Ultrasensitive Electrochemical Detection of Nucleic Acids by Template Enhanced Hybridization Followed with Rolling Circle Amplification

Formation of Visible Aggregates between Rolling Circle Amplification Products and Magnetic Nanoparticles as a Strategy for Point-of-Care Diagnostics

Visual detection of rolling circle amplification products (RCPs) has been achieved by specific aggregation with magnetic nanoparticles. The method presented here reliably generates aggregates in 1.5 h; these are visible to the naked eye in samples containing at least 0.4 fmol of RCPs. In addition, alternate current susceptometry and absorbance spectroscopy have also been used to quantify the amplified products. The specificity of the detection method was tested, and no non-specific aggregation was detected in samples containing up to 20 fmol of non-complementary amplified DNA. This method is a versatile tool for detecting pathogenic DNA in point-of-care diagnostics, with no readout equipment required. However, chips and automated assays can be used in conjugation with the developed method since detection and quantification can be achieved by commercially available readout instruments.

Attomolar analyte sensing techniques (AttoSens): a review on a decade of progress on chemical and biosensing nanoplatforms

Detecting the ultra-low abundance of analytes in real-life samples, such as biological fluids, water, soil, and food, requires the design and development of high-performance biosensing modalities. The breakthrough efforts from the scientific community have led to the realization of sensing technologies that measure the analyte's ultra-trace level, with relevant sensitivity, selectivity, response time, and sampling efficiency, referred to as Attomolar Analyte Sensing Techniques (AttoSens) in this review. In an AttoSens platform, 1 aM detection corresponds to the quantification of 60 target analyte molecules in 100 μL of sample volume. Herein, we review the approaches listed for various sensor probe design, and their sensing strategies that paved the way for the detection of attomolar (aM: 10^-18 M) concentration of analytes. A summary of the technological advances made by the diverse AttoSens trends from the past decade is presented.

A highly sensitive fluorescence biosensor for detection of Staphylococcus aureus based on HCR-mediated three-way DNA junction nicking enzyme assisted signal amplification

Sensitive and efficient monitoring of food-borne bacteria is of great importance for food safety control. Herein, a novel biosensor for highly sensitive detection of Staphylococcus aureus (S. aureus) was constructed by combining hybridization chain reaction (HCR) and nicking enzyme. Different from the upstream-downstream based circuit, the proposed biosensor integrated HCR circuit and three-way DNA junction nicking enzyme assisted signal amplification (3WJ-NEASA) into a virtuous circle of promotion. In the HCR-mediated 3WJ-NEASA sensing strategy, target DNA of S. aureus initiated the self-assembly between HCR hairpins (H1 and H2), which exposed the gap to capture molecular beacon (MB) and construct the 3WJ structure. Meanwhile, MB increased the stability of HCR nanowires and enhanced the efficiency of the HCR circuit, and thus more 3WJ-NEASA circuits were generated in HCR nanowires. Benefiting from the synergistic amplification coupling HCR and 3WJ-NEASA, this isothermal biosensor can detect as low as 6.7 pM of target DNA in one step within only 30 min. Furthermore, the HCR-mediated 3WJ-NEASA assay has been applied in the detection of S. aureus with a limit of detection (LOD) as low as 1.2 × 10¹ cfu mL^-1, and has exhibited reliable practicability in spiked milk. It is the first time that a DNA biosensor combining HCR and 3WJ-NEASA for dual signal amplification was developed and has been adopted to the sensitive analysis of food-borne bacteria. Additionally, this strategy can serve as a universal platform for monitoring other analytes, and therefore possesses broad application prospects in food safety and environmental monitoring.

A Deoxyribozyme-Initiated Self-Catalytic DNA Machine for Amplified Live-Cell Imaging of MicroRNA

Functional DNA nanostructures have been widely used in various bioassay fields. Yet, the programmable assembly of functional DNA nanostructures in living cells still represents a challenging goal for guaranteeing the sensitive and specific biosensing utility. In this work, we report a self-catalytic DNA assembly (SDA) machine by using a feedback deoxyribozyme (DNAzyme)-amplified branched DNA assembly. This SDA system consists of catalytic self-assembly (CSA) and DNAzyme amplification modules for recognizing and amplifying the target analyte. The analyte initiates the CSA reaction, leading to the formation of Y-shaped DNA that carries two RNA-cleaving DNAzymes. One DNAzyme can then successively cleave the corresponding substrate and generate numerous additional inputs to activate new CSA reactions, thus realizing a self-catalytic amplification reaction. Simultaneously, the other DNAzyme is assembled as a versatile signal transducer for cleaving the fluorophore/quencher-modified substrate, leading to the generation of an amplified fluorescence readout. By incorporating a flexible auxiliary sensing module, the SDA system can be converted into a universal sensing platform for detecting cancerous biomarkers, e.g., a well-known oncogene microRNA-21 (miR-21). Moreover, the SDA system realized the precise intracellular miR-21 imaging in living cells, which is attributed to the reciprocal amplification property between CSA reactions and DNAzyme biocatalysis. This compact SDA amplifier machine provides a universal and facile toolbox for the highly efficient identification of cancerous biomarkers and thus holds great potential for early cancer diagnosis.

Isothermal amplifications - a comprehensive review on current methods

The introduction of nucleic acid amplification techniques has revolutionized the field of medical diagnostics in the last decade. The advent of PCR catalyzed the increasing application of DNA, not just for molecular cloning but also for molecular based diagnostics. Since the introduction of PCR, a deeper understanding of molecular mechanisms and enzymes involved in DNA/RNA replication has spurred the development of novel methods devoid of temperature cycling. Isothermal amplification methods have since been introduced utilizing different mechanisms, enzymes, and conditions. The ease with which isothermal amplification methods have allowed nucleic acid amplification to be carried out has had a profound impact on the way molecular diagnostics are being designed after the turn of the millennium. With all the advantages isothermal amplification brings, the issues or complications surrounding each method are heterogeneous making it difficult to identify the best approach for an end-user. This review pays special attention to the various isothermal amplification methods by classifying them based on the mechanistic characteristics which include reaction formats, amplification information, promoter, strand break, and refolding mechanisms. We would also compare the efficiencies and usefulness of each method while highlighting the potential applications and detection methods involved. This review will serve as an overall outlook on the journey and development of isothermal amplification methods as a whole.

Protein detection based on rolling circle amplification sensors

Rolling circle amplification (RCA) is an isothermal process under the action of DNA polymerases. Large-scale DNA templates have been generated using RCA for target detection. Some signal amplification strategies including optical sensors and electrochemical sensors based on RCA have been applied to achieve sensitive detection. Sensors based on RCA have attracted increasing interest. Advances in RCA-based sensors for protein detection are reviewed in this paper. The advantages and detection mechanisms of sensors based on RCA are revealed and discussed. Finally, possible challenges and future perspectives are also outlined.

Affinity biosensors developed with quantum dots in microfluidic systems

Quantum dots (QDs) are synthetic semiconductor nanocrystals with unique optical and electronic properties due to their size (2-10 nm) such as high molar absorption coefficient (10-100 times higher than organic dyes), resistance to chemical degradation, and unique optoelectronic properties due to quantum confinement (high quantum yield, emission color change with size). Compared to organic fluorophores, the narrower emission band and wider absorption bands of QDs offer great advantages in cell imaging and biosensor applications. The optoelectronic features of QDs have prompted their intensive use in bioanalytical, biophysical, and biomedical research. As the nanomaterials have been integrated into microfluidic systems, microfluidic technology has accelerated the adaptation of nanomaterials to clinical evaluation together with the advantages such as being more economical, more reproducible, and more susceptible to modification and integration with other technologies. Microfluidic systems serve an important role by being a platform in which QDs are integrated for biosensing applications. As we combine the advantages of QDs and microfluidic technology for biosensing technology, QD-based biosensor integrated with microfluidic systems can be used as an advanced and versatile diagnostic technology in case of pandemic. Specifically, there is an urgent necessity to have reliable and fast detection systems for COVID-19 virus. In this review, affinity-based biosensing mechanisms which are developed with QDs are examined in the domain of microfluidic approach. The combination of microfluidic technology and QD-based affinity biosensors are presented with examples in order to develop a better technological framework of diagnostic for COVID-19 virus.

Photoelectrochemical aptasensor with low background noise

In photoelectrochemical (PEC) detection, enhancing the PEC signal and depressing the blank signal are conducive to improve the sensitivity. Because the carbon nanotube (CNT) effectively transfers photogenerated electrons from SnSe to the electrode, the composite nanomaterial CNTs/SnSe generates a strong PEC signal. Methionine (Met), AuNPs, and probe DNA are woven together forming a nanoprobe which is used as a quencher to quench the PEC signal of CNTs/SnSe. When the nanoprobe and CNTs/SnSe are modified onto the electrode, there is a low blank signal. In the presence of metastatic breast cancer cells, the cells interact with the aptamer of dsDNA; concomitantly, cDNA is released to trigger catalytic hairpin assembly (CHA). As a result, a new dsDNA which has an overhang is formed. The nanoprobe on the surface of the electrode hybridizes with the newly formed dsDNA. Subsequently, the nanoprobe is released from the surface of the electrode and the quenching effect between the nanoprobe and the CNTs/SnSe disappears. The PEC aptasensor is linear in the concentration range of 300-5,000 cells/mL, and the detection limit is 180 cells/mL under optimized conditions. The relative standard deviation (RSD) is 3.6% at 10,000 cells/mL. This work demonstrates a promising strategy using CNTs/SnSe as the photoactive material and Met-AuNPs as the quencher to establish a PEC aptasensor with a high PEC response and low blank signal. It can be used to detect bioactive substances at ultralow levels prospectively. Graphical abstract.

Homogeneous circle-to-circle amplification for real-time optomagnetic detection of SARS-CoV-2 RdRp coding sequence

Circle-to-circle amplification (C2CA) is a specific and precise cascade nucleic acid amplification method consisting of more than one round of padlock probe ligation and rolling circle amplification (RCA). Although C2CA provides a high amplification efficiency with a negligible increase of false-positive risk, it contains several step-by-step operation processes. We herein demonstrate a homogeneous and isothermal nucleic acid quantification strategy based on C2CA and optomagnetic analysis of magnetic nanoparticle (MNP) assembly. The proposed homogeneous circle-to-circle amplification eliminates the need for additional monomerization and ligation steps after the first round of RCA, and combines two amplification rounds in a one-pot reaction. The second round of RCA produces amplicon coils that anneal to detection probes grafted onto MNPs, resulting in MNP assembly that can be detected in real-time using an optomagnetic sensor. The proposed methodology was applied for the detection of a synthetic complementary DNA of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2, also known as 2019-nCoV) RdRp (RNA-dependent RNA polymerase) coding sequence, achieving a detection limit of 0.4 fM with a dynamic detection range of 3 orders of magnitude and a total assay time of ca. 100 min. A mathematical model was set up and validated to predict the assay performance. Moreover, the proposed method was specific to distinguish SARS-CoV and SARS-CoV-2 sequences with high similarity.

An electrochemical aptasensor for lead ion detection based on catalytic hairpin assembly and porous carbon supported platinum as signal amplification

A novel electrochemical aptasensor for lead detection based on catalytic hairpin assembly and PtNPs@PCs as signal amplification.

A Multicolor Fluorescence Nanoprobe Platform Using Two-Dimensional Metal Organic Framework Nanosheets and Double Stirring Bar Assisted Target Replacement for Multiple Bioanalytical Applications

Multicolor fluorescence probes can show fluorescence of different colors when detecting different targets, and the excellent feature can create a highly differentiated multicolor sensing platform. However, most of the previously reported multicolor luminescent materials usually suffer from high toxicity and photobleaching, complex preparation procedures, and poor water solubility, which may not be conducive to bioanalytical applications. Two-dimensional metal organic frameworks (2D MOFs), which have large specific surface areas with long-range fluorescence quenching coupled with biomolecular recognition events, have encouraged innovation in biomolecular probing. Here, we propose a 2D-MOF-based multicolor fluorescent aptamer nanoprobe using a double stirring bar assisted target replacement system for enzyme-free signal amplification. It utilizes the interaction between 2D MOFs and DNA molecules to detect multiple antibiotics quickly, sensitively, and selectively. Since 2D MOFs have excellent quenching efficiency for luminescence of fluorescent-dye-labeled single-strand DNA (ssDNA), the background fluorescence can be largely reduced and the signal-to-noise ratio can be improved. When the adsorbed ssDNA formed double helix double-stranded DNA with its complementary ssDNA, its fluorescence can be almost fully recovered. The assay was tested by detecting chloramphenicol (CAP), oxytocin (OTC), and kanamycin (KANA) in biological samples. The developed aptasensor was sufficiently sensitive to detect the antibiotic residues as low as 1.5 pM CAP, 2.4 pM OTC, and 1 pM KANA (S/N = 3). It has been preliminarily used for multicolor imaging of three different antibiotics in fish tissue slices with satisfactory results.

Electrochemical detection of DNA mismatches using a branch-shaped hierarchical SWNT-DNA nano-hybrid bioelectrode

Common approaches for DNA mutation detection are high cost and have difficult or complex procedure. We propose a fast quantitative method for recognition of DNA mutation based on SWNT/DNA self-assembled nanostructure. Covalent SWNT/DNA hybrid nanostructures are widely used in the fabrication of electrochemical biosensors. Interfacing carbon nanotubes with DNA in particular, is used as a detection method for the analysis of genetic disorders or the detection of mismatches in DNA hybridisation. We have designed a self-assembled, branch-shaped hybrid nanostructure by hybridisation of two sticky oligos that are attached to the ends of SWNTs via a linker oligo. These hybrid nanostructures showed a good conductivity that was greater than free SWNTs. Impedance spectroscopy studies illustrated that the conductivity of these hybrid nanostructures depended on the conformation and structure of the hybridised DNA. We demonstrated that the strategy of using SWNT/DNA self-assembled hybrid nanostructure fabrication yields sensitive and selective tools to discriminate mismatches in DNA. Cyclic voltammetry (CV) and impedance spectroscopy clearly revealed that the conductivity of the branch-shaped and hierarchical hybridised SWNT/DNA nanostructure is higher when matched, than when mismatched in a 1 and 1' hybridised SWNT/DNA nanostructure. Rapid biosensing of match and mismatch nanostructure based on carbon printed electrode showed similar results which can be used for rapid and fast detection of DNA mismatch.

Dual Signal Amplification by eATRP and DNA-Templated Silver Nanoparticles for Ultrasensitive Electrochemical Detection of Nucleic Acids

Herein, an ultrasensitive and novel platform for DNA detection is reported, which combines DNA-templated silver nanoparticles (AgNPs) with electrochemical atom transfer radical polymerization signal amplification. Peptide nucleic acid (PNA) functionalized with thiol was modified to the Au electrode surface as a probe to specifically capture target DNA (T-DNA). After Zr⁴⁺ binds to phosphate on DNA, the initiator [α-bromophenylacetic acid (BPAA)] of ATRP is attached to PNA/DNA heteroduplexes based on the phosphate groups of T-DNA and carboxylate groups of BPAA via zirconium-phosphate-carboxylate chemistries. A large number of glyco-syloxyethyl methacrylates (GEMA) were captured on the formed PNA/DNA duplex via ATRP. Afterwards, the polysaccharides were oxidized to polymerized aldehydes with sodium periodate (NaIO₄). In addition, AgNPs were deposited on the electrode surface by silver mirror reaction. The results indicate that the amount of AgNPs proportional to the T-DNA was quantified through differential pulse voltammetry. Furthermore, it proves that the modified electrode has good performance in DNA detection, indicating that the DNA sensor has high selectivity, high sensitivity, and stable repeatability. Under the optimal conditions, a good linear relationship is obtained in the range of 10 aM to 10 pM with the correlation coefficient of 0.992, and the detection limit is calculated to be as low as 4.725 aM. In addition, the sensor is successfully used to detect DNA in actual serum samples with satisfactory results, which indicates huge promise for detecting gene biomarkers and clinical analysis.

Rolling circle amplification-mediated in situ synthesis of palladium nanoparticles for the ultrasensitive electrochemical detection of microRNA

Herein, an ultrasensitive and label-free electrochemical biosensor was developed for microRNA (miRNA) based on rolling circle amplification (RCA)-mediated palladium nanoparticles (PdNPs). The sensor was fabricated by immobilizing dual-functionalized hairpin probes onto an electrode. The specific recognition of target miRNA-21 by the hairpin probes could trigger the RCA reaction, which produced numerous guanine (G)-rich long single-stranded DNAs (ssDNAs). Based on the interaction of the Pd^II species with the nitrogen atoms of the G bases, these G-rich long ssDNAs served as specific templates in the in situ synthesis of massive PdNPs as electrochemical indicators. The formation of PdNPs was demonstrated to be exactly along the RCA products by high-resolution transmission electron microscopy. Using this cascade signal amplification strategy, the developed biosensor achieved a linear range of 50 aM-100 fM with an ultralow detection limit of 8.6 aM miRNA-21. Furthermore, the developed biosensor exhibited good selectivity, reproducibility, stability and satisfactory feasibility for miRNA-21 detection in human serum samples; this ensured significant potential of this biosensor in disease diagnosis and prognosis applications.

Ultrasensitive Electrochemical Biosensor Developed by Probe Lengthening for Detection of Genomic DNA in Human Serum

As an alternative to most of the reported nucleic acid amplification-based electrochemical DNA biosensors used for detection of trace levels of genomic DNA, we herein present a novel detection concept. The proposed system involves the conversion of two short double-stranded DNAs (dsDNAs), labeled with a thiol-tag or biotin-tag, into a single integrated dsDNA containing thiol and biotin at both terminals in the presence of target DNA through ligase chain reaction (LCR) and followed by the immobilization of these integrated dsDNAs on a bovine serum albumin (BSA)-modified gold electrode surface. Owing to rapid depletion of the two short dsDNAs via LCR, the integrated dsDNAs were generated in an exponential manner so that this sensoring approach offered a limit of detection of 25 yoctomoles (15 copies in 50 μL sample volumes), a high discrimination of single-base mismatch and a wide linear concentration range (across 6 orders of magnitude) for target DNA. Significantly, the proposed sensor, which has simplicity in operation and ease of miniaturization, detected the target of interest in total nucleic acid extracts derived from clinical serum samples with excellent results, thereby demonstrating its considerable diagnostic potential in fields ranging from virus detection to the diagnosis of genetic diseases.

DNA conformational polymorphism for biosensing applications

In this mini review, we will briefly introduce the rapid development of DNA conformational polymorphism in biosensing field, including canonical DNA duplex, triplex, quadruplex, DNA origami, as well as more functionalized DNAs (aptamer, DNAzyme etc.). Various DNA structures are adopted to play important roles in sensor construction, through working as recognition receptor, signal reporter or linking staple for signal motifs, etc. We will mainly summarize their recent developments in DNA-based electrochemical and fluorescent sensors. For the electrochemical sensors, several types will be included, e.g. the amperometric, electrochemical impedance, electrochemiluminescence, as well as field-effect transistor sensors. For the fluorescent sensors, DNA is usually modified with fluorescent molecules or novel nanomaterials as report probes, excepting its core recognition function. Finally, general conclusion and future perspectives will be discussed for further developments.

Universal DNA biosensing based on instantaneously electrostatic attraction between hexaammineruthenium (III) and DNA molecules

Despite rapid progress in DNA biosensors by employing various materials as well as techniques, most of the reported sensors are based on specific recognition of a DNA fragment, however can not perform universal measurement of DNA molecules (i.e. genomic DNA). In this work, we proposed a novel DNA biosensing method based on instantaneously electrostatic attraction (IEA) between hexaammineruthenium (III) and DNA molecules. The current variation of freely diffused Ru(NH₃)₆³⁺ caused by its quick and strong static interaction with phosphate backbones was employed as a universal probe to detect DNA molecules in solution, with no need for immobilization of capture probes on the electrode. After optimization, 30 μL of 300 μM Ru(NH₃)₆³⁺ solution was added onto the gold electrode with a working electrode diameter of 2 mm, and a detection limit of 3.8 ng/μL was achieved, which is equivalent to NanoDrop™ One spectrometer, the commonly used instrument for DNA quantification. Using reusable and inexpensive gold electrode, the approach provided an easy-operated sequence-independent DNA detection method, and was proved to be able to detect genomic and plasmid DNA directly.

Self-Replication-Assisted Rapid Preparation of DNA Nanowires at Room Temperature and Its Biosensing Application

A rapid room-temperature DNA nanowires preparation strategy on the basis of self-replicating catalyzed hairpin assembly (SRCHA) was reported. In this system, three hairpin probes (P1, P2, and P3) were well-designed and partially hybridize to each other, and two split trigger DNA sequences were integrated into P1 and P3, respectively. When the SRCHA was initiated by the trigger DNA, a series of DNA assembly steps based on the toehold-mediated DNA strand displacement were activated, and the Y shaped DNA (P1-P2-P3) was formed. In that case, the two split trigger DNA sequences will come into close-enough proximity to form the trigger DNA replicas, which can initiate the additional SRCHA reaction cycles for DNA nanowire preparation, and eventually a rapid room-temperature DNA nanowires preparation strategy without need of fuel strands was successfully developed. Furthermore, the prepared DNA nanowires have been used to develop a rapid and signal amplified sensing platform for sensitive adenosine triphosphate (ATP) detection.

Electrochemical DNA Biosensing via Electrochemically Controlled Reversible Addition-Fragmentation Chain Transfer Polymerization

Sensitive and selective sensing of biological molecules is fundamental to disease diagnosis and infectious disease surveillance. Herein, an ultrasensitive and highly selective electrochemical DNA biosensor is described by exploiting the electrochemically controlled reversible addition-fragmentation chain-transfer (eRAFT) polymerization as a signal amplification strategy and the peptide nucleic acid (PNA) probes as the recognition elements. Specifically, the PNA probes with a thiol at their 5'-terminals are anchored to a gold electrode surface (via gold-sulfur self-assembly) for sequence-specific recognition of target DNA (tDNA) fragments, of which the phosphate sites serve as the anchorages for the targeted labeling (via the well-established phosphate-Zr⁴⁺-carboxylate chemistry) of the carboxyl-group-containing chain-transfer agents (CTAs) for the succedent eRAFT polymerization, wherein the initiating radicals are generated through electrochemical reduction of aryl diazonium salts under a potentiostatic condition. In the presence of ferrocenylmethyl methacrylate (FcCH═CH₂) as the monomer, the grafting of polymer chains from the CTA-anchored sites as a result of the eRAFT polymerization brings numerous electroactive Fc tags to the electrode surface, outputting a high electrochemical sensing signal even in the presence of trace amounts of tDNA fragments. Under the optimized conditions, the linear range of the described electrochemical DNA biosensor spans from 10 aM to 10 pM ( R² = 0.998), with an attomolar detection limit (4.1 aM) being achieved. Moreover, the described electrochemical DNA biosensor is highly selective and applicable to the sensing of tDNA fragments in complex serum samples. Given its high efficiency, easy operation, and low cost, this biosensor shows great promise in real applications.

A new electrochemical aptasensor for sensitive assay of a protein based on the dual-signaling electrochemical ratiometric method and DNA walker strategy

Herein, a new electrochemical aptamer-based biosensor for highly sensitive assay of thrombin has been developed based on the dual-signaling electrochemical ratiometric method and the DNA walker strategy, and shows a low detection limit of about 56 fM.

A voltammetric immunosensor for clenbuterol based on the use of a MoS2-AuPt nanocomposite

An ultrasensitive immunosensor for the direct detection of the illegally used livestock feed clebuterol (CLB) is described. It is based on the use of a glassy carbon electrode modified with an MoS₂-AuPt nanocomposite and on biotin-streptavidin interaction. The use of MoS₂-AuPt accelerates electron transfer, and this leads to a sharp increase in the electrochemical signal for the electrochemical probe hydrogen peroxide. Differential pulse voltammetry was used to record the current signal at a peak potential of -0.18 V (vs SCE). Under optimal conditions, the electrode has a linear response in the 10 pg·mL^-1 to 100 ng·mL^-1 CLB concentration range and a 6.9 pg·mL^-1 detection limit (based on the 3σ criterium). This immunosensor is sensitive, highly specific and acceptably reproducible, and thus represents a valuable tool for the determination of CLB in pork. Graphical abstract Schematic of a voltammetric immunosensor for the determination of clenbuterol (CLB) based on the use of a nanocomposite prepared from molybdenum disulfide and a gold-platinum alloy (MoS₂-AuPt), and making use of the biotin-streptavidin system.

Comparison of Different Strategies for the Development of Highly Sensitive Electrochemical Nucleic Acid Biosensors Using Neither Nanomaterials nor Nucleic Acid Amplification

Currently, electrochemical nucleic acid-based biosensing methodologies involving hybridization assays, specific recognition of RNA/DNA and RNA/RNA duplexes, and amplification systems provide an attractive alternative to conventional quantification strategies for the routine determination of relevant nucleic acids at different settings. A particularly relevant objective in the development of such nucleic acid biosensors is the design of as many as possible affordable, quick, and simple methods while keeping the required sensitivity. With this aim in mind, this work reports, for the first time, a thorough comparison between 11 methodologies that involve different assay formats and labeling strategies for targeting the same DNA. The assayed approaches use conventional sandwich and competitive hybridization assays, direct hybridization coupled to bioreceptors with affinity for RNA/DNA duplexes, multienzyme labeling bioreagents, and DNA concatamers. All of them have been implemented on the surface of magnetic beads (MBs) and involve amperometric transduction at screen-printed carbon electrodes (SPCEs). The influence of the formed duplex length and of the labeling strategy have also been evaluated. Results demonstrate that these strategies can provide very sensitive methods without the need for using nanomaterials or polymerase chain reaction (PCR). In addition, the sensitivity can be tailored within several orders of magnitude simply by varying the bioassay format, hybrid length or labeling strategy. This comparative study allowed us to conclude that the use of strategies involving longer hybrids, the use of antibodies with specificity for RNA/DNA heteroduplexes and labeling with bacterial antibody binding proteins conjugated with multiple enzyme molecules, provides the best sensitivity.

A dual-cycling biosensor for target DNA detection based on the toehold-mediated strand displacement reaction and exonuclease III assisted amplification

Based on the toehold-mediated strand displacement reaction and exonuclease III assisted amplification, a sensitive and simple target DNA biosensor was established.

Advanced DNA-Based Point-of-Care Diagnostic Methods for Plant Diseases Detection

Diagnostic technologies for the detection of plant pathogens with point-of-care capability and high multiplexing ability are an essential tool in the fight to reduce the large agricultural production losses caused by plant diseases. The main desirable characteristics for such diagnostic assays are high specificity, sensitivity, reproducibility, quickness, cost efficiency and high-throughput multiplex detection capability. This article describes and discusses various DNA-based point-of care diagnostic methods for applications in plant disease detection. Polymerase chain reaction (PCR) is the most common DNA amplification technology used for detecting various plant and animal pathogens. However, subsequent to PCR based assays, several types of nucleic acid amplification technologies have been developed to achieve higher sensitivity, rapid detection as well as suitable for field applications such as loop-mediated isothermal amplification, helicase-dependent amplification, rolling circle amplification, recombinase polymerase amplification, and molecular inversion probe. The principle behind these technologies has been thoroughly discussed in several review papers; herein we emphasize the application of these technologies to detect plant pathogens by outlining the advantages and disadvantages of each technology in detail.

Sequence specific recognition of HIV-1 dsDNA in the large amount of normal dsDNA based upon nicking enzyme signal amplification and triplex DNA

A sensitive fluorescent strategy for sequence specific recognition of HIV dsDNA was established based upon Nicking Enzyme Signal Amplification (NESA) and triplex formation. dsDNA sequence from the site 7960 to site 7991 of the HIV1 dsDNA gene was designed as target dsDNA, which was composed of two complementary strands Oligonucleotide 1 with the sequence of 3'-CTT CCT TAT CTT CTT CTT CCA CCT CTC TCT CT-5' (Oligo-1) and Oligonucleotide 2 with the sequence of 5'-GAA GGA ATA GAA GAA GAA GGT GGA GAG AGA GA-3' (Oligo-2). As a proof of concept, Oligonucleotide 5'-6-FAM-GAG GTG GAG CTG CGC GAC TCC TCC TCT CTC TCT CTC CAC CTC-BHQ-1-3'(Oligo-4) acted as molecular beacon(MB) probe, Oligonucleotide 5'-CTT CCT TAT CTT CTT CTT CCA AAA GGA GTC GCG-3' (Oligo-7) acted as assistant probe. In the presence of target dsDNA, Oligo-4 and Oligo-7 hybridized with target dsDNA through triplex formation and formed Y-shaped structure, NESA occurred with further addition of Nt.BbvCI, accompanied with the release of fluorescent DNA fragment circularly, resulted in the increase of fluorescence intensity. Under the optimum conditions, the fluorescence intensity was linear with the concentration of target dsDNA over the range from 100pM to 200nM, the linear regression equation was I = 1.266 C + 84.3 (C: nmol/L, R² = 0.991), with a detection limit of 65pM. Moreover, the effect of coexisted other dsDNA was investigated as well, and satisfactory results were obtained.

Isothermal Amplification for MicroRNA Detection: From the Test Tube to the Cell

MicroRNAs (miRNAs) are a class of small noncoding RNAs that act as pivotal post-transcriptional regulators of gene expression, thus involving in many fundamental cellular processes such as cell proliferation, migration, and canceration. The detection of miRNAs has attracted significant interest, as abnormal miRNA expression is identified to contribute to serious human diseases such as cancers. Particularly, miRNAs in peripheral blood have recently been recognized as important biomarkers potential for liquid biopsy. Furthermore, as miRNAs are expressed heterogeneously in different cells, investigations into single-cell miRNA expression will be of great value for resolving miRNA-mediated regulatory circuits and the complexity and heterogeneity of miRNA-related diseases. Thus, the development of miRNA detection methods, especially for complex clinic samples and single cells is in great demand. In this Account, we will present recent progress in the design and application of isothermal amplification enabling miRNA detection transition from the test tube to the clinical sample and single cell, which will significantly advance our knowledge of miRNA functions and disease associations, as well as its translation in clinical diagnostics. miRNAs present a huge challenge in detection because of their extremely short length (∼22 nucleotides) and sequence homology (even with only single-nucleotide variation). The conventional golden method for nucleic acid detection, quantitative PCR (qPCR), is not amenable to directly detecting short RNAs and hardly enables distinguishing between miRNA family members with very similar sequences. Alternatively, isothermal amplification has emerged as a powerful method for quantification of nucleic acids and attracts broad interest for utilization in developing miRNA assays. Compared to PCR, isothermal amplification can be performed without precise control of temperature cycling and is well fit for detecting short RNA or DNA. We and other groups are seeking methods based on isothermal amplification for detecting miRNA with high specificity (single-nucleotide resolution) and sensitivity (detection limit reaching femtomolar or even attomolar level). These methods have recently been demonstrated to quantify miRNA in clinical samples (tissues, serum, and plasma). Remarkably, attributed to the mild reaction conditions, isothermal amplification can be performed inside cells, which has recently enabled miRNA detection in single cells. The localized in situ amplification even enables imaging of miRNA at the single-molecule level. The single-cell miRNA profiling data clearly shows that genetically identical cells exhibit significant cell-to-cell variation in miRNA expression. The leap of miRNA detection achievements will significantly contribute to its full clinical adoption and translation and give us new insights into miRNA cellular functions and disease associations.

An electrochemical aptasensor for multiplex antibiotics detection using Y-shaped DNA-based metal ions encoded probes with NMOF substrate and CSRP target-triggered amplification strategy

An effective electrochemical aptasensor has been developed for the detection of multiplex antibiotics using Y-shaped DNA probes. These probes-based metal ions encoded the nanoscale metal-organic frameworks (NMOF) as a substrate, and circular strand-replacement DNA polymerization (CSRP) target triggered the amplification strategy. The Y-DNA probes (Y-DNA) were assembled using an assisted DNA probe (assisted DNA labeled with magnetic gold nanoparticles) which can hybridize to the captured DNA probe (consisting of aptamer and primer recognition region), and signal tags (NMOF encapsulating signal DNAs and different metal ions such as Pb²⁺ or Cd²⁺). Notably, NMOF was employed as the developed platform with a large specific area to load abundant metal ions that can produce distinguishable signals. In the presence of targets, chloramphenicol (CAP) and oxytetracycline (OTC) as models, the conformational change of the captured DNA can disassemble the Y-DNA probes that can consequently release the signal tags in the supernatant due to the high affinity of targets towards the aptamer domain than its complementary sequences. Subsequently, the exposed sequences of captured DNA serve as the initiators for triggering the target cyclic-induced polymerization with the assistance of Bst DNA polymerase. Thus, numerous signal tags could be detected by square wave voltammetry in the supernatant after magnetic separation, thereby amplifying the electrochemical signals. The proposed strategy exhibited a high sensitivity to antibiotics with a detection limit of 33 and 48 fM (S/N = 3) towards CAP and OTC, respectively. Moreover, this aptasensor showed promising applications for the detection of other analytes.

Label-free electrochemical aptasensor for adenosine detection based on cascade signal amplification strategy

In this work, a simple and highly sensitive label-free electrochemical aptasensor for adenosine detection was developed based on target-aptamer binding triggered nicking endonuclease-assisted strand-replacement DNA polymerization and rolling circle amplification (RCA) strategy. The magnetic beads (MB) probe, which was attached the aptamer of adenosine and mDNA, was firstly fabricated. In the presence of adenosine, mDNA was released from MB upon recognition of the aptamer to target adenosine. The released mDNA as the primer activated autonomous DNA polymerization/nicking process and accompanied by the continuous release of replicated DNA fragments. Subsequently, numerous released DNA fragments were captured on the working electrode, and then as initiators to trigger the downstream RCA process leading to the formation of a long ssDNA concatemer for loading large amounts of Ru(NH₃)₆³⁺. Therefore, a conspicuously amplified electrochemical signal through the developed dual-amplification strategy could be achieved. This method exhibited a high sensitivity toward adenosine with a detection limit of 0.032nM. Also, it exhibited high selectivity to different nucleoside families and good reproducibility. This design opens new horizons for integrating different disciplines, presenting a versatile tool for ultrasensitive detecting organic small molecules in medical research and clinical diagnosis.

Live Cell MicroRNA Imaging Using Exonuclease III-Aided Recycling Amplification Based on Aggregation-Induced Emission Luminogens

Enzyme-assisted detection strategies of microRNAs (miRNAs) in vitro have accomplished both great sensitivity and specificity. However, low expression of miRNAs and a complex environment in cells induces big challenges for monitoring and tracking miRNAs in vivo. The work reports the attempt to carry miRNA imaging into live cells, by enzyme-aided recycling amplification. We utilize facile probes based yellow aggregation-induced emission luminogens (AIEgens) with super photostable property but without quencher, which are applied to monitor miRNAs not only from urine sample extracts (in vitro) but also in live cells (in vivo). The assay could distinguish the cancer patients' urine samples from the healthy urine due to the good specificity. Moreover, the probe showed much higher fluorescence intensity in breast cancer cells (MCF-7) (miR-21 in high expression) than that in cervical cancer cells (HeLa) and human lung fibroblast cells (HLF) (miR-21 in low expression) in more than 60 min, which showed the good performance and super photostability for the probe in vivo. As controls, another two probes with FAM/Cy3 and corresponding quenchers, respectively, could perform miRNAs detections in vitro and parts of in vivo tests but were not suitable for the long-term cell tracking due to the photobleach phenomena, which also demonstrates that the probe with AIEgens is a potential candidate for the accurate identification of cancer biomarkers.