Enhanced electron transfer dissociation through fixed charge derivatization of cysteines

Qualitative and Quantitative Mass Spectrometry in Salivary Metabolomics and Proteomics

The metabolomics and proteomics analysis of saliva, an excellent biofluid that is a rich source of biological compounds, allows for the safe and frequent screening of drugs, their metabolites, and molecular biomarkers of various diseases. One of the most frequently used analytical methods in saliva analysis is liquid chromatography coupled with mass spectrometry (LC-MS) and tandem mass spectrometry. The low ionisation efficiency of some compounds and a complex matrix makes their identification by MS difficult. Furthermore, quantitative analysis by LC-MS frequently cannot be performed without isotopically labelled standards, which usually have to be specially synthesised. This review presented reports on qualitative and quantitative approaches in salivary metabolomics and proteomics. The purpose of this manuscript was to present the challenges, advances, and future prospects of mass spectrometry, both in the analysis of salivary metabolites and proteins. The presented review should appeal to those interested in the recent advances and trends in qualitative and quantitative mass spectrometry in salivary metabolomics and proteomics, which may facilitate a diagnostic accuracy, the evaluation of treatment efficacy, the early diagnosis of disease, and a forensic investigation of some unapproved drugs for any medical or dietary administration.

Protein cysteine S-glycosylation: oxidative hydrolysis of protein S-glycosidic bonds in aqueous alkaline environments

Some glycoproteins contain carbohydrates S-linked to cysteine (Cys) residues. However, relatively few S-glycosylated proteins have been detected, due to the lack of an effective research methodology. This work outlines a general concept for the detection of S-glycosylation sites in proteins. The approach was verified by exploratory experiments on a model mixture of β-S-glucosylated polypeptides obtained by the chemical transformation of lysozyme P00698. The model underwent two processes: (1) oxidative hydrolysis of S-glycosidic bonds under alkaline conditions to expose the thiol group of Cys residues; (2) thiol S-alkylation leading to thiol S-adduct formation at the former S-glycosylation sites. Oxidative hydrolysis was conducted in aqueous urea, dimethyl sulfoxide, or trifluoroethanol, with silver nitrate as the reaction promoter, in the presence of triethylamine and/or pyridine. The concurrent formation of stable protein silver thiolates, gluconic acid, and silver nanoclusters was observed. The essential de-metalation of protein silver thiolates using dithiothreitol preceded the S-labeling of Cys residues with 4-vinyl pyridine or a fluorescent reagent. The S-labeled model was sequenced by tandem mass spectrometry to obtain data on the modifications and their distribution over the protein chains. This enabled the efficiency of both S-glycosidic bonds hydrolysis and S-glycosylation site labeling to be evaluated. Suggestions are also given for testing this novel strategy on real proteomic samples.

Catch, Modify and Analyze: Methods of Chemoselective Modification of Cysteine-Containing Peptides

One effective solution in the analysis of complex mixtures, including protein or cell hydrolysates, is based on chemoselective derivatization of a selected group of compounds by using selective tags to facilitate detection. Another method is based on the capture of the desired compounds by properly designed solid supports, resulting in sample enrichment. Cysteine is one of the rarest amino acids, but at least one cysteine residue is present in more than 91% of human proteins, which clearly confirms its important role in biological systems. Some cysteine-containing peptides may serve as significant molecular biomarkers, which may emerge as key indices in the management of patients with particular diseases. In the current review, we describe recent advances in the development of cysteine-containing peptide modification techniques based on solution and solid phase derivatization and enrichment strategies.

Options of the Main Derivatization Approaches for Analytical ESI and MALDI Mass Spectrometry

The inclusion of preliminary chemical labeling (derivatization) in the analysis process by such powerful and widespread methods as electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is a popular and widely used methodological approach. This is due to the need to remove some fundamental limitations inherent in these powerful analytic methods. Although a number of special reviews has been published discussing the utilization of derivatization approaches, the purpose of the present critical review is to comprehensively summarize, characterize and evaluate most of the previously developed and practically applied, as well as recently proposed representative derivatization reagents for ESI-MS and MALDI-MS platforms in their mostly sensitive positive ion mode and frequently hyphenated with separation techniques. The review is focused on the use of preliminary chemical labeling to facilitate the detection, identification, structure elucidation, quantification, profiling or MS imaging of compounds within complex matrices. Two main derivatization approaches, namely the introduction of permanent charge-fixed or highly proton affinitive residues into analytes are critically evaluated. In situ charge-generation, charge-switch and charge-transfer derivatizations are considered separately. The potential of using reactive matrices in MALDI-MS and chemical labeling in MS-based omics sciences is given.

O-GlcNAc Site Mapping by Using a Combination of Chemoenzymatic Labeling, Copper-Free Click Chemistry, Reductive Cleavage, and Electron-Transfer Dissociation Mass Spectrometry

As a dynamic post-translational modification, O-linked β- N-acetylglucosamine ( O-GlcNAc) modification (i.e., O-GlcNAcylation) of proteins regulates many biological processes involving cellular metabolism and signaling. However, O-GlcNAc site mapping, a prerequisite for site-specific functional characterization, has been a challenge since its discovery. Herein we present a novel method for O-GlcNAc enrichment and site mapping. In this method, the O-GlcNAc moiety on peptides was labeled with UDP-GalNAz followed by copper-free azide-alkyne cycloaddition with a multifunctional reagent bearing a terminal cyclooctyne, a disulfide bridge, and a biotin handle. The tagged peptides were then released from NeutrAvidin beads upon reductant treatment, alkylated with (3-acrylamidopropyl)trimethylammonium chloride, and subjected to electron-transfer dissociation mass spectrometry analysis. After validation by using standard synthetic peptide gCTD and model protein α-crystallin, such an approach was applied to the site mapping of overexpressed TGF-β-activated kinase 1/MAP3K7 binding protein 2 (TAB2), with four O-GlcNAc sites unambiguously identified. Our method provides a promising tool for the site-specific characterization of O-GlcNAcylation of important proteins.

Replacing H+ by Na+ or K+ in phosphopeptide anions and cations prevents electron capture dissociation

By successively replacing H+ by Na+ or K+ in phosphopeptide anions and cations, we show that the efficiency of fragmentation into c and z˙ or c˙ and z fragments from N-Cα backbone bond cleavage by negative ion electron capture dissociation (niECD) and electron capture dissociation (ECD) substantially decreases with increasing number of alkali ions attached. In proton-deficient phosphopeptide ions with a net charge of 2-, we observed an exponential decrease in electron capture efficiency with increasing number of Na+ or K+ ions attached, suggesting that electrons are preferentially captured at protonated sites. In proton-abundant phosphopeptide ions with a net charge of 3+, the electron capture efficiency was not affected by replacing up to four H+ ions with Na+ or K+ ions, but the yield of c, z˙ and c˙, z fragments from N-Cα backbone bond cleavage generally decreased next to Na+ or K+ binding sites. We interpret the site-specific decrease in fragmentation efficiency as Na+ or K+ binding to backbone amide oxygen in competition with interactions of protonated sites that would otherwise lead to backbone cleavage into c, z˙ or c˙, z fragments. Our findings seriously challenge the hypothesis that the positive charge responsible for ECD into c, z˙ or c˙, z fragments can generally be a sodium or other metal ion instead of a proton.

High-Confidence Sequencing of Phosphopeptides by Electron Transfer Dissociation Mass Spectrometry Using Dinuclear Zinc(II) Complex

Phosphorylation is the most abundant protein modification, and tandem mass spectrometry (MS²) with electron transfer dissociation (ETD) has proven to be a promising method for phosphoproteomic applications owing to its ability to determine phosphorylation sites on proteins. However, low precursor charge states hinder the ability to obtain useful information through peptide sequencing by ETD, and the presence of acidic phosphate groups contributes to a low charge state of peptide ions. In the present report, we used a dinuclear zinc complex, (Zn₂L)³⁺ (L = alkoxide form of 1,3-bis[bis(pyridin-2-ylmethyl)amino]propan-2-ol) for electrospray ionization (ESI), followed by ETD-MS² analysis. Since (Zn₂L)³⁺ selectively bound to phosphopeptide with addition of a positive charge per phosphate group, the use of (Zn₂L)³⁺ for ESI improved the ionization yield of phosphopeptides in phosphoprotein digest. Additionally, an increase in the charge state of phosphopeptides were observed by addition of (Zn₂L)³⁺, facilitating phosphopeptide sequencing by ETD-MS². Since the binding between (Zn₂L)³⁺ and the phosphate group was retained during the ETD process, a comparison between the ETD mass spectra obtained using two dinuclear zinc complex derivatives containing different zinc isotopes, namely (⁶⁴Zn₂L)³⁺ and (⁶⁸Zn₂L)³⁺, provided information about the number of phosphate groups in each fragment ion, allowing the phosphorylation site to be unambiguously determined. The details of the fragmentation processes of the (Zn₂L)³⁺-phosphopeptide complex were investigated using a density functional theory calculation. As in the case of protonated peptides, ETD induced peptide backbone dissociation in the (Zn₂L)³⁺-phosphopeptide complex proceeded through an aminoketyl radical intermediate.

Quantification of peptides using N-terminal isotope coding and C-terminal derivatization for sensitive analysis by micro liquid chromatography-tandem mass spectrometry

Stable isotope-coding coupled with mass spectrometry is a popular method for quantitative proteomics and peptide quantification. However, the efficiency of the derivatization reaction at a particular functional group, especially in complex structures, can affect accuracy. Here, we present a dual functional-group derivatization of bioactive peptides followed by micro liquid chromatography-tandem mass spectrometry (LC-MS/MS). By separating the sensitivity-enhancement and isotope-coding derivatization reactions, suitable chemistries can be chosen. The peptide amino groups were reductively alkylated with acetaldehyde or acetaldehyde-d₄ to afford N-alkylated products with different masses. This process is simple, quick and high-yield, and accurate comparative analysis can be achieved for the mass-differentiated peptides. Then, the carboxyl groups were derivatized with 1-(2-pyrimidinyl)piperazine to increase MS/MS sensitivity. Angiotensins I-IV, bradykinin and neurotensin were analyzed after online solid phase extraction by micro LC-MS/MS. In all instances, a greater than 17-fold increase in sensitivity was achieved, compared with the analyses of the underivatized peptides. Furthermore, the values obtained from the present method were in agreement with the result from isotope dilution quantification using isotopically labeled angiotensin I [Asp-Arg-(Val-d₈ )-Tyr-Ile-His-Pro-(Phe-d₈ )-His-Leu]. Copyright © 2016 John Wiley & Sons, Ltd.

Novel pyridinium-based tags: synthesis and characterization for highly efficient analysis of thiol-containing peptides by mass spectrometry

In this study, a novel type of pyridinium-based tags, 1-[3-[(2-iodo-1-oxoethyl)amino]propyl]-4-methylpyridinium bromide (IMP) and 1-[3-[(2-iodo-1-oxoethyl)amino]propyl]-4-propylpyridinium bromide (IPP), were designed, synthesized, and applied to the derivatization of thiol-containing peptides. With model peptides as the sample, the labeling efficiency and the stability of the peptide derivatives were investigated. The results indicate that nearly 100% derivatization yield was achieved with the developed tags and the peptide derivatives were stable at room temperature for at least one week. Furthermore, improved ionization efficiency and increased charge states were achieved via both matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MS) and electrospray ionization (ESI) MS, of which IPP exhibited the more obvious improvement of ionization efficiency. Further analysis of tryptic digests of bovine serum albumin (BSA) and α-transferrin, showed that increased identification efficiency of the thiol-containing peptides was achieved by combination with IMP or IPP derivatization. For example, the identification efficiency of the thiol-containing peptides of α-transferrin increased more than 42% upon combination with the IMP or IPP derivatives. We anticipate the novel tags are promising for highly efficient thiol-containing peptide identification in proteome research, especially for low concentrations.

Electron transfer dissociation mass spectrometry of peptides containing free cysteine using group XII metals as a charge carrier

Electron transfer dissociation (ETD) has been used for peptide sequencing. Since ETD preferentially produces the c'/z(•) fragment pair, peptide sequencing is generally performed by interpretation of mass differences between series of consecutive c' and z(•) ions. However, the presence of free cysteine residues in a precursor promotes peptide bond cleavage, hindering interpretation of the ETD spectrum. In the present study, the divalent group XII metals, such as Zn(2+), Cd(2+) and Hg(2+), were used as charge carriers to produce metal-peptide complexes. The thiol group is deprotonated by complexation with the group XII metal. The formation of b and y' ions was successfully suppressed by using the zinc-peptide complex as a precursor, indicating Zn(2+)-aided ETD to be a useful method for sequencing of cysteine-containing peptides. By contrast, ETD of Cd(2+)- and Hg(2+)-peptide complexes mainly led to SH2 loss and radical cation formation, respectively. These processes were mediated by recombination energy between the metal cation and an electron. The presence of monovalent cadmium and neutral mercury in ETD products was confirmed by MS(3) analysis with collision-induced dissociation.

Imidazolium-based iodoacetamide functional tags: design, synthesis, and property study for cysteinyl-peptide analysis by mass spectrometry

New types of imidazolium-based iodoacetamide tags were designed, synthesized and further exploited for cysteinyl-peptide analysis with superior labeling efficiency, high stability, improved ionization efficiency, and increased charge states by mass spectrometry. For the first time, the effects of these kinds of tags on the mass spectrometry performance of the derivatized peptides were investigated, which is of great importance to help us design more efficient tags for the analysis of peptides or proteins, especially for those with low abundance.

Development of a novel imidazolium-based aromatic quaternary ammonium tag: synthesis and application to the efficient analysis of cysteinyl-peptides by mass spectrometry

RATIONALE

Chemical derivatization is a very promising technique for improving analysis of peptides by mass spectrometry (MS). In this study, a novel kind of imidazolium-based aromatic quaternary ammonium tag, 1-[3-[(2-iodo-1-oxoethyl)amino]propyl]-3-butylimidazolium bromide (IPBI), designed with strong gas-phase basicity and a permanent positive charge, was firstly synthesized and further used for derivatization of cysteinyl-peptides with improved ionization efficiency and higher charge states.

METHODS

Both the model peptides and tryptic digests of proteins were used to evaluate the effect of IPBI derivatization on the MS performance of the derivatized peptides, and the results were further compared with the commonly used iodoacetamide (IAA) tag. Matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF)-MS and electrospray ionization (ESI)-MS were used to evaluate the ionization efficiency and charge states of the derivatized peptides.

RESULTS

With model peptides as samples, a nearly 100% derivatization efficiency and superior stability were achieved via IPBI derivatization. By further analysis of both standard peptides and tryptic protein digests, the ionization efficiency and charge states of IPBI-derivatized peptides could be remarkably improved. For example, for protein bovine serum albumin, compared with the commercial available IAA tag, the identification efficiency of cysteinyl-peptides was increased about 67% by combining with IPBI derivatization.

CONCLUSIONS

The results indicated that the novel tag is an effective derivatization reagent for cysteinyl-peptide identification. We hope it could be further used for high-efficiency cysteinyl-peptide identification in proteome research, especially those with low abundance and poor ionization efficiency.

Chemical derivatization of peptide carboxyl groups for highly efficient electron transfer dissociation

The carboxyl groups of tryptic peptides were derivatized with a tertiary or quaternary amine labeling reagent to generate more highly charged peptide ions that fragment efficiently by electron transfer dissociation (ETD). All peptide carboxyl groups-aspartic and glutamic acid side-chains as well as C-termini-were derivatized with an average reaction efficiency of 99 %. This nearly complete labeling avoids making complex peptide mixtures even more complex because of partially-labeled products, and it allows the use of static modifications during database searching. Alkyl tertiary amines were found to be the optimal labeling reagent among the four types tested. Charge states are substantially higher for derivatized peptides: a modified tryptic digest of bovine serum albumin (BSA) generates ~90% of its precursor ions with z  >  2, compared with less than 40 % for the unmodified sample. The increased charge density of modified peptide ions yields highly efficient ETD fragmentation, leading to many additional peptide identifications and higher sequence coverage (e.g., 70 % for modified versus only 43 % for unmodified BSA). The utility of this labeling strategy was demonstrated on a tryptic digest of ribosomal proteins isolated from yeast cells. Peptide derivatization of this sample produced an increase in the number of identified proteins, a >50 % increase in the sequence coverage of these proteins, and a doubling of the number of peptide spectral matches. This carboxyl derivatization strategy greatly improves proteome coverage obtained from ETD-MS/MS of tryptic digests, and we anticipate that it will also enhance identification and localization of post-translational modifications.

Improved proteomic analysis pipeline for LC-ETD-MS/MS using charge enhancing methods

Electron transfer dissociation (ETD) is a useful and complementary activation method for peptide fragmentation in mass spectrometry. However, ETD spectra typically receive a relatively low score in the identifications of 2+ ions. To overcome this challenge, we, for the first time, systematically interrogated the benefits of combining ion charge enhancing methods (dimethylation, guanidination, m-nitrobenzyl alcohol (m-NBA) or Lys-C digestion) and differential search algorithms (Mascot, Sequest, OMSSA, pFind and X!Tandem). A simple sample (BSA) and a complex sample (AMJ2 cell lysate) were selected in benchmark tests. Clearly distinct outcomes were observed through different experimental protocol. In the analysis of AMJ2 cell lines, X!Tandem and pFind revealed 92.65% of identified spectra; m-NBA adduction led to a 5-10% increase in average charge state and the most significant increase in the number of successful identifications, and Lys-C treatment generated peptides carrying mostly triple charges. Based on the complementary identification results, we suggest that a combination of m-NBA and Lys-C strategies accompanied by X!Tandem and pFind can greatly improve ETD identification.

Enhanced electron transfer dissociation of peptides modified at C-terminus with fixed charges

The impact of the conversion of carboxylates in peptides to basic or fixed charge sites on the outcome of electron transfer dissociation (ETD) is evaluated with respect to ETD efficiency and the number of diagnostic sequence ions. Four reagents, including benzylamine (BA), 1-benzylpiperazine (BZP), carboxymethyl trimethylammonium chloride hydrazide (GT), and (2-aminoethyl)trimethylammonium chloride hydrochloride (AETMA), were used for the carboxylate derivatization, with the first two replacing the acidic carboxylate groups with basic functionalities and the latter two introducing fixed charge sites. The ETD efficiencies and Xcorr scores were compared for both nonderivatized and derivatized tryptic and Glu-C peptides from cytochrome c. Derivatization of the carboxylate increases the average charge states, the number of fragment ions, and the dissociation efficiencies of peptides, especially for the fixed charge reagent, AETMA.

Electrochemistry-assisted top-down characterization of disulfide-containing proteins

Covalent disulfide bond linkage in a protein represents an important challenge for mass spectrometry (MS)-based top-down protein structure analysis as it reduces the backbone cleavage efficiency for MS/MS dissociation. This study presents a strategy for solving this critical issue via integrating electrochemistry (EC) online with a top-down MS approach. In this approach, proteins undergo electrolytic reduction in an electrochemical cell to break disulfide bonds and then undergo online ionization into gaseous ions for analysis by electron-capture dissociation (ECD) and collision-induced dissociation (CID). The electrochemical reduction of proteins allows one to remove disulfide bond constraints and also leads to increased charge numbers of the resulting protein ions. As a result, sequence coverage was significantly enhanced, as exemplified by β-lactoglobulin A (24 vs 75 backbone cleavages before and after electrolytic reduction, respectively) and lysozyme (5 vs 66 backbone cleavages before and after electrolytic reduction, respectively). This methodology is fast and does not need chemical reductants, which would have an important impact in high-throughput proteomics research.

Sulfonium ion derivatization, isobaric stable isotope labeling and data dependent CID- and ETD-MS/MS for enhanced phosphopeptide quantitation, identification and phosphorylation site characterization

An amine specific peptide derivatization strategy involving the use of novel isobaric stable isotope encoded 'fixed charge' sulfonium ion reagents, coupled with an analysis strategy employing capillary HPLC, ESI-MS, and automated data dependent ion trap CID-MS/MS, -MS(3), and/or ETD-MS/MS, has been developed for the improved quantitative analysis of protein phosphorylation, and for identification and characterization of their site(s) of modification. Derivatization of 50 synthetic phosphopeptides with S,S'-dimethylthiobutanoylhydroxysuccinimide ester iodide (DMBNHS), followed by analysis using capillary HPLC-ESI-MS, yielded an average 2.5-fold increase in ionization efficiencies and a significant increase in the presence and/or abundance of higher charge state precursor ions compared to the non-derivatized phosphopeptides. Notably, 44% of the phosphopeptides (22 of 50) in their underivatized states yielded precursor ions whose maximum charge states corresponded to +2, while only 8% (4 of 50) remained at this maximum charge state following DMBNHS derivatization. Quantitative analysis was achieved by measuring the abundances of the diagnostic product ions corresponding to the neutral losses of 'light' (S(CH(3))(2)) and 'heavy' (S(CD(3))(2)) dimethylsulfide exclusively formed upon CID-MS/MS of isobaric stable isotope labeled forms of the DMBNHS derivatized phosphopeptides. Under these conditions, the phosphate group stayed intact. Access for a greater number of peptides to provide enhanced phosphopeptide sequence identification and phosphorylation site characterization was achieved via automated data-dependent CID-MS(3) or ETD-MS/MS analysis due to the formation of the higher charge state precursor ions. Importantly, improved sequence coverage was observed using ETD-MS/MS following introduction of the sulfonium ion fixed charge, but with no detrimental effects on ETD fragmentation efficiency.

Tandem MS analysis of selenamide-derivatized peptide ions

Our previous study showed that selenamide reagents such as ebselen and N-(phenylseleno)phthalimide (NPSP) can be used for selective and rapid derivatization of protein/peptide thiols in high conversion yield. This paper reports the systematic investigation of MS/MS dissociation behaviors of selenamide-derivatized peptide ions upon collision induced dissociation (CID) and electron transfer dissociation (ETD). In the positive ion mode, derivatized peptide ions exhibit tag-dependent CID dissociation pathways. For instance, ebselen-derivatized peptide ions preferentially undergo Se-S bond cleavage upon CID to produce a characteristic fragment ion, the protonated ebselen (m/z 276), which allows selective identification of thiol peptides from protein digest as well as selective detection of thiol proteins from protein mixture using precursor ion scan (PIS). In contrast, NPSP-derivatized peptide ions retain their phenylselenenyl tags during CID, which is useful in sequencing peptides and locating cysteine residues. In the negative ion CID mode, both types of tags are preferentially lost via the Se-S cleavage, analogous to the S-S bond cleavage during CID of disulfide-containing peptide anions. In consideration of the convenience in preparing selenamide-derivatized peptides and the similarity of Se-S of the tag to the S-S bond, we also examined ETD of the derivatized peptide ions to probe the mechanism for electron-based ion dissociation. Interestingly, facile cleavage of Se-S bond occurs to the peptide ions carrying either protons or alkali metal ions, while backbone cleavage to form c/z ions is severely inhibited. These results are in agreement with the Utah-Washington mechanism proposed for depicting electron-based ion dissociation processes.

Piperazines for peptide carboxyl group derivatization: effect of derivatization reagents and properties of peptides on signal enhancement in matrix-assisted laser desorption/ionization mass spectrometry

Piperazine-based derivatives, including 1-(2-pyridyl)piperazine (2-PP), 1-(2-pyrimidyl)piperazine (2-PMP), 1-(4-pyridyl)piperazine (4-PP), and 1-(1-methyl-4-piperidinyl)piperazine (M-PP), were used for the derivatization of carboxyl groups on peptides with 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and 1-hydroxy-7-azabenzotriazole (HOAt) as coupling reagents, and trifluoroacetic acid (TFA) as activator. Taking synthetic peptides RVYVHPI (RI-7) and APGDRIYVHPF (AF-11) as samples, the yields of derivatized peptides by 2-PP, 2-PMP and 4-PP were higher than 94%. The effect of piperazine derivatives on the signals of tryptic digests of α-transferrin and bovine serum albumin (BSA) was investigated, and it was found that peptides derivatized by 2-PP and 2-PMP exhibited obviously improved ionization efficiency. Furthermore, comparison of identified peptides before and after derivatization showed that peptides with low molecular weight (MW) and high pI value were preferably detected after derivatization. In addition, after derivatization with 2-PP and 2-PMP, protein myelin basic protein S, 20 kDa protein, and histone H were confidently identified from the tryptic digests of two fractions of rat brain protein separated by reversed-phase high-performance liquid chromatography (HPLC), indicating the potential application of 2-PP and 2-PMP for the highly sensitive determination of peptides in comprehensive proteome analysis.

Clustered O-glycans of IgA1: defining macro- and microheterogeneity by use of electron capture/transfer dissociation

IgA nephropathy (IgAN) is the most common primary glomerulonephritis in the world. Aberrantly glycosylated IgA1, with galactose (Gal)-deficient hinge region (HR) O-glycans, plays a pivotal role in the pathogenesis of the disease. It is not known whether the glycosylation defect occurs randomly or preferentially at specific sites. We have described the utility of activated ion-electron capture dissociation (AI-ECD) mass spectrometric analysis of IgA1 O-glycosylation. However, locating and characterizing the entire range of O-glycan attachment sites are analytically challenging due to the clustered serine and threonine residues in the HR of IgA1 heavy chain. To address this problem, we analyzed all glycoforms of the HR glycopeptides of a Gal-deficient IgA1 myeloma protein, mimicking the aberrant IgA1 in patients with IgAN, by use of a combination of IgA-specific proteases + trypsin and AI-ECD Fourier transform ion cyclotron resonance (FT-ICR) tandem mass spectrometry (MS/MS). The IgA-specific proteases provided a variety of IgA1 HR fragments that allowed unambiguous localization of all O-glycosylation sites in the six most abundant glycoforms, including the sites deficient in Gal. Additionally, this protocol was adapted for on-line liquid chromatography (LC)-AI-ECD MS/MS and LC-electron transfer dissociation MS/MS analysis. Our results thus represent a new clinically relevant approach that requires ECD/electron transfer dissociation-type fragmentation to define the molecular events leading to pathogenesis of a chronic kidney disease. Furthermore, this work offers generally applicable principles for the analysis of clustered sites of O-glycosylation.