Organohalogen and Organophosphorous Pesticide Method for Ginseng Root — A Comparison of Gas Chromatography-Single Quadrupole Mass Spectrometry with High Resolution Time-of-Flight Mass Spectrometry

Advances in sample preparation methods for pesticide residue analysis in medicinal plants: A focus on Nepal

Medicinal plant safety is a rising challenge worldwide due to the continued overuse of pesticides to their maximum residue limits. Due to the high demand for medicinal plants, their production is being increased and sometimes protected by pesticide use. The analysis of these residues requires robust analytical methods to ensure the safety and quality of medicinal plants. Developing effective sample preparation for detecting pesticides is challenging, due to their diverse natures, classes, and physico-chemical characteristics. Hence, existing techniques and strategies are needed to improve the reliability of the results. The review discusses the current state of sample preparation techniques, analytical methods, and instrumental technologies employed in pesticide residue analysis in medicinal plants. It highlights the challenges, limitations, and advancements in the field, providing insights into the analytical strategies used to detect and quantify pesticide residues. Reliable, accessible, affordable, and high-resolution analytical procedures are essential to ensure that pesticide levels in medicinal plants are effectively regulated. By understanding the complexities of pesticide residue analysis in medicinal plants, this review article aims to support the conservation of medicinal plant resources, promote public health, and contribute to the development of sustainable strategies for ensuring the safety and quality of medicinal plants in Nepal. The findings of this review will benefit researchers, policymakers, and stakeholders involved in the conservation of medicinal plant resources and the promotion of public health.

Development of a method for analysis and risk assessment of residual pesticides in ginseng using liquid and gas chromatography-tandem mass spectrometry

In this study, we developed a method for detecting 335 pesticides in ginseng using liquid chromatography quadrupole mass spectrometry (LC-MS/MS) and gas chromatography quadrupole mass spectrometry (GC-MS/MS). Additionally, the linearity, sensitivity, selectivity, accuracy, and precision of the method was validated. The limits of detection (LOD) and limits of quantification (LOQ) for the instrument used in these experiments was 0.1-5.8 μg/kg and 0.3-17.5 μg/kg, respectively. The average recovery was 71.6-113.4%. From 2016 to 2019, 467 ginseng samples were analyzed, of which 304 samples detected pesticide residues, but most of them were below the standard. It can be observed that the hazard quotient (HQ) of ginseng for detected pesticides was less than 1, thus implying that the risk was low. Hence, in this study, we developed a specific, reliable, and suitable method for a fast and simultaneous analysis of 335 pesticides in ginseng.

Simultaneous analytical method for 296 pesticide multiresidues in root and rhizome based herbal medicines with GC-MS/MS

A method for the simultaneous analysis of pesticide multiresidues in three root/rhizome-based herbal medicines (Cnidium officinale, Rehmannia glutinosa, and Paeonia lactiflora) was developed with GC-MS/MS. To determine the concentrations of pesticide residues, 5 g of dried samples were saturated with distilled water, extracted with 10 mL of 0.1% formic acid in acetonitrile/ethyl acetate (7:3, v/v), and then partitioned using magnesium sulfate and sodium chloride. The organic layer was purified with Oasis PRiME HLB plus light, followed by a cleanup with dispersive solid-phase extraction containing alumina. The sample was then injected into GC-MS/MS (2 μL) using a pulsed injection mode at 15 psi and analyzed using multiple reaction monitoring (MRM) modes. The limit of quantitation for the 296 target pesticides was within 0.002-0.05 mg/kg. Among them, 77.7-88.5% showed recoveries between 70% and 120% with relative standard deviations (RSDs) ≤20% at fortified levels of 0.01, and 0.05 mg/kg. The analytical method was successfully applied to real herbal samples obtained from commercial markets, and 10 pesticides were quantitatively determined from these samples.

Magnetic graphitized carbon black based on crystal growth method combined with high-resolution mass spectrometry for screening of 300 pesticide residues in Radix Codonopsis and Angelica sinensis

In this study, a high-throughput method for analyzing 300 pesticide residues in Radix Codonopsis and Angelica sinensis was established by liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-Q-TOF/MS) using iron tetroxide loaded graphitized carbon black magnetic nanomaterial (GCB/Fe₃O₄) as the purification material. It was optimized that saturated salt water and 1 % acetate acetonitrile were used as the extraction solution, then the supernatant was purified with 2 g anhydrous CaCl₂ and 300 mg GCB/Fe₃O₄. As a result, 300 pesticides in Radix Codonopsis and 260 in Angelica sinensis achieved satisfactory results. The limits of quantification of 91 % and 84 % of the pesticides in Radix Codonopsis and Angelica sinensis reached 10 μg/kg, respectively. The matrix-matched standard curves ranging from 10 to 200 μg/kg were established with correlation coefficients (R) above 0.99. The pesticides meeting SANTE/12682/2021 accounted for 91.3 %, 98.3 %, 100.0 % and 83.8 %, 97.3, 100.0 % of the total pesticides added in Radix Codonopsis and Angelica sinensis respectively, which were spiked at 10, 20,100 μg/kg. The technique was applied to screen 20 batches of Radix Codonopsis and Angelica sinensis. Five pesticides were detected, three of which were prohibited according to the Chinese Pharmacopoeia (2020 Edition). The experimental results showed that GCB/Fe₃O₄ coupled with anhydrous CaCl₂ exhibited good adsorption performance and could be used for sample pretreatment of various pesticide residues in Radix Codonopsis and Angelica sinensis. Compared with the reported methods for determining pesticides in traditional Chinese medicine (TCM), the proposed method has the advantage of less time-consuming in the clean-up procedure. Furthermore, as a case study on root TCM, this approach may serve as a reference for other TCM.

A liquid chromatography-time-of-flight/mass spectrometry method for analysis of pesticides and transfer behavior in Radix Codonopsis and Angelica sinensis decoctions

The safety of traditional Chinese medicine (TCM) has garnered considerable interest worldwide. In this study, a high-throughput method for the determination of 255 pesticide residues in decoctions of Radix Codonopsis and Angelica sinensis was developed using liquid chromatography-time-of-flight/mass spectrometry. The methodological verification demonstrated the accuracy and reliability of this method. The frequently detected pesticides in Radix Codonopsis and Angelica sinensis were determined to build a correlation between pesticide properties and the transfer rate of pesticide residues in their decoctions. Water solubility (WS) with a higher correlation coefficient (R) made a significant contribution to the accuracy of the transfer rate prediction model. The regression equations for Radix Codonopsis and Angelica sinensis were T = 13.64 log WS + 10.56 with a correlation coefficient (R) of 0.8617 and T = 10.66 log WS + 25.48 with a correlation coefficient (R) of 0.8072, respectively. This study provides preliminary data on the potential risk of exposure to pesticide residues in Radix Codonopsis and Angelica sinensis decoctions. Furthermore, as a case study on root TCM, this approach may serve as a model for other TCMs.

The safety of Chinese medicine: A systematic review of endogenous substances and exogenous residues

BACKGROUND

Safety and toxicity have become major challenges in the internationalization of Chinese medicine. Inspite of its wide application, security problems of Chinese medicine still occur from time to time, raising widespread concerns about its safety. Most of the studies either only partially discussed the intrinsic toxicities or extrinsic harmful residues in Chinese medicine, or briefly described detoxification and attenuation methods. It is necessary to systematically discuss Chinese medicine's extrinsic and intrinsic toxic components and corresponding toxicity detoxification or detection methods as a whole.

PURPOSE

This review comprehensively summarizes various toxic components in Chinese medicine from intrinsic and extrinsic. Then the corresponding methods for detoxification or detection of toxicity are highlighted. It is expected to provide a reference for safeguards for developing and using Chinese medicine.

METHODS

A literature search was conducted in the databases, including PubMed, Web of Science,Wan-fang database, and the China National Knowledge Infrastructure (CNKI). Keywords used were safety, toxicity, intrinsic toxicities, extrinsic harmful residues, alkaloids, terpene and macrolides, saponins, toxic proteins, toxic crystals, minerals, heavy metals, pesticides, mycotoxins, sulfur dioxide, detoxification, detection, processing (Paozhi), compatibility (Peiwu), Chinese medicine, etc., and combinations of these keywords. All selected articles were from 2006 to 2022, and each was assessed critically for our exclusion criteria. Studies describe the classification of toxic components of Chinese medicine, the toxic effects and mechanisms of Chinese medicine, and the corresponding methods for detoxification or detection of toxicity.

RESULTS

The toxic components of Chinese medicines can be classified as intrinsic toxicities and extrinsic harmful residues. Firstly, we summarized the intrinsic toxicities of Chinese medicine, the adverse effects and toxicity mechanisms caused by these components. Next, we focused on the detoxification or attenuation methods for intrinsic toxicities of Chinese medicine. The other main part discussed the latest progress in analytical strategies for exogenous hazardous substances, including heavy metals, pesticides, and mycotoxins. Beyond reviewing mainstream instrumental methods, we also introduced the emerging biochip, biosensor and immuno-based techniques.

CONCLUSION

In this review, we provide an overall assessment of the recent progress in endogenous toxins and exogenous hazardous substances concerning Chinese medicine, which is expected to render deeper insights into the safety of Chinese medicine.

Medicinal herbs and multiple sclerosis: Overview on the hard balance between new therapeutic strategy and occupational health risk

Multiple sclerosis (MS) is an autoimmune disease characterized by demyelination and axonal loss of the central nervous system (CNS). Despite its spread throughout the world, the mechanisms that determine its onset are still to be defined. Immunological, genetic, viral, and environmental factors and exposure to chemicals may trigger MS. Many studies have highlighted the anti-inflammatory and anti-oxidant effects of medicinal herbs, which make them a natural and complementary treatment for neurodegenerative diseases. A severe reduction of several MS symptoms occurs with herbal therapy. Thus, the request for medicinal plants with potential beneficial effects, for MS patients, is constantly increasing. Consequently, a production increase needs. Unfortunately, many medicinal herbs were untested and their action mechanism, possible adverse effects, contraindications, or interactions with other drugs, are poorly or not investigated. Keeping in mind the pathological mechanisms of MS and the oxidative damages and mitochondrial dysfunctions induced by pesticides, it is important to understand if pesticides used to increase agricultural productivity and their residues in medicinal plants, may increase the risk of developing MS in both workers and consumers. Studies providing some indication about the relationship between environmental exposure to pesticides and MS disease incidence are few, fragmentary, and discordant. The aim of this article is to provide a glance at the therapeutic potential of medicinal plants and at the risk for MS onset of pesticides used by medicinal plant growers and present in medicinal herbs.

Rapid Determination of 21 Chinese Domestically Registered Pesticides in Ginseng Using Cleanup Based on Zirconium-Oxide-Modified Silica and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

In this study, an analytical method was developed for the rapid determination of 21 pesticides used in ginseng cultivation. All pesticides covered by this method have been registered by 2020 in China for use on ginseng. The extracts were cleaned up using zirconium-oxide-modified silica (Z-Sep) and primary secondary amine (PSA). The combination of Z-Sep and PSA provided good recovery for all analytes and the cleanest matrix background out of a number of PSA-based sorbent combinations, as indicated by high-performance liquid chromatography (HPLC) and gas chromatography (GC). Instrumental analysis was completed in 5 min using the ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The linearity (r > 0.99) for all analytes was satisfactory over the calibration range of 0.002-0.1 μg mL^-1. Intraday recoveries (n = 5) at ginseng-spiked levels of 0.02, 0.05, 0.1, and 1 mg kg^-1 ranged between 72% and 119%, with the corresponding relative standard deviations (RSDs), were less than 19%, while the interday recoveries (n = 15) ranged between 77% and 103%, and RSDs were less than 22%. Limits of quantitation (LOQs) ranged between 0.02 and 0.05 mg kg^-1 for all 21 pesticides. This is a seminal study using Z-Sep for the efficient cleanup of ginseng samples, and it could present a practical method for future monitoring of pesticide residues in ginseng produced in China.

A First Tentative for Simultaneous Detection of Fungicides in Model and Real Wines by Microwave Sensor Coupled to Molecularly Imprinted Sol-Gel Polymers

A molecularly imprinted silica (MIS) coupled to a microwave sensor was used to detect three fungicides (iprodione, procymidone and pyrimethanil) present in most French wines. Chemometric methods were applied to interpret the microwave spectra and to correlate microwave signals and fungicide concentrations in a model wine medium, and in white and red Burgundy wines. The developed microwave sensor coupled to an MIS and to its control, a nonimprinted silica (NIS), was successfully applied to detect the three fungicides present in trace levels (ng L^-1) in a model wine. The MIS sensor discriminated the fungicide concentrations better than the NIS sensor. Partial Least Squares models were suitable for determining iprodione in white and red wines. A preliminary method validation was applied to iprodione in the white and red wines. It showed a limit of detection (LOD) lower than 30 ng L^-1 and a recovery percentage between 90 and 110% when the iprodione concentration was higher than the LOD. The determined concentrations were below the authorized level by far.

A comprehensive analysis of 201 pesticides for different herbal species-ready application using gas chromatography-tandem mass spectrometry coupled with QuEChERs

Developing an analysis of multi-pesticide residues for different herbal species-ready applications is a challenge. In the present work, a comprehensive analysis was proposed for rapid detection of 201 pesticides in various medicinal herbs. Samples were extracted and cleaned up with a high throughput pretreatment approach (modified QuEChERS), and then detected by gas chromatograph coupled to an electron impact ionization triple quadrupole mass spectrometer (GC-EI-MS/MS). The clean-up procedure has been optimized using four types of representative medicinal herbs with different primary or secondary metabolites. Moreover, a mixture of analyte protectants (APs) was to improve the peak shape and intensity of some compounds. The performance of the method was validated according to the European Union SANTE/11813/2017 regulatory guidelines. The limit of quantification (LOQ) was determined to be ≤10 ng mL^-1, and the recovery was between 70.0%-120.0%, with ≤20% RSD for the majority of pesticides. Sixty samples belonging to different species of medicinal herbs (such radix, flos, cortex, fructus, and seeds) were analyzed to evaluate the applicability of the optimized method. High frequency of chlorpyrifos was found in Citri reticulatae pericarpium, Crataegi fructus and Cuscutae semen samples.

Molecularly imprinted sol-gel polymers for the analysis of iprodione fungicide in wine: Synthesis in green solvent

Iprodione is a fungicide widely used in viticulture in most agricultural countries. It was banned recently in the European community because of its carcinogenic and endocrine disrupting characters. In this work, a cheap analytical method able to monitor iprodione in a white wine was developed. Molecularly imprinted sol-gel polymers (MIS) specific to iprodione and using green solvents were synthesized. An experimental design having the following factors (solvent volume and crosslinker quantity) was used to prepare an optimal MIS. In terms of selectivity, the optimal MIS showed the best partition coefficient towards iprodione in a white wine containing four other competing fungicides (procymidone, pyrimethanil, azoxystrobin and iprovalicarb). A solid phase extraction method using the optimal MIS was optimized and applied to analyse iprodione in a white wine. Low detection and quantification limits were reached 11.7 and 39.1 µg/L respectively.

A Portable Smartphone-Based Sensing System Using a 3D-Printed Chip for On-Site Biochemical Assays

Recently, smartphone-based chromogenic sensing with paper-based microfluidic technology has played an increasingly important role in biochemical assays. However, generally there were three defects: (i) the paper-based chips still required complicated fabrication, and the hydrophobic boundaries on the chips were not clear enough; (ii) the chromogenic signals could not be steadily captured; (iii) the smartphone apps were restricted to the detection of specific target analytes and could not be extended for different assays unless reprogrammed. To solve these problems, in this study, a portable smartphone-based sensing system with a 3D-printed chip was developed. A 3D-printed imaging platform was designed to significantly reduce sensing errors generated during signal capture, and a brand-new strategy for signal processing in downloadable apps was established. As a proof-of-concept, the system was applied for detection of organophosphorus pesticides and multi-assay of fruit juice, showing excellent sensing performance. For different target analytes, the most efficient color channel could be selected for signal analysis, and the calibration equation could be directly set in user interface rather than programming environment, thus the developed system could be flexibly extended for other biochemical assays. Consequently, this study provides a novel methodology for smartphone-based biochemical sensing.

Procedures of determining organic trace compounds in municipal sewage sludge-a review

Sewage sludge is the largest by-product generated during the wastewater treatment process. Since large amounts of sludge are being produced, different ways of disposal have been introduced. One tempting option is to use it as fertilizer in agricultural fields due to its high contents of inorganic nutrients. This, however, can be limited by the amount of trace contaminants in the sewage sludge, containing a variety of microbiological pollutants and pathogens but also inorganic and organic contaminants. The bioavailability and the effects of trace contaminants on the microorganisms of soil are still largely unknown as well as their mixture effects. Therefore, there is a need to analyze the sludge to test its suitability before further use. In this article, a variety of sampling, pretreatment, extraction, and analysis methods have been reviewed. Additionally, different organic trace compounds often found in the sewage sludge and their methods of analysis have been compiled. In addition to traditional Soxhlet extraction, the most common extraction methods of organic contaminants in sludge include ultrasonic extraction (USE), supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), and pressurized liquid extraction (PLE) followed by instrumental analysis based on gas or liquid chromatography and mass spectrometry.

Determination of Multiresidue Pesticides in Botanical Dietary Supplements Using Gas Chromatography-Triple-Quadrupole Mass Spectrometry (GC-MS/MS)

A simplified sample preparation method in combination with gas chromatography-triple-quadrupole mass spectrometry (GC-MS/MS) analysis was developed and validated for the simultaneous determination of 227 pesticides in green tea, ginseng, gingko leaves, saw palmetto, spearmint, and black pepper samples. The botanical samples were hydrated with water and extracted with acetonitrile, magnesium sulfate, and sodium chloride. The acetonitrile extract was cleaned up using solid phase extraction with carbon-coated alumina/primary-secondary amine with or without C18. Recovery studies using matrix blanks fortified with pesticides at concentrations of 10, 25, 100, and 500 μg/kg resulted in average recoveries of 70-99% and relative standard deviation of 5-13% for all tested botanicals except for black pepper, for which lower recoveries of fortified pesticides were observed. Matrix-matched standard calibration curves revealed good linearity (r(2) > 0.99) across a wide concentration range (1-1000 μg/L). Nine commercially available tea and 23 ginseng samples were analyzed using this method. Results revealed 36 pesticides were detected in the 9 tea samples at concentrations of 2-3500 μg/kg and 61 pesticides were detected in the 23 ginseng samples at concentrations of 1-12500 μg/kg.

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy-precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01-1.0 μg mL(-1) for OCs and OPs and 0.05-2.5 μg mL(-1) for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70-120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg(-1), and the LOQs were determined as 0.01-0.049 mg kg(-1). The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.

Advancing towards universal screening for organic pollutants in waters

Environmental analytical chemists face the challenge of investigating thousands of potential organic pollutants that may be present in the aquatic environment. High resolution mass spectrometry (HRMS) hyphenated to chromatography offers the possibility of detecting a large number of contaminants without pre-selection of analytes due to its accurate-mass full-spectrum acquisition at good sensitivity. Interestingly, large screening can be made even without reference standards, as the valuable information provided by HRMS allows the tentative identification of the compound detected. In this work, hybrid quadrupole time-of-flight (QTOF) MS was combined with both liquid and gas chromatography (using a single instrument) for screening of around 2000 compounds in waters. This was feasible thanks to the use of atmospheric pressure chemical ionization source in GC. The screening was qualitatively validated for around 300 compounds at three levels (0.02, 0.1, 0.5μg/L), and screening detection limits were established. Surface, ground water and effluent wastewater samples were analyzed, detecting and identifying a notable number of pesticides and transformation products, pharmaceuticals, personal care products, and illicit drugs, among others. This is one of the most universal approaches in terms of comprehensive measurement for broad screening of organic contaminants within a large range of polarity and volatility in waters.

Benchmarking of candidate detectors for multiresidue analysis of pesticides by comprehensive two-dimensional gas chromatography

The present study discusses the relevance, performance and complementarities of flame photometric detector in phosphorus (FPD/P) and sulfur (FPD/S) modes, micro electron capture detector (μECD), nitrogen phosphorus detector (NPD), flame ionization detector (FID) and time-of-flight mass spectrometer (TOF/MS) for the comprehensive two-dimensional gas chromatography (GC×GC) analysis of pesticides. A mix of 41 pesticides including organophosphorus pesticides, synthetic pyrethroids and fungicides was investigated in order to benchmark GC×GC systems in terms of linearity (R(2)), limits of detection (LOD), and peak shape measures (widths and asymmetries). A mixture of pesticides which contained the heteroatoms phosphorus, sulfur, nitrogen and one or several halogens, was used to acquire a comparative data set to monitor relative detector performances. GC×GC datasets were systematically compared to their GC counterpart acquired with an optimized one-dimensional GC configuration. Compared with FID, considered the most appropriate detector in terms of suitability for GC×GC, the element-selective detector FPD/P and μECD best met the peak widths (0.13-0.27s for FPD/P; 0.22-0.26s for μECD) and tailing factors (0.99-1.66 for FPD/P; 1.32-1.52 for μECD); NPD exhibited similar peak widths (0.23-0.30s), but exceeded those of the above detectors for tailing factors (1.97-2.13). These three detectors had improved detection limits of 3-7 times and 4-20 times lower LODs in GC×GC mode compared with FID and TOF-MS, respectively. In contrast FPD/S had poor peak shape (tailing factor 3.36-5.12) and much lower sensitivity (10-20 fold lower compared to FPD/P). In general, element-selective detectors with favorable detection metrics can be considered viable alternatives for pesticide determination using GC×GC in complex matrices. The controversial issue of sensitivity enhancement in GC×GC was considered for optimized GC and GC×GC operation. For all detectors, we found no significant LOD enhancement in GC×GC.

Recent methodology in ginseng analysis

As much as the popularity of ginseng in herbal prescriptions or remedies, ginseng has become the focus of research in many scientific fields. Analytical methodologies for ginseng, referred to as ginseng analysis hereafter, have been developed for bioactive component discovery, phytochemical profiling, quality control, and pharmacokinetic studies. This review summarizes the most recent advances in ginseng analysis in the past half-decade including emerging techniques and analytical trends. Ginseng analysis includes all of the leading analytical tools and serves as a representative model for the analytical research of herbal medicines.

Determination of pesticide residues in ginseng by dispersive liquid-liquid microextraction and ultra high performance liquid chromatography-tandem mass spectrometry

A procedure involving acetonitrile-based extraction combined with dispersive liquid-liquid microextraction (DLLME) and detection by ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was used for determination of 39 pesticides in ginseng. The extraction of pesticide residues in ginseng was performed with acetonitrile, applying QuEChERS methodology, and the extract was further disposed by DLLME method before analyzed by UHPLC-MS/MS. The average recoveries ranged from 70 to 120% for 82% of the analytes with RSD lower than 15%. The calibration curves obtained with blank matrices were linear with a correlation coefficient of over 0.99. The limits of detection were between 0.01 and 1.0μg/kg. Matrix effects were studied by comparing solvent calibration curves and matrix-matched calibration curves. The results indicate the feasibility of this method for the determination of 39 pesticides in ginseng.

A novel approach to transforming a non-targeted metabolic profiling method to a pseudo-targeted method using the retention time locking gas chromatography/mass spectrometry-selected ions monitoring

Non-targeted metabolic profiling is the most widely used method for metabolomics. In this paper, a novel approach was established to transform a non-targeted metabolic profiling method to a pseudo-targeted method using the retention time locking gas chromatography/mass spectrometry-selected ion monitoring (RTL-GC/MS-SIM). To achieve this transformation, an algorithm based on the automated mass spectral deconvolution and identification system (AMDIS), GC/MS raw data and a bi-Gaussian chromatographic peak model was developed. The established GC/MS-SIM method was compared with GC/MS-full scan (the total ion current and extracted ion current, TIC and EIC) methods, it was found that for a typical tobacco leaf extract, 93% components had their relative standard deviations (RSDs) of relative peak areas less than 20% by the SIM method, while 88% by the EIC method and 81% by the TIC method. 47.3% components had their linear correlation coefficient higher than 0.99, compared with 5.0% by the EIC and 6.2% by TIC methods. Multivariate analysis showed the pooled quality control samples clustered more tightly using the developed method than using GC/MS-full scan methods, indicating a better data quality. With the analysis of the variance of the tobacco samples from three different planting regions, 167 differential components (p<0.05) were screened out using the RTL-GC/MS-SIM method, but 151 and 131 by the EIC and TIC methods, respectively. The results show that the developed method not only has a higher sensitivity, better linearity and data quality, but also does not need complicated peak alignment among different samples. It is especially suitable for the screening of differential components in the metabolic profiling investigation.

The power of hyphenated chromatography/time-of-flight mass spectrometry in public health laboratories

Laboratories devoted to the public health field have to face the analysis of a large number of organic contaminants/residues in many different types of samples. Analytical techniques applied in this field are normally focused on quantification of a limited number of analytes. At present, most of these techniques are based on gas chromatography (GC) or liquid chromatography (LC) coupled to tandem mass spectrometry (MS/MS). Using these techniques only analyte-specific information is acquired, and many other compounds that might be present in the samples would be ignored. In this paper, we explore the potential of time-of-flight (TOF) MS hyphenated to GC or LC to provide additional information, highly useful in this field. Thus, all positives reported by standard reference targeted LC-MS/MS methods were unequivocally confirmed by LC-QTOF MS. Only 61% of positives reported by targeted GC-MS/MS could be confirmed by GC-TOF MS, which was due to its lower sensitivity as nonconfirmations corresponded to analytes that were present at very low concentrations. In addition, the use of TOF MS allowed searching for additional compounds in large-scope screening methodologies. In this way, different contaminants/residues not included in either LC or GC tandem MS analyses were detected. This was the case of the insecticide thiacloprid, the plant growth regulator paclobutrazol, the fungicide prochloraz, or the UV filter benzophenone, among others. Finally, elucidation of unknowns was another of the possibilities offered by TOF MS thanks to the accurate-mass full-acquisition data available when using this technique.

Current use of high-resolution mass spectrometry in the environmental sciences

During the last two decades, mass spectrometry (MS) has been increasingly used in the environmental sciences with the objective of investigating the presence of organic pollutants. MS has been widely coupled with chromatographic techniques, both gas chromatography (GC) and liquid chromatography (LC), because of their complementary nature when facing a broad range of organic pollutants of different polarity and volatility. A clear trend has been observed, from the very popular GC-MS with a single quadrupole mass analyser, to tandem mass spectrometry (MS-MS) and, more recently, high-resolution mass spectrometry (HRMS). For years GC has been coupled to HR magnetic sector instruments, mostly for dioxin analysis, although in the last ten years there has been growing interest in HRMS with time-of-flight (TOF) and Orbitrap mass analyzers, especially in LC-MS analysis. The increasing interest in the use of HRMS in the environmental sciences is because of its suitability for both targeted and untargeted analysis, owing to its sensitivity in full-scan acquisition mode and high mass accuracy. With the same instrument one can perform a variety of tasks: pre- and post-target analysis, retrospective analysis, discovery of metabolite and transformation products, and non-target analysis. All these functions are relevant to the environmental sciences, in which the analyst encounters thousands of different organic contaminants. Thus, wide-scope screening of environmental samples is one of the main applications of HRMS. This paper is a critical review of current use of HRMS in the environmental sciences. Needless to say, it is not the intention of the authors to summarise all contributions of HRMS in this field, as in classic descriptive reviews, but to give an overview of the main characteristics of HRMS, its strong potential in environmental mass spectrometry and the trends observed over the last few years. Most of the literature has been acquired since 2005, coinciding with the growth and popularity of HRMS in this field, with a few exceptions that deserve to be mentioned because of their relevance.

Current mass spectrometry strategies for the analysis of pesticides and their metabolites in food and water matrices

Analysis of pesticides and their metabolites in food and water matrices continues to be an active research area closely related to food safety and environmental issues. This review discusses the most widely applied mass spectrometric (MS) approaches to pesticide residues analysis over the last few years. The main techniques for sample preparation remain solvent extraction and solid-phase extraction. The QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) approach is being increasingly used for the development of multi-class pesticide residues methods in various sample matrices. MS detectors-triple quadrupole (QqQ), ion-trap (IT), quadrupole linear ion trap (QqLIT), time-of-flight (TOF), and quadrupole time-of-flight (QqTOF)-have been established as powerful analytical tools sharing a primary role in the detection/quantification and/or identification/confirmation of pesticides and their metabolites. Recent developments in analytical instrumentation have enabled coupling of ultra-performance liquid chromatography (UPLC) and fast gas chromatography (GC) with MS detectors, and faster analysis for a greater number of pesticides. The newly developed "ambient-ionization" MS techniques (e.g., desorption electrospray ionization, DESI, and direct analysis in real time, DART) hyphenated with high-resolution MS platforms without liquid chromatography separation, and sometimes with minimum pre-treatment, have shown potential for pesticide residue screening. The recently introduced Orbitrap mass spectrometers can provide high resolving power and mass accuracy, to tackle complex analytical problems involved in pesticide residue analysis.

Isolation and analysis of ginseng: advances and challenges

Ginseng occupies a prominent position in the list of best-selling natural products in the world. Because of its complex constituents, multidisciplinary techniques are needed to validate the analytical methods that support ginseng's use worldwide. In the past decade, rapid development of technology has advanced many aspects of ginseng research. The aim of this review is to illustrate the recent advances in the isolation and analysis of ginseng, and to highlight new applications and challenges. Emphasis is placed on recent trends and emerging techniques.

Multiresidue pesticide analysis by capillary gas chromatography-mass spectrometry

A multiresidue pesticide method using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) procedure and capillary gas chromatography-mass spectrometry (GC-MS) is described for the determination of 166 organochlorine, organophosphorus, and pyrethroid pesticides, metabolites, and isomers in spinach. The pesticides from spinach were extracted using acetonitrile saturated with magnesium sulfate and sodium chloride, followed by solid-phase dispersive cleanup using primary-secondary amine and graphitized carbon black sorbents and toluene. Analysis is performed using different GC-MS techniques emphasizing the benefits of non-targeted acquisition and targeted screening procedures. Non-targeted data acquisition of pesticides in the spinach was demonstrated using GC coupled to a single quadrupole mass spectrometery (GC-MS) in full scan mode or multidimensional GC-time-of-flight mass spectrometery (GC  ×  GC-TOF/MS), along with deconvolution software and libraries. Targeted screening was achieved using GC-single quadrupole mass spectrometry in selective ion monitoring (GC-MS/SIM) mode or -tandem mass spectrometry (GC-MS/MS) in multiple reaction monitoring mode. The development of these techniques demonstrates the powerful use of GC-MS for the screening, identification, and quantitation of pesticide residues in foods.

Multiresidue method for pesticides and persistent organic pollutants (POPs) in milk and cream using comprehensive two-dimensional capillary gas chromatography-time-of-flight mass spectrometry

A method for the analysis of pesticides and their metabolites including most of the persistent organic pollutants (POPs) in milk and cream is described. The method was single-laboratory validated through milk fortification in quadruplicate with 34 pesticides, isomers, and metabolites including 12 of the insecticide POPs and their metabolites. Whole cow's milk was fortified at 0.2, 0.4, 1, 2, 10, or 50 microg/kg wet weight and extracted with acetone/cyclohexane/ethyl acetate (2:1:1) with the addition of Mg(2)SO(4) and NaCl. Fat recovered in the extract accurately reflected the fat content of the milk or cream. All test portions were purified on a gel permeation chromatograph (GPC) followed by solid phase extraction (SPE) cleanup on a mixed bed graphitized carbon black (GCB) and primary/secondary amine silica gel (PSA) column before determination using a comprehensive two-dimensional gas chromatograph interfaced to a time-of-flight mass spectrometer. Average recoveries were 77, 72, 73, 66, 77, and 84% for 0.2, 0.4, 1, 2, 10, and 50 microg/kg wet weight whole milk, respectively. The average relative standard deviations for 0.2, 0.4, 1, 2, 10, and 50 microg/kg were 10, 8, 7, 7, 3, and 3%, respectively. The limits of quantification (LOQs) for all pesticides were 0.2 or 0.4 microg/kg wet weight. An archived cream sample collected in 1982 on Oahu, Hawaii, was found to contain only hepatachlor epoxide (HE) and DDE-p,p' at 380 +/- 24 and 69 +/- 17 microg/kg fat, significantly elevated over the current action level of 50 microg/kg fat for HE.