All-Integrated and Highly Sensitive Paper Based Device with Sample Treatment Platform for Cd2+ Immunodetection in Drinking/Tap Waters

Long wavelength emissive ZnO/CQDs phosphor with high color purity and its application in sensitive detection of cadmium (II)

Production of color-tunable emission via simple method for upcoming displays and lighting technologies, and their exceptional luminescence provide considerable potential in sensing application. As environmental pollution and diseases brought by cadmium have always been global issues, therefore, it is imperative to develop an inexpensive, quick, easy, and selective approach for detecting trace cadmium. Herein, we describe the preperation of ZnO/carbon quantum dots (ZnO/CQDs) nanocomposite that emits strongly in the yellow-orange zone with the chromaticity coordinates (0.51, 0.47) and a high color purity (CP) value of 94.3%. The as-produced ZnO/CQDs are used as a fluorescence sensor for Cd2+ via quenching mechanism due to competitive coordination between ZnO/CQDs and Cd2+ with the limit of detection (LOD) of 0.14 μM. Additionally, the suggested method can successfully detect Cd2+ in water samples, demonstrating the feasibility and potential uses of the sensing platform. This study may pave the way for the development of environmentally safe, high-performing, and inexpensive color-tunable phosphor for white LEDs and sensing applications.

A turn-on signal biosensor for cadmium(II) based on DNAzyme and stem-loop qPCR

Cadmium is a heavy metal that is exceedingly hazardous to humans and can enter the body through tainted food or drink, causing severe harm. It is critical to develop a technology for detecting cadmium in food and water that is sensitive and accurate. One such approach, which employs nucleases, is uncommon. A cadmium(II) turn-on biosensor was successfully created in this work using repetitive cleavage of certain specific nucleases for signal conversion and sophisticated stem-loop qPCR (quantitative polymerase chain reaction) for quick signal amplification and output. The method has strong selectivity and sensitivity for precise quantification, with a detection limit of 6 nmol L-1, i.e. 0.948 g L-1, which is far lower than the 5.0 g L-1 set by the United States Environmental Protection Agency, and it also operates well in retail rice samples.

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

A novel method of rapid detection for heavy metal copper ion via a specific copper chelator bathocuproinedisulfonic acid disodium salt

The extensive usage and production of copper may lead to toxic effects in organisms due to its accumulation in the environment. Traditional methods for copper detection are time consuming and infeasible for field usage. It is necessary to discover a real-time, rapid and economical method for detecting copper to ensure human health and environmental safety. Here we developed a colorimetric paper strip method and optimized spectrum method for rapid detection of copper ion based on the specific copper chelator bathocuproinedisulfonic acid disodium salt (BCS). Both biological assays and chemical methods verified the specificity of BCS for copper. The optimized reaction conditions were 50 mM Tris-HCl pH 7.4, 200 µM BCS, 1 mM ascorbate and less than 50 µM copper. The detection limit of the copper paper strip test was 0.5 mg/L by direct visual observation and the detection time was less than 1 min. The detection results of grape, peach, apple, spinach and cabbage by the optimized spectrum method were 0.91 μg/g, 0.87 μg/g, 0.19 μg/g, 1.37 μg/g and 0.39 μg/g, respectively. The paper strip assays showed that the copper contents of grape, peach, apple, spinach and cabbage were 0.8 mg/L, 0.9 mg/L, 0.2 mg/L, 1.3 mg/L and 0.5 mg/L, respectively. These results correlated well with those determined by inductively coupled plasma-mass spectrometry (ICP-MS). The visual detection limit of the paper strip based on Cu-BCS-AgNPs was 0.06 mg/L. Our study demonstrates the potential for on-site, rapid and cost-effective copper monitoring of foods and the environment.

Recent Aptamer-Based Biosensors for Cd2+ Detection

Cd²⁺, a major environmental pollutant, is heavily toxic to human health. Many traditional techniques are high-cost and complicated; thus, developing a simple, sensitive, convenient, and cheap monitoring approach is necessary. The aptamer can be obtained from a novel method called SELEX, which is widely used as a DNA biosensor for its easy acquisition and high affinity of the target, especially for heavy metal ions detection, such as Cd²⁺. In recent years, highly stable Cd²⁺ aptamer oligonucleotides (CAOs) were observed, and electrochemical, fluorescent, and colorimetric biosensors based on aptamers have been designed to monitor Cd²⁺. In addition, the monitoring sensitivity of aptamer-based biosensors is improved with signal amplification mechanisms such as hybridization chain reactions and enzyme-free methods. This paper reviews approaches to building biosensors for inspecting Cd²⁺ by electrochemical, fluorescent, and colorimetric methods. Finally, many practical applications of sensors and their implications for humans and the environment are discussed.

Development of sensitive and portable immunosensors based on signal amplification probes for monitoring the mercury(II) ions

Mercury ion (Hg²⁺) as a major environmental pollutant threatens human health even at very low concentrations, so it is essential to monitor mercury residues in food. In this study, Hg²⁺ was conjugated with protein carrier using 1-(4-Isothiocyanobenzyl) ethylenediamine N, N, N', N'-tetraacetic acid (ITCBE) as a bifunctional chelator. 7A1 monoclonal antibody (mAb) against Hg²⁺-ITCBE with high affinity (7.3 × 10⁹ L/moL) and good specificity was obtained by cell fusion technology and performed to establish immunosensors. Immunochromatographic test strip using colloidal gold nanoparticles (AuNP with an average diameter of 18 nm) as signal reporter showed low sensitivity. Signal amplification probes including larger multi-branched gold nanoflowers (AuNF) and latex microspheres (LM) were employed to enhance the sensitivity of immunosensors. The visible limit of detection (vLOD) of the AuNF- and LM-based strip were determined to be 50 ng/mL and 25 ng/mL respectively, showing more sensitive than that of AuNP-based strip (200 ng/mL). Quantitative analysis showed that AuNF-based strip exhibited lower quantitative limit of detection (qLOD) (0.44 ng/mL) which was 20-fold lower than that of AuNP-based strip (8.92 ng/mL) for determination of Hg²⁺, and LM-based strip (0.49 ng/mL) was 18 times as sensitive as AuNP-based strip. In summary, the developed immunosensors using AuNF and LM as signal amplification probes exhibited excellent sensitivity and provided portable, on-site detection for Hg²⁺.

A Comprehensive Review on Water Quality Monitoring Devices: Materials Advances, Current Status, and Future Perspective

Water quality monitoring has become more critical in recent years to ensure the availability of clean and safe water from natural aquifers and to understand the evolution of water contaminants across time and space. The conventional water monitoring techniques comprise of sample collection, preservation, preparation, tailed by laboratory testing and analysis with cumbersome wet chemical routes and expensive instrumentation. Despite the high accuracy of these methods, the high testing costs, laborious procedures, and maintenance associated with them don't make them lucrative for end end-users and field testing. As the participation of ultimate stakeholders, that is, common man for water quality and quantity can play a pivotal role in ensuring the sustainability of our aquifers, thus it is essential to develop and deploy portable and user-friendly technical systems for monitoring water sources in real-time or on-site. The present review emphasizes here on possible approaches including optical (absorbance, fluorescence, colorimetric, X-ray fluorescence, chemiluminescence), electrochemical (ASV, CSV, CV, EIS, and chronoamperometry), electrical, biological, and surface-sensing (SPR and SERS), as candidates for developing such platforms. The existing developments, their success, and bottlenecks are discussed in terms of various attributes of water to escalate the essentiality of water quality devices development meeting ASSURED criterion for societal usage. These platforms are also analyzed in terms of their market potential, advancements required from material science aspects, and possible integration with IoT solutions in alignment with Industry 4.0 for environmental application.

Novel Latex Microsphere Immunochromatographic Assay for Rapid Detection of Cadmium Ion in Asparagus

Recently, concerns about heavy metal cadmium ion (Cd²⁺) residue in asparagus have been frequently reported, and there is an urgent need to develop an effective, sensitive, and rapid detection method for Cd²⁺. In this study, we innovatively combined molecular microbiology to carry out the comparative screening of Cd²⁺ chelators in a green, efficient, and specific way. The knock-out putative copper-transporter gene (pca1Δ) yeast strain with high sensitivity to Cd²⁺ was first used to screen the Cd²⁺ chelator, and the optimum chelator 1-(4-Isothiocyanatobenzyl)ethylenediamine-N,N,N,N′-tetraacetic acid (ITCBE) was obtained. Additionally, a rapid latex microsphere immunochromatographic assay (LMIA) was developed, based on the obtained monoclonal antibody (mAb) with high specificity and high affinity (affinity constant Ka = 1.83 × 10¹⁰ L/mol), to detect Cd²⁺ in asparagus. The 50% inhibitive concentration (IC₅₀) of test strip was measured to be 0.2 ng/mL, and the limit of detection (IC₁₀) for qualitative (LOD, for visual observation) and quantitative detection (LOQ, for data simulation) of the test strip was 2 ng/mL and 0.054 ng/mL, respectively. In all, the developed mAb-based LMIA shows a great potential for monitoring Cd²⁺ in asparagus, even in vegetable samples.

Selective Plate-Based Assay for Trace EDTA Analysis via Boron Trifluoride-methanol Derivatization UHPLC-QqQ-MS/MS Enabling Biologic and Vaccine Processes

The employment of ethylenediaminetetraacetic acid (EDTA) across several fields in chemistry and biology has required the creation of a high number of quantitative assays. Nonetheless, the determination of trace EDTA, especially in biologics and vaccines, remains challenging. Herein, we introduce an automated high-throughput approach based on EDTA esterification in 96-well plates using boron trifluoride-methanol combined with rapid analysis by ultra-high-performance liquid chromatography-triple quadrupole tandem mass spectrometry (UHPLC-QqQ-MS/MS). Derivatization of EDTA to its methyl ester (Me-EDTA) serves to significantly improve chromatographic performance (retention, peak shape, and selectivity), while also delivering a tremendous enhancement of sensitivity in the positive ion mode electrospray ionization (ESI+). This procedure, in contrast to previous EDTA methods based on complexation with metal ions, is not affected by high concentration of other metals, buffers, and related salts abundantly present in biopharmaceutical processes (e.g., iron, copper, citrate, etc.). Validation of this assay for the determination of ng·mL^-1 level EDTA in monoclonal antibody and vaccine products demonstrated excellent performance (repeatability, precision, and linear range) with high recovery from small sample volumes while also providing an advantageous automation-friendly workflow for high-throughput analysis.

Recent advances of fluorescent biosensors based on cyclic signal amplification technology in biomedical detection

The cyclic signal amplification technology has been widely applied for the ultrasensitive detection of many important biomolecules, such as nucleic acids, proteins, enzymes, adenosine triphosphate (ATP), metal ions, exosome, etc. Due to their low content in the complex biological samples, traditional detection methods are insufficient to satisfy the requirements for monitoring those biomolecules. Therefore, effective and sensitive biosensors based on cyclic signal amplification technology are of great significance for the quick and simple diagnosis and treatment of diseases. Fluorescent biosensor based on cyclic signal amplification technology has become a research hotspot due to its simple operation, low cost, short time, high sensitivity and high specificity. This paper introduces several cyclic amplification methods, such as rolling circle amplification (RCA), strand displacement reactions (SDR) and enzyme-assisted amplification (EAA), and summarizes the research progress of using this technology in the detection of different biomolecules in recent years, in order to provide help for the research of more efficient and sensitive detection methods.

Disposable Paper-Based Biosensors for the Point-of-Care Detection of Hazardous Contaminations-A Review

The fast detection of trace amounts of hazardous contaminations can prevent serious damage to the environment. Paper-based sensors offer a new perspective on the world of analytical methods, overcoming previous limitations by fabricating a simple device with valuable benefits such as flexibility, biocompatibility, disposability, biodegradability, easy operation, large surface-to-volume ratio, and cost-effectiveness. Depending on the performance type, the device can be used to analyze the analyte in the liquid or vapor phase. For liquid samples, various structures (including a dipstick, as well as microfluidic and lateral flow) have been constructed. Paper-based 3D sensors are prepared by gluing and folding different layers of a piece of paper, being more user-friendly, due to the combination of several preparation methods, the integration of different sensor elements, and the connection between two methods of detection in a small set. Paper sensors can be used in chromatographic, electrochemical, and colorimetric processes, depending on the type of transducer. Additionally, in recent years, the applicability of these sensors has been investigated in various applications, such as food and water quality, environmental monitoring, disease diagnosis, and medical sciences. Here, we review the development (from 2010 to 2021) of paper methods in the field of the detection and determination of toxic substances.

Integrating high-performing electrochemical transducers in lateral flow assay

Lateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA's performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance. Graphical abstract.

Development of immunoassay methods based on monoclonal antibody and its application in the determination of cadmium ion

Owing to the threat of cadmium (Cd²⁺) to public health, it is an urgent demand to develop effective, sensitive, and rapid methods for the detection of cadmium. In this study, indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) and immunochromatographic test strips (ICTS) were established for the determination of Cd²⁺ based on the obtained mAb with high specificity and high affinity (Kaff = 3.0 × 10⁹ L/moL). The linear range of ic-ELISA detection was 0.03-1.11 ng/mL and 50% inhibitive concentration (IC50) of cadmium ion was determined to be 0.15 ng/mL. The visual limit of detection (vLOD) of the AuNS-based strip was 0.375 ng/mL. The vLOD of AuNF-based strip using higher intensity reporter determined to be 0.03 ng/mL, which was enhanced 12 times compared to the traditional strip. In summary, the developed immunoassays based on mAb shows great potential for monitoring the cadmium ion in environmental samples.

Integrating high-performing electrochemical transducers in lateral flow assay

Lateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

Multi-emission metal-organic framework composites for multicomponent ratiometric fluorescence sensing: recent developments and future challenges

Ratiometric fluorescence sensors that are achieved via the ratiometric fluorescence intensity changes of emission peaks based on multi-emission fluorescence probes show a huge advantage. However, the preparation of these multi-emission fluorescence probes is a key challenge, as it is related to having more fluorescence groups with the same excitation but different emission wavelengths, and their assembly is not a simple mixing process. More fluorescent groups or molecules can be assembled into the multi-emission fluorescence probe by covalent bonds and coordination interactions, or by loading in metal-organic frameworks (MOFs). MOFs are excellent candidates for constructing complexes with the capability of multicomponent ratiometric fluorescence sensing, but there are some problems that need to be considered. For example, not all fluorophores can be stably loaded in the MOFs' pores, usually due to the size, surface charge and intrinsic properties of the fluorophore. In turn, it is also related to the structure of the MOF, metal nodes, and properties of the organic ligands. This review first introduces the advantages of the MOF-based multi-component fluorescence sensors, and then discusses the synthesis, classification and application of fluorescent MOFs or MOF composites for multi-component ratiometric fluorescence detection. Particular emphasis is focused on the potential, types and characteristics for sensing and biological applications, and the main challenges and limitations are further explored. This review might be helpful for those researchers interested in the application of multi-component ratiometric fluorescence sensing based on fluorescent MOFs or MOF composites.

Trace analysis on chromium (VI) in water by pre-concentration using a superhydrophobic surface and rapid sensing using a chemical-responsive adhesive tape

Heavy metal ions in water resources present great threats to human health. Chromium (Cr), as the frequently used heavy metal in industrial processes and everyday life, requires a low-cost, fast and effective means to determine its concentration, especially in drinking water. Conventional colorimetric paper-based analytical devices (PADs), due to the limited sensitivity, are unable to quantify the most harmful heavy metal ions to the drinking water standard. In this work, we present a method of using a superhydrophobic (SH) paper to concentrate Cr⁶⁺ from solutions of very low concentration to obtain the precipitated Cr⁶⁺ salt particulates. A known volume of Cr⁶⁺-containing solution was concentrated to "a spot" on the SH paper through drying, so that trace amount of Cr⁶⁺ can be quantified via the application of a specifically-designed chemical-responsive adhesive tape (CAT) sensor, loaded with Cr⁶⁺- specific indicator, on to the concentrated Cr⁶⁺ spot. The detection limit of the SH-CAT method for Cr⁶⁺ is 0.05 mg/L, which is the permitted maximum concentration in drinking water and is significantly lower than that of conventional PADs. The interference and the accuracy studies also show the reliability of this method for measuring trace amounts of analytes.

Quantum dot (QD)-based probes for multiplexed determination of heavy metal ions

Heavy metal contamination is a major global concern and additive toxicity resulting from the exposure to multiple heavy metal ions is more pronounced than that induced by a single metal species. Quantum dots (QDs) have demonstrated unique properties as sensing materials for heavy metal ions over the past two decades. With the rapid development and deep understanding on determination of single heavy metal ion using QD probes, this technology has been employed for sensing multiple metal ions. This review (with 97 refs.) summarizes the progress made in recent years in methods for multiplexed determination of heavy metal ions using QDs. Following an introduction into the importance of simultaneous quantitation of multiple heavy metal ions in environmentally relevant settings, the review discusses the applications of different types of QDs, i.e. chalcogenide, carbon, polymer and graphene in this field. Determination strategies based on fluorometric, colorimetric and electrochemical responses were reviewed including the testing mechanisms and differentiation between various metal ions. In addition, current state of the art sensor constructions, i.e. immobilization of QDs on solid substrate and sensor arrays have been highlighted. A concluding section describes the limitations, opportunities and future challenges of the QD probes. We also compiled a comprehensive table of currently available literature. The listed papers provided information in the following categories, i.e. type of QDs used, ligands or other components in the probe, metal ions tested, medium/substrate of the probe, transduction methods, discrimination mechanism, limit of detection (LOD) and concentration range. Graphic abstract.

Versatile Sensing Platform for Cd2+ Detection in Rice Samples and Its Applications in Logic Gate Computation

A versatile sensing platform was designed for Cd²⁺ detection utilizing Mg²⁺-dependent DNAzyme as the biocatalyst and toehold-mediated strand replacement as the reaction mechanism. The Cd²⁺-aptamer interaction brings the split subunits of the Mg²⁺-dependent DNAzyme into close-enough proximity, which generates an active DNAzyme that can catalyze the cleavage reaction toward the hairpin substrate strand (H1). The trigger DNA fragment in H1 can open another hairpin probe (H2) to activate the cyclic signal amplification process. The generated numerous G-quadruplex DNAzyme structures will produce a high fluorescence response after incubation with the fluorescence dye N-methyl mesoporphyrin IX (NMM). This detection platform is ultrasensitive and the detection limit (LOD) is 2.5 pM (S/N = 3). The sensing system is robust and can work effectively even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples with good reliability. Showing the unique features of simple operation, label-free and enzyme-free format, high sensitivity and selectivity, and universal signal amplification mode, our proposed sensing protocol holds great promise for becoming a competitive alternative for the routine monitoring of Cd²⁺ pollution. Importantly, this flexible and versatile sensing platform was used to construct some exquisite logic gates, including AND, OR, INHIBIT, IMPLICATION, NOR, and NAND.

Disposable Paper-on-CMOS Platform for Real-Time Simultaneous Detection of Metabolites

OBJECTIVE

Early stage diagnosis of sepsis without overburdening health services is essential to improving patient outcomes.

METHODS

A fast and simple-to-use platform that combines an integrated circuit with paper microfluidics for simultaneous detection of multiple-metabolites appropriate for diagnostics was presented. Paper based sensors are a primary candidate for widespread deployment of diagnostic or test devices. However, the majority of devices today use a simple paper strip to detect a single marker using the reflectance of light. However, for many diseases such as sepsis, one biomarker is not sufficient to make a unique diagnosis. In this work multiple measurements are made on patterned paper simultaneously. Using laser ablation to fabricate microfluidic channels on paper provides a flexible and direct approach for mass manufacture of disposable paper strips. A reusable photodiode array on a complementary metal oxide semiconductor chip is used as the transducer.

RESULTS

The system measures changes in optical absorbance in the paper to achieve a cost-effective and easily implemented system that is capable of multiple simultaneous assays. Potential sepsis metabolite biomarkers glucose and lactate have been studied and quantified with the platform, achieving sensitivity within the physiological range in human serum.

CONCLUSION

We have detailed a disposable paper-based CMOS photodiode sensor platform for real-time simultaneous detection of metabolites for diseases such as sepsis.

SIGNIFICANCE

A combination of a low-cost paper strip with microfluidic channels and a sensitive CMOS photodiode sensor array makes our platform a robust portable and inexpensive biosensing device for multiple diagnostic tests in many different applications.

On-site detection of heavy metals in wastewater using a single paper strip integrated with a smartphone

A field paper-based heavy metal strip was designed and implemented for simultaneous detection of the heavy metals Zn, Cr, Cu, Pb and Mn in wastewater samples. The colorimetric paper strip was fabricated by drop-casting of chromogenic reagents onto detection zones. When the fabricated paper strip was exposed to Zn, Cr, Cu, Pb and Mn, multiple colors appeared that were then recorded with a smartphone followed by processing in the Color Picker application. After optimizing the analytical parameters, such as the chromogenic concentration, pH and reaction time, the paper strip achieved detection limits of 0.63, 0.07, 0.17, 0.03 and 0.11 mg/L for Zn, Cr, Cu, Pb and Mn, respectively. Five heavy metals analyses were able to be performed within 1 min on one paper strip. This paper strip is accurate with recoveries from 87 to 107%. The results of the proposed paper strip correlated well with those determined by inductively coupled plasma-optical emission spectrometry of wastewater samples. The use of a single paper strip integrated with a smartphone for the detection of five heavy metals in wastewater represents an all-in-one device with on-site detection, leading to cost-effective and rapid assays that show a great application potential for on-site environmental monitoring. Graphical abstract.

Lateral flow biosensors based on the use of micro- and nanomaterials: a review on recent developments

This review (with 187 refs.) summarizes the progress that has been made in the design of lateral flow biosensors (LFBs) based on the use of micro- and nano-materials. Following a short introduction into the field, a first section covers features related to the design of LFBs, with subsections on strip-based, cotton thread-based and vertical flow- and syringe-based LFBs. The next chapter summarizes methods for sample pretreatment, from simple method to membrane-based methods, pretreatment by magnetic methods to device-integrated sample preparation. Advances in flow control are treated next, with subsections on cross-flow strategies, delayed and controlled release and various other strategies. Detection conditionst and mathematical modelling are briefly introduced in the following chapter. A further chapter covers methods for reliability improvement, for example by adding other validation lines or adopting different detection methods. Signal readouts are summarized next, with subsections on color-based, luminescent, smartphone-based and SERS-based methods. A concluding section summarizes the current status and addresses challenges in future perspectives. Graphical abstractRecent development and breakthrough points of lateral flow biosensors.

An enzyme-free DNA circuit for the amplified detection of Cd2+ based on hairpin probe-mediated toehold binding and branch migration

An enzyme-free DNA circuit was designed for the amplified detection of Cd2+ based on hairpin probe-mediated toehold binding and branch migration. A Cd2+-specific aptamer was used to recognize Cd2+ and a G-quadruplex was used to report the detection signal. The assay is sensitive, with a detection limit of 5 pM.

Naked-Eye Heterogeneous Sensing of Fluoride Ions by Co-Polymeric Nanosponge Systems Comprising Aromatic-Imide-Functionalized Nanocellulose and Branched Polyethyleneimine

Heterogeneous colorimetric sensors for fluoride ions were obtained by cross-linking TEMPO-oxidized cellulose nanofibers (TOCNF) with chemically modified branched polyethyleneimine 25 kDa (bPEI). Functionalization of bPEI primary amino groups with aromatic anhydrides led to the formation of the corresponding mono- and bis-imides on the grafted polymers (f-bPEI). A microwave-assisted procedure allowed the optimization of the synthetic protocol by reducing reaction time from 17 h to 30 minutes. Hydrogels obtained by mixing different ratios of TOCNF, bPEI and f-bPEI were lyophilized and thermally treated at about 100 °C to promote the formation of amide bonds between the amino groups of poly-cationic polymers and the carboxylic groups of cellulose nanofibers. This approach generated a series of cellulose nanosponges S1-S3 which were characterized by FT-IR and by solid state ¹³ C CPMAS NMR. These sponge materials can act as colorimetric sensors for the selective naked-eye recognition of fluoride ions over chloride, phosphate and acetate ions at concentrations of up to 0.05 M in DMSO. Moreover, when the sponges were functionalized with perylene tetracarboxylic diimide, successful naked-eye detection was achieved with only 0.02 % w/w of chromophore units per gram of material.

Disposable Sensors in Diagnostics, Food, and Environmental Monitoring

Disposable sensors are low-cost and easy-to-use sensing devices intended for short-term or rapid single-point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource-limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo- and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low-cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.

Uranium (VI) detection in groundwater using a gold nanoparticle/paper-based lateral flow device

The contamination in groundwater due to the presence of uranium is nowadays a subject of concern due to the severe health problems associated with renal failure, genotoxicity and cancer. The standard methods to detect uranium require time-consuming processes and expensive non-portable equipment, so these measurements are rarely performed in-field, which increases the time until water samples are analysed. Furthermore, the few portable methods available do not allow quantitative analysis and the detection limit is often not low enough to reach the recommendations for drinking water (30 ppb or 126 nM of uranium). For the first time, we propose a portable, fast, inexpensive and sensitive paper-based biosensor able to detect in situ U(VI) in water samples: U(VI) selective gold nanoparticle-based lateral flow strips. Antibody-coated gold nanoparticles are used as labels in the proposed lateral flow system because of their biocompatibility; in addition, these nanoparticles provide high sensitivity due to their intense plasmonic effect. The antibody used in the assay recognizes soluble U(VI) complexed to the chelator, 2,9-dicarboxyl-1,10-phenanthroline (DCP). Because of the small size of the U(VI)-DCP complex, this assay employs a competitive format that reaches a limit of detection of 36.38 nM, lower than the action level (126 nM) established by the World Health Organization and the U.S. Environmental Protection Agency for drinking waters.

Fluorescence turn-on sensing of trace cadmium ions based on EDTA-etched CdTe@CdS quantum dot

Cadmium-caused environmental pollution and diseases have always been worldwide problems. Thus it is extremely urgent to establish a cheap, rapid, simple and selective detection method for trace cadmium in drinking water. In this study, a fluorescence "turn-on" method based on ethylene diamine tetraacetic acid (EDTA)-etched CdTe@CdS quantum dots (QDs) was designed to detect Cd²⁺. High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) were utilized for chemical and structural characterization of the as-prepared QDs. Based on chemical etching of EDTA on the surface of CdTe@CdS QDs, specific Cd²⁺ recognition sites were produced, and then results in fluorescence quenching. The introduction of Cd²⁺ could identify these sites and restore the fluorescence of the EDTA-QDs system. Under the optimum conditions, the nanoprobe shows a linear response range from 0.05 to 9 μM with a very low detection limit of 0.032 μM. In addition, the reported fluorescence probe in this work displays a good selectivity for trace Cd²⁺ over other metal ions and an admirable practicability in real water samples.

Enhancing the sensitivity of colorimetric lateral flow assay (CLFA) through signal amplification techniques

Colorimetric lateral flow assay (CLFA) is one of a handful of diagnostic technologies that can be truly taken out of the laboratory for point-of-care testing without the need for any equipment and skilled personnel. Despite its simplicity and practicality, it remains a grand challenge to substantially enhance the detection sensitivity of CLFA without adding complexity. Such a limitation in sensitivity inhibits many critical applications such as early detection of significant cancers and severe infectious diseases. With the rapid development of materials science and nanotechnology, signal amplification techniques that hold great potential to break through the existing detection limit barrier of CLFA have been developed in recent years. This article specifically highlights these emerging techniques for CLFA development. The rationale behind and advantages and limitations of each technique are discussed. Perspectives on future research directions in this niche and important field are provided.

Paper-Based Sensor Chip for Heavy Metal Ion Detection by SWSV

Heavy metal ion pollution problems have had a terrible influence on human health and the environment. Therefore, the monitoring of heavy metal ions is of great practical significance. In this paper, an electrochemical three-electrode system was fabricated and integrated on nitrocellulose membrane (NC) by the use of magnetron sputtering technology, which exhibited a uniform arrangement of porous structure without further film modification. This paper-based sensor chip was used for Cu²⁺ detection by square-wave stripping voltammetry (SWSV). Within the ranges of 5–200 μg·L⁻¹ and 200–1000 μg·L⁻¹, it showed good linearity of 99.58% and 98.87%, respectively. The limit of detection was 2 μg·L⁻¹. On the basis of satisfying the detection requirements (10 μg·L⁻¹), the integrated sensor was small in size and inexpensive in cost. Zn²⁺, Cd²⁺, Pb²⁺ and Bi³⁺ were also detected by this paper-based sensor chip with good linearity.

Highly Sensitive Paper-based Analytical Devices with the Introduction of a Large-Volume Sample via Continuous Flow

The implementation of continuous flow in paper-based analytical devices (PADs) was challenging because of the large-volume introduction that was created; but this allowed for the development of novel types of PADs for preconcentration, separation, and sensitive detection. In this study, pump-free continuous flow was applied to a distance-based PAD for the determination of iron ions. Continuous flow enabled the introduction of a volume that exceeded what was necessary to fill the hydrophilic channel of a PAD. Thus, this continuous-flow method significantly improved both the limits of detection (LOD) and the limits of quantification (LOQ) for a distance-based PAD by increasing the sample volume that could be introduced into the PAD. The values for LOD and LOQ were 20 and 26 ppb, respectively, which were more than 150-times lower than that obtained using a small sample volume (50 μL), and were comparable to those of inductively coupled plasma-atomic emission spectrometry. The continuous-flow technique was applicable to the determination of iron ions at levels of several tens of ppb in natural water without preconcentration.

Fluorescence quenching-based signal amplification on immunochromatography test strips for dual-mode sensing of two biomarkers of breast cancer

Recently, immunochromatography test strips (ICTS) have been fully developed for point-of-care testing (POCT). However, the intrinsic limitations including non-quantitative detection of colloidal gold ICTS and low sensitivity of fluorescence ICTS (FICTS) significantly restrict their further application in clinical diagnosis. Taking advantages of rapid colorimetric qualitative detection and fluorescence quantitation, we designed a kind of sensitive and dual-mode magnetic FICTS (mFICTS) based on PLGA@Fe3O4 super-paramagnetic nanosphere (SPMN) probes quenching multiplex fluorescer on the test line through sandwich immunoreactions. Owing to the large number of Fe₃O₄ nanoparticles (about 47) encapsulated in one SPMN, about 2680 Cy5 molecules were quenched by one SPMN on the test line such that to significantly improve the analytical sensitivity as well as the detection of whole blood samples via magnetic separation. Moreover, the aggregation of black SPMN on the test line enabled a quick naked-eye screening in 3 min. For high accuracy breast cancer diagnosis, combined determination of carcinoembryonic antigen (CEA) and carbohydrate antigen (CA153) was performed on one mFICTS with the limits of detection of about 0.06 ng mL^-1 and 0.09 U mL^-1, respectively. Then, more than 50 clinical serum samples were investigated for high-resolution screening by mFICTS, and the results were coincident with those obtained by electrochemiluminescence immunoassay (ECLIA). Thus, the designed mFICTS is suitable for point-of-care diagnostics.

An All-Integrated Anode via Interlinked Chemical Bonding between Double-Shelled-Yolk-Structured Silicon and Binder for Lithium-Ion Batteries

The concept of an all-integrated design with multifunctionalization is widely employed in optoelectronic devices, sensors, resonator systems, and microfluidic devices, resulting in benefits for many ongoing research projects. Here, maintaining structural/electrode stability against large volume change by means of an all-integrated design is realized for silicon anodes. An all-integrated silicon anode is achieved via multicomponent interlinking among carbon@void@silica@silicon (CVSS) nanospheres and cross-linked carboxymethyl cellulose and citric acid polymer binder (c-CMC-CA). Due to the additional protection from the silica layer, CVSS is superior to the carbon@void@silicon (CVS) electrode in terms of long-term cyclability. The as-prepared all-integrated CVSS electrode exhibits high mechanical strength, which can be ascribed to the high adhesivity and ductility of c-CMC-CA binder and the strong binding energy between CVSS and c-CMC-CA, as calculated based on density functional theory (DFT). This electrode exhibits a high reversible capacity of 1640 mA h g^-1 after 100 cycles at a current density of 1 A g^-1 , high rate performance, and long-term cycling stability with 84.6% capacity retention after 1000 cycles at 5 A g^-1 .

Integrated ion imprinted polymers-paper composites for selective and sensitive detection of Cd(II) ions

Paper-based sensor is a new alternative technology to develop a portable, low-cost, and rapid analysis system in environmental chemistry. In this study, ion imprinted polymers (IIPs) using cadmium ions as the template were directly grafted on the surface of low-cost print paper based on the reversible addition-fragmentation chain transfer polymerization. It can be applied as a recognition element to selectively capture the target ions in the complex samples. The maximum adsorption capacity of IIPs composites was 155.2mgg^-1 and the imprinted factor was more than 3.0. Then, IIPs-paper platform could be also applied as a detection element for highly selective and sensitive detection of Cd(II) ions without complex sample pretreatment and expensive instrument, due to the selective recognition, formation of dithizone-cadmium complexes and light transmission ability. Under the optimized condition, the linear range was changed from 1 to 100ngmL^-1 and the limit of detection was 0.4ngmL^-1. The results were in good agreement with the classic ICP-MS method. Furthermore, the proposed method can also be developed for detection of other heavy metals by designing of new IIPs.