Electrochemiluminescence Ratiometry: A New Approach to DNA Biosensing

Dual "on-off" signal conversion strategy based on surface plasmon coupling and resonance energy transfer for visual electrochemiluminescence ratiometric analysis of MiRNA-141

An electrochemiluminescence (ECL) biosensor with a pair of new ECL emitters and a novel sensing mechanism was designed for the high-sensitivity detection of microRNA-141 (miRNA-141). Sulfur-doped boron nitrogen quantum dots (S-BN QDs) were initially employed to modify the cathode of the bipolar electrode (BPE), while the anode reservoir was [Ir(dfppy)2(bpy)]PF6/TPrA system. The next step involved attaching H1-bound ultra-small WO3-x nanodots (WO3-x NDs) to the S-BN QDs-modified BPE cathode via DNA hybridization. A strong surface plasmon coupling (SPC) effect was observed between S-BN QDs and WO3-x NDs, which allowed for the enhancement of the red and visible ECL emission from S-BN QDs. After target-induced cyclic amplification to produce abundant Zn2+ and Au NPs-DNA3-Au NPs (Au NPs-S3-Au NPs), Zn2+ could cleave DNA at a nucleotide sequence-specific recognition site to release the WO3-x NDs, resulting in the first diminution of cathode ECL signal and the first enhancement of anode ECL signal. Moreover, the ECL signal at cathode decreased for the second time and the emission of [Ir(dfppy)2(bpy)]PF6 was continuously enhanced after the introduction of Au nanoparticles-S3-Au nanoparticles on the cathode surface. Our sensing mode with a dual "on-off" signal conversion strategy shows a good detection capability for miRNAs ranging from 10-17 to 10-10 M, with a limit of detection (LOD) as low as 10-17 M, which has great application potential in biomedical research and clinical diagnosis.

Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 μM in the wide range of 0.01 μM-40,000 μM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

Potential-Resolved Ratiometric Aptasensor for Sensitive Acetamiprid Analysis Based on Coreactant-free Electrochemiluminescence Luminophores of Gd-MOF and "Light Switch" Molecule of [Ru(bpy)2dppz]2

For conventional potential-resolved ratiometric electrochemiluminescence (ECL) systems, the introduction of multiplex coreactants is imperative. However, the undesirable interactions between different coreactants inevitably affect analytical accuracy and sensitivity. Herein, through the coordination of aggregation-induced emission ligands with gadolinium cations, the self-luminescent metal-organic framework (Gd-MOF) is prepared and serves as a novel coreactant-free anodic ECL emitter. By the intercalation of [Ru(bpy)2dppz]2+ with light switch effect into DNA duplex, one high-efficiency cathodic ECL probe is obtained using K2S2O8 as a coreactant. In the presence of acetamiprid, the strong affinity between the target and its aptamer induces the release of [Ru(bpy)2dppz]2+, resulting in a decreasing cathode signal and an increasing anode signal owing to the ECL resonance energy transfer from Gd-MOF to [Ru(bpy)2dppz]2+. In this way, an efficient dual-signal ECL aptasensor is constructed for the ratiometric analysis of acetamiprid, exhibiting a remarkably low detection limit of 0.033 pM. Strikingly, by using only one exogenous coreactant, the cross interference from multiple coreactants can be eliminated, thus improving the detection accuracy. The developed high-performance ECL sensing platform is successfully applied to monitor the residual level of acetamiprid in real samples, demonstrating its potential application in the field of food security.

A review on recent advances in assays for DNMT1: a promising diagnostic biomarker for multiple human cancers

The abnormal expression of human DNA methyltransferases (DNMTs) is closely related with the occurrence and development of a wide range of human cancers. DNA (cytosine-5)-methyltransferase-1 (DNMT1) is the most abundant human DNA methyltransferase and is mainly responsible for genomic DNA methylation patterns. Abnormal expression of DNMT1 has been found in many kinds of tumors, and DNMT1 has become a valuable target for the diagnosis and drug therapy of diseases. Nowadays, DNMT1 has been found to be involved in multiple cancers such as pancreatic cancer, breast cancer, bladder cancer, lung cancer, gastric cancer and other cancers. In order to achieve early diagnosis and for scientific research, various analytical methods have been developed for qualitative or quantitative detection of low-abundance DNMT1 in biological samples and human tumor cells. Herein, we provide a brief explication of the research progress of DNMT1 involved in various cancer types. In addition, this review focuses on the types, principles, and applications of DNMT1 detection methods, and discusses the challenges and potential future directions of DNMT1 detection.

Tetrahedral DNA nanostructure-corbelled click chemistry-based large-scale assembly of nanozymes for ratiometric fluorescence assay of DNA methyltransferase activity

Ligation efficiency in a surface-based DNA click chemistry (CuAAC) reaction is extremely restricted by the orientation and density of probes arranged on a heterogeneous surface. Herein, we engineer DNA tetrahedral nanostructure (DTN)-corbelled click chemistry to trigger a hybridization chain reaction (HCR) assembling a large-scale of nanozymes for ratiometric fluorescence detection of DNA adenine methyltransferase (Dam). In this study, a DNA tetrahedron structure with an alkynyl modifying pendant DNA probe (Alk-DTN) is designed and assembled on a magnetic bead (MB) as a scaffold for click chemistry. When a CuO NP-encoded magnetic nanoparticle (CuO-MNP) substrate was methylated by Dam, CuO NPs were released and turned into a mass of Cu+. The Cu+ droves azido modifying lDNA (azide-lDNA) to connect with the Alk-DTN probe on the MB through the click reaction, forming an intact primer to initiate the HCR. The HCR product, a rigid structure double-stranded DNA, periodically assembles glucose oxidase mimicking gold nanoparticles (GNPs) into a large-scale of nanozymes for catalyzing the oxidation of glucose to H2O2. NH2-MIL-101 MOFs, a fluorescent indicator and a biomimetic catalyst, activated the product H2O2 to oxidize o-phenylenediamine (oPD) into visually detectable 2,3-diaminophenazine (DAP). The change of the signal ratio between DAP and NH2-MIL-101 is proportional to the methylation event corresponding to the MTase activity. In this study, the DTN enhances the efficiency of the surface-based DNA click reaction and maintains the catalytic activities of gold nanoparticle nanozymes due to the intrinsic nature of mechanical rigidity and well-controlled orientation and well-adjusted size. Large-scale assembly of nanozymes circumvents the loss of natural enzyme activity caused by chemical modification and greatly improves the amplification efficiency. The proposed biosensor displayed a low detection limit of 0.001 U mL-1 for Dam MTase due to multiple amplification and was effective in real samples and methylation inhibitor screening, providing a promising modular platform for bioanalysis.

Cu-MOFs/GOx Bifunctional Probe-Based Synergistic Signal Amplification Strategy: Toward Highly Sensitive Closed Bipolar Electrochemiluminescence Immunoassay

A closed bipolar electrochemiluminescence (BP-ECL) platform for sensitive prostate specific antigen (PSA) detection was proposed based on a novel synergistic signal amplification strategy. Specifically, glucose oxidase-loaded Cu-based metal-organic frameworks (Cu-MOFs/GOx) as bifunctional probes were bridged on the anodic interface with the target PSA as the intermediate unit. In virtue of the large loading capacity of Cu-MOFs, a large amount of a co-reactant, i.e., H₂O₂ in this L-012-based ECL system and gluconic acid were generated on the anodic pole in the presence of glucose. The generated gluconic acid could effectively degrade the Cu-MOFs to release Cu²⁺ which greatly accelerates the formation of highly active intermediates from co-reactant H₂O₂, boosting the ECL intensity. As for the cathodic pole, K₃Fe(CN)₆ with a lower reduction potential is used to reduce the driving voltage and speed up the reaction rate, further strengthening the ECL intensity. Thanks to the synergistic signal amplification effect at both two electrode poles of the BP-ECL system, highly sensitive detection of PSA was realized with a detection limit of 5.0 × 10^-14 g/mL and a wide linear range of 1.0 × 10^-13-1.0 × 10^-7 g/mL. The strategy provides a novel way for signal amplification in the BP-ECL biosensing field.

Fabrication of a ratiometric electrochemiluminescence biosensor using single self-enhanced nanoluminophores for the detection of spermine

A ratiometric electrochemiluminescence strategy using a single luminophore for accurate and sensitive biomolecule detection could be immensely valuable in bioanalysis. Herein, an ultrasensitive ratiometric electrochemiluminescence sensing system was fabricated using a self-enhanced luminophore with dual-signal emission for the detection of spermine. A nanocomposite was synthesized by the covalent attachment of N, N-diisopropylethylenediamine onto glutathione-protected Au-Ag bimetallic nanoclusters (DPEA-GSH@Au/Ag BNCs). The nanocomposite exhibited efficient intra-cluster charge transfer to produce strong anodic self-enhanced electrochemiluminescence emission at 0.8 V without external co-reactants. Interestingly, the DPEA@GSH@Au-Ag BNCs exhibited cathodic electrochemiluminescence emission upon the addition of the co-reactant potassium persulfate at -1.6 V, exhibiting stable and efficient dual-signal electrochemiluminescence emission features at a continuous potential window of -1.75 to 1.2 V. Thus, they were used to fabricate a single-luminophore electrochemiluminescence sensor with dual emission. The cathodic emission of the biosensor gradually increased with increasing concentrations of spermine, whereas the anodic electrochemiluminescence intensity remained almost constant, enabling the ratiometric detection of spermine. The fabricated biosensor, with an internal standard, significantly improved the accuracy and reliability of spermine detection in a wide concentration range of 0.85 pM-100 μM, with a low limit of detection of 0.12 pM (S/N = 3) under optimum conditions. This single-luminophore electrochemiluminescence sensing system could be used for the detection of spermine and could guide the construction of ratiometric electrochemiluminescence sensors in the future.

Ratiometric Electrochemiluminescence Sensing of Carcinoembryonic Antigen Based on Luminol

Ratiometric electrochemiluminescence (ECL) sensors can efficiently remove environmental interference to attain precise detection. Nonetheless, two eligible luminophores or coreactants were usually needed, increasing the complexity and restricting their practical application. In this study, a single luminophore of luminol with a single coreactant of H₂O₂ was employed to construct a dual-potential ratiometric ECL sensor for the detection of carcinoembryonic antigen (CEA). The produced palladium nanoclusters (Pd NCs) employing a DNA duplex as a template could not only stimulate luminol to produce cathodic ECL (I_cathodic) but also quench its anodic ECL (I_anodic). During the detection process, CEA could damage the double-stranded structure and reduce the Pd NCs' amount, triggering a significant decrease in the ratio of I_cathodic to I_anodic (I_cathodic/I_anodic) and thereby achieving sensitive CEA's detection. Furthermore, the I_cathodic/I_anodic was independent of the H₂O₂ concentration, which avoided a prejudicial effect from H₂O₂ decomposition and considerably enhanced the detection's reliability. The developed ratiometric ECL sensor demonstrated a sensitive detection toward CEA with a wide linear range from 100 ag/mL to 10 ng/mL and a detection limit of 87.1 ag/mL (S/N = 3). In conclusion, this study offers a new idea for constructing ratiometric ECL sensors based on a single luminophore and technical support for cancer's early diagnosis.

Dual-potential electrochemiluminescent film constructed from single AIE luminogens for the sensitive detection of malachite green

Exploiting efficient electrochemiluminescent (ECL) luminogens is crucial for the development of high-performance ECL sensors. Herein, a kind of efficient luminogen (BTPEBT) consisting of benzothiadiazole (BTD) as an electron acceptor and tetraphenylethylene (TPE) as an electron donor was facilely synthesized through a one-step Suzuki reaction. BTPEBT showed typical aggregation-induced emission (AIE) effects with a high solid-state quantum yield of 69.8%. The fabricated solid-state ECL film that is based on single AIE luminogens presented unique dual-potential ECL properties for the first time. The bright ECL of this film could be observed by the naked eye with a satisfactory ECL efficiency of 22.8%. The dense ECL film showed a low electron-transfer resistance, which favors electron transfer among AIE luminogens, electrolytes and the electrode, giving rise to bright ECL emission. The bright ECL film was developed as an ECL sensor for the sensitive and selective detection of malachite green (MG) in a broad linear range from 10^-10 to 10^-5 M. The limit of detection (LOD) was as low as 7.6 × 10^-11 M. Moreover, the ECL sensing platform was further employed to detect MG in a real fish tissue sample with high sensitivity and good specificity. More importantly, the recycled BTPEBT film had good reproducibility for MG detection. The novel dual-potential ECL film constructed from single AIE luminogens provides a promising platform for the sensitive detection of MG in the food industry.

Ratiometric electrochemical detection of miRNA based on DNA nanomachines and strand displacement reaction

MicroRNAs (miRNAs) play an important role in regulating gene expression in cells. Abnormal expression of miRNAs has been associated with a variety of diseases. A ratiometric electrochemical method for miRNA detection based on DNA nanomachines and strand displacement reaction was developed. Signal probe with ferrocene label and reference probe with methylene blue label were immobilized on gold nanoparticle (AuNP)-coated magnetic microbeads (AuNP-MMBs). The miRNA triggers the strand displacement reaction and forms a duplex with the protect probe, releasing one end of the DNA walker (DW); the released DW hybridizes with the ferrocene (Fc)-labeled signal probe. The signal probe detached from AuNP-MMBs upon cleavage of the Nb.BbvCI enzyme. The oxidation peak of MB moieties on the reference probe remains unchanged and the signals of Fc moieties on the signal probe are inversely proportional to the concentrations of miRNA. The ratio between Fc moieties at 0.35 V and MB moieties at -0.22 V (vs. Ag/AgCl) was used to quantify the expression level of miRNA with a detection limit down to 0.12 fM. The ratiometric assay possesses a strong ability to eliminate interference from environmental changes, thus offering the high selectivity of miRNA from the complexed biosystems, holding great significance for miRNA sensing. A ratiometric assay with high selectivity of miRNA has been developed based on DNA nanomachines and strand displacement reaction.

A pH-engineering regenerative DNA tetrahedron ECL biosensor for the assay of SARS-CoV-2 RdRp gene based on CRISPR/Cas12a trans-activity

In this work, we constructed an exonuclease III cleavage reaction-based isothermal amplification of nucleic acids with CRISPR/Cas12a-mediated pH-induced regenerative Electrochemiluminescence (ECL) biosensor for ultrasensitive and specific detection of SARS-CoV-2 nucleic acids for SARS-CoV-2 diagnosis. The triple-stranded nucleic acid in this biosensor has an extreme dependence on pH, which makes our constructed biosensor reproducible. This is essential for effective large-scale screening of SARS-CoV-2 in areas where resources are currently relatively scarce. Using this pH-induced regenerative biosensor, we detected the SARS-CoV-2 RdRp gene with a detection limit of 43.70 aM. In addition, the detection system has good stability and reproducibility, and we expect that this method may provide a potential platform for the diagnosis of COVID-19.

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)3]2+) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)3]3- (where sppy = 5'-sulfo-2-phenylpyridinato-C 2,N), through a novel 'redox mediator' pathway. Moreover, the concomitant green emission of [Ir(sppy)3]3-* enables internal standardisation of the co-reactant ECL of [Ru(bpy)3]2+. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

Electrogenerated chemiluminescence sensor for silver ions based on their coordination interaction with cucurbit[6]uril

Strong luminol ECL was obtained at the Q[6]/GCE. The interaction between Ag+ and Q[6] could decrease ECL signal. An ECL sensor for the detection of Ag+ was proposed based on the competitive interaction between luminol, silver ions and Q[6].

An electrochemiluminescence dual “turn-on” strategy for alkaline phosphatase detection using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework

An electrochemiluminescence (ECL) dual “turn-on” strategy is first designed to detect alkaline phosphatase (ALP) using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework (Ru(bpy)32+@ZIF-90).

Coreactant-Free and Direct Electrochemiluminescence from Dual-Stabilizer-Capped InP/ZnS Nanocrystals: A New Route Involving n-Type Luminophore

Electrochemiluminescence (ECL) is conventionally generated in either an annihilation or a coreactant route, and the overwhelming majority of ECL research is conducted in the coreactant route via oxidizing or reducing the coexisting coreactant and luminophore. The coreacant-free ECL generated via merely oxidizing the luminophore would break through the ceiling of coreactant ECL via excluding the detrimental effects of exogenous coreactant and dissolved oxygen. Herein, by exploiting the rich-electron nature of n-type nanocrystals (NCs), coreacant-free ECL is achieved via merely oxidizing 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) capped InP/ZnS NCs, i.e., InP/ZnS_MPA-MSA. The electron-rich InP/ZnS_MPA-MSA can be electrochemically injected with holes via two oxidative processes at around +0.75 and +1.37 V (vs Ag/AgCl), respectively, and the exogenous hole can directly combine the conduction band (CB) electron of InP/ZnS_MPA-MSA, resulting in two coreactant-free ECL processes without employing any exogenous coreactant. The deprotonation process for the carboxyl group of the capping agents can provide a negatively charged surface to InP/ZnS_MPA-MSA and enhance the coreactant-free ECL. The hole-injecting process at +1.37 is much stronger than that at +0.75 V and eventually enables an ∼2000-fold enhanced ECL at +1.37 V than that at +0.75 V. The ECL at +1.37 V can be utilized for coreactant-free ECL immunoassay with prostate-specific antigen (PSA) as analyte, which exhibits an acceptable linear response from 5 pg·mL^-1 to 1 ng·mL^-1 with a limit of detection of 0.3 pg·mL^-1. The coreactant-free ECL route would provide an alternative to both annihilation and coreactant routes, simplify the ECL assay procedure and deepening the ECL mechanism investigations.

Recent advances and perspectives of enzyme-based optical biosensing for organophosphorus pesticides detection

The overuse or abuse of organophosphorus pesticides (OPs) can bring about severe contamination problems in foodstuff and the environment, which will seriously threaten human health and the ecosystem's cycle. Hence, it is in high demand to establish sensitive, portable, specific, and cost-effective methods for monitoring OPs to control food safety, protect the ecosystem, and prevent disease. The optical biosensor with enzyme as bio-recognition elements has been an effective alternative for OPs detection. Herein, we firstly introduce various enzymes, sensing mechanisms, advantages and disadvantages used as bio-recognition elements in optical sensing for OPs detection. Then, we review various optical biosensing strategies based on enzymes as recognition elements that were ingeniously designed and successfully utilized for OPs detection, with a particular emphasis on photoluminescence (PL), chemiluminescence (CL), electrochemiluminescence (ECL), and colorimetric (CM) biosensing strategies. We not only highlight the state-of-art developments and the construction strategies of the enzyme-based optical biosensing method but also summarize the existing deficiencies, current challenges, and the future perspectives of OPs detection.

Plasmon-Boosted Cu-Doped TiO2 Oxygen Vacancy-Rich Luminol Electrochemiluminescence for Highly Sensitive Detection of Alkaline Phosphatase

In this study, an effective oxygen vacancy (O_v)-involved luminol-dissolved oxygen (O₂) electrochemiluminescence (luminol-DO ECL) system was developed and exploited for ECL sensing applications through significant plasmon enhancement of the O_v-involved weak luminol-DO ECL signals by the combined use of Cu-doped TiO₂ oxygen vacancy and a Au@SiO₂ nanomembrane. The results disclosed that the ECL response of the corresponding system could be synergistically boosted, and the plausible underlying mechanism has been discussed. Furthermore, for the first time, the developed system has been successfully applied for the highly sensitive detection of alkaline phosphatase with a low limit of detection of 0.005 U/L, with an excellent linear range from 0.005 to 10 U/L, as well as good stability and reproducibility.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

Zinc-Metal Organic Frameworks: A Coreactant-free Electrochemiluminescence Luminophore for Ratiometric Detection of miRNA-133a

Developing a coreactant-free ratiometric electrochemiluminescence (ECL) strategy based on a single luminophore to achieve more accurate and sensitive microRNA (miRNA) detection is highly desired. Herein, utilizing zinc-metal organic frameworks (Zn-MOFs) as the single luminophore, a novel dual-potential ratiometric ECL biosensor was constructed for ultrasensitive detection of miRNA-133a. The as-prepared Zn-MOFs exhibited simultaneous cathode and anode ECL emission. Furthermore, the Zn-MOFs were confirmed to be a multichannel ECL sensing platform with excellent annihilation and coreactant ECL emission. The corresponding ECL behaviors were investigated in detail. Benefiting from the hybridization chain reaction (HCR) amplification technology, N,N-diethylethylenediamine (DEAEA) was modified on hairpin DNA, and the gained products loaded with quantities of DEAEA enhanced the anodic ECL intensity of Zn-MOFs. In the presence of miRNA-133a, the ECL intensity ratio of anode to cathode (I_a/I_c) was significantly increased, which realized the ultrasensitive ratiometric detection of miRNA-133a. In addition, without an exogenous coreactant, the biosensor revealed superb accuracy and stability. Under optimal conditions, the detection linearity of miRNA-133a was from 50 aM to 50 fM with a low detection limit of 35.8 aM (S/N = 3). This is the first work to use Zn-MOFs as a single emitter for reliable ratiometric ECL bioanalysis, which provides a new perspective for fabricating a ratiometric ECL biosensor platform.

Dual-potential electrochemiluminescence from black phosphorus and graphitic carbon nitrides for label-free enzymatic biosensing

Simultaneous anodic and cathodic electrochemiluminescence (ECL) emissions of black phosphorus nanosheets (BPNSs) and graphitic carbon nitrides (g-C₃N₄) were reported based on the co-existence of different co-reactants. Anodic ECL was obtained at the BPNSs modified electrode with tripropylamine (TPrA) as a co-reactant, while g-C₃N₄ was selected as another emitter to obtain cathodic ECL emission with K₂S₂O₈ as co-reactant. Employing the superiority of two separate ECL systems, a facile ECL method was developed for cholesterol detection based on cholesterol oxidase (ChOx) immobilized g-C₃N_4/BPNSs modified glassy carbon electrode (g-C₃N_4/BPNSs/GCE). False positive signals can be significantly reduced based on the separation of anode and cathode ECL signals from BPNSs and g-C₃N₄, respectively. The proposed biosensor provided a quantitative readout proportional to cholesterol concentrations in the range from 0.5 μM to 0.5 mM with a detection limit of 0.14 μM (cathodic system, 3σ, n = 6) and 0.32 μM (anodic system, 3σ, n = 6). The proposed biosensor demonstrated excellent analytical performance with remarkable sensitivity, manifesting its potential application in enzymatic biosensing field.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Bifunctional Moderator-Powered Ratiometric Electrochemiluminescence Enzymatic Biosensors for Detecting Organophosphorus Pesticides Based on Dual-Signal Combined Nanoprobes

The bifunctional moderator is urgently needed in the field of ratiometric electrochemiluminescence (ECL) sensing since it can mediate simultaneously two ECL signals to conveniently realize their opposite change trend. This work designed a novel dual-signal combined nanoprobe with carboxyl-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1',3}-thiadazole)] nanoparticles (c-PFBT NPs) as the anodic ECL probe and L-cysteine capped CdS quantum dots (L-CdS QDs) as the cathodic ECL probe, which performed a dual-signal output capability without any additional coreactants. More importantly, hydrogen peroxide (H2O2) produced in situ by enzyme-catalyzed reaction was developed as a bifunctional moderator for simultaneously regulating two signals. The dual-signal combined nanoprobe (c-PFBT NPs@CdS QDs) served as the matrix to immobilize acetylcholinesterase (AChE) and choline oxidase for organophosphorus (OPs) analysis. In the absence of OPs, H2O2 was produced by catalyzing the substrate acetylthiocholine (ATCl) with enzymes and it quenched the anodic ECL signal from c-PFBT NPs and simultaneously promoted the cathodic ECL signal from L-CdS QDs. When OPs was present, the activity of AChE was inhibited, the anodic signal would increase, and the cathodic signal would accordingly decrease. The integration of the bifunctional moderator H2O2 and dual-signal combined nanoprobe c-PFBT NPs@CdS QDs not only provides an attractive ECL platform for enzymatic sensing involving the generation or consumption of H2O2 but also paves a new pathway for other ratiometric ECL systems involving enzyme catalytic amplification for detecting antigens, antibodies, DNA, RNA, etc.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Enhanced electrochemiluminescence ratiometric cytosensing based on surface plasmon resonance of Au nanoparticles and nanosucculent films

Ramos cells are human Burkitt's lymphoma cells, which are a kind of cancer cells to facilitate the monitoring of the relevant biological processes of cancers. Sensitive and accurate detection of Ramos cells using emerging ratiometric ECL biosensing technology shows increasing importance, however, the target analytes of current ratiometric ECL biosensors are mainly limited to DNA/RNA or proteins. In this study, we proposed a dual-potential ratiometric sensing strategy for the electrochemiluminescence detection of Ramos cells based on two types of electrochemiluminescence (ECL)-responding molecular. Au nanosucculent films (AuNFs) were electrodeposited on the fluorine doped tin oxide (FTO) electrode to increase the effective area of the electrode for more efficient assembly of DNA and effectively improving the conductivity of the sensing interfaces. In the presence of Ramos cells, aptamers capped with Au@luminol would conjugate with Ramos cells and then remove from AuNFs, accompanying the decrease of ECL signal from Au@luminol. Then, Au-DNA was captured and alternately hybridized with DNA-modified CdS nanocrystals (NCs) on the surface of AuNFs with the formation of a super reticulate structure. The reticulate structure not only raised another identified ECL signal from CdS NCs but also greatly promoted its ECL intensity from the surface plasmon resonance originating from Au NPs. The value of log (ECL_CdS/ECL_luminol) and the logarithm of the number of cells exhibit considerable linear relation ranging from 80 to 8 × 10⁵ cells mL^-1 with a low detection limit of 20 cells mL^-1 (S/N = 3). The selectivity and specificity of this dual-potential ECL sensor showed good performance and indicated considerable promise in avoiding false-positive results in detection.

DNA-targeted formation and catalytic reactions of DNAzymes for label-free ratiometric electrochemiluminescence biosensing

A label-free ratiometric electrochemiluminescence (ECL) sensing strategy for the sensitive detection of target DNA (T-DNA) was proposed on the basis of G-quadruplex/hemin-regulated ECL emissions of CdS quantum dots (QDs) and luminol with their common coreactant of H₂O₂. The ECL biosensor was constructed through stepwise assemblies of CdS QDs and hairpin DNA (H-DNA) on a glassy carbon electrode, and subsequent introduction of T-DNA resulted in the development of G-quadruplex/hemin DNAzymes via the specific recognition of T-DNA and H-DNA in the presence of hemin and K⁺ ions. The formed DNAzymes not only prompted the catalytic oxidation of hydroquinone followed by deposition of insoluble oxidation oligomers on the electrode surface to attenuate the cathodic ECL emission of CdS QDs but also triggered the catalytic oxidation of luminol to enhance the anodic ECL emission. The label-free ratiometric ECL biosensor for the detection of T-DNA showed a wide response range from 1 to 10,000 fM (10^-15 M) with a low detection limit of 0.2 fM and exhibited excellent selectivity against mismatched base sequences. This work provides a reliable and sensitive sensing platform for the detection of targets in analytical community by means of rational design of DNA sequences.

A Review on van der Waals Boron Nitride Quantum Dots

Boron nitride quantum dots (BNQDs) have gained increasing attention for their versatile fluorescent, optoelectronic, chemical, and biochemical properties. During the past few years, significant progress has been demonstrated, started from theoretical modeling to actual application. Many interesting properties and applications have been reported, such as excitation-dependent emission (and, in some cases, non-excitation dependent), chemical functionalization, bioimaging, phototherapy, photocatalysis, chemical, and biological sensing. An overview of this early-stage research development of BNQDs is presented in this article. We have prepared un-bias assessments on various synthesis methods, property analysis, and applications of BNQDs here, and provided our perspective on the development of these emerging nanomaterials for years to come.

A ratiometric electrochemiluminescent cytosensor based on polyaniline hydrogel electrodes in spatially separated electrochemiluminescent systems

Here, we proposed a ratiometric electrochemiluminescent (ECL) strategy in spatially multiplied ECL systems. By the specific recognition of hyaluronic acid with proteoglycan CD44 and epidermal growth factor with epidermal growth factor receptor on the cell surface, the cells were labelled with potential-resolved ECL probes, namely Ru(bpy)₃²⁺ and g-C₃N₄, respectively. The as-proposed cytosensor provides a multichannel ECL protocol to improve the throughput, which may push the application of ECL for the cellular immunoanalysis.

Determination of ascorbic acid using electrochemiluminescence sensor based on nitrogen and sulfur doping graphene quantum dots with luminol as internal standard

A novel internal standard electrochemiluminescence (ECL) sensor has been designed for the detection of ascorbic acid (AA). The adopted dual-emission luminophore (NSGQDs-PEI-luminol-Pt) is composed of nitrogen and sulfur double-doped graphene quantum dots (NSGQDs, as the main luminophore), luminol (as the auxiliary luminophore and internal standard), platinum nanoparticles (Pt NPs, as the co-reaction accelerator), and polyetherimide (PEI, as the linker of NSGQDs and luminol). The results suggest obviously enhanced  ECL intensities by the Förster resonance energy transfer (FRET) between luminol (donor) and NSGQDs (acceptor). In this sensing system, the cathodic ECL intensities of NSGQDs (ECL-1, -1.8 V vs. Ag/AgCl) gradually decrease with increasing concentration of AA, while the anodic ECL intensities of luminol (ECL-2, 0.3 V vs. Ag/AgCl) almost remain essentially constant at a potential window from -2.0 to 0.4 V. The natural logarithm of the ratio between ECL-1 and ECL-2 (ln I _{(ECL-1/ECL-2)}) shows a good linear relationship with AA concentration ranging from 10 to 360 nM. The regression equation is ln I _{(ECL-1/ECL-2)} = - 0.0059 c_AA + 3.55 (R² = 0.992) with a limit of detection of 3.3 nM. Such sensor has also been applied for monitoring AA in human serum. The recovery range was 96.5-105.3% and the relative standard deviation was  1.3-3.3%.

Employing an Intercalated Redox Reporter in Electrochemical Aptamer-Based Biosensors to Enable Calibration-Free Molecular Measurements in Undiluted Serum

Electrochemical aptamer-based (E-AB) biosensors suffer from sensor-to-sensor signal variations due to the variation of the total number and the heterogeneity of probes immobilized on the electrode surface, with the former attracting more attention. As such, a calibration process to correct for such variations is required for this type of sensor, causing inconvenience and inaccessibility in harsh sensing environments such as blood samples, which has dramatically limited the widespread clinical use of biosensors. In response, here, we have adopted E-AB sensors to achieve calibration-free measurements of small biological/drug molecules. Specifically, we employ one probe-attached redox reporter and a second intercalated redox reporter to generate two signals, achieving good sensor-to-sensor reproducibility and thus obviating the need for calibration. We first demonstrated the capability of E-AB sensors for the accurate measurement of kanamycin, tobramycin, and adenosine triphosphate (ATP) in phosphate-buffered saline (PBS) buffer, achieving concentration ranges of approximately 4.7 × 10³-, 2.0 × 10³-, and 12.7-fold, respectively. Then, we applied this calibration-free approach to the measurement of these three target molecules directly in undiluted serum, achieving a concentration precision of a few micromolars.

Ratiometric Electrochemiluminescent/Electrochemical Strategy for Sensitive Detection of MicroRNA Based on Duplex-Specific Nuclease and Multilayer Circuit of Catalytic Hairpin Assembly

In this study, we proposed a ratiometric electrochemiluminescent (ECL)/electrochemical (EC) biosensor based on duplex-specific nuclease (DSN)-assisted target recycling and multilayer catalytic hairpin assembly (CHA) amplification cascades for the detection of microRNA (miRNA). The DSN-assisted target recycling transformed miRNAs into a large number of ssDNA, which then catalyzed a multilayer CHA amplification cascade to produce numerous long dsDNA duplexes H_n/H_n+1 (n = 2, 4, 6, ...). Then the H_n/H_n+1 displaced the ferrocene (Fc)-labeled ssDNA (S_x+1, x = 1, 3, 5, ...) to hybridize with the S_x sequence on the gold electrode surface. Consequently, a great number of long S_x/H_n/H_n+1 duplexes were immobilized for binding Ru(phen)₃²⁺ to obtain an amplified ECL signal. Meanwhile, the EC signal of Fc was reduced, and the quenching effect of Fc to ECL signal also decreased. By measuring the ratio of the ECL signal of Ru(phen)₃²⁺ to the EC signal of Fc, quantitative analysis of miRNA-499 with high accuracy and reproducibility was obtained. The ratiometric biosensor shows high sensitivity and a wide linear range of 6 orders of magnitude. With the help of DSN-assisted target recycling, this strategy can be easily extended to detect other miRNAs without redesigning the CHA cascade system. The proposed "hybrid" ratiometric ECL/EC strategy enriches the ratiometric sensors and can find extensive applications in bioanalysis, especially for multiplex detection.

A wavelength-resolved electrochemiluminescence resonance energy transfer ratiometric immunosensor for detection of cardiac troponin I

In this study, a wavelength-resolved electrochemiluminescence resonance energy transfer (ECL-RET) ratiometric immunosensor from Au nanoparticle functionalized graphite-like carbon nitride nanosheets (Au-g-C3N4) to Au nanoclusters (Au NCs) has been constructed for the first time. At a working voltage of 0 to -1.2 V, Au-g-C3N4 showed a strong cathodic ECL emission with a peak at 460 nm, which overlapped well with the absorption spectra of Au NCs thus stimulating the fluorescence emission of Au NCs at 610 nm. Moreover, within this voltage range, the Au NCs showed no ECL signal; therefore, they would not interfere with the detection of the system. We used cardiac troponin I (cTnI) as an analytical model to construct a sandwich immunosensor based on the ECL-RET ratiometric strategy. By measuring the responses of the ECL460 nm/FL610 nm ratio at different cTnI concentrations, the sensitive detection of cTnI with a wide range of 50 fg mL-1 to 50 ng mL-1 and a low detection limit of 9.73 fg mL-1 can be achieved. This work enriches the wavelength-resolved ECL-RET system and provides an innovative reference for the development of more efficient and sensitive ECL-RET ratiometry.

Recent advances in co-reaction accelerators for sensitive electrochemiluminescence analysis

In electrochemiluminescence sensing platforms, co-reaction accelerators are specific materials used to catalyze the dissociation of co-reactants into active radicals, which can significantly boost the ECL emission of luminophores.

Double-signal mode based on metal–organic framework coupled cascaded nucleic acid circuits for accurate and sensitive detection of serum circulating miRNAs

A double-signal mode based on metal–organic framework coupled cascaded nucleic acid circuits was developed for the accurate and sensitive detection of serum circulating miRNAs.

A dual-signal output ratiometric electrochemiluminescent sensor for NADH detection

Ratiometric electrochemiluminescence (ECL) has attracted great attention in the field of electrochemical analysis. In this study, a dual-signal-output ratiometric ECL sensor was developed for the detection of nicotinamide adenine dinucleotide (NADH). Nitrogen-doped graphene quantum dots (NGQDs) exhibit double ECL signal output capability, without the requirement of additional coreactants. NADH can amplify the anodic ECL response of NGQDs, while it can diminish the cathodic ECL response of NGQDs. Based on the principle between relative enhancing ECL intensity ratio and NADH concentrations, the constructed ratiometric ECL sensor was applied to NADH assays, with a wide concentration range of 10-400 μM and a low limit of detection (LOD) of 2.5 μM (S/N = 3). Furthermore, the proposed method was applied for the determination of spiked NADH, which was proved to be feasible in the biological sample matrix. The proposed strategy of modulating multiple-ECL signals of the single NGQD emitter not only provides a new ECL system for the accurate detection of NADH but also broadens the design pathway for ratiometric sensing fabrication.