquid chromatography/high-resolution accurate mass spectrometry (LC/HRAMS) bioanalysis.

METHODS

An automated system for direct DBS extraction coupled to a LC/HRAMS was employed for the quantification of midazolam (MDZ) and α-hydroxymidazolam (α-OHMDZ) in human blood. The target analytes were directly extracted from the DBS cards onto an on-line chromatographic guard column followed by HRAMS detection. No additional sample treatment was required. The automated DBS LC/HRAMS method was developed and validated, based on the measurement at the accurate mass-to-charge ratio of the target analytes to ensure specificity for the assay.

RESULTS

The automated DBS LC/HRAMS method analyzed a DBS sample within 2 min without the need for punching or additional off-line sample treatment. The fully automated analytical method was shown to be sensitive and selective over the concentration range of 5 to 2000 ng/mL. Intra- and inter-day precision and accuracy was less than 15% (less than 20% at the LLOQ). The validated method was successfully applied to measure MDZ and α-OHMDZ in an incurred human sample after a single 7.5 mg dose of MDZ.

CONCLUSIONS

The direct DBS LC/HRAMS method demonstrated successful implementation of automated DBS extraction and bioanalysis for MDZ and α-OHMDZ. This approach has the potential to promote workload reduction and sample throughput increase.

Therapeutic drug monitoring by dried blood spot: progress to date and future directions

This article discusses dried blood spot (DBS) sampling in therapeutic drug monitoring (TDM). The most important advantages of DBS sampling in TDM are the minimally invasive procedure of a finger prick (home sampling), the small volume (children), and the stability of the analyte. Many assays in DBS have been reported in the literature over the previous 5 years. These assays and their analytical techniques are reviewed here. Factors that may influence the accuracy and reproducibility of DBS methods are also discussed. Important issues are the correlation with plasma/serum concentrations and the influence of hematocrit on spot size and recovery. The different substrate materials are considered. DBS sampling can be a valid alternative to conventional venous sampling. However, patient correlation studies are indispensable to prove this. Promising developments are dried plasma spots using membrane and hematocrit correction using the potassium concentration.

Spot them in the spot: analysis of abused substances using dried blood spots

Dried blood spot (DBS) sampling and DBS analysis have increasingly received attention during recent years. Furthermore, a substantial number of DBS methods has recently become available in clinical, forensic and occupational toxicology. In this review, we provide an overview of the different DBS-based methods that have been developed for detecting (markers of) abused substances. These include both legal and illegal drugs belonging to different categories, including cannabinoids, cocaine and metabolites, opioids, benzodiazepines and Z-drugs, amphetamines and analogs, gamma-hydroxybutyric acid, ketamine and novel psychoactive substances such as cathinones. Markers of ethanol consumption and tobacco use are also covered in this review. Since the majority of published methods has shown promising results overall, an interesting role for DBS analysis in diverse toxicological applications can be envisaged. For the distinct applications, we discuss the specific potential and benefits of DBS, the associated limitations and challenges, as well as recent developments and future perspectives.

Alternative strategies for mass spectrometer-based sample dilution of bioanalytical samples, with particular reference to DBS and plasma analysis

Background: The analysis of bioanalytical samples has required a physical dilution of high-concentration samples to bring concentrations into the validated calibration range of an assay. Results: A reversed phase ultra-high performance liquid chromatography–tandem mass spectrometry method for the quantitative analysis of pioglitazone in dried blood spots has been used to partially validate two novel techniques to analyze sample concentrations that lie above a particular calibration range. The first of the two techniques is mass spectrometer signal dilution, which consists of lowering the signal that reaches the detector. The second technique designated isotope signal ratio monitoring looks at [M+2]+1 ions (caused by naturally occurring isotopes) for samples above the upper limit of quantification. Conclusions: The newly developed methods have the potential to simplify the analysis of bioanalytical samples for which previously a physical dilution of the sample was required to bring analytes within the calibration range of an assay.

Clinical experimentation with aerosol antibiotics: current and future methods of administration

Currently almost all antibiotics are administered by the intravenous route. Since several systems and situations require more efficient methods of administration, investigation and experimentation in drug design has produced local treatment modalities. Administration of antibiotics in aerosol form is one of the treatment methods of increasing interest. As the field of drug nanotechnology grows, new molecules have been produced and combined with aerosol production systems. In the current review, we discuss the efficiency of aerosol antibiotic studies along with aerosol production systems. The different parts of the aerosol antibiotic methodology are presented. Additionally, information regarding the drug molecules used is presented and future applications of this method are discussed.

Microsample analyses via DBS: challenges and opportunities

The use of DBS is an appealing approach to employing microsampling techniques for the bioanalysis of samples, as has been demonstrated for the past 50 years in the metabolic screening of metabolites and diseases. In addition to its minimally invasive sample collection procedures and its economical merits, DBS microsampling benefits from the very high sensitivity, selectivity and multianalyte capabilities of LC–MS, which has been especially well demonstrated in newborn screening applications. Only a few microliters of a biological fluid are required for analysis, which also translates to significantly reduced demands on clinical samples from patients or from animals. Recently, the pharmaceutical industry and other arenas have begun to explore the utility and practicality of DBS microsampling. This review discusses the basis for why DBS techniques are likely to be part of the future, as well as offering insights into where these benefits may be realized.

IS addition in bioanalysis of DBS: results from the EBF DBS-microsampling consortium

Background: In the framework of wider exploration of the application of dried blood spots (DBS) in bioanalysis, by the DBS consortium of the European Bioanalytical Forum, one team of five laboratories investigated the merits of the various ways of IS addition prior to LC–MS/MS analysis. A set of 22 pharmaceutical compounds with log P in the range of 0–10 was selected for this purpose. Assessments were made of precision, recovery, and of the effects of prolonged storage. Results: Assay precision was not significantly different for 3 month-aged samples as compared with ‘fresh’ samples stored for 7–22 days. Extraction recovery from 3 month-aged spots decreased for some of the analytes; the most widely employed addition of IS in the extraction solvent does not compensate for recovery in such cases. Conclusion: From the overall results, it is clear that there is no ‘one size fits all’ approach to IS addition in DBS bioanalysis.

State-of-the-art dried blood spot analysis: an overview of recent advances and future trends

Dried blood spots have become a popular method in a variety of micro blood-sampling techniques in the life sciences sector, consequently competing with the field of conventional, invasive blood sampling by venepuncture. Dried blood spots are widely applied in numerous bioanalytical assays and have gained a significant role in the screening of inherited metabolic diseases, in PK and PD modeling; in the treatment and diagnosis of infectious diseases; and in therapeutic drug monitoring. Recent technological developments such as automation, online extraction, mass spectrometric direct analysis and also conventional dried blood spot bioanalysis, as well as future developments in dried blood spot bioanalysis are highlighted and presented in this article.

Hemato-critical issues in quantitative analysis of dried blood spots: challenges and solutions

Dried blood spot (DBS) sampling for quantitative determination of drugs in blood has entered the bioanalytical arena at a fast pace during the last decade, primarily owing to progress in analytical instrumentation. Despite the many advantages associated with this new sampling strategy, several issues remain, of which the hematocrit issue is undoubtedly the most widely discussed challenge, since strongly deviating hematocrit values may significantly impact DBS-based quantitation. In this review, an overview is given of the different aspects of the ‘hematocrit problem’ in quantitative DBS analysis. The different strategies that try to cope with this problem are discussed, along with their potential and limitations. Implementation of some of these strategies in practice may help to overcome this important hurdle in DBS assays, further allowing DBS to become an established part of routine quantitative bioanalysis.

Rapid and simple LC-MS/MS screening of 64 novel psychoactive substances using dried blood spots

The range of novel psychoactive substances (NPS) including phenethylamines, cathinones, piperazines, tryptamines, etc. is continuously growing. Therefore, fast and reliable screening methods for these compounds are essential and needed. The use of dried blood spots (DBS) for a fast straightforward approach helps to simplify and shorten sample preparation significantly. DBS were produced from 10 µl of whole blood and extracted offline with 500 µl methanol followed by evaporation and reconstitution in mobile phase. Reversed-phase chromatographic separation and mass spectrometric detection (RP-LC-MS/MS) was achieved within a run time of 10 min. The screening method was validated by evaluating the following parameters: limit of detection (LOD), matrix effect, selectivity and specificity, extraction efficiency, and short-term and long-term stability. Furthermore, the method was applied to authentic samples and results were compared with those obtained with a validated whole blood method used for routine analysis of NPS. LOD was between 1 and 10 ng/ml. No interference from matrix compounds was observed. The method was proven to be specific and selective for the analytes, although with limitations for 3-FMC/flephedrone and MDDMA/MDEA. Mean extraction efficiency was 84.6 %. All substances were stable in DBS for at least a week when cooled. Cooling was essential for the stability of cathinones. Prepared samples were stable for at least 3 days. Comparison to the validated whole blood method yielded similar results. DBS were shown to be useful in developing a rapid screening method for NPS with simplified sample preparation.

Internal standard application to dried blood spots by spraying: investigation of the internal standard distribution

Background: The scientifically and logistically best way of application of the internal standard (IS) in the analysis of dried blood spots (DBS) analysis is still a matter of debate and investigation. Most commonly the IS is added in the solvent used for extraction of the discs punched from DBS. In this case, the recovery of the non-extracted IS is complete while the recovery of the analyte extracted from DBS is different from the IS. Results: An alternative way for addition of the IS was investigated. A homogeneous distribution and absorption of the test compound across the spots was demonstrated by spraying a solution of a radiolabeled test compound (mimicking an IS solution) onto DBS. Conclusion: This spray-on technique is convenient and easily automatable. Spraying of the solution was rapid, precise and reproducible, and therefore seems to be suitable for routine analysis of DBS by offline and online extraction.

Capillary microsampling in the regulatory environment: validation and use of bioanalytical capillary microsampling methods

Capillary microsampling (CMS) has recently been introduced as a response to the demands for more ethical use of laboratory animals according to the 3R principles. In CMS, an exact volume of the blood, plasma or other biofluid is collected in a capillary from which it is washed out, resulting in a diluted sample that can be handled using the existing equipment in the bioanalytical laboratory. CMS differs from traditional large volume sampling as the microsample is diluted before further handling and analysis, and reanalysis is performed using the diluted sample. This has some implications for the validation and this report is an attempt to clarify how to validate and use CMS methods in a regulatory environment. CMS also shows some distinct new opportunities: labile analytes can be immediately stabilized at sample collection and the addition of the internal standard to the whole sample can improve analytical performance. The experiences from 5 years use of CMS of plasma and blood for determination of drug exposure in animal studies are reviewed.