Inductively coupled plasma mass spectrometry

A 'click' based fluorescent probe mimicking the IMPLICATION logic gate for Cu(II) and Pb(II) sensing: DFT and molecular docking studies

'Click' derived 1,2,3-triazole appended scaffolds are intriguing candidates for selective metal ion recognition because of their stereospecificity and efficiency. The presented report uses the 'click' approach to introduce a glyoxal bis-(2-hydroxyanil)-based chemosensor probe (GT) via the CuAAC pathway, which can selectively detect Cu(II) and Pb(II) ions, both of which are among the most hazardous and perturbing environmental pollutants. NMR spectroscopy, IR spectroscopy, and mass spectrometry (LCMS) were used to successfully characterize the synthesized probe. The discerning recognition behaviour of the probe for Cu(II) and Pb(II) ions was established through a chemosensing investigation using fluorescence and UV-vis spectroscopy, wherein the fluorescence spectral analysis demonstrated the probe to mimic the IMPLICATION logic gate. Furthermore, the metal-ligand interaction was also validated by 1H NMR and IR spectroscopy of the synthesized GT-metal complex, and UV-vis spectroscopy was also employed to analyze the effect of time and temperature on the capacity of the probe to bind with Cu(II) and Pb(II) ions. Furthermore, the sensor's atherosclerosis-inhibition potential was investigated in silico utilizing docking analysis with tribbles-1 protein, and a density functional theory (DFT) study enhanced the understanding of its structure using the B3LYP functional and the 6311G++(d,p) basis set.

Pathogen detection via inductively coupled plasma mass spectrometry analysis with nanoparticles

Infections caused by viruses and bacteria pose a significant threat to global public health, emphasizing the critical importance of timely and precise detection methods. Inductively coupled plasma mass spectrometry (ICP-MS), a contemporary approach for pathogen detection, offers distinct advantages such as high sensitivity, a wide linear range, and multi-index capabilities. This review elucidates the underexplored application of ICP-MS in conjunction with functional nanoparticles (NPs) for the identification of viruses and bacteria. The review commences with an elucidation of the underlying principles, procedures, target pathogens, and NP requirements for this innovative approach. Subsequently, a thorough analysis of the advantages and limitations associated with these techniques is provided. Furthermore, the review delves into a comprehensive examination of the challenges encountered when utilizing NPs and ICP-MS for pathogen detection, culminating in a forward-looking assessment of the potential pathways for advancement in this domain. Thus, this review contributes novel perspectives to the field of pathogen detection in biomedicine by showcasing the promising synergy of ICP-MS and NPs.

Recent progress in analytical strategies of arsenic-binding proteomes in living systems

Arsenic (As) is one of the most concerning elements due to its high exposure risks to organisms and ecosystems. The interaction between arsenicals and proteins plays a pivotal role in inducing their biological effects on living systems, e.g., arsenicosis. In this review article, the recent advances in analytical techniques and methods of As-binding proteomes were well summarized and discussed, including chromatographic separation and purification, biotin-streptavidin pull-down probes, in situ imaging using novel fluorescent probes, and protein identification. These analytical technologies could provide a growing body of knowledge regarding the composition, level, and distribution of As-binding proteomes in both cells and biological samples, even at the organellar level. The perspectives on analysis of As-binding proteomes are also proposed, e.g., isolation and identification of minor proteins, in vivo targeted protein degradation (TPD) technologies, and spatial As-binding proteomics. The application and development of sensitive, accurate, and high-throughput methodologies of As-binding proteomics would enable us to address the key molecular mechanisms underlying the adverse health effects of arsenicals.

Development of a New Method to Evaluate the Biodistribution of Antibodies Using Non-Radioactive Metal Labeling and Inductively Coupled Plasma Mass Spectrometry

PURPOSE

The use of radiolabeled compounds is associated with a number of limitations. Therefore, a new method for the radioisotope-free evaluation of antibody distribution using metal labeling and inductively coupled plasma-mass spectrometry (ICP-MS) was developed herein.

METHODS

Indium-labeled monoclonal antibodies were administrated intravenously to tumor-bearing mice and cynomolgus monkeys, and antibody concentrations in plasma and tissues were measured by ICP-MS. The results were compared with those obtained using a ligand binding assay (LBA) and radioisotope-labeled antibody administration. Indium-, terbium-, holmium-, and yttrium-labeled cetuximab were co-administered to one C57BL/6 J mouse for simultaneous PK and tissue distribution evaluations.

RESULTS

The administration of a radioactive or non-radioactive indium-labeled anti-human interleukin-6 receptor (hIL-6R) antibody to tumor-bearing hIL-6R transgenic mice resulted in similar plasma antibody concentration-time profiles by ICP-MS, a ligand binding assay (LBA), and gamma-ray detector. Liver, kidney, brain, spleen, and tumor concentrations of antibodies measured by ICP-MS were similar to those after the administration of radiolabeled anti-hIL-6R antibodies. Following the administration of indium-labeled cetuximab to cynomolgus monkeys, plasma antibody concentrations measured by ICP-MS were similar to those measured by LBA, and antibody concentrations in organs were evaluable by ICP-MS. The PK of all metals were similar to antibody PK evaluated by LBA, and concentrations in each tissue were equivalent among metals.

CONCLUSIONS

The assessment of antibody distribution using ICP-MS is a novel alternative to the traditional radiolabeled approach. It facilitates the assessment of antibody distribution in the early stages of drug discovery and accelerates the assessment of target engagement.

Ab initio calculations of the interaction potentials and thermodynamic functions for ArN and ArN. J Comput Chem 2023;44:1189-1198. [PMID: 36708239 DOI: 10.1002/jcc.27078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Argon compounds play an important role in the mass spectrometry with inductively coupled plasma and other applications. At the same time, there is a little knowledge of their electronic terms and thermodynamic functions due to the complexity of experimental observations. In this work, the ab initio simulations are performed to obtain the interatomic interaction potentials for the ground and excited states of ArN and ArN⁺ . Using these potentials, the vibrational-rotational partition functions and thermodynamic properties in the gas phase are calculated for these molecules at the temperature range of 298.15-10,000 K. The errors of the thermodynamic functions associated with the approximation of interatomic interaction potentials are estimated.

Effects of four hormones on the mitigation of ovarian damage in tilapia (Oreochromis niloticus) after copper and cadmium exposure

Female tilapia of the Genetic Improvement of Farmed Tilapia (GIFT) strain were selected as an animal model to study the effects of four hormonal drugs in mitigating ovarian damage following exposure to copper and cadmium. After combined exposure to copper and cadmium in aqueous phase for 30 d, tilapia were randomly injected with oestradiol (E2), human chorionic gonadotropin (HCG), luteinizing hormone releasing hormone (LHRH), or coumestrol and raised in clear water for 7 d Ovarian samples were collected after combined exposure to heavy metals for 30 d and after recovery for 7 d Gonadosomatic index (GSI), copper and cadmium levels in the ovary, reproductive hormone levels in serum, and mRNA expression of key reproductive regulatory factors were determined. After 30 d of exposure to the combined copper and cadmium in aqueous phase, the Cd²⁺ content in tilapia ovarian tissue increased by 1,242.46% (p < 0.05), whereas the Cu²⁺ content, body weight, and GSI decreased by 68.48%, 34.46%, and 60.00% (p < 0.05), respectively. Additionally, E2 hormone levels in tilapia serum decreased by 17.55% (p < 0.05). After drug injection and recovery for 7 d, compared to the negative control group, the HCG group exhibited an increase of 39.57% (p < 0.05) in serum vitellogenin levels. Increases of 49.31%, 42.39%, and 45.91% (p < 0.05) in serum E2 levels were observed, and mRNA expression of 3β-HSD increased by 100.64%, 113.16%, and 81.53% (p < 0.05) in the HCG, LHRH, and E2 groups, respectively. The mRNA expression of CYP11A1 in tilapia ovaries increased by 282.26% and 255.08% (p < 0.05) and mRNA expression of 17β-HSD increased by 109.35% and 111.63% in the HCG and LHRH groups, respectively (p < 0.05). All four hormonal drugs, particularly HCG and LHRH, promoted the restoration of tilapia ovarian function to varying degrees after injury induced by combined exposure to copper and cadmium. This study presents the first hormonal treatment protocol for the mitigation of ovarian damage in fish exposed to combined aqueous phases of copper and cadmium as a strategy to prevent and treat fish ovarian damage induced by heavy metals.

Graphene Oxide-Grafted Hybrid Diblock Copolymer Brush (GO-graft-PEG6k-block-P(MA-POSS)) as Nanofillers for Enhanced Lithium Ion Conductivity of PEO-Based Nanocomposite Solid Polymer Electrolytes

Nanocomposite solid polymer electrolytes (NSPEs) with PEO as the matrix and (i) GO or (ii) GO-graft-PEG_6k or (iii) GO-graft-PEG_6k-block-P(MA-POSS) as nanofillers have been fabricated to elucidate the impact of the filler morphology on the lithium ion conductivity. GO-graft-PEG_6k was obtained by grafting PEG_6k onto GO via esterification. GO-graft-PEG_6k-block-P(MA-POSS) was prepared via surface-initiated atom transfer radical polymerization. Fourier-transform infrared spectroscopy revealed enhanced salt dissociation and complexation between the filler and PEO host that could be attributed to Lewis acid-base interactions. Electrochemical impedance spectroscopy revealed the improved ion conductivity of the fabricated NSPEs as compared with the pristine PEO-LiClO₄. As an example, at 50 °C, the ion conductivity increased to 4.01 × 10^-5 and 6.31 × 10^-5 S cm^-1 with 0.3% GO and 0.3% GO-graft-PEG_6k, respectively, from 2.36 × 10^-5 S cm^-1 of PEO-LiClO₄, suggesting that the filler with brush-like architecture (GO-graft-PEG_6k) is more efficient in enhancing the ion conductivity. Further increase in filler content resulted in lowering of the ion conductivity that could be ascribed to aggregation of the filler. The most dramatic impact on conductivity was observed with the incorporation of brush-like GO-graft-PEG_6k-block-P(MA-POSS) as a nanofiller (3.0 × 10^-4 S cm^-1 at 50 °C with 1.0 wt % filler content). The increase in ion conductivity in the current systems, as opposed to the conventional view, could not be correlated with the content of the amorphous phase of the matrix. The conduction mechanism is still unclear; nevertheless, it could be assumed that in addition to the ion conduction through the PEO matrix, the filler forms additional low-energy ion conducting channels at its interface with the matrix. The pendent POSS nanocages of GO-graft-PEG_6k-block-P(MAPOSS) might probably increase the free volume at the interface with the matrix that is associated with higher chain and ion mobility, thus further enhancing the ion conductivity as compared with GO and GO-graft-PEG_6k. The faster ion dynamics in 1.0 wt % GO-graft-PEG_6k-block-P(MAPOSS) NSPEs has also been verified by the dielectric relaxation studies. Thus, integration of both the PEG and POSS nanocages into GO-grafted brush-like architecture offers a new tool for tuning the lithium ion conductivity for potential Li ion battery applications.

Microbial Transformation of Dissolved Organic Sulfur during the Oxic Process in 47 Full-Scale Municipal Wastewater Treatment Plants

Dissolved organic sulfur (DOS) is a significant part of effluent organic matter of wastewater treatment plants (WWTPs) and poses a potential ecological risk for receiving waters. However, the oxic process is a critical unit of biological wastewater treatment for microorganisms performing organic matter removal, wherein DOS transformation and its mechanism are poorly understood. This study investigated the transformation of DOS during the oxic process in 47 full-scale municipal WWTPs across China from molecular and microbial aspects. Surprisingly, evident differences in DOS variations (ΔDOS) separated sampled WWTPs into two groups: 28 WWTPs with decreased DOS concentrations in effluents (ΔDOS < 0) and 19 WWTPs with increased DOS (ΔDOS > 0). These two groups also presented differences in DOS molecular characteristics: higher nitrogen/carbon (N/C) ratios (0.030) and more peptide-like DOS (8.2%) occurred in WWTPs with ΔDOS > 0, implying that peptide-like DOS generated from microbes contributed to increased DOS in effluents. Specific microbe-DOS correlations (Spearman correlation, p < 0.05) indicated that increased effluent DOS might be explained by peptide-like DOS preferentially being produced during copiotrophic bacterial growth and accumulating due to less active cofactor metabolisms. Considering the potential environmental issues accompanying DOS discharge from WWTPs with ΔDOS > 0, our study highlights the importance of focusing on the transformation and control of DOS in the oxic process.

Determination of selected elements in two commercially available edible aquatic insects (Coleoptera) and their worldwide updated list

Many nations and ethnic groups from underdeveloped and developed countries have used insects as human food since ancient times, a practice that has continued into modern times. In many traditionally entomophagous countries, insects are not a "famine food," and demand for edible insects is clearly a "food of choice" rather than a necessity. From a nutritional point of view, depending on the insect species, gender, insect's diet, and seasons, some species of edible insects have significant amounts of fat, protein, carbohydrates, and vitamins, as well as minerals required for human health, thus representing an alternative food source. In addition to their nutritious content, they may also accumulate pesticide residues, microplastics, and heavy metals from their ecosystems. Therefore, this study analyses some mineral (Ca, Fe, Cu, Zn, Se, Co, Cr, As, and Pb) contents of two selected commercialized aquatic edible beetles, Dytiscus marginalis and Cybister tripunctatus (Dytiscidae), via inductively coupled plasma-mass spectrometry (ICP-MS) and reviews the contemporary list of aquatic edible beetles of the world, summarizing the nutritional characteristics of water beetles with a synthesis of the risks and benefits of edible aquatic beetles in recent literature. The mineral composition of the aquatic beetles is briefly discussed. Antinutritional elements (Pb and As) were detected in aquatic insects, but their contents are below toxic levels for humans. A list of 92 edible aquatic beetle species from Dytiscidae, Gyrinidae, Elmidae, Histeridae, Hydrophilidae, Haliplidae, and Noteridae (Coleoptera) was compiled and updated.

Electrochemical detection of mercuric(ii) ions in aqueous media using glassy carbon electrode modified with synthesized tribenzamides and silver nanoparticles

This study reports the synthesis, characterization, and mercuric ion detection ability of novel tribenzamides having flexible and rigid moieties.

Concentrating rare earth elements in brown coal humic acids by mechanochemical treatment

Coals are now viewed as a promising source of rare earth elements increasingly often. Rare earth elements (REE) are known to occur both in the organic and mineral components of brown coals. This study aims at investigating the applicability of mechanochemical activation for concentrating rare earth elements (including Sc, Y, La and lanthanides) in different brown coal fractions. Mechanochemical activation of brown coal in the absence of reagents, as well as additives of sodium percarbonate, monosodium phosphate, and sodium chloride, was carried out. Mechanochemical activation does not cause degradation of humic acid-REE complexes contained in pristine coal. The REE concentration process in the samples of mechanochemically activated coal can be attributed both to formation of new oxygen-containing groups in humic acids (HA) and to binding of REEs to oxygen-containing groups already contained in coal due to vigorous solid-phase mechanical mixing. A method for mechanochemical activation of coal, which allows one to transfer up to 93 ± 7% REEs into the organic alkali-soluble fraction - the HA fraction (while HA in the pristine coal contain only 38 ± 3% REE) - has been developed. The estimated total concentration of REEs in pristine coal ash is 8000 ppm. The estimated REE content in the ash of the product (HA fraction) is as high as 17 300 ppm. Concentrations of Ce, Nd and Y in the ash of the product are 6000 ppm, 4200 ppm and 2500 ppm, respectively.

RECENT ADVANCES IN INSTRUMENTAL APPROACHES TO TIME-OF-FLIGHT MASS SPECTROMETRY

Time-of-flight mass spectrometry (TOFMS) is one of the simplest and most powerful approaches for mass spectrometry. Realization of the advantages inherent in TOFMS requires innovation in the theory and practice of the technique. Instrumental developments, in turn, create new capabilities that enable applications in chemical measurement. This review focuses on the recent advances in TOFMS instrumentation. New strategies for ion acceleration, multiplexed detection, miniaturized TOFMS instruments, approaches to extend the length of ion flight, and novel ion detection technologies are reviewed. Techniques that change the basic paradigm of TOFMS by measuring m/z based on ion flight distance are considered, as are applications at the frontiers of instrumental performance. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Quantitative Mass Spectrometry Imaging of Biological Systems

Mass spectrometry imaging (MSI) is a powerful, label-free technique that provides detailed maps of hundreds of molecules in complex samples with high sensitivity and subcellular spatial resolution. Accurate quantification in MSI relies on a detailed understanding of matrix effects associated with the ionization process along with evaluation of the extraction efficiency and mass-dependent ion losses occurring in the analysis step. We present a critical summary of approaches developed for quantitative MSI of metabolites, lipids, and proteins in biological tissues and discuss their current and future applications.

A novel rhodamine-based optical probe for mercury(II) ion in aqueous medium: A nanomolar detection, wide pH range and real water sample application

In present work, we designed and synthesized new chemosensor RPy, containing the rhodamine and 2,6-pyridinedicarboxaldehyde functionality, for the selective detection of mercury (II) (Hg²⁺) ion in aqueous DMSO solvents. The RPy acts as "turn ON" probe for Hg²⁺ ion with high selectivity and sensitivity over the series of other competing metal ions based on colorimetric and fluorimetric techniques. Due to the incorporation of two rhodamine moieties enhance the chelation sites for mercury binding, which reflects in the lowering of the detection limit up to 26 nM. The Job plot method confirms the 1:2 stoichiometric interactions between the RPy and Hg²⁺ ion. The formation of the chelation complex between RPy and Hg²⁺ ion with spirolactam ring opening was thoroughly investigated by absorption, emission, ¹H NMR, and mass analysis. The detection of Hg²⁺ ion by RPy is retained at broad pH range 4-9. Further, the probe RPy is successfully explored to measure the contamination of Hg²⁺ ion in the real water samples using spike and recovery method.

A nanomolar detection of mercury(II) ion by a chemodosimetric rhodamine-based sensor in an aqueous medium: Potential applications in real water samples and as paper strips

A new promising rhodamine based colorimetric and fluorometric chemosensor, RDV has been designed and synthesized for specific detection of Hg²⁺ ion. It acts as highly selective "turn-on" fluorescent chemosensor for Hg²⁺ ion without interference from other competitive metal ions in aqueous acetonitrile medium. The drastic color change with addition of Hg²⁺, from colorless to pink, indicates RDV can acts as "naked-eye" indicator for Hg²⁺. The Hg²⁺ promoted selective hydrolysis of appended vinyl ether group in RDV followed by Hg²⁺ chelated complex formation with concomitant opening of spirolactam ring is the plausible sensing mechanism. The detailed absorption, fluorescence, ¹H NMR, ¹³C NMR and mass spectrometry confirms the proposed sensing mechanism. The limit of detection (LOD) of Hg²⁺ by RDV is 136 nM indicating the high sensitivity towards Hg²⁺. The RDV shows consistent spectroscopic response in biological pH range 4-10. In addition to explore practical applicability of RDV, its paper strips have been made and used to detect Hg²⁺ in pure water solution up to 10 ppm level. Furthermore, the potential application of RDV for the sensing of Hg²⁺ in real water samples (tap water and drinking waters from different sources) were also monitored and demonstrated.

Directed Self-Assembly of C4-Symmetric, Oxidovanadate-Centered, Vanadyl(V) Quadruplexes for Ba2+- and Hg2+-Specific Recognition, Transport, and Recovery

Directed assembly of loosely, Na⁺-bound, oxidovanadate-centered quartets of C₄-symmetry from tailor-made chiral N-salicylidene-vanadyl(V) complexes, for the first time, allows for highly efficient Ba²⁺- or Hg²⁺-specific detection (by ⁵¹V NMR and VCD), transport (forming a unique helical capsule or a capped square planar complex, respectively), and green recovery from an aqueous phase containing 4 different alkaline earth ions or from at least 10 different metal ions of similar size and charge capacity into the CHCl₃ layer without interference from oxa- or oxophilic ions like Mg²⁺, Ca²⁺, Cu²⁺, Cd²⁺, and Pb²⁺.

Comparative study on the bioaccumulation and biotransformation of arsenic by some northeastern Atlantic and northwestern Mediterranean sponges

The bioaccumulation and biotransformation of arsenic (As) were studied in six representative marine sponges from the French Mediterranean and Irish Atlantic coasts. Methodologies were carefully optimized in one of the species on Haliclona fulva sponges for two critical steps: the sample mineralization for total As analysis by ICP-MS and the extraction of As species for HPLC-ICP-MS analysis. During the optimization, extractions performed with 0.6 mol L^-1 H₃PO₄ were shown to be the most efficient. Extraction recovery of 81% was obtained which represents the best results obtained until now in sponge samples. Total As analyses and As speciation were performed on certified reference materials and allow confirming the measurement quality both during the sample preparation and analysis. Additionally, this study represents an environmental survey demonstrating a high variability of total As concentrations among the different species, probably related to different physiological or microbial features. As speciation results showed the predominance of arsenobetaine (AsB) regardless of the sponge species, as well as the occurrence of low amounts of dimethylarsinic acid (DMA), arsenate (As(+V)), and unknown As species in some samples. The process responsible for As transformation in sponges is most likely related to sponges metabolism itself or the action of symbiont organisms. AsB is supposed to be implied in the protection against osmolytic stress. This study demonstrates the ability of sponges to accumulate and bio-transform As, proving that sponges are relevant bio-monitors for As contamination in the marine environment, and potential tools in environmental bio-remediation.

Evaluation of Inulin Replacing Chitosan in a Polyurethane/Polysaccharide Material for Pb2+ Removal

Downstream waste from industry and other industrial processes could increase concentration of heavy metals in water. These pollutants are commonly removed by adsorption because it is an effective and economical method. Previously, we reported adsorption capacity of a chitosan/polyurethane/titanium dioxide (TiO₂) composite for three ions in a dynamic wastewater system. There, increasing the chitosan concentration in composite increased the cation removal as well; however, for ratios higher than 50% of chitosan/TiO₂, the manufacturing cost increased significantly. In this work, we address the manufacturing cost problem by proposing a new formulation of the composite. Our hypothesis is that inulin could replace chitosan in the composite formulation, either wholly or in part. In this exploratory research, three blends were prepared with a polyurethane matrix using inulin or/and chitosan. Adsorption was evaluated using a colorimetric method and the Langmuir and Freundlich models. Fourier-transform infrared spectroscopy (FTIR) spectra, scanning electron microscopy (SEM) micrographs, differential scanning calorimetry and thermogravimetric analysis curves were obtained to characterize blends. Results indicate that blends are suitable for toxic materials removal (specifically lead II, Pb²⁺). Material characterization indicates that polysaccharides were distributed in polyurethane’s external part, thus improving adsorption. Thermal degradation of materials was found above 200 °C. Comparing the blends data, inulin could replace chitosan in part and thereby improve the cost efficiency and scalability of the production process of the polyurethane based-adsorbent. Further research with different inulin/chitosan ratios in the adsorbent and experiments with a dynamic system are justified.

Engineering Rugged Field Assays to Detect Hazardous Chemicals Using Spore-Based Bacterial Biosensors

Bacterial whole cell-based biosensors have been genetically engineered to achieve selective and reliable detection of a wide range of hazardous chemicals. Although whole-cell biosensors demonstrate many advantages for field-based detection of target analytes, there are still some challenges that need to be addressed. Most notably, their often modest shelf life and need for special handling and storage make them challenging to use in situations where access to reagents, instrumentation, and expertise are limited. These problems can be circumvented by developing biosensors in Bacillus spores, which can be engineered to address all of these concerns. In its sporulated state, a whole cell-based biosensor has a remarkably long life span and is exceptionally resistant to environmental insult. When these spores are germinated for use in analytical techniques, they show no loss in performance, even after long periods of storage under harsh conditions. In this chapter, we will discuss the development and use of whole cell-based sensors, their adaptation to spore-based biosensors, their current applications, and future directions in the field.

DNA Adducts from Anticancer Drugs as Candidate Predictive Markers for Precision Medicine

Biomarker-driven drug selection plays a central role in cancer drug discovery and development, and in diagnostic strategies to improve the use of traditional chemotherapeutic drugs. DNA-modifying anticancer drugs are still used as first line medication, but drawbacks such as resistance and side effects remain an issue. Monitoring the formation and level of DNA modifications induced by anticancer drugs is a potential strategy for stratifying patients and predicting drug efficacy. In this perspective, preclinical and clinical data concerning the relationship between drug-induced DNA adducts and biological response for platinum drugs and combination therapies, nitrogen mustards and half-mustards, hypoxia-activated drugs, reductase-activated drugs, and minor groove binding agents are presented and discussed. Aspects including measurement strategies, identification of adducts, and biological factors that influence the predictive relationship between DNA modification and biological response are addressed. A positive correlation between DNA adduct levels and response was observed for the majority of the studies, demonstrating the high potential of using DNA adducts from anticancer drugs as mechanism-based biomarkers of susceptibility, especially as bioanalysis approaches with higher sensitivity and throughput emerge.

Inductively Coupled Plasma Zoom-Time-of-Flight Mass Spectrometry

A zoom-time-of-flight mass spectrometer has been coupled to an inductively coupled plasma (ICP) ionization source. Zoom-time-of-flight mass spectrometry (zoom-TOFMS) combines two complementary types of velocity-based mass separation. Specifically, zoom-TOFMS alternates between conventional, constant-energy acceleration (CEA) TOFMS and energy-focused, constant-momentum acceleration (CMA) (zoom) TOFMS. The CMA mode provides a mass-resolution enhancement of 1.5-1.7× over CEA-TOFMS in the current, 35-cm ICP-zoom-TOFMS instrument geometry. The maximum resolving power (full-width at half-maximum) for the ICP-zoom-TOFMS instrument is 1200 for CEA-TOFMS and 1900 for CMA-TOFMS. The CMA mode yields detection limits of between 0.02 and 0.8 ppt, depending upon the repetition rate and integration time-compared with single ppt detection limits for CEA-TOFMS. Isotope-ratio precision is shot-noise limited at approximately 0.2% relative-standard deviation (RSD) for both CEA- and CMA-TOFMS at a 10 kHz repetition rate and an integration time of 3-5 min. When the repetition rate is increased to 43.5 kHz for CMA, the shot-noise limited, zoom-mode isotope-ratio precision is improved to 0.09% RSD for the same integration time.

Ultrasonic nebulization extraction/low pressure photoionization mass spectrometry for direct analysis of chemicals in matrices

A novel ultrasonic nebulization extraction/low-pressure photoionization (UNE-LPPI) system has been designed and employed for the rapid mass spectrometric analysis of chemicals in matrices. An ultrasonic nebulizer was used to extract the chemicals in solid sample and nebulize the solvent in the nebulization cell. Aerosols formed by ultrasonic were evaporated by passing through a transferring tube, and desolvated chemicals were ionized by the emitted light (10.6 eV) from a Krypton discharge lamp at low pressure (∼68 Pa). First, a series of semi/non-volatile compounds with different polarities, such as polycyclic aromatic hydrocarbons (PAHs), amino acids, dipeptides, drugs, nucleic acids, alkaloids, and steroids were used to test the system. Then, the quantification capability of UNE-LPPI was checked with: 1) pure chemicals, such as 9,10-phenanthrenequinone and 1,4-naphthoquinone dissolved in solvent; 2) soil powder spiked with different amounts of phenanthrene and pyrene. For pure chemicals, the correlation coefficient (R(2)) for the standard curve of 9,10-phenanthrenequinone in the range of 3 ng-20 μg mL(-1) was 0.9922, and the measured limits of detection (LOD) was 1 ng ml(-1). In the case of soil powder, linear relationships for phenanthrene and pyrene from 10 to 400 ng mg(-1) were obtained with correlation coefficients of 0.9889 and 0.9893, respectively. At last, the feasibility of UNE-LPPI for the detection of chemicals in real matrices such as tablets and biological tissues (tea, Citrus aurantium peel and sage (Salvia officinalis) leaf) were successfully demonstrated.

Dendritic AIE-active luminogens with a POSS core: synthesis, characterization, and application as chemosensors

Two nano-hybrid dendrimers were synthesized by grafting tetraphenylethene units onto a POSS core, and were used as chemosensors for picric acid and Ru³⁺ ions.

Visual sensor for the detection of trace Cu(II) ions using an immunochromatographic strip

A rapid and simple immunochromatography method based on a gold nanoparticle-labeled monoclonal antibody was developed for the on-site detection of copper (Cu) in water samples. This monoclonal antibody, obtained by a cell fusion technique, recognized the Cu-ethylenediamine-N,N,N',N'-tetraacetic acid (EDTA) complex, but not metal-free EDTA, with high sensitivity and specificity. In optimized conditions, the visual limit of detection for qualitative detection of Cu(II) ions was 10 ng/mL and the LOD for semi-quantitative detection decreased to 0.45 ng/mL with the help of a scanning reader system. The detection process was achieved within 10 min with no cross-reactivity from other heavy metal ions. The recovery of the test samples ranged from 98% to 109%. To our knowledge, this antibody-based test strip for Cu(II) ions has not been previously reported. Based on the above results, this strip sensor could be used as an alternative tool for screening heavy metal pollution in the environment.

Personalized medicine for targeted and platinum-based chemotherapy of lung and bladder cancer

The personalized medicine revolution is occurring for cancer chemotherapy. Biomarkers are increasingly capable of distinguishing genotypic or phenotypic traits of individual tumors, and are being linked to the selection of treatment protocols. This review covers the molecular basis for biomarkers of response to targeted and cytotoxic lung and bladder cancer treatment with an emphasis on platinum-based chemotherapy. Platinum derivatives are a class of drugs commonly employed against solid tumors that kill cells by covalent attachment to DNA. Platinum-DNA adduct levels in patient tissues have been correlated to response and survival. The sensitivity and precision of adduct detection has increased to the point of enabling subtherapeutic dosing for diagnostics applications, termed diagnostic microdosing, prior to the initiation of full-dose therapy. The clinical status of this unique phenotypic marker for lung and bladder cancer applications is detailed along with discussion of future applications.

Sensitive determination of thallium species in drinking and natural water by ionic liquid-assisted ion-pairing liquid-liquid microextraction and inductively coupled plasma mass spectrometry

A fast and simple method involving separation and determination of thallium (Tl) species, based on novel ionic liquid-assisted ion pairing dispersive liquid-liquid microextraction (DLLME) method, was developed. Initially, Tl(III) was selectively complexed with chloride ion to form [TlCl(4)](-) chlorocomplex. Subsequently, tetradecyl(trihexyl)phosphonium chloride ionic liquid (CYPHOS(®) IL 101) was used to form the ion-pair with [TlCl(4)](-) anion followed by extraction. The DLLME procedure was developed by dispersing 80 μL of carbon tetrachloride with 100 μL of ethanol added to the aqueous solution. After DLLME, the upper aqueous phase containing Tl(I) only was removed and analysed by inductively coupled plasma-mass spectrometry (ICP-MS). In contrast to Tl(III), Tl(I) species does not form neither stable nor anionic complexes with chloride ions and it was not extracted into the organic phase. Total Tl concentration was obtained by direct introduction of sample into ICP-MS instrument. The calibration graph for the analyte was linear with a correlation coefficient of 0.9989. Under optimal conditions, detection limit of Tl species was 0.4 ng L(-1). The relative standard deviation (n=10) at 1 ng mL(-1) Tl concentration level was 1.3% for Tl(I) and 1.5% for Tl(III). The method was successfully applied for fast speciation analysis of Tl at ultratrace levels in real water samples.

Inductively coupled plasma-MS in drug development: bioanalytical aspects and applications

The vast majority of today's modern bioanalytical methods for pharmacokinetic, pharmacodynamic and immunogenicity purposes are based on LC-MS/MS and immunoanalytical approaches. Indeed, these methodologies are suitable for a wide range of molecules from small to large. For a smaller but not insignificant group of compounds, LC-MS/MS is not suitable - or in some cases much less suitable - as a reliable bioanalytical methodology, and inductively coupled plasma (ICP)-MS is a more appropriate methodology. ICP-MS is one of these less widely used techniques in drug development. This methodology is predominantly used for elemental bioanalysis for pharmacokinetics, for imaging purposes, for mass-balance, food-effect and biomarker studies. In addition, in the last couple of years an increasing number of applications has been published, where ICP-MS and its various hyphenations (LC-ICP-MS, CE-ICP-MS) have been used for speciation/metabolism and proteomics studies. Here, the analytical potential, the quantitative bioanalytical aspects, the various modes of operation and the challenges of the application of ICP-MS in life sciences applications are given. This includes an overview of recent applications in this area in scientific literature, the various hyphenation possibilities and their application areas and the analysis of the various sample matrices applicable to these fields. It also provides a brief outlook of where the potential of this technique lies in the future of regulated bioanalysis and drug development.

Recognition of Hg2+ and Cr3+ in physiological conditions by a rhodamine derivative and its application as a reagent for cell-imaging studies

A new rhodamine-based receptor, derivatized with an additional fluorophore (quinoline), was synthesized for selective recognition of Hg(2+) and Cr(3+) in an acetonitrile/HEPES buffer medium of pH 7.3. This reagent could be used as a dual probe and allowed detection of these two ions by monitoring changes in absorption and the fluorescence spectral pattern. In both instances, the extent of the changes was significant enough to allow visual detection. More importantly, the receptor molecule could be used as an imaging reagent for detection of Hg(2+) and Cr(3+) uptake in live human cancer cells (MCF7) using laser confocal microscopic studies. Unlike Hg(ClO(4))(2) or Hg(NO(3))(2) salts, HgCl(2) or HgI(2) failed to induce any visually detectable change in color or fluorescence upon interaction with L(1) under identical experimental conditions. Presumably, the higher covalent nature of Hg(II) in HgCl(2) or HgI(2) accounts for its lower acidity and its inability to open up the spirolactam ring of the reagent L(1). The issue has been addressed on the basis of the single-crystal X-ray structures of L(1)·HgX(2) (X(-) = Cl(-) or I(-)) and results from other spectral studies.

Development and applications of fluorogenic probes for mercury(II) based on vinyl ether oxymercuration

Mercury is a major threat to the environment and to human health. It is highly desirable to develop a user-friendly kit for on-site mercury detection. Such a method must be able to detect mercury below the threshold levels for drinking water, 1-2 ppb. We developed a fluorescence method based on the oxymercuration of vinyl ethers to detect mercury in dental and environmental samples. Chloride ions interfered with the oxymercuration reaction, but the addition of AgNO(3) solved this problem. Fine electronic and structural tuning led to the development of a more responsive probe that was less sensitive to chloride ion interference. This second-generation probe could detect 1 ppb mercury ions in water.

Environmental analysis by inductively coupled plasma mass spectrometry

This article reviews the numerous ways in which inductively coupled plasma mass spectrometry has been used for the analysis of environmental samples since it was commercially introduced in 1983. Its multielemental isotopic capability, high sensitivity and wide linear dynamic range makes it ideally suited for environmental analysis. Provided that some care is taken during sample preparation and that appropriate calibration strategies are used to circumvent non-spectroscopic interferences, the technique is readily applicable to the analysis of a wide variety of environmental samples (natural waters, soils, rocks, sediments, vegetation, etc.), using quadrupole, time-of-flight or double-focusing sector-field mass spectrometers. In cases where spectroscopic interferences arising from the sample matrix cannot be resolved, then separation methods can be implemented either on- or off-line, which can simultaneously allow analyte preconcentration, thus further decreasing the already low detection limits that are achievable. In most cases, the blank, prepared by following the same steps as for the sample but without the sample, limits the ultimate detection limits that can be reached.