Capillary Electrophoresis

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Electromagnetic Forces and Torques: From Dielectrophoresis to Optical Tweezers

Electromagnetic forces and torques enable many key technologies, including optical tweezers or dielectrophoresis. Interestingly, both techniques rely on the same physical process: the interaction of an oscillating electric field with a particle of matter. This work provides a unified framework to understand this interaction both when considering fields oscillating at low frequencies─dielectrophoresis─and high frequencies─optical tweezers. We draw useful parallels between these two techniques, discuss the different and often unstated assumptions they are based upon, and illustrate key applications in the fields of physical and analytical chemistry, biosensing, and colloidal science.

Determination of α- and β-acids in hops by liquid chromatography or electromigration techniques: A critical review

Hop plays an essential role in brewing beer and its study and analysis is of paramount importance. - and -acids are considered two of the most important hop components. While -acids are associated with the bitter flavor, -acids have antimicrobial effects. This work aims to critically review the published analytical methods for - and -acids determination in hops employing separation methods in liquid medium: liquid chromatography (LC) and capillary electrophoresis (CE). The types of hop samples, the optimized protocols to extract the hop acids, and the main instrumental conditions for both LC and CE techniques are highlighted and discussed. Specific and critical aspects of the - and β-acids separation by LC and CE and some challenges in this field are raised. Several key aspects discussed in this review may be of practical importance for brewers, whether in the microbrewery or industry and for researchers in the brewing field.

Human tear fluid analysis for clinical applications: progress and prospects

Introduction: Human blood and saliva are increasingly under investigation for the detection of biomarkers for early diagnosis of non-communicable (e.g.cancers) and communicable diseases like COVID-19. Exploring the potential application of human tears, an easily accessible body fluid, for the diagnosis of various diseases is the need of the hour.Areas covered: This review deals with a comprehensive account of applications of tear analysis using different techniques, their comparison and overall progress achieved till now. The techniques used for tear fluid analysis are HPLC/UPLC/SDS-PAGE, CE, etc., together with ELISA, Mass Spectrometry, etc. But, with advances in instrumentation and data processing methods, it has become easy to couple the various separation methods with highly sensitive optical techniques for the analysis of body fluids.Expert opinion: Tear analysis can provide valuable information about the health condition of the eyes since it contains several molecular constituents, and their relative concentrations may alter under abnormal conditions. Tear analysis has the advantage that it is totally non-invasive. This study recommends tear fluid as a reliable clinical sample to be probed by highly sensitive optical techniques to diagnose different health conditions, with special emphasis on eye diseases.

Capillary electrochromatography-mass spectrometry of kynurenine pathway metabolites

Few articles are reported for the simultaneous separation and sensitive detection of the kynurenine pathway (KP) metabolites. This work describes a capillary electrochromatography-mass spectrometry (CEC-MS) method using acrylamido-2-methyl-1-propanesulfonic acid (AMPS) functionalized stationary phase. The AMPS column was prepared by first performing silanization of bare silica with gamma-maps, followed by polymerization with AMPS. The CEC-MS/MS methods were established for six upstream and three downstream KP metabolites. The simultaneous separation of all nine KP metabolites is achieved without derivatization for the first time in the open literature. Numerous parameters such as pH and the concentration of background electrolyte, the concentration of the polymerizable AMPS monomer, column length, field strength, and internal pressure were all tested to optimize the separation of multiple KP metabolites. A baseline separation of six upstream metabolites, namely tryptophan (TRP), kynurenine (KYN), 3-hydroxykynurenine (HKYN), kynurenic acid (KA), anthranilic acid (AA), and xanthurenic acid (XA), was possible at pH 9.25 within 26 min. Separation of six downstream and related metabolites, namely: tryptamine (TRPM), hydroxy‑tryptophan (HTRP), hydroxyindole-3 acetic acid (HIAA), 3-hydroxyanthranilic acid (3-HAA), picolinic acid (PA), and quinolinic acid (QA), was achieved at pH 9.75 in 30 min. However, the challenging simultaneous separation of all nine KP metabolites was only accomplished by increasing the column length and simultaneous application of internal pressure and voltage in 114 min. Quantitation of KP metabolites in commercial human plasma was carried out, and endogenous concentration of five KP metabolites was validated. The experimental limit of quantitation ranges from 100 to 10,000 nM (S/N = 8-832, respectively), whereas the experimental limit of detection ranges from 31 to 1000 nM (S/N = 2-16, respectively). Levels of five major KP metabolites, namely TRP, KYN, KA, AA, and QA, and their ratios in patient plasma samples previously screened for inflammatory biomarkers [C-reactive protein (CRP) and tumor necrosis factor-alpha (TNF-α)] was measured. Pairs of the level of metabolites with significant positive correlation were statistically evaluated.

Electrospray ionization stability and concentration sensitivity in capillary electrophoresis-mass spectrometry using a flow-through microvial interface

Concentration sensitivity is a key performance indicator for analytical techniques including for capillary electrophoresis-mass spectrometry (CE-MS) with electrospray ionization (ESI). In this study, a flow-through microvial interface was used to couple CE with MS and improve the ESI stability and detection sensitivity. By infusing a peptide mixture through the interface into an MS detector at a typical flow rate for CE-MS analysis, the spatial region near the interface was mapped for MS signal intensity. When the sprayer tip was within a 6 × 6.5 × 5 mm region in front of the MS inlet, the ESI was stable with no significant loss of signal intensity for ions with m/z 239. Finite element simulations showed that the average electric field strength at the emitter tip did not change significantly with minor changes in emitter tip location. Experiments were conducted with four different mass spectrometer platforms coupled to CE via the flow-through microvial interface. Key performance indicators, that is, limit of detection (LOD) and linearity of calibration curves were measured for nine amino acids and five peptides. Inter- and intraday reproducibility were also tested. The results were shown to be suitable for quantification when internal standards were used.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Ultrasensitive determination of organotin compounds in plastic food packaging and edible oils by sheathless capillary electrophoresis-electrospray ionization-mass spectrometry

The determination of trace-amount organotins in plastic food packaging materials is of great significance in food safety. However, due to the complexity of organotins and sample treatment processes, it is still a challenging task. Here, we report a method for the sensitive and simultaneous determination of organotins in plastic food packaging materials and edible oils, by utilizing sheathless capillary electrophoresis-electrospray ionization-mass spectrometry. The method of sample pretreatment with ultrasonic extraction and solid phase extraction is used to eliminate interference. The results showed low limits of detection (LODs) of 2 pg mL^-1-50 pg mL^-1 and excellent inter/intra-day repeatability. Good average recoveries in the range of 80.27% to 108.52% were obtained at three spiked concentrations, with a relative standard deviation less than 8.71%. The successful simultaneous determination of the target analytes will pave the way for further assessment of contamination and migration behaviour of organotins from packaging materials to food, which is of great significance for evaluating and controlling food safety.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with β-cyclodextrin and poly(glycidyl methacrylate) nanoparticles

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-β-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-β-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

Investigation of maltodextrin-based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium-L-arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin-based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris-H₃ PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium-L-arginine. In addition, the chiral configuration of tetramethylammonium-L-arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.

Alternate injections coupled with flow-gated capillary electrophoresis for rapid and accurate quantitative analysis of urine samples

Capillary electrophoresis (CE) is a powerful separation technique with advantages over HPLC in terms of separation efficiency, speed, and cost. However, CE suffers in poor reproducibility in quantitative chemical analysis, which is one of major drawbacks preventing its widespread use in routine analytical laboratories. Here we report a novel strategy to enhance the quantitative capability of flow-gated CE. The platform integrated dual flow branches to respectively supply a sample and its standard additions that were then alternately injected into a single capillary for rapid separations (typically 20-90 s). A micro-fabricated switch was used to enable the alternate injections. It was assumed that the analytical system maintained constant conditions during neighboring injections that served as external self-standards for quantitation. This strategy was expected to reduce uncertainties caused by the fluctuation in capillary conditions and the drift of detection systems. Experimental results demonstrated that the dual-branch flow-gated CE coupled with alternate injections significantly improved the reproducibility with respect to peak height ratios under deliberate variations in injection volumes, separation voltages, optical focusing, and laser power; and thus the interday precision was ensured. To demonstrate its applicability, cyanide and amino acids in human urine were quantified rapidly with the one-point standard addition method after fluorogenic derivatization with naphthalene-2,3-dicarboxaldehyde (NDA), and the measurement accuracy was validated by determining the recovery of standard cyanide added to a urinary matrix. This strategy would be valuable to enable the quantitative capability of flow-gated CE in the measurements of a broad range of analytes, especially those lacking suited internal standards.

Electrical Chips for Biological Point-of-Care Detection

As the future of health care diagnostics moves toward more portable and personalized techniques, there is immense potential to harness the power of electrical signals for biological sensing and diagnostic applications at the point of care. Electrical biochips can be used to both manipulate and sense biological entities, as they can have several inherent advantages, including on-chip sample preparation, label-free detection, reduced cost and complexity, decreased sample volumes, increased portability, and large-scale multiplexing. The advantages of fully integrated electrical biochip platforms are particularly attractive for point-of-care systems. This review summarizes these electrical lab-on-a-chip technologies and highlights opportunities to accelerate the transition from academic publications to commercial success.

Recent Advances in the Determination of Pesticides in Environmental Samples by Capillary Electrophoresis

Nowadays, owing to the increasing population and the attempts to satisfy its needs, pesticides are widely applied to control the quantity and quality of agricultural products. However, the presence of pesticide residues and their metabolites in environmental samples is hazardous to the health of humans and all other living organisms. Thus, monitoring these compounds is extremely important to ensure that only permitted levels of pesticide are consumed. To this end, fast, reliable, and environmentally friendly methods that can accurately analyze dilute, complex samples containing both parent substances and their metabolites are required. Focusing primarily on research published since 2010, this review summarizes the use of various sample pretreatment techniques to extract pesticides from various matrices, combined with on-line preconcentration strategies for sensitivity improvement, and subsequent capillary electrophoresis analysis.

Improvement of Mitochondria Extract from Saccharomyces cerevisiae Characterization in Shotgun Proteomics Using Sheathless Capillary Electrophoresis Coupled to Tandem Mass Spectrometry

In this work, we describe the characterization of a quantity-limited sample (100 ng) of yeast mitochondria by shotgun bottom-up proteomics. Sample characterization was carried out by sheathless capillary electrophoresis, equipped with a high sensitivity porous tip and coupled to tandem mass spectrometry (CESI-MS-MS) and concomitantly with a state-of-art nano flow liquid chromatography coupled to a similar mass spectrometry (MS) system (nanoLC-MS-MS). With single injections, both nanoLC-MS-MS and CESI-MS-MS 60 min-long separation experiments allowed us to identify 271 proteins (976 unique peptides) and 300 proteins (1,765 unique peptides) respectively, demonstrating a significant specificity and complementarity in identification depending on the physicochemical separation employed. Such complementary, maximizing the number of analytes detected, presents a powerful tool to deepen a biological sample's proteomic characterization. A comprehensive study of the specificity provided by each separating technique was also performed using the different properties of the identified peptides: molecular weight, mass-to-charge ratio (m/z), isoelectric point (pI), sequence coverage or MS-MS spectral quality enabled to determine the contribution of each separation. For example, CESI-MS-MS enables to identify larger peptides and eases the detection of those having extreme pI without impairing spectral quality. The addition of peptides, and therefore proteins identified by both techniques allowed us to increase significantly the sequence coverages and then the confidence of characterization. In this study, we also demonstrated that the two yeast enolase isoenzymes were both characterized in the CESI-MS-MS data set. The observation of discriminant proteotypic peptides is facilitated when a high number of precursors with high-quality MS-MS spectra are generated.

Non-Equilibrium Capillary Electrophoresis of Equilibrium Mixtures-Based Affinity Separation and Selective Enrichment of a Long-Length DNA Aptamer

Non-equilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) is a kinetic capillary electrophoresis method used for the affinity analysis of DNA binding to proteins or ligands as well as a rapid selection of DNA aptamers. However, long DNA strands (100-mer or more) are generally difficult to analyse by this method owing to their poor peak separation. Herein, we report optimized conditions (use of a neutral phosphate buffer with an ionic strength of 0.074 as a binding buffer and use of an 80-cm fused silica capillary with a 75-μm internal diameter) for the peak separation of a 100-mer thrombin-binding DNA aptamer-target complex and its consequent enrichment using the NECEEM-based capillary electrophoresis–systematic evolution of ligands by exponential enrichment (CE-SELEX) method.

Nanomaterials in consumer products: a challenging analytical problem

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumer's protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

A pressure-driven capillary electrophoretic system with injection valve sampling

This work demonstrated the feasibility of a pressure-driven flow in place of electroosmotic flow in capillary electrophoresis analysis to improve the reproducibility and efficiency, thus simplifying the operational procedure.

Capillary and microchip electrophoretic analysis of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants which can reach the environment and food in different ways. Because of their high toxicity, two international regulatory institutions, the US Environmental Protection Agency and the European Food Safety Authority, have classified PAHs as priority pollutants, generating an important demand for the detection and identification of PAHs. Thus, sensitive, fast, and cheap methods for the analysis of PAHs in environmental and food samples are urgently needed. Within this context, electrophoresis, in capillary or microchip format, displays attractive features. This review presents and critically discusses the published literature on the different approaches to capillary and microchip electrophoresis analysis of PAHs.

Capillary electrophoresis/inductively-coupled plasma-mass spectrometry: development and optimization of a high resolution analytical tool for the size-based characterization of nanomaterials in dietary supplements

We report the development and optimization of a system consisting of capillary electrophoresis (CE) interfaced with inductively coupled plasma mass spectrometry (ICPMS) for rapid and high resolution speciation and characterization of metallic (e.g., gold, platinum, and palladium) nanoparticles in a dietary supplement. Multiple factors, including surfactant type and concentration, pH of running buffer, and applied voltage, were investigated to optimize the separation conditions. It was found that by using the anionic surfactant sodium dodecyl benzenesulfonate (SDBS) in the running buffer the separation resolution was significantly improved, allowing for easy distinction of adjacent size fractions in a gold nanoparticle mixture with very small size differences (e.g., 5, 15, 20, and 30 nm). The type and concentration of the surfactant was found to be critical in obtaining sufficient separation while applied voltage and pH values of the running buffers largely affected the elution times by varying the electroosmotic flow. Quantum dots were used as mobility markers to eliminate the run-to-run variation. The diameters of the nanoparticles followed a linear relationship with their relative electrophoretic mobility, and size information on unknown samples could be extrapolated from a standard curve. The accuracy and precision of this method was confirmed using 10 and 30 nm gold nanoparticle standard reference materials. Furthermore, the method was successfully applied to the analysis of commercially available metallic nanoparticle-based dietary supplements, as evidenced by good agreement between the particle sizes calculated by CE/ICPMS and transmission electron microscopy (TEM).

Advance of CE and CEC in phytochemical analysis (2012–2013)

This article presents an overview of the advance of CE and CEC in phytochemical analysis, based on the literature not mentioned in our previous review papers [Chen, X. J., Zhao, J., Wang, Y. T., Huang, L. Q., Li, S. P., Electrophoresis 2012, 33, 168–179], mainly covering the years 2012–2013. In this article, attention is paid to online preconcentration, rapid separation, and sensitive detection. Selected examples illustrate the applicability of CE and CEC in biomedical, pharmaceutical, environmental, and food analysis. Finally, some general conclusions and future perspectives are given.