Electrochemical sensor for catechol and dopamine based on a catalytic molecularly imprinted polymer-conducting polymer hybrid recognition element

Enhancing the substrate selectivity of enzyme mimetics in biosensing and bioassay: Novel approaches

A substantial development in nanoscale materials possessing catalytic activities comparable with natural enzymes has been accomplished. Their advantages were owing to the excellent sturdiness in an extreme environment, possibilities of their large-scale production resulting in higher profitability, and easy manipulation for modification. Despite these advantages, the main challenge for artificial enzyme mimetics is the lack of substrate selectivity where natural enzymes flourish. This review addresses this vital problem by introducing substrate selectivity strategies to three classes of artificial enzymes: molecularly imprinted polymers, nanozymes (NZs), and DNAzymes. These rationally designed strategies enhance the substrate selectivity and are discussed and exemplified throughout the review. Various functional mechanisms associated with applying enzyme mimetics in biosensing and bioassays are also given. Eventually, future directives toward enhancing the substrate selectivity of biomimetics and related challenges are discussed and evaluated based on their efficiency and convenience in biosensing and bioassays.

A Facile Graphene Conductive Polymer Paper Based Biosensor for Dopamine, TNF-α, and IL-6 Detection

Paper-based biosensors are a potential paradigm of sensitivity achieved via microporous spreading/microfluidics, simplicity, and affordability. In this paper, we develop decorated paper with graphene and conductive polymer (herein referred to as graphene conductive polymer paper-based sensor or GCPPS) for sensitive detection of biomolecules. Planetary mixing resulted in uniformly dispersed graphene and conductive polymer ink, which was applied to laser-cut Whatman filter paper substrates. Scanning electron microscopy and Raman spectroscopy showed strong attachment of conductive polymer-functionalized graphene to cellulose fibers. The GCPPS detected dopamine and cytokines, such as tumor necrosis factor-alpha (TNF-α), and interleukin 6 (IL-6) in the ranges of 12.5-400 µM, 0.005-50 ng/mL, and 2 pg/mL-2 µg/mL, respectively, using a minute sample volume of 2 µL. The electrodes showed lower detection limits (LODs) of 3.4 µM, 5.97 pg/mL, and 9.55 pg/mL for dopamine, TNF-α, and IL-6 respectively, which are promising for rapid and easy analysis for biomarkers detection. Additionally, these paper-based biosensors were highly selective (no serpin A1 detection with IL-6 antibody) and were able to detect IL-6 antigen in human serum with high sensitivity and hence, the portable, adaptable, point-of-care, quick, minute sample requirement offered by our fabricated biosensor is advantageous to healthcare applications.

Bimetallic MOF synergy molecularly imprinted ratiometric electrochemical sensor based on MXene decorated with polythionine for ultra-sensitive sensing of catechol

Dual-signal ratiometric molecularly imprinted polymer (MIP) electrochemical sensors with bimetallic active sites and high-efficiency catalytic activity were fabricated for the sensing of catechol (CC) with high selectivity and sensitivity. The amino-functionalization bimetallic organic framework materials (Fe@Ti-MOF-NH₂), coupled with two-dimensional layered titanium carbide (MXene) co-modified glassy carbon electrode provides an expanded surface while amplifying the output signal through the electropolymerization immobilization of polythionine (pTHi) and MIP. The oxidation of CC and pTHi were presented as the response signal and the internal reference signal. The oxidation peak current at +0.42 V rose with increased concentration of CC, while the peak currents of pTHi at -0.20 V remained constant. Compared to the common single-signal sensing system, this one (MIP/pTHi/MXene/Fe@Ti-MOF-NH₂/GCE), a novel ratiometric MIP electrochemical sensor exhibited two segments wide dynamic range of 1.0-300 μM (R² = 0.9924) and 300-4000 μM (R² = 0.9912), as well as an ultralow detection limit of 0.54 μM (S/N = 3). Due to the specific recognition function of MIPs and the advantages of built-in correction of pTHi, the prepared surface imprinting sensor presented an excellent performance in selectivity and reproducibility. Besides, this sensor possessed superior anti-interference ability with ions and biomolecules, excellent reproducibility, repeatability, and acceptable stability. Furthermore, the proposed sensing system exhibits high specific recognition in the determination of environmental matrices and biological fluids in real samples with satisfactory results. Therefore, this signal-enhanced ratiometric MIP electrochemical sensing strategy can accurately and selectively analyze and detect other substances.

Innovative molecularly imprinted electrochemical sensor for the nanomolar detection of Tenofovir as an anti-HIV drug

Tenofovir (TNF) is an antiviral medicine that is utilized to treat the human immunodeficiency virus (HIV). However, its level must be controlled in the human body and environment at the risk of causing kidney and liver problems. Therefore, determining TNF concentration in real samples with more advanced, inexpensive, and accurate sensing systems is essential. In this work, a novel electrochemical nanosensor for TNF determination based on molecularly imprinted polymer (MIP) on the screen-printed electrode modified with functionalized multi-walled carbon nanotubes, graphite carbon nitride, and platinum nanoparticles (MIP-Pt@g-C₃N₄/F-MWCNT/SPE) was constructed through the electro-polymerization approach. The molecularly imprinted polymers were prepared on the electrode surface with TNF as the template molecule and 2-aminophenol (2-AP) as the functional monomer. Moreover, factors that affect sensor response were optimized. Pt@g-C₃N₄/F-MWCNT nanocomposite had an excellent synergistic effect on MIP, allowing rapid and specific identification of the test substance. The results demonstrated that the electro-polymerization of 2-AP supplies large amounts of functional groups for the binding of the template molecules, which remarkably enhances the sensitivity and specific surface area of the MIP sensor. This surface enlargement increased the analyte accessibility to imprinted molecular cavities. Under optimum conditions, the oxidation peak current had a linear relationship with TNF concentration ranging from 0.005 to 0.69 μM with a low detection limit of 0.0030 μM (S/N = 3). The results demonstrated that the designed MIP sensor possesses acceptable sensitivity, repeatability, and reproducibility toward TNF determination. Moreover, the developed sensor was applied to biological and water samples to determine TNF, and satisfactory recovery results of 95.6-104.8% were obtained (RSD less than 10.0%). We confirm that combining as-synthesized nanocomposite Pt@g-C₃N₄/F-MWCNT with MIP improves the limitations of MIP-based nanosensors. The proposed electrode is also compatible with portable potentiostats, allowing on-site measurements and showing tremendous promise as a point-of-care (POC) diagnostic platform.

Molecularly Imprinted Polymer-Based Sensors for Protein Detection

The accurate detection of biological substances such as proteins has always been a hot topic in scientific research. Biomimetic sensors seek to imitate sensitive and selective mechanisms of biological systems and integrate these traits into applicable sensing platforms. Molecular imprinting technology has been extensively practiced in many domains, where it can produce various molecular recognition materials with specific recognition capabilities. Molecularly imprinted polymers (MIPs), dubbed plastic antibodies, are artificial receptors with high-affinity binding sites for a particular molecule or compound. MIPs for protein recognition are expected to have high affinity via numerous interactions between polymer matrices and multiple functional groups of the target protein. This critical review briefly describes recent advances in the synthesis, characterization, and application of MIP-based sensor platforms used to detect proteins.

Non-enzymatic electrochemical sensing of dopamine from COVID-19 quarantine person

The worldwide outbreak of COVID-19 pandemic, is not only a great threat to the victim life but it is leaving invisible devastating negative affect on mental health of quarantined individual because of isolation, depression, bereavement, and loss of income. Therefore, the precise monitoring catecholamine neurotransmitters specifically of dopamine (DA) is of great importance to assess the mental health. Thus, herein we have synthesized Co-based zeolitic imidazolate framework (ZIF-67) through solvothermal method for precise monitoring of DA. To facilitate the fast transportation of ions, highly conductive polymer, poly(3,4-ethylenedioxythiophene; PEDOT) has been integrated on the surface of ZIF-67 which not only provides the smooth pathway for ions/electrons transportation but also saves the electrode from pulverization. The fabricated ZIF-67/PEDOT electrode shows a significant sensing performance towards DA detection in terms of short diffusion pathways by expositing more active sites, over good linear range (15-240 μM) and a low detection limit of (0.04 μM) even in the coexistence of the potentially interfering molecules. The developed ZIF-67/PEDOT sensor was successfully employed for sensitive and selective monitoring of DA from COVID-19 quarantined person blood, thus suggesting reliability of the developed electrode.

Multifunctional Molecularly Imprinted Receptor-Based Polymeric Membrane Potentiometric Sensor for Sensitive Detection of Bisphenol A

Molecularly imprinted polymer (MIP)-based polymeric membrane potentiometric sensors have become an attractive tool for detection of organic species. However, the MIP receptors in potentiometric sensors developed so far are usually prepared by only using single functional monomers. This may lead to low affinities of the MIP receptors due to the lack of diversity of the functional groups, thus resulting in low detection sensitivity of the potentiometric sensors. Additionally, these classical MIP receptors are nonconductive polymers, which are undesirable for the fabrication of an electrochemical sensor. Herein, we describe a novel multifunctional MIP receptor-based potentiometric sensor. The multifunctional MIP receptor is prepared by using two functional monomers, methacrylic acid, and 3-vinylaniline with a dual functionality of both recognition and conduction properties. The poly(aniline) groups are introduced into the methacrylic acid-based MIP by postoxidation of the aniline monomer. Such poly(aniline) groups not only serve as the additional functional groups for selective recognition, but also work as a conducting polymer. The obtained multifunctional MIP receptor shows a high binding capacity and an excellent electron-transfer ability. By using bisphenol A as a model, the proposed multifunctional MIP sensor exhibits a largely improved sensitivity and low noise levels compared to the conventional MIP sensor. We believe that the proposed MIP-based sensing strategy provides a general and facile way to fabricate sensitive and selective MIP-based electrochemical sensors.

Room-Temperature, Ionic-Liquid-Enhanced, Beta-Cyclodextrin-Based, Molecularly Imprinted Polymers for the Selective Extraction of Abamectin

To ensure environmental protection and food quality and safety, the trace level detection of pesticide residues with molecularly imprinted polymers using a more economic, reliable, and greener approach is always demanded. Herein, novel, enhanced, imprinted polymers based on beta-cyclodextrin, using room-temperature, ionic liquid as a solvent for abamectin were developed with a simple polymerization process. The successful synthesis of the polymers was verified, with morphological and structural characterization performed via scanning electron microscope analysis, nitrogen adsorption experiments, and thermogravimetric analysis. The imprinted polymers showed good adsorption ability, which was confirmed with a pseudo-second-order kinetic model and a Langmuir isotherm model, as they exhibit a theoretical adsorption of 15.08 mg g⁻¹ for abamectin. The polymers showed high selectivity for abamectin and significant reusability without significant performance loss. The MIPs were used to analyze abamectin in spiked apple, banana, orange, and grape samples, and as a result, a good recovery of 81.67−101.47%, with 1.26−4.36% relative standard deviation, and limits of detection and quantitation of 0.02 µg g⁻¹ and 0.05 µg g⁻¹, respectively, was achieved within a linear range of 0.03−1.50 µg g⁻¹. Thus, room-temperature, ionic-liquid-enhanced, beta-cyclodextrin-based, molecularly imprinted polymers for the selective detection of abamectin proved to be a convenient and practical platform.

Gold-Modified Molecularly Imprinted N-Methacryloyl-(l)-phenylalanine-containing Electrodes for Electrochemical Detection of Dopamine

A molecularly imprinted polymer-based pencil graphite electrode (MIP PGE) sensor, modified with gold nanoparticles, was utilized for the detection of dopamine in the presence of other biochemical compounds using cyclic voltammetry (CV) and differential pulse voltammetry (DPV), depending on its strong electroactivity function. The pulse voltammetry methods recorded the highest response. In addition to the high oxidation rate of DA and the other biomolecule interferences available in the sample matrix used, which cause overlapping voltammograms, we aimed to differentiate them in a highly sensitive limit of detection range. The calibration curves for DA were obtained using the CV and DPV over the concentration range of 0.395–3.96 nM in 0.1 M phosphate buffer solution (PBS) at pH 7.4 with a correlation coefficient of 0.996 and a detection limit of 0.193 nM. The electrochemical technique was employed to detect DA molecules quantitatively in human blood plasma selected as real samples without applying any pre-treatment processes. MIP electrodes proved their ability to detect DA with high selectivity, even with epinephrine and norepinephrine competitor molecules and interferences, such as ascorbic acid (AA). The high level of recognition achieved by molecularly imprinted polymers (MIPs) is essential for many biological and pharmaceutical studies.

Hydrogel tapes for fault-tolerant strong wet adhesion

Fast and strong bio-adhesives are in high demand for many biomedical applications, including closing wounds in surgeries, fixing implantable devices, and haemostasis. However, most strong bio-adhesives rely on the instant formation of irreversible covalent crosslinks to provide strong surface binding. Repositioning misplaced adhesives during surgical operations may cause severe secondary damage to tissues. Here, we report hydrogel tapes that can form strong physical interactions with tissues in seconds and gradually form covalent bonds in hours. This timescale-dependent adhesion mechanism allows instant and robust wet adhesion to be combined with fault-tolerant convenient surgical operations. Specifically, inspired by the catechol chemistry discovered in mussel foot proteins, we develop an electrical oxidation approach to controllably oxidize catechol to catecholquinone, which reacts slowly with amino groups on the tissue surface. We demonstrate that the tapes show fast and reversible adhesion at the initial stage and ultrastrong adhesion after the formation of covalent linkages over hours for various tissues and electronic devices. Given that the hydrogel tapes are biocompatible, easy to use, and robust for bio-adhesion, we anticipate that they may find broad biomedical and clinical applications.

Self-Diagnostic Polymers-Inline Detection of Thermal Degradation of Unsaturated Poly(ester imide)s

Monitoring polymer degradation is an important quest, particularly relevant for industry. Although many indirect methodologies for assessing polymer degradation exist, only few are applicable for an inline-monitoring via optic detection-systems. An inline-monitoring system is introduced for the thermal degradation of crosslinked poly(ester imide)s (PEIs) by embedding trifluoroacetyl functionalized stilbene molecules, serving as chemosensors to track the release of generated alcoholic byproducts. Nucleophilic addition of an alcohol to the sensors trifluoroacetyl functionality triggers hemiacetal formation which is accompanied by significant changes in optical properties, in turn allowing monitoring of sensor activation by direct spectroscopy. Fluorescence spectroscopy offers an easy detection tool for the inline thermal monitoring of PEI-degradation.

Gut microbiota derived trimethylamine N-oxide (TMAO) detection through molecularly imprinted polymer based sensor

Trimethylamine N-oxide (TMAO), a microbiota-derived metabolite has been implicated in human health and disease. Its early detection in body fluids has been presumed to be significant in understanding the pathogenesis and treatment of many diseases. Hence, the development of reliable and rapid technologies for TMAO detection may augment our understanding of pathogenesis and diagnosis of diseases that TMAO has implicated. The present work is the first report on the development of a molecularly imprinted polymer (MIP) based electrochemical sensor for sensitive and selective detection of TMAO in body fluids. The MIP developed was based on the polypyrrole (PPy), which was synthesized via chemical oxidation polymerization method, with and without the presence of TMAO. The MIP, NIP and the non-sonicated polymer (PPy-TMAO) were separately deposited electrophoretically onto the hydrolyzed indium tin oxide (ITO) coated glasses. The chemical, morphological, and electrochemical behavior of MIP, non-imprinted polymer (NIP), and PPy-TMAO were characterized using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and electrochemical techniques. The detection response was recorded using differential pulse voltammetry (DPV), which revealed a decrease in the peak current with the increase in concentration of TMAO. The MIP sensor showed a dynamic detection range of 1-15 ppm with a sensitivity of 2.47 µA mL ppm^-1 cm^-2. The developed sensor is easy to construct and operate and is also highly selective to detect TMAO in body fluids such as urine. The present research provides a basis for innovative strategies to develop sensors based on MIP to detect other metabolites derived from gut microbiota that are implicated in human health and diseases.

Molecularly Imprinted Micelles for Fluorescent Sensing of Nonsteroidal Anti-Inflammatory Drugs (NSAIDs)

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used over-the-counter drugs and their uncontrolled disposal is a significant environmental concern. Although their fluorescent sensing is a desirable method of detection for its sensitivity and simplicity, the structural similarity of the drugs makes the design of selective sensors highly challenging. A thiourea-based fluorescent functional monomer was identified in this work to enable highly efficient synthesis of molecularly imprinted nanoparticle (MINP) sensors for NSAIDs such as Indomethacin or Tolmetin. Micromolar binding affinities were obtained in aqueous solution, with binding selectivities comparable to those reported for polyclonal antibodies. The detection limit was ~50 ng/mL in aqueous solution, and common carboxylic acids such as acetic acid, benzoic acid, and citric acid showed negligible interference.

Molecularly imprinted sol-gel electrochemical sensor for sildenafil based on a pencil graphite electrode modified by Preyssler heteropolyacid/gold nanoparticles/MWCNT nanocomposite

An electrochemical sensor based on the imprinted sol-gel on pencil graphite electrode (PGE) modified with functionalized multiwalled carbon nanotube (MWCNT), gold nanoparticles (AuNPs), and Preyssler heteropolyacid (PHPA) nanohybrid was fabricated for the determination of trace amounts of sildenafil. The pencil graphite electrode was first deposited by the AuNPs@PHPA-MWCNT nanohybrids, and then, the modified electrode of MIP-sol-gel/AuNPs@PHPA-MWCNTs was prepared by the electrochemical method. The synthesized nanohybrids and prepared modified electrodes were characterized with FE-SEM, FTIR, EDX, XRD, and UV/Vis. Cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse voltammetry techniques were applied for the electrochemical analysis using the modified electrodes. By measuring the oxidation and reduction currents of the potassium ferricyanide probe, the efficiency of this sensor was evaluated for the detection of sildenafil. The anodic peak current was measured at 0.2 V vs. Ag/AgCl by differential pulse voltammetry in the potential range - 0.1 to 0.5 V (vs. Ag/AgCl). Under the optimum conditions, the current response for the detection of sildenafil was linear in two concentration ranges of 0.1-2 and 2-30 nM and the obtained limit of detection was 0.033 nM. The constructed sensor was used for the measurement of sildenafil in real samples.

Electrochemical sensor based on CuSe for determination of dopamine

A simple binary copper selenide, CuSe nanostructure, has been investigated as electrochemical sensor for dopamine detection. The hydrothermally synthesized and electrodeposited CuSe nanostructures showed high sensitivity for dopamine detection with low limit of detection (LOD). A sensitivity of 26 μA/μM.cm² was obtained with this electrochemical sensor which is ideal to detect even small fluctuations in the transient dopamine concentration. Apart from high sensitivity and low LOD, the dopamine oxidation on the catalyst surface also occurred at a low applied potential (< 0.18 V vs Ag|AgCl), thereby significantly increasing selectivity of the process specifically with respect to ascorbic and uric acids, which are considered to be the most prominent interferents for dopamine detection. Electrochemical redox tunability of the catalytic Cu center along with low coordination geometry is believed to enhance the rate of dopamine attachment and oxidation on the catalyst surface thereby reducing the applied potential. The presence of Cu also increases conductivity of the catalyst composite which further improves the charge transfer thus increasing the sensitivity of the device. This is the first report of electrochemical dopamine sensing with a simple binary selenide comprising earth-abundant elements and can have large significance in designing efficient sensors that can be transformative for understanding neurodegenerative diseases further. Graphical abstract.

Employing Conductive Metal-Organic Frameworks for Voltammetric Detection of Neurochemicals

This paper describes the first implementation of an array of two-dimensional (2D) layered conductive metal-organic frameworks (MOFs) as drop-casted film electrodes that facilitate voltammetric detection of redox active neurochemicals in a multianalyte solution. The device configuration comprises a glassy carbon electrode modified with a film of conductive MOF (M₃HXTP₂; M = Ni, Cu; and X = NH, 2,3,6,7,10,11-hexaiminotriphenylene (HITP) or O, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP)). The utility of 2D MOFs in voltammetric sensing is measured by the detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), and serotonin (5-HT) in 0.1 M PBS (pH = 7.4). In particular, Ni₃HHTP₂ MOFs demonstrated nanomolar detection limits of 63 ± 11 nM for DA and 40 ± 17 nM for 5-HT through a wide concentration range (40 nM-200 μM). The applicability in biologically relevant detection was further demonstrated in simulated urine using Ni₃HHTP₂ MOFs for the detection of 5-HT with a nanomolar detection limit of 63 ± 11 nM for 5-HT through a wide concentration range (63 nM-200 μM) in the presence of a constant background of DA. The implementation of conductive MOFs in voltammetric detection holds promise for further development of highly modular, sensitive, selective, and stable electroanalytical devices.

How Reliable Is the Electrochemical Readout of MIP Sensors?

Electrochemical methods offer the simple characterization of the synthesis of molecularly imprinted polymers (MIPs) and the readouts of target binding. The binding of electroinactive analytes can be detected indirectly by their modulating effect on the diffusional permeability of a redox marker through thin MIP films. However, this process generates an overall signal, which may include nonspecific interactions with the nonimprinted surface and adsorption at the electrode surface in addition to (specific) binding to the cavities. Redox-active low-molecular-weight targets and metalloproteins enable a more specific direct quantification of their binding to MIPs by measuring the faradaic current. The in situ characterization of enzymes, MIP-based mimics of redox enzymes or enzyme-labeled targets, is based on the indication of an electroactive product. This approach allows the determination of both the activity of the bio(mimetic) catalyst and of the substrate concentration.

Molecularly imprinted polymer-based bioelectrical interfaces with intrinsic molecular charges

For enzyme-/antibody-free and label-free biosensing, a molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges based on the small biomolecule–PBA diol binding, has been demonstrated to be suitable for the bioelectrical interface of biologically coupled gate field-effect transistor (bio-FET) sensors. MIP-coated gate FET sensors selectively detect various small biomolecules such as glucose, dopamine, sialic acid, and oligosaccharides without using labeled materials. In particular, the well-controlled MIP film by surface-initiated atom transfer radical polymerization (SI-ATRP) contributes to the quantitative analysis of small biomolecule sensing, resulting in potentiometric Langmuir isotherm adsorption analysis by which the parameters such as the binding affinity between small biomolecules and MIP cavities are evaluated. Also, the output electrical signal of even a random MIP-coated gate FET sensor is quantitatively analyzed using the bi-Langmuir adsorption isotherm equation, showing the adsorption mechanism of small biomolecules onto the template-specific MIP membrane. Thus, a platform based on the MIP bioelectrical interface for the bio-FET sensor is suitable for an enzyme-/antibody-free and label-free biosensing system in the fields of clinical diagnostics, drug discovery, the food industry, and environmental research.

A molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges, is suitable for the bioelectrical interface of field-effect transistor (FET) sensors.

Selective Binding of Dopamine and Epinephrine in Water by Molecularly Imprinted Fluorescent Receptors

Catecholamines play important roles in biology but their structural similarity makes it challenging to construct synthetic receptors with selective binding. A combination of covalent and noncovalent binding groups in the hydrophobic core of water-soluble nanoparticles enabled them to recognize dopamine and epinephrine with an association constant (Ka ) of 3-4×104  M-1 in water, an order of magnitude higher than those of previously reported synthetic hosts. In addition, minute structural changes among analogues were detected including the addition or removal of a single hydroxyl or methyl group.

A chitosan gold nanoparticles molecularly imprinted polymer based ciprofloxacin sensor

In this work, we present a novel study on the development of an electrochemical biomimetic sensor to detect the ciprofloxacin (CIP) antibiotic. A chitosan gold nanoparticles decorated molecularly imprinted polymer (Ch-AuMIP) was used to modify the glassy carbon electrode (GCE) for preparation of the sensor. The Ch-AuMIP was characterized to understand various properties like chemical composition, morphology, roughness, and conduction using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and cyclic voltammetry (CV) respectively. Several experimental conditions affecting the Ch-AuMIP/GCE sensor such as the CIP removal agent, the extraction time, the volume of Ch-AuMIP drop-cast onto GCE and the rebinding time were studied and optimized. The Ch-AuMIP sensor sensitivity was studied in the concentration range of 1-100 μmol L-1 exhibiting a limit of detection of 210 nmol L-1. The synergistic combination of Au nanoparticles and Ch-MIP helps detect the CIP antibiotic with good sensitivity and selectivity, respectively. We investigated the selectivity aspect by using some possible interfering species and the developed sensing system showed good selectivity for CIP with a 66% response compared to the other compounds (≤45% response). The proposed sensing strategy showed its applicability for successful detection of CIP in real samples like tap water, mineral water, milk, and pharmaceutical formulation. The developed sensor showed good selectivity towards CIP even among the analogue molecules of Norfloxacin (NFX) and Ofloxacin (OFX). The developed sensor was successfully applied to determine the CIP in different samples with a satisfactory recovery in the range of 94 to 106%.

SERS-Based Molecularly Imprinted Plasmonic Sensor for Highly Sensitive PAH Detection

A novel hybrid plasmonic platform based on the synergetic combination of a molecularly imprinted polymer (MIP) thin film with Au nanoparticle (NPs) assemblies, noted as Au@MIP, was developed for surface-enhanced Raman scattering (SERS) spectroscopy recognition of polycyclic aromatic hydrocarbons (PAHs). While the MIP trapped the PAH close to the Au surface, the plasmonic NPs enhanced the molecule's Raman signal. The Au@MIP fabrication comprises a two-step procedure, first, the layer-by-layer deposition of Au NPs on glass and their further coating with a uniform MIP thin film. Profilometry analysis demonstrated that the thickness and homogeneity of the MIP film could be finely tailored by tuning different parameters such as prepolymerization time or spin-coating rate. Two different PAH molecules, pyrene or fluoranthene, were used as templates for the fabrication of pyrene- or fluoranthene-based Au@MIP substrates. The use of pyrene or fluoranthene, as the template molecule to fabricate the Au@MIP thin films, enabled its ultradetection in the nM regime with a 100-fold improvement compared with the nonimprinted plasmonic sensors (Au@NIPs). The SERS data analysis allowed to estimate the binding constant of the template molecule to the MIP. The selectivity of both pyrene- and fluoranthene-based Au@MIPs was analyzed against three PAHs of different sizes. The results displayed the important role of the template molecule used for the Au@MIPs fabrication in the selectivity of the system. Finally, the practical applicability of pyrene-based Au@MIPs was shown by performing the detection of pyrene in two real samples: creek water and seawater. The design and optimization of this type of plasmonic platform will pave the way for the detection of other relevant (bio)molecules in a broad range of fields such as environmental control, food safety, or biomedicine.

Multifunctional, fluorescent DNA-derived carbon dots for biomedical applications: bioimaging, luminescent DNA hydrogels, and dopamine detection

Here, we describe the synthesis of 2-3 nm, hydrophilic, blue fluorescence-emitting carbon dots (C-Dots, made using a DNA precursor) by the hydrothermal route from the gelling concentration of 2% (w/v) DNA. These dots exhibited highly efficient internalization in pathogenic fungal cells, negligible cytotoxicity, good PL stability, and high biocompatibility, thus demonstrating their potential as nanotrackers in microbial studies. Bioimaging was performed using Candida albicans as the representative for microbial pathogens. The novelty of these dots is that they formed fluorescent nanocomposite hydrogels with the same DNA much below the gelation concentration (1% w/v) and the tunable gels possessed strength between 20 and 80 Pa with the corresponding gelation temperature T_gel between 40 to 50 °C. The network density and gelation free energy data supported the superior crosslinking ability of these dots. The as-prepared hydrogels can replace the existing toxic quantum dot-based hydrogels for drug delivery. We also demonstrated the use of a DNA hydrogel-fabricated working electrode (DNA-C-Dot/ITO electrode) for the biosensing of dopamine. Our electrochemical biosensor had a detection limit of 5 × 10^-3 mM for dopamine. These multifunctional, fluorescent C-Dots and hydrogel after suitable conjugation or loading with molecules and drugs hold promising potential for further exploitation in bioimaging, targeted drug delivery, wound healing, and biosensing applications.

Complex numbers-partial least-squares applied to the treatment of electrochemical impedance spectroscopy data

This work investigated the application of partial least-squares regression of complex numbers on multivariate data obtained by electrochemical impedance spectroscopy (EIS). The use of complex numbers-PLS was evaluated in the individual determination of two well-known redox probes: ferrocyanide and hydroquinone. The predictive ability of complex numbers-PLS was evaluated for EIS spectra obtained at different applied potentials and perturbation amplitudes, and was also compared to that obtained with PLS applied to EIS data presented as real numbers - only the real or imaginary part of the complex impedance, or the absolute impedance or the phase angle. It is shown that complex numbers-PLS is more efficient (better prediction models) when more complex electrochemical systems (hydroquinone) are probed. Excellent predictions were obtained for the determination of hydroquinone and catechol in the direct analysis of spiked tap water samples with EIS and complex numbers-PLS.

Molecularly imprinted polymer-based sensor for electrochemical detection of erythromycin

The increasing global reports on the occurrence of macrolide antibiotics resistance, especially erythromycin (Ery) resistant strains, suggests the possible presence of these antibiotics in the environment hence, their inclusion in the EU watchlist of water pollutants. Consequently, there is an urgent need for the development of portable and cost effective analytical sensing devices for their monitoring in water. The combination of molecularly imprinted polymer (MIP) as a sensing element with a portable electrochemical transducer such as screen printed electrode (SPE) may offer a valuable approach for the desired routine environmental monitoring. This work demonstrates the preparation of an electrochemical MIP-based sensor for Ery detection in aqueous media. Ery-selective MIP, Ery-MIP was generated directly on SPE, Ery-MIP/SPE via electrochemical polymerization of m-phenylenediamine (mPD). The optimization of sensor performance was achieved with special attention given to the selection of functional monomer, template removal, polymer thickness and incubation time. Ery-MIP/SPE sensor demonstrated the ability to discriminate target analyte against very close analogues i.e clarithromycin and azithromycin in both PBS and tap water. In addition, Ery-MIP/SPE could detect Ery down to low limits (LOD = 0.1 nM and LOQ = 0.4 nM) and exhibited good recovery in tap water. The presented analytical approach could be potentially suited and/or further developed for adequate monitoring of Ery as well as other macrolides in environmental water.

Zwitterionic Molecularly Imprinted Cross-Linked Micelles for Alkaloid Recognition in Water

Molecular imprinting within surface/core doubly cross-linked micelles afforded water-soluble nanoparticle receptors for their template molecules. Extremely strong imprinting effects were consistently observed, with the imprinting factor >100:1 in comparison to nonimprinted nanoparticles prepared without the templates. The ionic nature of the cross-linkable surfactant strongly impacted the imprinting and binding process. Imprinted receptors prepared with a zwitterionic cross-linkable surfactant (4) outperformed a similar cationic one (1) when the template was zwitterionic or cationic and preferred their templates over structural analogues regardless of their ionic characteristics. Electrostatic interactions, however, dominated the receptors made with the cationic surfactant. The same micellar imprinting applied to simple as well as complex alkaloids. Imprinted receptors from 4 were also shown to categorize their alkaloid guests according to their structural similarity.

Effects of nano-confinement and conformational mobility on molecular imprinting of cross-linked micelles

Molecular imprinting is a facile method to create guest-complementary binding sites in a cross-linked polymeric network. When performed within cross-linked micelles, the resulting molecularly imprinted nanoparticles (MINPs) exhibited an extraordinary ability to distinguish subtle structural changes in the guest, including the shift of a hydrophilic or hydrophobic group by 1 carbon and addition of a single methylene/methyl group. A high surface-cross-linking density prior to core-cross-linking was key to the high-fidelity imprinting, enhancing both the binding affinity of the imprinted micelle for the template and selectivity among structural analogues. Whereas the imprinted site closely complemented the hydrophilic surface anchoring group and rigid hydrophobic aromatic core, it was expanded significantly for a conformationally mobile small group (i.e., methoxy).

Synthetic nanoparticles for selective hydrolysis of bacterial autoinducers in quorum sensing

N-acyl homoserine lactones (AHLs) are signal molecules used by a large number of gram-negative bacteria in quorum sensing and their hydrolysis is known to inhibit biofilm formation. Micellar imprinting of AHL-like templates with catalytic functional monomers yielded water-soluble nanoparticles with AHL-shaped active site and nearby catalytic groups. Either Lewis acidic zinc ions or nucleophilic pyridyl ligands could be introduced through this strategy, yielding artificial enzymes for the hydrolysis of AHLs in a substrate-selective fashion.

Binding-promoted chemical reaction in the nanospace of a binding site: effects of environmental constriction

Chemical reactions in a confined nanospace can be very different from those in solution. Imine formation between molecular amines and an aldehyde inside a molecularly imprinted receptor was promoted strongly by the binding. Although how well the amine fit in the binding pocket and its electronic nature both influenced the reaction, the freedom of movement for the amine was the most important factor determining the binding-normalized reactivity.

Electrochemical Chiral Recognition of Tryptophan Isomers Based on Nonionic Surfactant-Assisted Molecular Imprinting Sol-Gel Silica

A new molecularly imprinted SiO₂ (MISiO₂) film on the surface of indium tin oxide (ITO) electrode was prepared by the sol-gel method and was then applied successfully in the electrochemical chiral recognition of tryptophan (Trp) isomers. Owing to the high chemical stability, excellent rigidity, and low cost, the resultant sol-gel SiO₂ is a good matrix material for molecular imprinting. Nonionic surfactant cicosaethylene glycol hexadecyl ether (Brij58) arranged directionally on the surface of the hydrophobic ITO electrode possesses a large amount of oxygen-containing functional groups and may induce the accumulation of template molecules (L-Trp) on the surface of ITO, resulting in L-MISiO₂/ITO after the removal of L-Trp templates by calcination. The characterizations of the L-MISiO₂/ITO reveal that the L-Trp templates could be successfully removed from the matrix, producing complementary cavities within the L-MISiO₂/ITO. The resultant L-MISiO₂/ITO exhibits greatly higher affinity toward L-Trp than D-Trp due to the three-point interaction mechanism, and therefore it exhibits good chiral recognition ability for the Trp isomers. In addition, the as-prepared L-MISiO₂/ITO or D-MISiO₂/ITO (D-Trp as the templates) can predict the ratio of L- and D-isomers in racemic mixture. Last, the MISiO₂ films exhibited quick binding kinetics and good recognition reproducibility.

Advances in Molecularly Imprinting Technology for Bioanalytical Applications

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields.

Tuning surface-cross-linking of molecularly imprinted cross-linked micelles for molecular recognition in water

Molecular recognition in water is an important challenge in supramolecular chemistry. Surface-core double cross-linking of template-containing surfactant micelles by the click reaction and free radical polymerization yields molecularly imprinted nanoparticles (MINPs) with guest-complementary binding sites. An important property of MINP-based receptors is the surface-cross-linking between the propargyl groups of the surfactants and a diazide cross-linker. Decreasing the number of carbons in between the two azides enhanced the binding affinity of the MINPs, possibly by keeping the imprinted binding site more open prior to the guest binding. The depth of the binding pocket can be controlled by the distribution of the hydrophilic/hydrophobic groups of the template and was found to influence the binding in addition to electrostatic interactions between oppositely charged MINPs and guests. Cross-linkers with an alkoxyamine group enabled two-stage double surface-cross-linking that strengthened the binding constants by an order of magnitude, possibly by expanding the binding pocket of the MINP into the polar region. The binding selectivity among very similar isomeric structures also improved.