Electrogenerated Chemiluminescence Resonance Energy Transfer between Luminol and CdSe@ZnS Quantum Dots and Its Sensing Application in the Determination of Thrombin

Electrochemiluminescent resonance energy transfer between amino-modified g-C3N4/Bi2MoO6 composite and carboxyl CoS2 nanoboxes for sensitive detection of alpha fetoprotein

This work demonstrates an effective quenching electrochemiluminescent (ECL) immunosensor based on resonance energy transfer for the sensitive detection of alpha fetoprotein (AFP). In this strategy, graphitic carbon nitride (g-C3N4) was coupled with bismuth molybdenum oxide (Bi2MoO6) to form a g-C3N4/Bi2MoO6 nanocomposite as a novel type of ECL immunosensor. The as-synthesized amino-modified g-C3N4/Bi2MoO6 nanocomposite presents strong and stable cathodic ECL activity compared to pristine g-C3N4. One plausible reason is that the synergistic effect between the g-C3N4 and Bi2MoO6 could facilitate charge transfer process and thereby enhancing the separation efficiency of electron-hole pairs. The other functional part of the immunosensor, carboxyl CoS2 nanoboxes with a broad absorption range, was rationally designed and introduced. The evidence that the absorption spectra of carboxyl CoS2 NBs overlap with ECL spectra of g-C3N4/Bi2MoO6 nanocomposite holds accountable for exceptionally weakened ECL signal. This sandwich-type immunosensor was setup based on quenching mechanism concerning amino-modified g-C3N4/Bi2MoO6 as an ECL donor and carboxyl CoS2 NBs as an ECL accepter. The strategy was optimized to achieve a convincible and sensitive detection goal for AFP with a wide quantifiable range of 0.5 pg/mL-10 ng/mL whilst a sufficiently low detection limit of 0.04 pg/mL (S/N = 3). This immunosensor shows great potential for real sample analysis with reasonable recoveries ranging from 95.5 to 99.0 %, demonstrating its high precision for AFP determination.

All-Optical Electrochemiluminescence at Metal-Insulator-Semiconductor Diodes

Pt/InGa/n-Si/SiOx/Pt devices were prepared by using standard chemical and sputtering processes. These systems are diodes comprising a frontside photoactive metal-insulator-semiconductor (MIS) n-Si/SiOx/Pt junction and a backside Pt/InGa/n-Si Ohmic contact. Pt/InGa/n-Si/SiOx/Pt was first characterized by dark-solid-state electrical and impedance measurements. Then, each side of the device was investigated by electrochemical means in the dark and under near-IR illumination at 850 nm in the luminol-H2O2 electrochemiluminescence (ECL) electrolyte. The results suggested the possibility of triggering an all-optical ECL (AO-ECL) at Pt/InGa/n-Si/SiOx/Pt. This was confirmed by studying AO-ECL at the monolithic, all-integrated Pt/InGa/n-Si/SiOx/Pt device, immersed in the ECL electrolyte. The conversion process can occur with good stability and the intensity of the visible emission (440 nm) depends on tunable parameters such as the illumination power density, O2 concentration, or the concentration of added H2O2. These results are important for the next developments of AO-ECL in sensing and microscopy.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

AgInZnS quantum dots as anodic emitters with strong and stable electrochemiluminescence for biosensing application

Quantum dots (QDs) have become promising electrochemiluminescence (ECL) emitters with high quantum yield and size-tunable luminescence. However, most QDs generate strong ECL emission at the cathode, developing anodic ECL-emitting QDs with excellent performance is challenging. In this work, low-toxic quaternary AgInZnS QDs synthesized by a one-step aqueous phase method were used as novel anodic ECL emitters. AgInZnS QDs exhibited strong and stable ECL emission and a low excitation potential, which could avoid the side reaction of oxygen evolution. Furthermore, AgInZnS QDs displayed high ECL efficiency (Φ_ECL) of 5.84, taking the Φ_ECL of Ru(bpy)₃²⁺/tripropylamine (TPrA) ECL system as 1. Compared to AgInS₂ QDs without Zn doping and traditional anode luminescent CdTe QDs, the ECL intensity of AgInZnS QDs was 1.62 times and 3.64 times higher than that of AgInS₂ QDs and CdTe QDs, respectively. As a proof-of-concept, we further designed an "on-off-on" ECL biosensor for detecting microRNA-141 based on a dual isothermal enzyme-free strand displacement reaction (SDR), which not only to achieve the cyclic amplification of the target and ECL signal, but also to construct a switch of the biosensor. The ECL biosensor had a wide linear range from 100 aM to 10 nM with a low detection limit of 33.3 aM. Together, the constructed ECL sensing platform is a promising tool for rapid and accurate diagnosis of clinical diseases.

Luminophore-Surface-Engineering-Enabled Low-Triggering-Potential and Coreactant-Free Electrochemiluminescence for Protein Determination

Coreactant-free electrochemiluminescence (ECL) is promising for removing the exogenous effects of coreactant and simplify the operation procedures and setups of commercialized ECL bioassays. Herein, an electrosterically involved strategy for achieving a low-triggering-potential (+0.21 V vs Ag/AgCl) and coreactant-free ECL from dual-stabilizer-capped CdTe nanocrystals (NCs) is proposed with mercaptopropionic acid (MPA) and hexametaphosphate (HMP) as the capping agents of luminophores. Upon employing the CdTe NCs as the ECL tag for the immunoassay, all the tags in the bioconjugates of the CdTe NCs and the secondary antibody (Ab₂|CdTe) as well as in the final achieved sandwich-type immunocomplexes can exhibit efficient coreactant-free ECL with an electrosterically involved triggering potential nature. The bioconjugates of Ab₂|CdTe with Ab₂ no more than 30 kDa, such as the thyroid stimulating hormone (30 kDa) and the recombinant pro-gastrin releasing peptide (ProGRP, 14 kDa), merely exhibit coreactant-free ECL around +0.24 V, while bioconjugates of Ab₂|CdTe with an Ab₂ beyond 30 kDa only give off coreactant-free ECL around +0.82 V. Due to the further enhanced electrosteric effect in sandwich-type immunocomplexes, only the ECL immunosensor with ProGRP as the target can give off coreactant-free ECL around +0.24 V. The electrosterically involved and coreactant-free ECL of CdTe NCs is consequently utilized to sensitively and selectively determine the molecular protein ProGRP, which demonstrates a wide linearity range from 0.1 to 2000 pg/mL and a low limit of detection at 0.05 pg/mL (S/N = 3). This low-triggering-potential and coreactant-free combined ECL platform indicates that engineering the surface of CdTe NCs with a protein can improve the performance of ECL tags in a protein-weight-involved electrosterical way.

DNAzyme-driven bipedal DNA walker for label-free and signal-on electrochemical detection of amyloid-β oligomer

As a common technique for detecting AβO, the enzyme-linked immunosorbent assay (ELISA) method is time-consuming, high in cost, and poor in stability. Therefore, it is necessary to develop a highly sensitive, method-simple and low-cost method for the selective detection of AβO. Here, we created a novel signal-on and label-free electrochemical aptamer sensor for the detection of AβO based on a DNAzyme-driven DNA bipedal walking strategy. Compared with common DNA walkers, bipedal DNA walkers exhibit larger walking areas and faster walking kinetics, and provide higher amplification efficiency. The DNAwalker is powered by an Mg²⁺-dependent DNAzyme, and the binding-induced DNAwalker continuously clamps the MB, unlocking several active G-quadruplex-forming sequences. These G-quadruplexes can be further combined by hemin to generate a G-quadruplex/heme complex, resulting in an amperometric signal, resulting in a broad proportional band from 0.1 pM to 1 nM and an excellent detection range of 46 fM. A bipedal DNA walker aptamer sensor can detect human serum AβO with remarkable specificity, high reproducibility and practical application value.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Lighting Up Electrochemiluminescence-Inactive Dyes via Grafting Enabled by Intramolecular Resonance Energy Transfer

Due to near-zero optical background and photobleaching, electrochemiluminescence (ECL), an optical phenomenon excited by electrochemical reactions, has drawn extensive attention, especially for ultrasensitive bioassays. Developing diverse ECL emitters is crucial to unlocking their multiformity and performances but remains a formidable challenge due to the rigorous requirements for ECL. Herein, we report a general strategy to light up ECL-inactive dyes in an aqueous solution via grafting, a well-developed concept for plant propagation since 500 BCE. As a proof of concept, a series of luminol donor-dye acceptor-based ECL emitters were grafted with near-unity resonance energy transfer (RET) efficiency and coarse/fine-tunable emission wavelengths. Rather than the sophisticated design of new skeleton-based molecules to meet all of the prerequisites for ECL in a constrained manner, each unit in the proposed ECL ensemble performed its functions maximally. As a result, beyond traditional two-dimensional (2D) ones, a three-dimensional (3D) coordinate biosensing system, simultaneously showing a calibration curve and selectivity, was established using the new ECL emitter. This lighting up strategy would generally address the scarcity of ECL emitters and enable unprecedented functions.

A spatially resolved ratiometric electrochemiluminescence immunosensor for myoglobin detection using Au@Ag2S as signal amplification tags

A spatially resolved ratiometric ECL immunosensor for myoglobin detection was developed via resonance energy transfer for signal amplification.

Photoelectrochemical aptasensing for thrombin based on exonuclease III-assisted recycling signal amplification and nanoceria enzymatic strategy

In the present work, a capture DNA (c-DNA) was immobilized on the TNA/g-C₃N₄ to develop a sensitive and selective TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor for determining thrombin. With the aid of the specific recognition of anti-thrombin aptamer towards thrombin, ingenious design of hairpin DNA, and exonuclease III-assisted recycling signal amplification, more nanoceria could be assembled on the TNA/g-C₃N₄/c-DNA to form TNA/g-C₃N₄/nanoceria in the presence of thrombin. Due to the oxidase-mimic catalytic efficiency of nanoceria and the oxygen consumption for glucose oxidation, the photoexcited electrons at the conduction band of g-C₃N₄ could be well transferred to that of TNA under visible light irradiation, resulting in the increase of the photocurrent of TNA/g-C₃N₄/nanoceria, and the increase value of photocurrent had a linear relationship with the concentration of thrombin under the optimal conditions. So, the constructed TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor exhibited a satisfactory quantitative range from 0.01 pM to 0.5 nM, low detection limit with 3.4 fM for thrombin determination, and was applied for the human serum analysis successfully with RSD of less than 4.8% and the recovery between 95% and 113%.

Rapid, ultrasensitive and non-enzyme electrochemiluminescence detection of hydrogen peroxide in food based on the ssDNA/g-C3N4 nanosheets hybrid

Hydrogen peroxide (H2O2) is usually used as a fungicide in food, it is carcinogenic, accelerates aging or inducing toxic effects such as cardiovascular disease. Herein, to meet the demand for effective and fast detection of H2O2 in food, a novel non-enzymatic electrochemiluminescence (ECL) sensor based on single-stranded DNA (ssDNA)/g-C3N4 nanosheets (NS) was established. The ssDNA/g-C3N4 NS hybrid was prepared by simple mixing g-C3N4 NS and ssDNA solution together. The prepared ssDNA/g-C3N4 NS exhibited improved peroxidase-like activity and was modified on a glassy carbon electrode to catalyze the ECL reaction of luminol-H2O2 to amplify the luminescence signal. Under the optimized conditions, the proposed sensor exhibits high sensitivity with a limit of detection (LOD) as low as 33 aM H2O2, which is much lower than the vast majority of reported methods. This method enables the reliable responding to H2O2 from the milk samples within 1 min.

Gold-Nanoparticle-Functionalized Cobalt-Nickel Phosphate 3D Nanoice Creams to Fabricate Stable and Sensitive Biosensors for the Cytochrome c Assay

Designing a stable and sensitive luminol-based electrochemiluminescence (ECL) analytical platform in the neutral condition has attracted a lot of attention. Here, gold-nanoparticle-functionalized cobalt-nickel phosphate three-dimensional nanoice creams (Au@Co₃Ni₃(PO₄)₄ NICs) are successfully prepared via electrostatic interaction. Generally, cobalt-nickel phosphate nanoice creams (Co₃Ni₃(PO₄)₄ NICs) are synthesized via a mild hydrothermal method and functionalized via polyethylenimine (PEI). Then, Au NPs are adsorbed on the surface of Co₃Ni₃(PO₄)₄ NICs via Au-N weak interaction to fabricate Au@Co₃Ni₃(PO₄)₄ NICs. Owing to the important roles of Au@Co₃Ni₃(PO₄)₄ in exhibiting excellent electrocatalytic activity, as well as preventing the deposition of negatively charged oxidation product induced electrode passivation, luminol in the nanohybrids (LH-Au@Co₃Ni₃(PO₄)₄) gives strong and stable ECL intensity in the neutral conditions. Moreover, the ECL emission of luminol is obviously quenched based on the resonance energy transfer (RET) between luminol as donor and cytochrome c (Cyt c) as acceptor. Hence, a sensitive ECL biosensor is successfully fabricated for the quantitative determination of Cyt c in cell lysates and exhibits wide linear ranges of 1.0 × 10^-4-0.5 × 10^-5 and 0.5 × 10^-5-1.0 × 10^-8 M as well as a low detection limit of 2.48 nM. This novel sensing strategy will broaden the application of transition metal (Co, Ni) phosphates in bioassays.

Highly efficient electrochemiluminescence of ruthenium complex-functionalized CdS quantum dots and their analytical application

The electrochemiluminescence (ECL) method has attracted increasing attention in analytical fields. However, ECL luminophores with high ECL efficiency both at positive and negative potentials still remain rare. Herein, we synthesized ruthenium complex-functionalized CdS quantum dots (QDs) with high ECL efficiency both at positive and negative potentials in aqueous solution. CdS QDs were chosen as the ECL donor while bis(2,2'-bipyridine)-(5-aminophenanthroline)ruthenium bis(hexafluorophosphate) (Ru-NH2) was employed as the ECL acceptor. Ru-NH2 was covalently coupled to the surface of CdS QDs via diazonium salt chemistry to form CdS-Ru nanoparticles. ECL resonance energy transfer (ECL-RET) occurred inside the CdS-Ru nanoparticles and strong ECL emissions were obtained from CdS-Ru nanoparticles at both positive potential in the presence of tri-n-propylamine and at negative potential in the presence of peroxydisulfate. Further, the combination of the excellent recognition ability of the aptamer and the good ECL behavior of CdS-Ru nanoparticles, as a proof-of-concept, showed that two sensitive ECL methods for the detection of thrombin were readily achieved under different ECL measurement conditions with a low detection limit of 0.6 pM and 0.7 pM. This work demonstrates that CdS-Ru nanoparticles with intramolecular ECL-RET are good ECL luminophores in the sensitive detection of targets, which is promising in multiple assays with spectrum-resolved and potential-resolved possibility for biological applications.

An aptasensor for the label-free detection of thrombin based on turn-on fluorescent DNA-templated Cu/Ag nanoclusters

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs). Two DNA templates were designed as the functional structures consisting of the Cu/Ag NC-nucleation segment located at two termini or one terminus and the aptamer segment in the middle of a DNA template. Two darkish DNA-Cu/Ag NCs came close to each other when the aptamer combined with the target due to the conformational alteration of the aptamer structure, resulting in an increased fluorescence signal readout. Thrombin was sensitively determined as low as 1.6 nM in the range of 1.6–8.0 nM with a high selectivity. Finally, this sensor succeeded in detecting thrombin in a real fetal bovine serum.

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs).

A dual-signal output ratiometric electrochemiluminescent sensor for NADH detection

Ratiometric electrochemiluminescence (ECL) has attracted great attention in the field of electrochemical analysis. In this study, a dual-signal-output ratiometric ECL sensor was developed for the detection of nicotinamide adenine dinucleotide (NADH). Nitrogen-doped graphene quantum dots (NGQDs) exhibit double ECL signal output capability, without the requirement of additional coreactants. NADH can amplify the anodic ECL response of NGQDs, while it can diminish the cathodic ECL response of NGQDs. Based on the principle between relative enhancing ECL intensity ratio and NADH concentrations, the constructed ratiometric ECL sensor was applied to NADH assays, with a wide concentration range of 10-400 μM and a low limit of detection (LOD) of 2.5 μM (S/N = 3). Furthermore, the proposed method was applied for the determination of spiked NADH, which was proved to be feasible in the biological sample matrix. The proposed strategy of modulating multiple-ECL signals of the single NGQD emitter not only provides a new ECL system for the accurate detection of NADH but also broadens the design pathway for ratiometric sensing fabrication.

Versatile Electrochemiluminescence and Photoelectrochemical Detection of Glutathione Using Mn2+ Substitute Target by DNA-Walker-Induced Allosteric Switch and Signal Amplification

Glutathione (GSH) serves vital functions in biological systems and associates with various human diseases. In this work, a versatile electrochemiluminence (ECL) and a photoelectrochemical (PEC) "signal on" biosensing platform were developed for a sensitive assay of GSH by a Mn²⁺-powered DNAzyme amplification strategy combined with DNA-walker-triggered allosteric conversion. First, MnO₂ nanosheets were reduced to Mn²⁺ by GSH; then, Mn²⁺ as a substitute target triggered DNAzyme-assisted cleavage-cycling amplification to generate numerous DNA output (s3). Meanwhile, the DNA molecular machine was introduced to bridge signal probes for versatile biosensing, which included hairpin DNA as a track and an arm as a walker. The presence of DNA output (s3) activated the swing arm to hybridize with hairpin DNA and then cut it by Nt.BbvCI, which initiated autonomous walking of the arm for forming a large number of streptavidin (SA) aptamers. Thus, a large number of CdS:Mn-SA tags as versatile signal probes was linked to the electrode by specific SA-aptamer binding, generating highly enhanced ECL and PEC signals for sensitive detection of the target. The present biosensing system take advantage of metal ion-based DNAzyme amplification, a DNA walker machine, multi-signals of QDs, and specificity of aptamers, which can provide a universal and efficient biosensing method for detecting various targets. The designed strategy demonstrated good performance for a GSH assay in human serum samples, showing more promising applications than other reported methods.

Design and Biosensing of a Ratiometric Electrochemiluminescence Resonance Energy Transfer Aptasensor between a g-C3N4 Nanosheet and Ru@MOF for Amyloid-β Protein

A dual-wavelength ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) aptasensor based on the carbon nitride nanosheet (g-C₃N₄ NS) and metal-organic frameworks (Ru@MOFs) as energy donor-receptor pairs is first designed for the detection of the amyloid-β (Aβ) protein. The cathode ECL of g-C₃N₄ NS gradually decreased, whereas the anode ECL from Ru@MOF pyramidally enhanced along with the increasing concentration of Aβ in a 0.1 M phosphate-buffered saline solution containing 0.1 M S₂O₈^2-. Additionally, it is worth noting that 2-amino terephthalic acid from MOF not only can load abundant amounts of luminophor Ru(bpy)₃²⁺ but also promote the conversion of more amounts of S₂O₈^2- that served as a coreactant accelerator into SO₄^•-, further enhancing the ECL signal of Ru@MOF. Besides, the ECL intensity from the g-C₃N₄ NS had a tremendous spectrum overlap with the UV-vis spectrum of Ru@MOF, demonstrating the high-efficiency ECL-RET from g-C₃N₄ NS to Ru@MOF. According to the ratio of ECL_460nm/ECL_620nm, the constructed aptasensor for the detection of Aβ showed a wide linear range from 10^-5 to 500 ng/mL and a low detection limit of 3.9 fg/mL (S/N = 3) with a correction coefficient of 0.9965. The obtained results certified that the dual-wavelength ratiometric ECL sensor could provide a reliable direction and have the potential for application in biosensing and clinical diagnosis fields.

Electrochemiluminescence-Microscopy for microRNA Imaging in Single Cancer Cell Combined with Chemotherapy-Photothermal Therapy

In this work, a new technology using ECL as a microscopy to parallel image miRNA-21 in single cancer cell was built. Phorbol-12-myristate-13-acetate (PMA) loaded gold nanocages (Au NCs) was closed with DNA gate which could be recognized and opened by miRNA-21 in HeLa cell. PMA was then released and further induced HeLa cells to produce reactive oxygen species (ROS; including O^2-•, •OH and H₂O₂ etc.). With H₂O₂ as coreactant and luminol as ECL active material, ECL imaging of intracellular miRNA-21 in single HeLa cell was obtained by EMCCD. Moreover, ROS therapy and photothermal therapy (PPT) of Au NCs@PMA probe were also motivated by in situ miRNA-21 marker instead of the external source. The combined therapy leads to dramatically enhanced ability for cancer cell killing. Au NCs@PMA probe alone could not only achieve a high sensitivity and high resolution ECL-microscopy for imaging of intracellular miRNA-21 for the first time, but also realize the integrated diagnosis like ROS induced tumor damage and photothermal-induced intelligent therapy. This multifunctional platform is believed to be capable of playing an important role in future oncotherapy by the synergistic effects between chemotherapy and photothermal therapy.

Dual resonance energy transfer in triple-component polymer dots to enhance electrochemiluminescence for highly sensitive bioanalysis

Polymer dots (Pdots) have become a type of attractive illuminant for electrochemiluminescence (ECL). However, the low ECL efficiency severely limits their practicability. Here, we design a dual intramolecular resonance energy transfer (RET) mechanism with newly synthesized triple-component Pdots to achieve great ECL enhancement. This mechanism efficiently shortens the path of energy transmission, thus greatly promoting the ECL amplification by 380 and 31 times compared to systems with no and single RET, and results in a relative ECL efficiency of 23.1% (vs. 1 mM Ru(bpy)32+). Using metal-organic frameworks to carry the triple-component Pdots, a highly luminescent probe is proposed. By integrating the probe with target-mediated enzymatic circulation amplification and DNA arrays, a highly sensitive ECL imaging method is designed for simultaneous visual analysis of two kinds of proteins, mucin 1 and human epidermal growth factor receptor 2, on living cells, which exhibited linear ranges of 1 pg mL-1 to 5 ng mL-1 and 5 pg mL-1 to 10 ng mL-1 with limits of detection of 1 pg mL-1 and 5 pg mL-1, respectively. The proposed strategy showed promising application in bioanalysis.

Nanoporous Semiconductor Electrode Captures the Quantum Dots: Toward Ultrasensitive Signal-On Liposomal Photoelectrochemical Immunoassay

Liposomal photoelectrochemical (PEC) bioanalysis has recently emerged and exhibited great potential in sensitive biomolecular detection. Exploration of the facile and efficient route for advanced liposomal PEC bioanalysis is highly appealing. In this work, we report the split-type liposomal PEC immunoassay system consisting of sandwich immunorecognition, CdS quantum dots (QDs)-loaded liposomes (QDLL), and the release and subsequent capture of the QDs by a separated TiO₂ nanotubes (NTs) electrode. The system elegantly operated upon the protein binding and lysis treatment of CdS QDLL labels within the 96-well plate, and then the CdS QDs-enabled sensitization of TiO₂ NTs electrode. Exemplified by cardiac markers troponin I (cTnI) as target, the proposed system achieved efficient activation of TiO₂ NTs electrode and thus the signal generation toward the split-type PEC immunoassay. This work features the first use of QDs for liposomal PEC bioanalysis and is expected to inspire more interests in the design and implementation of numerous QDs-involved liposomal PEC bioanalysis.

Emerging trends in sensors based on carbon nitride materials

A new class of functional materials, carbon nitrides, has recently attracted the attention of researchers.

Electrochemiluminescent aptasensor for thrombin using nitrogen-doped graphene quantum dots

An electrochemiluminescent (ECL) aptamer based method is described for the determination of thrombin. Three-dimensional nitrogen-doped graphene oxide (3D-NGO) was placed on a glassy carbon electrode (GCE) to provide an electrode surface that displays excellent electrical conductivity and acts as a strong emitter of ECL. The modified electrode was further coated with chitosan via electrodeposition. Finally, the amino-modified aptamer was immobilized on the modified GCE. The interaction between thrombin and aptamer results in a decrease in ECL. The assay has a linear response in the 1 fM to 1 nM thrombin concentration range and a 0.25 fM lower detection limit (at an S/N ratio of 3). The method was applied to the determination of thrombin in spiked human plasma samples, and recoveries ranged between 94 and 105% (with RSDs of <3.6%). The calibration plot was recorded at potential and wavelength of fluorescence emission (wavelength: 445 nm; potential: 0 to -2 V). Graphical abstract A bare glassy carbon electrode (GCE) does not display electrochemiluminescence (ECL). If, however, nitrogen-doped graphene quantum dots, chitosan, and three-dimensional nitrogen-doped graphene oxide (NGQD-chitosan/3D-NGO) are electrodeposited on the GCE, strong ECL can be observed. The ECL intensity decreased after aptamer and bovine serum albumin (BSA) were dropped onto the electrode (curve a). However, the ECL further decreases after addition of thrombin (TB; curve b).

Amplified electrochemiluminescence detection of CEA based on magnetic Fe3O4@Au nanoparticles-assembled Ru@SiO2 nanocomposites combined with multiple cycling amplification strategy

In this work, we designed a new strategy for ultrasensitive detection of CEA based on efficient electrochemiluminescence (ECL) quenching of Ru(bpy)₃²⁺-doped SiO₂ nanocomposite by ferrocene using target recycling amplification technique. A large number of Ru@SiO₂ ECL signal probe were firstly assembled on the novel magnetic core-shell Fe₃O₄@Au nanoparticles (NPs), then the ferrocene-labeled ECL quenching probe (Fc-probe) was linked to the magnetic NPs. Finally, numerous DNA1 sequences were produced by target CEA-triggered multiple recycling amplification and displaced the Fc-probe on the magnetic NPs, leading to significantly enhanced ECL signal for CEA detection. Because of the designed cascade signal amplification strategy, the newly developed method achieved a wide linear range of 10 fg/mL to 10 ng/mL with a low detection limit of  3.5 fg/mL. Furthermore, taking advantages of the magnetic Fe₃O₄@Au NPs for carring abundant signal probes, sensing target and ECL detection, the developed ECL strategy is convenient, rapid and displayed high sensitivity for CEA detection, which has great potential for analyzing the clinical samples in practical disease diagnosis applications.

A novel electrochemiluminescence resonance energy transfer system of luminol-graphene quantum dot composite and its application in H2O2 detection

Luminol-nitrogen doped graphene quantum dot (luminol-NGQDs) nanocomposite was synthesized and a novel electrochemiluminescence resonance energy transfer (ECL-RET) process occurred between luminol as the donor and NGQDs as the acceptor in the composite. This ECL-RET effect helped luminol-NGQDs composite produced an anodic ECL signal without coreactants. The ECL-RET mechanism was also studied based on the fluorescence spectra, the ultraviolet-visible absorption spectra and the electrochemiluminescence (ECL) spectra. Based on the significant sensitization effect of hydrogen peroxide on luminol-NGQDs ECL signal, an ECL method for the sensitive determination of hydrogen peroxide was established and then applied to the detection of hydrogen peroxide in water samples.

Determination of bromate via the chemiluminescence generated in the sulfite and carbon quantum dot system

The authors describe a chemiluminescence (CL)-based assay for the determination of bromate. The method is based on the use of a solution of carbon quantum dots (CQDs) and sulfite. Strong CL (peak at 490 nm) is observed when bromate is injected into the solution. The CL increases linearly in the 0.3 to 10 μmol L^-1 bromate concentration range, giving a 0.1 μmol L^-1 limit of detection (at an S/N ratio of 3). A possible CL mechanism is suggested that involves a redox reaction between the CQDs, bromate and sulfite in the acidic medium. This leads to the formation of hole-injected and electron-injected CQDs. Radiative recombination of oxidant-injected holes and electrons in the CQDs accounts for the occurrence of CL. This mechanism contradicts the previous assumption that the transfer of energy occurs from SO₂* to the CQDs. Although nitrite may interfere in the determination of bromate, its effect can be eliminated by adding sulfamic acid. The assay is sensitive and represents a new tool for the determination of bromate, which is a carcinogen. Graphical abstract Under acidic condition, carbon quantum dots (CQDs) can react with sulfite and bromate transforming to hole-injected CQDs (CQDs^•-) and electron-injected CQDs (CQDs^•+), respectively. Thereafter, strong chemiluminescence (490 nm) aroused from the radiative electron-hole annihilation between CQDs^•- and CQDs^•+.

Development of quantum dot-based biosensors: principles and applications

We review the recent advances in quantum dot-based biosensors and focus on quantum dot-based fluorescent, bioluminescent, chemiluminescent, and photoelectrochemical biosensors.

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.