Stable and uniform SERS signals from self-assembled two-dimensional interfacial arrays of optically coupled Ag nanoparticles

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Potential-Modulated Surface-Enhanced Raman Spectroscopy of Tolmetin at Gold Nanoparticle Film Functionalized Polarizable Liquid-Liquid Interfaces

An aqueous colloidal suspension of gold nanoparticles (AuNPs) may be condensed into a thin fractal film at the polarizable liquid-liquid interface formed between two immiscible electrolyte solutions upon injection of millimolar concentrations of sodium chloride to the aqueous phase. By adjusting the interfacial polarization conditions (negative, intermediate, and positive open-circuit potentials), the morphology of the film is modified, resulting in unique surface plasmon properties of the film, which enable in situ surface-enhanced Raman spectroscopy (SERS). Intense SERS signals are observed at the polarizable liquid-liquid interface when micromolar concentrations of tolmetin, a nonsteroidal anti-inflammatory drug, are entrapped in the AuNP fractal film. The change in the signal intensity, averaged over multiple spectra, with respect to the concentration of tolmetin, depends on the polarization conditions and suggests the presence of chemical-induced damping effects on the surface plasmons of the gold film.

Tunable Approach to Induce the Formation of Flexible Nanofilms from Small (3 nm) Gold Nanoparticles at Oil-Water Interfaces

The self-assembly of gold nanoparticles (AuNPs) into thin films at the liquid-liquid interface has promising applications in industries such as catalysis, optics, and sensors. However, precise control over their formation is complex, influenced by several factors which scale differently with core size. Due to their small free energy of adsorption, there are few examples of AuNPs with core diameters <10 nm. The present research evaluates the adsorption of ∼3 nm AuNPs from either side of the oil-aqueous interface with variations in ligand shell composition, the oil phase composition, and the structure of alcohol additives to best drive thin-film formation. Film formation and quality are evaluated, and a recent thermodynamic model is used to gain insight into the primary forces promoting this adsorption. Results demonstrate that longer-chain alcohol additives (namely, n-butanol and n-hexanol) induced adsorption more efficiently than shorter-chain alcohols (ethanol). The volume of alcohol additive needed to induce adsorption was dependent upon the ligand composition, suggesting that the mechanism for induced interfacial adsorption is via interaction with the AuNP ligand shell. Comparison with the thermodynamic model indicates that the driving force for this induced adsorption is the alteration of the three-phase contact angle. Additionally, the use of various oils demonstrates that as oil-water interfacial tension increases, more AuNPs adsorb to the interface. This relationship is also supported by the model. Insight gained for favorable conditions of adsorption for AuNPs < 10 nm as well as the underlying thermodynamic mechanism is important in working toward the ability to fine-tune such films for industrial applications.

Construction of Graphene@Ag-MLF composite structure SERS platform and its differentiating performance for different foodborne bacterial spores

A new surface-enhanced Raman spectroscopy (SERS) biosensor of Graphene@Ag-MLF composite structure has been fabricated by loading AgNPs on graphene films. The response of the biosensor is  based on plasmonic sensing. The results showed that the enhancement factor of three different spores reached 107 based on the Graphene@Ag-MLF substrate. In addition, the SERS performance was stable, with good reproducibility (RSD<3%). Multivariate statistical analysis and chemometrics were used to distinguish different spores. The accumulated variance contribution rate was up to 96.35% for the top three PCs, while HCA results revealed that the spectra were differentiated completely. Based on optimal principal components, chemometrics of KNN and LS-SVM were applied to construct a model for rapid qualitative identification of different spores, of which the prediction set and training set of LS-SVM achieved 100%. Finally, based on the Graphene@Ag-MLF substrate, the LOD of three different spores was lower than 102 CFU/mL. Hence, this novel Graphene@Ag-MLF SERS substrate sensor was rapid, sensitive, and stable in detecting spores, providing strong technical support for the application of SERS technology in food safety.

Combining surface-accessible Ag and Au colloidal nanomaterials with SERS for in situ analysis of molecule-metal interactions in complex solution environments

The interactions between molecules and noble metal nanosurfaces play a central role in many areas of nanotechnology. The surface chemistry of noble metal surfaces under ideal, clean conditions has been extensively studied; however, clean conditions are seldom met in real-world applications. We developed a sensitive and robust characterization technique for probing the surface chemistry of nanomaterials in the complex environments that are directly relevant to their applications. Surface-enhanced Raman spectroscopy (SERS) can be used to probe the interaction of plasmonic nanoparticles with light to enhance the Raman signals of molecules near the surface of nanoparticles. Here, we explain how to couple SERS with surface-accessible plasmonic-enhancing substrates, which are capped with weakly adsorbing capping ligands such as citrate and chloride ions, to allow molecule-metal interactions to be probed in situ and in real time, thus providing information on the surface orientation and the formation and breaking of chemical bonds. The procedure covers the synthesis and characterization of surface-accessible colloids, the preliminary SERS screening with agglomerated colloids, the synthesis and characterization of interfacial nanoparticle assemblies, termed metal liquid-like films, and the in situ biphasic SERS analysis with metal liquid-like films. The applications of the approach are illustrated using two examples: the probing of π-metal interactions and that of target/ligand-particle interactions on hollow bimetallic nanostars. This protocol, from the initial synthesis of the surface-accessible plasmonic nanoparticles to the final in situ biphasic SERS analysis, requires ~14 h and is ideally suited to users with basic knowledge in performing Raman spectroscopy and wet synthesis of metal nanoparticles.

Reversible assembly of nanoparticles: theory, strategies and computational simulations

The significant advances in synthesis and functionalization have enabled the preparation of high-quality nanoparticles that have found a plethora of successful applications. The unique physicochemical properties of nanoparticles can be manipulated through the control of size, shape, composition, and surface chemistry, but their technological application possibilities can be further expanded by exploiting the properties that emerge from their assembly. The ability to control the assembly of nanoparticles not only is required for many real technological applications, but allows the combination of the intrinsic properties of nanoparticles and opens the way to the exploitation of their complex interplay, giving access to collective properties. Significant advances and knowledge gained over the past few decades on nanoparticle assembly have made it possible to implement a growing number of strategies for reversible assembly of nanoparticles. In addition to being of interest for basic studies, such advances further broaden the range of applications and the possibility of developing innovative devices using nanoparticles. This review focuses on the reversible assembly of nanoparticles and includes the theoretical aspects related to the concept of reversibility, an up-to-date assessment of the experimental approaches applied to this field and the advanced computational schemes that offer key insights into the assembly mechanisms. We aim to provide readers with a comprehensive guide to address the challenges in assembling reversible nanoparticles and promote their applications.

Formation of Gold Nanoparticle Self-Assembling Films in Various Polymer Matrices for SERS Substrates

Surface-enhanced Raman spectroscopy (SERS) is regarded as a versatile tool for studying the composition and structure of matter. This work has studied the preparation of a SERS substrate based on a self-assembling plasmonic nanoparticle film (SPF) in a polymer matrix. Several synthesis parameters for the SPF are investigated, including the size of the particles making up the film and the concentration and type of the self-assembling agent. The result of testing systems with different characteristics is discussed using a model substance (pseudoisocyanin iodide). These models can be useful in the study of biology and chemistry. Research results contain the optimal parameters for SPF synthesis, maximizing the SERS signal. The optimal procedure for SPF assembly is determined and used for the synthesis of composite SPFs within different polymer matrices. SPF in a polymer matrix is necessary for the routine use of the SERS substrate for various types of analytes, including solid samples or those sensitive to contamination. Polystyrene, polyvinyl alcohol (PVA), and polyethylene are investigated to obtain a polymer matrix for SPF, and various methods of incorporating SPF into a polymer matrix are being explored. It is found that films with the best signal enhancement and reproducibility were obtained in polystyrene. The minimum detectable concentration for the SERS substrate obtained is equal to 10⁻¹⁰ M. We prepared a SERS substrate with an analytical enhancement factor of 2.7 × 10⁴, allowing an increase in the detection sensitivity of analyte solutions of five orders of magnitude.

Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

High-throughput surface-enhanced Raman scattering (SERS) reader, especially for liquid sample testing, is of great significance and huge demand in biology, environment, and other analytical fields. Inspired by the principle of microplate reader, herein, we developed a microplate-SERS reader for semiautomatic and high-throughput assays by virtue of three-dimensional liquid interfacial arrays (LIAs). For the first time, the formation of LIA in oil-in-water state, water-in-oil state, and two-dimensional plane state is realized by operating the hydrophilicity (contact angle) of the container. Through the force analysis of LIA, the effect of organic (O) phase density on the relative position of LIA was quantified. In addition, the optimized reader offers fast and continuous semiautomatic detection of 12 samples below 10 min with great signal reproducibility (calibration with the characteristic peak of O phase as the internal standard). The isolated wells in the microplate prevent analyte cross talk, allowing accurate quantification of each sample. Multiplex analysis capability highlights that this reader has the ability of rapid identification and quantification of samples containing various analytes and concentrations. The results demonstrate high-resolution dual and triple analyte detection with fully preserved signal and Raman features of individual analytes in a mixture, which implies that it also has excellent anticounterfeiting applications. This microplate-SERS reader combines the superior advantages of the LIA, microplate, and SERS techniques to retrieve the molecular vibrational fingerprints of various chemicals in complex media.

Stable SERS substrate based on highly reflective metal liquid-like films wrapped hydrogels for direct determination of small molecules in a high protein matrix

The study of the interaction between small molecules and proteins is important. Surface-enhanced Raman spectroscopy (SERS) is suitable for such applications since it has the power of detecting a molecule based on its intrinsic nature and without labeling. Herein, the MeLLFs@PAAG SERS substrate supporting highly reflective metal liquid-like films (MeLLFs) with polyacrylamide hydrogels (PAAG) has high-density "hot spots" to provide excellent SERS activity. The MeLLFs@PAAG formed by AgNPs only has less than 15% SERS activity loss when stored in the air for more than three weeks. By using rhodamine 6G (R6G) as a model analyte, the AgNPs based MeLLFs@PAAG SERS substrate exhibits an enhancement factor (EF) as high as 8.0 × 10⁶, a limit of detection (LOD) of 76.8 pM (S/N = 3). Also, the formed PAAG provided a 3D molecular network to orderly secure the assembled nanoparticles (NPs), which not only improves the stability of NPs but also shields the Raman signal of proteins as high as 45 g/L allowing the direct determination of the binding rate of human serum albumin (HSA) and doxorubicin (DOX). A binding rate of about 70% was detected, which is consistent with previous reports. Thus, proposed the MeLLFs@PAAG SERS substrate can be used as a promising candidate for SERS measurement in complex biological samples.

High-performance surface-enhanced Raman spectroscopy chip integrated with a micro-optical system for the rapid detection of creatinine in serum

To improve the sensitivity of disease biomarker detection, we proposed a high-performance surface-enhanced Raman spectroscopy (SERS) chip integrated with a micro-optical system (MOS). The MOS, which is based on the micro-reflecting cavity and the micro-lens, optimizes the optical matching characteristics of the SERS substrate and the Raman detection system, and greatly improves the SERS detection sensitivity by improving the collection efficiency of the Raman scattering signal. A uniform single layer of silver nanoparticles on a gold film was prepared as the SERS substrate using a liquid-liquid interface self-assembly method. The micro-reflecting cavity and micro-lens were prepared using micro-processing technology. The SERS chip was constructed based on the MOS and the Au film-based SERS substrate, and experimental results showed an EF of 1.46×10⁸, which is about 22.4 times higher than that of the Si-based SERS substrate. The chip was used for the detection of creatinine and the detection limit of creatinine in aqueous solution was 1 µM while the detection limit in serum was 5 µM. In addition, SERS testing was conducted on serum samples from normal people and patients with chronic renal impairment. Principal component analysis and linear discriminant analysis were used for modeling and identification, and the results showed a 90% accuracy of blind sample detection. These results demonstrate the value of this SERS chip for both research and practical applications in the fields of disease diagnosis and screening.

Self-assembled nano-Ag/Au@Au film composite SERS substrates show high uniformity and high enhancement factor for creatinine detection

Serum creatinine is a key biomarker for the diagnosis and monitoring of kidney disease. Rapid and sensitive creatinine detection is thus important. Here, we propose a high-performance nano-Ag/Au@Au film composite SERS substrate for the rapid detection of creatinine in human serum. Au nanoparticles (AuNPs) and Ag nanoparticles (AgNPs) with uniform particle size were synthesized by a chemical reduction method, and the nano-Ag/Au@Au film composite SERS substrate was successfully prepared via a consecutive layer-on-layer deposition using an optimized liquid-liquid interface self-assembly method. The finite element simulation analysis showed that due to the multi-dimensional plasmonic coupling effect formed between the AuNPs, AgNPs, and the Au film, the intensity of the local electromagnetic field was greatly improved, and a very high enhancement factor (EF) was obtained. Experimental results showed that the limit of detection (LOD) of this composite SERS substrate for rhodamine 6G (R6G) molecules was as low as 1 × 10^-13M, and the Raman EF was 15.7 and 2.9 times that of the AuNP and AgNP monolayer substrates respectively. The results of different batch tests and SERS mapping showed that the relative standard deviations of the Raman intensity of R6G at 612 cm^-1were 12.5% and 11.7%, respectively. Finally, we used the SERS substrate for the label-free detection of human serum creatinine. The results showed that the LOD of this SERS substrate for serum creatinine was 5 × 10^-6M with a linear correlation coefficient of 0.96. In conclusion, the SERS substrate has high sensitivity, good uniformity, simple preparation, and has important developmental potential for the rapid detection and application of disease biomarkers.

Quantitative SERS sensor based on self-assembled Au@Ag heterogeneous nanocuboids monolayer with high enhancement factor for practical quantitative detection

Accurate and rapid quantitative detection of pesticide and pollutant levels in the actual sample can aid in protecting food security, environmental security, and human health. A high Raman enhancement factor and good repeatability of the surface-enhanced Raman spectroscopy (SERS) substrates are favorable to quantitative analysis. Herein, a quantitative SERS sensor based on constructed self-assembled plasmonic Au@Ag heterogeneous nanocuboids (Au@Ag NCs) monolayer was developed. The sensor was used to quantitatively detect the trace pesticides extracted from pear surfaces and pollutants in fishpond water. Densely packed Au@Ag NCs fabricated into large-scale monolayer films were chemically functionalized using 4-methyl-thiobenzoic acid (4-MBA) at the organic/aqueous interface, in which plentiful nanogaps contribute to increase hotspots. Their sharp corners and edges make the sensor have high SERS performance through providing abundant "hot spots." The obtained optically SERS-based sensor with uniform liquid-state interfacial nanoparticle arrays appeared to have nice SERS performance and uniformity using crystal violet (CV) as a probe molecule. In particular, the proposed SERS sensor was applied for quantitative detection of thiabendazole (TBZ) extracted from pear surfaces and malachite green (MG) in fishpond water down to levels of 0.0105 nM and 0.87 nM for SERS assay respectively. As a result, our proposed SERS quantitative detection strategy is quite preferred to on-site analysis and supervision of contaminant in food samples.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Marangoni Effect-Driven Transfer and Compression at Three-Phase Interfaces for Highly Reproducible Nanoparticle Monolayers

Interfacial self-assembly is a powerful technology for preparing large scale nanoparticle monolayers, but fabrication of highly repeatable large scale nanoparticle monolayers remains a challenge. Here we develop an oil/water/oil (O/W/O) three-phase system based on the Marangoni effect to fabricate highly reproducible nanoparticle monolayers. Nanoparticles could be easily transferred and compressed from the lower O/W interface to the upper O/W interface due to the interfacial tension gradient. The O/W/O system can be constructed using different kinds of organic solvents. Through this approach, good uniformity and reproducibility of the nanoparticle monolayers could be guaranteed even using a wide range of nanoparticle concentrations. Furthermore, this strategy is generally applicable to various nanoparticles with different sizes, shapes, components, and surface ligands, which offers a facile and general approach to functional nanodevices.

Pickering Emulsions of Hydrophilic Silica Particles and Symmetrical Organic Electrolytes

At high pH, bare silica particles are not an effective Pickering emulsion stabilizer of nonpolar oils with water due to their high surface charge. One way to promote particle adsorption to the oil-water interface is to add salt to the aqueous phase, although particle flocculation normally ensues. In most cases, inorganic salts are added, while little attention has been paid to the use of organic salts. Here, we describe the effects of adding tetraalkylammonium salts (R₄NX, X is an anion) to aqueous dispersions of silica nanoparticles at high pH and investigating the possibility of subsequently stabilizing octane-in-water (o/w) emulsions. The chain length of the R group is systematically increased from 1 (methyl) to 4 (butyl). Unlike inorganic electrolytes, the addition of these salts does not lead to particle flocculation in water, although the particle charge is reduced. No stable emulsion forms for the methyl analogue, but very stable o/w emulsions can be prepared with the other three members, with the minimum concentration of salt being required decreasing with R chain length to as low as 5 × 10^-5 M. The three-phase oil-water-solid contact angle increases with salt concentration and R chain length, confirming the increase in particle hydrophobicity on addition of salt. We show that the butyl analogue behaves similarly to that of cetyltrimethylammonium bromide surfactant with respect to promoting silica particles to emulsion drop interfaces. Finally, we compare the arrangement of micrometer-sized silica particles at both curved droplet interfaces and at a planar oil-water interface at different concentrations of the most hydrophobic salt.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Fabrication of liquid–liquid self-assembled Ag arrays on disposable screen-printed electrodes and their application in the identification and analysis of the adsorption behavior of organic carboxylates through in situ electrochemical surface-enhanced Raman scattering

A disposable Ag array@screen-printed electrode (SPE) was fabricated for the identification and analysis of the adsorption behavior of organic carboxylates in in situ electrochemical surface-enhanced Raman scattering (EC-SERS).

A review on recent advances in the applications of surface-enhanced Raman scattering in analytical chemistry

This review is focused on recent developments of surface-enhanced Raman scattering (SERS) applications in Analytical Chemistry. The work covers advances in the fabrication methods of SERS substrates, including nanoparticles immobilization techniques and advanced nanopatterning with metallic features. Recent insights in quantitative and sampling methods for SERS implementation and the development of new SERS-based approaches for both qualitative and quantitative analysis are discussed. The advent of methods for pre-concentration and new approaches for single-molecule SERS quantification, such as the digital SERS procedure, has provided additional improvements in the analytical figures-of-merit for analysis and assays based on SERS. The use of metal nanostructures as SERS detection elements integrated in devices, such as microfluidic systems and optical fibers, provided new tools for SERS applications that expand beyond the laboratory environment, bringing new opportunities for real-time field tests and process monitoring based on SERS. Finally, selected examples of SERS applications in analytical and bioanalytical chemistry are discussed. The breadth of this work reflects the vast diversity of subjects and approaches that are inherent to the SERS field. The state of the field indicates the potential for a variety of new SERS-based methods and technologies that can be routinely applied in analytical laboratories.

Determination of prostate cancer marker Zn2+ with a highly selective surface-enhanced Raman scattering probe on liquid-liquid self-assembled Au nanoarrays

As the concentration of Zn²⁺ in patients with prostate cancer is much less than that in healthy persons, Zn²⁺ concentration can be used as a marker to expediently screen prostate cancer. In this study, a sensitive and highly selective surface-enhanced Raman scattering (SERS) method to detect Zn²⁺ concentration in human prostatic fluids by utilizing water-insoluble 2-carboxyl-2'-hydroxyl-5'-sulfoformazylbenze (Zincon) as a SERS probe based on self-assembled Au nanoarrays at a liquid-liquid interface between n-hexane and Au colloids was proposed. Zincon showed remarkably different SERS bands before and after coordinating Zn²⁺ in the controlled conditions (70 μL of ethanol, 500 μL of n-hexane, pH value of 7.1 and 10 s of vortex mixing time), which can be used in quantifying Zn²⁺ with characteristic peaks. The proposed SERS method presented a good linear relationship ranging from 0.5 to 10 μmol/L and a satisfactory detection limit of 0.1 μmol/L as well as low interference with other metal ions. Moreover, the detection results are close to those of the conventional standard atomic absorption spectroscopy (AAS) method.

Direct Discrimination of Edible Oil Type, Oxidation, and Adulteration by Liquid Interfacial Surface-Enhanced Raman Spectroscopy

The quality and safety of edible oils is a momentous but formidable challenge, especially regarding identification of oil type, oxidation, and adulteration. Most conventional analytical methods have bottlenecks in sensitivity, specificity, accessibility, or reliability. Surface-enhanced Raman spectroscopy (SERS) is promising as an unlabeled and ultrasensitive technique but limited by modification of inducers or surfactants on metal surfaces for oil analysis. Here, we develop a quantitative SERS analyzer on two-liquid interfacial plasmonic arrays for direct quality classification of edible oils by a portable Raman device. The interfacial plasmonic array is self-assembled through mixing the gold nanoparticle (GNP) sols and oil sample dissolved in chloroform without any surfactants or pretreatments. Different kinds of edible oils dissolved in chloroform directly participate in self-assembly of plasmonic arrays that finally localizes onto a three-dimensional (3D) oil/water interface. The 3D plasmonic array is self-healing, shape adaptive, and can be transferred to any glass containers as a substrate-free SERS analyzer for direct Raman measurements. It produces sensitive responses of SERS on different kinds of edible oils. By virtue of principal component analysis (PCA), this analyzer is able to quickly distinguish six edible oils, oxidized oils, and adulterated oils. Moreover, the solvent chloroform generates unique and stable SERS bands that can utilized as an inherent internal standard (IIS) to calibrate SERS fluctuation and greatly improve quantitation accuracy. Compared to conventional lab methods, this analyzer avoids complex and time-consuming preprocessing and provides significant advantages in cost, speed, and utility. Our study illuminates a facile way to determine edible oil quality and promises great potential in food quality and safety analysis.

Liquid-state quantitative SERS analyzer on self-ordered metal liquid-like plasmonic arrays

Liquid interfacial plasmonic platform is emerging for new sensors, catalysis, and tunable optical devices, but also promises an alternative for practical applications of surface-enhanced Raman spectroscopy (SERS). Here we show that vigorous mixing of chloroform with citrate-capped gold nanorod sols triggers the rapid self-assembly of three-dimensional plasmonic arrays at the chloroform/water (O/W) interface and produces a self-healing metal liquid-like brilliant golden droplet. The O phase itself generates stable SERS fingerprints and is a good homogeneous internal standard for quantitative analysis. This platform presents reversible O/W encasing in a common cuvette determined just by surface wettability of the container. Both O-in-W and W-in-O platforms exhibit excellent SERS sensitivity and reproducibility for different analytes by the use of a portable Raman device. It paves the way toward a practical and quantitative liquid-state SERS analyzer, likened to a simple UV–Vis spectrometer, that is far superior to typical solid substrate-based or nanoparticle sol-based analysis.

The design and application of a liquid interfacial plasmonic platform promises for practical applications of surface-enhanced Raman scattering (SERS). Here, the authors report a reversible chloroform/water encasing strategy to self-assemble metal liquid-like 3D gold nanorod arrays with attractive SERS capability.

Ultrasensitive Au Nanooctahedron Micropinball Sensor for Mercury Ions

Mercury ion (Hg²⁺) is one of the most toxic heavy metals that has severe adverse effects on the environment and human organs even at very low concentrations. Therefore, highly sensitive and selective detection of Hg²⁺ is desirable. Here, we introduce plasmonic micropinball constructed from Au nanooctahedron as a three-dimensional surface-enhanced Raman spectroscopy (SERS) platform, enabling ultrasensitive detection of trace Hg²⁺ ions. Typically, strong SERS signals could be obtained when the single-stranded DNA structure converts to the hairpin structure in the presence of Hg²⁺ ions, due to the formation of thymine (T)-Hg²⁺-T. As a result, the detection limit of Hg²⁺ ions is as low as 1 × 10^-16 M, which is far below compared to that reported for conventional analytical strategies. Moreover, to achieve rapid multiple detection, we combine the micropinball sensors with microflow tube online detection. Our platform prevents cross-talk and tube contamination, allowing multiassay analysis, rapid identification, and quantification of different analytes and concentrations across separate phases.

Facing Challenges in Real-Life Application of Surface-Enhanced Raman Scattering: Design and Nanofabrication of Surface-Enhanced Raman Scattering Substrates for Rapid Field Test of Food Contaminants

Surface-enhanced Raman scattering (SERS) is capable of detecting a single molecule with high specificity and has become a promising technique for rapid chemical analysis of agricultural products and foods. With a deeper understanding of the SERS effect and advances in nanofabrication technology, SERS is now on the edge of going out of the laboratory and becoming a sophisticated analytical tool to fulfill various real-world tasks. This review focuses on the challenges that SERS has met in this progress, such as how to obtain a reliable SERS signal, improve the sensitivity and specificity in a complex sample matrix, develop simple and user-friendly practical sensing approach, reduce the running cost, etc. This review highlights the new thoughts on design and nanofabrication of SERS-active substrates for solving these challenges and introduces the recent advances of SERS applications in this area. We hope that our discussion will encourage more researches to address these challenges and eventually help to bring SERS technology out of the laboratory.

Sensitive and uniform detection using Surface-Enhanced Raman Scattering: Influence of colloidal-droplets evaporation based on Au-Ag alloy nanourchins

Surface Enhanced Raman Scattering (SERS) has been developed into a powerful vibrational spectroscopy technique for chemical detection. However, the fabrication of colloidal droplets-based SERS substrates with well reproducibility and uniformity still remains challenging. In this paper, colloidal suspensions of hollow Au-Ag alloy nanourchins (HAAA-NUs) and Au nanoparticles (Au NPs) with different morphologies were employed as SERS-active substrates. After evaporation of colloidal suspensions, we evaluated the SERS performance based on the following features: "Coffee Ring Effects", adsorption processes of probe molecule and colloidal NPs, spin coating and morphologies of suspended NPs. The results demonstrated that SERS signals could be enhanced enormously in the marginal region of Coffee Ring patterns. The limit of detection (LOD) for amaranth molecule would be reached 10^-8 M. Moreover, by combining the droplets evaporation of HAAA-NUs suspensions with spin coating, the relative standard deviation (RSD) could be down to 3.5%, showing excellent reproducibility. The investigation here would provide a simple, practical and portable SERS detection method with excellent signal uniformity.

Electrotunable nanoplasmonic liquid mirror

Recently, there has been a drive to design and develop fully tunable metamaterials for applications ranging from new classes of sensors to superlenses among others. Although advances have been made, tuning and modulating the optical properties in real time remains a challenge. We report on the first realization of a reversible electrotunable liquid mirror based on voltage-controlled self-assembly/disassembly of 16 nm plasmonic nanoparticles at the interface between two immiscible electrolyte solutions. We show that optical properties such as reflectivity and spectral position of the absorption band can be varied in situ within ±0.5 V. This observed effect is in excellent agreement with theoretical calculations corresponding to the change in average interparticle spacing. This electrochemical fully tunable nanoplasmonic platform can be switched from a highly reflective 'mirror' to a transmissive 'window' and back again. This study opens a route towards realization of such platforms in future micro/nanoscale electrochemical cells, enabling the creation of tunable plasmonic metamaterials.

Phonons spreading from laser-heated gold nanoparticle array accelerate diffusion of excitons in an underlying polythiophene thin film

Localized surface plasmon (LSP) photophysical phenomena occurring in metal nanostructures are often presented as a method to effectively couple light into photovoltaic devices of sub-wavelength-scale thickness. However, the excitation of LSP is also associated with rapid energy dissipation leading to local heating, which affects the excitation energy pathway. We studied a system consisting of a planar gold nanoparticle (AuNP) array deposited at the surface of a semiconducting polymer thin film (P3HT). We observed heat transfer from laser pulse excited AuNPs into the P3HT, which was evidenced as a long-living thermochromic effect on transient optical absorption. By modeling of the ultrafast kinetics of exciton population evolution, we determined that their decay was caused by their mutual annihilation. The decay rate was controlled by a phonon-assisted one-dimensional diffusion mechanism with a diffusion constant of 2.2 nm² ps^-1. The transferred heat resulted in an increase of the diffusion constant by a factor of almost 2, compared to the control system of P3HT without AuNPs. These results are of practical use for the design of plasmon-enhanced optoelectronic devices.

Self-assembly and redox induced phase transfer of gold nanoparticles at a water–propylene carbonate interface

Citrate-stabilized gold nanoparticles were found to spontaneously self-assemble into a lustrous film at a bare water–propylene carbonate interface after vigorous shaking, due to the extremely low interfacial tension. The presence of the electron donor, tetrathiafulvalene, in the oil phase, led to the extraction of particles into the organic phase.

Rapid One-Pot Preparation of Large Freestanding Nanoparticle-Polymer Films

2D arrays of metal nanoparticles formed at liquid-liquid interfaces have been fixed in situ to a thin polymer support to create freestanding large (cm² ) composite films where the particles remain exposed rather than being trapped within the polymer. Applications of these flexible robust 2D nanoparticle arrays as sensors, thin film conductors, antimicrobial coatings, and dip-in catalysts are shown.

A flexible transparent Ag-NC@PE film as a cut-and-paste SERS substrate for rapid in situ detection of organic pollutants

This report presents a simple and inexpensive fabrication approach to a flexible transparent composite film as a "cut-and-paste" surface-enhanced Raman scattering (SERS) substrate for in situ detection of organic pollutants. First, a self-assembled monolayer of Ag-nanocubes (Ag-NCs) is obtained at the air/water interface. Then, the Ag-NC monolayer is retrieved onto a flexible transparent polyethylene (PE) film to achieve an Ag-NC@PE composite film as a flexible SERS substrate. As the Ag-NCs in the monolayer are closely and uniformly packed on the PE film, the Ag-NC@PE composite film shows high SERS-activity with good signal homogeneity and reproducibility. Furthermore, the flexible transparent Ag-NC@PE composite film is "cut into" small pieces and directly "pasted" onto contaminated fruits for in situ SERS detection, as a result 10 nM thiram, 1 μM 4-polychlorinated biphenyl and 10 nM methyl parathion contaminants on oranges are detected, respectively. Therefore the Ag-NC@PE composite film is an inexpensive and effective SERS substrate for rapid in situ detection of organic pollutants in aqueous solutions, on fruits and other solid objects.

A Method for Promoting Assembly of Metallic and Nonmetallic Nanoparticles into Interfacial Monolayer Films

Two-dimensional metal nanoparticle arrays are normally constructed at liquid-oil interfaces by modifying the surfaces of the constituent nanoparticles so that they self-assemble. Here we present a general and facile new approach for promoting such interfacial assembly without any surface modification. The method use salts that have hydrophobic ions of opposite charge to the nanoparticles, which sit in the oil layer and thus reduce the Coulombic repulsion between the particles in the organic phase, allowing the particles to sit in close proximity to each other at the interface. The advantage of this method is that because it does not require the surface of the particles to be modified it allows nonmetallic particles including TiO2 and SiO2 to be assembled into dense interfacial layers using the same procedure as is used for metallic particles. This opens up a route to a new family of nanostructured functional materials.

Surface-Enhanced Raman Spectroscopy as a Probe of the Surface Chemistry of Nanostructured Materials

Surface-enhanced Raman spectroscopy (SERS) is now widely used as a rapid and inexpensive tool for chemical/biochemical analysis. The method can give enormous increases in the intensities of the Raman signals of low-concentration molecular targets if they are adsorbed on suitable enhancing substrates, which are typically composed of nanostructured Ag or Au. However, the features of SERS that allow it to be used as a chemical sensor also mean that it can be used as a powerful probe of the surface chemistry of any nanostructured material that can provide SERS enhancement. This is important because it is the surface chemistry that controls how these materials interact with their local environment and, in real applications, this interaction can be more important than more commonly measured properties such as morphology or plasmonic absorption. Here, the opportunity that this approach to SERS provides is illustrated with examples where the surface chemistry is both characterized and controlled in order to create functional nanomaterials.

Self-healing gold mirrors and filters at liquid-liquid interfaces

The optical and morphological properties of lustrous metal self-healing liquid-like nanofilms were systematically studied for different applications (e.g., optical mirrors or filters). These nanofilms were formed by a one-step self-assembly methodology of gold nanoparticles (AuNPs) at immiscible water-oil interfaces, previously reported by our group. We investigated a host of experimental variables and herein report their influence on the optical properties of nanofilms: AuNP mean diameter, interfacial AuNP surface coverage, nature of the organic solvent, and nature of the lipophilic organic molecule that caps the AuNPs in the interfacial nanofilm. To probe the interfacial gold nanofilms we used in situ (UV-vis-NIR spectroscopy and optical microscopy) as well as ex situ (SEM and TEM of interfacial gold nanofilms transferred to silicon substrates) techniques. The interfacial AuNP surface coverage strongly influenced the morphology of the interfacial nanofilms, and in turn their maximum reflectance and absorbance. We observed three distinct morphological regimes; (i) smooth 2D monolayers of "floating islands" of AuNPs at low surface coverages, (ii) a mixed 2D/3D regime with the beginnings of 3D nanostructures consisting of small piles of adsorbed AuNPs even under sub-full-monolayer conditions and, finally, (iii) a 3D regime characterised by the 2D full-monolayer being covered in significant piles of adsorbed AuNPs. A maximal value of reflectance reached 58% in comparison with a solid gold mirror, when 38 nm mean diameter AuNPs were used at a water-nitrobenzene interface. Meanwhile, interfacial gold nanofilms prepared with 12 nm mean diameter AuNPs exhibited the highest extinction intensities at ca. 690 nm and absorbance around 90% of the incident light, making them an attractive candidate for filtering applications. Furthermore, the interparticle spacing, and resulting interparticle plasmon coupling derived optical properties, varied significantly on replacing tetrathiafulvalene with neocuproine as the AuNP capping ligand in the nanofilm. These interfacial nanofilms formed with neocuproine and 38 nm mean diameter AuNPs, at monolayer surface coverages and above, were black due to aggregation and broadband absorbance.

Assembling substrate-less plasmonic metacrystals at the oil/water interface for multiplex ultratrace analyte detection

Designing substrate-less plasmonic metacrystals for the multiplex ultratrace detection of analytes from both organic and aqueous phases.

Green method to fabricate porous microspheres for ultrasensitive SERS detection using UV light

A green method to fabricate porous polymer microspheres with SERS activity for ultrasensitive SERS detection using UV light.

One-step synthesis and applications of highly concentrated silver nanoparticles with an ultra-thin silica shell

One-step synthesis resulting in highly concentrated silver nanoparticles with ultra-thin silica shell that were used for SERS & chemiresistor applications.

Surface enhanced Raman scattering by graphene-nanosheet-gapped plasmonic nanoparticle arrays for multiplexed DNA detection

We have developed a new type of surface enhanced Raman scattering (SERS) substrate with thiolated graphene oxide (tGO) nanosheets sandwiched between two layers of closely packed plasmonic nanoparticles. The trilayered substrate is built up through alternative loading of interfacially assembled plasmonic nanoparticle arrays and tGO nanosheets, followed by coating the nanoparticle surfaces with poly(ethylene glycol) (PEG). Here tGO plays multifunctional roles as a 2D scaffold to immobilized interfacially assembled plasmonic nanoparticles, a nanospacer to create SERS-active nanogaps between two layers of nanoparticle arrays, and a molecule harvester to enrich molecules of interest viaπ-π interaction. In particular, the molecule harvesting capability of the tGO nanospacer and the stealth properties of PEG coating on the plasmonic nanoparticles collectively lead to preferential positioning of selective targets such as aromatic molecules and single-stranded DNA at the SERS-active nanogap hotspots. We have demonstrated that an SERS assay based on the PEGylated trilayered substrate, in combination with magnetic separation, allows for sensitive, multiplexed "signal-off" detection of DNA sequences of bacterial pathogens.