Simultaneous Determination of 13 Fluoroquinolone and 22 Sulfonamide Residues in Milk by a Dual-Colorimetric Enzyme-Linked Immunosorbent Assay

Isolation of aptamers with excellent cross-reactivity and specificity to sulfonamides towards a ratiometric fluorescent aptasensor for the detection of nine sulfonamides in seafood

Sulfonamides (SAs) is a class of antibiotics that extensively used for treating infectious diseases in livestock industries and aquaculture. Thus, it is urgent need to obtain the bio-receptor, which has excellent cross-reactivity and specificity to SAs, for developing high-throughput methods for the determination of multiple SAs even all commonly-used SAs, to realize the quick screening/detection of total SAs in animal-derived foods. We herein isolated several SAs-specific cross-reactive aptamers by using a library-immobilized SELEX with multi-SAs parallel selection strategy. Two of the isolated aptamers (Sul-01 and Sul-04) can specifically recognize and bind seven SAs respectively with higher binding affinity and no interference of non-sulfonamide antibiotics, and thus can be applied as bio-receptors for developing high-throughput aptasensors for the quick screening/detection of multiple SAs. By using the mixture of Sul-01 and Sul-04 as bio-receptor, a ratiometric fluorescent aptasensor was created for the quick detection of nine SAs including sulfamethoxydiazine (SMD), sulfapyridine (SPD), sulfaquinoxaline (SQ), sulfathiazole (ST), sulfamonomethoxine (SMM), sulfamerazine (SMR), sulfaguanidine (SG), sulfamethazine (SMZ) and sulfadiazine (SD) with a detection limit (LOD) of 0.10-0.50 μM, or total of above nine SAs with a LOD of 0.20 μM. The fluorescent aptasensor was successfully applied to detect each or total of SMD, SPD, SQ, ST, SMM, SMR, SG, SMZ and SD in fish samples with a recovery of 83 %-92 % and a relative standard deviation (RSD, n = 5) < 5 %. This study not only provided several promising bio-receptors for the development of diverse high-throughput aptasensors to achieve the quick screening of multiple SAs residues, but also provided a simple, stable and sensitive method for the quick screening of SMD, SPD, SQ, ST, SMM, SMR, SG, SMZ and SD in seafood.

The determination of 11 sulfonamide antibiotics in water and foods by developing a N-rich magnetic covalent organic framework combined with ultra-high performance liquid chromatography-tandem mass spectrometry

The concentration of antibiotic residues in water and animal-derived foods is low and the matrix is complex, and effective extraction of antibiotic residues in them is a key factor for accurate quantification. It is important to establish a rapid and effective method for the analytical determination of antibiotics in water and foods. In this study, a type of novel magnetic COF (Fe3O4@SiO2@PDE-TAPB-COF) was synthesized and characterized. Moreover, Fe3O4@SiO2@PDE-TAPB-COF combined with ultra-high performance liquid chromatography-tandem mass spectrometry was used to determine the 11 sulfonamide antibiotics (SAs) in water and food. The parameters including pH, adsorption amount, adsorption time, type of elution solvent and elution time were optimized. Under the optimal conditions, the standard curves of 11 SAs showed good linearity (R 2 > 0.999) in their respective concentration ranges and had lower detection and quantification limits. The spiked recoveries of the developed MSPE-UPLC-MS/MS method for the 11 SAs in water and foods were 74.3-107.2% and 75.1-102.5%, respectively. And the relative standard deviations (RSDs) were less than 9.56% (n = 7). The results indicated that the method can be used for the determination of SAs in foods and water with low detection limits and high sensitivity.

Screening of Cross-Reactive Aptamers for the Detection of 24 Quinolones by Using a Liebig's Law-Guided Parallel-Series Strategy

Quinolones, a widely used class of antibiotics, present significant environmental and health concerns if they excessively remain in the environment and in food. Aptamers specific to quinolones can be applied as bioreceptors for the detection of quinolone residues in the environment and food. The quinolone family contains dozens of different individuals that share the same core structure coupled with various substituents at six different positions. The diversity and complexity of the substitution sites make it a challenge to choose a set of representative molecules that encompass all the desired sites and preserve the core molecular framework for the screening of quinolone-specific aptamers via systematic evolution of ligands by exponential enrichment (SELEX). To address this challenge, we introduce a novel parallel-series strategy guided by Liebig's law for isolating quinolone-specific cross-reactive aptamers by using the library-immobilized SELEX method. Through this approach, we successfully identified 5 aptamers (Apt.AQ01-Apt.AQ05) with high binding affinity and excellent specificity to 24 different quinolone individuals. Among them, Apt.AQ03 showcased optimal performance with affinities ranging from 0.14 to 1.07 μM across the comprehensive set of 24 quinolones, exhibiting excellent specificity against nontarget interferents. The binding performance of Apt.AQ03 was further characterized with microscale thermophoresis, circular dichroism spectra, and an exonuclease digestion assay. By using Apt.AQ03 as a bioreceptor, a fluorescence resonance energy transfer (FRET) aptasensor was developed for the detection of 24 quinolones in milk, achieving a remarkable detection limit of 14.5-21.8 ng/mL. This work not only establishes a robust and effective strategy for selecting cross-reactive aptamers applicable to other small-molecule families but also provides high-quality aptamers for developing various high-throughput and reliable methods for the detection of multiple quinolone residues in food.

Veterinary Drug Residues in the Food Chain as an Emerging Public Health Threat: Sources, Analytical Methods, Health Impacts, and Preventive Measures

Veterinary medications are necessary for both contemporary animal husbandry and food production, but their residues can linger in foods obtained from animals and pose a dangerous human risk. In this review, we aim to highlight the sources, occurrence, human exposure pathways, and human health effects of drug residues in food-animal products. Following the usage of veterinary medications, pharmacologically active compounds known as drug residues can be found in food, the environment, or animals. They can cause major health concerns to people, including antibiotic resistance development, the development of cancer, teratogenic effects, hypersensitivity, and disruption of normal intestinal flora. Drug residues in animal products can originate from variety of sources, including water or food contamination, extra-label drug use, and ignoring drug withdrawal periods. This review also examines how humans can be exposed to drug residues through drinking water, food, air, and dust, and discusses various analytical techniques for identifying these residues in food. Furthermore, we suggest some potential solutions to prevent or reduce drug residues in animal products and human exposure pathways, such as implementing withdrawal periods, monitoring programs, education campaigns, and new technologies that are crucial for safeguarding public health. This review underscores the urgency of addressing veterinary drug residues as a significant and emerging public health threat, calling for collaborative efforts from researchers, policymakers, and industry stakeholders to develop sustainable solutions that ensure the safety of the global food supply chain.

A group-targeting biosensor for sensitive and rapid detection of quinolones in water samples

BACKGROUND

Quinolones (QNs) widely exist in the environment due to their wide range of applications and poor metabolic properties, resulting in the generation and spread of resistance genes, posing a potential threat to human health. Traditional analytical methods cannot detect all broad ranges of QNs simultaneously. The development of facile, efficient and reliable method for quantification and assessment of the total QNs is a long-lasting challenge.

RESULTS

We hereby provide a simple, sensitive and instantaneous group-targeting biosensor for the detection of total QNs in environmental water samples. The biosensor is based on a group-specific antibodies with high affinity against QNs. Fluorescent labeled antibodies bound to the coated antigen modified on the surface of the transducer, and excited by the evanescent waves. The detected fluorescent signal is inversely proportional to the QNs concentration. This biosensor exhibited excellent performance with detection limits lower than 0.15 μg L-1 for all five QNs variants, and even lower than 0.075 μg L-1 for ciprofloxacin (CIP) and ofloxacin (OFL). Environmental water samples can be detected after simple pretreatment, and all detection steps can be completed in 10 min. The transducer has a high regenerative capacity and shows no significant signal degradation after two hundred detection cycles. The recoveries of QNs in a variety of wastewater range from 105 to 119%, confirming its application potential in the measurement of total QNs in reality.

SIGNIFICANCE

The biosensor can realize rapid and sensitive detection of total QNs in water samples by simple pretreatment, which overcomes the disadvantage of the traditional methods that require complex pretreatment and time-consuming, and pave the groundwork for expansive development centered around this technology.

Development of Optical Differential Sensing Based on Nanomaterials for Biological Analysis

The discrimination and recognition of biological targets, such as proteins, cells, and bacteria, are of utmost importance in various fields of biological research and production. These include areas like biological medicine, clinical diagnosis, and microbiology analysis. In order to efficiently and cost-effectively identify a specific target from a wide range of possibilities, researchers have developed a technique called differential sensing. Unlike traditional "lock-and-key" sensors that rely on specific interactions between receptors and analytes, differential sensing makes use of cross-reactive receptors. These sensors offer less specificity but can cross-react with a wide range of analytes to produce a large amount of data. Many pattern recognition strategies have been developed and have shown promising results in identifying complex analytes. To create advanced sensor arrays for higher analysis efficiency and larger recognizing range, various nanomaterials have been utilized as sensing probes. These nanomaterials possess distinct molecular affinities, optical/electrical properties, and biological compatibility, and are conveniently functionalized. In this review, our focus is on recently reported optical sensor arrays that utilize nanomaterials to discriminate bioanalytes, including proteins, cells, and bacteria.

Biomass carbon and Ti2C3MXene quantum dots as ratiometric fluorescent probes for sensitive detecting malachite green in fish sample

A visual detection method for malachite green (MG) in food was established based on 'double-response-OFF' ratiometric fluorescent paper-based sensor. Biomass carbon quantum dots (BCQDs) using broad bean shell, and Ti3C2MXene quantum (MQDs) dots modified by ethylenediamine were synthesized by solvothermal method. The MG and two kinds of quantum dots could undergo static quenching, and the fluorescence color of two kinds of quantum dots gradually changed from red to blue, eventually the fluorescence was quenched, and the pattern had a two-stage linear relationship using fluorescent spectrofluorometer in the range of 0.1-140.0μM and the detection limit of 0.07μM. On this basis, a BCQDs/MQDs ratiometric fluorescence paper-based sensor was constructed and applied to fish sample. Through mobile phone software-Color recognizer, RGB values of fluorescent paper-based sensor at various concentrations of MG were extracted. The results showed that MG concentration was linearly correlated withR' value of RGB in the range of 20.0-140.0μM with 16.5μM detection limit. The method had been applied to the determination of canned fish and fresh basa fish samples, and the recovery rates were 97.33%-108.93% and 96.04%-117.97%, respectively. It proved that the ratiometric fluorescent paper-based sensor could be used for the rapid visual quantitative detecting MG in real samples.

Current analytical strategies for the determination of quinolone residues in milk

Quinolones are potent antibacterial drugs extensively utilized for treating bacterial infections in poultry. However, the presence of quinolone antibiotic residues in milk is a matter of concern due to potential health risks and adverse effects on milk quality. This review provides an overview of current analytical strategies for the determination of quinolone residues in milk. Various sample preparation techniques, such as liquid-phase extraction, solid-phase extraction and QuEChERS, are discussed, along with detection methods including instrument-based detection, immune-based detection, and microbial detection. The advantages and limitations of each method are highlighted, as well as their applicability in different stages of milk production. Additionally, recent advancements in sample preparation and detection methods are presented. This comprehensive review aims to contribute to the development of accurate and reliable methods for the detection of quinolone residues in milk, ensuring the safety and quality of dairy products.

Electrospun nanofiber-based indicatorpaper sensing platform for fluorescence and visualization detection of norfloxacin

Norfloxacin (NOR) residues in water pose a serious threat to human health via the food chain, necessitating the development of a rapid on-site antibiotic detection technique. In this work, we utilize electrostatic spinning technology that combines polyacrylonitrile (PAN) fibers and adenosine triphosphate (ATP)-rare earth metal Tb3+ complexes (ATP/Tb) to construct a new ternary film-based sensor for sensitive, quick, and convenient field testing of NOR in water. The operating mechanism is that the ternary system produces gradually enhanced bright green fluorescence at increasing concentrations of NOR. The unique fluorescence property of the ternary systems is attributed to the use of ATP, rather than the commonly used adenosine monophosphate (AMP), to coordinate with Tb3+, which avoided the possible fluorescence quenching from competitive water binding. Benefiting from the PAN nanofiber's superior stability, acid, and alkali resistance, and flexibility as support, the ternary system exhibited a good linear response to NOR in a wide dynamic range of 0.04-30 μM at the detection limit of 16 nM. Additionally, the combination of a smartphone color recognition app allows for quick on-scene NOR detection. This film sensing strategy is instructive for the development of smart and portable sensing platforms for real-time detection of analytes such as antibiotics, pesticide residues, and hazardous materials in water bodies.

Overview on the Development of Alkaline-Phosphatase-Linked Optical Immunoassays

The drive to achieve ultrasensitive target detection with exceptional efficiency and accuracy requires the advancement of immunoassays. Optical immunoassays have demonstrated significant potential in clinical diagnosis, food safety, environmental protection, and other fields. Through the innovative and feasible combination of enzyme catalysis and optical immunoassays, notable progress has been made in enhancing analytical performances. Among the kinds of reporter enzymes, alkaline phosphatase (ALP) stands out due to its high catalytic activity, elevated turnover number, and broad substrate specificity, rendering it an excellent candidate for the development of various immunoassays. This review provides a systematic evaluation of the advancements in optical immunoassays by employing ALP as the signal label, encompassing fluorescence, colorimetry, chemiluminescence, and surface-enhanced Raman scattering. Particular emphasis is placed on the fundamental signal amplification strategies employed in ALP-linked immunoassays. Furthermore, this work briefly discusses the proposed solutions and challenges that need to be addressed to further enhance the performances of ALP-linked immunoassays.

Indirect Competitive Enzyme-Linked Immunosorbent Assay Based on Broad-Spectrum Antibody for Simultaneous Determination of Thirteen Fluoroquinolone Antibiotics in Rana catesbeianus

Fluoroquinolone (FQ) is a type of widely used antibiotic in agriculture and aquaculture, and exposure to low doses of FQs may result in the transfer of resistance between animal and human pathogens. Based on the optimization of the operating parameters, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) standard curve was constructed for the simultaneous detection of 13 FQs, including enrofloxacin (ENR), ciprofloxacin (CIP), sarafloxacin (SAR), ofloxacin (OFL), norfloxacin (NOR), pefloxacin mesylate (PM), pefloxacin (PEF), enoxacin (ENX), marbofloxacin (MAR), fleroxacin (FLE), lomefloxacin (LOM), danofloxacin (DAN), and difloxacin (DIF). The limit of detection (LOD, computed as IC₁₀) and sensitivity (IC₅₀) of the ic-ELISA for ENR were 0.59 μg/L and 19.23 μg/L, respectively. The precision and dependability of the detection results of this ic-ELISA were properly verified by HPLC in Rana catesbeianus samples. This indicated that the established ic-ELISA approach could be utilized to determine the FQs in Rana catesbeianus. In addition, this ic-ELISA, based on a broad-spectrum antibody, provides a technical reference and potential strategy for an immunoassay of hazard factors with similar structure.

Lanthanide bimetallic MOF-based fluorescent sensor for sensitive and visual detection of sulfamerazine and malachite

A lanthanide terbium/europium metal-organic framework (Tb_0.6Eu_0.4-MOF) was prepared by one-step solvothermal method at room temperature. A series of characterizations including scanning electron microscopy, powder X-ray diffraction spectra, Fourier transform infrared spectra and X-ray photoelectron spectroscopy were carried out to clarify the physical characteristics of the synthesized material. The data clarified that the prepared Tb_0.6Eu_0.4-MOF possessed rod-like morphology with a width of 1-2 μm, and had good crystal structure, good stability, response speed and excitation-independent emission feature. The bunchy Tb_0.6Eu_0.4-MOF was then used to construct fluorescent sensors for rapid identification of malachite green and sulfamerazine. It was revealed that the detection mechanism was inner filter effect. The effects of different parameters such as excitation wavelength and incubation times were investigated on the fluorescence analysis performance. The data clarified that the optimal excitation wavelength and incubation time was 240 nm and 3 min, respectively. The detection platform exhibited the high sensitivity and selectivity toward malachite green in the linear range of 2-180 μM and determined limit of detection was 1.12 μM. Besides, the proposed sensor allowed sensitive detection of sulfamerazine in the linear range of 2-140 μM with a low detection limit of 0.1 μM. Meaningfully, a smartphone application was designed to assist the proposed sensor to realize visual, intelligent and rapid detection of malachite green and sulfamerazine. Furthermore, the practical application of the proposed sensor has been also verified by high performance liquid chromatography, showing good accuracy, sensitivity and satisfactory recoveries. The results suggested that the Tb_0.6Eu_0.4-MOF-based ratiometric fluorescent sensor had the potential to become a promising technique for rapid detection of malachite green or sulfamerazine with smartphone application. Therefore, the prepared Tb_0.6Eu_0.4-MOF is one kind of efficient and cost-effective potential materials for developing fluorescent sensor for rapid, sensitive and selective detection of sulfamerazine and malachite.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Broad-Specificity Aptamer of Sulfonamides: Isolation and Its Application in Simultaneous Detection of Multiple Sulfonamides in Fish Sample

Sulfonamide antibiotics (SAs) are widely used in animal husbandry and aquaculture, and the excess residues of SAs in animal-derived foods will harm the health of consumers. In reality, various SAs were alternately used in animal husbandry and aquaculture, and thus, it is urgent need to develop simple and high-throughput methods for simultaneously detecting multiple SAs or groups of SAs in order to realize rapid screening of total SAs residues in animal-derived foods. We herein isolated a broad-specificity aptamer for SAs by using a multi-SAs systematic evolution of ligands by exponential enrichment (SELEX) strategy. The isolated broad-specificity aptamer has a higher binding affinity to five different SAs including sulfaquinoxaline (SQ), sulfamethoxypyridazine (SMPZ), sulfametoxydiazine (SMD), sulfachloropyridazine (SCP), and sulfapyridine (SPD) and, thus, can be used as a bioreceptor for developing various high-throughput methods for the simultaneous detection or rapid screening of above five SAs. Based on the isolated broad-specificity aptamer and Cy7 (diethylthiatricarbocyanine) displacement strategy, a colorimetric aptasensor was developed for the simultaneous detection of SQ, SMPZ, SMD, SCP, and SPD with a visual detection limit of 2.0-5.0 μM and a spectrometry detection limit of 0.2-0.5 μM. The colorimetric aptasensor was successfully used to detect SQ, SMPZ, SMD, SCP, and SPD in fish muscle with a recovery of 82%-92% and a RSD (n = 5) < 7%. The success of this study provided a promising bioreceptor for developing various high-throughput methods for on-site rapid screening of multiple SAs residues, as well as a simple method for the rapid and cost-effective screening of total SQ, SMPZ, SMD, SCP, and SPD in seafood.

A Direct Z-Scheme AgBr/CuBi2O4 Photocathode for Ultrasensitive Detection of Ciprofloxacin and Ofloxacin by Controlling the Release of Luminol in Self-Powered Microfluidic Photoelectrochemical Aptasensors

An innovative self-powered microfluidic photoelectrochemical (PEC) aptasensor was developed that uses photoactive AgBr/CuBi₂O₄ (ACO) composites as the photocathode matrix for ultrasensitive detection of ciprofloxacin (CIP) and ofloxacin (OFL). The formation of direct Z-scheme heterojunctions in ACO composites greatly aided electron/hole pair separation. Meanwhile, ZnIn₂S₄-decorated CdS nanorod arrays (CZIS) as the photoanode were used instead of a platinum counter electrode to provide electrons. The "signal-off" CIP detection was accomplished through the steric hindrance effect in the photoanode due to the combination of aptamer_(CIP) and CIP. To increase the cathodic photocurrent intensity for OFL determination, controlled release of luminol was first used. Luminol molecules were successfully embedded in the porous structure of silicon dioxide nanospheres (PSiO₂) by the electrostatic adsorption between PSiO₂ and aptamer_(OFL). The luminol released by specific recognition between OFL and aptamer_(OFL) could not only react with •O₂^- but also produce chemiluminescence emission, resulting in the "signal-on" state. Because of the signal "on-off-on", the proposed aptasensor exhibited wide linear ranges for CIP (0.001-100 ng/mL) and OFL (0.0005-100 ng/mL) detection. Furthermore, the low detection limits of CIP (0.06 pg/mL) and OFL (0.022 pg/mL) could achieve the ultrasensitive analysis.

Antibiotic Use in Livestock and Residues in Food-A Public Health Threat: A Review

The usage of antibiotics has been, and remains, a topic of utmost importance; on the one hand, for animal breeders, and on the other hand, for food safety. Although many countries have established strict rules for using antibiotics in animal husbandry for the food industry, their misuse and irregularities in compliance with withdrawal periods are still identified. In addition to animal-origin foods that may cause antibiotic residue problems, more and more non-animal-origin foods with this type of non-compliance are identified. In this context, we aim to summarize the available information regarding the presence of antibiotic residues in food products, obtained in various parts of the world, as well as the impact of consumption of food with antibiotic residues on consumer health. We also aim to present the methods of analysis that are currently used to determine antibiotic residues in food, as well as methods that are characterized by the speed of obtaining results or by the possibility of identifying very small amounts of residues.

A REVIEW ON DETERMINATION OF THE VETERINARY DRUG RESIDUES IN FOOD PRODUCTS

In this paper, we discuss veterinary medicine and its applications in the food field as well as its risk to the health of humans and animals by the residues. We review how the veterinary residues enter and cause some detrimental effects. We also mention two techniques to determine the residue of veterinary medication that existed in food originating from animals, including classic and advanced techniques. Finally, we discuss the potential of various developed methods compared to some traditional techniques.

A stick-like intelligent multicolor nano-sensor for the detection of tetracycline: The integration of nano-clay and carbon dots

In recent years, the overuse of antibiotics has caused more and more serious environmental pollution, the uncontrolled abuse of antibiotics makes bacteria produce resistance to antibiotics faster than the replacement rate of antibiotics themselves, leading to the emergence of super drug-resistant bacteria. Therefore, it is of great practical significance to establish a simple, rapid and sensitive method for the detection of antibiotics. By integrating natural nano-clay (Atta) and carbon dots (CDs), the real-time and rapid visual detection of tetracycline (TC) in the sample can be realized by chromaticity pick-up APP on smartphone. The nano-sensor can detect tetracycline in the concentration between 25 nM and 20 μM with the detection limit of 8.7 nM. The low detection limit coupled with good accuracy, sensitivity and specificity meets the requirements for the detection of tetracycline in food. More importantly, the test paper and fluorescent stick-like nano-sensor are designed to detect tetracycline by polychromatic fluorescence changes. In addition, a logic gate for semi-quantitative identification of the concentration of tetracycline is designed, which makes it possible for the application of the nano-sensor in the field of smart devices.

Detection of 4 quinolone antibiotics by chemiluminescence based on a novel Nor-Biotin bifunctional ligand and SA-ALP technology

A simple and effective direct competitive chemiluminescence immunoassay for the detection of 4 kinds of quinolone antibiotics in milk was established using Nor-Biotin (biotin-modified norfloxacin [NOR]) bifunctional ligand and alkaline phosphatase-conjugated streptavidin signal amplification technology. The polyclonal antibody was obtained after the immunization of New Zealand White rabbits using norfloxacin-derived antigen. "Click chemistry" was used for the rapid and facile synthesis of the Nor-Biotin bifunctional ligand. After the optimization of the incubation time and reaction buffer, the direct competitive chemiluminescence assay method was developed and used for sensitive detection of 4 kinds of quinolone drugs (NOR, pefloxacin, ciprofloxacin, and danofloxacin). The IC50 of the 4 kinds of quinolone drugs ranged from 7.35 to 24.27 ng/mL, and the lowest detection limits ranged from 0.05 to 0.16 ng/mL, which were below their maximum residue levels, approved by the EU for treatment of food-producing animals. To demonstrate the applicability of the assay, artificially contaminated milk samples with the 4 quinolone drugs were analyzed. The mean recovery rates of the drugs ranged from 86.31% to 112.11%.

Immunosorbent assay based on upconversion nanoparticles controllable assembly for simultaneous detection of three antibiotics

The abuse of antibiotics leads to an increase in resistant strains, which in turn leads to the development of superbugs that pose great difficulties for the treatment of human diseases. A high-throughput and highly sensitive avidin biotin complex immunosorbent assay based on upconversion nanoparticles controllable assembly (ABC-ULISA) for the detection of antibiotics was developed, which enabled accurate quantitative detection in a shorter period of time. Streptavidin and biotin-labeled upconversion nanoparticles form avidin-biotin-upconversion complex, which was then combined with biotinylated antibody to achieve double amplification of the signal, further improving detection sensitivity. Upconversion nanoparticles with 808 nm excitation provide better penetration without the need for an external source. The 96-well enzyme-linked plate was used as a detection platform to meet the high-throughput needs. ABC-ULISA was used to simultaneously detect three antibiotics with a limit of detection of 0.15 ng/mL for sulfamethazine, 0.03 ng/mL for sarafloxacin, and 0.05 ng/mL for tetracycline. The detection limit of ABC-ULISA was much lower than the traditional ELISA and ordinary ULISA. Moreover, ABC-ULISA was also versatile, and the corresponding target can be detected by changing different antibodies. The results were stable and reliable, and the equipment could be miniaturized, which was expected to be commercialized and on-site.

Veterinary Drug Residues in Animal-Derived Foods: Sample Preparation and Analytical Methods

Veterinary drugs are used to treat livestock and aquatic diseases and thus are introduced into animal-derived foods, endangering consumer health and safety. Antibiotic resistance is rapidly becoming a major worldwide problem, and there has been a steady increase in the number of pathogens that show multi-drug resistance. Illegal and excessive use of veterinary drugs in animals and aquaculture has serious adverse effects on humans and on all other environmental organisms. It is necessary to develop simple extraction methods and fast analytical methods to effectively detect veterinary drug residues in animal-derived foods. This review summarizes the application of various sample extraction techniques and detection and quantification methods for veterinary drug residues reported in the last decade (2010-2020). This review compares the advantages and disadvantages of various extraction techniques and detection methods and describes advanced methods, such as those that use electrochemical biosensors, piezoelectric biosensors, optical biosensors, and molecularly imprinted polymer biosensors. Finally, the future prospects and trends related to extraction methods, detection methods and advanced methods for the analysis of veterinary drug residues in animal-derived foods are summarized.

Preparation of monodisperse, restricted-access, media-molecularly imprinted polymers using bi-functional monomers for solid-phase extraction of sarafloxacin from complex samples

Monodisperse restricted-access media bi-functional monomers with molecularly imprinted polymers (RAM-MIPs) were constructed using surface-initiated atom transfer radical polymerization. They were used as solid-phase extraction (SPE) adsorbents to enrich sarafloxacin (SAR) residues from egg samples, and influences on their performance were investigated. Optimum synthesis of RAM-MIPs was achieved by combining a bi-functional monomer (4-vinylpyridine-co-methacrylic acid, 1:3) with an 8:1:32:8 ratio of a template molecule, cross-linker, and restricted-access functional monomer. The SAR imprinting factor of RAM-MIPs was 6.05 and the selectivity coefficient between SAR and other fluoroquinolones was 1.86-2.64. Compared with traditional MIPs, the RAM-MIPs showed better SAR enrichment and selectivity during extraction of a complex protein-containing solution. Empty SPE cartridges were filled with RAM-MIP microspheres as SPE adsorbents. The limit of quantitation for SAR was 4.23 ng g^-1 (signal-to-noise ratio = 10) and the mean SAR recovery from spiked egg samples was 94.0-101.3%. Intra-day and inter-day relative standard deviations were 1.1-9% and 1.5-3.3%, respectively.

Highly photoluminescent carbon dots-based immunosensors for ultrasensitive detection of aflatoxin M1 residues in milk

Here, a facile hydrothermal method was used to synthesize highly photoluminescent N-doped carbon dots, and the quantum yields reached 97.1%. Then, a label-free immunosensor based on the inner filter effect of carbon dots was developed for ultrasensitive detection of aflatoxin M₁ residues in milk. The detection limit was 0.0186 ng/mL (equivalents to 18.10 ng/kg), which satisfied the most stringent maximum tolerable limit value of 25 ng/kg. Besides, the immunosensor showed a good linear relationship from 0.003 ng/mL to 0.81 ng/mL, and the average recoveries ranged from 79.6% to 112.5% for spiked milk samples, with relative standard deviations ranging from 6.7% to 13.3%. Compared with other immunoassays, the inner filter effect-based immunosensor incorporating fluorescent detection into conventional enzymatic cascade amplification systems and could be a reliable on-site screening method for aflatoxin M₁ residue analysis.

A dual-mode resonance Rayleigh scattering and colorimetric alkaline phosphatase assay based on in situ ascorbic acid-induced signal generation from manganese dioxide nanosheets

Multimode sensing has attracted extensive attention because they provide more than one transduction channel, thus improving accuracy and sensitivity. Due to the structural diversity, MnO2 nanosheets and nanoneedles were successively obtained via one-step redox reaction and different self-assembly methods. MnO2 nanosheets possess outstanding optical properties including extremely strong resonance Rayleigh scattering (RRS) and absorbance signal, and were selected as a dual-mode sensing material. Inspired by the selectivity of alkaline phosphatase (ALP) towards dephosphorylate ascorbic acid 2-phosphate (AAP) to generate ascorbic acid (AA), which has the ability to decompose MnO2 nanosheets along with optical signals and colour change, a dual-mode optical ALP sensing platform has been designed. Therefore, MnO2 nanosheets can serve as colorimetric probes by directly visualizing the colour variation with bare eyes. Moreover, the detection limit obtained by the RRS sensing mode can be as low as 0.17 mU L-1, which is far superior to that obtained by previously reported methods. The strategy not only has good feasibility and sensitivity, but also shows good prospects for a series of ALP-extended sensing applications.

Quantitative ciprofloxacin on-site rapid detections using quantum dot microsphere based immunochromatographic test strips

The ciprofloxacin (CIP) abuse has caused many problems threatening to human health. Here, we design the quantum dot microsphere (QDM) based immunochromatographic quantitative CIP test strip: when the sample under detection contains CIP, the QDM-monoclonal antibody (mAb) probes bound with the CIP and cannot be captured by CIP-bovine serum albumin (BSA) conjugation dispersed on the T lines, reducing the fluorescence intensities. These test strips can provide a low detection limit of 0.05 ng/mL and a wide linear detection range from 0.1 ng/mL to 100 ng/mL in high sensitivity and accuracy as well as good selectivity, reproducibility and stability. Moreover, a smartphone based test strip reader with the size of 85 mm × 48 mm × 44 mm is also fabricated using 3-D printing to automatically and quantitatively detect CIP. The whole process of CIP detection can be finished within 15 min, but only cost ~1 RMB (10 cents).

Study of the antibiotic residues in poultry meat in some of the EU countries and selection of the best compositions of lactic acid bacteria and essential oils against Salmonella enterica

In this study, the presence of antibiotics (ANB) residues was evaluated in poultry meat purchased from German and Lithuanian markets. In addition, the antimicrobial activity of 13 lactic acid bacteria (LAB) strains, 2 essential oils (EO) (Thymus vulgaris and Origanum vulgare L.), and their compositions were tested for the purpose of inhibiting antibiotic-resistant Salmonella spp. ANB residues were found in 3 out of the 20 analyzed poultry meat samples: sample no. 8 contained enrofloxacin (0.46 μg/kg), sample no. 14 contained both enrofloxacin and doxycycline (0.05 and 16.8 μg/kg, respectively), and sample no. 18 contained enrofloxacin (2.06 μg/kg). The maximum residue limits (MRLs) for the sum of enrofloxacin and ciprofloxacin and for doxycycline in the poultry muscle are 100 μg/kg. Finally, none of the tested poultry meat samples exceeded the suggested MRLs; however, the issue of ANB residues still requires monitoring of the poultry industry in Germany, Poland, and Lithuania, despite the currently established low ANB concentrations. These findings can be explained by the increased use of alternatives to ANB in the poultry industry. Our results showed that an effective alternative to ANB, which can help to reduce the occurrence of antibiotic-resistant salmonella, is a composition containing 1.0% of thyme EO and the following LAB strains: Lactobacillus plantrum LUHS122, Enteroccocus pseudoavium LUHS242, Lactobacillus casei LUHS210, Lactobacillus paracasei LUHS244, Lactobacillus plantarum LUHS135, Lactobacillus coryniformins LUHS71, and Lactobacillus uvarum LUHS245, which can be recommended for poultry industry as components of feed or for the treatment of surfaces, to control the contamination with Salmonella strains. However, it should be mentioned that most of the tested LAB strains were inhibited by thyme EO at the concentrations of 0.5 and 1.0%, except for LUHS122, LUHS210, and LUHS245. Finally, it can be noted that the agents responsible for the inhibitory effect on Salmonella are not the viable LAB strains but rather their metabolites, and further studies are needed to identify which metabolites are the most important.

Highly sensitive detection of multiple antibiotics based on DNA tetrahedron nanostructure-functionalized magnetic beads

Functional DNAs-functionalized magnetic beads (MBs) offer great potential in bioanalysis field because of their target recognition and magnetic separation functions. However, the recognition capability and hybridization affinity of DNA probes often suffer from limited available space, poor probe conformation and non-selective adsorption. To overcome these limitations, we herein used aptamer-pendant DNA tetrahedron nanostructure-functionalized MBs (TETapt-tet MBs) to develop a target-response fluorescence method with tetracycline (TET) as a model. In the absence of TET, 6-carboxy-X-rhodamine-labeled complementary DNAs (ROX-cDNAs) were assembled on the surface of MBs. Upon the addition of target TET, the ROX-cDNAs were separated and released from the MBs to generate fluorescence signal. The limit of detection and limit of quantification for TET were found to be 6 pg mL^-1 and 20 pg mL^-1, respectively. Compared with ssDNA-functionalized MBs surface, the designed DNA tetrahedron nanostructure-based surface could decrease the hybridization time and reduce false positives, ensuring the accuracy of TET detection in complex samples. The presented method was successfully employed for TET detection in honey samples. Moreover, this functionalization strategy could be extended to detect multiple antibiotics by simply substituting different aptamer sequences. Therefore, the proposed method has great potential in the field of food safety and public health.

Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

Accurate onsite profiling of fluoroquinolone antibiotics (FQs) is of vital significance for ensuring food safety and estimating environmental pollution. Here, we propose a smartphone-based QD ratiometric fluorescence-sensing system to precisely report the level of FQs. As a proof of concept, we chose gatifloxacin (GFLX, a typical member of FQs) as the model for the analytical target, which could effectively trigger the fluorescence color variation of QDs from bright yellow-green (∼557 nm) to blue (∼448 nm) through the photoinduced electron-transfer (PET) process, thus yielding an evident ratiometric response. Based on this, the level of GFLX can be reported within a wide linear range from 0.85 nM to 3.6 μM. Moreover, this assay owns a high sensitivity with a low detection limit of 0.26 nM for GFLX and a quick sample-to-answer monitoring time of 5.0 min, manifesting that this platform could be fully qualified for onsite requirements. Interestingly, this portable device has successfully been applied for the onsite detection of GFLX in real food (i.e., milk and drinking water) and environmental (i.e., fish-farming water) samples with acceptable results. This developed platform offers a great promise for the point-of-care detection of FQ residues in practical application with the merits of being label-free, low-cost, and rapid, thus opening a new pathway for the onsite evaluation of food safety and environmental health.

Highly efficient fluorescence sensing of kanamycin using Endo IV-powered DNA walker and hybridization chain reaction amplification

An ultrasensitive fluorescence sensing strategy for kanamycin (KANA) determination using endonuclease IV (Endo IV)-powered DNA walker, and hybridization chain reaction (HCR) amplification was reported. The sensing system consists of Endo IV-powered 3D DNA walker using for the specific recognition of KANA and the formation of the initiators, two metastable hairpin probes as the substrates of HCR and a tetrahydrofuran abasic site (AP site)-embeded fluorescence-quenched probe for fluorescence signal output. On account of this skilled design of sensing system, the specific binding between KANA and its aptamer activates DNA walker, in which the swing arm can move autonomously along the 3D track via Endo IV-mediated hydrolysis of the anchorages, inducing the formation of initiators that initiates HCR and the following Endo IV-assisted cyclic cleavage of fluorescence reporter probes. The use of Endo IV offers the advantages of simplified and accessible design without the need of specific sequence in DNA substrates. Under the optimal experimental conditions, the fluorescence biosensor shows excellent sensitivity toward KANA detection with a detection limit as low as 1.01 pM (the excitation wavelength is 486 nm). The practical applicability of this strategy is demonstrated by detecting KANA in spiked milk samples with recovery in the range of 98 to 102%. Therefore, this reported strategy might create an accurate and robust fluorescence sensing platform for trace amounts of antibiotic residues determination and related safety analysis. Graphical abstract Highly efficient fluorescence sensing of kanamycin using Endo IV-powered DNA Walker and hybridization chain, reaction amplification, Xiaonan Qu, Jingfeng Wang, Rufeng Zhang, Yihan Zhao, Shasha Li, Yu Wang, Su Liu*, Jiadong Huang, and Jinghua Yu, an ultrasensitive fluorescence sensing strategy for kanamycin determination using endonuclease IV-powered DNA walker, and hybridization chain reaction amplification is reported.

Environmental Conversion Path Inference of New Designed Fluoroquinolones and Their Potential Environmental Risk

Fluoroquinolone (FQ) derivatives with environmental friendliness regarding photodegradation, bioconcentration, and genotoxicity were selected from our previous works so that their transformation pathways of biological metabolism, photodegradation, microbial degradation, and chlorination disinfection could be studied. The pathways of these molecules and their derivatives were simulated to investigate the genotoxicity of their transformation products. The results showed that the genotoxicity of the biological metabolites, photodegradation products, and microbial degradation products of the maternal FQ derivatives partially increased, whereas the disinfection by-products exhibited lower genotoxicity than their precursors. Some designed FQ molecular derivatives still had potential environmental risks in biological metabolism, photodegradation, and microbial degradation. This study demonstrated that it is necessary to take into account the potential environmental risks of the transformed products of the modified FQs molecules during biometabolism, photodegradation, microbial degradation, and chlorination processes when designing novel FQ molecules. In future studies, assessing the potential environmental risks during various artificial or natural processes can be applied to screen environmentally friendly novel FQ molecules to avoid and or reduce their threat to environmental and human health.

A label-free electrochemical platform for the detection of antibiotics based on cascade enzymatic amplification coupled with a split G-quadruplex DNAzyme

Herein, a split G-quadruplex DNAzyme as a signal reporter was integrated into an electrochemical sensing platform for the detection of antibiotics with specificity and sensitivity. To improve the signal-to-noise ratio, two G-rich oligonucleotide sequences (G1 and G2) were blocked into two different hairpin probes, preventing the two segments from assembling into a spilt G-quadruplex structure. Moreover, we designed a double-arch probe, consisting of an aptamer as the recognition element and two-step enzymatic signal amplification. Concretely, the first is the Nt.BbvCI-assisted nicking cyclic reaction activated by target-aptamer binding, and the second is exonuclease III-aided cyclic amplification for generating abundant G1 and G2. The modified capture probe on the electrode was used to combine G1 and G2 to form the spilt G-quadruplex/hemin when K+ and hemin were present. This complex plays the role of DNAzyme with superior horseradish peroxidase activity in catalyzing the decomposition of H2O2. Under optimal conditions, this biosensor showed an excellent performance for sensing kanamycin with a detection limit of 83 fM for kanamycin concentrations ranging from 100 fM to 1 nM. Hence, the proposed strategy has potential as an efficient and actual platform for small molecule analysis.

Comparison of soybean peroxidase with horseradish peroxidase and alkaline phosphatase used in immunoassays

Enzyme labeling of an antigen or an antibody helps to visualize and amplify the signal and is an important reagent used in immunoassays for the detection of a target of interest. In this research, soybean peroxidase (SBP), a less commonly used enzyme reporter, was compared in immunoassays with the two most commonly used reagents, horseradish peroxidase (HRP) and alkaline phosphatase (ALP). The enzyme-antibody conjugates were evaluated by their performance in an indirect competitive enzyme-linked immunosorbent assay (icELISA) and in an indirect competitive chemiluminescent enzyme immunoassay (icCLEIA) for ractopamine (RAC). The results revealed that the more affordable SBP offers a long-lasting chemiluminescent signal, which outperformed ALP and HRP. SBP-antibody conjugate (SBP-Ab) based immunoassays produced lower limits of detection (LODs) and better accuracy in the detection of RAC in animal urine samples. Additionally, SBP-Ab has advantages in being more resistant to heat, acid and organic solvents. These results suggest that SBP could be a potentially excellent alternative to HRP and ALP for the development of immunoassay in food safety field.

Broad-Range Magnetic Relaxation Switching Bioassays Using Click Chemistry-Mediated Assembly of Polystyrene Beads and Magnetic Nanoparticles

Magnetic relaxation switching assays with a broad and tunable detection range can greatly improve current magnetic sensors for biochemical detections, but it remains challenging in terms of the limited detection range and low sensitivity. Herein, we report a methodology that uses click chemistry to assemble different sizes of polystyrene beads and magnetic nanoparticles to prepare versatile magnetic probes for broad-range bioassays with high sensitivity. Small magnetic nanoparticles can be controllably assembled on different sizes of polystyrene beads to form core-satellite structures, acting as broad-range probes that enable the magnetic relaxation switching assays with high sensitivity because different sizes of polystyrene beads can conjugate different numbers of small magnetic nanoparticles. On the basis of click chemistry, we assemble polystyrene beads and magnetic nanoparticles to develop a biosensing technique for analyzing three different antibiotics, with a high sensitivity and a tunable detection range from pg/mL to μg/mL.

Discovery of precise pH-controlled biomimetic catalysts: defective zirconium metal-organic frameworks as alkaline phosphatase mimics

The well-controlled structural motifs of zirconium metal-organic frameworks (Zr-MOFs) and their similarity to enzyme cofactors make them ideally suited for biomimetic catalysis. However, the activation methodologies for these motifs, the structural information about active conformations and the reaction mechanism during these biomimetic reactions, are largely unknown. Herein, we have explored the precise pH-controlled activation processes, active sites, and reaction mechanisms for a series of Zr-MOFs as alkaline phosphatase mimics. Activation of the Zr-MOFs with a broad range and precise changes of pH led to the discovery of the MOF-catalyzed volcano plot with activity versus pH changes. This unique response revealed the existence of the precisely pH-controlled active form of the material, which was confirmed with computational analysis using density functional theory and diffuse reflectance infrared Fourier transform spectroscopy. These results will open a window for state-of-the-art design of efficient MOF enzyme mimics in aqueous solution.

Methods for field measurement of antibiotic concentrations: limitations and outlook

The growing prevalence of antibiotic resistance poses an increasingly serious threat to human health. Although an important driver of antibiotic resistance is the continuous exposure of bacteria to sublethal concentrations of antibiotics in natural environments, antibiotic pollutants are not currently tracked globally or systematically. This limits the international capacity to address the rise of antibiotic resistance at its source. To address this lack of data, the development of methods to measure antibiotic concentrations on-site is essential. These methods, ideally, must be sensitive to sublethal concentrations of antibiotics and require minimal technical expertise. Furthermore, factors such as cost, selectivity, biosafety and the ability to multiplex must be evaluated in the context of field use. Based on these criteria, we provide a critical review of current methods in antibiotic detection and evaluate their adaptability for use on-site. We categorize these methods into microbiological assays, physical and chemical assays, immunoassays, aptasensors and whole-cell biosensors. We recommend continued development of a dipstick or microfluidics approach with a bacterial promoter-based mechanism and colorimetric output. This technique would incorporate the advantageous aspects of existing methods, maximize shelf-life and ease-of-use, and require minimal resources to implement in the field.