Quantitative Detection of Uric Acid by Electrochemical-Surface Enhanced Raman Spectroscopy Using a Multilayered Au/Ag Substrate

Quantitative multiplexing of uric acid and creatinine using polydisperse plasmonic nanoparticles enabled by electrochemical-SERS and machine learning

Surface-enhanced Raman spectroscopy (SERS) is a promising technique for the detection of biomarkers, but it can struggle to quantify multiple analytes in complex fluids. This study combines electrochemical SERS (E-SERS) and machine learning for the quantitative multiplexed detection of uric acid (UA) and creatinine (CRN). Using classical polydisperse Ag nanoparticles (NPs) made by scalable synthesis, we achieved quantitative multiplexing with low limits of detection (LoDs) and high prediction accuracy, comparable to those made by sophisticated approaches. The E-SERS LoDs at the optimal applied potentials were 0.127 μM and 0.354 μM for UA and CRN respectively, compared to 0.504 μM and 1.02 μM for conventional SERS (recorded at 0 V). By collecting a multi-dimensional E-SERS dataset and applying a two-step partial least squares regression - multilayer perceptron (PLSR-MLP) machine learning algorithm, we were able to identify the analyte concentrations in unseen spectra with a prediction accuracy of 0.94. This research demonstrates the potential of E-SERS and machine learning for multiplexed detection in clinical settings.

SERS and electrochemical dual-mode detection of miRNA-141 by using single Au@Ag nanowire as a new platform

As biomarkers of cancer, the accurate and sensitive detection of microRNAs is of great significance. Therefore, we proposed a surface-enhanced Raman scattering (SERS)/electrochemical (EC) dual-mode nanosensor for sensitively detecting miRNA-141. The nanosensor uses Au@Ag nanowires as a novel SERS/EC sensing platform, which has the advantages of good biocompatibility, fast response, and high sensitivity. The dual-mode nanosensor can not only effectively overcome the problem of insufficient reliability of single signal, but also realize the amplification and stable output of the detection signal, to ensure the reliability and repeatability of miRNA detection. With this sensing strategy, the target miRNA-141 can be detected over a wide linear range (100 fM to 50 nM) (LOD of 18.4 fM for SERS and 16.0 fM for electrochemical methods). In addition, the process shows good selectivity and can distinguish miRNA-141 from other interfering miRNAs. The actual analysis of human serum samples also proves that our strategy has good reliability, repeatability, and has broad application prospects in the field of analysis and detection.

Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Development of a paper-based transcription aptasensor for convenient urinary uric acid self-testing

The abnormal uric acid (UA) level in urine can serve as warning signals of many diseases, such as gout and metabolic cardiovascular diseases. The current methods for detecting UA face limitations of instrument dependence and the requirement for non-invasiveness, making it challenging to fulfill the need for home-based application. In this study, we designed an aptasensor that combined UA-specific transcriptional regulation and a fluorescent RNA aptamer for convenient urinary UA testing. The concentration of UA can be translated into the intensity of fluorescent signals. The aptasensor showed higher sensitivity and more robust anti-interference performance. UA levels in the urine of different volunteers could be accurately tested using this method. In addition, a paper-based aptasensor for UA self-testing was manufactured, in which the urinary UA levels could be determined using a smartphone-based colorimetric approach. This work not only demonstrates a new approach for the design of disease-associated aptasensor, but also offers promising ideas for home-based detection of UA.

Zn-CD@Eu Ratiometric Fluorescent Probe for the Detection of Dipicolinic Acid, Uric Acid, and Ex Vivo Uric Acid Imaging

Development of reliable methods for the detection of potential biomarkers is of the utmost importance for an early diagnosis of critical diseases and disorders. In this study, a novel lanthanide-functionalized carbon dot-based fluorescent probe Zn-CD@Eu is reported for the ratiometric detection of dipicolinic acid (DPA) and uric acid (UA). The Zn-CD@Eu nanoprobe was obtained from a simple room-temperature reaction of zinc-doped carbon dots (Zn-CD) and the EDTA-Eu lanthanide complex. Under optimal conditions, a good linear response was obtained for DPA in two concentration ranges of 0-55 and 55-100 μM with a limit of detection of 0.53 and 2.2 μM respectively, which is significantly below the infectious dosage of anthrax (∼55 μM). Furthermore, the Zn-CD@Eu/DPA system was employed for the detection of UA with a detection limit of 0.36 μM in the linear range of 0-100 μM. The fluorescent probe was successfully implemented for determining DPA and UA in human blood serum, sweat, and natural water bodies with considerable recovery rates. In addition, the potential of the nanoprobe for ex vivo visualization of UA was demonstrated in fruit fly (Drosophila melanogaster) as a model organism.

A facile, low-cost bimetallic iron-nickel MOF nanozyme-propelled ratiometric fluorescent sensor for highly sensitive and selective uric acid detection and its smartphone application

As a kind of well-known disease biomarker, uric acid (UA) is closely associated with normal metabolism and health. Despite versatile nanozymes facilitating the analysis of UA, most previous works could only generate single-signal outputs with unsatisfactory detection performance. Exploring a novel ratiometric fluorescent UA sensor with high sensitivity, reliability and portable sensing ability based on facile, low-cost nanozymes is still challenging. Herein, we report the first metal-organic-framework (MOF) nanozyme-originated ratiometric fluorescent UA sensor based on Fe3Ni-MOF-NH2 propelled UA/uricase/o-phenylenediamine tandem catalytic reaction. Different from previous reports, the peroxidase-like property and fluorescence of Fe3Ni-MOF-NH2 were simultaneously employed. In the absence of UA, only the MOF's fluorescence at 430 nm (FI430) can be observed, while the addition of UA will initiate UA/uricase catalytic reaction, and the generated H2O2 could oxidize o-phenylenediamine into highly fluorescent 2,3-diaminophenazine (DAP) (emission at 565 nm, FI565) under the catalysis of the MOF nanozyme. Coincidently, MOF's fluorescence can be quenched by DAP via the inner filter effect, resulting in a low FI430 value and high FI565 value, respectively. Therefore, H2O2 and UA can be alternatively detected through monitoring the above contrary fluorescence changes. The limit of detection for UA is 24 nM, which is much lower than those in most previous works, and the lowest among nanozyme-based ratiometric fluorescent UA sensors reported to date. Moreover, the portable sensing of UA via smartphone-based RGB analysis was facilely achieved by virtue of the above nanozyme-propelled tandem catalytic system, and MOF nanozyme-based molecular contrary logic pairs were further implemented accordingly.

Solid-State Au Nanocone Arrays Substrate for Reliable SERS Profiling of Serum for Disease Diagnosis

Surface-enhanced Raman scattering (SERS) is a widely used rapid and noninvasive method for detecting biological substances in serum samples and is commonly employed in disease screening and diagnosis. Solid-state nanoarray SERS substrates used in serum detection may cause spectral instability due to imperfections in the detection method. For the purpose of identifying optimal detection conditions, various dilution levels of the serum were tested in this study. The study found that a complete and stable serum SERS spectrum can be obtained when the serum is diluted by a factor of 50. The study reports the successful preparation of an Au nanocone array (Au NCA) plasmonic substrate with a uniform, controllable microstructure and high activity, achieved through a combination of PS colloidal sphere template-assisted reactive ion etching (RIE) process and magnetron sputtering deposition technology. Based on this substrate, a standard detection scheme was developed to obtain highly stable and repeatable serum SERS spectra. The study verified the reliability of the optimized serum detection scheme by comparing the SERS spectra of serum samples from healthy individuals and gastric cancer patients, and confirmed the potential benefits of the scheme for disease screening and diagnosis.

Enzyme-free and wide-range portable colorimetric sensing system for uric acid and hydrogen peroxide based on copper nanoparticles

Uric acid (UA) is the final product of purine metabolism. A high concentration of UA in body fluid may lead to kidney stones, gout, and some cardiovascular diseases. Therefore, the non-invasive daily monitoring of UA is of great significance for both hyperuricemia patients and fit people. However, most of the current detection methods for UA are enzyme-dependent which limits the application scenarios and lacks portable instruments for on-site detection, including optics and electrochemistry. In this work, an enzyme-free and wide-range colorimetric sensor for UA and H₂O₂ detection was developed based on a mercaptosuccinic acid (MSA)-modified Cu nanoparticles (CuNPs). Under the action of UA or H₂O₂, with the cleavage of MSAs on the CuNPs surface, small Cu particles are further aggregated into larger particles with a lightning violet color. With the employment of the multi-channel handheld automatic photometer (MHAP), the concentration of UA and H₂O₂ can be determined on-site according to the absorbance measurement by the photodiodes. The linear range of UA was 5 μM-4.5 mM with the limit of detection (LOD) of 3.7 μM, while the linear range of H₂O₂ was 5 mM-500 mM and 5 μM-5 mM with the LOD of 4.3 μM. This approach has been applied to the detection of UA in human urine, providing more possibilities for non-invasive home health monitoring, community medical diagnosis, and broader prospects of on-site disease detection.

AuNP/Cu-TCPP(Fe) metal-organic framework nanofilm: a paper-based electrochemical sensor for non-invasive detection of lactate in sweat

Effective and real-time detection of lactate (LA) content in human sweat has attracted considerable attention from researchers. In this work, a novel electrochemical paper-based analysis device (ePAD) was developed for the non-invasive detection of LA in sweat. The electrocatalytic properties of AuNP/Cu-TCPP(Fe) hybrid nanosheets, which were prepared by an optimised synthetic method, were studied by CV and EIS electrochemical methods for the first time and the working electrode can be fabricated using a drip coating method. The lactate sensor was optimised and validated for usability, adoptability and interpretability. To the best of our knowledge, this was the fastest, lowest detection line and widest linear range method reported to date for the detection of lactate. It achieved the detection limit of 0.91 pM and a linear range from 0.013 nM to 100 mM. The dual catalytic effects of the hybrid NSs shortened the detection time by nearly two times and enhanced the sensitivity approximately two times, an accuracy unmatched until now. Furthermore, this sensor was employed for LA analysis and validated by high performance liquid chromatography (HPLC). The ePAD shows superior biocompatibility, accuracy, and high sensitivity and can be easily manufactured. Hence, it is applicable for the long-term monitoring of sweat LA concentrations in point-of-care testing, athletic testing of athletes and military personnel and other subjects in different extreme environments.

In situ synthesis of polythiophene encapsulated 2D hexagonal boron nitride nanocomposite based electrochemical transducer for detection of 5-fluorouracil with high selectivity

It is difficult for the scientific community to develop a nonenzymatic sensing platform for extremely sensitive and selective detection of specific biomolecules, antibiotics, food adulterants, heavy metals, etc. One of the most significant chemotherapy drugs, 5-fluorouracil (5-Fu), which is used to treat solid malignancies, has a fluorine atom in the fifth position of the uracil molecule. Recognizing the secure and effective dosing of drugs for chemotherapy continues to be a critical concern in cancer disease management. The maintenance of the optimal 5-Fu concentration is dependent on the presence of 5-Fu in biofluids. Herein we reported a conducting polymer encapsulated 2D material, PTh/h-BN for the efficient electrochemical detection of anticancer drug 5-Fu. Furthermore, the synthesized PTh/h-BN nanocomposite was confirmed by the High-Resolution Transmission Electron Microscope (HR-TEM), High-Resolution Scanning Electron Microscope (HR-SEM), X-ray diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FT-IR). The electrical resistance of PTh/h-BN modified GCE and its sensing performance towards 5-Fu were tested using Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV) studies respectively. The analytical performance of our proposed catalyst was tested using Differential Pulse Voltammetry (DPV), and the amperometry (i-t curve) method. From the results, our proposed PTh/h-BN nanocomposite-modified GCE shows enhanced sensing performance due to higher redox peak currents, large active surface area, and high electrical conductivity. Moreover, the nanohybrid shows enhanced sensing performances with quick response time, wide linear range, the lowest limit of detection, high sensitivity, and high selectivity in the presence of various interferents. Finally, the practical applicability of the proposed sensor was tested with real-world samples with very good recovery percentages.

Terahertz Enhanced Sensing of Uric Acid Based on Metallic Slot Array Metamaterial

An enzyme-free terahertz uric acid sensor based on a metallic slot array metamaterial was proposed and realized both theoretically and experimentally. The sensing model was verified in simulation and femtosecond laser processing technology was employed to ablate slots in the copper plate to fabricate metamaterials. Analytes were tested with liquid phase deposition on the metamaterial by a terahertz frequency domain spectroscopy system. Gradient concentrations of uric acid, ascorbic acid, and a mixture of them were measured separately with a good linear response. A significant decrease in sensitivity was observed in the ascorbic acid assay compared with the uric acid assay. The test results of the mixture also proved that our device is resistant to ascorbic acid. It is a simple and effective method for monitoring uric acid concentrations and the strategy of eliminating interference while modulating the resonance peak location mentioned here can be rationally projected for the development of other sensors.

Emerging nanosensor platforms and machine learning strategies toward rapid, point-of-need small-molecule metabolite detection and monitoring

Speedy, point-of-need detection and monitoring of small-molecule metabolites are vital across diverse applications ranging from biomedicine to agri-food and environmental surveillance. Nanomaterial-based sensor (nanosensor) platforms are rapidly emerging as excellent candidates for versatile and ultrasensitive detection owing to their highly configurable optical, electrical and electrochemical properties, fast readout, as well as portability and ease of use. To translate nanosensor technologies for real-world applications, key challenges to overcome include ultralow analyte concentration down to ppb or nM levels, complex sample matrices with numerous interfering species, difficulty in differentiating isomers and structural analogues, as well as complex, multidimensional datasets of high sample variability. In this Perspective, we focus on contemporary and emerging strategies to address the aforementioned challenges and enhance nanosensor detection performance in terms of sensitivity, selectivity and multiplexing capability. We outline 3 main concepts: (1) customization of designer nanosensor platform configurations via chemical- and physical-based modification strategies, (2) development of hybrid techniques including multimodal and hyphenated techniques, and (3) synergistic use of machine learning such as clustering, classification and regression algorithms for data exploration and predictions. These concepts can be further integrated as multifaceted strategies to further boost nanosensor performances. Finally, we present a critical outlook that explores future opportunities toward the design of next-generation nanosensor platforms for rapid, point-of-need detection of various small-molecule metabolites.

Surface potential modulation as a tool for mitigating challenges in SERS-based microneedle sensors

Raman spectroscopic-based biosensing strategies are often complicated by low signal and the presence of multiple chemical species. While surface-enhanced Raman spectroscopy (SERS) nanostructured platforms are able to deliver high quality signals by focusing the electromagnetic field into a tight plasmonic hot-spot, it is not a generally applicable strategy as it often depends on the specific adsorption of the analyte of interest onto the SERS platform. This paper describes a strategy to address this challenge by using surface potential as a physical binding agent in the context of microneedle sensors. We show that the potential-dependent adsorption of different chemical species allows scrutinization of the contributions of different chemical species to the final spectrum, and that the ability to cyclically adsorb and desorb molecules from the surface enables efficient application of multivariate analysis methods. We demonstrate how the strategy can be used to mitigate potentially confounding phenomena, such as surface reactions, competitive adsorption and the presence of molecules with similar structures. In addition, this decomposition helps evaluate criteria to maximize the signal of one molecule with respect to others, offering new opportunities to enhance the measurement of analytes in the presence of interferants.

Methotrexate Detection in Serum at Clinically Relevant Levels with Electrochemically Assisted SERS on a Benchtop, Custom Built Raman Spectrometer

Therapeutic drug monitoring (TDM) is an essential clinical practice for optimizing drug dosing, thereby preventing adverse effects of drugs with a narrow therapeutic window, slow clearance, or high interperson pharmacokinetic variability. Monitoring methotrexate (MTX) during high-dose MTX (HD-MTX) therapy is necessary to avoid potentially fatal side effects caused by delayed elimination. Despite the efficacy of HD-MTX treatment, its clinical application in resource-limited settings is constrained due to the relatively high cost and time of analysis with conventional analysis methods. In this work, we developed (i) an electrochemically assisted surface-enhanced Raman spectroscopy (SERS) method for detecting MTX in human serum at a clinically relevant concentration range and (ii) a benchtop, Raman detection system with an integrated potentiostat, software, and data analysis unit that enables mapping of small areas of SERS substrates and quantitative SERS-based analysis. In the assay, by promoting electrostatic attraction between gold-coated nanopillar SERS substrates and MTX molecules in aqueous samples, a detection limit of 0.13 μM with a linear range of 0.43-2 μM was achieved in PBS. The implemented sample cleanup through gel filtration proved to be highly effective, resulting in a similar detection limit (0.55 μM) and linear range (1.81-5 μM) for both PBS and serum. The developed and optimized assay could also be used on the in-house built, Raman device. We showed that MTX detection can be carried out in less than 30 min with the Raman device, paving the way toward the TDM of MTX at the point-of-need and in resource-limited environments.

Review on combining surface-enhanced Raman spectroscopy and electrochemistry for analytical applications

The discovery of surface enhanced Raman scattering (SERS) from an electrochemical (EC)-SERS experiment is known as a historic breakthrough. Five decades have passed and Raman spectroelectrochemistry (SEC) has developed into a common characterization tool that provides information about the electrode-electrolyte interface. Recently, this technique has been successfully explored for analytical purposes. EC was found to highly improve the performances of SERS sensors, providing, among others, controlled adsorption of analytes and increased reproducibility. In this review, we highlight the potential of EC-SERS sensors to be implemented for point-of-need (PON) analyses as miniaturized devices, and their ability to revolutionize fields like quality control, diagnosis or environmental and food safety. Important developments have been achieved in Raman spectroelectrochemistry, which now represents a promising alternative to conventional analytical methods and interests more and more researchers. The studies included in this review open endless possibilities for real-life EC-SERS analytical applications.

Organic Anion Detection with Functionalized SERS Substrates via Coupled Electrokinetic Preconcentration, Analyte Capture, and Charge Transfer

Detecting ultralow concentrations of anionic analytes in solution by surface-enhanced Raman spectroscopy (SERS) remains challenging due to their low affinity for SERS substrates. Two strategies were examined to enable in situ, liquid phase detection using 5(6)-carboxyfluorescein (5(6)-FAM) as a model analyte: functionalization of a gold nanopillar substrate with cationic cysteamine self-assembled monolayer (CA-SAM) and electrokinetic preconcentration (EP-SERS) with potentials ranging from 0 to +500 mV. The CA-SAM did not enable detection without an applied field, likely due to insufficient accumulation of 5(6)-FAM on the substrate surface limited by passive diffusion. 5(6)-FAM could only be reliably detected with an applied electric field with the charged molecules driven by electroconvection to the substrate surface and the SERS intensity following the Langmuir adsorption model. The obtained limits of detection (LODs) with an applied field were 97.5 and 6.4 nM on bare and CA-SAM substrates, respectively. For the CA-SAM substrates, both the ligand and analyte displayed an ∼15-fold signal enhancement with an applied field, revealing an additional enhancement due to charge-transfer resonance taking place between the metal and 5(6)-FAM that improved the LOD by an order of magnitude.

Floating Ag-NPs@Cu-NW bundles fabricated on copper mesh for highly sensitive SERS detection of uric acid in pretreatment-free urine

Bundle-like structures decorated with Ag nanoparticles can be used as active floating SERS substrates with abundant 3D hot spots for highly sensitive detection of uric acid based on capillary forces that drive target molecules into the hot spots.

Rapid Determination of the 'Legal Highs' 4-MMC and 4-MEC by Spectroelectrochemistry: Simultaneous Cyclic Voltammetry and In Situ Surface-Enhanced Raman Spectroscopy

The synthetic cathinones mephedrone (4-MMC) and 4-methylethcathinone (4-MEC) are two designer drugs that represent the rise and fall effect of this drug category within the stimulants market and are still available in several countries around the world. As a result, the qualitative and quantitative determination of 'legal highs', and their mixtures, are of great interest. This work explores for the first time the spectroelectrochemical response of these substances by coupling cyclic voltammetry (CV) with Raman spectroscopy in a portable instrument. It was found that the stimulants exhibit a voltammetric response on a gold screen-printed electrode while the surface is simultaneously electro-activated to achieve a periodic surface-enhanced Raman spectroscopy (SERS) substrate with high reproducibility. The proposed method enables a rapid and reliable determination in which both substances can be selectively analyzed through the oxidation waves of the molecules and the characteristic bands of the electrochemical SERS (EC-SERS) spectra. The feasibility and applicability of the method were assessed in simulated seized drug samples and spiked synthetic urine. This time-resolved spectroelectrochemical technique provides a cost-effective and user-friendly tool for onsite screening of synthetic stimulants in matrices with low concentration analytes for forensic applications.

Vibrational Spectroscopy: A Valuable Screening and Diagnostic Tool for Obstetric Disorders?

Preeclampsia (PE) is a common obstetric disorder typically affecting 2–8% of all pregnancies and can lead to several adverse obstetric outcomes for both mother and fetus with the greatest burden of severe outcomes in low middle-income countries (LMICs), therefore, screening for PE is vital. Globally, screening is based on maternal characteristics and medical history which are nonspecific for the disorder. In 2004, the World Health Organization acknowledged that no clinically useful test was able to predict the onset of PE, which prompted a universal search for alternative means of screening. Over the past decade or so, emphasis has been placed on the use of maternal characteristics in conjunction with biomarkers of disease combined into predictive algorithms, however these are yet to transition into the clinic and are cost prohibitive in LMICs. As a result, the screening paradigm for PE remains unchanged. It is evident that novel approaches are needed. Vibrational spectroscopy, specifically Raman spectroscopy and Fourier-transform infrared spectroscopy (FTIR), could provide better alternatives suited for implementation in low resource settings as no specialized reagents are required for conventional approaches and there is a drive to portable platforms usable in both urban and rual community settings. These techniques are based on light scattering and absorption, respectively, allowing detailed molecular analysis of samples to produce a unique molecular fingerprint of diseased states. The specificity of vibrational spectroscopy might well make it suited for application in other obstetric disorders such as gestational diabetes mellitus and obstetric cholestasis. In this review, we summarize current approaches sought as alternatives to current screening methodologies and introduce how vibrational spectroscopy could offer superior screening and diagnostic paradigms in obstetric care. Additionally, we propose a real benefit of such tools in LMICs where limited resources battle the higher prevalence of obstetric disorders.

Plasmonic Paper based Flexible SERS Biosensor for Highly Sensitive Detection of Lactic and Uric Acid

Selective detection and quantification of biomarkers related to human diseases are essential for preventive healthcare. Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful analytical tool offering high sensitivity. However, the success of this promising analytical tool relies on the ability to effectively fabricate SERS substrate. Herein we have demonstrated a plasmonic paper-based flexible substrate (PPFS) for SERS sensing. In situ growth of silver nanostructures (AgNS) on the paper-based substrate was achieved by using a simple one-step silver mirror reaction (SMR). FESEM and TEM results depicts that the increasing silver ion content influences the morphology (growth of multifacets), as well as size of AgNS. Further, the PPFS substrate was tested with Rhodamine-6G (Rh-6G) dye and an attomole sensitivity with a LOD of 4.54 x 10-18 M was achieved. Further, two biomarkers, lactic acid (LA) and uric acid (UA) were detected on the PPFS substrate, with μM and pM sensitivity, having LOD values of 0.6 x 10-6 and 0.3 x 10-12 M respectively. Above detection levels for UA on PPFS is two orders better than reported values, whereas for LA it is comparable with reported substrates. Finally, UA, LA and their mixtures were tested on PPFS and results compared with commercial substrate. The performance of PPFS were found better in all cases, thus, multifaceted AgNS paper based PPFS offers the potential to be used as a biosensor for detection of various biomarkers from body fluids, responsible for the detection of the critical disease for preventive health care.

Wireless Battery-Free Generation of Electric Fields on One-Dimensional Asymmetric Au/ZnO Nanorods for Enhanced Raman Sensing

Wearable electronics have great potential in enhancing health monitoring, disease diagnosis, and environmental pollution tracking. Development of wearable surface-enhanced Raman spectroscopy (SERS) substrates with target sampling and sensitive sensing functions is a promising way to obtain physical and chemical information. This study describes a facile and effective approach for constructing an electrically modulated SERS (E-SERS) substrate as a wearable and wireless battery-free substrate with improved sensitivity. By integrating zinc oxide nanorods (ZnO NRs) with asymmetric gold decoration, controllable enhanced piezoelectric potentials were achieved using magnets to supply the adjustable pressure force. Owing to spatially oriented electron-hole pair separation on the asymmetric NRs, the local hotspot intensity at the Au tips is significantly improved, increasing the SERS signal by 6.7 times. This mechanism was quantitatively analyzed using Raman spectra by in situ formation of Prussian blue (PB). As a proof-of-concept, the E-SERS substrate was further used as a wearable flexible device to directly collect the sweat on a runner's skin and then monitor the lactate status of the runner. This study offers new insight into the development of E-SERS substrates and provides new design options for the construction of wearable sampling and sensing devices for the noninvasive monitoring of metabolites in healthcare and biomedical fields.

Establishment of a reliable scheme for obtaining highly stable SERS signal of biological serum

As a rapid and non-destructive biological serum detection method, SERS technology was widely used in the screening and medical diagnosis of various diseases by combining the analysis of serum SERS spectrum and multivariate statistical algorithm. Because of the high complexity of serum components and the variability of SERS spectra, which often resulted in the phenomenon that the SERS spectrum of the same biological serum was significantly different due to the different test conditions. In this experiment, through the dilution treatment of the serum and the systematic test of the serum of all concentration gradients with lasers of wavelength of 785, 633 and 532 nm, the most suitable conditions for detecting the serum were investigated. The experimental results showed that only when the serum is diluted to low concentration (10 ppm), the SERS spectrum with high reproducibility and stability could be obtained, furthermore, the low concentration serum had weak tolerance to laser, and 532 nm laser was not suitable for serum detection. In this paper, a set of test scheme for obtaining highly stable serum SERS spectra was established by using high-performance gold nanoparticles (Au NPs) as the active substrate of SERS. Through comparative analysis of SERS spectrum of serum of normal people and cervical cancer, the reliability of the established low-concentration serum test program was verified, as well as its great potential advantages in disease screening and diagnosis.

Optimization of gold nanorod arrays for surface enhanced Raman spectroscopy (SERS) detection of atrazine

Recently, there has been increasing concern over the widespread use of the herbicide atrazine which has been reported to have problematic side effects on local ecosystems. This has highlighted the need for rapid and accurate point-of-need assessment tools for analytical determination of herbicides in ground and surface waters. Surface enhanced Raman spectroscopy (SERS) is a sensitive vibrational spectroscopy technique which has recently been employed for the analysis of a variety of analytes in water, ranging from pharmaceuticals to pesticides. In this work, SERS sensors constructed using gold nanorod (AuNR) arrays are optimized and then utilized for the rapid and sensitive detection of atrazine. In this study, the effect of relative humidity on the self-assembly of gold nanorods into arrays was explored, and the SERS performance was assessed using para-aminothiophenol as a SERS probe. Once the SERS performance of the substrates was deemed optimal, the detection of atrazine was highlighted. This work represents the first time that relative humidity has been explored as an optimization strategy for controlled alignment of gold nanorods for SERS analysis of atrazine.

Detection of caffeine intake by means of EC-SERS spectroscopy of human saliva

This work presents the application of EC-SERS spectroscopy for the detection of caffeine consumption from human saliva. Caffeine and paraxanthine as the major metabolite of caffeine were tested. Model samples of saliva spiked with caffeine were investigated, and detection of caffeine in real-life saliva samples was tested in order to ensure the viability of the method for clinical applications. Two doses of caffeine (2 mg/kg and 3.5 mg/kg) were ingested by volunteers, and their saliva samples were taken at different time periods ranging from 1 h to 10 h after the consumption. Density functional theory calculations of caffeine and paraxanthine adsorbed on the silver surface were performed in order to better understand the adsorption of the investigated molecules and to make a correct assignment of the experimental spectral bands of the EC-SERS spectra. It was determined that a low dose caffeine consumption can be detected by the appearance of the SERS spectral marker band of caffeine and paraxanthine at 692 cm^-1. The intensity of this band is mostly reasoned by the paraxanthine concentration since the intensity changes of the band over time correlates to the concentration changes of paraxanthine determined by the pharmacokinetic studies of paraxanthine and caffeine in the human saliva. It was found that the limit of detection paraxanthine in saliva by means of EC-SERS is as low as 15 μM and can be further improved.

Photoacoustic-Based Miniature Device with Smartphone Readout for Point-of-Care Testing of Uric Acid

Real-time and rapid detection of various biomarkers in body fluids has important significance for early disease diagnosis, efficient monitoring of treatment, and evaluation of prognosis. However, traditional detection methods not only require bulky and costly instruments but also are not suitable for the analysis of heterogeneous samples (e.g., serum and urine), limiting their applications in point-of-care testing (POCT). Herein, an integrated photoacoustic (PA) device with a smartphone as the acoustic signal readout has been constructed, greatly reducing the volume and cost of the instrument, and providing a potential miniature platform for POCT of clinical samples. By exploiting the electron transfer product of 3,3',5,5'-tetramethylbenzidine (TMB) (i.e., TMB⁺⁺) as the PA probe and hemin-graphene oxide (H-GO) complex as the peroxidase, quantitative analysis of uric acid was successfully performed by using only 30 μL of a sample solution. Due to the favorable stability of artificial enzymes, reaction reagents could be effectively embedded in agar gel to make a portable "test strip". Therefore, operators just need to drop clinical samples on the "test strip" for PA analysis, which is user friendly without requiring complex sample preparation steps. In addition, since the acoustic change mainly comes from the PA effect, it has a lower background signal than UV-vis and fluorescence analysis, greatly improving the analytical performance. The simplicity, low cost, and broad adaptability make this miniature PA device attractive for on-site detection, particularly in resource-limited settings.

Integrated EC-SERS Chip with Uniform Nanostructured EC-SERS Active Working Electrode for Rapid Detection of Uric Acid

Toxemia of pregnancy is a very dangerous disease for pregnant women. The mortality rate of toxemia of pregnancy is close to 10% to 15%. Early detection of pregnancy toxemia is to monitoring uric acid concentration in urine. The current mainstream method for detecting uric acid requires an enzyme (urate oxidase), which needs to be stored in a low-temperature environment, and the method requires complex chemical steps, which takes a longer time and more samples. In this study, we propose an integrated miniature three-electrode electrochemical surface-enhanced Raman spectroscopy chip (EC-SERS chip) suitable for rapid EC-SERS detection applications. The integrated microfluidic reservoir on the chip makes it easy to use, which is very suitable for rapid detection applications. The SERS active working electrode for the proposed integrated EC-SERS chip is a nanocone array polycarbonate (PC) substrate decorated with an evenly distributed and tightly packed array of gold nanospheres. It showed good uniformity and can be easily reproduced. The integrated EC-SERS chip is very small compared to the traditional electrochemical cell, which reduces the sample volume required for the testing. In addition, the chip is for one-time use only. It eliminates the need to clean electrochemical cells for reuse, thereby reducing the possibility of contamination and inaccurate detection. Various low-concentration Rhodamine 6G (R6G) solutions were tested to verify the performance of the developed EC-SERS chip. Experimental results showed that the proposed EC-SERS chip has a strong enhancement factor of up to 8.5 × 10⁶ and a very good EC-SERS uniformity (the relative standard deviation of EC-SERS intensity is as low as 1.41%). The EC-SERS chip developed has been further tested for the detection of uric acid in synthetic urine. The results showed that the EC-SERS signal intensity has a highly linear relationship with the logarithm of the uric acid concentration in synthetic urine, which indicates that the developed EC-SERS chip is suitable for the quantitative detection of uric acid in synthetic urine. Therefore, the developed EC-SERS chip is very promising to be used in routine and early diagnosis of pregnancy toxemia and may be used in many other medical tests, food safety, and biotechnology applications.

Surface-Confined Building of Au@Pt-Centered and Multi-G-Quadruplex/Hemin Wire-Surrounded Electroactive Super-nanostructures for Ultrasensitive Monitoring of Morphine

Overuse and abuse of morphine (MOP), one of the main components of pericarpium papaveris, have attracted increasing attention in the medical field owing to its pharmacological and toxicological activity. Herein, we proposed a new electrochemical nano-biosensor for MOP detection based on surface-confined building of Au@Pt-centered and multi-G-quadruplex/hemin wire-surrounded electroactive super-nanostructures. The center Au@Pt was flower-shaped and irregularly protruded, allowing substantial loading of multiple G-quadruplex wire/hemin complexes on its surface to accomplish the assembly of electroactive super-nanostructures. Interestingly, as the super-nanostructures were closely confined on the electrode surface, a significantly amplified electrochemical signal was thus obtained in the absence of MOP. In contrast, the introduction of target MOP can induce an intense competitive effect and strongly destroy the assembly process, resulting in the reduction of the electrochemical response that is correlated with the logarithmic concentration of MOP. Under optimal conditions, the electrochemical nano-biosensor is capable of highly sensitive detection of MOP in a dynamic concentration range from 1 ppt to 500 ppb. The limit of detection is achieved as low as 0.69 ppt, and the practical application was confirmed by examining MOP from chafing dish condiments. We expect the electrochemical platform utilizing this unique nanoarchitecture to provide rational guidelines to design high-performance analytical tools.

Enzyme-coupled fluorescence sensor for sensitive determination of uric acid and uricase inhibitor

In this study, an enzyme-coupled fluorescence sensor was developed successfully for the sensitive detection of uric acid (UA) and uricase inhibitor based on graphene quantum dots (GQDs). UA was first oxidized using uricase and produced hydrogen peroxide (H₂ O₂ ), which could oxidize phenol to benzoquinone in the presence of horseradish peroxidase (HRP) as the catalysis. Benzoquinone is an efficient quencher and can cause fluorescence quenching of GQDs. The degree of quenching was proportional to UA concentration and was linear for the UA concentration in the ranges 0.2-14 μmol/L. The detection limit was 0.06 μmol/L for UA. In addition, the proposed sensor was further utilized for UA detection in human serum samples with satisfactory reproducibility and accuracy. The proposed strategy provided may be widely utilized to sense H₂ O₂ or H₂ O₂ generating processes in related biological environment.

Preparation and characterization of Ag-nanostars@Au-nanowires hierarchical nanostructures for highly sensitive surface enhanced Raman spectroscopy

In this work we study the surface enhanced Raman scattering (SERS) produced by hierarchical nanostructures obtained by coupling different anisotropic nanomaterial of two SERS active metals, namely Ag nanostars (AgNSs) and Au nanowires (AuNWs). Ag nanostars (AgNSs) are prepared, by a two-step one-pot synthesis by reduction of AgNO3 with hydroxylamine, trisodium citrate and NaOH. AuNWs are obtained by electroless templated synthesis in track-etched polycarbonate membranes with following etching of the template. The two precursors are bound together by bridging with the bifunctional cysteamine molecule, obtaining AgNS@AuNW hierarchical structures. Benzenethiol (BT) is adsorbed on the nanostructured material and used as SERS probe to study the amplification of Raman signals. Experimental results indicate significantly larger Raman enhancement when BT is adsorbed onto the AgNS@AuNW in comparison to AuNWs alone or decorated with quasi-spherical silver nanoparticles obtaining AgNP@AuNW. Digital simulations performed by the boundary element method agree with the experimental findings, showing higher number of hot spots and significantly higher SERS enhancements for AgNS@AuNW versus AuNWs or AgNSs or AgNP@AuNW.

Silicotungstic acid as a highly efficient coreactant for luminol chemiluminescence for sensitive detection of uric acid

Herein, we report luminol-silicotungstic acid (STA) chemiluminescence (CL) for the first time. The luminol-STA system resulted in remarkable CL enhancement (65 times) compared with the known classical luminol-H₂O₂ system because of the generation of the strong oxidizing agent tungsten trioxide from STA. Based on the quenching effect of uric acid, the new CL system is applied for the sensitive and selective assay of uric acid in its pure state (LOD 0.75 nM) and in real human urine with excellent recoveries in the range of 99.6-102.3%. Furthermore, this system permits the efficient detection of STA (LOD, 0.24 μM).

Spectroelectrochemical and computational studies of tetrahydrocannabinol (THC) and carboxy-tetrahydrocannabinol (THC-COOH)

Electrochemical SERS allows for the rapid detection of both THC and THC-COOH in bodily fluid matrices without interferences from matrix species, paving the way to a point-of-need tool for cannabinoid detection.

Purine-blended nanofiber woven flexible nanomats for SERS-based analyte detection

We report a fabricated nanocomposite as a flexible Surface-Enhanced Raman Scattering (SERS) substrate for uric acid detection up to 10⁻⁷ M (100 nM).

Spectroelectrochemistry, the future of visualizing electrode processes by hyphenating electrochemistry with spectroscopic techniques

Reviewing the future of electrochemistry combined with infrared, Raman, and nuclear magnetic resonance spectroscopy as well as mass spectrometry.

A ratiometric fluorescent probe for detection of uric acid based on the gold nanoclusters-quantum dots nanohybrid

Herein, we developed a simple strategy for the preparation of dual-emission fluorescent nanohybrid constructed of gold nanoclusters (Au NCs) and quantum dots (QDs). The bovine serum albumin-capped Au NCs can be directly used as the stabilizers to prepare CdS QDs. The synthesized bovine serum albumin-capped Au NCs and CdS QDs nanohybrid (BSA-Au NCs/QDs) displayed dual emission bands respectively at 490 nm and 685 nm. An obvious fluorescence quenching around 685 nm was detected with the addition of hydrogen peroxide (H₂O₂) in the presence of Fe²⁺ ions, and the fluorescence emission peak at 490 nm was not affected. Uricase can break down uric acid to produce H₂O₂, and we further used the BSA-Au NCs/QDs as a ratiometric fluorescent probe for determination of uric acid with the linear range from 0.67 to 60 μmol·L^-1 and the detection limit of 0.21 μmol·L^-1.

Determination of uric acid in synthetic urine by using electrochemical surface oxidation enhanced Raman scattering

In this work, a new and easy methodology to determine uric acid in relevant samples using Raman spectroelectrochemistry is presented. The spectroelectrochemistry experiment is based on the in-situ formation of a suitable substrate that enables the enhancement of the Raman signal of an analyte during the oxidation stage of a silver electrode. This phenomenon is known as electrochemical surface oxidation enhanced Raman scattering (EC-SOERS) and has proved to be useful in quantitative analysis using disposable screen printed electrodes. The successful combination of EC-SOERS with PARAFAC analysis allows the determination of uric acid in a relevant complex sample avoiding the use of standard addition method and without using a baseline correction, which simplifies the application of such methodology in routine analysis.