Portable Electrochemical Surface-Enhanced Raman Spectroscopy System for Routine Spectroelectrochemical Analysis

Portable Copper-Based Electrochemical SERS Sensor for Point-of-Care Testing of Paraquat and Diquat by On-Site Electrostatic Preconcentration

With the advent of portable Raman spectrometers, the deployment of surface-enhanced Raman spectroscopy (SERS) in point-of-care testing (POCT) has been initiated. Within any analytical framework employing SERS, the acuity and selectivity inherent to the SERS substrate are of paramount importance. In this article, we utilize in situ electrochemical passivation technology to fabricate CuI passivation film, which serves as a flexible copper-based SERS substrate. Furthermore, portable electrochemical SERS (EC-SERS) sensors were prepared by combining this with laser direct writing technology. The detection signal was amplified using electrostatic preconcentration technology, showcasing impressive sensitivity, selectivity, and stability in pesticide detection. The detected concentrations of paraquat and diquat in tea reached as low as 3.36 and 2.43 μg/kg, respectively. Furthermore, the application of electrostatic preconcentration facilitated selective target molecule aggregation on the SERS sensor, markedly increasing Raman signal strength and enabling single-molecule detection. This research introduces an innovative POCT method for pesticides, promising to advance environmental monitoring's analytical capabilities.

Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Advances in electrochemical-optical dual-mode biosensors for detection of environmental pathogens

Electrochemical techniques are commonly used to analyze and screen various environmental pathogens. When used in conjunction with other optical recognition methods, it can extend the sensing range, lower the detection limit, and offer mutual validation. Nowadays, electrochemical-optical dual-mode biosensors have ensured the accuracy of test results by integrating two signals into one, indicating their potential use in primary food safety quantitative assays and screening tests. Particularly, visible optical signals from electrochemical/colorimetric dual-mode biosensors could meet the demand for real-time screening of microbial pathogens. While electrochemical-optical dual-mode probes have been receiving increasing attention, there is limited emphasis on the design approaches for sensors intended for microbial pathogens. Here, we review the recent progress in the merging of optical and electrochemical techniques, including fluorescence, colorimetry, surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). This study particularly emphasizes the reporting of various sensing performances, including sensing principles, types, cutting-edge design approaches, and applications. Finally, some concerns and upcoming advancements in dual-mode probes are briefly outlined.

Photo-induced enhanced Raman spectroscopy as a probe for photocatalytic surfaces

Photo-induced enhanced Raman spectroscopy (PIERS) has emerged as a highly sensitive surface-enhanced Raman spectroscopy (SERS) technique for the detection of ultra-low concentrations of organic molecules. The PIERS mechanism has been largely attributed to UV-induced formation of surface oxygen vacancies (Vo) in semiconductor materials, although alternative interpretations have been suggested. Very recently, PIERS has been proposed as a surface probe for photocatalytic materials, following Vo formation and healing kinetics. This work establishes comparison between PIERS and Vo-induced SERS approaches in defected noble-metal-free titanium dioxide (TiO2-x) films to further confirm the role of Vo in PIERS. Upon application of three post-treatment methods (namely UV-induction, vacuum annealing and argon etching), correlation of Vo kinetics and distribution could be established. A proposed mechanism and further discussion on PIERS as a probe to explore photocatalytic materials are also presented. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Review on combining surface-enhanced Raman spectroscopy and electrochemistry for analytical applications

The discovery of surface enhanced Raman scattering (SERS) from an electrochemical (EC)-SERS experiment is known as a historic breakthrough. Five decades have passed and Raman spectroelectrochemistry (SEC) has developed into a common characterization tool that provides information about the electrode-electrolyte interface. Recently, this technique has been successfully explored for analytical purposes. EC was found to highly improve the performances of SERS sensors, providing, among others, controlled adsorption of analytes and increased reproducibility. In this review, we highlight the potential of EC-SERS sensors to be implemented for point-of-need (PON) analyses as miniaturized devices, and their ability to revolutionize fields like quality control, diagnosis or environmental and food safety. Important developments have been achieved in Raman spectroelectrochemistry, which now represents a promising alternative to conventional analytical methods and interests more and more researchers. The studies included in this review open endless possibilities for real-life EC-SERS analytical applications.

Rapid Determination of the 'Legal Highs' 4-MMC and 4-MEC by Spectroelectrochemistry: Simultaneous Cyclic Voltammetry and In Situ Surface-Enhanced Raman Spectroscopy

The synthetic cathinones mephedrone (4-MMC) and 4-methylethcathinone (4-MEC) are two designer drugs that represent the rise and fall effect of this drug category within the stimulants market and are still available in several countries around the world. As a result, the qualitative and quantitative determination of 'legal highs', and their mixtures, are of great interest. This work explores for the first time the spectroelectrochemical response of these substances by coupling cyclic voltammetry (CV) with Raman spectroscopy in a portable instrument. It was found that the stimulants exhibit a voltammetric response on a gold screen-printed electrode while the surface is simultaneously electro-activated to achieve a periodic surface-enhanced Raman spectroscopy (SERS) substrate with high reproducibility. The proposed method enables a rapid and reliable determination in which both substances can be selectively analyzed through the oxidation waves of the molecules and the characteristic bands of the electrochemical SERS (EC-SERS) spectra. The feasibility and applicability of the method were assessed in simulated seized drug samples and spiked synthetic urine. This time-resolved spectroelectrochemical technique provides a cost-effective and user-friendly tool for onsite screening of synthetic stimulants in matrices with low concentration analytes for forensic applications.

Electrochemical surface-enhanced Raman spectroscopy (EC-SERS): a tool for the identification of polyphenolic components in natural lake pigments

The identification of natural organic pigments is important for the conservation, preservation, and historical interpretation of artwork. Due to the fugitive nature of the natural dye components in pigments, their analysis can be complicated by issues such as low concentration and sample complexity. In addition, these pigments are exceedingly diverse, and often represent complex mixtures which are difficult to analyse without a separation step. A particularly challenging class of dyes is the natural yellow polyphenols (i.e. quercetin, rhamnetin, emodin, etc.). Several techniques have been used successfully for the identification of phenolic compounds in a complex mixture, but the majority of these methods require advanced instrumentation and one or more separation steps. In addition, these methods may lack the sensitivity needed to detect minute amounts of pigment remaining in faded artwork. As a result, there is a need for innovative methods of analysis which can be applied to the interpretation of artworks containing natural dyes. In this work, cost-effective screen printed electrodes (SPEs) modified with silver nanoparticles (AgNP) were used to amplify the electrochemical SERS response of phenolic compounds. In particular, application of a voltage to the SERS substrate allows for a fine-tuning of the SERS signal, and was successfully used to separately characterize dye components in two natural yellow lake pigments, Reseda Lake and Stil de Grain. To our knowledge, this work represents the first electrochemical surface-enhanced Raman spectroscopy (EC-SERS) study of polyphenolic dye mixtures, and is the first application of EC-SERS for natural pigment analysis. This work establishes EC-SERS as a useful technique for the identification of complex natural dyes which may find potential use in the cultural heritage realm.

Wireless Battery-Free Generation of Electric Fields on One-Dimensional Asymmetric Au/ZnO Nanorods for Enhanced Raman Sensing

Wearable electronics have great potential in enhancing health monitoring, disease diagnosis, and environmental pollution tracking. Development of wearable surface-enhanced Raman spectroscopy (SERS) substrates with target sampling and sensitive sensing functions is a promising way to obtain physical and chemical information. This study describes a facile and effective approach for constructing an electrically modulated SERS (E-SERS) substrate as a wearable and wireless battery-free substrate with improved sensitivity. By integrating zinc oxide nanorods (ZnO NRs) with asymmetric gold decoration, controllable enhanced piezoelectric potentials were achieved using magnets to supply the adjustable pressure force. Owing to spatially oriented electron-hole pair separation on the asymmetric NRs, the local hotspot intensity at the Au tips is significantly improved, increasing the SERS signal by 6.7 times. This mechanism was quantitatively analyzed using Raman spectra by in situ formation of Prussian blue (PB). As a proof-of-concept, the E-SERS substrate was further used as a wearable flexible device to directly collect the sweat on a runner's skin and then monitor the lactate status of the runner. This study offers new insight into the development of E-SERS substrates and provides new design options for the construction of wearable sampling and sensing devices for the noninvasive monitoring of metabolites in healthcare and biomedical fields.

In situ food-borne pathogen sensors in a nanoconfined space by surface enhanced Raman scattering

The incidence of disease arising from food-borne pathogens is increasing continuously and has become a global public health problem. Rapid and accurate identification of food-borne pathogens is essential for adopting disease intervention strategies and controlling the spread of epidemics. Surface-enhanced Raman spectroscopy (SERS) has attracted increasing interest due to the attractive features including simplicity, rapid measurement, and high sensitivity. It can be used for rapid in situ sensing of single and multicomponent samples within the nanostructure-based confined space by providing molecular fingerprint information and has been demonstrated to be an effective detection strategy for pathogens. This article aims to review the application of SERS to the rapid sensing of food-borne pathogens in food matrices. The mechanisms and advantages of SERS, and detection strategies are briefly discussed. The latest progress on the use of SERS for rapid detection of food-borne bacteria and viruses is considered, including both the labeled and label-free detection strategies. In closing, according to the current situation regarding detection of food-borne pathogens, the review highlights the challenges faced by SERS and the prospects for new applications in food safety.

Graphical abstract

Patterned Superhydrophobic SERS Substrates for Sample Pre-Concentration and Demonstration of Its Utility through Monitoring of Inhibitory Effects of Paraoxon and Carbaryl on AChE

We describe a patterned surface-enhanced Raman spectroscopy (SERS) substrate with the ability to pre-concentrate target molecules. A surface-adsorbed nanosphere monolayer can serve two different functions. First, it can be made into a SERS platform when covered by silver. Alternatively, it can be fashioned into a superhydrophobic surface when coated with a hydrophobic molecular species such as decyltrimethoxy silane (DCTMS). Thus, if silver is patterned onto a latter type of substrate, a SERS spot surrounded by a superhydrophobic surface can be prepared. When an aqueous sample is placed on it and allowed to dry, target molecules in the sample become pre-concentrated. We demonstrate the utility of the patterned SERS substrate by evaluating the effects of inhibitors to acetylcholinesterase (AChE). AChE is a popular target for drugs and pesticides because it plays a critical role in nerve signal transduction. We monitored the enzymatic activity of AChE through the SERS spectrum of thiocholine (TC), the end product from acetylthiocholine (ATC). Inhibitory effects of paraoxon and carbaryl on AChE were evaluated from the TC peak intensity. We show that the patterned SERS substrate can reduce both the necessary volumes and concentrations of the enzyme and substrate by a few orders of magnitude in comparison to a non-patterned SERS substrate and the conventional colorimetric method.

Spectroelectrochemical and computational studies of tetrahydrocannabinol (THC) and carboxy-tetrahydrocannabinol (THC-COOH)

Electrochemical SERS allows for the rapid detection of both THC and THC-COOH in bodily fluid matrices without interferences from matrix species, paving the way to a point-of-need tool for cannabinoid detection.

Spectroelectrochemistry, the future of visualizing electrode processes by hyphenating electrochemistry with spectroscopic techniques

Reviewing the future of electrochemistry combined with infrared, Raman, and nuclear magnetic resonance spectroscopy as well as mass spectrometry.

Smart Electrochemical Portable Tools for Cultural Heritage Analysis: A Review

Protecting Cultural Heritage (CH) from corrosion and other environmental damages, mainly involving metallic or organic layers contained in artwork, represents a major challenge for conservation scientists. Electrochemical techniques provide useful information about the deterioration effects of metallic coatings and organic layers. Recently, Electrochemical Impedance Spectroscopy (EIS) has been successfully applied in the study of metallic corrosion. However, EIS has not succeeded in becoming a routine technique, due to problems regarding both instrumental apparatus (which is not ideal for in situ analysis, especially with previous cell configurations), and the difficulty with data processing. At the same time, new portable electrochemical sensors, immunosensors, and biosensors have successfully made a scientific impact, mainly with in situ diagnosis of organic components contained in CH objects. For this purpose, this review presents two sections: the first describes the analytical optimization of impedance electrochemical cell geometries that are suitable for in situ metal-coating investigation; the second reports on the assembly of small electrochemical sensors, immunosensors, and biosensors, which useful for in situ organic layer characterization. This overview summarizes the state of the art regarding the application of electrochemical techniques and small electrochemical devices as alternative tools for the understanding of CH.

Melamine Detection in Food matrices employing Chicken Antibody (IgY): A Comparison between Colorimetric and Chemiluminescent Methods

Background:

Melamine, contains 67% nitrogen by mass, and is adulterated in foods to uplift false protein. There is an urgent requirement to develop fast screening techniques for monitoring melamine in foods.

Objective:

To develop rapid, high throughput detection techniques for melamine in the food matrix.

Methods:

IgY antibodies were developed against melamine in the hen, isolated and used for detection of melamine. The detection by colorimetric and chemiluminescent methods was compared.

Results:

The detection range for melamine was 1 ng-25 µg by the colorimetric method and 10 fg/mL-25 ng/mL by the chemiluminescent method. There was a very low matrix effect, where the recovery was 86 to 106 % by colorimetric method and 71 to 98 % by the chemiluminescent method.

Conclusion:

Both colorimetric and chemiluminescent methods could be employed for the fast and consistent melamine detection in the food matrix.

Determination of uric acid in synthetic urine by using electrochemical surface oxidation enhanced Raman scattering

In this work, a new and easy methodology to determine uric acid in relevant samples using Raman spectroelectrochemistry is presented. The spectroelectrochemistry experiment is based on the in-situ formation of a suitable substrate that enables the enhancement of the Raman signal of an analyte during the oxidation stage of a silver electrode. This phenomenon is known as electrochemical surface oxidation enhanced Raman scattering (EC-SOERS) and has proved to be useful in quantitative analysis using disposable screen printed electrodes. The successful combination of EC-SOERS with PARAFAC analysis allows the determination of uric acid in a relevant complex sample avoiding the use of standard addition method and without using a baseline correction, which simplifies the application of such methodology in routine analysis.

Facile chemical routes to mesoporous silver substrates for SERS analysis

Mesoporous silver nanoparticles were easily synthesized through the bulk reduction of crystalline silver(I) oxide and used for the preparation of highly porous surface-enhanced Raman scattering (SERS)-active substrates. An analogous procedure was successfully performed for the production of mesoporous silver films by chemical reduction of oxidized silver films. The sponge-like silver blocks with high surface area and the in-situ-prepared mesoporous silver films are efficient as both analyte adsorbents and Raman signal enhancement mediators. The efficiency of silver reduction was characterized by X-ray diffraction and X-ray photoelectron spectroscopy. The developed substrates were applied for SERS detection of rhodamine 6G (enhancement factor of about 1-5 × 10⁵) and an anti-ischemic mildronate drug (meldonium; enhancement factor of ≈10²) that is known for its ability to increase the endurance performance of athletes.

Development of an electrochemical surface-enhanced Raman spectroscopy (EC-SERS) fabric-based plasmonic sensor for point-of-care diagnostics

A plasmonic fabric-based electrode has been developed for wearable EC-SERS sensing for point-of-care applications.

Electrochemical surface-enhanced Raman spectroscopy (EC-SERS) study of the interaction between protein aggregates and biomimetic membranes

EC-SERS is used for the first time to characterize protein aggregate–biomembrane interactions.

Identification and Quantification of Intravenous Therapy Drugs Using Normal Raman Spectroscopy and Electrochemical Surface-Enhanced Raman Spectroscopy

Errors in intravenous (IV) drug therapies can cause human harm and even death. There are limited label-free methods that can sensitively monitor the identity and quantity of the drug being administered. Normal Raman spectroscopy (NRS) provides a modestly sensitive, label-free, and completely noninvasive means of IV drug sensing. In the case that the analyte cannot be detected within its clinical range with Raman, a label-free surface-enhanced Raman spectroscopy (SERS) approach can be implemented to detect the analyte of interest. In this work, we demonstrate two individual cases where we use NRS and electrochemical SERS (EC-SERS) to detect IV therapy analytes within their clinically relevant ranges. We implement NRS to detect gentamicin, a commonly IV-administered antibiotic and EC-SERS to detect dobutamine, a drug commonly administered after heart surgery. In particular, dobutamine detection with EC-SERS was found to have a limit of detection 4 orders of magnitude below its clinical range, highlighting the excellent sensitivity of SERS. We also demonstrate the use of hand-held Raman instrumentation for NRS and EC-SERS, showing that Raman is a highly sensitive technique that is readily applicable in a clinical setting.

Nanomaterials-based biosensors for detection of microorganisms and microbial toxins

Detection of microorganisms and microbial toxins is important for health and safety. Due to their unique physical and chemical properties, nanomaterials have been extensively used to develop biosensors for rapid detection of microorganisms with microbial cells and toxins as target analytes. In this paper, the design principles of nanomaterials-based biosensors for four selected analyte categories (bacteria cells, toxins, mycotoxins, and protozoa cells), closely associated with the target analytes' properties is reviewed. Five signal transducing methods that are less equipment intensive (colorimetric, fluorimetric, surface enhanced Raman scattering, electrochemical, and magnetic relaxometry methods) is described and compared for their sensory performance (in term oflimit of detection, dynamic range, and response time) for all analyte categories. In the end, the suitability of these five sensing principles for on-site or field applications is discussed. With a comprehensive coverage of nanomaterials, design principles, sensing principles, and assessment on the sensory performance and suitability for on-site application, this review offers valuable insight and perspective for designing suitable nanomaterials-based microorganism biosensors for a given application.

Development of an electrochemical surface-enhanced Raman spectroscopy (EC-SERS) aptasensor for direct detection of DNA hybridization

Rapid detection of disease biomarkers at the patient point-of-care is essential to timely and effective treatment. The research described herein focuses on the development of an electrochemical surface-enhanced Raman spectroscopy (EC-SERS) DNA aptasensor capable of direct detection of tuberculosis (TB) DNA. Specifically, a plausible DNA biomarker present in TB patient urine was chosen as the model target for detection. Cost-effective screen printed electrodes (SPEs) modified with silver nanoparticles (AgNP) were used as the aptasensor platform, onto which the aptamer specific for the target DNA was immobilized. Direct detection of the target DNA was demonstrated through the appearance of SERS peaks characteristic for adenine, present only in the target strand. Modulation of the applied potential allowed for a sizeable increase in the observed SERS response and the use of thiol back-filling prevented non-specific adsorption of non-target DNA. To our knowledge, this work represents the first EC-SERS study of an aptasensor for the direct, label-free detection of DNA hybridization. Such a technology paves the way for rapid detection of disease biomarkers at the patient point-of-care.

Shell-isolated nanoparticle-enhanced Raman spectroscopy study of the adsorption behaviour of DNA bases on Au(111) electrode surfaces

In situ EC-SHINERS is used to investigate the adsorption behaviour of DNA bases on atomically flat Au(111) electrode surfaces.

Lightweight Raman spectroscope using time-correlated photon-counting detection

Raman spectroscopy is an important tool in understanding chemical components of various materials. However, the excessive weight and energy consumption of a conventional CCD-based Raman spectrometer forbids its applications under extreme conditions, including unmanned aircraft vehicles (UAVs) and Mars/Moon rovers. In this article, we present a highly sensitive, shot-noise-limited, and ruggedized Raman signal acquisition using a time-correlated photon-counting system. Compared with conventional Raman spectrometers, over 95% weight, 65% energy consumption, and 70% cost could be removed through this design. This technique allows space- and UAV-based Raman spectrometers to robustly perform hyperspectral Raman acquisitions without excessive energy consumption.

Direct writing electrodes using a ball pen for paper-based point-of-care testing

A simple strategy to fabricate paper-based electrochemical devices has been developed by directly writing using a pressure-assisted ball pen.

SERS optrode as a “fishing rod” to direct pre-concentrate analytes from superhydrophobic surfaces

SERS optrodes were used to “fish” aqueous drops from superhydrophobic surfaces, which led to an improvement of 2–3 orders of magnitude in sensitivity. 20 pg of the pesticide triazophos was detected by this method.

Simple SERS substrates: powerful, portable, and full of potential

Surface enhanced Raman spectroscopy (SERS) is a powerful spectroscopic technique capable of detecting trace amounts of chemicals and identifying them based on their unique vibrational characteristics. While there are many complex methods for fabricating SERS substrates, there has been a recent shift towards the development of simple, low cost fabrication methods that can be performed in most labs or even in the field. The potential of SERS for widespread use will likely be realized only with development of cheaper, simpler methods. In this Perspective article we briefly review several of the more popular methods for SERS substrate fabrication, discuss the characteristics of simple SERS substrates, and examine several methods for producing simple SERS substrates. We highlight potential applications and future directions for simple SERS substrates, focusing on highly SERS active three-dimensional nanostructures fabricated by inkjet and screen printing and galvanic displacement for portable SERS analysis - an area that we believe has exciting potential for future research and commercialization.