Trace-Level Mercury Ion (Hg2+) Analysis in Aqueous Sample Based on Solid-Phase Extraction Followed by Microfluidic Immunoassay

Repurposing an antimicrobial peptide for the development of a dual ion channel/molecular receptor-like platform for metal ion detection

The presence of non-essential metals in the environment as contaminants is prone to cause hazardous health problems following accumulation in the human body and the ensuing toxic effects. This calls for continuous discovery and innovation in the realm of developing easy-to-operate, cheap and sensitive sensors. Herein, we describe the proof of concept approach for designing a molecular receptor-like, chimeric sensor based on the pore-forming peptide alamethicin (Alm), tethered via a linker with an ultrashort peptide nucleic acid (PNA) moiety, capable of generating functional ion channel oligomers in planar lipid membranes. The working principle of the sensor exploits the ability of Hg2+ ions to complex mismatching thymine-thymine sequences between the PNA receptor moiety on Alm oligomers and free, thymine-based, single-stranded DNAs (ssDNAs) in solution, thus creating a stable base pair at the oligomer entrance. This generates a transducing mechanism which converts the metal ion complexation into a specific electrical signature of the self-assembled Alm oligomers, enabling selective Hg2+ ion detection. The platform is programmable, whereby the simple exchange of the PNA sequence and its ssDNA counterpart in solution rendered the system selective for Cu2+ ion detection. With further optimization, the presented solution has the potential to translate into miniaturized, cost-effective biosensors suitable for the real-time, label-free and continuous detection of metal ions or other biomolecules.

The application of nanoparticles in point-of-care testing (POCT) immunoassays

The Covid-19 pandemic has led to greater recognition of the importance of the fast and timely detection of pathogens. Recent advances in point-of-care testing (POCT) technology have shown promising results for rapid diagnosis. Immunoassays are among the most extensive POCT assays, in which specific labels are used to indicate and amplify the immune signal. Nanoparticles (NPs) are above the rest because of their versatile properties. Much work has been devoted to NPs to find more efficient immunoassays. Herein, we comprehensively describe NP-based immunoassays with a focus on particle species and their specific applications. This review describes immunoassays along with key concepts surrounding their preparation and bioconjugation to show their defining role in immunosensors. The specific mechanisms, microfluidic immunoassays, electrochemical immunoassays (ELCAs), immunochromatographic assays (ICAs), enzyme-linked immunosorbent assays (ELISA), and microarrays are covered herein. For each mechanism, a working explanation of the appropriate background theory and formalism is articulated before examining the biosensing and related point-of-care (POC) utility. Given their maturity, some specific applications using different nanomaterials are discussed in more detail. Finally, we outline future challenges and perspectives to give a brief guideline for the development of appropriate platforms.

Development of sensitive and portable immunosensors based on signal amplification probes for monitoring the mercury(II) ions

Mercury ion (Hg²⁺) as a major environmental pollutant threatens human health even at very low concentrations, so it is essential to monitor mercury residues in food. In this study, Hg²⁺ was conjugated with protein carrier using 1-(4-Isothiocyanobenzyl) ethylenediamine N, N, N', N'-tetraacetic acid (ITCBE) as a bifunctional chelator. 7A1 monoclonal antibody (mAb) against Hg²⁺-ITCBE with high affinity (7.3 × 10⁹ L/moL) and good specificity was obtained by cell fusion technology and performed to establish immunosensors. Immunochromatographic test strip using colloidal gold nanoparticles (AuNP with an average diameter of 18 nm) as signal reporter showed low sensitivity. Signal amplification probes including larger multi-branched gold nanoflowers (AuNF) and latex microspheres (LM) were employed to enhance the sensitivity of immunosensors. The visible limit of detection (vLOD) of the AuNF- and LM-based strip were determined to be 50 ng/mL and 25 ng/mL respectively, showing more sensitive than that of AuNP-based strip (200 ng/mL). Quantitative analysis showed that AuNF-based strip exhibited lower quantitative limit of detection (qLOD) (0.44 ng/mL) which was 20-fold lower than that of AuNP-based strip (8.92 ng/mL) for determination of Hg²⁺, and LM-based strip (0.49 ng/mL) was 18 times as sensitive as AuNP-based strip. In summary, the developed immunosensors using AuNF and LM as signal amplification probes exhibited excellent sensitivity and provided portable, on-site detection for Hg²⁺.

High Catalytic Activity of Fluorophore-Labeled Y-Shaped DNAzyme/3D MOF-MoS2NBs as a Versatile Biosensing Platform for the Simultaneous Detection of Hg2+, Ni2+, and Ag+ Ions

In this study, we have designed a three-fluorophore-labeled Y-shaped DNAzyme with a high catalytic cleavage activity and a three-dimensional (3D) MOF-MoS₂NB (metal-organic framework fused with molybdenum disulfide nanobox), which was synthesized as an efficient quencher of the fluorescent biosensor. The synthesized porous 3D MOF-MoS₂NBs and Y-shaped DNAzyme exhibited a good analytical response toward the simultaneous multiple detections of Hg²⁺, Ni²⁺, and Ag⁺ ions over the other coexisting metal ions. More specifically, the three kinds of enzyme aptamer and substrate aptamer (SA) were hybridized and annealed to form the Y-shaped DNAzyme structure and labeled with three different fluorophores such as FAM, TAMRA, and ROX over the 3'-end of SA. When the targets were induced, the DNAzyme was triggered to cleave the fluorophore-labeled SAs. Then, the cleaved SAs (FAM-SA, TAMRA-SA, and ROX-SA) were adsorbed on the 3D MOF-MoS₂NB surface to quench the fluorescence signal due to a noncovalent interaction (van der Waals and π-π stacking interaction), which transmuted the fluorescence on-state to off-state. As a result, the fluorescence assay confiscated the high selectivity and sensitivity for the target analytes of Hg²⁺, Ni²⁺, and Ag⁺ ions achieved for the detection limits of 0.11 nM, 7.8 μM, and 0.25 nM, respectively. Accordingly, the sensitivity of the developed sensor was explored with a better lower detection limit than the previously reported biosensors. The utility of the designed Y-shaped DNAzyme may find a broad field of application in real water sample analysis with interfering contaminants.

Trends in sensor development toward next-generation point-of-care testing for mercury

Mercury is one of the most common heavy metals and a major environmental pollutant that affects ecosystems. Since mercury and its compounds are toxic to humans, even at low concentrations, it is very important to monitor mercury contamination in water and foods. Although conventional mercury detection methods, including inductively coupled plasma mass spectrometry, atomic absorption spectroscopy, and gas chromatography-mass spectrometry, exhibit excellent sensitivity and accuracy, they require operation by an expert in a sophisticated and fully controlled laboratory environment. To overcome these limitations and realize point-of-care testing, many novel methods for direct sample analysis in the field have recently been developed by improving the speed and simplicity of detection. Commonly, these unconventional sensors rely on colorimetric, fluorescence, or electrochemical mechanisms to transduce signals from mercury. In the case of colorimetric and fluorescent sensors, benchtop methods have gradually evolved through technology convergence to give standalone platforms, such as paper-based assays and lab-on-a-chip systems, and portable measurement devices, such as smartphones. Electrochemical sensors that use screen-printed electrodes with carbon or metal nanomaterials or hybrid materials to improve sensitivity and stability also provide promising detection platforms. This review summarizes the current state of sensor platforms for the on-field detection of mercury with a focus on key features and recent developments. Furthermore, trends for next-generation mercury sensors are suggested based on a paradigm shift to the active integration of cutting-edge technologies, such as drones, systems based on artificial intelligence, machine learning, and three-dimensional printing, and high-quality smartphones.

Simplified Mercury Extraction from Coal Fly Ash for Quantification of Total Mercury by ELISA-based Immunoassay

A simplified two-step mercury extraction procedure enabled the selective and reproducible mercury recovery from actual coal fly ash (CFA). The optimized extraction procedure involving conventional enzyme-linked immunosorbent assay (ELISA)-based immunoassay allowed the ultra-sensitive quantification of total mercury content in CFA. The total mercury content of 41 CFA samples were successfully determined using the above-mentioned method, and the results were in agreement with those obtained by standard instrumental analysis (thermal decomposition atomic absorption spectrometry) within a 15% coefficient of variation. Our method for total mercury quantification is not only simple but suitable for management of the mercury content at coal-fired electric power plants and landfill sites, which deal with large amounts of waste CFA.

Novel nitrogen-doped carbon dots prepared under microwave-irradiation for highly sensitive detection of mercury ions

In this paper, new nitrogen doped carbon dots with a high quantum yield and novel optical properties were synthesized by a simple and fast one step microwave-assisted synthesis. Citric acid monohydrate was used as a carbon source and 2,2-dimethyl-1,3-propanediamine as nitrogen source. The prepared N-CDs were characterized by Fourier transform infrared, Raman, UV-visible and photoluminescence spectroscopies. Transmission electron microscope (TEM) images revealed that the N-CDs have distinctive flake-shape morphology. The N-CDs exhibit bright blue luminescence and quenching response towards Hg2+ ions. The quenching sensitivity was investigated. The results indicate a limit of detection as low as 7.63 nM and a linear relationship over the range 0-4.2 μM. In addition, the prepared N-CDs were tested as sensor for pH in the range from 1 to 7.

An integrated microfluidic device with solid-phase extraction and graphene oxide quantum dot array for highly sensitive and multiplex detection of trace metal ions

An integrated microfluidic device, consisting of a solid-phase extraction (SPE) unit for metal ion pretreatment, a micropump, a micromixer, and a detachable graphene oxide quantum dot (GOQD) array chip was constructed for selective and sensitive detection of As³⁺, Cd²⁺, and Pb²⁺. The entire process could be sequentially and automatically completed by actuating a pneumatic micropump. Effect of the pH for metal ion capture and pumping scheme for recovery efficiency were investigated on a chip. The ion As³⁺, Cd²⁺, and Pb²⁺ whose concentrations ranged from 10^-2 µM to 10² µM were successfully recovered with high efficiency over 80%. Monoplex and multiplex detection of As³⁺, Cd²⁺, and Pb²⁺ were then executed on a GOQD array chip. The target metal ions were specifically captured on the DNA aptamer linked GOQD array, which results in the fluorescence quenching of GOQD due to the electron transfer from the GOQD to metal ions under the laser irradiation. The proposed integrated SPE-GOQD array based microdevice could perform As³⁺, Cd²⁺, and Pb²⁺ detection with detection limits of 5.03 nM, 41.1 nM, and 4.44 nM, respectively. Simultaneous multiplex detection for binary or ternary mixture of As³⁺, Cd²⁺, and Pb²⁺ was performed, and the proposed integrated microdevice also showed high recovery values ranging from 83.52% to 128.3% from the environmental samples.

Fluorescence Regulation of Copper Nanoclusters via DNA Template Manipulation toward Design of a High Signal-to-Noise Ratio Biosensor

Because of bioaccumulation of food chain and disability of biodegradation, concentration of toxic mercury ions (Hg²⁺) in the environment dramatically varies from picomolar to micromolar, indicating the importance of well-performed Hg²⁺ analytical methods. Herein, reticular DNA is constructed by introducing thymine (T)-Hg²⁺-T nodes in poly(T) DNA, and copper nanoclusters (CuNCs) with aggregate morphology are prepared using this reticular DNA as a template. Intriguingly, the prepared CuNCs exhibit enhanced fluorescence. Meanwhile, the reticular DNA reveals evident resistance to enzyme digestion, further clarifying the fluorescence enhancement of CuNCs. Relying on the dual function of DNA manipulation, a high signal-to-noise ratio biosensor is designed. This analytical approach can quantify Hg²⁺ in a very wide range (50 pM to 500 μM) with an ultralow detection limit (16 pM). Besides, depending on the specific interaction between Hg²⁺ and reduced l-glutathione (GSH), this biosensor is able to evaluate the inhibition of GSH toward Hg²⁺. In addition, pollution of Hg²⁺ in three lakes is tested using this method, and the obtained results are in accord with those from inductively coupled plasma mass spectrometry. In general, this work provides an alternative way to regulate the properties of DNA-templated nanomaterials and indicates the applicability of this way by fabricating an advanced biosensor.

A Simple Paper-Based Colorimetric Device for Rapid Mercury(II) Assay

Contamination of the environment by mercury(II) ions (Hg(2+)) poses a serious threat to human health and ecosystems. Up to now, many reported Hg(2+) sensors require complex procedures, long measurement times and sophisticated instrumentation. We have developed a simple, rapid, low cost and naked-eye quantitative method for Hg(2+) environmental analysis using a paper-based colorimetric device (PCD). The sample solution to which platinum nanoparticles (PtNPs) have been added is dispensed to the detection zone on the PCD, where the 3,3,5,5-tetramethylbenzidine (TMB) substrate has been pre-loaded. The PtNPs effect a rapid oxidization of TMB, inducing blue colorization on the PCD. However, Hg(2+) in the solution rapidly interact with the PtNPs, suppressing the oxidation capacity and hence causing a decrease in blue intensity, which can be observed directly by the naked eye. Moreover, Hg(2+) at concentrations as low as 0.01 uM, can be successfully monitored using a fiber optic device, which gives a digital readout proportional to the intensity of the blue color change. This paper-based colorimetric device (PCD) shows great potential for field measurement of Hg(2+).

Green recovery of mercury from domestic and industrial waste

Recovery of mercury from effluents is fundamental for environmental preservation. A new, green method was developed for separation of mercury from effluent containing different metals. The extraction/separation of Hg(II) was studied using aqueous two-phase system (ATPS) comprising by polyethylene oxide (PEO1500) or triblock copolymers (L64 or L35), electrolyte (sodium citrate or sodium sulfate) and water in the presence or absence of chloride ions. The extraction behavior of the Hg(II) for the macromolecule-rich phase is affected by the following parameters: amount of added extractant, pH, and the nature of the electrolyte and macromolecule of the ATPS. The APTS of PEO1500+sodium citrate+H2O (pH 1.00 and 0.225 mol kg(-1) KCl) produced the highest Hg(II) %E=(92.3 ± 5.2)%. Under the same conditions, excellent separation factors (1.54×10(2)-3.21×10(10)) for recovery of mercury in the presence of co-existing metals were obtained. Efficient and selective extraction of Hg(II) from domestic and industrial synthetic effluents was achieved using this ATPS.

Preparation of neutral red functionalized Fe3O4@SiO2 and its application to the magnetic solid phase extraction of trace Hg(ii) from environmental water samples

Trace level of Hg(ii) was extracted from water by neutral red functionalized Fe₃O₄@SiO₂ based on the electrostatic and coordinate interactions of Hg(ii) with neutral red.

A portable lab-on-a-chip system for gold-nanoparticle-based colorimetric detection of metal ions in water

Heavy metal ions released into various water systems have a severe impact on the environment and human beings, and excess exposure to toxic metal ions through drinking water poses high risks to human health and causes life-threatening diseases. Thus, there is high demand for the development of a rapid, low-cost, and sensitive method for detection of metal ions in water. We present a portable analytical system for colorimetric detection of lead (Pb(2+)) and aluminum (Al(3+)) ions in water based on gold nanoparticle probes and lab-on-a-chip instrumentation. The colorimetric detection of metal ions is conducted via single-step assays with low limits of detection (LODs) and high selectivity. We design a custom-made microwell plate and a handheld colorimetric reader for implementing the assays and quantifying the signal readout. The calibration experiments demonstrate that this portable system provides LODs of 30 ppb for Pb(2+) and 89 ppb for Al(3+), both comparable to bench-top analytical spectrometers. It promises an effective platform for metal ion analysis in a more economical and convenient way, which is particularly useful for water quality monitoring in field and resource-poor settings.

Analytical method for the determination of trace toxic elements in milk based on combining Fe3O4 nanoparticles accelerated UV fenton-like digestion and solid phase extraction

A UV Fenton-like digestion method was developed first time for a complete digestion of milk samples by using 1.6 g L(-1) Fe3O4 magnetic nanoparticles, 0.2% (v/v) nitric acid, and 6% (w/w) H2O2. During the digestion, the liberated As-, Sb-, and Bi-containing species were preconcentrated onto the surface of Fe3O4 magnetic nanoparticles, which were conveniently separated with a hand-held magnet and subsequently dissolved in hydrochloric acid prior to hydride generation atomic fluorescence spectrometric detection. Owing to the integration of UV Fenton-like digestion, solid phase extraction, and magnetic separation into a single step, the developed method significantly simplifies sample preparation steps and reduces chemical consumption and hazardous waste. Limits of detection of 0.0015, 0.0022, and 0.0025 μg L(-1) were obtained for As, Sb, and Bi, respectively, using a 50 mL milk sample. The method was applied to the determination of these elements in a Certified Reference Material and milk samples.

A compact immunoassay platform based on a multicapillary glass plate

A highly sensitive, rapid immunoassay performed in the multi-channels of a micro-well array consisting of a multicapillary glass plate (MCP) and a polydimethylsiloxane (PDMS) slide is described. The micro-dimensions and large surface area of the MCP permitted the diffusion distance to be decreased and the reaction efficiency to be increased. To confirm the concept of the method, human immunoglobulin A (h-IgA) was measured using both the proposed immunoassay system and the traditional 96-well plate method. The proposed method resulted in a 1/5-fold decrease of immunoassay time, and a 1/56-fold cut in reagent consumption with a 0.05 ng/mL of limit of detection (LOD) for IgA. The method was also applied to saliva samples obtained from healthy volunteers. The results correlated well to those obtained by the 96-well plate method. The method has the potential for use in disease diagnostic or on-site immunoassays.

Simultaneous analysis of trace polymer additives in plastic beverage packaging by solvent sublation followed by high-performance liquid chromatography

Using solvent sublation (SS), a novel pretreatment method for separating and concentrating antioxidants and ultraviolet absorbers from plastic beverage packaging was developed, and these target compounds were quantitatively analyzed by high-performance liquid chromatography (HPLC). In the pretreatment section, the effects of the sublation solvent, solution pH, NaCl concentration, nitrogen flow rate, sublation time, and light condition on the sublation efficiency were investigated in detail and the optimal conditions of the solvent sublation process were selected. The analytical method of SS-HPLC showed good linearity in the range from 0.33 to 667 ng/mL with good presenting regression coefficients (0.9995 ≥ R(2) ≥ 0.9972). Low limits of detection (LODs) of 0.34-1.25 ng/mL and limits of quantification (LOQs) of 1.13-4.15 ng/mL were achieved. The mean recoveries were in the range from 88.73 to 107.65% at 20, 30, and 40 ng/mL spiked levels, and the relative standard deviations (RSDs) were in the range from 2.16 to 10.55%.